Software manual. GoPal Navigator Version 5

Size: px
Start display at page:

Download "Software manual. GoPal Navigator Version 5"

Transcription

1 Sftware manual GPal Navigatr Versin 5

2 GPal Navigatr Versin 5 Cntents CHAPTER 1: INTRODUCTION... 1 Greeting...1 Cntents f CD/DVD...1 System requirements...3 Cnventins in this manual...3 Tips and warnings...4 Imprtant infrmatin...4 Trademarks...5 Cpyright and Warranty...5 CHAPTER 2: BASICS OF OPERATION... 6 Operatin in the menu view...6 Operatin in the map view...8 CHAPTER 3: OPERATING THE GOPAL NAVIGATION SOFTWARE... 9 Manually entering the address...10 Entering the cuntry...10 Entering the pstcde r place name...10 Entering the street name...11 Entering the huse number...11 Entering ther destinatins...13 Last lcatins...13 Pints f interest...13 Favurites...15 Crdinates...16 Destinatin frm map...17 Starting rute calculatin...18 Rute manager...19 Rute planning...19 Rute infrmatin...21 Avid rute...22 Rute simulatin...23 Starting and displaying navigatin...24 Other views...26 Cmpass display...26 Arrw view...27 i

3 Sftware manual Trip inf...27 CHAPTER 4: ADJUSTING THE SETTINGS Specific settings fr the navigatin sftware...28 Adjusting the rute ptins...29 Adjusting the Display...31 Adjusting the language settings...33 Adjusting the Prgram settings...34 Adjusting the device settings...36 Adjusting the special functins...39 Settings assistant...40 Adjusting the Quick menu settings...40 CHAPTER 5: MANUAL INSTALLATION AND START-UP Initial peratin...42 Reinstallatin and updating the sftware...43 Transferring the map material and the POI data t the memry card...44 Transferring data t the internal memry f the navigatin device...44 CHAPTER 6: INSTALLATION AND START-UP USING THE GOPAL ASSISTANT Installing the GPal Assistant sftware...46 User interface f the GPal Assistant...47 Setting the user language...49 Manual actins fr data exchange...49 Actins using the Cntent Imprt Wizard...51 Management f GPS Tracks...51 Functins fr device management...52 Changing the device name...53 Frmatting the external memry card...53 Shpping in the GPal shp prtal...54 ii

4 GPal Navigatr 5 Chapter 1: Intrductin Greeting Welcme and thank yu fr chsing ur mbile navigatin system. While the instructins included with the device utline the basic peratin f yur navigatin device and additinal applicatins (MP3 Player, Picture Viewer etc.), this manual will cver the fllwing tpics: Operating the navigatin sftware Adjusting the settings Installing the sftware and map material Operatin using the vice cmmand functin (if available fr yur device) Als, yur navigatin system s help functin cntains infrmatin abut imprtant perating steps and functins. Yur navigatin device sftware is cnstantly underging develpment and can be kept current using updates that are either free r have an assciated charge. The infrmatin cntained in this manual refers exclusively t the scpe f functins at the time yur navigatin system was delivered. In the event the sftware and/r hardware was subsequently changed and/r updated, the infrmatin printed here may vary frm actual perating steps. In this case, please cnsult the supprt sectin f the Medin website ( fr the current versin f this manual, which will dcument any changes in peratin. Please nte that the manufacturer can accept n respnsibility fr lss r damage as a result f infrmatin r ptentially incrrect infrmatin cntained in this manual. Cntents f CD/DVD The CD/DVD included cntains all f the sftware packs necessary t perate yur navigatin system as well as installatin files fr additinal applicatins which must either be installed n the memry f yur navigatin device r n yur Windws PC. As sn as yu insert the CD/DVD int the drive n yur PC, a Setup Assistant autmatically appears t help yu with installatin: Simply fllw the instructins n the screen t autmatically install the selected data. If the installatin assistant n the CD/DVD des nt start autmatically, yu can als install the necessary data manually. The fllwing infrmatin indicates which cmpnents are cntained n the CD/DVD and which directry n the external memry card r n the flash memry f yur navigatin device t save them t in rder t ensure smth peratin. 1

5 Intrductin Element Descriptin Target flder ActiveSync Adbe This flder cntains the installatin data fr the synchrnisatin sftware Micrsft ActiveSync. This sftware synchrnises yur navigatin device with a Windws PC. This flder cntains the installatin data fr Adbe Acrbat Reader. This sftware enables yu t pen the digital PDF versin f this manual n a Windws PC. APD This flder cntains data fr the GPal Assistant. Assistant Installatin License Agreements Manuals Map Regins AUTORUN readme.txt Setup Assistant This flder cntains the installatin data fr the GPal Assistant. This flder cntains the installatin data fr yur navigatin sftware. This flder cntains the license infrmatin fr using varius services. This flder cntains the PDF versins f this manual in the respective language. This flder cntains the map data yur navigatin system needs fr planning rutes. This setup infrmatin/applicatin ensures that the Setup Assistant, which helps yu when installing the sftware cmpnents, is autmatically started nce the CD/DVD has been inserted. This text file cntains imprtant infrmatin abut the cntents f this CD/DVD and abut the installatin f varius applicatins n the CD/DVD in the relevant language. Once the CD/DVD has been inserted, this applicatin will start autmatically and will help yu install the sftware cmpnents. This prgram must be installed t the Prgram Files directry n yur PC (manually r using the Setup Assistant). This prgram must be installed t the Prgram Files directry n yur PC (manually r using the Setup Assistant). This data is required nly when installing the GPal Assistant n yur PC and des nt have t be manually cpied. This data is required nly when installing the GPal Assistant n yur PC and des nt have t be manually cpied. These files must be installed (manually r using the GPal Assistant) in the directry My Flash Disk n the external memry card r in the My Flash Disk > INSTALL flder f yur navigatin system. These files d nt have t be cpied. These files can be installed n yur PC (manually r using the Setup Assistant) t the directry Prgrams>Medin GPal Assistant>Manuals). These files must be installed (manually r using the GPal Assistant) t the MapRegins directry n the external memry card r in the fldermy Flash Disk f yur navigatin device. This file des nt need t be cpied. This file des nt need t be cpied. This file des nt need t be cpied. Depending n the versin and features f yur navigatin system, it is pssible that sme f the flders and files mentined abve are nt cntained n this CD/DVD r that the CD/DVD cntains extra data. Fr mre infrmatin abut the data saved n the CD/DVD included, see the readme file n the CD/DVD. At the time f delivery varius cmpnents, including the perating system and the navigatin sftware, have already been pre-installed n yur navigatin device and/r the memry card included: That means that yu can use yur navigatin system straightaway, withut having t install anything else. 2

6 Intrductin We d, hwever, recmmend that yu install additinal applicatins like GPal Assistant r Adbe Acrbat Reader t be able t take advantage f the crrespnding functins. In additin, it may be necessary, due t a malfunctin, fr yu t reinstall varius sftware cmpnents fr yur navigatin system after the fact. This prcedure is described in Chapter 5: Manual installatin and start-up and Chapter 6: Installatin and start-up using the GPal Assistant. System requirements Yur mbile navigatin system can be cnnected t a cnventinal Windws persnal cmputer t install (after the fact) applicatin data such as the navigatin sftware, additinal map material etc.. Yur PC must meet the fllwing system requirements fr smth cmmunicatin. Supprted perating systems Windws 2000 frm SP4, Windws XP & Vista TM Hardware specificatins f the current cmputer generatin, minimum 128 RAM, min. ne available USB 1.1 prt Card-Reader fr SD/MMC media recmmended Necessary additinal sftware: Micrsft ActiveSync (nly Windws 2000/XP) fr peratin as mbile device with yur PC, GPal Assistant fr autmatic data transfer between navigatin device and PC (as needed) Tip If yu are wrking with the Micrsft Windws Vista TM perating system, yu d nt need the ActiveSync cmmunicatin sftware. The system files required fr the data transfer are already integrated int yur Vista TM perating system. Please cnnect yur device t yur PC using the USB cable supplied: Once yur navigatin device has been detected as a new device, the required drivers will be installed autmatically. After it has been installed successfully, yur new device is shwn under Remvable Devices n the Windws Explrer screen. If yu have saved additinal data t yur navigatin device, ensure that there is sufficient capacity available when transferring the data. If there is nt enugh space, remve unneeded files. If yur PC meets these requirements, yu can cnnect yur navigatin device t an available USB prt n yur PC using the USB cable supplied t exchange data. Cnventins in this manual The peratin f yur navigatin system is directly based n the user guide in applicatin sftware fr a PC. That means that entries in the sftware can be visually displayed n the screen and executed frm there. The peratin itself is different: While functins n yur PC are perfrmed by clicking the muse, yu can perate yur navigatin device either by using the stylus supplied r by direct manual entry n the tuch-sensitive screen f yur navigatin device. S, the fllwing applies fr the fllwing descriptins: Fr entries that yu perfrm with the muse n yur PC, we use the term "click" Fr entries using the stylus r a finger n the tuchscreen f yur navigatin device, we use the term "type/tap". At varius pints in this manual we refer t entries within a sftware applicatin r t a path n yur PC/memry card. In the fllwing descriptins, these references are indicated as fllws: Entries taken frm the sftware (like buttns, menu items r labels fr check bxes) are in bld. Specific functins and prgrams f yur navigatin system (e. g. MP3 Player etc.) r PC (e. g. Windws Explrer etc.) are italicised. Infrmatin abut directries and paths (n the external SD card r n the flash memry f yur navigatin device) are italicised. The infrmatin in this manual dcuments the peratin f the navigatin sftware, explains the 3

7 Intrductin graphic display n the screen f yur navigatin device and lists the available selectin ptins fr individual functins. S, the fllwing applies fr the fllwing descriptins: Descriptins pertaining t executing a functin are listed numerically, thus defining the rder f the individual steps. Descriptins referring t varius elements in a sftware windw r similar, are als listed numerically, but in clur. Descriptins listing varius equivalent ptins (as in this case), are indicated with bullet pints. Tips and warnings At varius places in this manual we give yu practical tips r refer t circumstances which culd disrupt the smth running f yur navigatin system. These sectins are indicated as fllws in the fllwing descriptins. Tip This symbl draws yur attentin t functins and features that speed up yur wrk flw and facilitate the peratin f yur navigatin system. Nte This symbl indicates functins and features that are essential t the peratin f yur navigatin system. Please bey all infrmatin t avid malfunctins thrugh perating errr r incrrect entries. Imprtant infrmatin The fllwing cntains imprtant infrmatin regarding the peratin f yur navigatin system. This infrmatin is repeated in the frm f cmments and tips at apprpriate places in this manual. Fr safety reasns, entries may nt be made by the driver whilst driving: Please make the necessary entries befre beginning the jurney. If yu need t change yur entries during the jurney, stp yur vehicle at a suitable pint (parking spt etc.). Vehicle windscreens made f Thermglas r metalised windscreens cnsiderably limit the GPS receptin. There is usually a special pening in this metallic cating, behind which the navigatin device can be placed. If that is nt the case, a cmmercially-available GPS antenna must be munted utside the passenger cabin (e. g. n the rf f the vehicle). The instructins fr the navigatin system are recmmendatins nly: Always pay attentin t rad traffic regulatins. Please nte that yur navigatin device must receive a valid GPS signal in rder t calculate the rute frm the current psitin. Please nte that yur navigatin device must be set t the lcal time zne t be able t calculate the crrect time f arrival fr future rute calculatins. Yu can als fllw yur current psitin n the map withut entering a destinatin. If available, the name f the street yu are currently n will be displayed Nte that temprary lcal changes and/r restrictins t rad traffic regulatins (e. g. permitted maximum speed) cannt be accunted fr in the rute planning: Always bey signage and/r lcal traffic ruting. Please nte that the map material is current as f the time f delivery. Hwever, the manufacturer cannt guarantee the infrmatin t be cmpletely binding r that it crrespnds t the rad layut and/r signage. 4

8 Intrductin Trademarks All trademarks appearing in this manual and any brands r trademarks prtected by third parties are subject withut restrictin t the cnditins f the applicable trademark law and the right f wnership f the respective registered wners. All trademarks, trade names r cmpany names used here are r can be trademarks r registered trademarks f their respective wners. All rights nt expressly granted here are reserved. The absence f an explicit name f the trademarks used in this manual des nt mean that a name is free and clear f third party rights. Windws, Windws XP, Windws 2000, Windws Vista TM and ActiveSync are trademarks f the Micrsft Crpratin. Acrbat and Acrbat Reader are trademarks f Adbe Systems Incrprated. Cpyright and Warranty Cpyright 2009 Versin 5 All rights reserved. Any infrmatin in this manual may be changed withut ntice and in n way represents any bligatin n the side f the manufacturer. The manufacturer accepts n respnsibility fr lss r damage as a result f infrmatin r ptentially incrrect infrmatin cntained in this manual. We are grateful fr any infrmatin regarding errrs and fr suggestins fr imprvement in rder t ffer yu even mre efficient prducts in the future. This manual may nt be reprduced, in whle r in part fr any purpse and it may nt be stred t an electrnic medium r reprduced in any ther frm including electrically, ptically, chemically, by phtcpy r audi recrding withut the express, written cnsent f the manufacturer. 5

9 GPal Navigatr 5 Chapter 2: Basics f peratin Yur navigatin device is ready t perate immediately: The navigatin sftware and the map material included have been pre-installed n yur device. Hwever, in rder t enter yur wn navigatin destinatins and user-specific settings, yu must be familiar with the basic perating cncept f yur navigatin system, which will be presented t yu n the fllwing pages. If yu are already familiar with the perating cncept, please g directly t Chapter 3: Operating the GPal navigatin sftware. Yur navigatin system features tw perating mdes: "menu view" and "map view". Operatin in the menu view All f the sftware functins are rganised in hierarchical menus which are called up by pressing the buttns n the tuchscreen f yur navigatin device. Each buttn pens up the level underneath, which then prvides access t ther ptins relevant t this menu r functin. If a buttn has nt been assigned t anther menu level, the functin is perfrmed directly. Fr example: Using the buttn......gives yu acces t the sub-menus/buttns... Within the menu levels yu can use the available buttns t pen up r exit ther sub-menus t reach the apprpriate main menu. Navigatin within the menus is as fllws: T pen the desired menu and display the sub-menus cntained within, tap the apprpriate buttn. T clse the sub-menu which is currently pen and g t the apprpriate main menu, tap the buttn. T g t anther page within a menu level, tap the buttn. Varius screens require yu t select frm the available ptins in a list. T shw hidden entries in the list, yu can mve the display area up r dwn using the r buttn. The current psitin in the list is displayed n the infrmatin bar between these buttns. 6

10 Basics f peratin On varius screens yu can lwer r raise a pre-set value. T lwer r raise the currently displayed value, press the buttns r. The current value is displayed n the value scale between the tw buttns. On varius screens yu must chse whether a functin r step is t be perfrmed r cancelled. T perfrm a functin r step, tap the T cancel a functin r step, tap the buttn. buttn. 7

11 Basics f peratin Operatin in the map view Buttns and status are displayed in map view. Buttns This buttn pens the settings windw Vlume: Adjust the vlume f the vice, buttn click and MP3 Player utput here. This buttn is nly available if yur navigatin system is equipped with a Bluetth handsfree device (see device manual). In split-screen mde, yu may chse whether the arrw view is displayed r pints f interest are available fr direct selectin. This buttn takes yu frm the map view back t the navigatin menu. This buttn switches the map view between the ptins Map in directin f travel, Nrth up and 3D map. These buttns enlarge r make the displayed map sectins smaller. If yu tap ne f the zm buttns, yu can use the buttn at any time t switch t Aut Zm mde. This buttn pens the Quick menu described in the Adjusting the Quick menu settings sectin. Status displays The distance t the next maneuvre is displayed here. The street yu are currently n is displayed here. The TMC receptin quality is displayed here. The charge status is displayed here. The GPS receptin quality is displayed here. The average speed is displayed here. The current speed is displayed here. The estimated time f arrival at the destinatin is displayed here. Yur current psitin within the map sectin is displayed here. The remaining travel time t the destinatin is displayed here. The distance t the destinatin is displayed here. The current scale n the map sectin is displayed here. 8

12 GPal Navigatr 5 Chapter 3: Operating the GPal navigatin sftware This sectin cvers the basic set-up and peratin f yur navigatin sftware. The fllwing descriptin assumes that yu are familiar with the basic peratin f yur navigatin system and that yu are wrking with the default settings as delivered. After start-up, yur navigatin system launches the settings assistant that guides yu thrugh all the imprtant settings step by step. Yu can als accept the default settings, which yu can change at any time in the Settings menu t meet yur persnal needs. If yu have already adjusted certain settings t meet yur persnal needs, the descriptin may differ frm the cntent displayed n yur system. Tip This manual nly describes the peratin f yur navigatin sftware. Infrmatin abut perating the ther functins n yur navigatin system can be fund in the device manual. After selecting the Navigatin menu, the fllwing menus and functins are available fr selectin and fr calculating the desired rute(s): Enter a new destinatin here. Here yu can select the destinatin frm the last twns entered, pint f interest categries r yur favurites. Yu can als define a destinatin using its crdinates r directly n the map. Here yu can shw r edit varius infrmatin abut the current rute r simulate it n the device. Start the rute calculatin fr the destinatin entered here. Tip If yu have already entered ne r mre destinatins int yur navigatin device, tw buttns with the last entered destinatins appear in the area abve the menu keys. Using these buttns yu can start the navigatin t this destinatin directly. 9

13 Manually entering the address After starting the navigatin device, yu can enter a destinatin t calculate a rute frm yur current lcatin t the desired psitin. With the basic settings, the rute is calculated based n the default settings fr the rute ptins (see Adjusting the rute ptins). T enter destinatin infrmatin manually, tap the Enter address buttn in the navigatin menu. The fllwing screen then appears: Tip Fr safety reasns, entries may nt be made by the driver whilst driving: Please make the necessary entries befre beginning the jurney. Entering the cuntry In this menu, the preset cuntry always crrespnds t the language selected during installatin. If yu are planning n navigating t a freign cuntry, hwever, yu can als select a different cuntry. The nly prerequisite is that the relevant map material is installed n yur navigatin system. Prceed as fllws t select anther cuntry: 1. Tap the flag symbl in the upper-left crner f the screen r tap the Cuntry buttn n the lwer edge f the screen. A menu list f all f the cuntries whse map material is installed n the navigatin system then pens. 2. Tap n the desired cuntry entry: The selectin is accepted and the lcatin entry screen appears again. Nte With the help f the GPal Assistant yu can select which map material is saved n yur navigatin device. If necessary, yu can install mre map material n the external memry card r t the flash memry f yur navigatin device at any time. Fr further infrmatin, see Manual actins fr data exchange. Entering the pstcde r place name The destinatin can be selected either by entering the pstcde r the place name: The entry f the pstcde is autmatically transferred t the place and vice versa. Prceed as fllws t enter the destinatin using its name r its pstcde: Enter the desired name using the nscreen alphanumerical keys. 10

14 Tap n the buttn t shw the numerical keys and enter the pstcde. When entering the twn r the pstcde, the keybard is autmatically adapted and nly the buttns permitted fr entering the next character are available: All buttns that are nt permitted are greyed ut and cannt be tapped. Yu can und any number r character entry with the buttn. After entering the first character, three buttns appear in the area between the name field n the upper edge and the keybard: The first tw buttns prvide pssible destinatins fr selectin in accrdance with the entries made s far. This preselectin is readjusted after each entry. As sn as ne f the preselectins crrespnds t yur desired destinatin, yu can select it directly by tapping the relevant buttn. Yu can use the third buttn Mre hits t pen a list f all f the available preselectin destinatins in a separate windw. Fr better rientatin, yu are shwn the available preselectin destinatins n an verview map. Using the Hide map buttn, the map display clses. Yu can pen it again with the Shw map buttn. Brwse thrugh the list using the and buttns and tap the desired entry: The selectin is accepted. If yu d nt want t make a selectin r if yu want t refine yur entry, return t the character entry screen using the buttn. After selecting the destinatin, the screen t enter the street name autmatically pps up. Entering the street name On this screen yu can either enter a specific street name, have the navigatin g t the twn centre r select a specific pint f interest. Prceed as fllws t enter the street name: 1. Type the first character n the screen keybard: The keybard is autmatically adjusted and displays nly thse buttns/ characters with which a street name in the selected destinatin begins. All ther buttns with which n street name begins in this place are greyed ut and cannt be used. 2. Cntinue entering until the desired street name has been entered. As sn as the desired street name appears n ne f the tw buttns fr preselectin, tap it t select the street directly. Alternatively, yu can use the third buttn, All hits, t pen a list f all available preselectin destinatins in a separate windw. Brwse thrugh the list using the and buttns and tap the desired entry: The selectin is accepted. If yu d nt want t make a selectin, return t the character entry screen with the buttn. After selecting the street, the screen t enter the huse number autmatically pps up. Instead f entering the street name manually, the tw buttns between the name field n the tp edge and the keybard prvide the fllwing ptins: The Centre 'destinatin' buttn starts navigatin twards the destinatin defined in the map material as the centre pint fr this twn. This twn centre pint is displayed n an verview map n the Detailed infrmatin screen. Here yu can stre the destinatin as a favurite, shw the rute ptins, add anther destinatin r start navigatin. The fllwing pages cntain mre infrmatin n this subject. The Pints f interest buttn pens a list fr yu t select a pint f interest at the destinatin selected. The fllwing pages cntain mre infrmatin n this subject. Entering the huse number The screen t enter the huse number pens autmatically after yu have selected the street name at the destinatin using ne f the buttns fr preselectin r the list view (Mre hits). The fl- 11

15 lwing ptins are nw available n this screen: Enter the huse number manually: as sn as the desired huse number appears n ne f the tw buttns fr preselectin, select it directly. Alternatively, yu can use the third buttn All hits t pen a list f all f the available huse numbers in a separate windw. Brwse thrugh the list using the and buttns and tap the desired entry: The selectin is accepted. If yu d nt want t make a selectin, return t the character entry screen with the buttn. The Middle f the rad buttn guides the navigatin t the destinatin defined in the map material as the mid-pint fr this street. The Crssrads buttn allws yu t enter the name f a side street that intersects the street riginally entered: The destinatin is then assigned t these crssrads. Type the name f the side street n the keybard: As sn as the desired street name appears n ne f the tw buttns fr preselectin, tap it t select the street directly. Alternatively, yu can use the third buttn All hits t pen a list f all f the available huse numbers in a separate windw. Brwse the list using the buttns and and tap the desired entry: The selectin is accepted and the selectin list clses. If yu d nt want t make a selectin, return t the character entry screen with the buttn. After yu have made yur selectin, destinatin input is cmplete: The destinatin is displayed n the Detailed infrmatin screen n an verview map and indicated as an address. On this screen yu can stre this destinatin as a favurite, shw the rute ptins, add anther destinatin r start navigatin. The fllwing pages cntain mre infrmatin n this subject. 12

16 Entering ther destinatins As an alternative t entering the twn/street/huse number manually, yu can als enter r select yur destinatin using ther criteria. Tap the Search fr ther destinatin buttn in the navigatin menu t d s. Last lcatins Yur navigatin device saves the last destinatins entered in the Last lcatins list, which is accessed by the buttn f the same name. This lets yu re-select these destinatins withut having t enter the destinatin infrmatin. Brwse thrugh the respective list using the and buttns and tap the desired entry: the destinatin is displayed n an verview map n the Detailed infrmatin screen. This screen allws yu t add anther destinatin, pen and change the rute ptins fr navigatin r start navigatin. The fllwing pages cntain mre infrmatin n this subject. Tip Yu can delete destinatins yu n lnger need frm the list using the relevant buttn. If yu want t delete all last lcatins, tap the Delete all buttn n the lwer edge f the screen. Pints f interest The Pints f interest buttn n the Enter new destinatin menu lets yu use special pints f interest, the POI data (pints f interest) saved t the map material, fr destinatin calculatin. Using Other ptins in this menu, yu can then determine in which categry the desired pint f interest shuld be searched fr. Nte The inclusin f POI data in delivery depends n the type f device as well as n the versin f yur navigatin system: Fr this reasn there may nly be selected categries available in yur navigatin system. Pint f interest categries The fllwing ptins are available in the selectin list fr pint f interest categries: The All pints f interest buttn pens a windw fr yu t select all available pints f interest. Tap the Display all pints f interest buttn t shw all pints f interest in a list. Alternatively, yu can enter the name r categry (e. g. HOTEL) f the desired pint f interest using the alphanumeric keybard. Nw tap the Display selectin buttn t shw a list f all pints f interest meeting the criteria entered. Alternatively, yu can select a particular pint f interest categry via the list (e. g. AUTO & 13

17 TRAFFIC). After selecting the categry nscreen, the navigatin sftware pens an additinal list within this categry that lets yu narrw yur initial selectin (e. g. AUTO & TRAFFIC > airprts, harburs, train statins, car rental, etc.). Brwse thrugh the list using the and buttns and tap the desired entry: The selectin is accepted. The Display all pints f interest buttn shws a list f all available pints f interest in this categry. Yu can als manually enter the name f the pint f interest yu are lking fr using the keybard. Fllwing the first entry, use the Display selectin entry t pen a list cntaining all f the pints f interest frm the selected categry, which crrespnd t yur entry thus far. Selecting Pints f interest Prceed as fllws t select a pint f interest: 1. Tap the Pints f interest buttn in the Enter new destinatin menu. A menu list cntaining all f the POI categries available t yur navigatin system then appears. 2. Brwse thrugh the list using the and buttns and tap the desired categry: The Where d yu want t search? screen then appears. 3. Use the buttns t chse frm the fllwing ptins: Tap n the At a certain place buttn, t enter a new destinatin. This prcess is described in the Manually entering the address sectin. Tap the buttn Nearby t select a POI near yur current psitin. Tap the buttn Alng the Rute t shw a list cntaining all destinatins in direct prximity t the cntinued curse f the current rute. Tap the buttn At destinatin t select a POI at the currently selected destinatin. 4. Depending n the ptin selected, yu can pen a list cntaining all pints f interest that crrespnd t the criteria selected using the Display all 'pints f interest categries' buttn. Brwse thrugh the list using the and buttns and tap the desired entry: The selectin is accepted. If yu d nt want t make a selectin, return t the character entry screen with the buttn. The desired special destinatin is nw displayed n the Detailed infrmatin screen n an verview map tgether with the cmplete address and telephne number (if stred). This screen allws yu t add anther destinatin, pen and change the rute ptins fr navigatin, call the destinatin r start navigatin. Tip Yu can als select pints f interest directly when entering a new destinatin. In this case, the pint f interest selectin refers nly t the destinatin entered. Weitere Infrmatinen dazu erhalten Sie im Abschnitt Manually entering the address sectin. 14

18 Favurites Yu can save frequent destinatins t the memry f yur navigatin device using the Favurites buttn. Later n, yu can call up these favurites directly, s manually entering this destinatin is n lnger necessary. Creating a favurite When yu use yur navigatin device fr the first time (r after initialisatin) there are n favurites saved t the device. Prceed as fllws t create a new favurite: 1. Tap the Favurites buttn in the Neues Ziel eingeben menu. The Favurites menu screen appears. 2. Tuch the New favurite buttn n the lwer edge f the screen: The New favurite screen is then pened, where yu can select frm the fllwing ptins: If yu have already entered several destinatins, yu can select the last destinatin entered directly via the buttn at the tp. If ther recent destinatins are available fr selectin, pen a list f these destinatins using the Last lcatins buttn. If yu tap n ne f the destinatins, the selected destinatin is shwn n the Detailed infrmatin screen. Clse the entry n the Detailed infrmatin screen using the buttn. Tap the Enter new destinatin buttn t enter the destinatin/favurite manually using the input menus fr Cuntry, Twn/Pstcde, Street and Huse Number. This prcess is described in the Manually entering the address sectin. Tap the buttn Pints f interest t select a destinatin/favurite frm amngst the desired pint f interest categry. This prcess is described in the Pints f interest sectin. Tap the Current psitin buttn, t stre yur current lcatin as a favurite. 3. After selectin/entry the screen fr naming favurites appears. 4. Enter the name fr the favurites using the nscreen keybard and clse the input field with the buttn. Calling up a favurite After yu have created ne r mre favurites, yu can call it/them up directly frm the Favurites menu. Prceed as fllws: 1. Tap the buttn Favurites. A selectin list f the favurites yu have created appears. 2. Brwse thrugh the respective list using the and buttns and tap the desired entry: the destinatin is displayed n an verview map n the Detailed infrmatin screen. 3. Clse the input field using the buttn: Rute calculatin then starts fr this destinatin. Deleting all favurites If yu want t delete all favurites currently saved n yur navigatin device, tap the Delete all favurites buttn n the lwer edge f the screen: all entries in the favurites list are then deleted. Editing favurites Yu can edit individual favurites in the list in the Favurites menu as needed. Rename the favurite, assign it a symbl, save it as the hme address r delete the entry. T edit a favurite, tap n the respective then pens. buttn in the list view. The Edit favurites screen 15

19 Prceed as fllws t rename a selected favurite: 1. Tap the buttn Name. The screen t enter names fr the favurites appears again. 2. Delete the current name as needed using the buttn. 3. Enter the name fr the favurites using the nscreen keybard and clse the input field with the buttn. The changed favurite name is nw accepted fr display in the Edit favurite screen and the favurites list. Prceed as fllws t assign the selected favurite a new symbl: 1. Tap the buttn Symbl. The Select symbl screen then appears. 2. Brwse the list using the buttns and and tap the desired entry: The selectin is accepted and the selectin list clses. The changed symbl is nw accepted fr display in the Edit favurite screen and the favurites list. Using the As hme address buttn n the lwer edge, yu can save the selected favurite as hme address : in future yu can directly select the hme address as the destinatin via the first preselectin buttn in the navigatin menu. This way, yu can select an ften-used destinatin (such as yur hme r wrk address) directly withut having t enter anther destinatin. Tap n the As hme address buttn n the lwer edge f the screen. The entry is then assigned the symbl. This entry is nw used as the first preselectin buttn in the navigatin menu and is available as the first ptin in the Favurites menu. Nte If defined, the hme address is always available via the first preselectin buttn in the navigatin menu, s it is nt available in the Last lcatins selectin list, which is pened using the buttn f the same name in the navigatin menu. The hme address is always assigned t yur favurites and is therefre always the first ptin in the Favurites menu. If yu tuch the Delete all buttn in the Favurites menu, the hme address is als deleted and will have t be re-entered if necessary. Please be aware: When setting new favurites, yu cannt save these under the same name as the hme address. In additin, the Edit favurites menu gives yu the ptin f deleting the selected favurite. Tap n the Delete buttn n the lwer edge f the screen. The entry is deleted frm the list. Tip Please nte: Deleted favurites cannt be restred. Only use the delete functin when yu n lnger need the favurites. Otherwise yu will have t enter the favurites again. Crdinates Yu can enter the destinatin using its lngitude and latitude crdinates in the apprpriate submenu. Prceed as fllws t enter the crdinates manually: 1. Using the numerical keybard, enter the desired latitude in degrees using decimals: t divide the numbers enter a cmma (fr example: 49,36 is interpreted as a latitude f ). Clse the input field using the buttn: The next screen will ask yu t enter the lngitude including decimals. 16

20 Tip The degree ntatin buttn n the lwer edge f the screen allws yu t alternatively enter the crdinates in degrees: On the apprpriate screen, enter the desired psitin in crrespnding fields fr degrees, arc minutes and arc secnds. Yu can als use the N<>S (fr latitude) r E<>W (fr lngitude) buttn in the upper left crner f the screen t tggle between an equatr r prime meridian pint f reference. 2. Use the numbers n the keybard t enter the desired lngitude: Depending n what yu chse when entering the latitude, it can als be written either in decimals r degrees. Clse the input field using the buttn: Crdinate input is nw cmplete: The destinatin is displayed n the Detailed infrmatin screen n an verview map alng with the latitude and lngitude. This screen allws yu t add anther destinatin, pen and change the rute ptins fr navigatin r start navigatin. The fllwing pages cntain mre infrmatin n this subject. Destinatin frm map In the map view it is pssible t manually enter a destinatin n the map. This way, yu define the destinatin directly withut the destinatin r crdinate entry described in the previus chapters. Prceed as fllws t enter the destinatin in the map view: 1. Tap n the desired psitin within the map sectin displayed. If required, first zm t the desired scale n the map sectin. 2. The psitin yu tapped is indicated n the map with this symbl. On the upper edge f the screen, the navigatin system suggests a destinatin that crrespnds with this psitin. If an unambiguus destinatin (e. g. a pint f interest) can be determined, the address is displayed in the header. If multiple unambiguus destinatins can be determined, the number f suggested destinatins is displayed as is the psitin f the displayed destinatin amng these ptins (fr example: 3/12 means destinatin 3 ut f 12 available destinatins). Brwse thrugh the list cntaining the available destinatins using the and buttns n the lwer edge f the screen. If n unambiguus destinatin can be determined, the crdinates are displayed in the header. 3. Tap n the buttn Detailed infrmatin t display the current destinatin n the Detailed infrmatin screen n an verview map: If address data are stred r available fr this destinatin they are displayed. Using the buttns n the lwer edge f the screen, yu can add the current destinatin as a favurite and start the rute calculatin. 4. Tap n the buttn n the lwer edge f the screen t start rute calculatin fr this destinatin. 17

21 Starting rute calculatin After entering and selecting the destinatin, the Detailed infrmatin screen will appear. Yu will be given the fllwing infrmatin abut yur selected destinatin: The selected destinatin is displayed n an verview map fr quick rientatin. If yu tap n the verview map, the map view is pened. Using the Zm buttns and the cmpass, yu can zm in/ut n yur map sectin as needed and als switch t 2D r 3D view. Use the buttn t return t the detailed infrmatin. The address entered will be displayed next t the verview map. If yu have defined the destinatin using crdinates, these will appear. If a telephne number was saved t this pint f interest and the telephne feature is available n yur navigatin device, yu can call the pint f interest using the Call nw buttn. The fllwing ptins are als available in the fter f this windw: Using the Lcatin as favurite buttn, yu can save the destinatin as a persnal favurite t the memry f yur navigatin device. This prcess is described in the Favurites sectin. Using the Other destinatin buttn, yu can extend navigatin t include ne r mre additinal destinatins. This prcess is described in the Editing the entries in the rute list sectin. Using the Rute ptins buttn, yu can adjust varius parameters fr navigatin. This prcess is described in the Adjusting the rute ptins sectin. Using the buttn, yu start the calculatin fr navigatin. Here yu have ther available ptins that are described in the next sectin. 18

22 Rute manager Using the Rute manager buttn in the Navigatin menu, yu have the ptin t plan and simulate rutes in advance, request current rute infrmatin r redirect navigatin by manually blcking rute sectins. Rute planning Using the Rute planning yu can plan yur rute in advance r change and/r ptimise a rute already planned. In additin, this menu allws yu t save frequently used turs and lad them at a later time. Tip If yu need t change yur entries during the jurney, stp yur vehicle at a suitable pint (parking spt etc.). Entering the start psitin There are n places saved n yur navigatin device when it cmes frm the factry that can be used as a start psitin fr a new rute. Prceed as fllws t create a starting pint fr the rute: 1. Tap n the list entry Last knwn psitin n the menu screen Change rute: The menu New destinatin pens. 2. Enter a new destinatin: this prcess is described in Chapter 3: Operating the GPal navigatin sftware. Clse the entry n the Detailed infrmatin screen using the buttn. The destinatin entered will nw be used as the starting psitin fr the tur and is displayed as the tp entry in the list in the Change rute menu. Adding a destinatin Using the Add destinatin buttn n the lwer edge f the screen, yu can enter mre rute destinatins. Entering an additinal destinatin is identical t entering yur starting psitin (see abve). Once it is entered, the new destinatin is displayed as the next destinatin in the list in the Change rute menu. Repeat this prcess t enter mre destinatins which will then be inserted int the list in the rder they are entered. If yu have created mre than fur destinatins, yu can brwse thrugh the list using the and buttns. When yu tap a destinatin in the list, it is displayed n the Detailed infrmatin screen n an verview map alng with the stred address data r crdinates. Use the buttn t return t the Change rute menu. Editing the entries in the rute list Yu can delete the entries in the rute list at any time as required r change the rder f the entries in the list t alter the curse f the rute. Prceed as fllws t delete an entry frm the list: Tap the buttn fr the respective destinatin: The entry is deleted frm the list. Unless the entry was the final destinatin n the rute, all subsequent destinatins mve ne psitin frward. 19

23 Nte Deleted destinatin entries cannt be restred. If required, yu must enter the destinatin again. Prceed as fllws t edit the rder f the entries in the list and thus als the tur rder: Tap the buttn r fr the respective destinatin: The entry in the list is mved ne psitin up r dwn and the resulting rute is diverted accrdingly. Optimising the rute The Optimise rute buttn allws yu t check the current rute and adjust the navigatin t be as efficient as pssible: In s ding, yur navigatin device assumes that the starting pint and ending pint f yur tur are the same. As a result, the rder f the destinatins is adjusted t calculate the shrtest pssible rute verall. Tip Nte that ptimisatin nly takes place if the rute cmprises mre than tw destinatins, nt including the starting/end pint. In additin, yur navigatin system assumes a direct cnnectin as the crw flies fr ptimisatin. The actual ptimal ruting may deviate frm this theretically ptimised navigatin and is nly a suggestin. Saving and lading a tur If yu frequently need the navigatin fr a given rute, yu can save this rute n yur navigatin system and lad it at a later pint in time. Prceed as fllws t save the current rute planning: 1. Tap the Lad/Save buttn. The Edit rute screen then pens. 2. Tap the Save current rute buttn n the lwer edge f the screen. The screen t enter rute names then appears. 3. Enter the name using the nscreen keybard and clse the input field with the buttn. After it has been entered, the entry fr this rute is displayed in the list n the Lad and save rute screen. Prceed as fllws t lad an entry frm the list at any pint in time: 1. Tap the Lad/Save buttn. The Lad and save rute screen then pens. 2. Tap an entry in the list: A screen with a map display as well as infrmatin abut this tur then appears. 3. T start navigatin fr this tur, tap the buttn. If yu d nt want t make a selectin, return t the Lad and save rute screen with the buttn. If yu n lnger need a saved tur, tap the apprpriate buttn : The entry is deleted frm the list. Changing a planned rute If needed, yu can als change the rute at a later date. Prceed as fllws: 1. Tap the Lad/Save buttn. The Lad and save rute screen then pens. 2. Tap an entry in the list: A screen with a map display as well as infrmatin abut this tur then appears. 3. Use the buttns t chse frm the fllwing ptins: The buttn takes yu back t the Lad and save rutescreen withut any changes. The Edit buttn pens the Rute planning screen again: All f the functins described previusly are available t yu at this pint (Add destinatin, Change rder, Delete desti- 20

24 natins etc.). The Rename buttn pens up the screen fr name input again: Change the name and cnfirm the entry with the buttn. The changed name appears in the list n the Lad and save rute screen. The Delete buttn remves this rute frm yur navigatin system. This prcess cannt be undne. Use the buttn t start navigatin fr this tur. Rute infrmatin In the Rute infrmatin menu, yu have the ptin t call up imprtant infrmatin abut yur planned rute. Directins Once yu have started navigatin fr a rute (new destinatin r saved rute), the Directins buttn is available. The directins tell yu which rads t use t reach yur destinatin. All rute infrmatin, alng with the distance, is shwn in a list n the Directins screen, serving as a preview f the planned maneuvre. If the planned rute cannt be displayed n a single screen, yu can brwse thrugh the list using the and buttns. Brder crssings int ther cuntries are marked fr better rientatin. When yu wish t exit the directins screen, use the rute infrmatin. buttn t return t the selectin menu fr Traffic cnditins This functin enables yu t display current traffic infrmatin received by yur navigatin system in a list and call up specific pieces f infrmatin. Prceed as fllws t cnfigure receptin f traffic infrmatin: 1. Tap the buttn Traffic infrmatin. The Traffic situatin screen then appears. 2. Tap n the Settings buttn in the lwer prtin f the screen: The menu TMC settings is then pened in the Prgram settings f yur navigatin system. 3. Adjust the receptin f the TMC services as needed: This prcess is described in the Adjusting the Prgram settings sectin. Nte The TMC receptin status is displayed using the indicatr in the map view as well as n the Traffic situatin screen. If receptin is disrupted, yur navigatin system is unable t receive traffic reprts. After cnfiguring the TMC statin settings, yu can take advantage f the available traffic infrmatin services. Prceed as fllws t shw current infrmatin abut traffic cnditins: 1. Tap the buttn Traffic infrmatin. The Traffic situatin screen then appears. The apprpriate list then displays the traffic reprts affecting yur rute: These entries are labelled with red traffic signs (e. g. ). The rder f the entries depends n the distance frm yur lcatin. The lwer part f the list als displays results nt n yur rute: These entries are labelled with grey symbls (e. g. ) and are in alphabetical rder. Yu can brwse thrugh the list f traffic reprts using the and buttns. 2. Tap the desired entry in the list t display the traffic reprt in the detailed view: The rute, the rute sectin, the type and length f the traffic disruptin are described in the text f the traffic 21

25 reprt. If the traffic disruptin will influence yur travel time, (traffic jam, stagnant traffic), the estimated lss f travel time is als displayed If n alternate rute can be calculated, the warning symbl n the map disappears but yu can select the traffic disruptin relevant t yur rute frm the list view nce again and then have an alternate rute calculated in the traffic warning view. 3. Tap the Shw lcatinbuttn t display the psitin f the traffic disturbance n the map view: Yu can zm in n the sectin as needed. If yu wuld like t leave the map view, tap the buttn: 4. If the traffic disturbance is lcated n yur current rute, yu can use the Alternative rute buttn t have a detur arund the traffic disturbance calculated: This ptin is nly available if the ptin By Pass: Autmatic is nt active in the rute ptins. Otherwise the alternate rute is calculated autmatically and navigatin is diverted accrdingly. If n alternate rute can be calculated, the warning symbl n the map disappears but yu can select the traffic disruptin relevant t yur rute frm the list view nce again and then have an alternate rute calculated in the traffic warning view. buttn t return t the selectin me- When yu wish t exit the Traffic situatin screen, use the nu fr rute infrmatin. Overview Use the Overview buttn t shw the calculated rute frm the lcatin/starting pint t the destinatin. The current lcatin is indicated with the symbl, the destinatin(s) are labelled with the symbl: If yu have planned several destinatins, they are numbered. The calculated rute between the lcatin/starting pint and the destinatin(s) is shwn in blue. Using the Start navigatin buttn, yu can trigger navigatin frm this windw directly. Current psitin Using the Current psitin Using the Current psitin buttn, yu can shw yur current lcatin n the map view: the symbl marks the current lcatin. Using the Start navigatin buttn, yu can trigger navigatin frm this windw directly. Starting pint Using the Starting pint buttn, yu can shw the starting pint n the map view. The planned rute is displayed in blue and leads ut f the current map sectin. Using the Start navigatin buttn, yu can trigger navigatin frm this windw directly. Destinatin area Use the Destinatin area buttn t shw the next destinatin n the map view. The planned rute is displayed in blue and ges int the current map sectin. Using the Start navigatin buttn, yu can trigger navigatin frm this windw directly. Avid rute Under certain circumstances, traffic disturbances may ccur n the planned rutes which were unknwn at the time the rute was planned and thus were nt taken int accunt during calculatin. In this case, yu can manually blck ff a sectin f the rute t cme after yur current psitin in rder t calculate an alternate rute fr the selected distance and t avid the traffic disturbance in this way. Prceed as fllws t avid a sectin f the rute: 1. Tap the Avid rute buttn: The Length f avided rute screen then pens. 22

26 2. Select the desired distance frm the list: If the desired distance is nt available in the current sectin f list, yu can brwse thrugh the list using the and buttns. Chse frm the fllwing ptins: 100/500 m, 1/2/5/10/15/25 km. 3. Once the distance has been selected, the Start f avided rute screen pens. Here yu can chse at what distance (frm yur current psitin) the rute shuld be avided. In additin t the current psitin (entry: Immediately) the fllwing ptins are available: 100/500 m, 1/2/5/10/15 km Once the length has been selected, yur navigatin system calculates an alternative rute and switches autmatically t the map view. Navigatin is updated and reruted. The symbl in the map view marks the pint frm which the rute is t be avided. The diverted rute is marked red n the map view. At the end f the detur yur navigatin system switches back t the planned rute and cntinues navigatin. Prceed as fllws t remve the blcks n sectins f rads: 1. Tap the Avid rute buttn: The Avid rute screen then pens. 2. Tap the buttn: The current blcks are remved. When yu wish t exit the rute avidance screen, use the menu fr the Rute manager. buttn t return t the selectin Rute simulatin Yu can simulate a planned rute if needed: When yu d this, navigatin is displayed in the map view and it runs thrugh all f the maneuvres: Navigatin takes place in real time based n ne f the speed limits specified fr the respective map sectin. The manœuvres are dcumented visually n the screen as well as via yur navigatin system s vice. The fllwing pssibilities are available during simulatin: Yu can stp the simulatin at any time using the Stp simulatin buttn. The map display with yur current psitin is displayed n the screen nce again. Within the simulatin yu can use the Next maneuvre buttn t skip t the next manœuvre, t shrten real time navigatin. The time specificatins regarding trip duratin are adjusted accrdingly. In additin, all f the functins f yur navigatin system are available during simulatin. 23

27 Starting and displaying navigatin Directly after entering r selecting the desired rute, yu can start calculatin and thus navigatin fr this rute. Tip Yu can als start the current navigatin using the Start navigatin buttn in the navigatin menu. During navigatin the Stp navigatin appears instead. Use this buttn t end the current navigatin. Once navigatin has been started, yur navigatin system switches t the map view. The calculated rute is displayed there and cmpared t yur current psitin in real time. In split-screen mde the planned rute is displayed as fllws in the map view: The rute is displayed in a map sectin riented t the nrth. Yu can switch the map display frm 2D t a 3D view using the buttn if needed. The fllwing display mdes are available: The map is displayed in a tw-dimensinal view. If yu have set map view t Map in directin f travel in the Settings > Display menu, the map is always riented t the directin f travel. If yu have set the map view t Nrth up in the Settings > Display menu, the map is always riented t the nrth. If yu have selected the Optimized ptin, the map is riented t the nrth fr lw levels f zm and in the directin f travel fr higher levels f zm (see als Adjusting the display). In the mde 3D map, the map is tilted and three-dimensinal. The three-dimensinal display is always riented t the directin f travel. Tip In the tw-dimensinal display mdes, yu can manually mve the current map sectin by tapping a psitin within the map, hlding it dwn and mving it in the desired directin: The map sectin is autmatically adjusted. This functin is nt available in the three dimensinal mde! The map sectin is displayed n the right side f the screen. Tw ptins in split-screen are available n the left side: If the Pint f interest buttn is active, yu can select the tw clsest pints f interest directly using the tw buttns lcated abve. Yu can determine which pint f interest ca- 24

28 tegries shuld be displayed with the menu Settings > Display > Pints f interest settings. If the arrw key is active, navigatin is enhanced with the arrw view in additin t the map: When there is an upcming maneuvre, arrw rientatin indicates hw yu will be directed during the maneuvre. The distance t the next maneuvre is shwn n the segment chain lcated next t the arrw. Within the map sectin, the planned rute is shwn in blue. In case f a manual r autmatic traffic jam avidance, the alternative rute is shwn in red. The street n which yu are currently lcated is shwn n the upper edge f the screen. Prir t a maneuvre, the directin f navigatin is shwn in the arrw view, as is the distance t maneuvre. A-rads and mtrways are distinguished by clur and their number. Yur current psitin is displayed n the map using the symbl. Infrmatin regarding the current and average speed, the distance t the destinatin, remaining travel and arrival time (nly in the 480 x 272 pixel) is shwn n the infrmatin bar n the lwer edge f the map display (see als Operatin in the map view ). Yu can adjust the desired map zm in the menu Settings > Display > Aut-zm (see the Adjusting the display sectin). Yu can adjust the zm f the map sectin manually using the and buttns as needed. The current scale is displayed n the map. POIs such as petrl statins, rest areas etc. are displayed as symbls in the map display. Yu can determine which pint f interest categries shuld be displayed with the menu Settings > Display > Pints f interest settings. Tip Yu can manually mve the current map sectin within the screen if needed, in rder t, fr example, shw the POIs in the area f the calculated rute in the map view. T d s, tap a suitable psitin in the map sectin, hld the psitin and mve it arund the screen as desired: The map sectin is adjusted accrdingly. In additin t the visual navigatin, all maneuvres are annunced by vice cmmands at the same time, prvided yu have activated the feature in the menu Settings > Vice annuncements. Yu can adjust the vice utput during navigatin as fllws: Tap the buttn in the upper left area f the screen: The setting menu Vlume then pens, which allws yu t individually set the vlume fr vice utput, the key click and audi playback f MP3 files using the additinal MP3 Player applicatin. The vlume set here applies equally t playback via the internal speakers and via the earphne cnnectin (3.5 mm mini jack) n yur navigatin device. The buttns and allw yu t individually lwer r raise the vlume fr the respective signal utput in seven steps. Output fr the respective signal is muted at the lwest level. Nte The vlume setting is saved and the stred value will be used the next time yu start-up yur navigatin system. 25

29 Other views Yu can call up alternative views t the map display in the Quick menu. The Quick menu settings are described in the Adjusting the Quick menu settings sectin. Cmpass display In cmpass display, yur current psitin is shwn in relatin t the fur cardinal pints, Nrth being labelled in clur fr better rientatin. In additin, yur current psitin is stated with lngitude and latitude in degrees, arc minutes and arc secnds. The cmpass rientatin as well as the lngitude and latitude display is cntinuusly updated t enable precise rientatin. As a rule, hwever, the accuracy f the measurement and the display depend n the quality f the GPS receptin signal: Fr this reasn, the GPS receptin quality is als indicated as a value in the HDOP field. In additin, the number f satellites currently receiving the signal is displayed next t the symbl. The infrmatin bar in the lwer prtin f the windw shws all f the ther infrmatin abut the current rute (such as speed, distance, calculated travel time etc.). Tip Yur navigatin system uses the signals frm several satellites t determine the psitin. There may be verlap between the sectin areas f these satellite signals which reduces measuring accuracy. The HDOP value indicated in the cmpass describes the measuring accuracy within the hrizntal 2D map: Fr values in the range t 6, a high t satisfactry measuring accuracy is guaranteed, fr values ver 6 deviatin is increasingly cmmn. Nte Any speed limits entered fr the current rute sectin are displayed in the left crner using the symbl. A spken warning nly ccurs if the Warning signs ptin in the Settings > Cnfigure special functins menu and the Traffic advice in the Settings > Vice annuncements menu have been activated and the speed has been exceeded by this value. 26

30 Arrw view In the arrw view, yu are guided by a guidance system based n arrws, independent f a map. The arrw view prvides the fllwing infrmatin: The current directin f travel is described using the arrw. When there is an upcming manœuvre, the rientatin f the arrw indicates in what directin yu will be led during the maneuvre. Depending n the manœuvre, side streets may als be displayed, but the main rute is always clearly marked. The distance t the next manœuvre is shwn using the segment chain beside the arrw: The clser the manœuvre cmes, the mre segments in the chain are filled. This allws yu t readily estimate the actual distance frm the manœuvre based n yur speed. The street n which yu are currently lcated is shwn n the upper edge f the screen, as is the rute that yu must travel n this street t the next maneuvre. A-rads and mtrways are distinguished by clur and their number. If maneuvre is imminent, the display is switched: Nw the distance t the manœuvre is shwn as well as the street/directin in which yu will be guided after the maneuvre. The infrmatin bar in the lwer prtin f the windw shws all f the ther infrmatin abut the current rute (such as speed, distance, calculated travel time etc.). Trip inf In the Trip inf view, the fllwing infrmatin is displayed abut the current navigatin: Maximum speed Average speed Rute travelled Travel time This infrmatin refers t all f the rutes travelled since the last time the Trip inf was reset (see belw). T measure infrmatin abut a specific rute, yu must reset the trip inf at the start f navigatin. T d this, activate the buttn: All values are reset t 0 and the measurement is restarted. Nte 27

31 The values in the Trip infs are autmatically reset t 0 if yur navigatin device has received n valid GPS data packet in tw hurs. Chapter 4: Adjusting the Settings After starting yur navigatin device, the screen gives yu the available functin areas f yur navigatin system t chse frm. This buttn starts the the map view. This buttn starts the navigatin menu. This buttn starts the Other applicatins menu. Infrmatin abut perating the ther functins n yur navigatin system can be fund in the device manual. Use this buttn t start the settings menu t adjust the basic settings f yur navigatin system. The available setting ptins are described in the fllwing sectin. If yu want t accept the default settings f yur navigatin system r have already made yur persnal settings, yu can skip the fllwing pages and g directly t the next chapter. Specific settings fr the navigatin sftware After start-up, yur navigatin system launches the settings assistant that guides yu thrugh all the imprtant settings step by step. Yu can als accept the default settings, which yu can change at any time in the Settings menu t meet yur persnal needs. Open the Settings menu by pressing the buttn, available at the lwer edge f the screen in the Navigatin menu. The settings assistant can als be called up at a later time using the settings menu f the same name. 28

32 Chse frm the fllwing setting menus: Rute ptins Display Language settings Prgram settings Device settings Cnfigure special functins Settings assistant The fllwing describes the available setting menus as well as the setting ptins available there. Yu can change the chsen settings again at any time. Adjusting the rute ptins This sub-menu allws yu t adapt the rute calculatin and navigatin t yur current persnal needs. Nte that the rute ptins can affect each ther: Depending n the selectin f rute type, ther rute ptins will be autmatically deactivated. Using the buttns in the Rute ptins menu, yu can select the desired rute t adjust the respective rute ptins. The fllwing ptins are generally available fr selectin: Type f vehicle Cars Rute calculatin has been ptimised fr cars. Rad traffic regulatins are in effect fr this setting: This means that all rads may generally be used; hwever ne-way streets may nly be driven n in the prper directin f travel. As a rule, pedestrian znes are nt directly accessible and a crrespnding message is emitted. Pedestrians Rute calculatin has been ptimised fr Pedestrians (pssible in a radius f up t 50 km frm the current psitin): Ftpaths and cycling paths have als been taken int accunt when calculating the rute; ne-way streets can be used in bth directins f travel and 29

33 Rute type pedestrian znes are directly accessible. The shrtest rute is always calculated and the traffic jam detur functin is generally nt active. The use f mtrways and tll rads is excluded; the crrespnding rute ptins are autmatically deactivated (see later sectin). Bicycle Rute calculatin has been ptimised fr Bicycle (pssible in a radius f up t 50 km frm the current psitin): Cycling paths have als been taken int accunt when calculating the rute, pedestrian znes are directly accessible. The shrtest rute is always calculated and the traffic jam detur functin is generally nt active. The use f mtrways and tll rads is excluded; the crrespnding rute ptins are autmatically deactivated (see later sectin). Shrt Rute calculatin ptimised with respect t distance: The shrtest pssible rute is calculated. Fast Rute calculatin ptimised with respect t travel time: The fastest pssible rute is calculated. Ecnmic The rute calculatin represents a cmbinatin f the quickest and shrtest rute: This is the ecnmic rute. The fllwing ptins are then nly available if the crrespnding map data has been installed n yur navigatin device. Fr further infrmatin, see Manual actins fr data exchange. By pass Traffic-flw ptimised Using the Traffic-flw ptimised ptin lets yu identify the fastest pssible rute. Hwever, in ding s the navigatin device accesses specific infrmatin n traffic density which is indicated in the map material: junctins fr which there is the risk f a traffic jam at the time f the rute calculatin, are avided. Instead, an alternative rute t the junctins is calculated, with ptimised traffic flw. Nne The traffic jam avidance functin is nt active: Current traffic infrmatin (TMC) nt taken int accunt during navigatin. Manual When the manual traffic jam avidance functin is active, a warning symbl n the map view indicates the next traffic disruptin n yur rute that will affect yur travel time. Autmatic When the autmatic traffic jam avidance functin is active, the navigatin sftware autmatically uses available traffic infrmatin t calculate deturs arund traffic disruptins in yur way that wuld affect yur travel time. Tip Ferries The traffic jam avidance ptin selected is als used fr the TMC settings in the Prgram settings menu and can als be changed there (see Adjusting the Prgram settings). 30

34 Use The use f ferries is taken int accunt fr the purpses f rute calculatin. Mtrways Avid The use f ferries is excluded frm rute calculatin. Use In additin t rural rads, rads and A-rads, mtrways are als cnsidered during rute calculatins. Tll Rads Avid The use f mtrways is excluded frm rute calculatin: Only rural rads, rads and A- rads are cnsidered during rute calculatin. Use Tll rads are cnsidered fr rute calculatin. Avid The use f tll rads is excluded frm rute calculatin. Tip Althugh the map material is up-t-date at the time the device was delivered, there is n guarantee that all f the tll rads are indicated. Adjusting the Display In this sub-menu yu can adjust the appearance f the tuchscreen n yur navigatin system t meet yur persnal needs. Chse frm the fllwing ptins: Map view Map nly In the Map nly mde, the map is still shwn during a maneuvre. A smaller versin f the maneuvre arrw pps up in the map. Arrw view In the arrw view mde, navigatin is shwn nly by a maneuvre arrw; n map view is shwn. Yu can als use the Quick menu t activate the arrw view. Map ff In the Map ff mde, n infrmatin is shwn n the tuchscreen: navigatin is via vice cmmands nly. Split screen In the Split screen mde, the display is divided. While the map is shwn n the right side f the screen, yu can chse between pints f interest and the arrw view n the left side. In the pints f interest view, the clsest pints f interest are available fr direct selectin; in arrw view, maneuvre arrws shw the navigatin. Swap map and arrw In the swap map and arrw mde, the display changes dynamically frm map view t arrw view during a maneuvre. After the maneuvre, the display switches back t map 31

35 view. Swap map and split-screen In the swap map and split-screen mde, the display changes dynamically frm map view t split-screen view during a maneuvre. After the maneuvre, the display switches back t map view. Day/night design Autmatic Map design adjusts autmatically t daylight r darkness depending n the current time. Day design The map is displayed in a design ptimised fr daylight viewing. Night design The map is displayed in a design ptimised fr night time viewing. Tip Adjust the settings fr daytime and night time viewing as needed in the menu Basic settings > Screen settings > Set brightness (see the Screen settings sectin). Pints f interest settings Pints f interest n the map Yu can select the pints f interest categries t be displayed in map view in this selectin list. T d s, tap the buttn next t the pints f interest categry: The display status is switched accrdingly and the selectin is transferred t the map. Pints f interest in split-screen In this selectin list, yu can select which pints f interest categries are shwn in the split-screen and are available fr selectin (pints f interest categry selectin mde). T d s, tap the buttns next t the pints f interest categry fr this. The display status is switched accrdingly and the selectin is transferred t the selectin keys in the splitscreen. Preferred petrl statins In this selectin list yu select which petrl statin brand(s) shuld be shwn n the map and in the split-screen. T d s, tap the buttn switch the display status. next t the petrl statin brand t Tip Using the Shw all pints f interest buttn at the bttm f the screen, yu can switch the status f all available entries glbally. 2D map rientatin Nrth up In the Nrth up mde the map is alway shwn in the directin f nrth: in real terms, this means that directin yu are travelling in may differ frm r even be the cmplete ppsite f the map rientatin. Map in directin f travel In the Map in directin f travel mde the map is always shwn in the directin yu are currently travelling in: depending n the level f zm, it may be that the regin r land 32

36 yu are currently driving in is shwn n its side r upside dwn n the screen. Optimised In the Optimised mde the map is riented t the nrth r the directin f travel, depending n the map scale. In real terms this means that Tip At high zm levels (extreme enlargement f the map sectin), the map is displayed in the directin f travel, thus making rientatin based n the surrundings easier. At lw zm levels (minimal enlargement f the map sectin), the map is autmatically rtated s that it always faces nrth: This mde imprves clarity and prevents cuntries r regins frm being displayed upside dwn. Switching between the 2D and tilted 3D map view is nly pssible using the nscreen cmpass symbl. Time frmat 24 h All time infrmatin within the navigatin sftware is displayed using the 24-hur clck. 12 h All time infrmatin within the navigatin sftware is displayed using the 12-hur frmat (AM/PM). Aut zm Nearby The current map sectin is magnified t a high zm level. Medium When the aut zm functin is active, the current map sectin is enlarged t a medium zm level if a maneuvre is t be perfrmed sn. Far The current map sectin is reduced t a lw zm level. Adjusting the language settings In this sub-menu yu can adjust language-specific parameters. Language The menu language f the navigatin sftware is pre-set by selecting the cuntry-specific installatin file r by selecting the language during installatin. If several languages have been pre-installed n yur navigatin device, yu can select anther language by tapping the desired entry in the selectin list displayed here. Tip Subsequent installatin f ther languages is pssible by selecting cuntry-specific installatin files in the GPal Assistant (see Actins using the Cntent Imprt Wizard). Keybard selectin Alphabetical Entries are made alphanumerically (e. g. cuntry, place and street names) n a keybard with an alphabetically rganised standard keybard layut. 33

37 German The arrangement f the keys is switched t the QWERTZ keybard layut develped fr typewriters and cmputer keybards, intended fr German-speaking areas as well as Pland, the Czech Republic and Russia. English The arrangement f the keys is switched t the QWERTY keybard layut develped fr typewriters and cmputer keybards, intended fr English-speaking areas, Scandinavia, Italy, Turkey, Greece, Prtugal and the Netherlands. French The arrangement f the keys is switched t the AZERTY keybard layut develped fr typewriters and cmputer keybards, intended fr French-speaking cuntries. Cyrillic The arrangement f the keys is switched t the keybard layut develped fr the Russian Cyrillic alphabet. Greek The arrangement f the keys is switched t the keybard layut develped fr the Greek Cyrillic alphabet. Vice annuncements Street names If this ptin is active, the street name is annunced fr the next maneuvre. Traffic advice If this ptin is active, traffic advice is given fr the next maneuvre. Directins If this ptin is active, the directin is annunced fr the next maneuvre. Adjusting the Prgram settings In this sub-menu yu can adjust prgram-specific parameters. TMC settings This sub-menu allws yu t adjust the receptin f TMC, TMCpr, V-Trafic and Trafficmaster traffic news, as lng as these services are available in this versin f yur navigatin sftware. Nte TMC is a digital radi data service which transmits infrmatin abut traffic cngestin via the Radi Data System (RDS) and can be interpreted by yur navigatin device. TMC uses data supplied by the plice, traffic jam reprts r ther available surces. TMCpr, n the ther hand, accesses infrmatin recrded by autmatic data sensrs n mtrway bridges, sensrs integrated int the carriageway and vehicles with "Flating Car Data" (FCD) technlgy. If yur navigatin device is equipped with Premium TMC, the French traffic service V- Trafic and Trafficmaster frm the UK are als available t yu. The receptin quality f the traffic service signal is indicated via the status indicatr n the upper edge f the map view. If yur navigatin system is designed t receive TMC news, yu can select the fllwing ptins using the buttns in the lwer prtin: By pass Nne Traffic jam avidance based n TMC infrmatin is nt active. 34

38 Manual With manual traffic jam avidance, nly a warning symbl in map view warns yu f any traffic prblems transmitted by TMC. Autmatic The device calculates an autmatic traffic jam avidance (see als the Adjusting the rute ptins sectin) using the available TMC infrmatin. Statin search Autmatic Yur navigatin device autmatically searches fr a statin. If receptin quality deterirates, the device immediately starts searching fr a new statin. Manual Using the manual statin search, yu can permanently set a TMC statin using the and buttns. If receptin quality deterirates, the device des nt search fr a new statin. Nte The and buttns are nly available if yu search fr the TMC statin manually. TMC Prvider All Yur navigatin device receives TMCpr, V-Trafic and Trafficmaster news at the same time: TMCpr traffic infrmatin is indicated separately in the list display. TCMpr Yur navigatin device receives nly TMCpr news, nt TMC, V-Trafic r Trafficmaster (if available fr yur device). Tip Yu can retrfit the cmmercial services V-Trafic and Trafficmaster if needed: In this case, traffic infrmatin fr France and the UK is als available. Time zne The navigatin sftware time zne is set t Greenwich Mean Time. This setting crrespnds t the time zne in Edinburgh, Lisbn, Lndn. The time zne f the navigatin sftware is preset t GMT+1:00 (Greenwich Mean Time plus 1 hur). This setting crrespnds t the time zne in Amsterdam, Berlin, Rme. The time zne is set t Greenwich Mean Time plus 2 hurs. This setting crrespnds t the time zne in Athens, Istanbul, Minsk. The time zne is set t Greenwich Mean Time plus 2 hurs. This setting crrespnds t the time zne in Helsinki, Kiev, Riga, Sfia. The time zne is set t Greenwich Mean Time plus 3 hurs. This setting crrespnds t the time zne in Mscw, Saint Petersburg, Vlggrad. The time zne is set t Greenwich Mean Time plus 4 hurs. This setting crrespnds t the time zne in Samara. The time zne is set t Greenwich Mean Time plus 5 hurs. This setting crrespnds t the time zne in Ekaterinburg. 35

39 The time zne is set t Greenwich Mean Time plus 6 hurs. This setting crrespnds t the time zne in Omsk. The time zne is set t Greenwich Mean Time plus 7 hurs. This setting crrespnds t the time zne in Krasnyarsk. The time zne is set t Greenwich Mean Time plus 8 hurs. This setting crrespnds t the time zne in Irkutstk. Security mde Activated With this ptin yu can activate the security mde: The security mde disables tuchscreen peratin f the device while driving t prevent distracting yu frm the traffic. Deactivated With this ptin yu can deactivate the security mde: Tuchscreen peratin f the device is pssible while driving. Active map The selectin fr the currently active map material is displayed here. If yu have installed additinal map material n yur navigatin system, yu can select alternative maps here. Plt GPS track Deactivated The rute already driven r cmpleted is nt pltted and saved as a GPS track n yur navigatin device. Activated If yu select this ptin, current rute pltting begins immediately. Pltting is stpped if yu reset the infrmatin in thetrip inf view (see the Trip inf sectin) r select the Plt GPS track: Deactivated ptin. Unit Metric All infrmatin n rutes is prvided in metric frm. Annuncements and infrmatin f distance n the screen are based n kilmetres/metres. Imperial All infrmatin n rutes is prvided in imperial frm. Annuncements and infrmatin f distance n the screen are based n miles/feet. Versin infrmatin This buttn displays the manufacturer and versin infrmatin fr the currently installed map material. Adjusting the device settings Chse frm the fllwing setting menus: Vlume Screen settings Pwer management Security settings (depending n device) FM transmitter (depending n device) Restre factry settings 36

40 Tap ne f the buttns t pen the crrespnding sub-menu. T clse the menu again, tap the buttn. Vlume settings In this sub-menu, yu can set the vlume individually fr the vice utput, the key click and audi playback f MP3 files via the additinal MP3 player applicatin. The vlume set here applies equally t playback via the internal speakers and via the earphne cnnectin (3.5 mm mini jack) n yur navigatin device. The buttns and allw yu t individually lwer r raise the vlume fr the respective signal utput in seven steps. Output fr the respective signal is muted at the lwest level. Screen settings This sub-menu allws yu t individually adjust the brightness settings fr daytime/nighttime peratin and t calibrate the screen. When yu tap the Setup brightness buttn, yu can individually lwer r raise the Brightness level daytime and Brightness level nighttime t six levels using the and buttns. Tapping the Calibrate display buttn allws yu t recalibrate the tuchscreen f yur navigatin device. This becmes necessary when the entries n the tuchscreen n lnger crrespnd t the actins perfrmed: Fr example, the assignment f keys t apprpriate symbls r cmmands may deviate frm the instructins. T calibrate the device, fllw the instructins n the screen by tapping the target sign. Finally, accept the new settings by tapping the screen again. Nte If yu frmat the flash memry f yur navigatin device in rder t, fr example, update t a newer versin f the sftware, the screen must als be recalibrated during installatin (refer als t the device manual). The brightness settings will be saved and the stred value will be used the next time yur start-up yur navigatin system. Pwer management This sub-menu enables yu t adapt the energy ptins fr either battery r mains peratin. The current charge f the battery is displayed n a bar chart n the lwer prtin f the screen. If yu tap the selectin menu under the entry In battery mde yu can select ne f the fllwing ptins frm the list in the relevant pp-up menu: Deactivated The navigatin device is nly switched ff when the capacity f the internal battery has been exhausted. 15/30/45 min/ 1/2 hr If the navigatin device is neither in use nr currently navigating, it is switched t stand-by mde fllwing a pre-set perid f time: When yu press the ON/OFF switch, the device is reactivated and the mst recently active screen is displayed. If yu tap the selectin menu under the entry Cnnected t charger yu can select ne f the fllwing ptins frm the list in the relevant pp-up menu: Deactivated The navigatin device is never switched ff. 15/30/45 min/ 1/2 hr 37

41 If the navigatin device is neither in use nr currently navigating, it is switched t stand-by mde fllwing a pre-set perid f time: When yu press the ON/OFF switch, the device is reactivated and the mst recently active screen is displayed. In the Aut-Standby menu yu determine hw the device reacts when the pwer supply plug is pulled ut while charging r while the device is in peratin. Deactivated The device remains switched n regardless f the status f the pwer supply until the internal vltage has been exhausted. In this case, the settings yu set in Pwer Management are valid. 1 Minute When yu tap the ptin 1 Minute in the list, the device is autmatically switched ff 1 minute after the plug has been pulled ut. 2 Minutes When yu tap the ptin 2 Minutes in the list, the device is autmatically switched ff 2 minutes after the plug has been pulled ut. 5 Minutes When yu tap the ptin 5 Minutes in the list, the device is autmatically switched ff 2 minutes after the plug has been pulled ut. If yu did nt select Aut-Standby: Deactivated, yur navigatin device displays the fllwing screen after the pwer supply plug has been pulled ut. The The The buttn returns yu t the screen that was active befre the plug was pulled ut. buttn switches the device ff. buttn restarts the device. If yu d nt make any entry, the device switches t Standby mde after 5 minutes. Nte Please be aware that this functin is nly available n certain types f device. Security settings Yur navigatin system gives yu the ptin f prtecting yur system frm access using a userdefined passwrd. Mre infrmatin n the security settings can be fund in the device manual. Nte Please be aware that this setting is nly available n certain types f device. 38

42 FM transmitter Further infrmatin abut the FM transmitter settings can be fund in the device manual. Nte Please be aware that this setting is nly available n certain types f device. Restre factry settings This buttn allws yu t restre the factry default settings t the device. All persnal settings such as favurites r the last entered destinatins are deleted in the prcess: Accrdingly, yu shuld nly perfrm this functin when yu n lnger need this infrmatin. When yu tap the buttn, a cnfirmatin message pps up n yur navigatin device. Tap the buttn t restre the factry settings: Otherwise yu can cancel the prcess with the buttn. After the restart yu must then select the language within the sftware. In additin, yu have anther pprtunity t familiarise yurself with yur navigatin system by way f a brief intrductin after the navigatin sftware starts: Yu can als skip this step and start perating yur navigatin system immediately, as required. Adjusting the special functins Warning signs Activated If this ptin is activated warning signs ntify yu f hazardus areas and special traffic rules while driving. Speed limit Deactivated If this ptin is nt activated, yu are nt given visual indicatins f hazardus areas and traffic rules. D nt shw The maximum speed limit infrmatin stred in the map material fr each rute sectin is nt displayed nscreen and it is als nt dcumented by an acustic warning when the speed limit is exceeded (setting: D nt shw). Shw withut warning The speed limit fr this sectin f rad is displayed n the map but yur navigatin system des nt emit an acustic signal when the limit is exceeded. Warning at 5 km/h (alternative settings: 10/15/20/25/30 km/h) The speed limit fr this sectin f rad is displayed n the map. Yur navigatin system als emits an acustic warning signal when yu exceed the speed limit by the selected amunt. 39

43 Nte Depending n the distance frmat in the Prgram settings > Units (see belw), exceeding the speed limit is measured and annunced in kilmetres per hur (metric) r miles per hur (imperial). Hwever, the actual measurement fr exceeding the speed limit is always based n the distance frmat stated in the map material and valid in the respective cuntry: Fr example, the measurement fr exceeding the speed limit in England is made in miles even if yu have selected km fr the distance frmat. Settings assistant Using this buttn yu can start the settings assistant, which als appears when yu first start up yur navigatin device. The settings assistant helps yu select apprpriate settings fr yur navigatin device: Yu adjust the settings in steps by navigating between the setting ptins using the and keys. The settings assistant can be pened at any time and clsed using the buttn. The settings made s far verwrite the settings that were previusly valid fr yur navigatin device. Adjusting the Quick menu settings The Quick menu is available by pressing the buttn lcated in the lwer right crner f the map view, giving yu direct access t functins therwise nly available using the cnventinal menus. Yu can assign the ptin City t ne f the Quick menu buttns, fr example: In future yu will jump directly t the city input field n the Enter address screen, when yu tap the buttn. Yu culd als assign, fr example, the additinal MP3 Player applicatin t anther Quick menu buttn in rder t call this applicatin up directly. Ding this allws yu t cnfigure up t fur frequently used functins and call them up quickly using the Quick menu buttns. Prceed as fllws t assign the desired functins t the buttns in the Quick menu: 1. Tap n the buttn Quick menu settings in the tlbar in the Quick menu. A message then appears, prmpting yu t select ne f the screen keys t change its functin. 2. Tap any buttn t set up a new functin assignment r t change the existing assignment. 3. On the screen Quick menu settings, tap the buttn fr the main grup belnging t the desired functin. Chse frm the fllwing main grups: Destinatin entry Rute infrmatin Other applicatins 40

44 Pints f interest Settings Other views 4. Tap the buttn fr the desired functin available fr selectin within the main grup. This functin is nw assigned t the Quick menu buttn. If yu wish t leave this screen withut making a selectin, tap the. 41

45 GPal Navigatr 5 Chapter 5: Manual installatin and start-up The Windws CE perating system has already been installed n yur navigatin device. In additin, sftware cmpnents such as the navigatin sftware r map material fr varius cuntries (depending n the versin) may already be pre-installed n the device r n the memry card supplied. If that is nt the case, yu must first install the navigatin sftware as well as the map material necessary fr rute planning befre perating yur navigatin system. If yu are updating r wuld like t install subsequently purchased navigatin sftware r additinal maps r POI files t yur navigatin device, yu must remve individual r all data installed n yur device befre installing the newly purchased sftware. The fllwing data can be manually installed by the user: GPal Navigatr navigatin sftware Map material in the frm f PSF files Pint f interest data (POI data) in the frm f PSF data Vice recgnitin data in the frm f TSD data Tip Even thugh it is pssible t install files manually, we recmmend that yu use the G- Pal Assistant supplied with the sftware t transfer and update sftware cmpnents n yur navigatin system. The next chapter describes the installatin and data exchange using the GPal Assistant. The manual transfer f sftware cmpnents frm CD/DVD t yur mbile navigatin device takes place in Windws Explrer n yur PC. Select ne f the tw fllwing methds t exchange data between yur navigatin system and yur PC: If yu have installed the Micrsft ActiveSync sftware frm a CD/DVD, yu can cnnect yur navigatin device directly t the USB prt f yur PC using the USB cable supplied in rder t synchrnise the desired data. In this case, yu have direct access t the internal flash memry f yur navigatin device. If yur PC has a card reading device, yu can insert the external memry card supplied directly and manually mve the data in the file explrer. In this case, yu d nt have direct access t the internal flash memry f yur navigatin device. Initial peratin Depending n the versin f yur navigatin system, the sftware necessary fr peratin may nt have been pre-installed n yur navigatin device and can instead be fund n the memry card supplied: an apprpriate cmment indicating this can be fund in the readme file as well as n the packaging f yur navigatin device. In this case, yu must install the sftware t perate yur navigatin system. Prceed as fllws t install: 1. Carefully remve the memry card frm its packaging. Take care that the cntacts are nt tuched r cntaminated: Otherwise data transfer may n lnger be pssible. 2. Insert the memry card int the MMC/SD card slt f yur navigatin device until yu hear a click. 3. Switch n the navigatin device by pressing the ON/OFF switch n the device (see device perating instructins). 42

46 Manual installatin and start-up The necessary sftware cmpnents will nw be installed autmatically. If yu switch n yur navigatin device withut inserting the memry card supplied, the fllwing screen appears. Insert the memry card int yur device and tap the buttn, t begin autmatic installatin. Once installatin is cmplete, the start screen f yur navigatin system appears, giving yu access t the varius functins such as the navigatin r MP3 Player etc.. Reinstallatin and updating the sftware If necessary, yu can remve all r individual applicatin files such as the navigatin sftware r map material frm the memry f yur navigatin device (see device perating instructins). This wuld be necessary, fr example, t install a current versin f the GPal Navigatr sftware that yu purchased at a later date. The sftware required fr reinstallatin/updating is lcated in the Installatin flder n the CD/DVD and can be transferred t the navigatin device using the memry card supplied. Prceed as fllws t manually install the navigatin sftware nt the external memry card: 1. If yu have nt already dne s, carefully remve the memry card frm its packaging and insert it int the card reading device (internal r external) f yur PC: If the card clicks in crrectly the cntents f the card will be displayed in a new windw in Windws Explrer. If the cntents are nt autmatically displayed, pen the directry manually. 2. Open yur PC s CD/DVD drive and insert the CD/DVD. If the CD/DVD Setup Assistant starts, clse it. 3. Open the directry f yur CD/DVD drive using the cntext-dependent menu btained by clicking the right muse buttn and g t the directry Installatin. 4. Cpy all f the flders and files in this directry. 5. G t the directry windw f the external memry card and insert the cpied cntents. T install the sftware cpied nt the memry card n yur navigatin device, fllw the steps described in the Initial peratin sectin. Nte Yu must remve the ld sftware cmpnents befre yu can install the new sftware nt yur navigatin device. Fr infrmatin n hw t d this, cnsult the perating instructins fr yur navigatin device. 43

47 Manual installatin and start-up Transferring the map material and the POI data t the memry card Regardless f the navigatin sftware, yu can als install additinal map r POI material nt yur device r replace existing data with current material frm a CD/DVD purchased subsequently. Hwever, yur navigatin device can nly read this data autmatically if they have been filed in the MapRegins directry n the memry card. Nte Befre yu buy additinal maps r POI material frm the GPal-Shp Prtal, yu must ensure that the data packs are cmpatible with yur installed GPal-sftware versin. Infrmatin n cmpatibility can be fund in the Shp in the prduct descriptin f the data. Prceed as fllws t transfer map material and POI data t the memry card: 1. Insert the memry card int the card reading device (internal r external) f yur PC: The card clicks in and the cntents f the card will be displayed in a new windw in Windws Explrer. If the cntents are nt autmatically displayed, pen the directry manually. 2. Open yur PC s CD/DVD drive and insert the CD/DVD. If the CD/DVD Setup Assistant starts, clse it. 3. Open the directry f yur CD/DVD drive and g t the MapRegins directry. 4. Cpy all f the desired files with the file ending.psf: The file names indicate the regin t which the map data refers. 5. G t the directry windw f the external memry card and create a new flder called MapRegins. 6. Nw put all f the cpied files int this flder. Prceed as fllws t cpy additinal POI files frm the inserted CD/DVD t the memry card: 1. Open the POI flder in the directry f yur CD/DVD drive. 2. Cpy the desired files (e. g. htel.de.psf etc.). 3. G t the directry windw MapRegins f the external memry card and insert the cpied cntents. T install the map material and/r POI files cpied nt the memry card n yur navigatin device, fllw the steps described in the Initial peratin sectin. Nte Yu must remve (sme f) the ld files befre yu can install the new map and/r POI files nt yur navigatin device. Fr infrmatin n hw t d this, cnsult the perating instructins fr yur navigatin device. Nte that it is nly pssible t transfer files t the memry card and/r t the internal memry f yur navigatin device (see next sectin) if there is enugh free disk space available. Yu may have t delete unnecessary data t free up disk space. Transferring data t the internal memry f the navigatin device Yur mbile navigatin device has an internal, permanent memry that is lcated in the My Flash Disk flder. Yu can use this memry t transfer and then install the navigatin sftware, map material and/r vice recgnitin files t yur navigatin device. Hwever, yu must have previusly 44

48 Manual installatin and start-up installed the sftware Micrsft ActiveSync supplied n the CD/DVD nt yur PC either manually r using the Setup Assistant n the CD/DVD. In additin, yur navigatin device must be cnnected t the PC using the USB cable supplied. The fllwing descriptin assumes that Micrsft ActiveSync has already been installed. Prceed as fllws t cpy the installatin files fr yu navigatin sftware t the internal memry f yur navigatin device: 1. Cnnect the navigatin system t yur PC using the USB cable. 2. Once the navigatin system has been recgnised, the dialg bx New Partnership pps up n yur PC screen. T transfer the files it is sufficient t cnnect yur navigatin device t yur PC as a Guest. S, chse the ptin N and then click n the buttn labelled Next. 3. Select Mbile device in yur Windws Explrer and g t the My Flash Disk directry. 4. Right click n the directry and select New flder frm the cntext menu: Name the newly created flder INSTALL and finish the entry by pressing the enter key. 5. Change t the Installatin directry in yur CD/DVD drive and cpy all files and flders in this directry. 6. G t the directry Mbile Device > My Flash Disk > INSTALL and put the cpied cntents there. Prceed as fllws t als cpy map material t the internal memry f yur navigatin: 1. G t the MapRegins directry f yur CD/DVD drive and cpy all f the desired files ending in.psf : The file names indicate the regin t which the map data refers. 2. Select Mbile device in yur Windws Explrer and g t the My Flash Disk directry. 3. Right click n the directry and select New flder frm the cntext menu: Name the newly created flder MapRegins and finish the entry by pressing the enter key. Nte T ensure errr-free transfer f the data yu must take care t enter the spelling f "MapRegins" exactly as given. Otherwise the data will nt be recgnised prperly. 4. Nw put all f the cpied files int this flder. If yu have added POI files r the vice cmmand feature t yur navigatin sftware, yu must transfer the apprpriate data t the internal memry f yur navigatin device r nt the memry card: the respective functin is nly available fllwing autmatic installatin f the data. Prceed as fllws t cpy POI and/r vice recgnitin files t the internal memry f yur navigatin device: 1. T transfer POI files, g t the POI directry f yur CD/DVD drive and cpy the desired PSF files (e. g. htel.de.psf). 2. G t the directry Mbile Device > My Flash Disk > MapRegins and put the cpied files there. 3. T transfer vice cmmand files, g t the TSD directry f yur CD/DVD drive and cpy yur cuntry-specific flder: The IrelandGreatBritainTSD flder, fr example, cntains the vice recgnitin files fr English-speaking cuntries. Naturally, yu can als cpy the vice cmmand files/flder fr ther cuntries as needed and install them nt yur navigatin device. G t the directry Mbile Device > My Flash Disk > MapRegins and put the cpied files there. 45

49 GPal Navigatr 5 Chapter 6: Installatin and start-up using the GPal Assistant In additin t manual installatin, it is als pssible t transfer the necessary data frm the CD/DVD t yur mbile device using the GPal Assistant sftware: The GPal Assistant is a special tl which facilitates cmmunicatin between yur navigatin device and yur PC and simplifies the transfer f selected files. In additin, it is nly with the help f the GPal Assistant that yu can transfer GPS track data that yu have recrded with yur navigatin device t the PC in rder t stre it there and exchange it with ther users. T use GPal Assistant, it must first be installed n yur PC. Tip Althugh manual installatin and transfer f data is pssible n yur navigatin device, we recmmend perfrming all installatins using the GPal Assistant sftware. Installing the GPal Assistant sftware As sn as yu insert the supplied CD/DVD int the drive n yur PC, a Setup Assistant pens autmatically t help yu with the installatin f varius sftware cmpnents n yur PC. Prceed as fllws t install the GPal Assistant n yur PC: 1. Open yur PC s CD/DVD drive and insert the supplied CD/DVD. Once the CD/DVD has been read in, the Setup Assistant starts autmatically: Cntinue t fllw the n-screen instructins. 2. In the dialg bx Select cmpnents, click the Medin GPal Assistant check bx (checked) t select the GPal Assistant fr installatin: If necessary yu can nw click n ther check bxes t install additinal sftware cmpnents (e. g. Medin GPal Navigatr, Micrsft Active- Sync, manuals etc.) in this step. After selecting the desired check bxes, click n the Cntinue buttn. Nte If yu are using the current Windws Vista TM perating system, the ptin ActiveSync is autmatically greyed ut, as this functinality is already integrated int the perating system and des nt need t be installed separately. 3. Yu must enter the strage path fr the installatin f the GPal Assistant in this dialg windw. Use the template r select an individual path and click Next. 4. This dialg windw allws yu t rename the flder individually (nt recmmended): Click Install t accept the default path and install the selected sftware cmpnents n yur PC. The GPal Assistant is installed in the prgram directry n yur PC and is available immediately fllwing installatin. If yu n lnger need the GPal Assistant, yu can remve it frm yur system either by ging t Cntrl panel > Sftware r by using the Uninstall cmmand lcated in the prgram directry under Start > All Prgrams > Medin GPal Assistant. 46

50 Operatin using the vice cmmand functin Micrsft ActiveSync must be installed n the PC t cmmunicate and transfer data with the G- Pal Assistant: Installatin can als be perfrmed using the Setup Assistant n the CD/DVD. In additin, the navigatin device must be cnnected t the PC via the USB cable. Tip ActiveSync is nly necessary when perating Windws 2000 SP4 r Windws XP. The sftware cmpnents necessary fr data exchange are already integrated int Windws Vista TM. User interface f the GPal Assistant Once it has been successfully installed, start the GPal Assistant via the item Medin GPal Assistant in the flder Start > All Prgrams > Medin GPal Assistant. The GPal Assistant interface is divided as fllws: Menu bar Yu can perate all f the basic functins f the sftware via the menu bar. The menus are structured as fllws: File. Using the ptin Imprt GPX Files yu can imprt recrded GPS tracks (e. g. hiking rutes) int yur library frm an external medium. Exit allws yu t clse the GPal Assistant. Actins Imprt Cntent int Library starts the Cntent Imprt Wizard, which helps yu transfer new cntent t the library f yur GPal Assistant (see Actins using the Cntent Imprt Wizard). Using the Check fr Sftware Update entry, yu can let the GPal Assistant autmatically search the Internet fr current sftware fr yur navigatin system. Using Check fr Cntent Update, yu can let the GPal Assistant autmatically search fr current cntent fr the infrmatin cntained in the library. Using Enter user infrmatin yu can pen a windw where yu can enter yur address and a passwrd. This infrmatin is required fr registratin at the GPal Shp prtal. 47

CAR ASYST - Quick Start Guide MAIN MENU

CAR ASYST - Quick Start Guide MAIN MENU fficially apprved by CAR ASYST - Quick Start Guide MAIN MENU Main menu The main menu f ur CAR ASYST APP is divided int 7 menu items. Belw yu will find a list f these items including a shrt descriptin.

More information

CUSTOMER PORTAL. Floorplan Management

CUSTOMER PORTAL. Floorplan Management CUSTOMER PORTAL Flrplan Management FLOORPLAN ANALYTICS The flrplan analytics area displays flrplans yu have uplad t the prtal (if yu haven t yet upladed a flrplan please cntact ur supprt department). Frm

More information

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1 Altis Flight Manager PC applicatin fr AerbTec devices AerbTec Altis v3 User Manual 1 Table f Cntents Intrductin...3 Requirements...3 Installatin...3 Applicatin...3 USB Driver fr Altis v3 interface ALink...4.NET

More information

The WHO e-atlas of disaster risk for the European Region Instructions for use

The WHO e-atlas of disaster risk for the European Region Instructions for use The WHO e-atlas f disaster risk fr the Eurpean Regin Instructins fr use 1 Last Update: June 2011 Cntents 1. Basic system requirements... 3 2. Structure f the WHO e-atlas... 4 2.1. Main menu... 4 2.1.1.

More information

1.12 Equipment Manager

1.12 Equipment Manager Mdule 1 Categry 1 1.12 Equipment Manager Functin f the windw The windw is the central data file fr the Kntrl Pr and cllects the main data fr fees f an bject that t be used in this prject. The Equipment

More information

Flash Image Rotator Web Part

Flash Image Rotator Web Part Flash Image Rtatr Web Part User Guide Cpyright 2007 Data Springs Inc. All rights reserved. Table f cntents: 1 INTRODUCTION...3 2 INSTALLATION PROCEDURE...4 2.1 After installatin ntes:...5 2.2 Trubleshting...6

More information

Upgrading to PlanetPress Suite Version 5

Upgrading to PlanetPress Suite Version 5 Upgrading t PlanetPress Suite Versin 5 Creatin date: September 2, 2005 Revisin date: June 14, 2006 Table f Cntents System Requirements... 4 Imprtant Cnsideratins... 4 Knwn Issues... 6 Prcedure t imprt

More information

Microsoft PowerPoint 2007

Microsoft PowerPoint 2007 Micrsft PwerPint 2007 Finding Presentatins n the Web Open the Internet and g t http://www.ggle.cm Click n Advanced Search. Enter wrds r phrases t describe desired results. On the File Frmat line, click

More information

Freading for Kindle Fire Using the SlideME app.

Freading for Kindle Fire Using the SlideME app. Harvard Public Library www.harvardpubliclibrary.rg Freading fr Kindle Fire Using the SlideME app. Freading is an e-bk cllectin, available t Harvard Public Library cardhlders, that ffers tens f thusands

More information

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server.

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server. Autmatic impsitin Page 1/8 Autmatic impsitin Descriptin Autmatic impsitin will d the mst cmmn impsitins fr yur digital printer. It will autmatically d flders fr A5, A4 r US Letter page sizes in either

More information

RiverSurveyor S5/M9 & HydroSurveyor Second Generation Power & Communications Module (PCM) Jan 23, 2014

RiverSurveyor S5/M9 & HydroSurveyor Second Generation Power & Communications Module (PCM) Jan 23, 2014 SnTek, a Xylem brand 9940 Summers Ridge Rad, San Dieg, CA 92121-3091 USA Telephne (858) 546-8327 Fax (858) 546-8150 E-mail: inquiry@sntek.cm Internet: http://www.sntek.cm RiverSurveyr S5/M9 & HydrSurveyr

More information

DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732

DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732 Prgram Infrmatin 1 DXF2DAT 3.0 Prfessinal Designed Cmputing Systems 848 W. Brtn Rad Essexville, Michigan 48732 Cntact: (989) 892-4376 website: http://www.famwrk.net General Infrmatin: inf@famwrk.net Technical

More information

Excel Step by Step Instructions Creating Lists and Charts. Microsoft

Excel Step by Step Instructions Creating Lists and Charts. Microsoft Infrmatin Yu Can Enter in a Wrksheet: Labels: Any type f text r infrmatin nt used in any calculatins. Labels are used fr wrksheet headings and make wrksheets easy t read and understand. Labels can als

More information

Security Exercise 12

Security Exercise 12 Security Exercise 12 Asynchrnus Serial Digital Baseband Transmissin Discussin: In this chapter, yu learned that bits are transmitted ver a cpper wire as a series f vltage pulses (a prcess referred t as

More information

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR.

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR. NanScan v2 Readme Versin 2.7 Change lg v2.7 - Added infrmatin fr new prduct Pyr/9/5-MIR. v2.6 - Redesigned Messages windw. Imprved readability and ease f use. Mves almst all pp up message bxes int the

More information

User Guide. ACC Mobile 3 Preview App for ios

User Guide. ACC Mobile 3 Preview App for ios User Guide ACC Mbile 3 Preview App fr ios 2017, Avigiln Crpratin. All rights reserved. AVIGILON, the AVIGILON lg, AVIGILON CONTROL CENTER, ACC, and TRUSTED SECURITY SOLUTIONS are trademarks f Avigiln Crpratin.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad with min. 5 kg 405000090 405070090 INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main dimensins. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

Support Subscribers call

Support Subscribers call Prduced by Cmputer Helper Publishing (CHP). We hpe this sftware makes the tasks f Church administratin easier and mre efficient. Any questins that cannt be answered by these help files shuld be directed

More information

Documentation of the PIC32 Pin Finder

Documentation of the PIC32 Pin Finder App. Versin: 1.1.1.120 Dcument Versin: 1.0 Dcument Create date: 2009-10-16 Dcument Update: 2009-10-19 22:37 Authr: B Gärdmark Cmpany: Spectrn System Develpment AB WEB: www.spectrn.us Cpyright 2009 All

More information

Using the Laser Cutter

Using the Laser Cutter Using the Laser Cutter Prerequisites Befre yu will be allwed t use the laser cutter, yu must cmplete these three steps: 1. Yu must have cmpleted the Laser Cutter training at Cyberia 2. Yu must schedule

More information

Operating Instructions

Operating Instructions TC 60/8 THERMOCOMPUTER TC 60/8 temp / time s s temp / time k start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing

More information

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software Manual Zeiss Axi Zm.V16 micrscpe and ZEN 2 Pr sftware 15-9-2015 Fred Hartjes EMS 3 Caxial illum. Ring illum. Starting up Pwer n Actuate the knb n the EMS 3 cntrl unit Switch n the caxial illuminatin Switch

More information

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons. Order N. : 5323 02 Operating instructins 1 Safety instructins Electrical devices may nly be munted and cnnected by electrically skilled persns. Serius injuries, fire r prperty damage pssible. Please read

More information

Figure 1: View, connection compartment closed

Figure 1: View, connection compartment closed Radi Management Art. N. : 2700AP Operating instructins 1 Safety instructins Electrical equipment may nly be installed and fitted by electrically skilled persns. Serius injuries, fire r prperty damage pssible.

More information

Ultracom for Apple ios (2.X.X >) Printable user manual

Ultracom for Apple ios (2.X.X >) Printable user manual 30.8.2018 Ultracm fr Apple ios (2.X.X >) Printable user manual Table f cntents 1. General... 3 1.1 General inf... 3 1.2 Ultracm subscriptin and additinal services... 3 1.3 Operatr settings... 3 1.4 General

More information

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting Revisin Date: 12/31/2012 Table f Cntents 1. Institutin, Cre Facility and Lab Administratin Reprting Overview...2 2. Hw d I access ilab Reprts?...3 3. What is the General Functinality fr ilab Reprting?...6

More information

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE Cadence Virtus Schematic editing prvides a design envirnment cmprising tls t create schematics, symbls and run simulatins. This tutrial will

More information

ADS ECHO Qstart Quick Reference Guide. 340 The Bridge Street, Suite 204 Huntsville, Alabama (256)

ADS ECHO Qstart Quick Reference Guide. 340 The Bridge Street, Suite 204 Huntsville, Alabama (256) ADS ECHO Qstart Quick Reference Guide December 2016 QR 775033 A0 340 The Bridge Street, Suite 204 Huntsville, Alabama 35806 (256) 430-3366 www.adsenv.cm 2 ADS ECHO Qstart Quick Reference Guide 2016 ADS

More information

LED wdali MC Switch Input Modul Set - User Manual

LED wdali MC Switch Input Modul Set - User Manual LED wli MC Switch Input Mdul Set - User Manual Buttn mdul (Transmitter) 1. Prduct Descriptin Item N.: LC-004-302 Receive mdul (Receiver) The wli MC Switch Input Mdul Set is a cmpact wireless Multi Cntrl

More information

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions TC 60 prg start stp THERMOCOMPUTER TC 60 h C/h C Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing

More information

SeeGull CW Transmitter User Guide

SeeGull CW Transmitter User Guide SeeGull CW Transmitter User Guide Rev. E PCTEL 1 SeeGull CW Transmitter User Guide Dcument Number: 100103-00 Revisin E Octber 2018 Restrictins: This dcument cntains prprietary infrmatin that is prtected

More information

User Guide. ACC Mobile 3 Preview App for Android

User Guide. ACC Mobile 3 Preview App for Android User Guide ACC Mbile 3 Preview App fr Andrid 2017-2018, Avigiln Crpratin. All rights reserved. AVIGILON, the AVIGILON lg, AVIGILON CONTROL CENTER, ACC, and TRUSTED SECURITY SOLUTIONS are trademarks f Avigiln

More information

Operating Instructions

Operating Instructions TC 40 THERMOCOMPUTER TC 40 start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing the Prgramme

More information

Automatic Number Plate Recognition

Automatic Number Plate Recognition Release Ntes Autmatic Number Plate Recgnitin Versin 14.2.0 Release Ntes Revisin 0 This dcument describes new features and reslved issues fr Autmatic Number Plate Recgnitin 14.2.0. Yu can retrieve the latest

More information

Dry Contact Sensor DCS15 User Manual

Dry Contact Sensor DCS15 User Manual Dry Cntact Sensr DCS15 User Manual Help Versin updated till firmware 404i / SP456 Cpyright 2012, AKCess Pr C., Ltd.. Intrductin / What is a Dry Cntact Sensr The Dry Cntact sensr r DCS15 is a simple cnnectin

More information

SARMAP RELEASE NOTES. Version: 7.0 (July 2016) rpsgroup.com

SARMAP RELEASE NOTES. Version: 7.0 (July 2016) rpsgroup.com SARMAP RELEASE NOTES Versin: 7.0 (July 2016) 55 Village Square Dr. Suth Kingstwn, RI 02879 Tel: (401) 789-6224 Fax: (401) 789-1932 Email: MapSupprt@ Table f Cntents Table f Cntents...ii 1 Intrductin...

More information

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System VIP-200 Vide ver IP Extender and Matrix System Pint t Pint Extensin Cnfiguratin Quick Start Guide PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446 USA Cntents What is in the bx... 3 Transmitter kit

More information

Desktop Teller Exception User Guide

Desktop Teller Exception User Guide Desktp Teller Exceptin User Guide Jammed Dcuments If a dcument jams during the scanning prcess, the scanner will stp, and a message bx will display a Device Errr Message, as shwn belw: Click OK t allw

More information

Application for Drive Technology

Application for Drive Technology Applicatin fr Drive Technlgy MICROMASTER 4 Applicatin Descriptin Warranty, Liability and Supprt 1 Warranty, Liability and Supprt We d nt accept any liability fr the infrmatin cntained in this dcument.

More information

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements AccuBuild Versin 9.3 Release 05/11/2015 Dcument Management Speed Perfrmance Imprvements The entire dcument management system and security system design was retled which shuld result in majr speed imprvements

More information

KIP Cost Center User Guide

KIP Cost Center User Guide - 1 - KIP Cst Center User Guide Cntents 1 Intrductin... 3 1.1 Requirements:... 4 1.2 Supprted Operating Systems... 4 2 Installatin... 5 3 Setup... 8 4 KIP Cst Center Main Screen Print Mde... 12 4.1 Lading

More information

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE Dcument revisin 1.3 Last revised: December 6, 2017 Recn Wireless Blckage and Flw Mnitr Trubleshting Guide 2014-2017 Intelligent Agricultural Slutins All Rights Reserved. Recn Wireless

More information

RS232 Communication Between a Sunny Boy 2500U and a PC. Technical Note

RS232 Communication Between a Sunny Boy 2500U and a PC. Technical Note RS232 Cmmunicatin Between a Sunny By 2500U and a PC Technical Nte Revisin 1.5 July 8, 2003 Kent Sheldn Revisin Histry 1.5 July 8, 2003 Kent Sheldn Cntact update 20830 Red Dg Rad Grass Valley, CA 95945

More information

Frequency Response of a BJT CE Amplifier

Frequency Response of a BJT CE Amplifier Frequency Respnse f a BJT CE Amplifier Run the experiment By clicking the arrw n the Tlbar. Chse values f C B & C C, C E & R C frm the crrespnding drp dwn menus. (Clicking the arrw n the right side f the

More information

NanoDrop One/One C Printing

NanoDrop One/One C Printing MARK S100 INSTRUCTIONS NanDrp One/One C NanDrp One/One C Printing Fr use with versin 1.4 f lcal cntrl sftware All Therm Scientific NanDrp One/One C instruments with versin 1.4 f lcal cntrl sftware can

More information

CATA Composer R2016 Fact Sheet. Add a New Dimension to Your Product Communications

CATA Composer R2016 Fact Sheet. Add a New Dimension to Your Product Communications CATA Cmpser R2016 Fact Sheet Add a New Dimensin t Yur Prduct Cmmunicatins Versin 1.0-8/11/2015 Table f Cntents 1. CATIA Cmpser: VALUE AT A GLANCE... 3 2. CATIA Cmpser: Overview... 4 2.1. Immediate Prductivity

More information

Mobile LightSync Link App Programing Guide Revision 2

Mobile LightSync Link App Programing Guide Revision 2 Mbile LightSync Link App Prgraming Guide Revisin 2 Overview: The Mbile LightSync Link App emulates LightSync input devices used t cntrl ILC relays and dimmer utputs frm an Andrid r Apple mbile device.

More information

Troubleshooting Guide StarFire Satellite Changes

Troubleshooting Guide StarFire Satellite Changes Trubleshting Guide StarFire Satellite Changes This guide is updated t reflect the sftware frm NavCm which is related t the StarFire satellite and frequency changes. The mst recent versin f sftware fr bth

More information

Puget Sound Company Overview. Purpose of the Project. Solution Overview

Puget Sound Company Overview. Purpose of the Project. Solution Overview Puget Sund Cmpany Overview Puget Sund Energy is Washingtn State s largest and ldest energy utility, serving nearly 1 millin electric custmers and mre than 650,000 natural gas custmers, primarily within

More information

E-Jobsheet Tablet Application Functionality

E-Jobsheet Tablet Application Functionality E-Jbsheet Tablet Applicatin Functinality The e-jbsheet applicatin has been created fr Truck Service Prviders (TSP) in rder fr their admin staff and fitters t handle all types f wrk via a mbile platfrm

More information

Insert Picture, reduce the size of a Picture and Wrap text around a picture

Insert Picture, reduce the size of a Picture and Wrap text around a picture Insert Picture, reduce the size f a Picture and Wrap text arund a picture Yu can insert pictures frm different places, such as yur cmputer, an nline surce like Bing.cm, a webpage, r a scanned image. Insert

More information

Wonder Tree Video Slot Introduction. How to Bet. Gamble Feature

Wonder Tree Video Slot Introduction. How to Bet. Gamble Feature Wnder Tree Vide Slt Intrductin Wnder Tree vide slt is a 5-reel, 20-line game. The slt cnsists f 11 cards - 1 f which is Wild, and 1 is Scatter. All winning cmbinatins are paid left t right, except fr the

More information

Photoshop Elements 7 Intermediate: Layout & Design

Photoshop Elements 7 Intermediate: Layout & Design Phtshp Elements 7 Intermediate: Layut & Design Designing a prject... 2 Preparing pictures fr use in a prject... 2 Creating a new blank dcument... 2 Adding a picture(s) t a prject... 2 Turning n the Ruler/Grid...

More information

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start:

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start: Claim Amalgamatin Amalgamate means t jin 2 r mre cell claims int ne cell claim. Befre yu start: Yu will need t knw the title numbers f the cell titles fr amalgamatin. If yu are acting as an agent, yu must

More information

EPOCH 50 V4.70 GNSS Firmware

EPOCH 50 V4.70 GNSS Firmware 25 April 2013 EPOCH 50 V4.70 GNSS Firmware A new versin f EPOCH 50 GNSS firmware v4.70 has been released. This updated versin prvides the fllwing imprvements and fixes: New Antenna library versin 7.49

More information

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID:

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID: xtltipelement Service Infrmatin 2015 Chevrlet Crvette Crvette Service Manual 7527625 Bdy Systems Vehicle Access Repair Instructins Dcument ID: 3448513 Remte Cntrl Dr Lck and Theft Deterrent Transmitter

More information

NATF CIP Requirement R1 Guideline

NATF CIP Requirement R1 Guideline Open Distributin NATF CIP 014-2 Requirement R1 Guideline Disclaimer This dcument was created by the Nrth American Transmissin Frum (NATF) t facilitate industry wrk t imprve physical security. NATF reserves

More information

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo)

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo) Standard Operating Prcedure fr SEM3 (ThermFisher / FEI Apre) Befre beginning, ensure yu have an active reservatin fr SEM3 in CreResearch@Duke Lading a Sample: If Sample Exchange Windw is nt pen, click

More information

BV4115. RF Packet Transmitter. Product specification. February ByVac 2007 ByVac Page 1 of 5

BV4115. RF Packet Transmitter. Product specification. February ByVac 2007 ByVac Page 1 of 5 Prduct Specificatin Prduct specificatin. February 2007 ByVac 2007 ByVac Page 1 f 5 Prduct Specificatin Cntents 1. Dcument Versins... 2 2. Intrductin... 2 3. Features... 2 4. Battery Life... 2 5. Blck Diagram...

More information

PAPER SPACE AND LAYOUTS

PAPER SPACE AND LAYOUTS PAPER SPACE AND LAYOUTS There are tw distinct wrking envirnments in AutCAD namely: Mdel Space and Paper space. Prjects can be develped by either wrking in the mdel space thrugh the use f MVSETUP r PAPER

More information

SISTEMA ELEVATÓRIO ETV 460A

SISTEMA ELEVATÓRIO ETV 460A Parts included with yur Flat Lift Lift unit ( #1 ) Pwer supply ( #2 ) R.F. Mdule ( #3 ) Rcker switch ( #4 ) Remte Cntrl ( #5 ) Lift unit ( #1 ) Remte Cntrl ( #5 ) Pwer supply ( #2 ) Rcker switch ( #4 )

More information

Release Notes for Avaya Scopia PathFinder Firewall Traversal

Release Notes for Avaya Scopia PathFinder Firewall Traversal Release Ntes fr Avaya Scpia PathFinder Firewall Traversal Versin 8.3.7.0.4 Fr Slutin 8.3.7 January 2017 2000-2017 Avaya Inc. All intellectual prperty rights in this publicatin are wned by Avaya Inc. and

More information

Photoshop Elements: Color and Tonal Correction Basics

Photoshop Elements: Color and Tonal Correction Basics Phtshp Elements: Clr and Tnal Crrectin Basics Cntrast Lighten Phtshp Elements: Clr and Tnal Crrectin Basics 1 Sharpen Expsure Phtshp Elements: Clr and Tnal Crrectin Basics 2 Highlights and Shadws All key

More information

HP LF Printing Knowledge Center

HP LF Printing Knowledge Center HP LF Printing Knwledge Center Hw t print a banner/pster Applicatin: Micrsft Office 2003 Printer: HP Designjet Z6100 series Sftware: HP PS Driver Operating System: Windws 1. First recmmendatins: In rder

More information

Banner pocket v3 Page 1/7. Banner pocket v3

Banner pocket v3 Page 1/7. Banner pocket v3 Banner pcket v3 Page 1/7 Banner pcket v3 Descriptin Banner pcket will help yu get the printed sheets arranged in the way yu need fr attaching the frnt and back side pckets tgether. It will crp ne sides

More information

Spectracom GSG ecall Test Suite

Spectracom GSG ecall Test Suite 18-Dec-2017 GSG App Nte Spectracm GSG ecall Test Suite Table f Cntents 1. Intrductin... 1 2. Befre Starting the Test... 2 3. Running the ecall Test Suite... 4 4. Psitin Errr Tests 2.2.2-2.2.4... 10 5.

More information

RZ251W. Remote Sensing & Zoning Installation Guide. Quick Reference. Wireless Range

RZ251W. Remote Sensing & Zoning Installation Guide. Quick Reference. Wireless Range Remte Sensing & Zning Installatin Guide Pr Technlgies P.O. Bx 3377 Springfield, MO 65804 Tll ree : 888-776-47 Web: www.priaq.cm Hurs f Operatin: M- 9AM - 6PM Eastern Table f Cntents Table f Cntents Quick

More information

Hands-Free Music Tablet

Hands-Free Music Tablet Hands-Free Music Tablet Steven Tmer Nate Decker Grup Website: steve@wasatch.cm milamberftheassembly@yah.cm http://www.cs.utah.edu/~ndecker/ce3992/ Abstract The typical musician handles a great deal f sheet

More information

Creating Gift Card Batches

Creating Gift Card Batches Every active custmer gift card issued is a part f a batch f gift cards. Prir t activating any individual gift card, yu must define a batch f gift cards and any accmpanying rules that apply t each batch.

More information

C9 Trader Service User Guide

C9 Trader Service User Guide C9 Trader Service User Guide JUNE 2017 Cntents 1. Launching the C9 Trader... 2 2. Lgging in t Clud9... 2 3. Clud9 Hme Screen... 3 3.1 Cntrl Panel... 3 3.1.1 Hme Buttn... 3 3.1.2 Cmmunity Buttn... 3 3.1.3

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

100 Super Hot Video Slot Introduction. How to Bet. Gamble Feature

100 Super Hot Video Slot Introduction. How to Bet. Gamble Feature 100 Super Ht Vide Slt Intrductin 100 Super Ht vide slt is a 5-reel, 100-line fixed game. The slt cnsists f 8 cards - 1 f which is Wild, and 1 is Scatter. All winning cmbinatins are paid left t right, except

More information

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL Yu will learn the fllwing in this lab: The UNIVERSITY f NORTH CAROLINA at CHAPEL HILL Cmp 541 Digital Lgic and Cmputer Design Prf. Mntek Singh Fall 2016 Lab Prject (PART A): Attaching a Display t the Prcessr

More information

Ten-Tec Model RX-366 Subreceiver 565/566 Subreceiver Installation and Operation Manual-74467

Ten-Tec Model RX-366 Subreceiver 565/566 Subreceiver Installation and Operation Manual-74467 Ten-Tec Mdel RX-366 Subreceiver 565/566 Subreceiver Installatin and Operatin Manual-74467 Tls required: Sldering irn r heat gun (fr shrinking heat shrink tubing) Number 1 Phillips screw driver Number 2

More information

Dice High Video Slot. Introduction. How to Bet. Gamble Feature

Dice High Video Slot. Introduction. How to Bet. Gamble Feature Dice High Vide Slt Intrductin Hw t Bet Gamble Feature Game Cntrls Rules Dice Feature Jackpt Cards Bnus Game Interruptins Return t Player Intrductin Dice High vide slt is a 5-reel, 20-line fixed game. The

More information

OPERATING FEATURES & FUNCTIONS

OPERATING FEATURES & FUNCTIONS OPERATON T stp an peratin at any time Press and hld the Start Key until the cntrl beeps fr tw secnds, indicating the peratin has been cancelled. The ven will remain in a pwer-n state. T turn ven cntrl

More information

SINGER FUTURA TM Holiday Banner

SINGER FUTURA TM Holiday Banner SINGER FUTURA TM Hliday Banner Have fun decking the halls with this festive banner! It s s simple t make the HyperFnt sftware and yur SINGER FUTURA machine. Create the base applique right in yur embridery

More information

GANTOM iq AND iqx USER GUIDE

GANTOM iq AND iqx USER GUIDE GANTOM iq AND iqx USER GUIDE The Gantm iq is the wrld s smallest gb prjectr with zm and fcus fr prfessinal lighting applicatins. The Gantm iqx features the same amazing ptics f the Gantm iq but adds integrated

More information

Introduction to Life Cycle Risk Management Help Page

Introduction to Life Cycle Risk Management Help Page Select a frequently asked questin (FAQ) t skip t its answer. Hw is the curse rganized? Wh shuld take this curse? Hw d I get credit fr this curse? What d all the navigatin buttns d? Hw d I knw what t click?

More information

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold PwerCADDTM Tutrial 5/10/2018 Drawing by James Fleming and Matt Arnld Hw t Read This Dcument This manual is an interactive PDF that acts in sme ways like a bk and als like a prgram, with links that will

More information

MiLAB. Version. User Manual. Copyright 2016 Fourier Education

MiLAB. Version. User Manual. Copyright 2016 Fourier Education MiLAB Versin User Manual Cpyright 2016 Furier Educatin Table f Cntents Intrductin... 4 Installing the Sftware n an ios device... 4 Installing the Sftware n an Andrid device... 4 Multilingual MiLAB... 5

More information

Drawing Canvas Word 2007

Drawing Canvas Word 2007 Drawing Canvas Wrd 2007 This is nt an fficial training handut f the Educatinal Technlgy Center, Davis Schl District The Drawing Canvas... 2 Creating the Drawing Canvas... 2 Shapes... 2 Inserting a Shape...

More information

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E AIR CONDITER REMOTE CONTROLLER ILLUSTRAT CS406-R5E 00550905 0009 Thank yu very much fr purchasing ur air cnditiner. Please read this wner's manual carefully befre using yur air cnditiner. CONTENTS Handling

More information

Figure 1: A Battleship game by Pogo

Figure 1: A Battleship game by Pogo CSCI 2312-002: Object Oriented Prgramming Final Prject Assigned: Octber 17, 2017 Design Due: Octber 24, 2017 IN CLASS (Graded as ne hmewrk grade) Final prject Due: Nvember 16, 2017 at 11:59 PM Fr many

More information

Pro Audio White Space Finder

Pro Audio White Space Finder Pr Audi White Space Finder 1 / 48 Intrductin Welcme t Pr Audi White Space Finder (PAWS4400) -- a new, PC-based RF spectrum analyzer specifically designed fr the prfessinal wireless audi and vide industries.

More information

SVT Tab and Service Visibility Tool Job Aid

SVT Tab and Service Visibility Tool Job Aid Summary This Jb Aid cvers: SVT Tab Overview Service Visibility Tl (SVT) Area Overview SVT Area: Satellite Mdem Status (Frm Mdem) Clumn SVT Area: Satellite Mdem Status (Frm SMTS) Clumn SVT Area: Prvisining

More information

You Be The Chemist Challenge Official Competition Format

You Be The Chemist Challenge Official Competition Format 2018-2019 Yu Be The Chemist Challenge Official Cmpetitin Frmat This dcument prvides detailed infrmatin regarding the Challenge frmat at each level f the cmpetitin. Schl Crdinatrs, participants, and parents/guardians

More information

IDEXX VetConnect PLUS on the Patient Clipboard displays the latest laboratory results for the current patient:

IDEXX VetConnect PLUS on the Patient Clipboard displays the latest laboratory results for the current patient: Crnerstne* 8.5 NEXT Sftware Release Ntes Befre yu upgrade Cmputer requirements Please check yur cmputer specificatins t get the mst ut f this release. Fr wrkstatins and peer-t-peer servers, we recmmend

More information

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version PaperStream IP (TWAIN x64) fr SP Series change histry Service Update 7 Versin 1.46.0.5900 Crrected issue: 1. Minr errrs have been mdified. Versin 1.46.0.5775 New feature: 1. SP-1425 is newly supprted.

More information

Introduction. Version 8.2.2

Introduction. Version 8.2.2 Intrductin As with each new versin, minr changes and new ptins are added. Sme f these changes are nt visible because they are designed t imprve functins and crrect sme minr bug. Fr visible changes, please

More information

KELOX room thermostats - KM690D Digital-Standard/ KM690U Digital-Control

KELOX room thermostats - KM690D Digital-Standard/ KM690U Digital-Control KELOX rm thermstats - KM690D Digital-Standard/ KM690U Digital-Cntrl The KELOX rm thermstats are high-quality rm temperature cntrllers fr recrding and cntrlling the required rm temperature fr a maximum

More information

Batman & The Penguin Prize

Batman & The Penguin Prize Batman & The Penguin Prize The bjective f Batman & The Penguin Prize is t btain winning symbl cmbinatins by spinning the reels. TO PLAY THE GAME The Batman & The Penguin Prize game can be played in bth

More information

Tension meter dynaline HF45/LPT

Tension meter dynaline HF45/LPT Tensin meter dynaline HF45/LPT EN Operatin and maintenance manual SUMMARY 1. DEFINITIONS... 3 2. PICTOGRAMS USED IN THIS MANUAL... 3 3. STANDARD CONTENT OF DELIVERY... 3 4. INTRODUCTION... 4 4.1. Descriptin...

More information

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons. 2-gang Art. N. : HS2 RF 4-gang Art. N. : HS4 RF Operating instructins 1 Safety instructins Electrical devices may nly be munted and cnnected by electrically skilled persns. Serius injuries, fire r prperty

More information

Dry Contact Sensor

Dry Contact Sensor www.akcp.cm Dry Cntact Sensr Intrductin The Dry Cntact sensr is a simple cnnectin t burglar alarms, fire alarms r any applicatin that requires mnitring by the unit. Dry cntact sensrs are user definable

More information

Oracle s Hyperion Financial Data Quality Management. Readme. Release

Oracle s Hyperion Financial Data Quality Management. Readme. Release Oracle s Hyperin Financial Data Quality Management Release 9.3.3.0.00 Readme T view the mst recent versin f this Readme, see the 9.3.x dcumentatin library n Oracle Technlgy Netwrk (OTN) at http://www.racle.cm/technlgy/dcumentatin/epm.html.

More information

Ethernet Gateway User Manual

Ethernet Gateway User Manual Summer 17 Ethernet Gateway Table f Cntents INTRODUCTION 3 AT A GLANCE 4 ETHERNET GATEWAY SETUP VIA DHCP 5 JACKS, BUTTONS, AND PORTS 6 TROUBLESHOOTING THE ETHERNET GATEWAY 7 LED INDICATOR LIGHTS 7 NO READINGS

More information

4 wires. AUDIO & VIDEO TERMINALS for TL door phone systems User manual. Audio. 7" Videoadvanced. 7" Video

4 wires. AUDIO & VIDEO TERMINALS for TL door phone systems User manual. Audio. 7 Videoadvanced. 7 Video 4 wires Audi AUDIO & VIDEO TERMINALS fr TL dr phne systems User manual 3.5" Vide 7" Vide 7" Videadvanced 0 Cntents 1 Safety instructins 2 Descriptin f the audi-vide terminals 3 Functins f the audi-vide

More information

LED DALI MC+ Switch Input Module - User Manual

LED DALI MC+ Switch Input Module - User Manual LED MC+ Switch Input Mdule - User Manual Item n.: LC-004-301 1. Prduct Descriptin The MC+ is a Cmpact Multi Cntrl mdule with 4 freely prgramable swithcing inputs (ptential-free clsing cntacts). The supply

More information