Characterised control valve (CCV) with adjustable flow rate and sensoroperated flow control, power control, and power and energy-monitoring function

Transcription

1 Belim Energy Valve TM web server manual EV..R+BAC P6..W..EV-BAC Characterised cntrl valve (CCV) with adjustable flw rate and sensrperated flw cntrl, pwer cntrl, and pwer and energy-mnitring functin Cntents General 2 Web server 3 Attachment 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 1 / 19

2 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring General Versins Infrmatin This manual relates t the fllwing listed prducts with a prductin date frm 31 st March Belim Energy Valve TM DN15 t DN50 EV0..R+(K)BAC(1) Belim Energy Valve TM DN65 t DN150 P..W..EV-(K)BAC Earlier versins might have different views and functins. In case f dubt, please cntact yur Belim Representative. Requirements Fr a direct-access a PC with an installed web brwser and a netwrk cable (RJ45) is needed. The fllwing web brwsers are supprted: Micrsft Internet Explrer Mzilla Firefx Safari n platfrm ios Standard web brwser n platfrm Andrid: Gingerbread Hneycmb Ice Cream Sandwich Jelly Bean The fllwing web brwsers are NOT supprted: Micrsft Edge T display the trend views in the web brwser, the "Adbe Flash Player" has t be installed. Dwnlad f the newest versin: The current versin f Java has t be installed. Dwnlad: Access t the Energy Valve Cnnectin Cnnect the PC/Laptp t the Energy Valve with the RJ45 cable Nte: The Energy Valve must be supplied with vltage. 2 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

3 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Access t the Energy Valve by means f a "Peer t Peer" cnnectin Easy access t the valve pssible. The IP address has nt t be knwn. The fllwing cnditins have t be cnsidered: Direct cnnectin valve PC. This access methd cannt be used in a netwrk with ther devices. N static IP address is cnfigured N alternative IP address is cnfigured DHCP mde is set Open Internet Explrer and enter the fllwing address: Access t the Energy Valve by means f the IP address As an alternative t the "Peer t Peer" cnnectin an access by using the IP address is als pssible. This type f cnnectin can be used in a netwrk with several devices. In case f several Energy Valves in the netwrk different IP addresses must be assigned first is the IP address assigned at the time f delivery Open Internet Explrer and enter the fllwing address: T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 3 / 19

4 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring User name and passwrd Access t the Energy Valve is passwrd-prtected 3 users have different reading and writing access Legend: L = Read access S = Write access - = Page is nt displayed 1) = Please cntact yur Belim Representative 2) = Units can be written 4 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

5 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Startup Assistant The startup assistant is pened right after the start. The Startup-Assistant helps t d the main settings f the Belim Energy Valve right at the beginning. The fllwing steps appear: First step: If a usage is desired fr the Belim Clud, the details can be specified in the first step. If the peratr f the Energy Valve decides t use the Belim Clud, he agrees t the General Terms and Cnditins. Fr further details see: Clud accunt If the user already has a Belim Clud accunt, he can enter the address here. Allw autmatic updates: Receive sftware updates and allw Belim t install them n the device. After updating, the device is autmatically restarted and all settings are retained. Activate Clud Services: Here yu can activate the clud services, Delta-T ptimizatin and supprt via Clud. Clud services: After deactivating the clud services, the fllwing is n lnger available: Delta-T ptimizatin via the clud, nline supprt and remte cnfiguratin. Secnd step: The details fr the valve can be filled in here, e.g. lcatin f the installatin, applicatin details r the building address T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 5 / 19

6 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Step Fur: Setting the respective bus prtcls Language selectin The language displayed n the web server is selected autmatically accrding t the current PC settings Available languages Deutsch Englisch Spanisch Französisch Kratisch Magyar-Englisch (Ungarn) Italienisch Japanisch Kreanisch Mazednisch Hlländisch Plnisch Prtugiesisch Russisch Slwakisch Slwenisch Serbisch Schwedisch Chinesisch (Mandarin) If the language is nt available, English is selected as the display language If necessary, the display language can be selected manually 6 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

7 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Overview In additin t the mst imprtant values f the valve, this page shws the fllwing additinal values: Status Cntrl functin Setpint DDC Delta temperature Delta-T Limiting status Settings - Applicatin All settings can be made n this page. Nte The varius setting ptins are explained in detail belw. T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 7 / 19

8 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings Override The current cntrl signal can be verridden with the help f the Override functin. Nte The definitin f the values Vnm, Vmax, Pnm and Pmax is prvided in the Appendix t this dcument. The fllwing ptins are available: Aut: N manual verride Clse: Valve is clsed Open: Valve is pened cmpletely Vnm: The nminal flw rate f the valve (catalgue value) is cntrlled 1) Vmax: The set maximum vlumetric flw (100% requirement) is cntrlled Mtr stp: The actuatr remains at its current psitin Pnm: The nminal pwer Q'nm f the valve is cntrlled 1) Pmax: The set maximum pwer Q'max (100% requirement) is cntrlled Simulated peratin: In simulated peratin, the energy valve is laded with nn-real input data. Fr example, it is pssible t display all functins during a custmer visit. 1) As Vnm/Pnm may be greater than the maximum required (set) Vmax/Pmax f the installatin, achieving the nminal value is dependent n the utput f the pump. The verride functin is deactivated autmatically after 2 hurs. The time remaining befre deactivatin is displayed Settings - Applicatin The setting f the cable length may nt be changed! The cables between valve unit and temperature sensrs may nt be either shrtened r lengthened. Installatin psitin The crrect setting is imprtant fr the allcatin f the cnsumed energy as cling r heating energy Valve in return pipe Valve in supply pipe Media Selectin f the medium used: Water Mnethylenglycl 1.2 Plyprpylenglycl Cncentratin Percentage cncentratin f the glycl The selectin is nly displayed when 'Mnethylenglycl' r '1.2 Plyprpylenglycl' has been selected Cable length The cable length f the sensr which is away frm the valve is setted t the crrect value f 3 meters (DN15 DN50) r 10 meters (DN65 150) ex wrks. 8 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

9 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings - units Setting f the value units Temperature Pwer C (*) W F kw (*) K BTU/h Flw rate kbtu/h m 3 /h Tn m 3 /s Energy l/s J l/min (*) kwh (*) l/h MWh gpm kbtu cfm TnH MJ GJ (*) = presetting ex-wrks Nte Settings analg feedback Feedback Infrmatin: U5 crrespnds t ne f the fllwing values. The units crrespnd t the units set in the 'User' range. Flw: Flw rate Pwer: Current cnsumer pwer T supply: Supply temperature These settings cnfigure the analg feedback signal U5 T return: Return temperature Delta T: Differential temperature, supply and return Valve Psitin: Valve pening angle [ ] Feedback signal range: 0 10 VDC VDC 2 10 VDC Maximum: Setting the maximum value fr the feedback signal 10 V = set value Minimum: Setting the minimum value fr the feedback signal 0 V = set value Only displayed when 'T supply' r 'T return' has been selected 0 V crrespnds t the value 0 with all ther selectins T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 9 / 19

10 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings Cntrl Settings Parameterisatin f the analgue cntrl signal Y Setpint Surce Analgue Bus Cntrl mde Psitin cntrl: In this setting, the valve functins as a pressuredependent valve, e.g. like a cnventinal characterized cntrl valve Flw cntrl: Operatin as a pressureindependent valve analgus t an EPIV Pwer cntrl: The cntrl signal requests directly a certain pwer utput at the exchanger. The valve wrks temperature- and pressure - independent Cntrl signal range VDC 2 10 VDC Invert cntrl signal n: n inversin 0V = valve clsed / 10V = valve pen yes: inversin 10V = valve clsed / 0V = valve pen Cntrl signal characteristics equal percentage: equal-percentage characteristic curve linear: linear characteristic curve This selectin is nt available when 'Pwer cntrl' is selected. Fr pwer cntrl the characteristic is always linear Settings Delta-T- Manager This functin can be used in rder t prevent an increase in the vlumetric flw when levels fail t reach a set supply/return differential temperature. The valve will nt be pened further in such cases, even with an increasing cntrl signal Limitatin functin -: Delta-T limitatin switched ff Delta-T- Manager: Simple Delta-T limitatin switched n dt Limiting value: N increase in the vlumetric flw when levels fall belw this setting value Delta-T-Manager-Scaling: Advanced Delta-T limitatin switched n dt Limiting value: N increase in the vlumetric flw when levels fall belw a (dynamic) setting value dt Flw saturatin value: Crrespnding flw rate when achieving Delta-T The limitatin functin mnitrs the differential temperature nly when the flw rate is 30% f Vmax - In the range belw 30% Vmax t lw differential temperatures are nt crrected - This perating behavir ensures the crrect start-up f the system after a dwntime 10 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

11 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Nte Settings Maximum and limitatin Maximum flw rate Vmax This value is t be set n the basis f the design data f the cnsumer The definitin f the values Vnm and Vmax is prvided in the Appendix t this dcument. Input as abslute value in the selected unit Minimum flw Vmin In rder t ensure a minimum flw at a request f 0V, it is pssible t enter a Vmin The input is made as an abslute value in the selected unit The bx must be selected actively This minimum flw becmes effective with a minimum demand f the cntrl signal. This is depending n the analgue setting 0V, 0.5V, 2V r via Bus 0% Settings Cnfiguratin pwer Maximum pwer Pmax Is shwn when cntrl functin 'Pwer' is selected This value is t be set n the basis f the design data f the cnsumer Input as abslute value in the selected unit Settings - settings Imprt/Exprt Imprt and exprt the settings, in case several Energy Valves are perated with the same cnfiguratin settings This functin can nly be used with the same nminal size It is nly pssible t adpt all settings f an Energy Valve f the same nminal size. Settings - cmmissining reprt In a cmmissining reprt, all settings and basic data f the Energy valve are shwn clearly and structured. It can be saved as a pdf file T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 11 / 19

12 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings - Date & Time Pssible settings: Date, Time and Time Zne Brwser: Date and time f the cnnected PC-Brwser Device: Date and time which is set n the Energy Valve Update device time: Clicking n "Update device time" causes the Date and Time settings f the attached PC t be adpted n the Energy Valve. NTP Server: As an ptin, time and date can be btained frm a Time Server. When using several Energy Valve it is pssible t define ne Energy Valve as the Time- Master. Fr this purpse, the IP address f the Time-Master must be entered at all ther Energy Valves. 12 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

13 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings - IP IP settings This settings are t be set n the basis f the instructin f the netwrk administratr Static IP/Zercnf: With this setting, the pssibility is given t assign a pre-defined IP-address t the Energy Valve, as well t assign the subnet mask and gateway t it. This methd can be used, if the netwrk administratr is managing the netwrk addresses withut a DHCP server. DHCP/Zercnf: With this setting it is pssible, t assign autmatically an IPaddress t the Energy Valve. If a DHCP Server is available in the netwrk, the Energy Valve is able t receive an IP-address frm it. If there is n DHCP Server in the netwrk, the Energy Valve is able, via Zercnfig, t calculate an IP-address based n the ZerCnfig specificatin. Settings - User Settings fr the user management Users can be added, mdified, r deleted.. Under "Edit selected web user" the respective passwrd can be changed Nte: Only users with a lwer r equivalent authrizatin can be edited T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 13 / 19

14 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings - BACnet/MP/Mdbus Selectin f the cmmunicatin prtcl BACnet IP BACnet MS/TP MP Mdbus TCP Mdbus RTU Nne (nly cnventinal cntrl) Perfrm all relevant settings in accrdance with the specificatins f the nsite equipment. 14 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

15 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings Clud Settings fr the Belim Clud access Clud cnnectin status: Here yu can see whether the cnnectin t the Belim Clud is established r nt. Clud Server: The address f the cnnected hst server Datalg Service: Enables data transfer between the Energy Valve and the Belim Clud Task service: Enables autmatic updating f the flw f the Energy Valve and Delta-T values thrugh the Belim Clud. Update mde: Allws the sftware t be updated by the Belim Clud Disabled: N updates Device cntrlled: Updates are displayed n the web server, n installatin. Clud cntrlled manual: Updates are displayed n the Belim Clud, n installatin required Clud cntrlled aut: Updates are installed autmatically Current wner: The persn wh wns the device. This is typically the name f the user wh has cnfigured the Belim Clud settings and matches the address specified during initial installatin. Refresh current wner: Simple refresh buttn t explicitly request the Belim Clud t infrm Belim f the current wner. New wner: Used when a transfer is started frm a current wner (r n wner) t a new wner. T d this, press the "Transfer device" buttn after entering a new wner.clud cnnectin status: It is shwn here whether the cnnectin t the Belim Clud is established r nt. Cnnectin status: Executes a rutine that helps trublesht the cnnectin t the Belim clud. The fllwing three steps are perfrmed. Checking the cnnectin t the next gateway Checking the Internet cnnectin Checking the cnnectin t the Belim Clud T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 15 / 19

16 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Settings - Maintenance This functin can nly be used with the same nminal size Cnfiguratin Imprt Exprt Update The settings which are selected during cmmissining can be saved here as a file n the cmputer (Exprt cnfiguratin) If a larger number f Belim Energy Valve need t be installed with the same settings, these settings can be exprted nce t be imprted and applied t the ther valve (Brwse / Imprt Cnfiguratin). Only be used with the same nminal size. It is pssible t uplad a sftware update directly and apply it n the Belim Energy Valve Misc Rebt: After pressing this field, the device restarts. The previusly made settings will be maintained Factry reset: The device can be reset t the factry default settings. The steps are as fllws: 1. Press the "Factry reset" buttn and cnfirm with "k". Press the gear disengagement buttn n the actuatr. After that the actuatr starts t set all settings back t default cnditin. All stred data will be lst. Status Health state Displays the current errr messages and the errr histry Current status messages are displayed The errr histry can be reset with the apprpriate authrizatin 16 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

17 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Status - Versins Infrmatin Display f the current sftware and hardware versin Nte Please cmmunicate the infrmatin n this page t yur lcal Belim representative in the event f malfunctin. Data - Data lgging Dwnlad f the csv files stred in the Energy Valve Shrt Term Strage: One file is available per day fr the last 31 days. A measurement series is stred every 30 secnds. Lng Term Strage: One file is available per mnth fr the last 13 mnths. A measurement series is stred every 2 hurs. The files n the actuatr can be deleted by users with the respective authrisatin. T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 17 / 19

18 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Data Live Trend & KPI The LiveTrend functin visualizes the system values. The displayed values can be selected in the lwer area The zming functin can be used t limit the time perid The visualizatin f the plant data allws a simple and fast verview f the system In this view the stred data f the last 8 days are autmatically read in fr the display The 'Read mre data' buttn reads in all the data stred in the actuatr The Delta-T values can be determined using the "cil characteristic" buttn Display f recrded energy cnsumptin as well as cumulative water flw: 18 / 19 T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes

19 Characterised cntrl valve (CCV) with adjustable flw rate and sensr-perated flw cntrl, and pwer and energy-mnitring Attachment Definitin f Vnm Is the maximum pssible flw rate. Vnm represents the as-delivered cnditin. Definitin f Vmax Is the maximum flw rate which has been set with the greatest cntrl signal, e.g. 10V /100% Definitin f Pnm Pnm is the maximum cntrllable pwer utput Qnm at the heat exchanger. Definitin f Pmax Pmax ist the maximum pwer utput Qmax which has been set with the greatest cntrl signal, e.g. 10V / 100% Fr cntrl mde 'Pwer'. T5-Webserver EV..R+BAC / P6...W..EV-BAC en v Subject t changes 19 / 19