DK-Lok UHP Fittings. No.09-01(K) May 2017
|
|
- Delilah Maxwell
- 5 years ago
- Views:
Transcription
1 K-ok UP Fittings No.09-01(K) May 2017
2 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM ong Reducing ee WR ong ross ee WX Socket Wed Short Gand GSS ube dapter Gand G Micro ross ee WMX 05 ong Reducer WR 09 Bind Gand BG 14 Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR Micro Reducer WMR ong bow W Meta Gasket Face-Sea Fittings Short Gand SG ong Gand G uto Butt Wed Short Gand SG uto Butt Wed ong Gand G Mae Gand GM Femae Nut FN Mae Nut MN ap P Pug PG Gasket GK Gasket Retainer GK ong Reducing bow 90 WR ong ee W Socket Wed ong Gand GS Socket Wed Reducing ong Gand GSR Gasket Bind GKB oube Mae Union MU
3 oube Mae Reducing Union MRU 17 Union ross ee X 21 igh Fow Mae Nut MN 24 Bukhead Union BU 17 Mae NP bow M-N 21 ube Fitting to uto Butt Wed onnector W 24 ube Fitting onnector 18 ouping 21 Weded ssemby Fittings ube Fitting Bukhead onnector B 18 igh Fow Fittings Swive Femae Mae Union SFMU 25 Mae NP onnector M-N 18 igh Fow Gand G 22 Swive Femae Union SFU 25 Femae NP onnector F-N 19 igh Fow Reducer R 22 Swive Mae NP onnector SM-N 25 Bukhead Mae NP onnector BM-N 19 uto Butt Wed igh Fow Reducer R 22 Swive Femae NP onnector SF-N 26 ube Butt Wed Bukhead onnector BW 19 igh Fow Bukhead Reducer BR 23 Swive ube Fitting onnector S-N 26 Straight hread O-Ring Sea Mae onnector M-UO 20 igh Fow Union bow 23 Swive bow S 26 Union bow 20 igh Fow Union ee 23 Swive ee S 27 Union ee 20 igh Fow Femae Nut FN
4 Ordering Information K-ok Wed Fittings and Meta Face Sea Fittings are ordered by product code shown beow. U WM S B K-ok UP Fittings Product ype Seeve ength Materia Inner Surface eve Seeve ength Materia Inner Surface eve 4 : 6 : 8 : 12 : 3/4 16 : : mm 100 : 10.0mm 190 : mm S : 316 Stainess Stee : 316 Stainess Stee VR B : B P : P Product ype Micro Fittings Face Sea Fittings WM Micro 90 bow FN Femae Nut WM Micro ee MN Mae Nut WMX Micro ross ee P ap WMB Micro ribow PG Pug WM Micro 45 bow GK Gasket WMR Micro Reducing bow GK Gasket Retainer WMR Micro Reducing ee GKB Gasket Bind WMR Micro Reducer MU oube Mae Union ube Butt Wed Fittings BU Bukhead Union W ong bow K-ok ube Fitting onnector WR ong Reducing bow B K-ok Bukhead ube Fitting onnector W ong ee M-N Mae NP onnector WR ong Reducing ee F-N Femae NP onnector WX ong ross ee BM-N Bukhead Mae NP onnector WR ong Reducer BW BW Bukhead onnector SG Face Sea Fittings Femae Gand M-UO O-ring Sea Mae onnector Union bow G Mae Gand Union ee SG utomatic Femae Gand X Union ross ee G utomatic Mae Gand ouping GM Mae Wed Gand G igh Fow Gand GS GSR Socket Wed ong Gand Socket Wed Reducing ong Gand R R igh Fow Reducer utomatic igh Fow Reducer GSS Socket Wed Short Gand FN igh Fow Femae Nut G ube dapter Gand MN igh Fow Mae Nut BG Bind Gand W ube Fitting to uto Butt Wed onnector 3
5 UP Fitting ean Wed Fittings Pressure Rating he pressure ratings provided in this cataogue are obtained by the cacuation with the aowabe stress of 20,000 psig (1,378 bar) of stainess stee 316 at -20 (-28 ) to 100 (37 according to SM B31.3 and B31.1 code. Pressure derating factors are driven by temperatures greater than 100 (37 ). hey are determined from these pressure code isted in the tabe 1 and in accordance with SM B31.3 and B31.1 code. Mutipy the appicabe pressure rating in this cataogue by the factor in the tabe 1 to determine the working pressure. abe 1. erating Factor Materia SS 316 SS 316 emperature ) erating Factor -20 (-28) ~ 100 (37) 0 0 ~ 200 (93) ~ 400 (204) ~ 600 (315) ~ 800 (426) ~ 1000 (537) Materia Materia 316 Stainess Stee 316 Stainess Stee VR eaning & Packing esignation S Bar stock SM S479 SM 479/276 Forging SM S182 SM 182 Passivation is done in accordance with SM 380, Utra-sonic ceaning in a cass 100 cean room enviroment, impemented with resistivity over 18M.I water after finishing the passivation for precision ceaning. fter ceaning, the product receives doube packaging in a cean room enviroment using anti-static poyethyene bags and high purity nitrogen incusion. Surface Roughness Specif ication Grade esignation Surface eve B B R a : 10 μin Ry : 3.0 μm P P R a : 5 μin Ry : 0.7 μm Feature - ccommodates the miniature tubing system - ows cose parts spacing - Fow capacity to be equivaent to the conventiona big size weding fitting Rounded gde : a edges of the product are rounded for safe handing and to hep prevent damage the other products Materia eat code : marked on the product for easy raw materia traceabiity aser Marking : shows the manufacturer, materia / grade, heat code and process number on the body for easy identification 10 μin. R a and 5 μin. R a are standard surface finish P P BMS For automatic tube butt weding, integra fier ring is provided for proper aignment Sharp and burr-free tube end : Radiused Junction : pockets and entrapment zones in the juction portion are eiminated for a smooth fow transition ccuratey machined diameter dimension conforms to tube diameter For ees, the run ( to ) sha precede the branch( ) For rosses, the run ( to ) sha precede the branch( to ) 4
6 5 ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX U-WM-4 U-WM-6 U-WM-8 3/4 U-WM-12 () in Body ube mm hickness (ube Wa) U-WM-4 U-WM-6 U-WM-8 3/4 U-WM-12 () in Body ube mm hickness (ube Wa) U-WMX-4 U-WMX-6 U-WMX-8 3/4 U-WMX-12 () in Body ube mm hickness (ube Wa)
7 ean Wed Fittings Micro ribow WMB U-WMB-4 U-WMB-6 U-WMB-8 in. () mm hickness (ube Wa) Body ube U-WMB-12 3/ Micro af bow WM U-WM-4 U-WM-6 U-WM-8 U-WM-12 () in. mm 3/4 hickness (ube Wa) Body ube Micro Reducing bow WMR 1 1 U-WMR-6X4 U-WMR-8X4 U-WMR-8X6 U-WMR-12X4 () in. mm (1) in. mm hickness (ube Wa) hickness (ube Wa) Body ube U-WMR-12X6 3/ U-WMR-12X8 6
8 Micro Reducing ee WMR 1 1 U-WMR-6X4 U-WMR-8X4 U-WMR-8X6 U-WMR-12X4 () in mm (1) in mm hickness (ube Wa) hickness (ube Wa) Body ube U-WMR-12X6 U-WMR-12X8 3/ Micro Reduer WMR 1 1 U-WMR-6X4 U-WMR-8X4 U-WMR-8X6 U-WMR-12X4 () in. mm (1) in. mm hickness (ube Wa) hickness (ube Wa) U-WMR-12X6 U-WMR-12X8 3/ ong bow W U-W U-W U-W U-W in. () mm hickness (ube Wa) Body ex 11.1 U-W U-W U-W /4 U-W U-W
9 ean Wed Fittings ong Reducing bow 90 WR U-WR-6X4-190 U-WR-8X4-190 U-WR-8X6-190 U-WR-12X4-190 U-WR-12X6-190 U-WR-12X8-190 U-WR-16X8-190 () in. mm 3/ (1) in. mm hickness (ube Wa) 1.65 hickness (ube Wa) Body ex ong ee W U-W U-W U-W U-W in. () mm hickness (ube Wa) Body ex 11.1 U-W U-W U-W /4 U-W U-W ong Reducing ee WR U-WR-6X4-190 U-WR-8X4-190 U-WR-8X6-190 U-WR-12X4-190 U-WR-12X6-190 U-WR-12X8-190 () in. mm 3/4 (1) in. mm hickness (ube Wa) 1.65 hickness (ube Wa) Body ex U-WR-16X U-WR-16X
10 ong ross ee WX U-WX U-WX U-WX U-WX in. () mm hickness (ube Wa) Body ex 11.1 U-WX U-WX U-WX / U-WX ong Reducer WR 1 U-WR-6X4-190 U-WR-8X4-190 U-WR-8X6-190 U-WR-12X4-190 () in. mm (1) in. mm hickness (ube Wa) hickness (ube Wa) U-WR-12X6-190 U-WR-12X /
11 UP Fitting Meta Gasket Face-Sea Fittings Pressure Rating eaning & Packing pressure rating foow the cacuation as to SM B31.3 Process Pip-ing code and SM B31.1 Power Piping code. he working pressure rating at the room temperature is determined by the materia of gasket and the aowabe temperature range per the materias is isted in abe 2. abe 2. emperature range Part Materia emperature F ( ) Fitting 316 Stainess Stee 316 Stainess Stee VR 1000 (537) Gasket 316 Stainess Stee 1000 (537) Nicke 600 (315) Materia Materia 316 Stainess Stee 316 Stainess Stee VR Gasket esignation S Bar stock SM S479 SM 479/276 Specif ication 316 Stainess Stee S SM 167 Nicke N SM B162 Forging SM S182 SM 182 Passivation is done in accordance with SM 380, Utra-sonic ceaning is performed in a cass 100 enviroment with resistivity over 18M.I water after finishing the passivation for precision ceaning. fter ceaning, a product is doube packed in the cean room using anti-static poyethyene bags where high purity nitrogen incusion. Surface Roughness Grade esignation Surface eve B B R a : 10μin Ry : 3.0μm P P R a : 5μin Ry : 0.7μm Pating he interna surface of the femae-threaded nut are siver pated to hep reduce gaing and reduces the pu-up torque. Note : In the event of the damage or remova of the siver pating, thread gaing may be occur damaging the fitting components and preventing against proper seaing performance. esting R Fittings are rated to a heium eak rate of ess than mbar./sec and tested in accordance with SMI F1-96 and SM B-S. Feature - eak-tight service provided from vacuum to positive pressure appication - Minimized space is needed for instaation and or remova Retainer gasket assemby for easy instaation and remova in the minimized space Surface finish are 10 μin. R a and 5 μin. R a wo hoes are provided for easy eak test here is no virtua eak zone Femae threads are siver-pated to hep reduce gaing and ensure easy ow torque assemby Materia eat code is marked on the product for easy raw materia traceabiity 10
12 Meta Gasket Face-Sea Fittings Short Gand SG U-SG ube () in. mm ead hickness (ube Wa) U-SG U-SG U-SG U-SG U-SG U-SG U-SG U-SG U-SG /4 3/ U-SG U-SG-8X U-SG-8X ong Gand G ead ube () in. mm hickness (ube Wa) U-G U-G U-G U-G U-G U-G U-G U-G U-G U-G /4 3/ U-G U-G-8X U-G-8X
13 Meta Gasket Face-Sea Fittings uto Butt Wed Short Gand SG ube () in. mm ead 1 U-SG U-SG U-SG U-SG U-SG U-SG uto Butt Wed ong Gand G ead ube () in. mm 1 U-G U-G-8X U-G U-G U-G /4 3/ U-G Mae Gand GM ead ube () in. mm U-GM-2 1/ / U-GM-4X U-GM U-GM U-GM U-GM-8X U-GM-12 3/4 3/ U-GM
14 Socket Wed ong Gand GS U-GS-2 1/8 ube () in. mm ead / U-GS U-GS U-GS U-GS-12 3/4 3/ U-GS Socket Wed Reducing ong Gand GSR U-GSR-4X2 U-GSR-8X4 ead ube () in. 1/8 mm Socket Wed Short Gand GSS U-GSS-4 U-GSS ube () in. mm ead
15 Meta Gasket Face-Sea Fittings ube dapter Gand G U-G-4 ube () in. mm ead U-G U-G Bind Gand BG U-BG-2 1/8 ube () in. mm ead /8 U-BG U-BG U-BG-12 3/4 3/ U-BG Femae Nut FN U-FN-2 1/ U-FN U-FN ex U-FN-12 3/ U-FN
16 Mae Nut MN M ex M U-MN-2 1/ /16-24 UNF U-MN /16-18 UNF U-MN /8-14 UNF U-MN-12 3/ UNF U-MN UN ap P ex U-P-2 1/ U-P U-P U-P-12 3/ U-P Pug PG ex U-PG-2 1/ U-PG U-PG U-PG-12 3/ U-PG
17 Meta Gasket Face-Sea Fittings Gasket GK U-GK-2 1/8 U-GK U-GK-8 U-GK-12 3/ U-GK Gasket Retainer GK U-GK U-GK U-GK-12 3/ U-GK Gasket Bind GKB U-GKB-2 1/ U-GKB U-GKB U-GKB-12 3/ U-GKB
18 oube Mae Union MU ead ex U-MU-2 U-MU-4 U-MU-8 1/ U-MU-12 U-MU-16 3/ oube Mae Reducing Union MRU ead ead U-MRU-4x2 1/8 U-MRU-8X4 1 ex Bukhead Union BU 1 ead ex 1 ex U-BU U-BU U-BU-12 3/ U-BU
19 Meta Gasket Face-Sea Fittings 1 ube Fitting onnector B ead ube () B ex 1 ex U--4X2 U--4 U--8X6 U--8 1/ ube Fitting Bukhead onnector B B ead ube () B ex 1 ex 2 ex U-B U-B-8X6 U-B Mae NP onnector M-N ead NP ex U-M4-2N 1/ U-M4-4N U-M8-4N U-M8-6N U-M8-8N U-M12-12N 3/4 3/ U-M16-16N
20 Femae NP onnector F-N ead NP ex U-F4-2N 1/ U-F4-4N U-F8-6N U-F8-8N U-F12-12N 3/4 3/ U-F16-16N Bukhead Mae NP onnector BM-N 1 1 ead NP 1 1 ex 1 ex U-BM4-4N U-BM8-4N ube Butt Wed Bukhead onnector BW 1 ead ube () U-BW U-BW U-BW-12 3/ ex 1 ex 19
21 Meta Gasket Face-Sea Fittings M Straight hread O-Ring Sea Mae onnector M-UO 1 ead 1 ex U-M4-6U U-M8-6U U-M8-10U M 9/16-18 UNF 9/16-18 UNF 7/8-14 UNF Union bow ead ex U U U--12 3/ U Union ee ead ex U--4 U--8 U--12 3/ U
22 Union ross ee X U-X-4 U-X-8 ead U-X-12 3/ U-X ex Mae NP bow M-N ead NP 1 ex U-M4-2N 1/ U-M4-4N U-M8-6N U-M8-8N ouping ex U--2 U--4 U--8 1/ U--12 U--16 3/
23 igh Fow Fittings igh Fow Fittings igh Fow Gand G ead ube () 1 U-G-4X igh Fow Reducer R ead ube () 1 1 ex U-R-4X uto Butt Wed igh Fow Reducer R ead ube () ex U-R-4X
24 igh Fow Bukhead Reducer BR ead ube () 1 1 ex 1 ex U-BR-4X igh Fow Union bow ead ex U igh Fow Union ee ead ex U
25 igh Fow Fittings igh Fow Femae Nut FN ead ex U-FN igh Fow Mae Nut MN ead ex M U-MN /16-18 UNF M ube Fitting to uto Butt Wed onnector W U-W-4X4 ead ube () B ex 1 ex U-W-6X B 24
26 Weded ssemby Fittings Swive Femae / Mae Union SFMU ead ex 1 ex U-SFMU Swive Femae Union SFU 1 U-SFU-4 ead ex 1 ex U-SFU Swive Mae NP onnector SM-N 1 U-SM4-2N ead NP 1/ ex ex U-SM4-4N U-SM8-6N U-SM8-8N
27 Weded ssemby Fittings Swive Femae NP onnector SF-N 1 U-SF4-4N ead NP ex 1 ex U-SF8-6N U-SF8-8N Swive ube Fitting onnector S-N ead ube () B ex 1 ex 2 ex U-S B Swive bow S ead ex U-S
28 Weded ssemby Fittings Swive ee S ead ex U-S
29 UP Fitting Meta Gasket Face-Sea Fittings Weding GW GW Gasket ssemby Wrench ighten 1/8 urn For Stainess Stee & Nicke Gasket urn For opper Gasket od 1/8 ~ urn 28
30 Safe omponent Seection he seection of component for any appications or system design must be considered to ensure safe performance. omponent function, materia compatibiity, component ratings, proper instaation, operation and maintenance remain the soe responsibiity of the system designer and the user. K-ok accepts no iabiity for any improper seection, instaation, operation or maintenance. ead Quartersand Factory 7, Goden root-ro 129beon-gi, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, South Korea e. (82) Fax. (82)
ULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings
UR HIGH PURIY FC S & icro Fit Weld Fittings OGP CH UHP ubes & Pipes Features Provide quick assembly and dismantling of components and tubes. Guarantee high purity leak free service from high vacuum to
More informationUltra High Purity Fittings INDEX
Ultra High Purity ittings INX icro Weld ittings icro Reducer 249P ale Weld land ube dapter 255P 256P askets asket Retainer ssembly 262P icro 90 lbow icro Reducing 90 lbow icro 45 lbow 249P 249P 249P ouble
More informationULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS.
UR HIGH PURIY C S & W IINGS www.unilok.com Weld & etal ace Seal ittings Uni-ok Weld & etal ace Seal () fittings are designed and manufactured as high performance and high purity components by our own know-how
More informationTube Adapter. Double Male Union Double Male Reducing Union Bulkhead Union. Tube Butt Weld Connector. Tube Butt Weld. Bulkhead Connector.
icro Reducer icro 90 lbow icro Reducing 90 lbow icro 45 lbow icro ee icro Reducing ee 05 05 06 ube dapter 12 ale Connector (NP) ale Connector (S) emale Connector (P) 17 ouble ale Union ouble ale Reducing
More informationUltra High Purity WELD & METAL SEAL FITTINGS
Ultra High Purity WED & EA SEA IINGS Weld & etal Seal ittings Weld & etal Seal ittings Ordering Information *Additional configurations available upon request. A S B 4 C G D N E 6 - - P Standard feature
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-5/7K w/amendment 0 Juy 07 SUPERSEDING MIL-DTL-5/7K 0 June 008 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, 0 thru CONTACT POSITIONS,
More informationFORGED WELD FITTINGS
ICRO WD ITTINGS ORGD WD ITTINGS TA AC SA ITTINGS 2 Super Clean itting Series 2 Super Clean itting Series 2 Super Clean itting Series WD ITTINGS & TA AC SA ITTINGS TBW AND TA AC SA ITTINGS components are
More informationIndustrial: Barbed Fittings
Brass Barbed Fittings - Order Today, SHIP TOAY at www.sgopher.o Industria: Barbed Fittings ub-barb Fittings Use with Poyethyene Tubing Eonoia One-piee Copat Reusabe Beaded & Standard Hose Barbs Straight
More informationTUBE FITTINGS INSTRUMENTATION.
UB IINS INSRUMNAION www.uniok.com ube ittings We, Uni-ok corporation, ave distinguised ourseves in te design and manufacturing of a ig performance win errue Compression ube ittings and Instrumentation
More informationHigh Pressure Tube Fittings and Tubing
High Pressure Fittings and ubing A-26 High Pressure Fittings and ubing 60,000 psig (4137 bar) Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea ools and Installation echnical Information
More informationThread Milling Tools
Thread Milling Tools 1 MIING INRODUCTION SOID MIING TOOS ISO HEICA FUTES UN HEICA FUTES NPT HEICA FUTES NPTF HEICA FUTES BSP HEICA FUTES BSPT HEICA FUTES PARTIA PROFIE SINGE TOOTH ISO TEETH 2D ISO TEETH
More informationRectangular-shaped Inductive Proximity Sensor.
71 PHOTOEECTRIC PHOTOEECTRIC IGHT FOW PARTICUAR USE SIMPE MEASUREMENT STATIC CONTRO Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-17 Gossary of
More informationRectangular-shaped Inductive Proximity Sensor. website
785 Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-3 Gossary of terms... P.157~ guide... P.781~ Genera precautions... P.1579~ PHOTO PHOTO IGHT FOW
More informationNX5 SERIES. Compact Multi-voltage Photoelectric Sensor Power Supply Built-in. Multi-voltage photoelectric sensor usable worldwide.
7 Compact Muti-votage Photoeectric SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms / Genera precautions...p.139~ / P.1 seection guide... P.23~ China s CCC mark... P.19 PHOTO
More informationRectangular-shaped Inductive Proximity Sensor GX-F/H SERIES
87 PHOTO PHOTO IGHT FOW PARTICUAR Rectanguar-shaped Inductive Proximity Sensor SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms... P.18~ Sensor seection guide... P.83~ Genera
More informationRadiator Valves. Product Information. It s all at Albion
Radiator Valves Product Information It s all at lbion RT 97 Thermostatic ead Lockable ead Liquid Sensor Frost Setting 6 onforms to EN2 M30 x. Standard onnection Flow nd P 0 S - K 0. 0. 0 00 2000 3000 4000
More informationRacks and Cable Management Products
Racks and Cabe Management Products 79 Wire Management Brackets HeermannTyton provides the most adaptabe and systematic approach for cabe management on reay racks. Offering a compete ine of versatie products,
More informationCOMPRESSION TUBE FITTINGS
PRESSI UBE FIIGS PRESSI UBE FIIGS Since 1956, ASAVA BV has served the worldwide client base with instrumentation solutions. As a result of our tremendous efforts in research and development, Astava continues
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationCX-400 SERIES Ver.2. Compact Photoelectric Sensor. Sensors that are environmentally and user friendly.
77 Compact Photoeectric CX- SERIES Ver. Genera terms and conditions... F-7 seection guide... P.7~ Reated Information MS-AJ / CHX-SC...P.979 / P.98 Gossary of terms / Genera precautions...p.~ / P.8~ Korea
More informationCX-400 SERIES Ver.2. Compact Photoelectric Sensor. Sensors that are environmentally and user friendly.
Compact Photoeectric CX- SERIES Ver. Genera terms and conditions... F- guide... P.~ Reated Information MS-AJ / CHX-SC...P.9 / P.99 Gossary of terms... P.9~ Genera precautions... P.~ Korea s S-mark... P.6
More informationCX-400 SERIES Ver.2. Compact Photoelectric Sensor. Sensors that are environmentally and user friendly.
9 Compact Photoeectric Reated Information CX- SERIES Ver. Genera terms and conditions... F-7 seection guide... P.8~ MS-AJ / CHX-SC...P.99 / P.9 Gossary of terms / Genera precautions... P.59~ / P.5 Korea
More informationUniversal pliers. Flat-bladed pliers. Semi-round-bladed pliers. Pliers with curved semi-round blades PLIERS TOOLS. L mm DESC. CODE.
PIERS TOOS Universal pliers HANDES IN BICOMPONENT PASTIC MATERIA (TPE). MODE FOR SOFT AND HARD WIRE. ESPECIAY ONG CUTTING EDGE FOR ROUND AND FAT CABES WITH SUPPEMENTARY TEMPERING UP TO 60HRC. SPECIA CARBON
More informationC A T A L O G S E R I E S 1. Compression Fittings for HDPE and PEX Pipes CTS, IPS Dimensions W W W. I N N O V AT I O N S. C O M.
C A T A L O G S R I S 1 Compression Fittings for DP an PX Pipes CTS, IPS Dimensions W W W. I N N O V AT I O N S. C O M. M X P a s s o n S e r i e s 1 Passon Series 1 - The new range of innovative fittings
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationMODEL: M2CEC MODEL: M2CEC-[1][2][3]-[4][5]
Super-mini Signa Conditioners Mini-M Series AC CURRENT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on type
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More informationD-Pak TO-252AA. I-Pak TO-251AA. 1
Utra Low On-Resistance Surface Mount (IRFR3303) Straight Lead (IRFU3033) Advanced Process Technoogy Fast Switching Fuy Avaanche Rated Lead-Free Description G IRFR3303PbF IRFU3303PbF HEXFET Power MOSFET
More informationThread and End Connection
www.swagelok.com and End Connection I d e n t i f i c a t i o n G u i d e Contents Introduction and End Connection Terminology.. 4 General Terminology................... 5 Step-by-Step Identification
More informationCTC CT TRANSMITTER. (clamp-on current sensor) BEFORE USE... POINTS OF CAUTION INSTRUCTION MANUAL MODEL CTC
INSTRUCTION MANUA CT TRANSMITTER (camp-on current sensor) MODE CTC CTC BEFORE USE... Than you for choosing M-System. Before use, chec the contents of the pacage you received as outined beow. If you have
More informationMODEL: M5CTC SEN TRONIC AG
MODE: M5CTC Super-mini Termina Boc Signa Conditioners M5-UNIT CT TRANSMITTER (camp-on current sensor) Functions & Features Converts an aternating current into a standard process signa Easy-to-insta camp-on
More informationDUCT CHAMPION CONTENTS
Champion Fiberglass, Inc. is the leading manufacturer of fiberglass conduit, strut and bridge hangers for electrical and mechanical markets. Champion Fiberglass, began production of epoxy fiberglass conduit
More informationStorage Temperature Range Soldering Temperature, for 10 seconds 300 (1.6mm from case )
Logic-Leve Gate Drive Utra Low On-Resistance Surface Mount (IRLR2705) Straight Lead (IRLU2705) dvanced Process Technoogy Fast Switching Fuy vaanche Rated Lead-Free Description Fifth Generation HEXFETs
More informationMade in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS
Made in USA Valves VALVES FOR INSTRUMENTATION & PROESS SYSTEMS SSP Fittings orp. Table of ontents FloLok Product Overview... 3 FloLok Selection Guide... 11 Two-Way Ball Valves... 12 Three-Way Ball Valves...
More informationGeneral terms and conditions... F-7 Glossary of terms / General precautions... P.1455~ / P panasonic.net/id/pidsx/global
9 Digita Sensor FX- SERIES Reated Information Genera terms and conditions... F-7 Gossary of terms / Genera precautions... P.455~ / P.5 Sensor seection guide... P.3~ seection... P.5~ PHOTO PHOTO IGHT FOW
More informationMethod of Build. ORBIS Single Glazed. Komfort Installation KOMFORT
KOMFORT WORKSPACE Orbis singe gazed - a muion free crysta cear dry vertica jointed system with square auminium sections Method of Buid Komfort Instaation Love the space you re in. June 2012 Index Section
More informationMethod of Build. Kameo 75. Love the space you re in.
Kameo 75 - a 75mm radius edge trim system in a stee stud and pasterboard construction with pre-assembed window frames Kameo 75 Method of Buid Love the space you re in. Kameo-75 - partitioning system Method
More informationMODEL: LTWT. Power Transducer Series LT-UNIT
Power Transducer Series T-UNIT WATT TRANSDUCER Functions & Features Proides a DC output signa and a puse totaizer signa in proportion to AC actie power Conenient puse unit output (Wh 10 n ) Measuring bidirectiona
More informationNAVSEA STANDARD ITEM T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods
NAVSEA STANDARD ITEM ITEM NO: 009-48 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Pressure Seal Bonnet Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2. T9074-AS-GIB-010/271,
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Pease v isit our website for pricing and avaiabiity at www.hest ore.hu. Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 75 C
More informationAFB (AIR FAN BEARING) INSTALLATION GUIDE
654 AFB (AIR FAN BEARING) INSTALLATION GUIDE AFB PARTS Bearing Housing - Secured together with two 3/8 x 1.25 in. Cap Screws Black Wiper Seals - Secured together with O-ring cord (Subsequently depicted
More informationSERVICE MANUAL CLINTON FEED OFF THE ARM CHAIN CUTTER WITH EXTERNAL AIR DRIVE MODEL 2115FOTA-V FOR UNION SPECIAL 35800, & YAMATO FD-62 ML2115-7A
ML2115-7A CLINTON FEED OFF THE ARM CHAIN CUTTER WITH EXTERNAL AIR DRIVE MODEL 2115FOTA-V FOR UNION SPECIAL 35800, 36200 & YAMATO FD-62 SERVICE MANUAL 40-0164-01 ML2115-8E I. GENERAL INFORMATION A. The
More informationConduit Assemblies. Complex Assembly - FLEXAquick System
ccessories Conduit ssemblies Conduit ssemblies Complex ssembly - FLEXquick System 236 Conduit ssemblies Simple ssembly Finished Products ccessories Conduit ssemblies 237 ccessories Conduits Conduits Straight
More informationMODEL: R3-WT4B. SPECIFICATIONS OF OPTION: Q COATING (For the detail, refer to M-System's web site.) Remote I/O R3 Series
MODEL: R-WTB Remote I/O R Series AC POWER MODULE ( input circuits, camp-on current sensor type CLSB use). (.) (.) (.) mm (inch) MODEL: R-WTB[][][][] ORDERING INFORMATION Code number: R-WTB[][][][] Specify
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationPLAY HOUSE IMPORTANT
IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationAssembly Instructions. JPM-1 Just Pure Magic Adjustable Printer Stand
Assemby Instructions JPM-1 Just Pure Magic Adjustabe Printer Stand Just Pure Magic Printer Stand JPM-1 Part Drawing Description Qty Leg Frame 2 EA Part Drawing Description Qty Hardware List A Fat Head
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationHEXFET Power MOSFET V DSS = 40V. R DS(on) = 4.0mΩ I D = 160A
Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching Fuy Avaanche Rated Lead-Free Description Seventh Generation HEXFET power MOSFETs from Internationa
More informationAdjustable Range Reflective Photoelectric Sensor.
97 SER PHOTOEECTRIC PHOTOEECTRIC djustabe Range Refective Photoeectric EQ-3 SERIES Reated Information Genera terms and conditions...p. Gossary of terms...p.983~ seection guide...p.~ / P.9~ Genera precautions...p.98~
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationPortable ultrasonic flow measurement of gas and liquids in hazardous areas
Technica specification Portabe utrasonic fow measurement of gas and iquids in hazardous areas Portabe instrument for non-invasive, quick utrasonic fow measurement with camp-on technoogy for a types of
More information10 CTN 5 BDL 3 WF 1 SKID 1 SLIDE 20 TOT. PCS. 1067# TOT. WT. Class 70
Page 1 of 7 * IMPORTANT * PLEASE RETAIN THIS INSTRUCTION SHEET IN YOUR FILES. IT CONTAINS IMPORTANT REPLACEMENT PARTS INFORMATION. ALL EQUIPMENT SHOULD BE INSTALLED IN ACCORDANCE WITH THESE INSTRUCTIONS.
More informationKGD for Automatic Lathe
Cutoff KGD Cutoff tool KGD for Automatic athe The World s Thinnest! Edge widths are available from 1.3mm Excellent chip control due to new PF/ PQ Chipbreaker Improved insert clamping force generated by
More informationPilkington K Glass Range Pilkington K Glass Pilkington K Glass OW Pilkington K Glass OW on Surface 4 Pilkington K Glass S
Pikington K Gass Range Pikington K Gass Pikington K Gass OW Pikington K Gass OW on Surface 4 Pikington K Gass S Upstairs windows using energy-efficient gazing. Downstairs windows using origina singe gazing.
More informationDRILLING & WORKING TOOLS
EAGLE EQUIPMENT SUPPLIES & SERVICES PTE LTD 48 Toh Guan Road East #06-107 Enterprise Hub, Singapore 608586 Tel : (65) 6795 2411 Fax: (65) 6795 5877 Email: eesss@singnet.com.sg Company Registration (UEN)
More informationC Soldering Temperature, for 10 seconds 300 (1.6mm from case )
Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 75 C Operating Temperature Fast Switching Fuy Avaanche Rated Lead-Free Description Advanced HEXFET Power MOSFETs from Internationa
More informationIRF1010NPbF. HEXFET Power MOSFET V DSS = 55V. R DS(on) = 11mΩ I D = 85A
Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 75 C Operating Temperature Fast Switching Fuy Avaanche Rated Lead-Free Description Advanced HEXFET Power MOSFETs from Internationa
More informationSpecification Tapped holes f. coupl Scope Allocation of the JED Numbers General...
WABCO Specification 2003-07 Class: Engineering Guidelines Class No.:62 Tapped Holes for Couplings JED according to ISO 4039-2 464 Previous Edition Abbreviated Title 1985-11 Tapped holes f. coupl. 852 004
More informationSlim-line Aluminium Roofs Assembly Guide
Sim-ine Auminium Roofs Assemby Guide Contents Bonded fush gazed roofs Page 3 Singe section of gass Page 4 Singe square with opener Page 5 Mutipe gass panes Page 6 Instaing Openers Page 10 Timber Kerb For
More informationCURRIES Tech Data Frame Section. Revised Oct., 2018
CURRIES Tech Data Frame Section Revised Oct., 2018 i Index August, 2017 DESCRIPTION PAGE(S) Anchors Drywall Frame Base Anchor...35 Compression Anchor...34, 36, 39 Multipurpose Anchor Installation...17
More informationTOOL SEE PAGE 11 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY, AND LIMITATION OF LIABILITY
SCTP SERIES PNEUMATIC SAFE-T-CABLE TOOL DATASHEET SEE PAGE 11 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY, AND LIMITATION OF LIABILITY INTRODUCTION The Daniels SCTP Series Pneumatic Safe-T-Cable
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Pease v isit our website for pricing and avaiabiity at www.hest ore.hu. Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 75 C
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationMR certified. iq Series, Ultra Low ESR, NP0. RF Capacitors, RoHS & REACH Compliant DESCRIPTION APPLICATIONS CIRCUIT APPLICATIONS
iq eries, Ultra ow ER, NP0 RF Capacitors, Ro & REAC Compliant DECRIPION owest ER in class ighest working voltage in class 1 500V tandard EIA sizes aser Marked (optional) igh elf Resonance Frequencies APPICAION
More informationAllentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015
Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationJUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
sales@jumo.co.uk info.us@jumo.net Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g.
More informationCX-400 SERIES. Compact Photoelectric Sensor. World standard photoelectric sensors Full line up 116 models! Strong against oil and coolant liquids
Compact Photoeectric CX- SERIES Reated Information Ampifi er Genera terms and conditions... P. seection guide...p.~ / P.9~ MS-AJ / CHX-SC...P.799 / P.8 Gossary of terms / Genera precautions... P.98 ~ /
More informationA representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationATC 100 B Series Porcelain Superchip Multilayer Capacitors
AC Series Porcelain Superchip Multilayer Capacitors Case Size Capacitance Range (" x ") 0. pf to 0 pf High Q Ultra-Stable Performance ow ESR/ES High Self-Resonance ow Noise Established Reliability (QP)
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationHEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
More informationAustralia Edition. CI/SfB (29) Et6. February Reinforcing Bar Couplers. for the Construction Industry
Austraia Edition CI/SfB (29) Et6 February 2019 Reinforcing Bar Coupers for the Construction Industry Reinforcing Bar Coupers Simpify the design and construction of concrete Lapped joints are not aways
More informationLORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures
LORON SERVICE MANUAL / PARTS LIST SINGLE DOUBLE PALLET HANDLER CONTENTS: PAGE 1 Lift Truck Requirements General Installation Procedures 2 Mounting Options Stop Block Adjustments 3 General Weekly Inspection
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationR is in the unit of ma/mw or A/W. For semiconductor detectors, the value is approximately, 0.5 ma/mw.
Light Detection Conventiona methods for the detection of ight can be categorized into photo-synthesis, photographic pate, and photoeectric effect. Photo-synthesis and photographic pate are based on ight-induced
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationLF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
More informationMounting Systems & Hydro-Grip
Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationThermal Resistance Parameter Min. Max. Units
HEXFET Power MOSFET Dynamic dv/dt Rating Current Sense 175 C Operating Temperature Fast Switching Ease of Paraeing Simpe Drive Requirements Description Third Generation HEXFETs from Internationa Rectifier
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationMODEL: R3-WT4. Remote I/O R3 Series. [4] OPTIONS blank: none /Q: With options (specify the specification) AC POWER INPUT MODULE (4 input circuits)
MODE: R-WT Remote I/O R Series AC POWER MODUE ( input circuits). (.) (.) [] OPTIONS ban: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q COATING (For the detai, refer to M-System's
More informationNTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges
NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged
More information7 DO NOT run down shade cloth outside of the Side Channels. Headbox Height + Hembar** ¼ (6mm) on Both Sides. 2¼ (57mm)
Instaation Instructions Futureguard FexShade Zip by Draper READ BEFORE YOU BEGIN Inspect a boxes to make sure you have received the proper parts. 2 Open cartons engthwise. 3 A hardware must be instaed
More informationDETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR
INCH-POUND MS21344A 4 October 2016 SUPERSEDING MS21344 17 August 1971 DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR This specification
More informationElectronic circuit protector ESX10-Sxxx-DC24V-1A-10A
Eectronic circuit protector ESX10-Sxxx-DC2V-1A-10A Description The mode ESX10-Sxxx extends our product group of eectronic overcurrent protection devices for DC 2 V appications. At a width of ony 12.5mm
More informationSpare Bits and Bit Holders for Circle Cutters
19015 Adjustabe Circe Cutters Cutting Toos Circe cutter with 1 obique bit HSS-E and additiona bit hoders for straight bits (no draw cuts), cutting speed for HSS-E bits approx. 8-25 m/min. (stee and iron
More informationNEWLONG. r PORTABLE FILLED BAG CLOSING MACHINE NEWLONG MACHINE WORKS, LTD.
NEWLONG r PORTABLE FILLED BAG CLOSING MACHINE * NEWLONG MACHINE WORKS, LTD. () THREAD TENSION AND COVER PARTS 0 () THREAD TENSION AND COVER PARTS Ref. No. Part No. Description Q ty Remarks 5 6 7 8 9 0
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationMIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationIRF1010EPbF. HEXFET Power MOSFET V DSS = 60V. R DS(on) = 12mΩ I D = 84A
Advanced Process Technoogy Utra Low On-Resistance Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching Fuy Avaanche Rated Lead-Free Description Advanced HEXFET Power MOSFETs from Internationa
More informationAssmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS
Assmann Corporation of America TANK INSTALLATION AND USE GUIDELINES FOR BULK STORAGE TANKS General Information Assmann polyethylene storage tanks are manufactured to give you the toughest, most reliable
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationInstallation Instructions
Installation Instructions XLC Series Self-aligning split bearing Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment disassembly: Lock out motor. Wear designated
More informationHALSEY TAYLOR OWNERS MANUAL Contour TM Series Barrier-Free Water Coolers Refrigerated Fountains with Back Panel
HALSEY TAYLOR OWNERS MANUAL Contour TM Series BarrierFree Water Coolers Refrigerated Fountains with Back Panel Figure HRFSERQ Figure HRFERQ Figure HRFSRQ Figure Not Shown Model HRFSERQ HRFERQ HRFSRQ HRFESRQ
More information