Operating Instructions
|
|
- Samuel Harmon
- 5 years ago
- Views:
Transcription
1 TC 40 THERMOCOMPUTER TC 40 start stp Operating Instructins
2 Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing the Prgramme Values...3 Further Hints Reactin n Pwer Breadwn...3 Maximum Values...3 Errr Messages...4 Setting the Parameters...5 Technical Infrmatin...6 Cntrller Layut 1 2 THERMOCOMPUTER TC 40 1 display 2 firing curve with indicatrs 3 ey fr selecting the segment f the firing curve 4 ey fr increasing the displayed value 5 start/stp ey 3 4 start stp ey fr decreasing the displayed value 7 mains switch 7 8
3 General Infrmatin Yur brand new bentrup TC40 represents ne f the mst ppular iln cntrllers f the cmpact class. The TC40 cmbines very easy handling, safe and precise iln peratin at a very reasnable price. Befre perating the TC40, please read and understand the manual carefully. This familiarizes yu with all functins f the TC40 quicly and ensures that yu can use all the capablities f yur cntrl. Security Advice Please refer t the security advice f the iln manufacturer. Mae sure that the cntrl is munted at a safe distance frm the iln and that the cntrl is nt expsed t direct heat r radiatin when the iln is pened whilst it is ht. Firing Curves The micrprcessr cntrller TC40 prvides yur iln with a precise and reprducable cntrlling unit. The firing curse is shwn as a firing curve cnsisting f five segments. An example is shwn belw. This firing curve cnsists f the fllwing sements: [ C] a. heating up t 580 C at 120 C per hur b. heating up t 900 C at maximum pwer c. dwell (30 minutes) d. natural cling (a) (b) (c) (d) [min] Fr easier use, the TC40 has fixed values in the firing curve: The rate f heating up can be set t the values 60 C/h, 120 C/h, 240 C, 360 C/h, 480 C/h and maximum pwer. The temperature fr switching t maximum pwer is fixed at 580 C. The final temperature can be adjusted between 400 C and 1320 C in 5 C steps. The dwell can be selected 0, 10, 20, 30, 60 minutes. 9
4 Typical Firing Curves Depending n applicatin, clay, glaze etc. it required very different firing curves. Yur dealer will assist yu fr detailed questins. Fllwing firing curves are sme typical examples: Firing heatup( C/h) final temp. ( C) dwell biscuit 800 C biscuit 900 C glaze 1050 C stneware 1180 C stneware1250 C Entering a Firing Curve Example: The biscuit firing 800 C (refer t table shwn abve) is entered as a firing curve as fllws: resp. resp. resp. Pwer n the cntrller by the mains switch. After a few secnds the actual iln temperature appears n the display (1). Press the ey (3) nce. The sectin (a) f the firing curve (2) lights up. The display (1) shws the actual rate fr the heat up. Use the eys (4) and (6) t change this value t 120 C/h (as ur example). Press the ey (3) again t select the next segment (b). Use the eys (4) and (6) t enter the requred final temperature f the firing (800 C as ur example). If yu hld the ey (4) r (6) pressed, the displayed value will run thrugh autmatically. Press the ey (3) t step t the next segment f the curve (sectin c.). Adjust the dwell t the required value (e.g. 10 minutes). Instead f a linear heat up (sectin a.) yu can als enter an uncntrlled heat up, ie. with maximum pwer. This is dne by setting the firing curve t SKIP in the sectin a. The value SKIP is shwn as depicted left. 10
5 If yu want t change a value again r yu have sipped a segment unintentinally, use the ey (3) t get bac t the beginning f the firing curve. Yu can alter all values as ften as yu lie. start stp T start the firing, press the ey (5). The display (1) shws frm nw n always the iln temperature. Additinally, the firing curve (2) indicates the current sectin f the firing. The flashing decimal pint in the right hand crner indicates prgramme running. Checing the Prgramme Values T chec r change the values f a prgramme when the firing has already been started, prceed as fllws: Press the ey (3), the firing is interrupted autmatically (decimal pint stps flashing). Nw, yu can step thrugh the segments using the ey (3) as described befre. T change a value, use eys (4) and (6). T cntinue the firing with the new values press ey (5) again. Reactin n Pwer Breadwn Fr security reasns the firing will be interrupted if a pwer breadwn ccurs. Fr special applicatins a versin with pwer breadwn restart feature is available n request. Maximum Adjustable Values heat up...60 C t 480 C/h, SKIP end f heat up C (fix, cnfigurable) final temperature C t 1320 C* dwell t 1.00 hurs * this value varies depending n the iln 11
6 Errr Messages The integrated micrprcessr inside yur TC60 perfrms cntinus checing f the firing prcess. In case f any malfunctin the display will shw an errr message pinting t the prblem. Fllwing is a descriptin f the pssible errr messages: The iln desn t fllw the required temperature increase. This errr message pints clearly t a iln prblem. Pssible cause: bren fuse, pwer phase r relay failed the dr (lid) cntact is pen a heating element is bren the heating elements are t ld (esp.with high firing temperatures) the thermcuple has a shrt circuit Thermcuple r thermcuple circuit defect Pssible cause: thermcuple bren thermcuple wiring bad cntacts f the cnnecting plug bad Impssible values n data acquisitin Pssible cause: thermcuple plarized bad thermcuple temperature less than -15 C Safety Switch Off features was activated The TC60 has measured an vertemperature in the iln and switched ff the iln by the 2nd pwer relay (if fitted). Chec carefully the cause befre using the iln again t avid further damage! As yur dealer fr assistance. 12
7 Errr detected during pwer-up self chec On every pwer-up the cntrller perfrms a self chec. If an errr is detected the cntrller shws F8 (ROM errr) r F9 (hardware errr). Please cntact yur lcal dealer. Setting the Parameters f the TC40 This infrmatin describes hw t adapt the TC40 t the iln. Usually, this is dne by the iln manufacturer. Yu can call up the parameters t view nly; t change them, yu need a special authrizatin cde which is available frm us n request. T get int the parameter menu press the ey start/stp and hld it pressed fr abut 4 secnds. Nw, the display reads the first cnfigurable value and yu can step thrugh the list by pressing the ey (3). cde usage value range unit 0 type f thermcuple S-R-K-J max. adjustable temperature C 2 prprtinal band % 3 integral time s 4 derivative time s 5 cyclus time pwer relay s 6 units fr temperatures C - F lc errr message F1 (heat up chec) temp. fr switching ver t full pwer C 13
8 Technical Infrmatins Schematic f a Kiln (a) (b) pwer relay (heating) (c) (d) (e)* prtectin grund mains supply live e.g. 2nd pwer relay (ptinal) (f) mains supply neurtral (g) (+) thermcuple (h,n) (-) a... n: electrical lins fr the cntrller Pin Assignment HAN 7 D HAN 15 D CPC c b a cnnect. functin HAN7D HAN15D CPC14 a additinal cntrl utput (live) 7 C3 12 b cntrl utput pwer relay (live) 6 A3 14 c cntrl utput pwer relays (neutral) 1 B3 13 d prtectin earth * PE clamp 11 e mains supply live 5 A1 8 f mains supply neutral 2 B1 9 g thermcuple + 3 B5 1 h thermcuple - (type S, R) 4 C5 2 n thermcuple - (type K, J) 4 A5 3 * prtectin earth shuld be cnnected! Imprtant Nte Please cmpare type f thermcuple used in the iln with the cntrllers thermcuple input mared n the bac f the cntrller. Mismatch can cause severe damage f iln and cntents 14 We reserve the right t mae any changes withut ntice Operating Instructins TC40 V3.2 (C)pyright 1998 bentrup Industrial Cntrls, D Fernwald
TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions
TC 60 prg start stp THERMOCOMPUTER TC 60 h C/h C Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing
More informationOperating Instructions
TC 60/8 THERMOCOMPUTER TC 60/8 temp / time s s temp / time k start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing
More informationOperating Instructions
TC 405 fix prog pers prog 0 memo t 0 C/h 7 8 9 4 5 6 1 2 event kw/h k THERMOCOMPUTER TC 405 tmp 1 t1 t 2 tmp 2 3 start stop k C/h C/h k 1050 C 1180 C 1250 C 150 C 800 C 900 C Operating Instructions Brief
More informationTC 405/30 THERMOCOMPUTER TC 405/30. temp rate. time. rate. temp time. fix prog. memo. pers. Operating Instructions. event kw/h.
TC 405/30 fix prog pers prog 0 memo THERMOCOMPUTER TC 405/30 7 8 9 4 5 6 1 rate temp rate o k temp time 2 event kw/h time 3 start stop Operating Instructions Brief Instructions To - start a fixed programme
More informationidcv Isolated Digital Voltmeter User Manual
www.akcp.cm idcv Islated Digital Vltmeter User Manual Help Versin updated till firmware SP446 Cpyright 2011, AKCess Pr Limited Prvided by fficial AKCP-Distributr Didactum https://www.didactum-security.cm/en/
More informationINSTALLATION INSTRUCTIONS
Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke
More informationDry Contact Sensor
www.akcp.cm Dry Cntact Sensr Intrductin The Dry Cntact sensr is a simple cnnectin t burglar alarms, fire alarms r any applicatin that requires mnitring by the unit. Dry cntact sensrs are user definable
More informationUpgrading to PlanetPress Suite Version 5
Upgrading t PlanetPress Suite Versin 5 Creatin date: September 2, 2005 Revisin date: June 14, 2006 Table f Cntents System Requirements... 4 Imprtant Cnsideratins... 4 Knwn Issues... 6 Prcedure t imprt
More informationAIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E
AIR CONDITER REMOTE CONTROLLER ILLUSTRAT CS406-R5E 00550905 0009 Thank yu very much fr purchasing ur air cnditiner. Please read this wner's manual carefully befre using yur air cnditiner. CONTENTS Handling
More informationLab 1 Load Cell Measurement System (Jan 09/10)
BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System (Jan 09/10) 1) Test the lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b.
More informationA Geno Technology, Inc. (USA) brand name. Orbital Shaker. Cat. No. BT909, BT926, BT
A Gen Technlgy, Inc. (USA) brand name Orbital Shaker Cat. N. BT909, BT926, BT927 1-800-628-7730 1-314-991-6034 inf@btlabsystems.cm Thanks fr chsing BT Lab Systems BT909 Orbital Shaker. This peratin manual
More informationThe WHO e-atlas of disaster risk for the European Region Instructions for use
The WHO e-atlas f disaster risk fr the Eurpean Regin Instructins fr use 1 Last Update: June 2011 Cntents 1. Basic system requirements... 3 2. Structure f the WHO e-atlas... 4 2.1. Main menu... 4 2.1.1.
More informationThe UNIVERSITY of NORTH CAROLINA at CHAPEL HILL
Yu will learn the fllwing in this lab: The UNIVERSITY f NORTH CAROLINA at CHAPEL HILL Cmp 541 Digital Lgic and Cmputer Design Prf. Mntek Singh Fall 2016 Lab Prject (PART A): Attaching a Display t the Prcessr
More information.,Plc..d,~t l~ucjio PA300 DIGITAL BASS PROCESSOR USER'S MANUAL. 2 Why use the DIGITAL BASS PROCESSOR? 2 About the PWM Subsonic Filter
.,Plc..d,~t l~ucji PA300 DIGITAL BASS PROCESSOR Cngratulatins n yur purchase f a Planet Audi signal prcessr. It has been designed, engineered and manufactured t bring yu the highest level f perfrmance
More informationINSTALLATION INSTRUCTIONS
Lad with min. 5 kg 405000090 405070090 INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main dimensins. 3. Parts included. 4. Installatin. 5. Adjusting the strke
More informationProcessors with Sub-Microsecond Response Times Control a Variety of I/O. *Adapted from PID Control with ADwin, by Doug Rathburn, Keithley Instruments
PID Cntrl with ADwin Prcessrs with Sub-Micrsecnd Respnse Times Cntrl a Variety f I/O CHESTERLAND OH March 9, 2015 *Adapted frm PID Cntrl with ADwin, by Dug Rathburn, Keithley Instruments By Terry Nagy,
More informationVIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System
VIP-200 Vide ver IP Extender and Matrix System Pint t Pint Extensin Cnfiguratin Quick Start Guide PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446 USA Cntents What is in the bx... 3 Transmitter kit
More informationCAR ASYST - Quick Start Guide MAIN MENU
fficially apprved by CAR ASYST - Quick Start Guide MAIN MENU Main menu The main menu f ur CAR ASYST APP is divided int 7 menu items. Belw yu will find a list f these items including a shrt descriptin.
More informationLED wdali MC Switch Input Modul Set - User Manual
LED wli MC Switch Input Mdul Set - User Manual Buttn mdul (Transmitter) 1. Prduct Descriptin Item N.: LC-004-302 Receive mdul (Receiver) The wli MC Switch Input Mdul Set is a cmpact wireless Multi Cntrl
More informationRiverSurveyor S5/M9 & HydroSurveyor Second Generation Power & Communications Module (PCM) Jan 23, 2014
SnTek, a Xylem brand 9940 Summers Ridge Rad, San Dieg, CA 92121-3091 USA Telephne (858) 546-8327 Fax (858) 546-8150 E-mail: inquiry@sntek.cm Internet: http://www.sntek.cm RiverSurveyr S5/M9 & HydrSurveyr
More informationLab 1 Load Cell Measurement System
BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System 1) Build and test a lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b. Cmpute
More informationAltis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1
Altis Flight Manager PC applicatin fr AerbTec devices AerbTec Altis v3 User Manual 1 Table f Cntents Intrductin...3 Requirements...3 Installatin...3 Applicatin...3 USB Driver fr Altis v3 interface ALink...4.NET
More informationSolarEdge Built-in Revenue Grade Meter Troubleshooting
SlarEdge Built-in Revenue Grade Meter Trubleshting Versin 1.0 Cntents Trubleshting Meter Cnnectin 3 Cmmunicatin Status Screen Trubleshting 3 Device Type and Prtcl are cnfigured incrrectly 3 Number f devices
More informationSISTEMA ELEVATÓRIO ETV 460A
Parts included with yur Flat Lift Lift unit ( #1 ) Pwer supply ( #2 ) R.F. Mdule ( #3 ) Rcker switch ( #4 ) Remte Cntrl ( #5 ) Lift unit ( #1 ) Remte Cntrl ( #5 ) Pwer supply ( #2 ) Rcker switch ( #4 )
More informationElectrical devices may only be mounted and connected by electrically skilled persons.
Order N. : 5323 02 Operating instructins 1 Safety instructins Electrical devices may nly be munted and cnnected by electrically skilled persns. Serius injuries, fire r prperty damage pssible. Please read
More informationDry Contact Sensor DCS15 User Manual
Dry Cntact Sensr DCS15 User Manual Help Versin updated till firmware 404i / SP456 Cpyright 2012, AKCess Pr C., Ltd.. Intrductin / What is a Dry Cntact Sensr The Dry Cntact sensr r DCS15 is a simple cnnectin
More informationHow to Install a Slate Tile Floor By See Jane Drill TM Copyright 2014, All Rights Reserved
Hw t Install a Slate Tile Flr By See Jane Drill TM Cpyright 2014, All Rights Reserved Resurces Needed t Cmplete the Jb Tls & Supplies Pwer drill with mixing want (a bucket trwel can als be used fr mixing)
More informationSecurity Exercise 12
Security Exercise 12 Asynchrnus Serial Digital Baseband Transmissin Discussin: In this chapter, yu learned that bits are transmitted ver a cpper wire as a series f vltage pulses (a prcess referred t as
More informationmarksolid How to use marksolid for metal marking Spray 114 and Paste 015 V1.0
markslid Hw t use markslid fr metal marking Spray 114 and Paste 015 V1.0 1. Cntent 1. Cntent... 2 1. What is explained?... 3 Using markslid n plished metal (stainless steel)... 3 Imprtant things t knw...
More informationTable of Contents. ilab Solutions: Core Facilities Core Usage Reporting
Revisin Date: 12/31/2012 Table f Cntents 1. Institutin, Cre Facility and Lab Administratin Reprting Overview...2 2. Hw d I access ilab Reprts?...3 3. What is the General Functinality fr ilab Reprting?...6
More informationDXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732
Prgram Infrmatin 1 DXF2DAT 3.0 Prfessinal Designed Cmputing Systems 848 W. Brtn Rad Essexville, Michigan 48732 Cntact: (989) 892-4376 website: http://www.famwrk.net General Infrmatin: inf@famwrk.net Technical
More informationDesktop Teller Exception User Guide
Desktp Teller Exceptin User Guide Jammed Dcuments If a dcument jams during the scanning prcess, the scanner will stp, and a message bx will display a Device Errr Message, as shwn belw: Click OK t allw
More informationINSTALLATION INSTRUCTIONS
Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke
More informationProcess Gain and Loop Gain
Prcess Gain and Lp Gain By nw, it is evident that ne can calculate the sensitivity fr each cmpnent in a cntrlled prcess. Smetimes, this sensitivity is referred t as a gain. The cnfusin is understandable
More informationRZ251W. Remote Sensing & Zoning Installation Guide. Quick Reference. Wireless Range
Remte Sensing & Zning Installatin Guide Pr Technlgies P.O. Bx 3377 Springfield, MO 65804 Tll ree : 888-776-47 Web: www.priaq.cm Hurs f Operatin: M- 9AM - 6PM Eastern Table f Cntents Table f Cntents Quick
More informationDry Contact Sensor. Communications cable - RJ-45 jack to sensor using UTP Cat 5 wire. Power source: powered by the unit. No additional power needed.
Intrductin Dry Cntact Sensr The Dry Cntact sensr is a simple cnnectin t burglar alarms, fire alarms r any applicatin that requires mnitring by the unit. Dry cntact sensrs are user definable and can be
More informationSolarEdge. Immersion Heater Controller Installation Guide. For Europe, APAC & South Africa Version 1.6
SlarEdge Immersin Heater Cntrller Installatin Guide Fr Eurpe, APAC & Suth Africa Versin 1.6 Cntents Cntents HANDLING AND SAFETY INSTRUCTIONS 2 Safety Symbls Infrmatin 2 Immersin Heater Cntrller Installatin
More informationTroubleshooting Guide StarFire Satellite Changes
Trubleshting Guide StarFire Satellite Changes This guide is updated t reflect the sftware frm NavCm which is related t the StarFire satellite and frequency changes. The mst recent versin f sftware fr bth
More informationMaxon Motor & Motor Controller Manual
Maxn Mtr & Mtr Cntrller Manual Nte: This manual is nly fr use fr the Maxn mtr and cntrller utlined belw. This infrmatin is based upn the tutrial vides fund nline and thrugh testing. NOTE: Maximum Permitted
More informationApplication for Drive Technology
Applicatin fr Drive Technlgy MICROMASTER 4 Applicatin Descriptin Warranty, Liability and Supprt 1 Warranty, Liability and Supprt We d nt accept any liability fr the infrmatin cntained in this dcument.
More informationThis app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server.
Autmatic impsitin Page 1/8 Autmatic impsitin Descriptin Autmatic impsitin will d the mst cmmn impsitins fr yur digital printer. It will autmatically d flders fr A5, A4 r US Letter page sizes in either
More informationOwner s Manual Installation and Operating Instructions
Meitav-tec Ltd (Cntel grup) Tel: +972 (3) 962 6462 Fax: +972 (3) 962 6620 www.meitavtec.cm - supprt@meitavtec.cm ETN-24-P-1S Owner s Manual Installatin and Operating Instructins Please read this manual
More informationSet up and use your Beats X earphones
Set up and use yur Beats X earphnes Here's everything yu need t knw t make the mst f yur Beats X earphnes. Turn n The pwer buttn is n the cable beneath the right earphne. Press and hld the buttn fr 1 secnd
More informationLINE POWER SUPPLIES Low-Loss Supplies for Line Powered EnOcean Modules
Lw-Lss Supplies fr Line Pwered EnOcean Mdules A line pwer supply has t ffer the required energy t supply the actuatr electrnic and t supply the EnOcean TCM/RCM radi cntrl mdule. This paper cntains sme
More informationIntesisBox IS-IR-KNX-1i v1.0. User's Manual Issue Date: 06/2017 r1.0 eng
IntesisBx IS-IR-KNX-1i v1.0 User's Manual Issue Date: 06/2017 r1.0 eng IntesisBx KNX IR Universal AC Intesis Sftware S.L.U. 2017 All Rights Reserved. Infrmatin in this dcument is subject t change withut
More informationOPERATING FEATURES & FUNCTIONS
OPERATON T stp an peratin at any time Press and hld the Start Key until the cntrl beeps fr tw secnds, indicating the peratin has been cancelled. The ven will remain in a pwer-n state. T turn ven cntrl
More informationKELOX room thermostats - KM690D Digital-Standard/ KM690U Digital-Control
KELOX rm thermstats - KM690D Digital-Standard/ KM690U Digital-Cntrl The KELOX rm thermstats are high-quality rm temperature cntrllers fr recrding and cntrlling the required rm temperature fr a maximum
More informationFrequency Response of a BJT CE Amplifier
Frequency Respnse f a BJT CE Amplifier Run the experiment By clicking the arrw n the Tlbar. Chse values f C B & C C, C E & R C frm the crrespnding drp dwn menus. (Clicking the arrw n the right side f the
More informationBV4115. RF Packet Transmitter. Product specification. February ByVac 2007 ByVac Page 1 of 5
Prduct Specificatin Prduct specificatin. February 2007 ByVac 2007 ByVac Page 1 f 5 Prduct Specificatin Cntents 1. Dcument Versins... 2 2. Intrductin... 2 3. Features... 2 4. Battery Life... 2 5. Blck Diagram...
More information2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID:
xtltipelement Service Infrmatin 2015 Chevrlet Crvette Crvette Service Manual 7527625 Bdy Systems Vehicle Access Repair Instructins Dcument ID: 3448513 Remte Cntrl Dr Lck and Theft Deterrent Transmitter
More informationUniversal input/output controller
Embedded autmatin equipment (Shanghai) Limited Rm 305. Twer B.NO.18Talin rad Pudng District, Shanghai Phne: +86-21-51090839/50750355, fax: +86-21-50758598, e-mail: sales@stammkn.cm Universal input/utput
More informationTen-Tec Model RX-366 Subreceiver 565/566 Subreceiver Installation and Operation Manual-74467
Ten-Tec Mdel RX-366 Subreceiver 565/566 Subreceiver Installatin and Operatin Manual-74467 Tls required: Sldering irn r heat gun (fr shrinking heat shrink tubing) Number 1 Phillips screw driver Number 2
More informationCreating HyperLynx DDRx Memory Controller Timing Model
Creating HyperLynx DDRx Memry Cntrller Timing Mdel AppNte 10706 A P P N T E S SM Creating HyperLynx DDRx Memry Cntrller Timing Mdel By: Min Maung Last Mdified: April 30, 2009 1.0 ntrductin The DRAM and
More informationBanner pocket v3 Page 1/7. Banner pocket v3
Banner pcket v3 Page 1/7 Banner pcket v3 Descriptin Banner pcket will help yu get the printed sheets arranged in the way yu need fr attaching the frnt and back side pckets tgether. It will crp ne sides
More informationMartel LC-110H Loop Calibrator and HART Communications/Diagnostics
Martel LC-110H Lp Calibratr and HART Cmmunicatins/Diagnstics Abstract Martel Electrnics Crpratin This white paper describes the basic functins f HART cmmunicatins and the diagnstic capability f the Martel
More informationPRODUCT SAFETY ALERT
Allen-Bradley Mtr Prtectin Circuit Breakers 140M-C2E and 140M-C2T, Series A and B 140M-D8E and 140M-D8T, Series A and B 140M-F8E and 140M-F8T, Series A, B and C Starters that use Allen-Bradley Mtr Prtectin
More informationDispatcher Control for MotoTRBO Capacity Plus Systems
Dispatcher Cntrl fr MtTRBO Capacity Plus Systems This tutrial prvides brief instructins t set up the dispatch cntrl ver MtTRBO Capacity Plus systems, using SmartPTT dispatch sftware. Bth cases are cnsidered:
More informationRemote Control Learn Button Receiver Input Connections
Remte Cntrl Learn Buttn Receiver Input Cnnectins Remte Cntrl LED Light Wi-fi/Factry Reset Buttn Receiver Output Cnnectin Heartbeat LED Light PRV Cnnectins Pwer Reset Buttn Pl / Treadmill Switch Flat Switch
More informationELECTRICAL CIRCUITS LABORATORY II EEE 209 EXPERIMENT-6. Operational Amplifiers II
ADANA SCIENCE AND TECHNOLOGY UNIVERSITY ELECTRICAL ELECTRONICS ENGINEERING DEPARTMENT ELECTRICAL CIRCUITS LABORATORY II EEE 209 EXPERIMENT-6 Operatinal Amplifiers II OPERATIONAL AMPLIFIERS Objectives The
More information1.12 Equipment Manager
Mdule 1 Categry 1 1.12 Equipment Manager Functin f the windw The windw is the central data file fr the Kntrl Pr and cllects the main data fr fees f an bject that t be used in this prject. The Equipment
More informationECE 3829: Advanced Digital System Design with FPGAs A Term 2017
ECE 3829: Advanced Digital System Design with FPGAs A Term 2017 Lab 2- VGA display and Light Sensr interface Reprt due at start f class Friday September 15 th Use the prvided Ambient Light Sensr mdule
More informationPhotoVu Digital Picture Frame Service & Repair Guide
PhtVu Digital Picture Frame Service & Repair Guide PhtVu, LLC 2450 Central Ave, #G1 Bulder, CO 80301 USA www.phtvu.cm/supprt Versin: 1.0 Table f Cntents Getting Started... 3 Determine Yur Generatin f PhtVu
More informationDocumentation of the PIC32 Pin Finder
App. Versin: 1.1.1.120 Dcument Versin: 1.0 Dcument Create date: 2009-10-16 Dcument Update: 2009-10-19 22:37 Authr: B Gärdmark Cmpany: Spectrn System Develpment AB WEB: www.spectrn.us Cpyright 2009 All
More informationSpectracom GSG ecall Test Suite
18-Dec-2017 GSG App Nte Spectracm GSG ecall Test Suite Table f Cntents 1. Intrductin... 1 2. Befre Starting the Test... 2 3. Running the ecall Test Suite... 4 4. Psitin Errr Tests 2.2.2-2.2.4... 10 5.
More informationIntesisBox PA-RC-KNX-1i v1.2
IntesisBx PA-RC-KNX-1i v1.2 User's Manual Issue Date: 08/2015 r1.2 eng IntesisBx KNX Panasnic AC (FS / FSM) Intesis Sftware S.L. 2015 All Rights Reserved. Infrmatin in this dcument is subject t change
More informationELEC 7250 VLSI TESTING. Term Paper. Analog Test Bus Standard
ELEC 7250 VLSI TESTING Term Paper On Analg Test Bus Standard Muthubalaji Ramkumar 1 Analg Test Bus Standard Muthubalaji Ramkumar Dept. f Electrical and Cmputer Engineering Auburn University Abstract This
More informationSuper ABC Plug-in kit for Pacman or Ms Pacman
Super ABC Plug-in kit fr Pacman r Ms Pacman This page is a technical reference fr thse wh wn the SUPER ABC kit manufactured by Tw Bit Scre during the 1990's. This prduct is n lnger available. Under the
More informationBig Kahuna Assembly Instructions
Big Kahuna Assembly Instructins Thank yu fr purchasing a d-it-yurself pergla kit frm Average Je s Pergla Dept. We appreciate yur business, and we are here t help yu in any way pssible. Read this entire
More informationGRFX 1801: Game Development for Platforms
GRFX 1801: Game Develpment fr Platfrms Instructr Camern Buckley Email cbuckley@astate.edu Office Lcatin Fine Arts Center 123 Office Hurs Friday 10a 1p Curse Overview Intermediate and advanced techniques
More informationGANTOM iq AND iqx USER GUIDE
GANTOM iq AND iqx USER GUIDE The Gantm iq is the wrld s smallest gb prjectr with zm and fcus fr prfessinal lighting applicatins. The Gantm iqx features the same amazing ptics f the Gantm iq but adds integrated
More informationService Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version
PaperStream IP (TWAIN x64) fr SP Series change histry Service Update 7 Versin 1.46.0.5900 Crrected issue: 1. Minr errrs have been mdified. Versin 1.46.0.5775 New feature: 1. SP-1425 is newly supprted.
More informationExperiment 7 Digital Logic Devices and the 555-Timer
Experiment 7 Digital Lgic Devices and the 555-Timer Purpse: In this experiment we address the cncepts f digital electrnics and lk at the 555-timer, a device that uses digital devices and ther electrnic
More informationIntesisBox TO-RC-KNX-1i v1.3
IntesisBx TO-RC-KNX-1i v1.3 User's Manual Issue Date: 12/2015 r1.2 eng IntesisBx KNX Tshiba AC Digital Inverter & VRF lines Intesis Sftware S.L. 2015 All Rights Reserved. Infrmatin in this dcument is subject
More informationRF MONO 8.2MHz RF MONO HIGH FREQUENCY PCB CONNECTION. Please see the last section in this document. FOREWARDS
RF MONO 8.2MHz PCB CONNECTION Please see the last sectin in this dcument. FOREWARDS This user guide cntains basic infrmatin n hw t adjust ur RF Mn Antenna System SP82 and btain its best perfrmance pssible.
More informationUsing the Laser Cutter
Using the Laser Cutter Prerequisites Befre yu will be allwed t use the laser cutter, yu must cmplete these three steps: 1. Yu must have cmpleted the Laser Cutter training at Cyberia 2. Yu must schedule
More informationAcceptance and verification PCI tests according to MIL-STD
Acceptance and verificatin PCI tests accrding t MIL-STD-188-125 Bertrand Daut, mntena technlgy V1 - August 2013 CONTENTS 1. INTRODUCTION... 1 2. DEFINITIONS... 1 3. SCHEMATIC OF THE TEST SETUP WITH USE
More informationTUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE
TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE Cadence Virtus Schematic editing prvides a design envirnment cmprising tls t create schematics, symbls and run simulatins. This tutrial will
More informationClaim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start:
Claim Amalgamatin Amalgamate means t jin 2 r mre cell claims int ne cell claim. Befre yu start: Yu will need t knw the title numbers f the cell titles fr amalgamatin. If yu are acting as an agent, yu must
More informationRS232 Communication Between a Sunny Boy 2500U and a PC. Technical Note
RS232 Cmmunicatin Between a Sunny By 2500U and a PC Technical Nte Revisin 1.5 July 8, 2003 Kent Sheldn Revisin Histry 1.5 July 8, 2003 Kent Sheldn Cntact update 20830 Red Dg Rad Grass Valley, CA 95945
More informationOPERATION MANUAL. Model:8903/8904/8906. Model: 8857
OPERATION MANUAL LASER INFRARED HYGRO-THERMOMETER Mdel:8903/8904/8906 Mdel: 8857 Thank yu very much fr purchasing this Laser Infrared Hygr-Thermmeter! This unique meter design with 3 H.V.A.C &R must parameters
More informationSoftware manual. GoPal Navigator Version 5
Sftware manual GPal Navigatr Versin 5 GPal Navigatr Versin 5 Cntents CHAPTER 1: INTRODUCTION... 1 Greeting...1 Cntents f CD/DVD...1 System requirements...3 Cnventins in this manual...3 Tips and warnings...4
More informationFlux Bender Equalizer
Lightning By Audi Flux Bender Equalizer Users Guide 2014 Revised 2015 Cngratulatins n an excellent purchase! This guide was put tgether t help yu get the mst ut f yur investment. Please read this thrughly
More informationSVT Tab and Service Visibility Tool Job Aid
Summary This Jb Aid cvers: SVT Tab Overview Service Visibility Tl (SVT) Area Overview SVT Area: Satellite Mdem Status (Frm Mdem) Clumn SVT Area: Satellite Mdem Status (Frm SMTS) Clumn SVT Area: Prvisining
More informationA Basis for LDO and It s Thermal Design
A Basis fr LDO and It s Thermal Design Hawk Chen Intrductin The AIC LDO family device, a 3-terminal regulatr, can be easily used with all prtectin features that are expected in high perfrmance vltage regulatin
More informationFigure 1: View, connection compartment closed
Radi Management Art. N. : 2700AP Operating instructins 1 Safety instructins Electrical equipment may nly be installed and fitted by electrically skilled persns. Serius injuries, fire r prperty damage pssible.
More informationANALOG-TO-DIGITAL (ADC) & DIGITAL-TO-ANALOG (DAC) CONVERTERS
ANALOG-TO-DIGITAL (ADC) & DIGITAL-TO-ANALOG (DAC) CONVERTERS 37 Many events mnitred and cntrlled by the micrprcessr are analg events. ADC & DAC CONVERTERS These range frm mnitring all frms f events, even
More informationCB-030S Circuit Board
CB-030S Circuit Bard Designed fr use with the high trque PM486FH (up t 7A) Adjustable acceleratin and deceleratin time (0 t 2.5s) Stable speed peratin Switch fr manual r autmatic recvery f the thermal
More informationOPERATING MANUAL SERIES SMTBM BRUSHLESS SINGLE AXIS MODULE
OPERATING MANUAL SERIES SMTBM BRUSHLESS SINGLE AXIS MODULE Versin 40 This is a general manual describing a series f single axis mdule Serv Amplifiers having utput capability suitable fr driving Brushless
More informationAPPLICATION NOTE Sales & Application DEWESoft Slovenia
Sales & Applicatin DEWESft Slvenia Abstract: This applicatin nte shws a measurement with DEWESft sund pwer measurement system and GRAS 67HA Hemisphere. The bject under test was a standard ntebk, the measurement
More informationCUSTOMER PORTAL. Floorplan Management
CUSTOMER PORTAL Flrplan Management FLOORPLAN ANALYTICS The flrplan analytics area displays flrplans yu have uplad t the prtal (if yu haven t yet upladed a flrplan please cntact ur supprt department). Frm
More informationStandard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo)
Standard Operating Prcedure fr SEM3 (ThermFisher / FEI Apre) Befre beginning, ensure yu have an active reservatin fr SEM3 in CreResearch@Duke Lading a Sample: If Sample Exchange Windw is nt pen, click
More informationSINGER FUTURA TM Holiday Banner
SINGER FUTURA TM Hliday Banner Have fun decking the halls with this festive banner! It s s simple t make the HyperFnt sftware and yur SINGER FUTURA machine. Create the base applique right in yur embridery
More informationSARMAP RELEASE NOTES. Version: 7.0 (July 2016) rpsgroup.com
SARMAP RELEASE NOTES Versin: 7.0 (July 2016) 55 Village Square Dr. Suth Kingstwn, RI 02879 Tel: (401) 789-6224 Fax: (401) 789-1932 Email: MapSupprt@ Table f Cntents Table f Cntents...ii 1 Intrductin...
More information4- CHANNEL RGBW DIMMER RE KNT RGB
4- CHANNEL RGBW DIMMER RE KNT RGB INSTRUCTIONS MANUAL Tel.: 943627988 E-mail: knx@dinuy.cm Web: www.dinuy.cm General Descriptin - 4 utput channels PWM Dimming Actuatr designed fr the cntrl f LED strips:
More informationSignature Assignment. Course. ANTH 2302: Introduction to Archaeology. Ethical Case Dilemma. Assignment ID (to be assigned)
Signature Assignment : Intrductin t Archaelgy Outcmes/Rubrics t be Assessed by the Assignment Cmmunicatin Critical Thinking Empirical and Quantitative Reasning Scial Respnsibility Assignment Descriptin
More informationA4: Color. Light: You can usually any lighting that you wish.
Art 205 A4: Clr Original RAW Shts Due: Crit Date: Requires 2 Ink Jet Prints Munting Crrectly can btain 5 pints extra credit. (50 pints) Objectives: 1. Learn basic clr schemes fr design and aesthetics.
More informationIntroduction to Life Cycle Risk Management Help Page
Select a frequently asked questin (FAQ) t skip t its answer. Hw is the curse rganized? Wh shuld take this curse? Hw d I get credit fr this curse? What d all the navigatin buttns d? Hw d I knw what t click?
More informationNanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR.
NanScan v2 Readme Versin 2.7 Change lg v2.7 - Added infrmatin fr new prduct Pyr/9/5-MIR. v2.6 - Redesigned Messages windw. Imprved readability and ease f use. Mves almst all pp up message bxes int the
More informationMobile LightSync Link App Programing Guide Revision 2
Mbile LightSync Link App Prgraming Guide Revisin 2 Overview: The Mbile LightSync Link App emulates LightSync input devices used t cntrl ILC relays and dimmer utputs frm an Andrid r Apple mbile device.
More informationA2: Aperture, DOF, & Focus
Art 205 A2: Aperture, DOF, & Fcus Original RAW Shts Due: Crit Date: Requires 2 Ink Jet Prints (50 pints) Objectives: 1. T understand hw apertures like f-16 & f-22 have a large DOF r range f fcus. 2. T
More information