DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732

Size: px
Start display at page:

Download "DXF2DAT 3.0 Professional Designed Computing Systems 848 W. Borton Road Essexville, Michigan 48732"

Transcription

1 Prgram Infrmatin 1 DXF2DAT 3.0 Prfessinal Designed Cmputing Systems 848 W. Brtn Rad Essexville, Michigan Cntact: (989) website: General Infrmatin: inf@famwrk.net Technical Supprt: supprt@famwrk.net Designed Cmputing Systems assumes n respnsibility fr the imprper use f this sftware r any related damage r injury f equipment r persnnel while using this prgram. Cpyright 2003 Designed Cmputing Systems

2 Technical Supprt 2 Technical Supprt is available by , phne, and Frequently Asked Questin. Users are encuraged t check FAQ prir t trying ther means f technical supprt. We will make every effrt t respnd in less than 24 hurs. Our FAQ web page is updated as new questins are asked. FAQ website: supprt: supprt@famwrk.net Phne supprt: (989) Cpyright 2003 Designed Cmputing Systems

3 Registratin 3 Registratin T register yur prgram and disable the timeut functin, g t Cmplete the registratin frm and yur registratin number will be returned t yu within 24 hurs. Purchase price fr DXF2DAT 3.0 Prfessinal is $45.00 If yu are a registered user f Famwrks 2.1 the purchase price f DXF2DAT 3.0 will be discunted 20% t $36.00 If bth Famwrks 2.1 and DXF2DAT 3.0 Prfessinal are purchased at the same time the same discunt will be applied, fr a ttal purchase price f $81.00 Payments can be may by PayPal (the preferred methd) r by check r mney rder. Send PayPal payments t djmrzinski@chartermi.net Cpyright 2003 Designed Cmputing Systems

4 Features 4 CAD Functins 1. Draw lines, arcs, circles, plylines, ellipse, rectangles 2. Edit / delete entities n the DXF drawing 3. Full Zm functins 4. Add/delete layers fr editing/tracing/mdifying DXF file 5. Plt/Print DXF Imprt functins 1. Lad DXF file 2. Lad DAT file (a crrespnding DXF file is als generated when the DAT file is laded even if yu dn't have the riginal DXF file) 3. Save DXF 4. Save DAT 5. Save DAT file as a DXF file 6. Select scanning device 7. Acquire/scan image int backgrund (scanned images can be used as guidelines fr tracing t create new DXF files) Cnversin functins 1. Explde all Blck entities f the DXF (individual functin) 2. Replace plylines, splines with lines (individual functin) 3. Autmatic Cnversin t DAT with 2 r 4 muse clicks. 2 muse click fr sequentially drawn dxf files and 4 muse clicks fr randmly drawn files. Sequentially draw dxf file Prep DXF (remve blck, plylines, etc) Specify starting pint and cut directin Randmly draw dxf file Prep DXF (remve blck, plylines, etc) Specify starting pint and cut directin Rerganize DXF per step 2 specificatin Cnvert t DAT Cpyright 2003 Designed Cmputing Systems

5 Quick Start 5 Successful creatin f DAT files are directly related t hw the dxf drawing is created. Sequential DXF File: The mst efficient dxf file is ne that is created with fam cutting in mind. A sequential drawing shuld start at the same pint that the fam cutter will use as a starting pint and the drawing shuld be created fllwing the sequence that the fam cutter will fllw while cutting. In ther wrds the first line drawn shuld be the first step fr the fam cutter and the last line draw shuld be the last step fr the fam cutter. The drawing can cntain crssing and verlapping line. DXF2DAT3 will still create the dat file crrectly. If this prcess if fllwed, DXF2DAT3 Prfessinal can cnvert the dxf file t a dat file in just tw steps. The first step remves blcks, and cnverts plyline and spines t lines. The secnd step is the actual cnversin prcess. When this drawing technique is used DXF2DAT3 Prfessinal will perfrm accurately every time. Use nly the plyline and the line tls t create a sequential DXF file. Randm DXF File: A randm dxf file is ne that is created by drawing the desired shape giving n cnsideratin t the fam cutting prcess. Lines and ther dxf file entities (arc, splines, plylines) are drawn in n specific rder. DXF2DAT3 Prfessinal can still create a accurate dat file if the fllwing cnventins are fllwed. Lines shuld nt verlap r crss, care shuld be taken t start the next line f the drawing as clse as pssible t its adjacent line. Lines that run parallel shuld be spaced a small distance a small distance apart. Randm drawing are cnverted in 4 steps. The first step remves blcks, and cnverts plyline and spines t lines. The secnd step sets the starting pint and the directin f the first step f the fam cutting prcess. The third steps is fr DXF2DAT3 Prfessinal t rerganize the drawing based n the starting pint and cut directin selected. The furth step is the cnversin f the dxf file t a dat file. The fllwing sample DXF files are included with the install f DXF2DAT 3.0 Prfessinal. Sequential DXF File: FW_sequence.dxf Randm DXF File: FW_randm.dxf Cpyright 2003 Designed Cmputing Systems

6 Pp Up Menu and Shrtcut Keys 6 Pp Up Menu and ShrtCut Keys Right muse clicking anywhere n the current drawing will pen a pp up menu with many regularly used features like: Sequential file cnversin tls Randm file cnversin tls Select entity tls Zm tls ShrtCut Keys Zm In - using the plus key n the numeric keypad Zm Out - using the minus key n the numeric keypad Zm In - Duble click anywhere n the current drawing. The view will zm in the specified zm factr, centered n the muse click lcatin. Cpyright 2003 Designed Cmputing Systems

7 Creating a Sequential DXF file 7 Sequential DXF File: The mst efficient dxf file is ne that is created with fam cutting in mind. A sequential drawing shuld start at the same pint that the fam cutter will use as a starting pint and the drawing shuld be created fllwing the sequence that the fam cutter will fllw while cutting. In ther wrds the first line drawn shuld be the first step fr the fam cutter and the last line draw shuld be the last step fr the fam cutter. The drawing can cntain crssing and verlapping line. DXF2DAT3 will still create the dat file crrectly. If this prcess if fllwed, DXF2DAT3 Prfessinal can cnvert the dxf file t a dat file in just tw steps. The first step remves blcks, and cnverts plyline and spines t lines. The secnd step is the actual cnversin prcess. When this drawing technique is used DXF2DAT3 Prfessinal will perfrm accurately every time. Use nly the plyline and the line tls t create a sequential DXF file. The fllwing sample DXF files are included with the install f DXF2DAT 3.0 Prfessinal. Sequential DXF File: FW_sequence.dxf Randm DXF File: FW_randm.dxf Cpyright 2003 Designed Cmputing Systems

8 Randm DXF file cnversin prblems 8 Randm DXF File: A randm dxf file is ne that is created by drawing the desired shape giving n cnsideratin t the fam cutting prcess. Lines and ther dxf file entities (arc, splines, plylines) are drawn in n specific rder. DXF2DAT3 Prfessinal can still create a accurate dat file if the fllwing cnventins are fllwed. Lines shuld nt verlap r crss, care shuld be taken t start the next line f the drawing as clse as pssible t its adjacent line. Lines that run parallel shuld be spaced a small distance apart. Randm drawing are cnverted in 4 steps. The first step remves blcks, and cnverts plyline and spines t lines. The secnd step sets the starting pint and the directin f the first step f the fam cutting prcess. The third steps is fr DXF2DAT3 Prfessinal t rerganize the drawing based n the starting pint and cut directin selected. The furth step is the cnversin f the dxf file t a dat file. The fllwing sample DXF files are included with the install f DXF2DAT 3.0 Prfessinal. Sequential DXF File: FW_sequence.dxf Randm DXF File: FW_randm.dxf Cpyright 2003 Designed Cmputing Systems

9 Using Layers 9 Using Layers Layers are ne f the mst pwerful tl prvided with in DXF2DAT. One f the mst useful functin f layers is the ability t create a new layer ver an existing drawing and then using the plyline and line tls, create a new drawing (Sequencial DXF file) n the new layer by tracing the existing drawing. Start the new drawing at the same pint that the fam cutter will use as a starting pint. The drawing shuld be created fllwing the sequence that the fam cutter will fllw while cutting. In ther wrds the first line drawn shuld be the first step fr the fam cutter and the last line draw shuld be the last step fr the fam cutter. The drawing can cntain crssing and verlapping line. DXF2DAT3 will still create the dat file crrectly. Then using the remve ptin in the layers menu, remve all ther layers, leaving nly the layer cntaining the drawing that was traced ver the existing drawing. Using this technique, insures that a sequencial cnversin will create the dat file that exactly fllws the desired cutting path. Cpyright 2003 Designed Cmputing Systems

10 Cnversin Prblems 10 Cnversin failure f a randmly drawn DXF file can ccur fr a number f reasns. Multiple lines drawn ne n tp f anther Lines cnverging t a single pint. Lines verlapping DXF file was drawn using entities unknwn t DXF2DAT Others Cnversin failure is usually indicated by nly a prtin f the drawing regenerating n the screen when the entities are rerganized. When a drawing has failed t cnvert, clse the drawing and relad the riginal DXF file. Attempting t edit a regenerated drawing will nly lead t further prblems. It is very imprtant t save the existing DXF drawing prir t starting the cnversin prcess. During the cnversin prcess the drawing is rerganized and if the drawing fails t cnvert, and the riginal drawing has nt been saved, the riginal drawing will be lst. ALWAYS SAVE PRIOR TO ATTEMPTING CONVERSION Yu have tw ptins when a drawing fails t cnvert. Attempt t edit the drawing either with the drawing tls prvided in DXF2DAT r pen the drawing in yur favrite CAD prgram and try t remve the prtin f the drawing causing the prblem. Often it is mre efficient t simply create a new layer and trace the drawing creating a new sequential DXF file that will cnvert prperly. See Creating a Sequencial DXF Cpyright 2003 Designed Cmputing Systems

11 Menu Bar 11 Menu Bar The Menu bar cntains buttns that allw yu t access tls that can be used while wrking with DXF2DAT. When the muse pinter is placed ver each buttn, a buttn descriptin will be displayed. The buttn, when clicked, will display the currently laded DXF drawing and a crrespnding list f crdinates listed in the Crdinate Listing bx. The buttn, when clicked, will display a drawing that represents the shape described by the crdinates listed in the DAT Listing bx. NOTE: The drawing shwn when the buttn is clicked can nt be edited. This drawing is generated frm the currently listed DAT file. All changes need t be made t the DXF drawing. Cpyright 2003 Designed Cmputing Systems

12 Listings Bxes and Drawing Screens 12 Listing Bxes Tw listing bxes can be displayed, a Crdinate Listing and a DAT Listing. The Crdinate listing is a list f crdinates that crrespnd t the entities f the DXF drawing. This listing will change as the drawing is edited. A 0,0 shwing in the crdinate listing indicates a blck is present. T see all the entities in the blck, Explde the Blck. The nly way t edit the crdinate listing is t edit the DXF drawing. The DAT listing is a list f crdinates that crrespnds t the cnverted crdinates f the DXF drawing, but displayed as a DAT file. The DAT listing is als used t generate the drawing shwn when the buttn is clicked. Drawing Screens The DXF drawing screen is the screen where all editing can take place. All tls are enabled and available fr use. Yu can tggle t the currently laded drawing screen by clicking menu bar. buttn n the The DAT file drawing screen can nt be edited. Mst tls are nt available. Yu can tggle t the currently laded DAT drawing screen by clicking buttn n the menu bar. Cpyright 2003 Designed Cmputing Systems

13 Status Bar 13 Status Bar The Status Bar shw infrmatin abut the current drawing. The first sectin will shw the current X,Y psitn f the muse pinter when it is lcated ver the active drawing. The secnd sectin will list the active layer f the current drawing. The third sectin will shw varius messages based n the functin that is currently active. Fr example, when drawing a line the line f the line is shwn. Cpyright 2003 Designed Cmputing Systems

14 BMP, GIF and JPG files 14 Bitmaps, GIF files and JPG files DXF2DAT 3.0 Prfessinal has the ability t lad bitmaps, gif file and jpg files. These files are laded as backgrund pictures and can nt be edited. The main purpse f lading these type f files wuld be t use as a guide when creating either a randm DXF file r sequential DXF file that will be cnverted t a DAT file. When the DXF file that uses ne f these files as a backgrund is saved, the backgrund is nt included in the DXF file. Cpyright 2003 Designed Cmputing Systems

15 Files 15 Files Menu New DXF File Open - Opens a new blank drawing with the specified maximum x value and the specified y value. Maximum X Value - Opens a dialg bx that allw a new maximum x value t be entered. This value becmes the default until changed. Maximum Y Value - Opens a dialg bx that allw a new maximum x value t be entered. This value becmes the default until changed. Open DXF File - Open an existing DXF file fr editing and cnversin Open DAT File - Open and existing DAT file. As well as pening the DAT file, DXF2DAT will create a crrespnding DXF file that can be saved,edited, r cnverted after editing. This is a very pwerful feature f the prgram. It allws yu t create a DXF file frm any existing DAT file. Open BMP, GIF, JPG File - Open a bitmap, gif file r jpg file and lad the file int the backgrund f the current drawing. This feature allw yu t take any bitmap, gif r jpg file and create a sequential DXF file by trace the backgrund image. Clse - Clses the active DXF file and DAT file Clse All - Clses all DXF files and DAT files that are currently pen. Save Save DXF File - Save the current DXF file. Save DAT File - Save the current DAT file. Save DAT File as DXF File - Save the current DAT file as a DXF file. Page Setup - Enter all plt parameters Plt Preview - View drawing prir t pltting Plt - Plt the current DXF drawing Select Device - Select the input device yu wish t use, a dialg bx shwing all the available devices will be shwn. Select the device yu wish t use and click OK t make the selectin current. Acquire Image - Start the scanning prcess, dialg bxes with the apprpriate prmpts will be displayed. Fllw the instructins given. Exit - Clse DXF2DAT 3.0 Prfessinal Cpyright 2003 Designed Cmputing Systems

16 Edit 16 Edit Menu Delete - Deletes the selected entity r entities Cancel - Cancels the current peratin Cpyright 2003 Designed Cmputing Systems

17 Tls 17 Tls Menu Explde All Blck - Opens all blck within the current drawing and replaces the blcks with the individual entities that make up the blck Replace Plyline with Lines - Replaces all plylines within the current drawing with individual lines. Plyline will be listed in the Crdinate Listing bx as entities with crdinates 0,0. These will be replaced autmatically when the plylines are cnverted. Replace ARCs with Lines - Arcs are replaced with individual line segments that represent the arc. The size f the line segments is determined by the ARC/CIRCLE Cnversin Factr. Fr example a 90 degree arc will be replaced with a 30 lines if the cnversin factr is set t 3 degrees. Replace CIRCLEs with Lines - Circles are replaced with individual line segments that represent the circle. The size f the line segments is determined by the ARC/CIRCLE Cnversin Factr. Fr example a circle will be replaced with a 120 lines if the cnversin factr is set t 3 degrees. Rtate Selected Entities - Rtates the selected entity r entities by the amunt specified. Individual r grups f entities are selected by using the "Select" r "Windw Select" buttn n the Menu Bar Set ARC/CIRCLE Cnversin Factr (degrees) - Sets the default ARC/CIRCLE Cnversin Factr fr all future replacements f ARCs r CIRCLEs Clear Starting Pint - Clear a starting pint that has been selected during the cnversin prcess. Grid - Turn n/ff grids prperties. Cpyright 2003 Designed Cmputing Systems

18 Build DAT 18 Build DAT Frm Sequential DXF File Step 1. Prep DXF fr Cnversin T DAT Step 2. Cnvert DXF t DAT Nw The first step remves blcks, and cnverts plyline and spines t lines. The secnd step cnverts the DXF file t a DAT file. See Creating a Sequential DXF file Frm Randm DXF File Step 1. Prep DXF fr Cnversin t DAT Step 2. Set Cutting Directin/Starting Pint Step 3. Rerganize Entities Step 4. Cnvert DXF t DAT Randm drawing are cnverted in 4 steps. The first step remves blcks, and cnverts plyline and spines t lines. The secnd step sets the starting pint and the directin f the first step f the fam cutting prcess. The third steps is fr DXF2DAT3 Prfessinal t rerganize the drawing based n the starting pint and cut directin selected. The furth step is the cnversin f the dxf file t a dat file. Cpyright 2003 Designed Cmputing Systems

19 Zm 19 Zm Pan - Mve the drawing by the amunt specified by clicking a starting and ending pint n the drawing. Previus - Reverts t the previus zm value displayed. Windw - Zms t the selected windw. The zm windw is specified by clicking a starting pint, releasing the muse buttn and clicking anther pint diagnally frm the starting pint. A windw is displayed t shw the selected limits f the windw being specified. Limits - Zms t the specified limits f the current drawing. Extents - Zms t the maximum x and y value needed t display the current drawing. Zm In - Zms in the specified zm amunt. Shrtcut key is the plus key n the numeric key pad. Zm Out - Zms ut the specified zm amunt. Shrtcut key is the minus key n the numeric key pad Set Zm Value - Sets the zm in and zm ut amunt as a functin f percent. Cpyright 2003 Designed Cmputing Systems

20 Draw 20 Draw Line - Draw a single line n a drawing by clicking a starting and pint and ending pint. Plyline - Draw a plyline n a drawing by clicking a starting pint and click at the next pint f the desired plyline. Cntinue this prcess until the desired plyline is displayed. Cmplete the prcess by clicking the right the muse buttn. Yu will be given the ptin t create a clsed plyline r an pen plyline. Arc - Draw an arc by clicking the pint where yu wish the radius f the arc t start. The secnd pint defines the first pint f the arc and the third pint defines the secnd pint f the arc. The pints are cnnected based n the radius specified. Circle - Draw a circle by clicking n the starting pint r center f the circle. The secnd pint defines the radius f the desired circle. Ellipse - Draw a ellipse by clicking n the starting pint r center f the ellipse. The secnd pint defines the dimensin f the ellipse in ne directin and the third pint defines the dimensin f the ellipse in a secnd directin. Rectangle - Draw a rectangle by clicking the desired starting pint and the clicking a secnd pint diagnally frm the first that defines the desired rectangle. Add Plar Array - Add a plar array t the drawing by clicking the pint where yu wish the plar array t begin, specifying the length f the segments f the array and the number f degrees between the array segments. Plar arrays can be helpful as guides when creating drawing with a specific number f pints. Cpyright 2003 Designed Cmputing Systems

21 Layers 21 Layer Management Add Layer- Adds new layer t the existing drawing. Yu will be asked t select a clr fr the new layer as well. The new layer will autmatically becme the active layer f the drawing. Remve - Remves a layer frm the drawing. Set Active - Set the active layer f the drawing. This will be the layer that cntains all drawing wrk until anther layer is set active. Only ne layer at a time may be active. On / Off - Determines is a layer and its entities are visible r nt. Clse - Clses the Layer Management Dialg Bx and makes all changes current. Cpyright 2003 Designed Cmputing Systems

22 View 22 View Tl Bar - Shws r hides the Tl Bar. Status Bar - Shws r hides the Status Bar. Crdinate Listing - Displays the current DXF drawing and the crrespnding Crdinate Listing Bx DAT File Listing - Displays the current DAT File Listing Bx and the crrespnding shape described by the DAT file. Draw Redraw - Regenerates the current DXF drawing. Cpyright 2003 Designed Cmputing Systems

23 Help 23 Help View Help - Opens the help files. Help files can als be dwnladed by ging t Abut - Displays the versin number and ther infrmatin abut DXF2DAT 3.0 Prfessinal Cpyright 2003 Designed Cmputing Systems

24 Cntact Us 24 Technical supprt and be btained thrugh the fllwing surces: Phne: Website: Address: Designed Cmputing Systems 848 W. Brtn Rad Essexville, Michigan WWW: Mailing lists: Cpyright 2003 Designed Cmputing Systems

Flash Image Rotator Web Part

Flash Image Rotator Web Part Flash Image Rtatr Web Part User Guide Cpyright 2007 Data Springs Inc. All rights reserved. Table f cntents: 1 INTRODUCTION...3 2 INSTALLATION PROCEDURE...4 2.1 After installatin ntes:...5 2.2 Trubleshting...6

More information

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start:

Claim Amalgamation. Getting Started. Amalgamate means to join 2 or more cell claims into one cell claim. Before you start: Claim Amalgamatin Amalgamate means t jin 2 r mre cell claims int ne cell claim. Befre yu start: Yu will need t knw the title numbers f the cell titles fr amalgamatin. If yu are acting as an agent, yu must

More information

CUSTOMER PORTAL. Floorplan Management

CUSTOMER PORTAL. Floorplan Management CUSTOMER PORTAL Flrplan Management FLOORPLAN ANALYTICS The flrplan analytics area displays flrplans yu have uplad t the prtal (if yu haven t yet upladed a flrplan please cntact ur supprt department). Frm

More information

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1

Altis Flight Manager. PC application for AerobTec devices. AerobTec Altis v3 User Manual 1 Altis Flight Manager PC applicatin fr AerbTec devices AerbTec Altis v3 User Manual 1 Table f Cntents Intrductin...3 Requirements...3 Installatin...3 Applicatin...3 USB Driver fr Altis v3 interface ALink...4.NET

More information

Using the Laser Cutter

Using the Laser Cutter Using the Laser Cutter Prerequisites Befre yu will be allwed t use the laser cutter, yu must cmplete these three steps: 1. Yu must have cmpleted the Laser Cutter training at Cyberia 2. Yu must schedule

More information

Excel Step by Step Instructions Creating Lists and Charts. Microsoft

Excel Step by Step Instructions Creating Lists and Charts. Microsoft Infrmatin Yu Can Enter in a Wrksheet: Labels: Any type f text r infrmatin nt used in any calculatins. Labels are used fr wrksheet headings and make wrksheets easy t read and understand. Labels can als

More information

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting

Table of Contents. ilab Solutions: Core Facilities Core Usage Reporting Revisin Date: 12/31/2012 Table f Cntents 1. Institutin, Cre Facility and Lab Administratin Reprting Overview...2 2. Hw d I access ilab Reprts?...3 3. What is the General Functinality fr ilab Reprting?...6

More information

PAPER SPACE AND LAYOUTS

PAPER SPACE AND LAYOUTS PAPER SPACE AND LAYOUTS There are tw distinct wrking envirnments in AutCAD namely: Mdel Space and Paper space. Prjects can be develped by either wrking in the mdel space thrugh the use f MVSETUP r PAPER

More information

1.12 Equipment Manager

1.12 Equipment Manager Mdule 1 Categry 1 1.12 Equipment Manager Functin f the windw The windw is the central data file fr the Kntrl Pr and cllects the main data fr fees f an bject that t be used in this prject. The Equipment

More information

Support Subscribers call

Support Subscribers call Prduced by Cmputer Helper Publishing (CHP). We hpe this sftware makes the tasks f Church administratin easier and mre efficient. Any questins that cannt be answered by these help files shuld be directed

More information

Microsoft PowerPoint 2007

Microsoft PowerPoint 2007 Micrsft PwerPint 2007 Finding Presentatins n the Web Open the Internet and g t http://www.ggle.cm Click n Advanced Search. Enter wrds r phrases t describe desired results. On the File Frmat line, click

More information

Photoshop Elements: Color and Tonal Correction Basics

Photoshop Elements: Color and Tonal Correction Basics Phtshp Elements: Clr and Tnal Crrectin Basics Cntrast Lighten Phtshp Elements: Clr and Tnal Crrectin Basics 1 Sharpen Expsure Phtshp Elements: Clr and Tnal Crrectin Basics 2 Highlights and Shadws All key

More information

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE

TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE TUTORIAL I ECE 555 CADENCE SCHEMATIC SIMULATION USING SPECTRE Cadence Virtus Schematic editing prvides a design envirnment cmprising tls t create schematics, symbls and run simulatins. This tutrial will

More information

The WHO e-atlas of disaster risk for the European Region Instructions for use

The WHO e-atlas of disaster risk for the European Region Instructions for use The WHO e-atlas f disaster risk fr the Eurpean Regin Instructins fr use 1 Last Update: June 2011 Cntents 1. Basic system requirements... 3 2. Structure f the WHO e-atlas... 4 2.1. Main menu... 4 2.1.1.

More information

Puget Sound Company Overview. Purpose of the Project. Solution Overview

Puget Sound Company Overview. Purpose of the Project. Solution Overview Puget Sund Cmpany Overview Puget Sund Energy is Washingtn State s largest and ldest energy utility, serving nearly 1 millin electric custmers and mre than 650,000 natural gas custmers, primarily within

More information

Freading for Kindle Fire Using the SlideME app.

Freading for Kindle Fire Using the SlideME app. Harvard Public Library www.harvardpubliclibrary.rg Freading fr Kindle Fire Using the SlideME app. Freading is an e-bk cllectin, available t Harvard Public Library cardhlders, that ffers tens f thusands

More information

CAR ASYST - Quick Start Guide MAIN MENU

CAR ASYST - Quick Start Guide MAIN MENU fficially apprved by CAR ASYST - Quick Start Guide MAIN MENU Main menu The main menu f ur CAR ASYST APP is divided int 7 menu items. Belw yu will find a list f these items including a shrt descriptin.

More information

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements

AccuBuild Version 9.3 Release 05/11/2015. Document Management Speed Performance Improvements AccuBuild Versin 9.3 Release 05/11/2015 Dcument Management Speed Perfrmance Imprvements The entire dcument management system and security system design was retled which shuld result in majr speed imprvements

More information

Security Exercise 12

Security Exercise 12 Security Exercise 12 Asynchrnus Serial Digital Baseband Transmissin Discussin: In this chapter, yu learned that bits are transmitted ver a cpper wire as a series f vltage pulses (a prcess referred t as

More information

Upgrading to PlanetPress Suite Version 5

Upgrading to PlanetPress Suite Version 5 Upgrading t PlanetPress Suite Versin 5 Creatin date: September 2, 2005 Revisin date: June 14, 2006 Table f Cntents System Requirements... 4 Imprtant Cnsideratins... 4 Knwn Issues... 6 Prcedure t imprt

More information

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR.

NanoScan v2 Readme Version 2.7. Change log. v2.7 - Added information for new product Pyro/9/5-MIR. NanScan v2 Readme Versin 2.7 Change lg v2.7 - Added infrmatin fr new prduct Pyr/9/5-MIR. v2.6 - Redesigned Messages windw. Imprved readability and ease f use. Mves almst all pp up message bxes int the

More information

NanoDrop One/One C Printing

NanoDrop One/One C Printing MARK S100 INSTRUCTIONS NanDrp One/One C NanDrp One/One C Printing Fr use with versin 1.4 f lcal cntrl sftware All Therm Scientific NanDrp One/One C instruments with versin 1.4 f lcal cntrl sftware can

More information

Desktop Teller Exception User Guide

Desktop Teller Exception User Guide Desktp Teller Exceptin User Guide Jammed Dcuments If a dcument jams during the scanning prcess, the scanner will stp, and a message bx will display a Device Errr Message, as shwn belw: Click OK t allw

More information

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software

Manual Zeiss Axio Zoom.V16 microscope and ZEN 2 Pro software Manual Zeiss Axi Zm.V16 micrscpe and ZEN 2 Pr sftware 15-9-2015 Fred Hartjes EMS 3 Caxial illum. Ring illum. Starting up Pwer n Actuate the knb n the EMS 3 cntrl unit Switch n the caxial illuminatin Switch

More information

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL

The UNIVERSITY of NORTH CAROLINA at CHAPEL HILL Yu will learn the fllwing in this lab: The UNIVERSITY f NORTH CAROLINA at CHAPEL HILL Cmp 541 Digital Lgic and Cmputer Design Prf. Mntek Singh Fall 2016 Lab Prject (PART A): Attaching a Display t the Prcessr

More information

COMP 110 INTRODUCTION TO PROGRAMMING WWW

COMP 110 INTRODUCTION TO PROGRAMMING WWW COMP 110 INTRODUCTION TO PROGRAMMING WWW http://cmp110www.web.unc.edu Fall 2011 Hmewrk 3 Submissin Deadline: 10:59 AM, Oct 24 Overview Validating Multiple Chess Mves n a Chessbard Fr this assignment yu

More information

Frequency Response of a BJT CE Amplifier

Frequency Response of a BJT CE Amplifier Frequency Respnse f a BJT CE Amplifier Run the experiment By clicking the arrw n the Tlbar. Chse values f C B & C C, C E & R C frm the crrespnding drp dwn menus. (Clicking the arrw n the right side f the

More information

KIP Cost Center User Guide

KIP Cost Center User Guide - 1 - KIP Cst Center User Guide Cntents 1 Intrductin... 3 1.1 Requirements:... 4 1.2 Supprted Operating Systems... 4 2 Installatin... 5 3 Setup... 8 4 KIP Cst Center Main Screen Print Mde... 12 4.1 Lading

More information

Banner pocket v3 Page 1/7. Banner pocket v3

Banner pocket v3 Page 1/7. Banner pocket v3 Banner pcket v3 Page 1/7 Banner pcket v3 Descriptin Banner pcket will help yu get the printed sheets arranged in the way yu need fr attaching the frnt and back side pckets tgether. It will crp ne sides

More information

Troubleshooting Guide StarFire Satellite Changes

Troubleshooting Guide StarFire Satellite Changes Trubleshting Guide StarFire Satellite Changes This guide is updated t reflect the sftware frm NavCm which is related t the StarFire satellite and frequency changes. The mst recent versin f sftware fr bth

More information

Wonder Tree Video Slot Introduction. How to Bet. Gamble Feature

Wonder Tree Video Slot Introduction. How to Bet. Gamble Feature Wnder Tree Vide Slt Intrductin Wnder Tree vide slt is a 5-reel, 20-line game. The slt cnsists f 11 cards - 1 f which is Wild, and 1 is Scatter. All winning cmbinatins are paid left t right, except fr the

More information

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version

Service Update 7. PaperStream IP (TWAIN x64) for SP Series. change history. Version Version Version PaperStream IP (TWAIN x64) fr SP Series change histry Service Update 7 Versin 1.46.0.5900 Crrected issue: 1. Minr errrs have been mdified. Versin 1.46.0.5775 New feature: 1. SP-1425 is newly supprted.

More information

Photoshop Elements 7 Intermediate: Layout & Design

Photoshop Elements 7 Intermediate: Layout & Design Phtshp Elements 7 Intermediate: Layut & Design Designing a prject... 2 Preparing pictures fr use in a prject... 2 Creating a new blank dcument... 2 Adding a picture(s) t a prject... 2 Turning n the Ruler/Grid...

More information

PaperStream IP (TWAIN) change history

PaperStream IP (TWAIN) change history PaperStream IP (TWAIN) change histry Service Update 6 Versin 1.30.0.5032 Crrected issue: 1. Fixed the defect that Sftware Operatin Panel culd nt functin prperly r culd stp respnding when tw r mre scanners

More information

Configure and Use Bar Tabs

Configure and Use Bar Tabs One Blue Hill Plaza, 16th Flr, PO Bx 1546 Pearl River, NY 10965 1-800-PC-AMERICA, 1-800-722-6374 (Vice) 845-920-0800 (Fax) 845-920-0880 Cnfigure and Use Bar Tabs In rder fr Bar Tabs t wrk a Credit Card

More information

Insert Picture, reduce the size of a Picture and Wrap text around a picture

Insert Picture, reduce the size of a Picture and Wrap text around a picture Insert Picture, reduce the size f a Picture and Wrap text arund a picture Yu can insert pictures frm different places, such as yur cmputer, an nline surce like Bing.cm, a webpage, r a scanned image. Insert

More information

Operating Instructions

Operating Instructions TC 60/8 THERMOCOMPUTER TC 60/8 temp / time s s temp / time k start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing

More information

High Level Design Circuit CitEE. Irere Kwihangana Lauren Mahle Jaclyn Nord

High Level Design Circuit CitEE. Irere Kwihangana Lauren Mahle Jaclyn Nord High Level Design Circuit CitEE Irere Kwihangana Lauren Mahle Jaclyn Nrd 12/16/2013 Table f Cntents 1 Intrductin. 3 2 Prblem Statement and Prpsed Slutin. 3 3 Requirements. 3 4 System Blck Diagram 4.1 Overall

More information

Documentation of the PIC32 Pin Finder

Documentation of the PIC32 Pin Finder App. Versin: 1.1.1.120 Dcument Versin: 1.0 Dcument Create date: 2009-10-16 Dcument Update: 2009-10-19 22:37 Authr: B Gärdmark Cmpany: Spectrn System Develpment AB WEB: www.spectrn.us Cpyright 2009 All

More information

PaperStream IP (TWAIN x64) change history

PaperStream IP (TWAIN x64) change history PaperStream IP (TWAIN x64) change histry Service Update 7 Versin 1.56.1 Crrected issue: 1. Fixed the prblem that scanning failed when using the scanner thrugh PaperStream IP Net. Versin 1.50.0.6382 New

More information

Dispatcher Control for MotoTRBO Capacity Plus Systems

Dispatcher Control for MotoTRBO Capacity Plus Systems Dispatcher Cntrl fr MtTRBO Capacity Plus Systems This tutrial prvides brief instructins t set up the dispatch cntrl ver MtTRBO Capacity Plus systems, using SmartPTT dispatch sftware. Bth cases are cnsidered:

More information

CATA Composer R2016 Fact Sheet. Add a New Dimension to Your Product Communications

CATA Composer R2016 Fact Sheet. Add a New Dimension to Your Product Communications CATA Cmpser R2016 Fact Sheet Add a New Dimensin t Yur Prduct Cmmunicatins Versin 1.0-8/11/2015 Table f Cntents 1. CATIA Cmpser: VALUE AT A GLANCE... 3 2. CATIA Cmpser: Overview... 4 2.1. Immediate Prductivity

More information

MiLAB. Version. User Manual. Copyright 2016 Fourier Education

MiLAB. Version. User Manual. Copyright 2016 Fourier Education MiLAB Versin User Manual Cpyright 2016 Furier Educatin Table f Cntents Intrductin... 4 Installing the Sftware n an ios device... 4 Installing the Sftware n an Andrid device... 4 Multilingual MiLAB... 5

More information

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server.

This app uses callas pdftoolbox server as the imposition engine and consequently you have to have that program installed on your Switch server. Autmatic impsitin Page 1/8 Autmatic impsitin Descriptin Autmatic impsitin will d the mst cmmn impsitins fr yur digital printer. It will autmatically d flders fr A5, A4 r US Letter page sizes in either

More information

SINGER FUTURA TM Holiday Banner

SINGER FUTURA TM Holiday Banner SINGER FUTURA TM Hliday Banner Have fun decking the halls with this festive banner! It s s simple t make the HyperFnt sftware and yur SINGER FUTURA machine. Create the base applique right in yur embridery

More information

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold

PowerCADDTM 5/10/2018. Drawing by James Fleming and Matt Arnold PwerCADDTM Tutrial 5/10/2018 Drawing by James Fleming and Matt Arnld Hw t Read This Dcument This manual is an interactive PDF that acts in sme ways like a bk and als like a prgram, with links that will

More information

Introduction to Life Cycle Risk Management Help Page

Introduction to Life Cycle Risk Management Help Page Select a frequently asked questin (FAQ) t skip t its answer. Hw is the curse rganized? Wh shuld take this curse? Hw d I get credit fr this curse? What d all the navigatin buttns d? Hw d I knw what t click?

More information

Operating Instructions

Operating Instructions TC 40 THERMOCOMPUTER TC 40 start stp Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing the Prgramme

More information

Using the Register of Swiss Surnames

Using the Register of Swiss Surnames Using the Register f Swiss Surnames Switzerland Hw t Guide, Beginning Level: Instructin Octber 2015 GOAL This guide will teach yu t navigate the nline versin f the Register f Swiss Surnames, and hw t utilize

More information

SARMAP RELEASE NOTES. Version: 7.0 (July 2016) rpsgroup.com

SARMAP RELEASE NOTES. Version: 7.0 (July 2016) rpsgroup.com SARMAP RELEASE NOTES Versin: 7.0 (July 2016) 55 Village Square Dr. Suth Kingstwn, RI 02879 Tel: (401) 789-6224 Fax: (401) 789-1932 Email: MapSupprt@ Table f Cntents Table f Cntents...ii 1 Intrductin...

More information

HP LF Printing Knowledge Center

HP LF Printing Knowledge Center HP LF Printing Knwledge Center Hw t print a banner/pster Applicatin: Micrsft Office 2003 Printer: HP Designjet Z6100 series Sftware: HP PS Driver Operating System: Windws 1. First recmmendatins: In rder

More information

Dry Contact Sensor DCS15 User Manual

Dry Contact Sensor DCS15 User Manual Dry Cntact Sensr DCS15 User Manual Help Versin updated till firmware 404i / SP456 Cpyright 2012, AKCess Pr C., Ltd.. Intrductin / What is a Dry Cntact Sensr The Dry Cntact sensr r DCS15 is a simple cnnectin

More information

From Beginner to Expert in 90 Minutes

From Beginner to Expert in 90 Minutes Cmma CMMS Maintenance Management at Yur Fingertips Frm Beginner t Expert in 90 Minutes http://cmmacmms.cm Table f Cntents Intrductin... 3 Frm beginner t expert in 90 minutes... 3 Sessin 1 Set it Up! (5

More information

FOOD SERVICE SOLUTIONS, INC.

FOOD SERVICE SOLUTIONS, INC. FSS Release Ntes Fr installatin, please see ur installatin instructins n the website. Requirements These updates require the custmer t be using versin 4.0.1.14 r later AND Micrsft SQL 2005 r later t be

More information

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons. Order N. : 5323 02 Operating instructins 1 Safety instructins Electrical devices may nly be munted and cnnected by electrically skilled persns. Serius injuries, fire r prperty damage pssible. Please read

More information

Figure 1: A Battleship game by Pogo

Figure 1: A Battleship game by Pogo CSCI 2312-002: Object Oriented Prgramming Final Prject Assigned: Octber 17, 2017 Design Due: Octber 24, 2017 IN CLASS (Graded as ne hmewrk grade) Final prject Due: Nvember 16, 2017 at 11:59 PM Fr many

More information

Introduction. Version 8.2.2

Introduction. Version 8.2.2 Intrductin As with each new versin, minr changes and new ptins are added. Sme f these changes are nt visible because they are designed t imprve functins and crrect sme minr bug. Fr visible changes, please

More information

WAVES: ABBEY ROAD RS56 USER GUIDE

WAVES: ABBEY ROAD RS56 USER GUIDE WAVES: ABBEY ROAD RS56 USER GUIDE TABLE OF CONTENTS Chapter 1 Intrductin... 3 1.1 Welcme... 3 1.2 Prduct Overview... 3 1.3 Abut the RS56... 3 1.4 Cmpnents... 3 Chapter 2 Interface and Cntrls... 5 2.1 Interface...

More information

APPLICATION NOTE Sales & Application DEWESoft Slovenia

APPLICATION NOTE Sales & Application DEWESoft Slovenia Sales & Applicatin DEWESft Slvenia Abstract: This applicatin nte shws a measurement with DEWESft sund pwer measurement system and GRAS 67HA Hemisphere. The bject under test was a standard ntebk, the measurement

More information

Batman & The Penguin Prize

Batman & The Penguin Prize Batman & The Penguin Prize The bjective f Batman & The Penguin Prize is t btain winning symbl cmbinatins by spinning the reels. TO PLAY THE GAME The Batman & The Penguin Prize game can be played in bth

More information

Automatic Number Plate Recognition

Automatic Number Plate Recognition Release Ntes Autmatic Number Plate Recgnitin Versin 14.2.0 Release Ntes Revisin 0 This dcument describes new features and reslved issues fr Autmatic Number Plate Recgnitin 14.2.0. Yu can retrieve the latest

More information

1. Give an example of how one can exploit the associative property of convolution to more efficiently filter an image.

1. Give an example of how one can exploit the associative property of convolution to more efficiently filter an image. CS 376 Cmputer Visin Spring 2011 Prblem set 1 Out: Tuesday Feb 1 Due: Mnday Feb 14 11:59 PM See the end f this dcument fr submissin instructins. Visit us during ffice hurs t discuss any questins n the

More information

Creating Gift Card Batches

Creating Gift Card Batches Every active custmer gift card issued is a part f a batch f gift cards. Prir t activating any individual gift card, yu must define a batch f gift cards and any accmpanying rules that apply t each batch.

More information

TROUBLESHOOTING GUIDE

TROUBLESHOOTING GUIDE TROUBLESHOOTING GUIDE Dcument revisin 1.3 Last revised: December 6, 2017 Recn Wireless Blckage and Flw Mnitr Trubleshting Guide 2014-2017 Intelligent Agricultural Slutins All Rights Reserved. Recn Wireless

More information

Maxon Motor & Motor Controller Manual

Maxon Motor & Motor Controller Manual Maxn Mtr & Mtr Cntrller Manual Nte: This manual is nly fr use fr the Maxn mtr and cntrller utlined belw. This infrmatin is based upn the tutrial vides fund nline and thrugh testing. NOTE: Maximum Permitted

More information

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions

TC 60 THERMOCOMPUTER TC 60. prog. start stop. Operating Instructions TC 60 prg start stp THERMOCOMPUTER TC 60 h C/h C Operating Instructins Cntents General Infrmatin...1 Security Advice...1 Firing Curves...1 Typical Firing Curves...2 Entering a Firing Curve...2 Checing

More information

LED wdali MC Switch Input Modul Set - User Manual

LED wdali MC Switch Input Modul Set - User Manual LED wli MC Switch Input Mdul Set - User Manual Buttn mdul (Transmitter) 1. Prduct Descriptin Item N.: LC-004-302 Receive mdul (Receiver) The wli MC Switch Input Mdul Set is a cmpact wireless Multi Cntrl

More information

IDEXX VetConnect PLUS on the Patient Clipboard displays the latest laboratory results for the current patient:

IDEXX VetConnect PLUS on the Patient Clipboard displays the latest laboratory results for the current patient: Crnerstne* 8.5 NEXT Sftware Release Ntes Befre yu upgrade Cmputer requirements Please check yur cmputer specificatins t get the mst ut f this release. Fr wrkstatins and peer-t-peer servers, we recmmend

More information

Machine Shop Lab Manual GENERAL INSTRUCTION

Machine Shop Lab Manual GENERAL INSTRUCTION Machine Shp Lab Manual GENERAL INSTRUCTION 1. Every student shuld btain a set f instructin sheets entitled manufacturing prcesses Labratry. 2. Fr reasns f safety, every student must cme t the labratry

More information

TABLE OF CONTENTS. Getting Started. pg 3. Initial Start up... pg 4. Setting Quilt Block and Panto Designs.. pg 5. Home Button pg 6

TABLE OF CONTENTS. Getting Started. pg 3. Initial Start up... pg 4. Setting Quilt Block and Panto Designs.. pg 5. Home Button pg 6 USER MANUAL TABLE OF CONTENTS Sectin 1: Getting Started Getting Started. pg 3 Sectin 2: Initial Start-up Initial Start up... pg 4 Setting Quilt Blck and Pant Designs.. pg 5 Sectin 3: Buttn Overview Hme

More information

Ultracom for Apple ios (2.X.X >) Printable user manual

Ultracom for Apple ios (2.X.X >) Printable user manual 30.8.2018 Ultracm fr Apple ios (2.X.X >) Printable user manual Table f cntents 1. General... 3 1.1 General inf... 3 1.2 Ultracm subscriptin and additinal services... 3 1.3 Operatr settings... 3 1.4 General

More information

Software manual. GoPal Navigator Version 5

Software manual. GoPal Navigator Version 5 Sftware manual GPal Navigatr Versin 5 GPal Navigatr Versin 5 Cntents CHAPTER 1: INTRODUCTION... 1 Greeting...1 Cntents f CD/DVD...1 System requirements...3 Cnventins in this manual...3 Tips and warnings...4

More information

SVT Tab and Service Visibility Tool Job Aid

SVT Tab and Service Visibility Tool Job Aid Summary This Jb Aid cvers: SVT Tab Overview Service Visibility Tl (SVT) Area Overview SVT Area: Satellite Mdem Status (Frm Mdem) Clumn SVT Area: Satellite Mdem Status (Frm SMTS) Clumn SVT Area: Prvisining

More information

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo)

Standard Operating Procedure for SEM3 (ThermoFisher / FEI Apreo) Standard Operating Prcedure fr SEM3 (ThermFisher / FEI Apre) Befre beginning, ensure yu have an active reservatin fr SEM3 in CreResearch@Duke Lading a Sample: If Sample Exchange Windw is nt pen, click

More information

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID:

2015 Chevrolet Corvette Corvette Service Manual Body Systems Vehicle Access Repair Instructions Document ID: xtltipelement Service Infrmatin 2015 Chevrlet Crvette Crvette Service Manual 7527625 Bdy Systems Vehicle Access Repair Instructins Dcument ID: 3448513 Remte Cntrl Dr Lck and Theft Deterrent Transmitter

More information

Razor Tracking: User Guide

Razor Tracking: User Guide Cntents 1. Setup Instructins...3 1.1 Administratin...3 GPS Device Inf...3 Peple Management...4 Vehicle Setup (Fleet and Asset Devices)...5 Vehicle Grup Setup...7 Departments...7 Camera Management...8 Public

More information

Super ABC Plug-in kit for Pacman or Ms Pacman

Super ABC Plug-in kit for Pacman or Ms Pacman Super ABC Plug-in kit fr Pacman r Ms Pacman This page is a technical reference fr thse wh wn the SUPER ABC kit manufactured by Tw Bit Scre during the 1990's. This prduct is n lnger available. Under the

More information

SEARCHING PROVINCIAL NETLAW

SEARCHING PROVINCIAL NETLAW SEARCHING PROVINCIAL NETLAW Prvincial NetLaw ffers access t all Acts, Ordinances and Regulatins currently in frce and applicable t all 9 prvinces frm 1910 t date. Each amendment t an Act, Ordinance r Regulatin

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad: Min. 5 kg Max. 100 kg TS1000A TS700A INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main measures. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System

VIP-200. Point to Point Extension Configuration Quick Start Guide. Video over IP Extender and Matrix System VIP-200 Vide ver IP Extender and Matrix System Pint t Pint Extensin Cnfiguratin Quick Start Guide PureLink TM 535 East Crescent Avenue Ramsey, NJ 07446 USA Cntents What is in the bx... 3 Transmitter kit

More information

RS232 Communication Between a Sunny Boy 2500U and a PC. Technical Note

RS232 Communication Between a Sunny Boy 2500U and a PC. Technical Note RS232 Cmmunicatin Between a Sunny By 2500U and a PC Technical Nte Revisin 1.5 July 8, 2003 Kent Sheldn Revisin Histry 1.5 July 8, 2003 Kent Sheldn Cntact update 20830 Red Dg Rad Grass Valley, CA 95945

More information

Lab 1 Load Cell Measurement System (Jan 09/10)

Lab 1 Load Cell Measurement System (Jan 09/10) BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System (Jan 09/10) 1) Test the lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b.

More information

100 Super Hot Video Slot Introduction. How to Bet. Gamble Feature

100 Super Hot Video Slot Introduction. How to Bet. Gamble Feature 100 Super Ht Vide Slt Intrductin 100 Super Ht vide slt is a 5-reel, 100-line fixed game. The slt cnsists f 8 cards - 1 f which is Wild, and 1 is Scatter. All winning cmbinatins are paid left t right, except

More information

idcv Isolated Digital Voltmeter User Manual

idcv Isolated Digital Voltmeter User Manual www.akcp.cm idcv Islated Digital Vltmeter User Manual Help Versin updated till firmware SP446 Cpyright 2011, AKCess Pr Limited Prvided by fficial AKCP-Distributr Didactum https://www.didactum-security.cm/en/

More information

Dry Contact Sensor

Dry Contact Sensor www.akcp.cm Dry Cntact Sensr Intrductin The Dry Cntact sensr is a simple cnnectin t burglar alarms, fire alarms r any applicatin that requires mnitring by the unit. Dry cntact sensrs are user definable

More information

Figure 1: View, connection compartment closed

Figure 1: View, connection compartment closed Radi Management Art. N. : 2700AP Operating instructins 1 Safety instructins Electrical equipment may nly be installed and fitted by electrically skilled persns. Serius injuries, fire r prperty damage pssible.

More information

C9 Trader Service User Guide

C9 Trader Service User Guide C9 Trader Service User Guide JUNE 2017 Cntents 1. Launching the C9 Trader... 2 2. Lgging in t Clud9... 2 3. Clud9 Hme Screen... 3 3.1 Cntrl Panel... 3 3.1.1 Hme Buttn... 3 3.1.2 Cmmunity Buttn... 3 3.1.3

More information

How to Install a Slate Tile Floor By See Jane Drill TM Copyright 2014, All Rights Reserved

How to Install a Slate Tile Floor By See Jane Drill TM Copyright 2014, All Rights Reserved Hw t Install a Slate Tile Flr By See Jane Drill TM Cpyright 2014, All Rights Reserved Resurces Needed t Cmplete the Jb Tls & Supplies Pwer drill with mixing want (a bucket trwel can als be used fr mixing)

More information

Application for Drive Technology

Application for Drive Technology Applicatin fr Drive Technlgy MICROMASTER 4 Applicatin Descriptin Warranty, Liability and Supprt 1 Warranty, Liability and Supprt We d nt accept any liability fr the infrmatin cntained in this dcument.

More information

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E

AIR CONDITIONER REMOTE CONTROLLER ILLUSTRATION CS406-R51E AIR CONDITER REMOTE CONTROLLER ILLUSTRAT CS406-R5E 00550905 0009 Thank yu very much fr purchasing ur air cnditiner. Please read this wner's manual carefully befre using yur air cnditiner. CONTENTS Handling

More information

GANTOM iq AND iqx USER GUIDE

GANTOM iq AND iqx USER GUIDE GANTOM iq AND iqx USER GUIDE The Gantm iq is the wrld s smallest gb prjectr with zm and fcus fr prfessinal lighting applicatins. The Gantm iqx features the same amazing ptics f the Gantm iq but adds integrated

More information

Experiment 6 Electronic Switching

Experiment 6 Electronic Switching Experiment 6 Electrnic Switching Purpse: In this experiment we will discuss ways in which analg devices can be used t create binary signals. Binary signals can take n nly tw states: high and lw. The activities

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Lad with min. 5 kg 405000090 405070090 INSTALLATION INSTRUCTIONS CONTENT: 1. Imprtant safety instructins. 2. Specificatins and main dimensins. 3. Parts included. 4. Installatin. 5. Adjusting the strke

More information

Visualization with VMD

Visualization with VMD Visualizatin with VMD DAVID CHATFIELD, FIU DEPARTMENT OF CHEMISTRY AND BIOCHEMISTRY WORKSHOP ON MACROMOLECULAR MODELING FIU, APRIL 8-9, 2017 Overview Dwnlad pdb file (experimental structure f macrmlecule)

More information

The objective of Man of Steel is to obtain winning symbol combinations by spinning the reels.

The objective of Man of Steel is to obtain winning symbol combinations by spinning the reels. Man f Steel 5-Reel 25-Line Slt The bjective f Man f Steel is t btain winning symbl cmbinatins by spinning the reels. TO PLAY THE GAME The Man f Steel game can be played in bth landscape and prtrait mdes.

More information

PLIC Books School User s Manual

PLIC Books School User s Manual Schl User s Manual is a web based yearbk sftware that lets users, studi r schl, lgin and wrk n their yearbks frm anywhere. is very user friendly and allws users t uplad their wn graphics and images t easily

More information

Lab 1 Load Cell Measurement System

Lab 1 Load Cell Measurement System BME/ECE 386 Lab 1 Lad Cell Measurement System GOALS Lab 1 Lad Cell Measurement System 1) Build and test a lad cell amplifier. 2) Write an Arduin prgram t: a. Acquire data frm a lad cell amplifier b. Cmpute

More information

This Help system requires Internet Explorer 5 or later. It may not be displayed properly by earlier versions of Internet Explorer.

This Help system requires Internet Explorer 5 or later. It may not be displayed properly by earlier versions of Internet Explorer. Intrductin Ntes This Help system requires Internet Explrer 5 r later. It may nt be displayed prperly by earlier versins f Internet Explrer. The appearance f the Wireless Panel sftware screenshts used in

More information

You Be The Chemist Challenge Official Competition Format

You Be The Chemist Challenge Official Competition Format 2018-2019 Yu Be The Chemist Challenge Official Cmpetitin Frmat This dcument prvides detailed infrmatin regarding the Challenge frmat at each level f the cmpetitin. Schl Crdinatrs, participants, and parents/guardians

More information

Dice High Video Slot. Introduction. How to Bet. Gamble Feature

Dice High Video Slot. Introduction. How to Bet. Gamble Feature Dice High Vide Slt Intrductin Hw t Bet Gamble Feature Game Cntrls Rules Dice Feature Jackpt Cards Bnus Game Interruptins Return t Player Intrductin Dice High vide slt is a 5-reel, 20-line fixed game. The

More information