Firmware Release Summary: Daniel 3410 Series Gas Ultrasonic Flow Meters

Transcription

1 Firmware Release Summary: Daniel 3410 Series Gas Ultrasnic Flw Meters VERSION 1.35 Added supprt f read-nly serial prt. All available serial prts n USM meter can be cnfigured in Read-nly r Read-write mde USM Gas firmware supprts GERG-2008 (AGA8 Part 2, 2017) calculatin fr gas thermdynamic prperties and speed f sund Transducer perfrmance alarms are suppressed until chrd perfrmance drps belw a cnfigured limit Cntinuus flw analysis alarms (Bre Buildup Detectin, Blckage Detectin, Liquid Detectin, Abnrmal Prfile Detectin and Alarm fr errr between AGA speed f sund and meter calculated speed f sund) can be cnfigured as Digital Output. On Dual-Cnfiguratin meters: Uncrrected flw rate range validity alarm can be cnfigured as Digital Output Transmitter Head 2 can be cnfigured t read gas prperties, flw-cnditin pressure, and flw-cnditin temperature values frm Transmitter Head 1 Uncrrected flw rate and speed f sund deviatin percentage are lgged in hurly and daily lgs t view trend f Transmitter Head 2 speed f sund and uncrrected flw rate percentage difference with Transmitter Head 1 Additinal enhancements include: Fixed issue where turbulence fr diagnstic chrd will nt be calculated when Chrd A fails in batch Fixed issue where meter will get lcked when nly ne cmpnent is dwnladed after unzipping firmware release file. Nw meter will nt allw dwnlading individual cmpnents after unzipping firmware release file. Fixed issue where AvgFlw will fluctuate briefly immediately after a chrd is reacquired Fixed issue where IsMeasSndSpdRange<Chrd> alarm is lgged excessively causing alarm lgs t get full Fixed issue where HART cmmunicatin will intermittently drp when archive lgs are pulled frm the meter Fixed issue where HART cmmunicatin will drp when archive lgs are pulled frm meter simultaneusly by tw clients Fixed issue where measurement data is discarded n all chrds when a chrd is marked inactive Fixed issue where meter will fail t discard distrted wavefrms frm measurement due t incrrect psitive r negative span as bad 2018 Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 1 April 2018

2 Fixed issue where standard deviatin f CrssFlw, Symmetry, and PrfileFactr, which are used fr detectin f Liquids in meter, are calculated incrrectly Fixed issue with Dual-Cnfiguratin meter where IsClcMeterQFlwRangeErr alarm is activated when there is sudden change in flw rate VERSION 1.31 Dual Cnfiguratin meters sync clcks s time lgs and alarms are synchrnized prviding meaningful time stamp data released fr 3415, 3416, and 3417 meters. Added diagnstic chrd status indicatins. Greatly simplified transducer swap-ut and replacement with MeterLink. Users n lnger need t prvide infrmatin abut the replaced transducer(s) Additinal enhancements include: Raised gas chrmatgraph cmmunicatin alarm in a timelier manner Decreased time t get DHCP address Decreased lg file generatin time Fixed frequency utput errrs when meter measurement mde Is changed frm standard batch t rapid batch, Test mde t enabled/disabled, Or frequency utput is recnfigured Fixed Mdbus RTU framing errrs at high baud rates Fixed flw prfile crrectin factr errr n 3411 and 3412 meters when AGA8 calculatins are invalid Fixed issue with Mdbus TCP/IP where Mdbus cmmunicatin will fail when Mdbus TCP/IP prt is cnfigured with a reserved prt number Fixed issue with transducer maintenance alarm where the alarms fail t clear when meter measurement mde is rapid batch Fixed issue with signal acquisitin where meter fails t g int measurement mde when firing sequence is changed frm default value Fixed issue with event and archive lgs where a lg full alarm is nt cleared n enabling lg verwrite feature VERSION 1.27 Enhanced meter cnnectivity via Ethernet, enabling the meter t cmmunicate with a gas chrmatgraph (GC) t read gas cmpsitins using Mdbus TCP/IP ver Ethernet. (Daniel MeterLink v1.31 r newer must be installed) Updated HART cmmands t Revisin 6 t supprt cnfiguratin f: 2018 Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 2

3 Additinal frequency utputs and digital utputs (FODOs) n the Type 4 CPU Bard 1 GC Mdbus TCP/IP Daniel Dual-Cnfiguratin Gas Ultrasnic Flw Meters (Mdels 3415, 3416 and 3417). Additinal minr enhancements include: Fixed issue where measurement was affected during wavefrm cllectin when the meter was in rapid batch mde. Fixed issue where firmware intermittently read incrrect pressure and temperature input values when the meter was running under high stress. Fixed issue where the meter generated an empty lg file during creatin f an event r timed lg if the meter s clck was backdated. Fixed issue where the meter did nt generate an alarm during firing synchrnizatin (lsxdcrfiringsyncactive) resets. VERSION 1.24 Added supprt fr the new Type 4 CPU Bard that includes six Frequency/Digital Outputs and remves Analg Output 2. Added supprt fr new Daniel T-41 transducers. 2 Minr enhancements include: Fixed GHOST netwrk vulnerability discvered within Linux libraries. Fixed issue with frequency utput in test mde drpping when meter ges frm measurement int acquisitin mde. Fixed issues with AGA10 sund velcity and SOS cmpare difference algrithm where AGA10SndVelStatus and SOSCmparePctDiff were incrrectly cmputed by firmware. VERSION 1.23 Added supprt fr new dual-cnfiguratin Mdels 3415 and 3416 meters. Added supprt f diagnstic chrd alarms in the dual-cnfiguratin Mdel 3416 meter t detect speed f sund errr. Added supprt fr cnfigurable GC gas cmpnent indices, allwing the meter t cmmunicate with all Rsemunt gas chrmatgraphs as well as third party gas chrmatgraphs that supprt SIM Enhanced Transducer Health Mnitring t avid transducer maintenance alarms when there is n flw in the meter (i.e. meter is belw LwFlwLmt) r when the meter is in acquisitin mde. Added supprt t display vlume fr a minimum f 8000 hurs f peratin at Qmax withut the display rlling back t zer, ensuring the meter is in cmpliance with the Eurpean MID directive and OIML R Type 4 CPU Mdule releasing fr sale in December Daniel T-41 transducers releasing fr sale in January Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 3

4 Additinal minr enhancements include: Fixed issue with Mdbus server t prevent lcking f the TCP/IP prt when client rapidly cnnects and then discnnects this server frm the meter. Fixed issue with hurly and daily lgs where any entry with a zer value is nt averaged. Fixed issue with lcal display where the displayed value remains in verflw state and des nt refresh. Fixed issue with cmmunicatins between the CPU and the acquisitin mdule that caused fast cnfiguratin wavefrms packets t reset in the acquisitin mdule. Fixed issue where all chrds can be set t inactive n 3410 Series JunirSnic meters. Fixed issue t prevent writing zer t LA..LD & PipeDiam which can cause the meter t reset. Fixed issue with PPP cmmunicatin where cmmunicatin drps if UnitsSystem is changed. Fixed issue with lcal display where value f is runded t 1.000E07. Fixed issue with archive lgs causing the meter t nt create a new recrd when DOverwriteUnreadAlarmLg is set t FALSE and the lg is full. Fixed issue where system lgs are generated fr inactivated chrds when the meter is in acquisitin mde. Fixed issue with archive lgs where alarms assciated with archive lg is full are nt cleared when lgs are marked as read until a new archive lg is generated. Fixed issue where meter des nt acquire back when min hld time (MinHldTm) is written back with a valid value. Fixed issue where transducer firing synchrnizatin (XdcrFiringSyncActive) resets after inactivating chrds. Fixed issue with system lgs where the system lg XML file is nt well frmed due t a crrupt message. Fixed issue with hurly and daily lgs where time slips by ne secnd. VERSION 1.18 Added supprt fr 3-slt retrfit enclsure. Added supprt fr a Prt C serial prt. Added supprt fr RS-485 n Prt B and Prt C. Enhanced Transducer Health Mnitring t avid unnecessary alarms and prematurely discarding wavefrms. Additinal minr enhancements include: Prevented issues with reccurring live pressure and temperature errrs in System lgs. Fixed issue where Prt A RS-485 full duplex did nt wrk at 1200 r 2400 BPS Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 4

5 Fixed issue where units wuld be frced t U.S. Custmary and time base t per hur fr Prt A when Prt A verride switch was tggled. Fixed issue that culd cause Acquisitin Mdule cmmunicatin errrs while streaming wavefrm files. Fixed issue where CurrDayFlwTime and CurrHurFlwTime always reprt zer. Fixed issue where a chrd remained in failure mde after activating an inactive chrd. VERSION 1.16 Enhanced chrd substitutin feature t imprve the accuracy f the calculated measurement in the event f a chrd failure. VERSION 1.13 Added display f CRC-32 checksum n lcal display if installed fr cmpliance t OIML R137. VERSION 1.11 Fixed an issue that caused meters with larger path lengths (i.e. 24 JunirSnic meter, etc.) t experience chrd failure when the flw rate increased abve a certain velcity. Chrd recvery ccurred during n flw cnditins. VERSION 1.09 Fixed an issue intrduced in V1.07 firmware. If the system clck was set t a date prir t 1 January 2003, as is ften the case during installatin, the externally visible meter time (i.e. RTCSecndsSinceEpchRead, RTCSecnd) will nt be prperly updated. VERSION 1.07 Enhanced Transducer Type cmmand (i.e. SetXdcrType) t default t different tracking parameters if running a JunirSnic r SenirSnic 3410 Series Meter. Previusly, the meter did nt distinguish between these tw meter types when setting the tracking parameters Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 5

6 VERSION 1.06 Added supprt fr T-32 lw pressure transducers. Additinal minr enhancements include: Fixed issue in which activating Write Prtect while Output Test is underway led t meter rebting. Prevented selectin f Live GC inputs if GCSerialPrt is disabled. Fixed issue t prevent prper chrd weightings frm being applied when DeviceNumber is changed. Fixed issue in the lcal display that culd cause task t fail when the lcal display cnfiguratin is changed. Crrected errrs in lgging f temperature alarms. VERSION 1.04 Added supprt fr HART 7. Added supprt fr Lcal Display. Added supprt fr GC Master functinality n serial Prt A. VERSION 1.03 Required t achieve accurate analg utput values fr IOBdType 2 and later. Analg utput errr was 0.38%. IOBdType can be fund in Daniel MeterLink Sftware in the Meter Infrmatin sectin. Emersn Autmatin Slutins Daniel Measurement and Cntrl, Inc. Nrth America / Latin America: Headquarters USA - Hustn, Texas T USA Tll Free FLOW.001 Eurpe: Stirling, Sctland, UK T Middle East, Africa: Dubai, UAE T Asia Pacific: Singapre T Daniel Measurement and Cntrl, Inc. ( Daniel ) is an Emersn Autmatin Slutins business unit. The Daniel name and lg are trademarks f Daniel Industries, Inc. The Emersn lg is a trademark and service mark f Emersn Electric C. All ther trademarks are the prperty f their respective cmpanies. PAGE 6