ColorCheck Reference Guide Onyx Graphics Inc. May 2018

Transcription

1 ClrCheck Reference Guide Onyx Graphics Inc. ClrCheck prvides an integrated tl set within Onyx Rip-Queue fr evaluating varius aspects f printing. With these tls in place a printer peratr can easily assess print accuracy as well as ensure that printed results are cnsistent day after day fr multiple printer devices f the same make and mdel. ClrCheck simplifies the implementatin and maintenance f Prcess Cntrl within a printing envirnment which can imprve efficiency and reduce waste - thus saving time and mney.

2 Table f Cntents Onyx ClrCheck Reference Guide 1. Prcess Cntrl and ClrCheck Maintenance f Equipment Maintaining a stable printing envirnment Prper prfiling and calibratin f printers Quality cntrl f media and inks Ensuring that printed utput is crrect Regular evaluatin f printed results ClrCheck verificatin prcesses Quick and easy ClrCheck Start Print ClrCheck dialg Print Swatch Measure Swatch View Reprt Wrking with HTML Reprts Wrking with Swatch Measurements Setting up and using ClrCheck Using Baseline ClrCheck acrss multiple printers (f same mdel) Create/imprt a media and print mde Print and measure a baseline swatch fr ne r mre print mdes fr a media Exprt media cntaining ne r mre baselines Install Printer r Imprt media cntaining baseline Select the installed/imprted media in Rip-Queue Print an imprted baseline swatch Measure the swatch and get reprt Other cases Page 2

3 4. ClrCheck Overview Intrductin Baseline Envirnment G7 Master Envirnment G7 Grayscale G7 Targeted G7 Clrspace Standards Simulatin Envirnment Print Gamut Verificatin Envirnment Named Clr Evaluatin Envirnment Custm Image Envirnment ClrCheck Cnfiguratin Intrductin Operatins within the Cnfigure ClrCheck dialg New Cpy Edit.../View Delete Print Exprt Imprt Rip-Queue Usage Print Print frm Print Setup Tab Print frm ClrCheck Tab Measuring & Reprting Measure Page 3

4 Reprt Wrking with ClrCheck swatch jbs My ClrCheck validatin/verificatin failed Nw What? ClrCheck trubleshting checklists Baseline trubleshting flwchart G7 Master / Standards Simulatin trubleshting flwchart Print Gamut Verificatin trubleshting flwchart Page 4

5 1. Prcess Cntrl and ClrCheck Onyx ClrCheck Reference Guide Prcess cntrl invlves setting up prcesses in a print envirnment t ensure that printing (and finishing) is perfrmed cnsistently and crrectly The ClrCheck tls in RIP-Queue nly prvide ne part needed t assess and implement prcess cntrl within a printing envirnment. Prcess cntrl requires a mindset f excellence and understanding by everyne invlved in the printing prcess. As such, prcess cntrl in a print envirnment invlves: Maintenance f Equipment Maintaining a stable printing envirnment Prper prfiling and calibratin printers Quality cntrl f media and inks Ensuring that printed utput is crrect Regular evaluatin f printed results Lts f details (like prcesses, frms, and checklists) Maintenance f Equipment Equipment must be maintained t ensure that printing is dne cnsistently. Questins t cnsider when setting up prcess cntrls related t equipment maintenance may include: What is being dne t ensure equipment is wrking crrectly (nzzle checks, self diagnstics, repairs, etc.)? Are finishing devices (laminatrs, calendars, heat presses) maintained and perated cnsistently? What is the maintenance schedule fr the equipment (daily, weekly, etc.)? Are clr measurement devices prperly calibrated, maintained, and serviced? 1.2. Maintaining a stable printing envirnment The physical envirnment where printing is perfrmed and where materials are stred can dramatically impact the final printed utput. Questins t cnsider when setting up prcess cntrls related t the printing material strage envirnment may include: Are physical cnditins cnsistent? Hw is temperature and humidity cntrlled? What factrs f air quality are maintained (dust, fumes, air flw, etc. )? Hw stable are the print mdes being used? Page 5

6 1.3. Prper prfiling and calibratin f printers Prperly setting up and maintaining clr management fr the printers, media, ink cnfiguratins, and print mdes is essential t getting cnsistent and predicable utput. Questins t cnsider when setting up prcess cntrls related t prper prfiling and calibratin f printers may include: Was the printer in a stable printing cnditin when prfiling was perfrmed? Has calibratin been perfrmed? Is the clr device used fr prfiling/calibratin prperly maintained and used? Has prfiling been crrectly perfrmed fr the printer, media, inks, ink cnfiguratin and print mde? Is the printer printing the same as when prfile was perfrmed? When is re-calibratin perfrmed? What prcess are put in place when things change (ie media r ink)? 1.4. Quality cntrl f media and inks Ensuring cnsistency in the media, ink and materials used fr image reprductin is essential fr getting cnsistent and predictable utput. Questins t cnsider when setting up prcess cntrls related t quality cntrl f media and inks may include: Hw is stability f inks in printers maintained? Hw des the media and ink change ver time? What is the age f media r ink being used? Are yu using the same media and ink, and are they cnsistent with the prfiles that yu are using? What prcesses are in place t ensure that media is cnsistent when replaced/restcked? What prcesses are in place t ensure that ink is cnsistent when replaced/restcked? If ther materials are used what prcesses are in place t ensure that they are cnsistent when replaced/restcked? 1.5. Ensuring that printed utput is crrect G7, Standards Simulatin, and Print Gamut Verificatin ClrCheck verificatin tls prvides a means f determining that printing is perfrmed crrectly after prfiling is perfrmed. This ensures that a standard level f utput quality is achieved Regular evaluatin f printed results After standards and a level f quality has been established then regular reassessment using the Baseline ClrCheck verificatin tl prvides a means f evaluate hw cnsistently printing is being perfrmed. The Baseline tl can als be use t assess hw similar utput is frm multiple printers that share the same prfiles. Page 6

7 1.7. ClrCheck verificatin prcesses Onyx ClrCheck Reference Guide In the cases when ClrCheck verificatin fails then an evaluatin will be needed t determine what parts f the printing prcess/envirnment are invlved and put crrective measures in place. The prcesses used t d this shuld becme part f the prcess cntrl system put in place fr a printing envirnment. Page 7

8 2. Quick and easy ClrCheck Onyx ClrCheck Reference Guide Yu dn't necessarily need any special clr management training t test the cnsistency r accuracy f yur printed utput. We have included several ClrCheck swatches ut f the bx t help yu get started. Fr this example, we will use the ONYX Weekly Baseline swatch Start Print ClrCheck dialg Once RIP-Queue is nline, click n the g t the ClrCheck tab, and click the <Print ClrCheck...> buttn. Figure ClrChek Tab 2.2. Print Swatch Select the clr device yu want t use, then select the ONYX Weekly Baseline swatch as well as the print mde and quickset t use and click Print. (Nte: Printing a ClrCheck swatch verrides varius settings f a Quick Set including media and mde if they are explicitly set by the Quick Set). Figure Print ClrCheck Swatch Dialg Page 8

9 2.3. Measure Swatch After yu print the swatch, the jb will switch t a "Waiting T Measure" state. Select the jb in the queue and then click the Measure Swatch icn n the tp left t measure the swatch. Figure ClrCheck Jb in Queue with Measure tl enabled 2.4. View Reprt After the swatch is read in, yu will be presented with yur first ClrCheck Baseline reprt. All the delta E values will be zer because yur initial measurements are the baseline fr future Baseline tests. The next time yu print and read a Baseline swatch it will be validated against these initial measurements. Figure Verificatin Results reprt after measurement After the Verificatin Results reprt is clsed and measurements are cmpleted the ClrCheck Swatch jb will be mved t the Buffered queue area with the status f the jb set t reflect the status f the swatch verificatin. The swatch verificatin reprt can als be viewed by selecting the jb and viewing the jb prperties. Page 9

10 Figure Verificatin reprt frm Jb Prperties Onyx ClrCheck Reference Guide 2.5. Wrking with HTML Reprts A save as dialg is displayed after pressing the <Reprt > buttn frm either the pst measurement Verificatin Results dialg r the Jb Prperties dialg. By default ClrCheck HTML reprts are placed in the PCT\Reprts flder using the swatch name and the time and date. Figure Create HTML reprt dialg After the HTML reprt file is saved the default brwser is then used t display the reprt. Several key interactins are pssible. Page 10

11 Figure View f HTML ClrCheck reprt frm Chrme brwser The patches can be hidden by pressing the Hide buttn. The clumns with up/dwn arrws in the Patches table can be srted by clicking n the clumn header. Nte: Clicking twice n thee00 clumn will srt the clr differences frm largest t smallest. This is a quick and simple way t determine prblem areas. Page 11

12 The current state f the reprt in the brwser can be printed using the brwsers print functinality. (Nte: The printed reprt will reflect f the patches hidden r srted state). Frm Chrme this is dne by pressing the three dts in the upper right and selecting <Print >. Figure Printing ClrCheck HTML reprt with patches hidden 2.6. Wrking with Swatch Measurements Measurements f swatch patches can be directly viewed r exprted frm the <View Measurements > buttn at the bttm f the Verificatin Results r Jb Prperties dialg. If the Page 12

13 dwn arrw next t the buttn is pressed a menu f View Measurements r Exprt Measurements is shwn and can be selected. Figure View Measurements... A CGATS file can be exprted using the Exprt Measurements and then entering a filename and lcatin t save the exprted measurements. Figure Exprt Measurements... Page 13

14 3. Setting up and using ClrCheck Onyx ClrCheck Reference Guide When setting up ClrCheck ne shuld first cnsider what they want t be able t evaluate and then cnfigure ClrCheck swatch definitins that can be used n a regular basis. Are yu evaluating clr cnsistency r clr accuracy? Are yu simulating a print standard r simply maximizing the capabilities f yur printer? Care needs t be made when setting up fr evaluatin f standards simulatin as Input prfiles in Quick Sets need t be cnfigured t agree with the standards characterizatin data sets used. ClrCheck validatin may fail as a result f clr management cnsideratins nt being taken int accunt. The fllwing use cases prvide setup and usage Using Baseline ClrCheck acrss multiple printers (f same mdel) When as baseline swatch is printed and measured the swatch cnfiguratin and measurements are persisted as part f a print mde s prfile data in the printer repsitry. Therefre a baseline s swatch cnfiguratin and measurements are saved as part f the print mde definitin when either a Printer Install Library (PrnInst) file r an Onyx Media Library (OML) file is created. Additinally, encapsulated mde specific baseline swatch cnfiguratins and measurements are imprted as part f either installing a printer r imprting an OML. This allws ClrCheck baseline checking t be used t ensure that printing is perfrmed the same fr multiple printers that can use the same media and print mdes. This is accmplished using the fllwing steps Create/imprt a media and print mde Use media manager t create and prfile a media and print mde. Alternatively ne can imprt a media that desn t have baseline measurements Print and measure a baseline swatch fr ne r mre print mdes fr a media Fllw the steps in Sectin 2 t print and measure a baseline swatch fr the media and print mde set up in Sectin (Nte: it may be desirable t first create (r cpy and mdify) a baseline swatch that will be used t determine that printers are printing the same). (Nte: This may be repeated fr multiple print mdes). Generally it is a gd idea t print and measure a baseline after creating a prfiling a print mde Exprt media cntaining ne r mre baselines The mde specific baseline swatch cnfiguratins and measurements are saved as part f exprting a media. This can be dne in three ways. The first is t create a PrnInst frm the File>Manage Printers dialg in Rip-Queue. The secnd is by exprting medias as an OML file using the <Exprt > buttn n the Media Tab f the Cnfigure Printer dialg in Rip-Queue. The third is by using the <Exprt > buttn after selecting a media in the Media Library sectin f Media Manager. Page 14

15 Install Printer r Imprt media cntaining baseline Either install a new printer using the PrnInst, r imprt t an alternate printer frm the OML created in Sectin Select the installed/imprted media in Rip-Queue Make the printer in the Rip-Queue be the active printer where the media was installed in Sectin by selecting the printer at the tp f the Rip-Queue windw. Then select the media t be the active media fr the printer Print an imprted baseline swatch Select the ClrCheck tab in the printer setup panel n left side f Rip-Queue windw and press <Print ClrCheck > t bring up the Print ClrCheck dialg. Select the mde specific baseline swatch (with <mde> at end f the swatch name). Select the clr device t measure with and the quickset, and then print the swatch Measure the swatch and get reprt Once the swatch has been printed select the jb, measure swatch, and view reprt as defined in Sectin Print mde relative named clr reprtting Bth the PANTONE Cated Reprt and PANTONE Uncated Reprt swatches use PANTONE prvided measurement data t determine clr differences used in the reprts. When mde specific device ink values fr printing PANTONE clrs are defined, the device values are applied t the printing f the swatch, and clr differences are made relative t the PANTONE prvided measurement data. Named clr reprting can be cnfigured fr clr difference cmparisns t be made relative t clr measurements fr the desired device ink replacements. This can easily be dne by: First, making a cpy f the Reprt swatch definitin. Secnd, editing the cpied swatch definitin, and clicking n the <Optins > buttn. Third, turn n the Cmpare with print mde defined clrs (when set) check bx Pres <OK> n the dialgs t save the changes Use the updated swatch definitin t print and generate a reprt. Named clr reprts using this cpy will use the clrimetry f the replaced ink values (based n the default ICC prfile assciated with the print mde fr reprting clr difference metrics. Nte: Print mdes created using HP PANTONE Emulatin define device ink replacements fr all PANTONE clrs and print mde relative named clr reprts will shw small clr differences (since they cmparisn in relative t the device ink replacements created fr the print mde). Page 15

16 3.3. Other cases Walkthrughs prvide a basic guide fr setting up and using ClrCheck Further cnfiguratin can be fund in Sectin 5. Page 16

17 4. ClrCheck Overview 4.1. Intrductin Onyx ClrCheck Reference Guide The ClrCheck cnfiguratin manager can be used t create, manage and print ClrCheck swatches. Three types f ClrCheck swatches are pssible: T determine clr cnsistency (Baseline) T determine clr accuracy (G7 Master, Standards Simulatin, and Print Mde Verificatin) Infrmatinal (Custm Image and Named Clr Evaluatin) After either a clr cnsistency r clr accuracy swatch is printed the jb will remain in the queue waiting t be measured with a clr measurement device. Once it is measured then verificatin testing is perfrmed, and the ClrCheck verificatin status fr the print mde is updated. When ClrCheck swatch definitins are created they can be cnfigured with an expiratin time that will flag the print peratr when it is time t reprint and measure the ClrCheck swatch. ClrCheck verificatin is fr infrmatinal purpses nly. Having invalid, expired r nn-existing ClrCheck verificatin will nt prevent jbs frm being printed Baseline Envirnment The baseline swatch envirnment allws fr a set f custm clr patches t be defined alng with user defined ClrCheck validatin tests t be perfrmed n subsets f the patches. The first time that a baseline swatch is printed and measured fr a print mde, the measurements f the patches will be cached as part f the media repsitry t establish the baseline fr any future ClrCheck validatin using that print mde. Figure Example settings fr Baseline envirnment ClrCheck baseline measurements and swatches are tracked n an individual mde basis. Baselines therefre need t be established fr each print mde independently. Thus, they are exprted and imprted as part f exprting and imprting a media. This allws fr baseline measurements t be shared between printers that use the same print mdes t determine hw cnsistently they are printing t ne anther. Page 17

18 Nte: When a new baseline is desired then the Baseline Measurements fr a swatch can be remved frm the Media Library view f the print mde in Media Manager. ClrCheck validatin using baseline swatches can nly be used t assess clr cnsistency because baseline swatch validatin prefrmed against previus measurements frm previus prints f the swatch using the same print mde. Other ClrCheck envirnments shuld be used t check fr clr accuracy G7 Master Envirnment The G7 Master swatch envirnment allws fr evaluatin f calibratin and reprductin f CMYK grayscales relative t G7 grayscale methdlgy advcated by IDEAIlliance. The premise f G7 calibratin is based n the cncept f using a Neutral Print Density Curve t define tne scale with clrimetric balancing f grayscale fr grayscale cmbinatins f CMY. Figure Example settings fr G7 envirnment The G7 Master envirnment has 3 swatch types that crrespnd t G7 Grayscale, Targeted, and Clrspace requirements. The swatches and tests invlved with the G7 Master envirnment evaluate varius aspects f clr reprductin accuracy in the fllwing ways: G7 Grayscale The G7 Grayscale evaluatin swatches evaluate hw well the calibratin, G7 crrectin, r clr management settings achieve NPDC tne scale and gray balance fr printing CMYK utput. When ICC prfiles are nt used then this evaluates hw well the media mdel fr calibratin r the G7 clr crrectin in media manager achieve G7 NPDC grayscale aims fr CMYK printing. When ICC prfiles are used then it prvides an evaluatin f bth the G7 applicability f the input prfile being used alng with the clr accuracy f the print mde s utput prfile. G7 Grayscale is likely the best chice t use fr the purpses f assessing bth accuracy and precisin withut the use f ICC clr management. It des require that the print mde is created in Media Manager with G7 calibratin / crrectin put in place. Page 18

19 G7 Targeted The G7 Targeted evaluatin swatches evaluate hw accurately CMYK primaries and secndaries (slid tw clr cmbinatins) f a reference printing cnditin are simulated in additin t assessing clr management settings used t achieve NPDC tne scale and gray balance fr printing CMYK utput. As mst digital printers have inks with different clr characteristics frm cnventinal press reference printing cnditins, G7 targeted swatches shuld be printed using ICC clr management, and the Input prfile defined in the Quick Set needs t be cnsistent with the reference printing cnditins assciated with the chsen swatch that is printed. Nte 1: Care needs t be made when using G7 targeted evaluatin swatches as invalid prfile cnfiguratin can lead t failure f ClrCheck verificatin. Nte 2: G7 Targeted evaluatin assess hw accurately the print gamut f the input prfile is simulated by the prfile assciated with the print mde. Evaluating accuracy f simulatin is nt necessarily the same as evaluating accuracy f the utput prfile as clrs inside the gamut f the print mde s prfile may nt be inside the gamut f the input prfile G7 Clrspace The G7 Clrspace evaluatin swatches evaluate hw accurately varius printed CMYK values simulate the results f a reference printing cnditin in additin t assessing clr management settings used t achieve NPDC tne scale and gray balance fr printing CMYK utput. As mst digital printers have inks with different clr characteristics frm cnventinal press reference printing cnditins, G7 Clrspace swatches shuld be printed using ICC clr management, and the Input prfile defined in the Quick Set needs t be cnsistent with the reference printing cnditins assciated with the chsen swatch that is printed. Nte 1: Care needs t be made when using G7 Clrspace evaluatin swatches as invalid prfile cnfiguratin can lead t failure f ClrCheck verificatin. Nte 2: G7 Clrspace evaluatin assesses hw accurately the print gamut f the input prfile is simulated by the prfile assciated with the print mde. Evaluating accuracy f simulatin is nt necessarily the same as evaluating accuracy f the utput prfile as clrs inside the gamut f the print mde s prfile may nt be inside the gamut f the input prfile Standards Simulatin Envirnment The Standards Simulatin Evaluatin swatches evaluate hw accurately varius printed CMYK values simulate the results f a reference printing cnditin. Page 19

20 Figure Example settings fr Standards Simulatin envirment Optins fr printing Standards Simulatin swatches allw fr varius tests relative t different internatinal and published standards t be applied relative t hw accurately CMYK values are printed. As mst digital printers have inks with different clr characteristics frm cnventinal press reference printing cnditins, Standards Simulatin swatches shuld be printed using ICC clr management, and the Input prfile defined in the Quick Set shuld t be cnsistent with the reference printing cnditins assciated with the chsen swatch that is printed. Nte 1: Care needs t be made when using Standards Simulatin Evaluatin swatches as invalid prfile cnfiguratin can lead t failure f ClrCheck verificatin. Nte 2: Standards Simulatin evaluatin assesses hw accurately the print gamut f the input prfile is simulated by the prfile assciated with the print mde. Evaluating accuracy f simulatin is nt necessarily the same as evaluating accuracy f the utput prfile as clrs inside the gamut f the print mde s prfile may nt be inside the gamut f the input prfile Print Gamut Verificatin Envirnment Print Gamut Verificatin evaluatin swatches evaluate hw accurately the prfile fr the print mde reprduce clrs that are knwn t be inside the print gamut f the print mde. This is accmplished by dynamically determining clrs inside the print gamut and then using the utput prfile t print thse clrs. Page 20

21 Figure Example settings fr Print Gamut Verificatin envirnment As such Print Gamut Verificatin des nt use the input prfile assciated with the Quick Set, and therefre desn t check whether clr management settings are apprpriate fr simulatin r any ther purpses. It is used t determine whether the print mde prfile characterizes hw the printer actually prints. Nte: Print gamut verificatin can be used t determine if the printer prfile is the cause f ClrCheck validatin errrs simulatin based ClrCheck verificatin Named Clr Evaluatin Envirnment Named Clr Evaluatin swatches allw fr sets f clrimetric r named custm clr patches t be defined t assess hw well a print mde is able t reprduce the clr sets. These clrs are reprduced using the same clr management used when they are printed as part f PDF/EPS/PS dcuments. Figure Example settings fr Named Clr Evaluatin envirnment After measurement the swatch reprt will shw hw clse each f the patches can be printed with verall clr difference statistics. Page 21

22 Nte: This ClrCheck envirnment des nt update r mdify the ClrCheck verificatin status fr a print mde. This ClrCheck envirnment is simply fr generating reprts fr infrmatinal purpses Custm Image Envirnment Figure Example settings fr Custm Image envirnment Custm image swatches allw fr images prvided by 3 rd party clr validatin/verificatin packages t be easily printed under specified Quick Set cnditins. Custm image swatches are nt tracked r measured the same as ther ClrCheck swatches. They need t be separately measured and used within the 3 rd party package invlved. Nte: ClrCheck verificatin status is NOT mdified r updated by Custm Image swatches. Page 22

23 5. ClrCheck Cnfiguratin Onyx ClrCheck Reference Guide 5.1. Intrductin The ClrCheck cnfiguratin manager can be used t create, edit/view, delete, print and exprt/imprt ClrCheck swatches. Figure - Main UI t cnfigure ClrCheck It is intended fr the prductin manager t created pre-defined swatches that are t be used in prcess cntrl peratins in a print shp. With pre-defined swatches created, the print peratr nly has t select frm the pre-defined list. Yu cnfigure ClrCheck swatches by clicking the "Cnfigure ClrCheck" icn n the RIP-Queue tlbar. The main UI f Cnfigure ClrCheck includes Printing Setup, ClrCheck swatches, and several peratins (create, edit/view, delete, print, exprt, and imprt). Yu can setup printing infrmatin (Printer, Media, and Mde) by clicking the gear. Three ClrCheck swatches are predefined (ONYX Weekly Baseline and Named Clr Evaluatin f PANTONE Cated and PANTONE Uncated). Other ClrCheck swatches yu define will als be listed here. The Hide ClrCheck tab when selected will prevent the ClrCheck tab frm appearing in the print cntrl area in Rip-Queue Operatins within the Cnfigure ClrCheck dialg New... This peratin is t add a ClrCheck swatch. The printing setup is listed at the tp fr reference. Page 23

24 Figure Main UI fr peratin New... Onyx ClrCheck Reference Guide Yu first add the swatch name and select the Quick Set t be assciated with this swatch. Then yu can select frm ne f the ClrCheck envirnments t create a swatch definitin fr Add a Baseline swatch: The baseline swatch envirnment allws fr a set f custm clr patches t be defined alng with user-defined ClrCheck validatin tests t be perfrmed n subsets f the patches. Yu can add a new Baseline swatch by chsing Baseline in Select ClrCheck envirnment. Figure Main UI t add a new Baseline swatch By clicking Optins..., yu can chse t use abslute values r media-based substrate crrected values t verify measurement. Figure Optins fr Baseline swatch Page 24

25 Nte: When media-based substrate crrectin is selected, the expected values are adjusted based n the measured media clrs. By checking Verificatin Expiratin, yu can setup expiratin ntificatin time fr a ClrCheck swatch. The Patches tab lists the custmized clr patches that yu want t print and measure n a rutine basis. Each patch has a Patch ID, Patch Type, and Clr Data. Nt all patches in a swatch need t be defined using the same clr space (Patch Type) which can be a named clr (Pantne), Lab, K, RGB, r varius prcess ink clr selectins like CMYK, CMYKR, etc. A clr transfrmatin is perfrmed (as needed) t cnvert each patch t the clr space used by the print mde. If the clr space matches the clr space f the print mde then n transfrmatin is perfrmed. Yu can add, edit, delete, r imprt clr patches by clicking crrespnding buttns in the Patches tab. T add a single patch click the buttn Add.. buttn. Nte: Yu can add different patches by specifying patch type, such as Named clr (Pantne), Lab, K, RGB, and different device clrs (CMYK, CMYKR, etc.). Clr transfrmatin may be needed t print a patch. Fr example, yu want t print a RGB patch r CMYKR patch using a CMYK printer. When yu want edit a patch in the Patches tab, yu just select the patch and click the buttn Edit... The UI t edit a patch is the same as t add ne. Figure 5.4 Add patch fr Baseline swatch Tip: One quick way t set up a swatch with a lt f patches is t imprt patch definitins frm an already existing swatch. When the imprt buttn is pressed it will imprt patches frm SWADEF files. If the drp dwn next t the Imprt... buttn is used then the type f patches and swatch definitin file t imprt frm can be selected. Patches can be imprted frm CGATS files (CMYK, RGB, LAB) r SWADEF files Page 25

26 Figure 5.5 Imprt patches fr Baseline swatch Onyx ClrCheck Reference Guide When yu imprt swatches yu will be asked t find a file that yu wish t imprt patches frm. Useful places t get previusly defined patch definitins are as fllws: Swatches that are defined using the ClrCheck Cnfiguratin dialg are placed in the "Onyx\PCT\SwatchDefs" flder. CGATS files fr the standard definitin files can be fund in the "Onyx\PCT\Standards Simulatin" flder. CGATS files fr G7 can be fund in the "Onyx\PCT\G7 Master flder" Patch identifiers are preserved when patches are imprted frm an existing swatch. Slight changes t the patch identifiers may be made t ensure that each patch identifier is unique. The Test tab lists the set f tests n clr patches in the Patches tab t perfrm after measurement f the swatch during the prcess f swatch validatin. Figure 5.6 Add test fr Baseline swatch All the tests in the list need t succeed in rder fr the swatch being defined t pass validatin. Yu can add, edit, r delete tests by clicking crrespnding buttns in the Test tab. A test is a cmparisn peratin that is perfrmed n ne r mre patches frm the patches tab. A test succeeds if the cmparisn is less than r equal t the threshld assciated with the test. Page 26

27 Yu can add a test t be perfrmed during swatch validatin by clicking the Add.. buttn. Each test has a minimum threshld (value and precisin) that must be achieved fr cnfrmance purpses n subset f patches. Threshlds are used t establish acceptability f printed utput taking int cnsideratin a number f different factrs including (but nt limited t): Nticeability f clr difference Variability in the printing prcess Variability in the measurement prcess The fllwing tests can be used t cmpare measurements f patches in a swatch t previus baseline measurements fr purpses f validatin: Mean DeltaE - used t determine whether the average clr difference (defined using CIEDE2000) is belw a given threshld. In general a DeltaE f less than 2.0 is nt physically discernable Max DeltaE - used t define the limit fr the wrst case clr difference fr the grup f patches assciated with the test. This value shuld generally be larger than a threshld fr a Mean DeltaE Max DeltaE shuld be used t specify the threshld fr a single clr patch PTile DeltaE - a PTile r (Percentile) DeltaE is used t define the limit fr a percentage f the patches assciated with the test that have a clr difference less than r equal t the threshld. When PTile DeltaE is used yu are als prmpted fr the percentage f the patches t use. Tip: Using 95% is equivalent t saying "fr the mst part" r (95% f the time) the maximum clr difference is less than r equal t the threshld. Nte: Generally PTile DeltaE is better t use than Max DeltaE with a large number f patches. Mean DeltaH / Max DeltaH - used t t determine the average / maximum hue variatin (independent f lightness and chrma differences). Max DeltaH is smething that is generally used against single ink clr slids t determine stability/acceptability f the ink. Page 27

28 Mean DeltaC / Max DeltaC - used t determine the average / maximum clr shift independent f differences in lightness. Generally used t asses the neutrality f near neutral clrs. Mean DeltaL / Max DeltaL - used t determine the average / maximum shift in lightness. When a test is created yu select the patches that yu want t perate n and prvide a name fr the grup f patches (like "Slids" r "Custmer Clrs"). Tip: The filter prvides a cnvenient mechanism t quickly find clrs that have specific values fr inclusin in the grup f patches t assciate with a test Fr instance typing in 100 fr the filter shws all the patches that have at least ne ink channel that have 100% ink. Yu can easily select r deselect all patches by clicking buttns Select All r Deselect All when yu want t select the subsets f patches. The fllwing tests and threshlds (Based n ISO ) fr grups are defined fr the Onyx Weekly Baseline: Grup Test Threshld Paper White Max E 3.0 All Patches Mean E 2.5 All Patches Max E 5.0 Near Neutrals Mean Ch 2.0 Near Neutrals Max Ch 3.5 Slids Max E 3.0 Slids Max H Add a G7 Prcess Cntrl Master swatch: Nte: The use f G7 Target and G7 clrspace characterizatin data sets generally relies n clr management input prfiles t be set up in the Quick Set that is applied when swatches are printed. Befre creating Standard Simulatin swatches in ClrCheck cnfiguratin it may be advisable t first create Quick Sets fr each printer with a cmmn name that has the apprpriate input prfile assciated with printing cnditin that will be used by default fr the created G7 based Swatch. Page 28

29 Figure Add a new G7 swatch The G7 Prcess Cntrl Master swatch envirnment allws fr evaluatin f calibratin and reprductin f CMYK grayscales and ther tests relative t G7 grayscale methdlgy advcated by IDEAlliance. Yu can setup ptins by clicking the <Optins...> buttn Figure Optins f G7 swatch Yu can select t use r nt use Clr Management frm Quick Set. Nte 1: When yu check this ptin, the Clr Management setting in Quick Set will be applied, including input prfile, rendering intent, and utput prfile. This is useful fr determining hw well G7 calibratin is accmplished by the clr management prfiles selected in the quick set. Failure may be due t incrrect input prfile selectin (which desn't achieve G7 aims) r by a failure f the printer prfile t get accurate results fr the assciated print mde. Nte 2: When yu uncheck this ptin, the CMYK values in the selected swatch are directly printed withut applying ICC prfiles frm the Quick Set. This is useful fr evaluating G7 crrectin steps applied during prfiling in Media Manager. Yu can chse t use abslute values r media-based substrate crrected values t verify measurement. Page 29

30 Nte: When media-based substrate crrectin is selected, the expected values are adjusted based n the white pint f the assciated utput prfile. The selectin t use Native CMY tlerance allws fr balance f 300% ink cverage fr print mde specific variatins t be accunted fr. This is especially imprtant when a print mde has a significant different clr fr a 300% CMY than fr ffset printing. The final tlerance selectin selects the tlerances t use fr G7 Clrspace assessment. Offset print tlerances are fr day t day printing and prf tlerances are fr assessing G7 fr prfing. By checking <Only display data sets cmpatible with swatch Quick Set>, G7 characterizatin data sets cmpatible with the selected Quick Set are listed with a green check mark next t it. Otherwise, all the G7 characterizatin data sets are listed with green check icn fr thse cmpatible, and red crss icn fr thse nt cmpatible. Crrespnding labels are als displayed with different clrs depending n if yu select a cmpatible r incmpatible data set. When enabling (checking) Reprt Only (N Verify), yu will nly get a reprt fr this G7 swatch and the ClrCheck mde verificatin status will nt be updated. With Verificatin Expiratin yu can setup a time-ut perid befre the G7 ClrCheck swatch is re-printed and re-measured t ensure that printing with the mde is being dne crrectly Add a Standards Simulatin swatch: Tip: The use f Standards Simulatin generally relies n clr management input prfiles t be set up in the Quick Set that is applied when swatches are printed. Befre creating Standard Simulatin swatches in ClrCheck cnfiguratin it may be advisable t first create Quick Sets fr each printer with a cmmn name that has the apprpriate input prfile assciated with printing cnditin that will be used by default fr the created Standards Simulatin Swatch. The Standards Simulatin Evaluatin swatches evaluate hw accurately varius printed CMYK values simulate the results f a cmmn reference printing cnditins, such as IDEAlliance r FOGRA. Page 30

31 Figure Add a new Standards Simulatin swatch Onyx ClrCheck Reference Guide The prcess and ptins fr adding a new Standard Simulatin swatch are similar t the nes fr the G7 Prcess Cntrl Master swatch except f different verificatin tlerance level ptins. Figure Optins f Standards Simulatin swatch Optins fr printing Standards simulatin swatches allw fr varius tests relative t different internatinal and published standards t be applied relative t hw accurately the CMYK values are printed. Yu can setup ptins by clicking Optins..., Yu can select t use r nt use Clr Management frm Quick Set. Nte 1: When yu check this ptin, the Clr Management setting in Quick Set will be applied, including input prfile, rendering intent, and utput prfile. This is useful fr determining hw well the assciated standard is accmplished by the clr management prfiles selected in the quick set. Failure may be due t incrrect input prfile selectin (which desn't achieve aims f the assciated standard) r by a failure f the printer prfile t get accurate results fr the assciated print mde. Nte 2: When yu uncheck this ptin, the CMYK values in the selected swatch are directly printed withut applying ICC prfiles frm the Quick Set. This is nly useful fr evaluating hw clse the print inks and media are t reference printing cnditin Page 31

32 defined by the characterizatin data set. Generally, this is nt the case, and therefre using clr management frm Quick Set is recmmended. Yu can chse t use abslute values r prfile-based substrate crrected values t verify measurement. Nte: When prfile-based substrate crrectin is selected, the expected values are adjusted based n the white pint f the assciated utput prfile. The verificatin tlerance level allws ne t select frm either an ISO based testing standard r a tlerance level fr Large Frmat Printing based n the FgraSpec SystemCheck criteria. Cntract Prf (ISO :2016) / Cntract Prf (ISO :2013): will mstly be used at the end f the creative wrk in the prductin chain. It shws the cnsistency f the data by giving the appearance t be expected when the printer prints accrding t the printing cnditin fr which the data has been separated. Validatin Print ISO ): is used primarily in the creative prcess and reflects a high quality validatin f the prpsed jb cntent. Therefre, a "Validatin Print" is a defined with reprducible quality within the creative phase and nt primarily a clr reliable reference fr the final prductin run Add a Print Gamut Verificatin swatch: Print Gamut Verificatin evaluates hw accurately print mde reprduces clrs that are knwn t be inside the gamut f the print mde. Figure Add Print Gamut Verificatin swatch The prcess and ptins fr adding a new Print Gamut Verificatin swatch is similar t the G7 swatch and Standard Simulatin swatch except f different verificatin tlerance level ptins. Page 32

33 Figure Optins f Print Gamut Verificatin swatch Onyx ClrCheck Reference Guide Three levels are defined (Level A, Level B, and Level C). These three levels have the same tests: mean clr difference f all patches, 95th percentile f all patches, maximum clr difference f all patches, mean chrma difference f gray patches, and maximum chrma difference f gray patches. Hwever, the tlerance is difference. Level A has mst restrictive tlerance and Level C has the least restrictive Add a Named Clr Evaluatin: Named Clr Evaluatin swatches allw fr printed accuracy assessments f custm named clr patches r clrimetricly-defined patches. Figure Add new Named Clr Evaluatin swatch The prcess and ptins fr adding a new Named Clr Evaluatin swatch is similar t the Baseline swatch. Fr example, yu can add, edit, delete r imprt named r CIELAB patches. Figure Add patches t Named Clr Evaluatin swatch Page 33

34 The nly difference between Baseline and Named Clr Evaluatin is that yu d nt have the ptin t custmize tests. The default tests f Name Clr Evaluatin are t calculate clr difference f verall, neutral, highlight, mid-tne and shadw patches. Named Clr Evaluatin is a reprt-nly swatch, which means it will nt update the ClrCheck status f the print mde Add a Custm Image swatch: Custm Image swatches allw fr images prvided by third-party clr validatin/verificatin packages t be easily printed under specified Quick Set cnditins. Figure Add new Custm Image swatch The nly ptin is t brwse t identify the Custm Image file t be printed Cpy... This peratin allws yu t create a swatch as a new cpy. The resulting cpy can be edited even thugh the swatch that was cpied was a read-nly ClrCheck swatch. Figure Cpy Swatch Dialg This allws ne t create custm swatches based upn an existing swatch. One simple example wuld be t make a cpy f the Onyx Weekly Baseline swatch and then add sme additinal named clrs that ne desires t be verified t print cnsistently Edit.../View... This peratin is t view a read-nly ClrCheck swatch r edit a custm ClrCheck swatch. The UI is the same as t add a new ClrCheck swatch fr different ClrCheck envirnments. Page 34

35 Delete This peratin is t delete a custm ClrCheck swatch. Yu cannt delete a read-nly ClrCheck swatch Print... This peratin is t print a selected ClrCheck swatch. Figure Print a ClrCheck swatch Yu have t setup a clr device t measure the printed ClrCheck swatch. Nte: Yu need t be careful when setting up clr device ptins, such as measurement cnditins. These ptins affect clr measurement values f ClrCheck patches. Yu shuld use the same clr device ptins each time yu print a ClrCheck swatch. Yu can setup clr device ptins by clicking the... buttn. Infrmatin fr the ClrCheck swatch t be printed is als listed, which includes swatch name, ClrCheck Envirnment, Characterizatin Data Set, and Verificatin Expiratin. Yu can setup printer infrmatin by selecting Mde and Quick Set. (Nte: Printing a ClrCheck swatch verrides varius settings f a Quick Set including media and mde if they are explicitly set by the Quick Set). Yu can als setup the printing layut, such as page size, cpies, rientatin, label, etc. After yu have made yur selectins, click the Print buttn at the bttm t send the selected ClrCheck swatch t RIP-Queue. When yu g t RIP-QUEUE, yu wuld find the printing jb is in the queue and its status is Waiting t Print if the print setup is apprpriate. Yu can click the buttn Print Nw t print the ClrCheck jb. Page 35

36 Exprt... This peratin is t exprt ClrCheck swatches t an OSL (ONYX Swatch Library) file. Figure Exprt ClrCheck swatches Yu can select the ClrCheck swatches yu want t save Imprt... This peratin is t imprt ClrCheck swatches frm an OSL file. Page 36

37 6. Rip-Queue Usage Yu directly wrk with ClrCheck frm Rip-Queue, including printing, measuring, and validating Print Yu can start t print a ClrCheck swatch frm either the Print Setup tab r the ClrCheck tab in RIP- Queue Print frm Print Setup Tab Click the gear in the Current Media and Page Size sectin t pen the Change Media and Page Size dialg Figure Tab f Print Setup Setup the Media Grup, Media, Page Size Figure Dialg t change Media and Page Size Select a desired Print Mde t run ClrCheck The current ClrCheck status f each mde is listed Click the Print ClrCheck... buttn The Print ClrCheck Swatch dialg will display Page 37

38 Figure Print ClrCheck Swatch Onyx ClrCheck Reference Guide Setup a clr device t measure the printed ClrCheck swatch Nte: Yu need t be careful when setting up clr device ptins, such as measurement cnditins. These ptins affect clr measurement values f ClrCheck patches. Yu shuld use the same clr device ptins each time yu print a ClrCheck swatch. Yu can setup clr device ptins by clicking the... buttn. Select the ClrCheck swatch yu want print Nte: all the ClrCheck swatches are listed, which includes default swatches (ONYX Weekly Baseline, PANTONE Cated, and PANTONE Uncated) and swatches cnfigured in the Cnfigure ClrCheck dialg Yu can select specific printer infrmatin by selecting Mde and Quick Set. Nte: Printing a ClrCheck swatch verrides varius settings f a Quick Set including media and mde if they are explicitly set by the Quick Set. Yu can als setup the printing layut, such as page size, cpies, rientatin, label, etc. After yu have made yur selectins, click the Print buttn at the bttm t send the selected ClrCheck swatch t RIP-Queue In RIP-Queue, the swatch jb's status will be Waiting t Print if the print setup is apprpriate. Yu can click the Print Nw buttn t print the ClrCheck swatch jb Print frm ClrCheck Tab G the ClrCheck tab in RIP-Queue Page 38

39 Figure Tab f ClrCheck Onyx ClrCheck Reference Guide Click the Print ClrCheck... buttn The Print ClrCheck Swatch dialg will display Figure Print ClrCheck Swatch Setup a clr device t measure the printed ClrCheck swatch Nte: Yu need t be careful when setting up clr device ptins, such as measurement cnditins. These ptins affect clr measurement values f ClrCheck patches. Yu shuld use the same clr device ptins each time yu print a ClrCheck swatch. Yu can setup clr device ptins by clicking the... buttn. Select the ClrCheck swatch yu want print Nte: all the ClrCheck swatches are listed, which includes default swatches (ONYX Weekly Baseline, PANTONE Cated, and PANTONE Uncated) and swatches cnfigured in the Cnfigure ClrCheck dialg Yu can select specific printer infrmatin by selecting Mde and Quick Set. Nte: Printing a ClrCheck swatch verrides varius settings f a Quick Set including media and mde if they are explicitly set by the Quick Set. Yu can als setup the printing layut, such as page size, cpies, rientatin, label, etc. After yu have made yur selectins, click the Print buttn at the bttm t send the selected ClrCheck swatch t RIP-Queue In RIP-Queue, the swatch jb's status will be Waiting t Print if the print setup is apprpriate. Yu can click the Print Nw buttn t print the ClrCheck swatch jb Page 39

40 6.2. Measuring & Reprting Measure Onyx ClrCheck Reference Guide This peratin is t measure the clrs f the printed ClrCheck swatch by the clr device specified when printing setup. After yu print a ClrCheck swatch, the status f the swatch jb will be Waiting t Measure. Yu can start measuring by clicking the Measure Swatch buttn t the left, right-clicking the ClrCheck jb and selecting Measure Swatch, r duble-clicking n the swatch jb and clicking the Measure... buttn. Figure ClrCheck jb in Witting t Measure State The Measure ClrCheck Swatch applicatin and the Read Swatch dialg shuld pp up autmatically. If nt, yu can click the Measure... buttn t starting read the ClrCheck swatch. Figure Measure ClrCheck Swatch Fllw the instructins in the Read Swatch dialg t btain the measured clr f the ClrCheck patches. Figure Read Swatch dialg Page 40

41 After measuring the ClrCheck swatch, the Verificatin Results dialg then displays autmatically. The verificatin results first display the printer infrmatin (printer, media and mde). Then, the pass/fail status f the test, ClrCheck swatch name, ClrCheck envirnment, and verificatin expiratin. After that, the results f the verificatin tests, which depend n the ptins and tests cnfigured fr the ClrCheck swatch. Yu can exprt a mre detailed HTML reprt by clicking the Reprt... buttn. Yu can view r exprt the clr readings by clicking the View measurements... buttn Reprt This ptin is t exprt an HTML reprt fr a ClrCheck swatch. The d this, click the Reprt... buttn in the Verificatin Results dialg. The HTML reprt is very similar t the Verificatin Results, except that extra infrmatin, such as patch infrmatin, is included. The patch infrmatin can include patch ID, expected CIELAB values, measured CIELAB values, and clr difference in CIEDE2000. Yu can hide r expand the patch infrmatin by clicking the arrw at the left. Yu can als resrt clumns that have arrws in the headers. This is useful t identify the best and wrst ΔE measurements. An HTML reprt can be printed by printing frm the brwser. The current state f patch hiding and clumn srting is reflected in the print f the HTML reprt Wrking with ClrCheck swatch jbs ClrCheck swatch jbs cexist with ther jbs in RipQueue. They can be nested and printed with ther print jbs with similar print settings. Hwever, after they are printed they will remain in the queue having a Waiting t Measure status. Once measured they mve t the buffered jb queue with a status apprpriate fr the results f swatch validatin r verificatin. Jb prperties fr a swatch jb can be accessed by either duble clicking n the jb, clicking n the Jb Prperties tl n the left f the queue, r selecting the jb and then pressing right click and selecting Jb Prperties. The Reprt/Verificatin Status selectin in the jb prperties dialg fr a swatch jb displays the results f the swatch reprt/verificatin (if perfrmed) and a preview f the swatch. Befre a swatch jb is printed the <Reprt> and <Measure...> buttns are disabled. Figure Jb prperties f swatch jb befre printing After a swatch jb is printed the <Reprt...> buttn is disabled, but the <Measure...> buttn is enabled and when pressed swatch measurements fr the jb will begin. Page 41

42 Figure Jb prperties f swatch jb befre measurement After Measurements are cmpleted the Reprt/Verificatin Status will be filled with relevant details abut the swatch reprt validatin r swatch verificatin. Additinally, yu can exprt a mre detailed HTML reprt by clicking the <Reprt...> buttn, r yu can view r exprt the clr readings by clicking the <View Measurements...> buttn. Figure Jb prpeties f swatch jb after measurement The Inf sectin f the jb prperties dialg fr a swatch jb shws infrmatin abut the swatch jb and allws Ntes t be assciated with the jb. Any changes t the ntes will be shwn in the HTML reprt after they are changed. Figure Inf and ntes fr ClrCheck swatch jb Page 42

43 7. My ClrCheck validatin/verificatin failed Nw What? 7.1. ClrCheck trubleshting checklists A ClrCheck verificatin can fail fr several reasns. The fllwing checklists shuld be cnsidered as part f trubleshting and ptential reslutin f the validatin/verificatin failure: The input prfiles in the Quick Set used t print the swatch are nt cmpatible with the standard being tested Make sure the Quick Set yu are using is cnfigured fr the validatin yu are perfrming (I.E. Fr testing G7, a Gracl input prfile shuld be used) The media white pint is ut f spec fr the simulating standard where there is a test cncerning the media white. The tests include Cntract Prf (ISO :2016), Cntract (ISO :2013), and Prductin Printing (FgraSpec SystemCheck LFP) Level A(Mst Restrictive), Level B, as well as Level C (Least Restrictive) Yu can easily check the clr f media white pint which is the last patch read by the clr device. Tip: Anther media may need t be used, r test using prfile-based substrate crrectin The print mde's ICC gamut is capable f simulating a standard but the print mde's ICC is nt accurate enugh t crrectly reprduce in-gamut clrs. This might be because the printer is nt the same as when the print mde was prfiled Check t make sure yu are using the crrect prfiles fr the print mde yu are using Was the print mde crrectly prfiled fr the media and ink yu are using? Yu can run Baseline t check clr cnsistency f yur printer (assuming baseline exists fr print mde based n prfiled results) If Baseline fails, yu need t check if the printer hardware is having prblems (drpped nzzles, misalignments, etc.) r if the envirnmental factrs surrunding the printer are nt cnducive t getting cnsistent result Ensure the printer is regularly serviced and is prperly cleaned and aligned Printing envirnment (i.e. ambient temperature and humidity) shuld be kept as cnsistent as pssible Caused by pr accuracy f prfile fr print mde Page 43

44 Yu can run Print Gamut Verificatin t check hw accurately the print mde reprduces clrs that are knwn t be inside the gamut f the print mde If Print Gamut Verificatin fails, yu may need t recalibrate yur printer, r reprfile yur printer, r use AccuBst t get a mre accurate prfile. Caused by clr device Make sure settings f clr device are crrect, such as measurement cnditins. Fgra Media Wedge CMYK v3 (72 patches), M0 IDEAlliance ISO Digital Cntrl Strip 2009 (54 patches), M0 IDEAlliance ISO Rw Cntrl Wedge 2013 (84 patches), M1 The clr device used fr clr measurements is nt accurate. If yu have anther clr device (B), yu can use fllwing steps t check if the emplyed clr device (A) is accurate r nt as clr device B.If the clr device yu are using is nt accurate, yu shuld cnsider t certify it if it is nt the case. Exprt clr readings measured by clr device A frm the dialg f Verificatin Status. (View Measurements... --> Exprt) Print the ClrCheck swatch with setting f clr device B Print the ClrCheck swatch jb and take clr measurements by clr device B Exprt clr readings measured by clr device B Cmpare the tw exprted files. The prfile is nt accurate enugh because mre accurate measurements are needed fr the ink separatin that is being used by the ICC prfile Run the AccuBst step in Media Manager which is designed t increase the ingamut accuracy f an ICC prfile. The print mde's ICC gamut is nt capable f simulating a standard Hw t test if the print mde's ICC gamut is capable f simulating a standard r nt? Create a Named Clr Evaluatin swatch in Cnfigure ClrCheck Add patches by imprting the Lab values f the data set f simulated standard Page 44

45 Print the Named Clr Evaluatin swatch with the same clr device and same settings (Measurement Cnditins) Verify the Named Clr Evaluatin swatch and analyze patch by patch. Hw t achieve a better gamut? If yu have fllwed the advised prcedure t maximize the gamut, but yu get a failure verificatin result, that means yu cannt d much fr this printing cnfiguratin. Ink Restrictin step: ink primaries have been set t lw, try t increase it. Ink Limit step: yu chse t minimize the artifacts in high cverage clrs and yu wuld miss sme clrs in the shadws, try t increase the ink limit GCR/UCR: if yu chse a lw max ink, try t increase it. Yu may t switch t a better media, higher reslutin, r re-prfile yur print mde t try t achieve a better gamut Page 45

46 7.2. Baseline trubleshting flwchart Onyx ClrCheck Reference Guide 7.3. G7 Master / Standards Simulatin trubleshting flwchart Page 46

47 7.4. Print Gamut Verificatin trubleshting flwchart Page 47