2300 Series Vibration Monitors Bently Nevada* Asset Condition Monitoring

Transcription

1 2300 Series Vibratin Mnitrs Bently Nevada* Asset Cnditin Mnitring Descriptin The 2300 Mnitrs feature tw seismic channels and a speed channel, prviding cntinuus mnitring and prtectin fr BOP (Balance f plant) equipment. It is a perfect match fr practively managing yur assets, rather than waiting until prductin utages t replace equipment. The 2300 series mnitrs enable cnditin based mnitring and prtectin with supprt fr varius interfaces and functins. Inputs include seismic and speed transducers, and utputs include relays, buffered utput, TCP/IP Ethernet, and an LCD display. This mnitr is available with either 4-20 ma utput (2300/20 1 ) r a TrendMaster SPA line interface (2300/25 2 ). The 2300/20 Mnitr can be used t replace legacy Bently Nevada mnitrs such as the 1900/27, but mre imprtantly it is a full featured mnitr fr use in mnitring and prtecting assets such as mtrs, pumps, and fans. The mnitr is sftware cnfigurable, and includes cnfiguratin sftware. There is als an integrated LCD and multiple LEDs t shw the channels real-time data and status lcally. Effective plant asset management, and particularly effective fleet management f machinery assets, ften depends n remte access using cnditin mnitring sftware such as System 1*. 1 Mdbus (Future availability) /25 (Future availability) Specificatins and Ordering Infrmatin Page 1 f 10

2 Mnitr Key Features 2300/20 Tw 4-20mA utputs Tw relay utputs with prgrammable setpints Ethernet 10/100 Base-T cmmunicatin fr cnfiguratin using Bently Nevada Mnitr Cnfiguratin sftware (included) One dedicated speed and Keyphasr channel supprting Prximity prbes, Magnetic pickup and Prximity switch type sensrs Three buffered transducer utputs (including keyphasr signal) prviding shrt circuit and EMI prtectin. Buffered utputs fr each signal are thrugh BNC cnnectrs Cntinuus mnitring and prtectin LCD display shwing vibratin amplitude, setpints, and speed Tw acceleratin inputs with synchrnized sampling fr advanced diagnstics Key measurements(direct 0-pk, pk-pk, Direct rms, Derived pk, integrated direct pk, Speed) real-time prvided with alarm cnfiguratin LEDs shw the mnitr status Lcal cntacts fr psitive engagement f channel bypass, cnfiguratin lckut, and reset Optinal Mdbus ver Ethernet 2300/25 Trendmaster SPA interface Tw relay utputs with prgrammable setpints Ethernet 10/100 Base-T cmmunicatin fr cnfiguratin using Bently Nevada Mnitr Cnfiguratin sftware (included) One dedicated speed and Keyphasr channel supprting Prximity prbes, Magnetic pickup and Prximity switch type sensrs Three buffered transducer utputs (including keyphasr signal) prviding shrt circuit and EMI prtectin. Buffered utputs fr each signal are thrugh BNC cnnectrs Cntinuus mnitring and prtectin LCD display shwing vibratin amplitude, setpints, and speed Tw acceleratin inputs with synchrnized sampling fr advanced diagnstics Key measurements(direct 0-pk, pk-pk, Direct rms, Derived pk, integrated direct pk, Speed) real-time prvided with alarm cnfiguratin LEDs shw the mnitr status Lcal cntacts fr psitive engagement f channel bypass, cnfiguratin lckut, and reset Optinal Mdbus ver Ethernet Recmmend fr Demnstratin Kit 2300/20_KIT /20 Mnitr 1-6 ft. (1.8M) shielded Ethernet cable 2 - Accelermeter sensrs 2-16 ft. (4.8M) accelermeter cables T be rdered separately 106M Pwer supply: 110/220 VAC t 24 VDC DIN munt (30W pwer supply package, -25 C ~70 C) Specificatins and Ordering Infrmatin Page 2 f 10

3 Specificatins Inputs / Outputs Pwer Input: DC Input: 18~36VDC, max 7.5W Supprts 2 seismic channels: Supprts ICP accelermeters Bandpass variable: 0.2 Hz High pass, 20 khz Lw pass Scale Factr range: 5 t 575 mv/g Full scale range: 2 t 80 g peak Bias utput vltage: -12VDC Cnfigurable Upper OK limit: t -22 V (greater than lwer k) Cnfigurable Lwer OK limit: t -22 V (less than upper k) Current Sink Surce: 3.3 ma ± 5% Open Circuit Vltage: -21 t -24 VDC Accuracy: ±1% f full scale range Supprts custm accelermeters (2 r 3 wires) Independent 24-bit ADCs n bth channels Speed/Keyphasr* Inputs Supprted Keyphasr transducers include: Prximity prbe Prximity switch Magnetic Pickup Supprts multiple events per revlutin and event ratis fr speed inputs up t 20 khz Threshld vltage reslutin: 0.1VDC Prximity Transducer Interface: Supply Vltage: t 25.2 VDC Maximum Rated Current: 15 ma Shrt Circuit Current: 15.1 ma t 23.6 ma Accuracy: ±1% f full scale range Input Impedance: 3-wire Vltage Mde, 10 kω Rpm range: 1 t 120,000 Prximity Switch Interface: Supply Vltage: -10 t -24 VDC Lwer Nt Ok limit: ±0.05 V Rpm range: 1 t 120,000 Magnetic Pick up: Input vltage up t ±125V (250Vp-p) Rpm range: 200 t 120,000 Cntact Inputs Mnitr prvides the capability f 3 cntact inputs with terminals. One is used fr cnfiguratin lck, ne is fr alarm reset functin, and the 3rd ne is used fr mnitr Alarm/Relay Inhibit. Activate: 0 t 10 kω De-activate: 150 kω t infinite Buttn Inputs External buttn t reset alarm and relay One buried buttn prvides 3 functins: Display mnitr infrmatin including: User accunt/passwrd IP address FW/HW versin LCD cntrast adjustment Reset settings t default including: User accunt name Passwrd Netwrk cnfiguratin Jumper between COM & Chassis GND There is a 2-pin terminal interface which allws cnnectin f COM and Chassis GND tgether Alternatively, COM can be cnnected t earth grund separately thrugh a terminal Buffered Output There are three buffered utputs available n the mnitr thrugh BNC cnnectrs Relay Output There are tw dry-cntact relay utputs May be nrmally energized r de-energized N utput feedback determinatin Specificatins and Ordering Infrmatin Page 3 f 10

4 Relay circuit specificatin in Nn-Hazardus area: Type: Single ple, duble thrw Sealing: Epxy sealed Cntact life: 100,000 5 amps 250 VAC 1 amp, 24 VDC Insulatin resistance: 1000 MΩ 500 VDC Relay clsed cntact resistance: 1 Ω maximum Relay pen cntact resistance: 1 MΩ minimum Maximum switched cntact vltage: 250V AC /250V DC Maximum breaking cntact current: / Maximum switched pwer: 1500VA AC / 150 Watts DC Relay circuit specificatin in Hazardus area: 4-20mA Output Maximum switched cntact vltage and current: / / / Tw 4-20mA utputs 4 t 20mA utput values are prprtinal t the full-scale f the assciated measurement Each utput can be sftware cnfigured t utput any variable frm channel 1 r 2 Vltage cmpliance: 0 t +12Vdc range acrss lad Lad resistance: 0 t 600Ω Reslutin: uA Accuracy: 1% ver perating temperature range Update rate: 100ms 2mA clamp current N utput feedback determinatin LEDs OK: Indicates when the mnitr is perating prperly Prtectin fault: indicates a prblem with the system preventing nrmal peratin User inhibit: indicates the relays have been intentinally inhibited frm peratin Relay status: indicates if relays have been activated TX/RX: Indicates the Ethernet status and mnitr cmmunicating with remte sftware Speed channel status Channel Alarm Status: LCD Alert LED: engages if any channel is in alert state Danger LED: engages if any channel is in danger state LCD display allws viewing machine speed, vibratin levels, setpints, and cnfiguratin infrmatin. Cmmunicatins Ethernet Ethernet, 10Base-T and 100Base-TX. Cnfrms t IEEE802.3 RJ-45 fr 10Base-T/100Base-TX Ethernet cabling Cable length: 100 meters (328 ft.) maximum Envirnmental Limits Operating Temperature: -30 C t +65 C (-22 F t +149 F) Strage Temperature: -40 C t +85 C (-40 F t +185 F) Humidity: Up t 95%, nn-cndensing Battery Life fr Real Time Clck: Pwered: C (122 F) Un-pwered: C (122 F) Specificatins and Ordering Infrmatin Page 4 f 10

5 Cmpliance and Certificatins General and Electrical Safety: UL Std. N (3rd Editin) CAN/CSA C22.2 N /95/EC Lw Vltage Standard: EN : 2010 Eurpean Cmmunity Directives: 2006/95/EC Lw Vltage 1.03kg (2.26lbs) Munting Panel munt r DIN rail (adapter included) EMC Standards: EN Immunity fr Industrial Envirnments EN Emissins fr Industrial Envirnments EN Electrical equipment fr measurement, cntrl and labratry use - EMC requirements Eurpean Cmmunity Directives: EMC Directive 2004/108/EC Hazardus Area Apprvals Apprval Optin (01) CSA, Canada and U.S. Class I, Divisin 2/Zne 2 ATEX: II 3G Ex na nc [ic] IIC T4 Gc IECEx: Ex na nc [ic] IIC T4 Gc Intrinsic Safety Parameters: Fr Prximitr Transducer: U: 24VDC; I: 46mA; C: 200nF; L: 1mH Fr Acceleratr/Velmitr Transducer: U: 24VDC; I: 3.3mA; C: 200nF; L: 1mH Fr further certificatin and apprvals infrmatin, visit the fllwing website: Physical Dimensins (Width x Depth x Height) 127mm x 127mm x 76.2mm (5in x 5in x 3in) Weight Specificatins and Ordering Infrmatin Page 5 f 10

6 Ordering Infrmatin 2300 Series Vibratin Mnitr 2300/20-AA: Mnitr with 4-20ma Outputs (including DIN rail munt assembly, manual and mnitr cnfiguratin sftware) AA: Apprvals Optin 0 0 Nne 0 2 Multiple Explsive Atmsphere Certificatins (ATEX/IECEx) BB: Apprvals Optin 0 0 Nne 2 - Accelermeter sensrs 2-16 ft. accelermeter cables (Excluding keyphasr sensr, enclsure and 24 VDC pwer supply 3 ) 0 2 Multiple Explsive Atmsphere Certificatins (ATEX/IECEx) 3 We prvide 2 kinds f pwer supplies with different temperature range and different pwer. Please check Accessries in belw fr the details. 2300/20_KIT-AAA-BB: Bently Nevada 2300/20 Cnditin Mnitring System Kit AAA: Cnfiguratin /20 Mnitr 1-6 ft. (1.8m) shielded Ethernet cable 1-13x15x8 in. (338x389x209mm) fiberglass husing with windw 2 - Accelermeter sensrs 2 16 ft. (4.8m) accelermeter cables (Excluding keyphasr sensr and 24 VDC pwer supply 3 ) /20Mnitr 1-6 ft. shielded Ethernet cable 1-13x15x8 in. fiberglass husing with windw 1 - Accelermeter sensr 1-16 ft. accelermeter cable (Excluding keyphasr sensr and 24VDC pwer supply 3 ) /20 Mnitr 1-6 ft. shielded Ethernet cable Specificatins and Ordering Infrmatin Page 6 f 10

7 Accessries AM3100T2-Z2 Accelermeter sensr 106M Pwer supply: 110/220 VAC t 24 VDC DIN munt (30W pwer supply package, -25 C ~70 C, 35X99X95 mm (1.38x3.90x3.74 in)) 106M Pwer supply: 110/220 VAC t 24 VDC DIN munt (120W pwer supply package, -40 C ~70 C, 40X130X125 mm (1.57x5.12x4.92 in)) 105M Fiberglass NEMA 4X/IP68 weatherprf husing with windw in dr (includes munting plate fr mnitr) Dimensins: (Width x Depth x Height) 338.3mm x 389.1mm x 209.8mm (13.3in x 15.3in x 8.2in) 100M0741 Prximity Switch Magnetic Pickup Prximity Prbes Please refer t prximity prbe datasheet fr details XL 8mm Specificatins and Ordering Infrmatin Page 7 f 10

8 XL 11mm XL NSV Bulk Cable frm Prximity sensr t mnitr (500 ft.) 9571-AA AA: Lw cst cable fr accelermeter Frm 20 t 99 Increments f 1.0 ft AAA: Spares Cable Length ft. (1.8 m) ft. (3.0 m) ft. (7.6 m) ft. (12.2 m) ft. (15.2 m) ft. (22.9 m) ft. (25.9 m) ft. (30.5 m) 105M mm DIN rail munt and screws (included with 2300/20 mnitr) AA Armred cable fr accelermeter AA: Frm 30 t 99 Increments f 1.0 ft 106M M M M M M pins 4-20mA utput cnnectr 5 pins cntact input cnnectr (Alarm Reset) 5 pins cntact input cnnectr (Alarm Inhibit, Cnfig lck) 16 pins transducer input cnnectr 6 pins relay utput cnnectr 3 pins pwer input cnnectr CB2W100-AAA Cable fr accelermeter AAA: ft. (4.8 m) ft. (9.8 m) ft. (19.5 m) ft. (34.1 m) ft. (38.1 m) ft. (45.7 m) ft. (61.0 m) ft. (76.2 m) Magnetic munting base ¼ -28 threaded hle Ethernet Cables AAA Standard 10 Base-T/100 Base-TX Shielded Categry 5 Cable with RJ-45 cnnectrs (slid cnductr) Sftware 100M BN Mnitr Cnfiguratin SW/FW DVD User Manual BNMC versin 4.0 r greater 2300 series mnitr firmware (DVD including BNMC Cnfiguratin Guide) 105M Operatin and Maintenance Manual Training Materials Link /PrgramDetail.aspx/2300Mnitr Specificatins and Ordering Infrmatin Page 8 f 10

9 Graphs and Figures The mnitr must have 2.5 inch clearance n each side fr wiring installatin. Specificatins and Ordering Infrmatin Page 9 f 10

10 Wiring Diagram 2300/20 and 2300/25 uses the same interface cnnectr fr recrder utput r SPA utput. * Dentes a trademark f Bently Nevada, Inc., a whlly wned subsidiary f General Electric Cmpany. Mdbus is a registered trademark f Mdicn, Inc Bently Nevada, Inc. All rights reserved. Printed in USA. Uncntrlled when transmitted electrnically Bently Parkway Suth, Minden, Nevada USA Phne: Fax: Specificatins and Ordering Infrmatin Page 10 f 10