Damocles 1208 MANUAL. Damocles Damocles 1208 Manual. Input status LED indicators. Inputs Not connected

Transcription

1 Damcles 1208 Damcles 1208 MANUAL Input status LED indicatrs Inputs 5 12 Nt cnnected DIP settings Default: DIP1:SETUP = Off DIP2:SAFE = Off Inputs 1 4 Output activatin LED indicatrs Outputs 1 8 (pen cllectrs) POWER 12 30VDC / 1.7W jack and terminals cnnected in parallel ETHERNET Link & Activity

2 1) Cnnecting the cables Turn the unit upside dwn and write dwn its MAC address that is printed n the label. Set the switches: DIP1: SETUP=Off, DIP2:SAFE=Off Cnnect the unit t the Ethernet (with a patch cable t a switch, crss-ver cable t a PC) via the RJ-45 prt. Plug the pwer adapter int an electricity utlet and cnnect it t the Damcles pwer cnnectr. The green POWER LED lights up. If the Ethernet cnnectin wrks prperly, the LINK (yellw) LED lights up after a shrt while, and then flashes whenever data transfer takes place (activity indicatin). 2) Cnfiguring the IP address UDP Cnfig UDP Cnfig utility rt directry f the supplied CD (Windws and Linux versins). Available fr dwnlad at Sftware > UDP Cnfig. Click the icn t launch UDP Cnfig. The prgram autmatically lks fr cnnected devices. T search fr devices, click the Find Devices icn. The prgram searches fr devices in yur lcal netwrk. T identify a particular Damcles unit, lk at the MAC address n the label at the bttm f the unit. Duble-click a MAC address t pen a basic device cnfiguratin dialg. Cnfigure netwrk parameters IP address / HTTP prt (80 by default) Netwrk mask Gateway IP address fr yur netwrk Device name (ptinal) Click the Apply Changes buttn t save the settings. Ntes: T reset the device t factry defaults, tggle DIP1 several times within 5 secnds after pwer-up. N cnfiguratin changes can be stred while DIP2=On. T change the IP address, set DIP2=Off.

3 3) WWW interface f the device T pen the WWW interface f the device: Enter the IP address int a web brwser Click the underlined IP address in UDP Cnfig Use the right-click menu in UDP Cnfig The WWW page displays current states f inputs and utputs. Click the Flash Setup link t pen the graphical cnfiguratin interface (Flash Setup). Device IP address Overview f dry cntact inputs Output names and states Device name Detailed cnfiguratin in Flash Setup Descriptin f the values.xml file Descriptin f SNMP structures in the MIB

4 4) Flash SETUP T pen the FLASH interface, FLASH supprt needs t be installed n yur PC. If the cmputer is cnnected t the Internet, the needed plug-in is dwnladed autmatically. Flash Setup allws yu t: Cntrl utputs Display states f cunters at individual inputs Assign names t inputs and utputs and their states Watch current sensr values (refreshed autmatically at predefined intervals) Set SNMP parameters (Cmmunity names & rights), define target IPs fr SNMP traps that are sent upn alarm Set device name, passwrd, and secure IP address range TIP Fr a detailed descriptin f the Flash Setup interface and mre infrmatin in general, see the detailed Damcles family manual.

5 5) Sending Alarms and alerting Damcles supprts alerts t changes at a particular input Single Alarm, as well as alerts t a certain input cmbinatin Grup Alarm. 1 Alarm state (On r Off) t be signaled by sending an r SNMP Trap can be cnfigured fr each individual input. >> Inputs tab, green Single Alarm clumn. 2

6 Each individual Alarm needs t be activated >> Inputs tab, Enable clumn. Fr each Alarm, a target destinatin needs t be set. Fur SNMP Trap targets (named A, B, C, D) and tw targets (named E, F) are available >> Alarms tab, SNMP Trap Target r Recipient clumn. Cnfiguratin f destinatins A thrugh D (fr SNMP) and E, F (fr ) needs t be cnfirmed by clicking Apply Changes. Testing the 3 T send an directly frm the device, check the fllwing settings. Parameter Lcatin Gateway Setup > Netwrk Setting > Gateway DNS Setup > Netwrk Setting > DNS Primary/Secndary SMTP server & SNMP > Settings > SMTP server T verify the settings, send a test by clicking the Send Test buttn lcated at the & SNMP Setup tab. Custm text The text can be custmized using macrs. The macr length is limited t127 characters. Macrs are available at the Inf tab.

7 6) Cntrlling inputs / utputs with custm SW M2M prtcls Yur custm sftware can use SNMP, XML r Mdbus/TCP prtcls t cntrl utputs. PsDamIO Fr simple utput cntrl using the cmmand line, the HWg PsDamIO utility can be used. PsDamIO uplads a XML file with the requested utput states t the specified IP address. The utility is available fr Windws and Linux, including surce cde, as a part f ur HWg-SDK (available fr dwnlad at ur website). HWg-PDMS (Pseidn & Damcles mnitring sftware) Windws applicatin fr lgging data frm sensrs and inputs ver a LAN (Pseidn, Damcles, HWg-STE). The applicatin peridically reads the values f inputs and sensrs frm units cnnected t a LAN. Stred data are peridically saved as MS Excel reprts. Nte: PDMS supprts cnverting pulses cming frm energy meters t kwh r liters. Typical applicatins: IT department, auditing, utsurcing, peratins lgs

8 CapTemp Sftware fr cllecting and analyzing sensed data in fd prcessing and ther industries. CapTemp and MnTemp is a pair f utilities t mnitr prductin prcesses. The prgrams can supervise all sensrs by (temperature and humidity sensrs, cntacts, etc) as well as sensrs by ther manufacturers. CapTemp lgs the values int an internal database, displays several mst recent nes, and prcesses cnditins and alarms. Alerts t values within an alarm range are sent by , r by SMS via a GSM mdem cnnected t the PC. MnTemp subsequently prcesses stred data and generates graphic reprts, histgrams, as well as ISO r HACCP prtcls. CapTemp supprts Pseidn, Damcles and I/O Cntrller prducts Alarm alerts are sent by r SMS (GSM mdem) Cncise graphical envirnment Supprts cnditins and rules fr simple cntrl tasks Evaluatin versin functins fr 21 days withut restrictins

9 Technical specificatins Ethernet: RJ45 10BASE-T/10 Mbit/s 12 digital inputs: Shared GND terminal fr every tw inputs 8 digital utputs: Open cllectr Cnfiguratin DIP switches DIP1: SETUP Restres factry defaults if 5x tggled within 5 secnds after pwer-up DIP2: SAFE When set t On, prevents changes in the cnfiguratin. Useful e.g. fr cnnecting the Damcles t the public Internet. N settings can be changed. Device features & SNMP Trap Alarm upn detecting a specified value at an input, r a cmbinatin f values at inputs Remte mnitring f the states f inputs and utputs Pulse cunter fr every input Remte utput cntrl Lcal utput cntrl with Alarm cnditins (Grup 1 and Grup 2) Supply vltage: 12 30VDC / 1.7W Dimensins: 145 x 90 x 40 [mm] LED indicatrs: Pwer, LINK, STATUS, ALARM

10 OUTn Digital utputs pen cllectr, every pair f utputs shares a cmmn (COM) terminal COM Cmmn terminal fr a pair f utputs +U Pwer supply, +12 t +30 VDC / 1.7W -U Pwer supply grund, cnnected t cmmn grunds (COM) INn Digital inputs, t be cnnected against cmmn GND's GND Cmmn grund, ne terminal fr ne pair f inputs

11 Ethernet prt + Interface RJ45 (10BASE-T) 10 Mbps r 10/100 Mbps netwrk cmpatible + Supprted prtcls IP: ARP, TCP/IP (HTTP, Mdbus ver TCP), UDP/IP (SNMP) + SNMP cmpatibility Ver:1.00 cmpatible, partial ver. 2.0 implementatin 12 Digital Inputs + Input type 12 Dry Cntact Input (Dry cntact r Wet cntact) + Islatin Optislated (1kV) t Ethernet + Wet cntact Lgic 0: 0-3V / Lgic 1: 5-30V + Input current Min current 4mA, max current 50 ma + Pulse cunter 32 bits fr each Digital Input, min pulse width 100 ms + Max. distance Up t 100m 4 Digital Outputs + Output type Open cllectr + Max. lad 50 V max. 500 ma / 1 utput and max ma / all 8 utputs LED status indicatrs + POWER Green - pwer OK + LINK & Activity Yellw - Ethernet cnnectivity + INPUT/OUTPUT Status Green fr each INPUT/OUTPUT + Alarm Red - blinking DIP SWITCH cnfiguratin OFF = Run mde + DIP1 + DIP2 - Security Lad defaults: Tggle 3 times during first 5 secnds after device pwer-up t lad default settings. ON = Security mde - remte cnfiguratin disabled OFF = Nn-Security mde - remte cnfiguratin enabled Physical parameters + Supply vltage V/ 1,7W DC + Pwer cnnectin - caxial pwer cnnectr (barrel, inner 2.5 mm uter 6.3 mm) - cnnect pwer directly t the terminal bard + Dimensins / Weight 145 x 90 x 40 [mm] / 500 g + Temperature range Operating: -10 t 65 C / Strage: -25 t 85 C

12 Mechanical dimensins

13 Digital Inputs (DI) Digital input terminals can be cnnected t dry cntacts r t external vltage. Inputs are ptcupled. Dry cntact I I COM 55 Driving an input against the supply vltage I U Pwer GND V Pwer Uncnnected inputs read as 0 (Off) Discnnected sensr detectin: Nne, discnnected sensr reads as O (Off). Activated inputs read as 1 (On), hmic resistance depends n the supply vltage. Fr a 12V supply, the resistance must be less than 3kΩ. Fr a 24V supply, the resistance must be less than 7kΩ. Pulse cunter: Yes, 32-bit Memry: Damcles 1208 resets cunter values when pwered ff. Maximum wiring length: 100 m Supprted sensrs: Any cntact withut external vltage (dry cntact) Plling perid: 800 ms Range f input IDs: Inputs use IDs frm 1 t 12 Input names: Each input can be named using up t 12 characters State names: Input state (On and Off) can be named with up t 6 characters (e.g. Fuel Tank 14 Full / Empty )

14 Digital Outputs (DO) Open cllectr utputs with cmmn vervltage dide prtectin. Outputs are prtected with internal dides against vltage spikes (e.g. frm a relay cil). Maximum lad: 50V, 500 ma per utput, max. ttal 1500 ma ver all utputs Output names: Each utput can be named using up t 12 characters State names: Output state (On and Off) can be named with up t 6 characters (e.g. Fuel Tank 14 Full / Empty ) Output devices can be pwered frm the same pwer supply as Damcles, r frm anther surce. It is necessary t cnnect the pwer fr external devices accrdingly: A) Cnnecting the utputs internal pwer supply CAUTION When pwering the utputs (relays r bulbs) frm the Damcles unit, yu MUST cnnect the psitive (+) terminal t COM pins. - +

15 B) Cnnectin f utputs Internal pwer supply The utputs vltage spikes prtectin. Recmmended if relay r lcks are cnnects.

16 + 12V +