John Deere Devices Module GateKeeper Integration for the GS2 & GS3 displays GateKeeper Version February 2015

Transcription

1 GateKeeper Integratin fr the GS2 & GS3 displays GateKeeper Versin February 2015

2 Cntents Intrductin... 2 Setup... 2 Linking GateKeeper crps with Jhn Deere... 2 Tractr Units... 3 Implements and Settings... 4 Exprting a Wrk Plan t the 2600/2630 displays... 5 Creating a cmbining wrk plan... 5 Creating yur Jhn Deere Device... 7 Imprting Data frm the 2600/2630 displays int GateKeeper Imprting Data frm the data strage device Viewing Imprted Variable Maps Editing Imprted Jb Data Filtering Plt Data Calibrating Yield Data Annexe A GateKeeper Tractr Unit Settings and the Jhn Deere Displays Annexe B Linking GateKeeper and Jhn Deere Crp Types Page 1 f 27

3 Intrductin The Jhn Deere Devices Mdule is an ptinal extra t the GateKeeper system which prvides Jhn Deere cmpatibility with GateKeeper. If applied n its wn, it will supprt basic dcumentatin, with the GS and GS displays. When applied t GateKeeper with the mapping mdule enabled, it will supprt mapping n the displays as well as dcumentatin. The GS display is als cmpatible with GateKeeper but this cmpatibility is limited t integrating with yur Field, Prduct & Machine lists as well as Bundaries and Guidance thrugh the mapping mdule. Setup Linking GateKeeper crps with Jhn Deere The crps that are listed n yur GateKeeper Business list must be linked in with the Jhn Deere equivalent. Un-linked crps will nt be exprted t the displays. On the main GateKeeper screen, click n Setup>Crps and Varieties t bring up the Setup Crps and Varieties windw. The example belw assumes that crps have already been setup. 2. Once the crp is highlighted, there is the ptin t select a Jhn Deere Linked Crp. Tick the bx t activate and scrll dwn the list t find the equivalent crp. 1. Expand the Crp Grup nde and highlight the Crp name underneath. 3. GateKeepers Wheat Winter wuld equate t Jhn Deere s Wheat (Eur Wtr) fr example. Once linked, Save and OK ut f the screen. Annexe B at the rear f this guide cntains a list f GateKeeper crp names listed against the Jhn Deere equivalents fr cmparisn. Page 2 f 27

4 Tractr Units When exprting wrk plans t the 2600/2630 displays, it is pssible t exprt Machinery Settings frm GateKeeper which cnsist f the Tractr Unit settings. The Machine and Implement details n the displays require cmpletin and s string and exprting the settings frm GateKeeper will save time and maintain cntinuity. Nt nly is this imprtant fr traceability purpses but als fr the GPS receiver ffsets. This will be f particular imprtance if yu are mapping field bundaries with the tractr unit. Click n Setup>Tractr Units frm the GateKeeper main screen. Highlight the apprpriate tractr heading frm the Tree view and click Add. The name f the tractr unit, categry and reference will be shwn n the setup screen. Wrk thrugh the Definitin tab in cnjunctin with Annexe A (GPS receiver ffset diagram) at the rear f this guide. NB. If these settings have already been setup n the tractr unit, they can be imprted int GateKeeper and stred against the tractr units settings. Once the tractr name has been entered and Saved, it will be viewable in the Treeview. Highlight the apprpriate tractr heading and the click Add. Wrk thrugh the tractr unit settings in cnjunctin with Annexe A Page 3 f 27

5 Implements and Settings As with the Tractr settings, the Implement details and settings can als be exprted t the displays preventing duble data entry. The Implement settings will hld the details fr the Implement that is t be used in the jb (e.g. Cmbine Header) and is setup thrugh Setup>Implements and Settings n the GateKeeper main screen. The Implement details ensure the crrect wrk recrding and guidance fr the jb. Please refer t yur GS2/GS3 Operatrs Manual. Highlight the Implement type in the tree view r add a new ne by clicking n the Add Implement buttn Wrk thrugh the tabs t enter the relevant implement details. Once the Implement has been setup, settings can be added t it. When an implement is setup, the setting will be Standard as default. Highlight the setting underneath the Implement name and rename if required (e.g. Extensin). Tick bx t allcate a machinery cst t the implement. Brwse the list t find the relevant cst. E.g. Fixed Csts> Machinery Csts> Harvest> Wheat. NB. csts created in Setup>Prducts>Fixed Csts. Page 4 f 27

6 Exprting a Wrk Plan t the 2600/2630 displays Data is exprted t the Jhn Deere Displays and imprted back t GateKeeper via a data strage device. In the case f the GS2 displays, the data strage device is an SD data card. GS3 displays stre the data n a USB stick. This guide will refer t bth f these as data strage devices. Wrk plans created and exprted t the displays fr cmpletin prvide the mst efficient and simple way f recrding field jb data back t GateKeeper. The wrk plan structure is maintained n the displays allwing the peratr t wrk thrugh the plan that was exprted. This allws the recrded data t be imprted back int GateKeeper in a recgnised frmat that ppulates the Field recrds, adjusts Stck and remains easily editable including calibrating Yield data. Wrk plans can be created n GateKeeper and exprted t the 2600/2630 displays fr cmpletin fr a range f peratins, including Drilling, Spreading, Spraying and Harvest. Field Grups, Prduct and Machinery Pick lists (including Tractr units, Implements and settings) can als be exprted t the displays. If a wrk plan has nt been exprted, the GateKeeper pick lists can be used t ppulate a Task that can be imprted int GateKeeper as a new Recrding n the Device Synchrnisatin screen. The wrk plans are exprted nt an SD data card which is inserted int the display unit. The wrked example that fllws will lk at the creatin and exprt f a cmbining wrk plan t the 2600/2630 displays and the cmpleted wrk plan s subsequent imprt back t GateKeeper. Creating a cmbining wrk plan Within the Planning mdule, create a wrk plan relevant fr the task, entering the Name f the plan and then adding a Field Operatins Jb. Yu can have many jbs within a single plan. We wuld recmmend that there shuld be ne crp type and ne farm per jb. Once yu have added the Field Operatins Jb, select the fields n the Field Selectr screen. On the Prduct Selectr screen, add the prduct frm the Primary Output heading fr the crp yu wish t harvest. If the prduct has nt been created, g t Setup> Prducts> Output> Primary Output. Select the Implement t be used n the Implement Setting Selectr screen. When the Implement setting has been highlighted in the Tree view, the details will be displayed n the right hand side f the screen. This will als detail if a machinery cst has been assciated with it (if nt a red cautin warning will appear at the bttm f the page. Assciate a machinery cst by clicking n the Setup Implement Setting buttn, ticking the Use Machinery Cst bx fr the apprpriate setting and brwsing and selecting the apprpriate Fixed Cst> Machinery cst frm the drp dwn list. These csts are setup under the Prducts ptin). Page 5 f 27

7 2. Ensure that a Tractr Unit is selected by ticking the bx and selecting frm the drp dwn list. The 2600/2630 displays require a tractr unit (i.e. cmbine) t have been selected fr the exprt t wrk. 1. Click n the Jb tab t bring up the jb summary infrmatin. Once created, Issue the plan, it can then be exprted t the 2600/2630 displays via the data strage device. This is achieved via the Devices mdule. Page 6 f 27

8 Creating yur Jhn Deere Device Jhn Deere Devices Mdule All precisin farming data is exprted and imprted via the Devices mdule n the GateKeeper main screen. With the Jhn Deere Devices mdule applied, yu will have the ability t exprt wrk plans, bundaries and target maps t the displays and imprt cmpleted wrk plans, bundaries and as applied maps back int GateKeeper. A device can be created t distinguish between different peratrs r machines. This heading allws yu t manage the data that is imprted. This can be f benefit if yu are imprting lts f data. If this is the first time that yu are exprting infrmatin frm GateKeeper t the display, yu will need create a Device in the Devices mdule. Click n the Devices mdule. In the main Tree view, brwse t and highlight the crrect cntrller type (i.e. Jhn Deere GS2 2600). Click n the Add Device buttn at the tp f the page. 1. Click n the Devices mdule 2. Within Devices select the crrect display type frm the tree view 3. Next, click n the Add Device buttn The Device Synchrnisatin screen will appear with a New device name listed under the selected device type. Change the name f the device by vertyping the name in the Name bx. Click Save t display the device name in the Treeview. NB. Yu can have several device names listed under the same type e.g. Cmbine & Sprayer. Each device name will list any imprted peratin details (where applicable) when highlighted in the Treeview n the Device mdule main screen. Click n the Exprt tab. On the Exprt page, wrk thrugh the ptins, cmpleting as required (see screen sht belw). Page 7 f 27

9 1. Exprt Lcatin this will be the path t the data strage device 2. Highlight the Field Grup(s) t be exprted 3. Tick bx t Exprt Field Bundaries 4. Crps t Exprt allws yu t exprt nly fields f certain crps if required. 6. Select the required wrk plan(s) t be exprted by expanding the Issued nde and highlighting 7. Tick the Machinery and Implement exprt ptins as required 8. With all f the relevant ptins selected, click n Exprt 5. Prduct Lists. Exprt the apprpriate Gatekeeper prduct lists t yur display. Once yu click n the Exprt buttn, a Device Synchrnisatin warning ntice will appear n the screen (see belw). Click Yes t cntinue. The Device Exprt Lg screen will be displayed detailing the saved lcatin f the exprted wrk plan. Clse the Exprt Lgs windw t return t the Device Synchrnisatin Page and view the card data. On the main Device Synchrnisatin screen, click n the View Card Data buttn t cnfirm the exprted data. This will list the data that has been written t the data strage device (SD card r USB stick) including Jbs, Fields, Machinery and Implement settings etc. It is recmmended that this is checked befre cmmencing wrk. Page 8 f 27

10 2. On the View Card Setup Data screen, expand the relevant ndes t view the exprted data that has been written t the data strage device. 1. Click n the View Card Data buttn t cnfirm the exprted data. If the data strage device has been ppulated with the crrect data, the exprt prcess is cmplete and yu are ready t lad the data via the data strage device nt the displays. Page 9 f 27

11 Imprting Data frm the 2600/2630 displays int GateKeeper Fllwing n frm the previus sectin where a wrk plan was created and exprted t the 2600/2630 displays fr cmpletin, this sectin fcuses n imprting the cmpleted plan back int GateKeeper. This is the simplest and mst effective way f recrding cmpleted data back int the field recrds. Imprting Data frm the data strage device. First f all, ensure that the data strage device has been remved frm the display and has been inserted int a card/usb reader cnnected t the pc. Click n the Devices mdule. In the main tree view, brwse t and highlight the crrect cntrller type (e.g. Jhn Deere GS2 2600). NB This shuld be the device that the wrk plan was exprted t. Click n the Device Sync buttn. The number f Imprt Optin tick bxes displayed will depend n the type f device the data is being imprted frm. NB. Once set, these are remembered. Select the ptins as required; Preview Imprted Data - allws yu t preview the imprted data in a recrded plan frmat. Each separate plan will be viewed nce imprted Jb maps NOT t be saved - jb data such as field names, prducts, rates etc. will be imprted frm yur Device but any assciated map data will nt. This ptin is Off by default. Mve surce t archive after imprt - the data imprted frm the device is always cpied t an archive flder n yur hard-drive. With this ptin ticked the imprted data is als remved frm the surce data device thus clearing the card fr future use. Data can be re-imprted frm the archive flder if required. Clip jb plts t field bundary - any plts that fall utside the GateKeeper field bundary fr the selected year will be disregarded and therefre nt included in the prcessed map. This ptin is Off by default. Keep all ut f wrk plts - any plts that were recrded when the machine was ut f wrk e.g. travelling between fields will be included within the data fr the selected field. Aut find jb field by bundary - the data being imprted is checked t see if its plts fall within any field bundaries that exist within GateKeeper fr the selected business and year. If a match is fund then that field will autmatically be allcated t the relevant jb data in the Data t Imprt grid within the Imprt tab. This ptin is Off by default. Page 10 f 27

12 Histric yield maps imprt mde allws yu t imprt a yield map t a previusly recrded jb recrd withut quantities being affected. Wrk dne uses utstanding field area uses the field s riginal wrking area. If the recrding is nly fr part f the field, the applied rates will decrease as the field area is based upn riginal field area. Cnversely, recrdings that have an applied area greater than the riginal field area (e.g. Yield map including verlap) will have the rates increased as the applied area decreases t use the riginal field area. Imprt Prduct Matching Mde allws yu t ensure the crrect prducts are recrded by; Using the device (recrded) file prduct matched t the GateKeeper prduct by their name i.e. uses the prduct as recrded n the file. Destinatin (GateKeeper) jb prducts matched by their rder verride the device file prduct names i.e. if imprting the data int a GateKeeper Wrk Plan/Recrding, the prduct in the jb will be used. Use this single selected prduct i.e. switch the imprt prduct t ne frm the drp dwn list that appears when this ptin is activated. Jhn Deere AB lines updates any previusly stred guidance lines ensuring all are stred at the highest accuracy pssible Next, click n the Imprt tab. Select the path t the data using the selectr buttn at the end f the Path bx (the Path is the lcatin f the data n the data strage device). At the tp f the Device Synchrnisatin page, the D nt shw in the imprt grid ptins will prevent either Field Bundaries, Machinery Settings and/r Field Guidance data frm being displayed in the grid. Select as apprpriate. The Data T Imprt grid will list the data t be imprted alng with a summary f their cntents. This will assist in ensuring the crrect data is imprted. There may be ne than data file fr an individual field due t interrupted recrdings. Each data file will be clured and displayed in the Surce Device clumns. The Gatekeeper standard clurs are as fllws; Red - Operatin Jbs Green - Field Bundaries Orange (beige) - Field Features Yellw - Machinery Settings Blue Sampling Page 11 f 27

13 Purple/Pink Field Guidance Wrk acrss the GateKeeper Destinatin clumns as required; Map Preview - With this tick bx selected, click n the Map Preview buttn at the bttm f the page t view the rute f the machine fr the selected data. This tl will allw yu t view part recrdings in rder t imprt them int the same field destinatin r view multiple field recrdings in the same file s that the plts can be allcated t mre than ne field. Selecting multiple data files t be previewed will display the rute cntained within each data file n ne screen in relatin t ne anther. Imprt - T cnfirm that yu wish t imprt data, yu must tick the Imprt bx fr the required data file (rw). Yu may wish t imprt data in small batches, fr example t decrease imprt and prcessing time, t deal with data intended fr a specific Plan r simply t imprt and prcess the data fr ne Crp at a time. Any data files (rws) that d nt have the Imprt bx ticked will nt be imprted when the Imprt buttn is clicked. If yu tick the Imprt bx fr a data file (rw) which des nt have a field name specified in the Field clumn, the Select GateKeeper Destinatin Jb and Field windw will appear, prmpting yu t select the apprpriate field. The clumns beneath the GateKeeper Destinatin heading specify where the imprted data is t be saved t. Mdule - The Mdule within GateKeeper that the data will be imprted t (Recrding r Planning). This will link with the riginal exprted GateKeeper wrk plan. NB. If nt, duble click in the apprpriate rw under the Mdule clumn t bring up the Select GateKeeper Destinatin Jb and Field screen t select the Plan/Recrd the file is t be imprted t. If the field has nt been fund/needs t be changed, brwse t and select the crrect field using the picker buttn n the same screen. Hint: if the data has NOT been recrded int an exprted GateKeeper wrk plan n the cntrl bx, create a wrk plan n GateKeeper and recrd each prduct i.e. Wheat r OSR int a single jb. This will make viewing maps and calibrating data easier. A task that has been created n the display can still be imprted back int GateKeeper as a wrk plan recrding. Plan - The name f the Plan that the data will be imprted t. Jb - The name f the Jb that the data will be imprted t. Page 12 f 27

14 Field - The name f the field that the data will be imprted t. T change the field assigned t the currently selected file (rw), duble click n the field name shwn within the Field clumn. The Field Selectr will appear. Pick the field as required and click OK. NB If the bundary exists in GateKeeper, the imprt ptin Aut find jb field by bundary if ticked will match the Surce Device Field autmatically t a GateKeeper Destinatin Field. The clumns beneath the Surce Device heading are fr infrmatin nly (cannt be edited) and shw infrmatin abut the file created n the Cntrller Device. Click Imprt t imprt and prcess the selected data. If yu have ticked Preview imprted data then a Plan will be created and displayed enabling yu t view and make any changes befre saving. Once the selected data has been imprted it will be remved frm grid and/r mved t the archive flder if the tick ptin was selected. With the selected data imprted, OK ut f the Device Synchrnisatin screen back t the Device mdule hme page. With the device name highlighted in the tree view, the data that has been imprted frm that device will be displayed in the Operatins grid. Duble clicking in the grid will bring up the Planning Recrd Wrk Dne/Recrding Setup screen (depending n the mdule the data was imprted t) where the data can be viewed and edited if required. With the imprt prcess cmplete, a Green Primary Output entry will have been placed within the Fields mdule>operatins grid and als the Planning/Recrding mdule as applicable. Page 13 f 27

15 Viewing Imprted Variable Maps Once imprted, mapping data can be viewed thrugh either Field Recrds (under the peratins tab) r within the Planning/Recrding mdule (depending n hw it was imprted). The easiest way is thrugh Field recrds. Within the Fields mdule, brwse t and select the apprpriate field t be viewed frm the tree view. Click n the Operatins tab and then duble click n the Glbe symbl that will appear in the first clumn in the grid adjacent t the apprpriate jb entry that yu wish t view map data fr. An imprted Yield map displayed against the Primary Output recrding in Field recrds. Duble click n the Glbe symbl t bring up the Yield Map. Page 14 f 27

16 The Field Map screen will appear (see belw) 1. Click n the Jb Data icn t view the jb field list. All fields in the same jb will be viewable (ne advantage f imprting fields int the same plan) 2. Select the Displayed Jb Data type t be viewed n the map including Yield (as plts r cnturs), Relief, Misture and Dry Matter. Page 15 f 27

17 With the Field and Displayed Jb Data chsen, click n the Tls icn. Once the Tls icn is displayed, the Key fr the jb will be displayed. The key can be changed by selecting frm the drp dwn list. A Dynamic key will fit t the lwer and higher values that have been recrded fr the selected field i.e T/Ha. The number f bands indicates the numbers f clurs that will be used fr the key within the dynamic value range. Alternatively, yu are able t create yur wn key thrugh setup>mapping>keys By ticking the Display Data tick bx, yu can mve yur cursr t a pint n the field and the captured infrmatin (plt rate, implement width, misture, dry matter etc) will be displayed. The ther icn ptin n the left hand side f the mapping screen is the Visible Layers icn. Within the Visible Layers ptin, yu can select which layers are visible n the screen and in which rder. The layers include field bundaries, jb data (yield) and als zne grids (sil types etc). The Ggle Earth backdrp brwser can als be selected n as a visible layer. Page 16 f 27

18 Editing Imprted Jb Data Jhn Deere Devices Mdule After imprting a yield jb, it may be necessary t edit the plt data. This culd be due t spurius plt values (e.g. high values due t stnes hitting the mass flw sensr), header verlap (missing a small strip f the crp between nrmal passes) r even where the cmbine speed is slw r fast (headland r shrt wrk). When editing r filtering recrded plt data, the field ttals will remain the same. Plt filter templates can be created in rder fr certain filtering criteria t be applied t ne r mre yield maps. If the yield jb is t be the base fr a variable rate applicatin, filtering any unwanted plts will prevent a variable applicatin plan being based n inaccurate data. The grid generatr will lk t the yield data in the frm f grid cells as ppsed t plts. Filtering Plt Data The field selected fr this example has tw telegraph ples in the middle. Due t the cmbine ging arund the infield bstacles, it has resulted in header verlap and cnsequently the yield intake fr thse plts is lwer. If this data was used fr a variable applicatin as it is, these lw plt readings culd have an adverse bearing n the applicatin rate f the prduct when the grid generatr is applied. Enlarged sectin f the example field with the yield displayed in Actual Plts. The lw yield plts can be seen, shwing where the cmbine has navigated arund the telegraph ples. This has affected the cntur map, indicating areas r pr yield. The same area f the example field with the yield displayed as Filled Cnturs. Page 17 f 27

19 T filter the data: Once the Yield map has been imprted int GateKeeper, duble click n the jb entry within the Fields mdule peratin grid (the jb entry will have a glbe symbl indicating the presence f a map) t bring up either the Recrding/Planning Setup screen (depending n if the map was imprted via the recrding r Planning mdule). Once n the Recrd Wrk Dne screen, click n the Fields tab and Map sub-tab. The yield map will be displayed fr the first field within the jb. Yu will need t g back int the recrding setup f the yield jb t filter the plts. Click n the Map sub-tab n the Field page t bring up the map ptins. Click n the Filter Plts buttn t bring up the Filter Plts screen. Create a new filter by clicking Add Filter and prviding it with a relevant name. The example filter has been named Min-max and verlap discard. Wrk thrugh the page ticking the bxes t initialise the permissible criteria and entering any values where applicable (see screen sht verleaf). The fields t be filtered will be displayed n the left f the screen. Ensure they are highlighted blue t have the filters applied. Click n the Filter Plts buttn at the bttm f the page. This will then apply the filter t all f the plts fr the selected fields. If the resulting filter is nt crrect, click Use All Plts t restre the plts t their riginal recrded state. Page 18 f 27

20 Select t filter plts recrded utside f the field bundary and therefre nt attributed t this field. The Minimum /Maximum rate allw yu t filter ut abnrmally lw/high plts. The maximum plt verlap has been set at 1m. This will remve where the header has verlapped arund the telegraph ple greater than 1m. Highlight the fields t receive the filter Filter Plts buttn. When clicked, a message display infrming hw many plts have been filtered ut. The plts can als be filtered where the speed f the cmbine is either at a minimum r maximum speed, as can the change in speed. The Start f pass delay will remve plts where the cmbine is nt fully in wrk e.g. where the flw f crp thrugh the machine at the start f the pass is nt at capacity A Filter Plts ntice will appear infrming yu f hw many plts have been filtered ut. Click OK and yu will be returned t the Recrding Wrk Dne page. Click n the Field Map buttn t display the filtered yield map. Any plts that have been filtered ut will be displayed n the map as a hllw grey circle. Page 19 f 27

21 Nw the data has been filtered, a variable applicatin map based n this yield data will nt be influenced by the filtered plts. The same enlarged sectin f the example field with the yield displayed in Actual Plts. The lw yield plts arund the telegraph ples have nw been filtered ut. With the plts arund the telegraph ples filtered ut, the cntur map displays the yield ff-take in a mre realistic map. The same area f the example field with the yield displayed as Filled Cnturs with the plts filtered. Page 20 f 27

22 Calibrating Yield Data Within the recrded jb infrmatin, imprted yield data can be calibrated. This may be necessary due t a mre accurate figure cming frm the weigh bridge fr the weight recrded frm an individual recrding, field r fields within the harvest jb. The yield quantities can be adjusted fr individual fields r ttal jb quantities (if mre than ne field was recrded int a jb) either by altering the plt quantity (t/kg) r by adjusting the calibratin factr (Jhn Deere 2600/2630 displays yield imprts nly). T Calibrate the Yield Data: Bring up the cmpleted jb details within the Planning r Recrding mdule (depending n hw the jb was imprted). Brwse t the Fields tab and Map sub-tab. The yield map will be displayed fr the first field within the jb. Click n the Calibrate Jb buttn. Click n the Calibrate Jb buttn. Click n the Map sub-tab n the Field page t bring up the map ptins. On the Calibrate Jb Map Plts screen, the prduct that has been recrded will be displayed alng with the individual recrdings. Page 21 f 27

23 T change the Jb ttal quantity used, click n the New subttal quantity methd ptin and ensure the Update jb ttal quantity used tick bx is selected. Then enter the New subttal quantity figure in the bx prvided. Click Calibrate Plts. The ttal quantity will nw be adjusted and will als affect the stck recrds fr the primary utput. NB. This will autmatically prvide an Adjustment Factr. The Jb ttal used is displayed at the tp f the page. Ensure the New subttal quantity methd is selected. Tick the Update jb ttal quantity used bx. Click n Calibrate Plts. T prvide a new subttal quantity fr individual fields r part field recrdings, select the New subttal quantity methd and then select the field recrdings frm the grid that the new quantity is t be applied t. Enter the new subttal quantity and then select the Update jb ttal quantity used tick bx fr the new subttal t affect the ttal quantity used if applicable. Click the Calibrate Plts buttn. Page 22 f 27

24 The selected fields ttal plt quantity is displayed at the tp f the page and reflects the selected fields. Ensure the New subttal quantity methd is selected. Tick the Update jb ttal quantity used if applicable. Enter the new subttal. Click n Calibrate Plts. T reset the quantities, ensure the Reset t riginal methd ptin is selected, tick the Update jb ttal quantity used tick bx and click Calibrate Plts. Page 23 f 27

25 Annexe A GateKeeper Tractr Unit Settings and the Jhn Deere Displays Yu have the ability t setup yur Tractr Unit Definitin Settings n GateKeeper. When yu exprt t yur data strage device, these Tractr Unit Definitin Settings will be used within Machine Offsets n yur Jhn Deere Displays. Any data already n the data strage device, will be verwritten by exprted data saved in the GateKeeper Tractr Unit Definitin Settings. If yu d nt have anything entered within the Tractr Unit Definitin Settings then the Machine Offsets will be verwritten with zer values and they will have t be re-entered n the displays. Setting up yur Tractr Unit Definitin Settings T setup yur Tractr Unit Definitin Settings s that they are exprted t yur data strage device please fllw these instructins; Within GateKeeper g t the Setup menu (abve all the mdule icns). Within the Setup menu chse Tractr Units. In the tree view n the left, select the Tractr Unit (i.e. yur Cmbine r Tractr) that yu wish t add Settings t. Use the Add buttn t add new Tractr Units as required. The name f the Tractr Unit and its Categry, tgether with any reference will be shwn n the right. Beneath this a Precisin Farming Definitin frame will be displayed. Enter the apprpriate values int the relevant bxes, using the diagram verleaf fr guidance, as fllws; Nn Steering axle The Nn Steering axle defines the Machine Reference pint referred t next Select Frnt (fr example, fr a Cmbine) r Rear (fr example, fr a Tractr) frm the drp dwn list. Machine reference pint abve grund level (m) See Fig (i) in the diagram verleaf. This must always be a psitive value. Receiver distance in frnt f machine centre (m) See Fig (ii) in the diagram verleaf. In the Jhn Deere Display, Machine Offsets windw this is setting B. Use a negative value if the receiver is behind the reference pint, i.e.. Receiver distance right f machine centre (m) See Fig (iii) in the diagram verleaf. In the Jhn Deere Display, Machine Offsets windw this is setting A. Use a negative value if the receiver is left f the reference pint, i.e.. Receiver distance abve machine centre (m) See Fig (iv) in the diagram verleaf. Use a negative value if the receiver is belw the reference pint, i.e.. Page 24 f 27

26 Receiver height abve grund level (m) See Fig (v) in the diagram verleaf. This is calculated by summing the Machine reference pint abve grund level (m) and the Receiver distance abve machine centre (m) and is nt editable. In the Jhn Deere Display, Machine Offsets windw this is setting D. Turn Radius (m) The machine turn radius. Turn sensitivity (JD specific) The turning sensitivity required fr the machine. This is currently nly used fr Jhn Deere and has a default value set f 70. This can be edited. Default hitch type Frm the drp dwn list select the default hitch type fr the machine, i.e. Frnt Three Pint fr a Cmbine r Rear Three Pint fr a Self Prpelled Sprayer. Page 25 f 27

27 Page 26 f 27

28 Annexe B Linking GateKeeper and Jhn Deere Crp Types GateKeeper Crp JD Crp Strage Misture Wheat Winter Wheat (Eur Wtr) 14.50% Wheat (Eur Feed) Wheat (Durum) Wheat Spring Wheat (Hrd Rd Spr) Wheat (Hrd Rd Wtr) Wheat (Sft Rd Wtr) Rape Winter / Rape Spring Rape Seed (E Oil) 8.00% Rape Seed (E Ind) Peas Dried / Pease Vining Peas (Eur) 10-12% Barley Winter Barley (Eur Wtr) 14.50% Barley Spring Barley (Eur Spr) Barley (Eur 6) Oats Winter/Oats Spring Oats (Eur) 12% Maize Grain Crn (Eur) 15% Rye Winter / Rye Spring Rye (Eur) 14.50% Linseed Winter / Linseed Spring Flax >11% Beans Dried Winter / Beans Dried Spring Castr Beans Depends n custmer Edible Beans French Beans Green Beans Harict Beans Lima Beans Navy Beans Red Kidney Beans Sybeans Tick Beans White Beans Lucerne (Alfalfa) Alfalfa N/A Grass Grass Frage N/A Maize Frage Crn Silage N/A Page 27 f 27