Ultra High Purity WELD & METAL SEAL FITTINGS
|
|
- Elaine Willis
- 5 years ago
- Views:
Transcription
1 Ultra High Purity WED & EA SEA IINGS
2 Weld & etal Seal ittings Weld & etal Seal ittings Ordering Information *Additional configurations available upon request. A S B 4 C G D N E P Standard feature Optional A B aterials Glands, Bodies, and Nuts S D Gaskets S NI Connection AS ube Designator 316 Stainless Steel 316 Stainless Steel VAR 316 Stainless Steel Nickel Nominal Outside Diameter Wall hickness 4 1/4 in mm 1.0 mm 6 3/8 in mm 1.0 mm 8 1/2 in mm 1.24 mm 12 3/4 in mm 1.65 mm 16 1 in mm 1.65 mm Optional End Connection s or drop size fittings, first size the run and add the suffix X then a size designator for the branch. (i.e. Reducer for 3/8 O.D. tube and 1/4 male pipe thread would be 6X4) C ype R E HE CR B G G SSG SG RSG BG WG A U RU BHU C Reducer Elbow 45 Elbow ee Cross ribow emale Gland ale Gland Socket Weld Short Gland Socket Weld ong Gland Reducing Socket Weld Gland Blind Gland ale Weld Gland ube Adapter Double ale Union Double ale Reducing Union Bulkhead Union BW Connector C D ype (continued) BHC BW Bulkhead Connector CG Coupling RU Double emale Reducing Union RA Reducing Adapter RB Reducing Bushing E ale Elbow UE Union Elbow U Union ee UC Union Cross SC SUPEROK ube itting Connector BHSC SUPEROK ube itting Bulkhead Connector BHC Bulkhead ale Connector C ale Connector C emale Connector GR Gasket Retainer Assembly G Gasket BG Blind Gasket N emale Nut N ale Nut PG Plug CP Cap PGC Plug (Cable ype) HN High low emale Nut HN High low ale Nut HG High low ong Gland HC High low BW Connector HBHC High low BW Bulkhead Connector WC Welded ale Connector WC Welded emale Connector WSC Welded ok Connector WU Welded emale Union hreads ype Designator hread Option N NP (National Pipe hread) R P (apered hread) U SAE (Unified) 4
3 Weld & etal Seal ittings Weld & etal Seal ittings E ube ength Wetted Surface Grade mm Glands, Bodies, and Nuts mm BA is standard. No part designator needed mm P EP mm Gaskets mm eave Blank: Unplated gasket SP Silver plated Part Number Examples S8G6-P S6X4R19 S1623 aterial S 316 Stainless Steel S 316 Stainless Steel S 316 Stainless Steel Connection 8 1/2 in 6X4 3/8 in. (Run) X 1/4 in. (Branch) 16 1 in. ype G emale Gland R Reducer ee hread ype Not applicable Not applicable Not applicable ube ength mm mm mm Surface Grade P EP Grade BA Grade (standard) BA Grade (standard) D4EN-P NI16G S4GR-SP aterial D 316 Stainless Steel VAR NI Nickel S 316 Stainless Steel Connection 4 1/4 in. (Run) X 1/4 in. NP thread (Branch) 16 1 in. 4 1/4 in. ype E ale Elbow G Gasket GR Gasket Retainer hread ype N NP (National Pipe hread) Not applicable Not applicable ube ength Not applicable Not applicable Not applicable Surface Grade P EP Grade Unplated (standard) SP Silver plated Vacuum Coupling (BVC) ittings Vacuum Coupling (BVC) ittings provide the high purity of a metal-to-metal seal for leak-free service from vacuum to positive pressure applications. he gasket is compressed by two highly polished beads when a male nut and a female nut are engaged. Gasket: unplated stainless steel 316 (standard), unplated nickel, silver-plated stainless steel 316 or nickel, or special request As standard, BVC fittings are marked with manufacturer, material, grade, traveler number, and material heat code designator (HCN). Standard surface finish: Ra 0.25 μm (Ra 10 µin) est port allows easy leak testing he female nut is silver plated to ensure consistent torque and easy assembly. 5
4 Weld & etal Seal ittings ype icro Weld ittings icro Reducer icro 90 Elbow icro Reducing 90 Elbow icro 45 Elbow icro ee icro Reducing ee icro Cross icro ribow orged Weld ittings 90 Elbow Reducing 90 Elbow ale Weld Gland ube Adapter Double ale Union Double ale Reducing Union Bulkhead Union ube Butt Weld (BW) Connector ube Butt Weld (BW) Bulkhead Connector Coupling Double emale Reducing Union Reducing Adapter Reducing Bushing ale Elbow (NP) Gaskets Gasket Retainer Assembly Gasket Blind Gasket Nuts, Caps and Plugs emale Nut ale Nut Plug Cap Plug (Cable ype) High - low Connection - H ype High low emale Nut ee ale Elbow (P) High low ale Nut 6 Reducing ee Cross Reducer Glands emale Gland ale Gland Socket Weld Short Gland Socket Weld ong Gland Reducing Socket Weld ong Gland Blind Gland Union Elbow Union ee Union Cross SUPEROK ube itting Connector SUPEROK ube itting Bulkhead Connector Bulkhead ale Connector (NP) ale Connector (P) ale Connector (NP) ale Connector (S) emale Connector (P) emale Connector (NP) High low ong Gland High low ube Butt Weld (BW) Connector High low ube Butt Weld (BW) Bulkhead Connector Welded Assembly Welded ale Connector (P) Welded ale Connector (NP) Welded emale Connector (P) Welded emale Connector (NP) Welded ok Connector Welded emale Union
5 Weld & etal Seal ittings icro Weld ittings icro Reducer ube OD (D1) ube OD (D2) 1 2 B1 B2 S4X2R6 1/4" /8" S6X4R6 3/8" /4" S8X4R6 1/2" /4" S8X6R6 1/2" /8" S12X4R6 3/4" /4" S12X6R6 3/4" /8" S12X8R6 3/4" /2" icro 90 Elbow ube OD (D) A B S2E6 1/8" S4E6 1/4" S6E6 3/8" S8E6 1/2" S12E6 3/4" icro Reducing 90 Elbow ube OD (D1) ube OD (D2) 1 2 A B S4X2E6 1/4" /8" S6X4E6 3/8" /4" S8X4E6 1/2" /4" S8X6E6 1/2" /8" S12X4E6 3/4" /4" S12X6E6 3/4" /8" S12X8E6 3/4" /2" icro 45 Elbow ube OD (D) A B S2HE6 1/8" S4HE6 1/4" S6HE6 3/8" S8HE6 1/2" S12HE6 3/4"
6 Weld & etal Seal ittings icro ee ube OD (D) A B S26 1/8" S46 1/4" S66 3/8" S86 1/2" S126 3/4" icro Reducing ee ube OD (D1) ube OD (D2) 1 2 A B S4X26 1/4" /8" S6X46 3/8" /4" S8X46 1/2" /4" S8X66 1/2" /8" S12X46 3/4" /4" S12X66 3/4" /8" S12X86 3/4" /2" icro Cross ube OD (D) A B S2CR6 1/8" S4CR6 1/4" S6CR6 3/8" S8CR6 1/2" S12CR6 3/4" icro ribow ube OD (D) A B S2B6 1/8" S4B6 1/4" S6B6 3/8" S8B6 1/2" S12B6 3/4"
7 Weld & etal Seal ittings orged Weld ittings 90 Elbow ube OD (D) A B S4E19 1/4" S6E19 3/8" S8E19 1/2" S12E22 3/4" S16E23 1" S4E10 1/4" S6E10 3/8" S8E10 1/2" S12E10 3/4" S16E10 1" Reducing 90 Elbow ube OD (D1) ube OD (D2) 1 2 A B S6X4E19 3/8" /4" S8X4E19 1/2" /4" S8X6E19 1/2" /8" S12X4E22 3/4" /4" S12X6E22 3/4" /8" S12X8E22 3/4" /2" S16X4E23 1" /4" S16X8E23 1" /2" S16X12E23 1" /4" ee ube OD (D) A B S419 1/4" S619 3/8" S819 1/2" S1222 3/4" S1623 1" S410 1/4" S610 3/8" S810 1/2" S1210 3/4" S1610 1"
8 Weld & etal Seal ittings Reducing ee ube OD (D1) ube OD (D2) 1 2 A B S6X419 3/8" /4" S8X419 1/2" /4" S8X619 1/2" /8" S12X422 3/4" /4" S12X622 3/4" /8" S12X822 3/4" /2" S16X423 1" /4" S16X823 1" /2" S16X1223 1" /4" S6X410 3/8" /4" S8X410 1/2" /4" S8X610 1/2" /8" S12X410 3/4" /4" S12X610 3/4" /8" Cross ube OD (D) A B S4CR19 1/4" S6CR19 3/8" S8CR19 1/2" S12CR22 3/4" S16CR23 1" S4CR10 1/4" S6CR10 3/8" S8CR10 1/2" S12CR10 3/4" S16CR10 1" Reducer ube OD (D1) ube OD (D2) 1 2 B S6X4R19 3/8" /4" S8X4R19 1/2" /4" S8X6R19 1/2" /8" S12X4R19 3/4" /4" S12X6R19 3/4" /8" S12X8R19 3/4" /2" S16X4R19 1" /4" S16X6R19 1" /8" S16X8R19 1" /2" S16X12R19 1" /4" S6X4R10 3/8" /4" S8X4R10 1/2" /4" S8X6R10 1/2" /8" S16X4R10 3/4" /4" S16X6R10 3/4" /8" S16X8R10 3/4" /2"
9 Weld & etal Seal ittings Glands emale Gland ube OD (D) B S2G19 1/8" 1/8" /8" S4G6 1/4" 1/4" /4" S4G10 1/4" 1/4" /4" S4G19 1/4" 1/4" /4" S6G6 1/2" 3/8" /2" S6G10 1/2" 3/8" /2" S6G19 1/2" 3/8" /2" S8G6 1/2" 1/2" /2" S8G10 1/2" 1/2" /2" S8G19 1/2" 1/2" /2" S12G19 3/4" 3/4" /4" S16G19 1" 1" " S8X4G6 1/2" 1/4" /2" S8X4G10 1/2" 1/4" /2" S8X4G19 1/2" 1/4" /2" ANS : Available Nut ale Gland ube OD (D) B S2G19 1/8" 1/8" /8" S4G6 1/4" 1/4" /4" S4G10 1/4" 1/4" /4" S4G19 1/4" 1/4" /4" S6G6 1/2" 3/8" /2" S6G10 1/2" 3/8" /2" S6G19 1/2" 3/8" /2" S8G6 1/2" 1/2" /2" S8G10 1/2" 1/2" /2" S8G19 1/2" 1/2" /2" S12G19 3/4" 3/4" /4" S16G19 1" 1" " S8X4G6 1/2" 1/4" /2" S8X4G10 1/2" 1/4" /2" S8X4G19 1/2" 1/4" /2" ANS : Available Nut Socket Weld Short Gland ANS ANS Sokcet D E x S4SSG 1/4" 1/4"
10 Weld & etal Seal ittings Socket Weld ong Gland Sokcet D E x S2SG 1/8" 1/8" S4SG 1/4" 1/4" S6SG 1/2" 1/2" S8SG 1/2" 1/2" S12SG 3/4" 3/4" S16SG 1" 1" Reducing Socket Weld ong Gland Sokcet D E x S4X2RSG 1/4" 1/8" S8X4RSG 1/2" 1/4" Blind Gland S2BG 1/8" 17.8 S4BG 1/4" 33.3 S8BG 1/2" 38.1 S12BG 3/4" 50.8 S16BG 1" 56.4 ale Weld Gland ANS : Available Nut ube OD (D) E B S2WG 1/8" 1/8" /8" S4WG 1/4" 1/4" /4" S6WG 1/2" 3/8" /8" S8WG 1/2" 1/2" /2" ANS 12
11 Weld & etal Seal ittings ube Adapter ANS : Available Nut ube OD (D) E B S4A 1/4" 1/4" /4" S6A 1/2" 3/8" /8" S8A 1/2" 1/2" /2" ANS Double ale Union E S2U 1/8" /16-24UN S4U 1/4" /16-18UN S8U 1/2" /8-14UN S12U 3/4" /4-18UNE S16U 1" /2-20UN Double ale Reducing Union E1 E2 1 2 S4X2RU 1/4" 1/8" /16-18UN 5/16-24UN S8X4RU 1/2" 1/4" /8-14UN 9/16-18UN Bulkhead Union E B 1 2 S4BHU 1/4" /16-18UN S8BHU 1/2" /8-14UN S12BHU 3/4" /4-18UNE S16BHU 1" /2-20UN 13
12 Weld & etal Seal ittings ube Butt Weld (BW) Connector ube OD (D) B E S4C 1/4" 1/4" /16-18UN S6C 1/2" 3/8" /8-14UN S8C 1/2" 1/2" /8-14UN S12C 3/4" 3/4" /4-18UNE ube Butt Weld (BW) Bulkhead Connector Head ube OD (D) E B1 B2 1 2 S4BHC 1/4" 1/4" /16-18UN S8BHC 1/2" 1/2" /8-14UN S12BHC 3/4" 3/4" /4-18UNE Coupling S2CG 1/8" S4CG 1/4" S8CG 1/2" S12CG 3/4" S16CG 1" Double emale Reducing Union E A S8X4RU 1/2" 1/4"
13 Weld & etal Seal ittings Reducing Adapter E A S2X4RA 1/8" 1/4" /16-24UN S4X8RA 1/4" 1/2" /16-18UN Reducing Bushing E A S4X2RB 1/4" 1/8" /16-18UN S8X4RB 1/2" 1/4" /8-14UN ale Elbow (NP) (NP) E A1 A2 S4EN 1/4" 1/4" /16-18UN S8EN 1/2" 1/2" /8-14UN S12EN 3/4" 3/4" /4-18UNE ale Elbow (P) (P) E A1 A2 S4ER 1/4" 1/4" /16-18UN S8ER 1/2" 1/2" /8-14UN S12ER 3/4" 3/4" /4-18UNE 15
14 Weld & etal Seal ittings Union Elbow E A S4UE 1/4" /16-18UN S8UE 1/2" /8-14UN S12UE 3/4" /4-18UNE S16UE 1" /2-20UN Union ee E A S4U 1/4" /16-18UN S8U 1/2" /8-14UN S12U 3/4" /4-18UNE S16U 1" /2-20UN Union Cross E A S4UC 1/4" /16-18UN S8UC 1/2" /8-14UN S12UC 3/4" /4-18UNE S16UC 1" /2-20UN 16
15 Weld & etal Seal ittings SUPEROK ube itting Connector Head ube C D E G S4SC 1/4" 1/4" /4" 9/16-18UN S8SC 1/2" 1/2" /2" 7/8-14UN SUPEROK ube itting Bulkhead Connector Head ube C D E 1 2 G S4BHSC 1/4" 1/4" /4" 9/16-18UN S8BHSC 1/2" 1/2" /2" 7/8-14UN Bulkhead ale Connector (NP) Head (NP) B1 B2 E1 E2 1 2 A S4BHCN 1/4" 1/4" /16-18UN ale Connector (P) (P) E B S2CR 1/8" 1/8" /16-24UN S4CR 1/4" 1/4" /16-18UN S8CR 1/2" 1/2" /8-14UN S12CR 3/4" 3/4" /4-18UNE S16CR 1" 1" /2-20UN 17
16 Weld & etal Seal ittings ale Connector (NP) (NP) E B S2CN 1/8" 1/8" /16-24UN S4CN 1/4" 1/4" /16-18UN S8CN 1/2" 1/2" /8-14UN S12CN 3/4" 3/4" /4-18UNE S16CN 1" 1" /2-20UN ale Connector (SAE) (SAE) E B S4X6CU 1/4" 9/16-18UN /16-18UN S8X10CU 1/2" 7/8-14UN /8-14UN S8X6CU 1/2" 9/16-18UN /8-14UN S12X14CU 3/4" 1 3/16-12UN /4-18UNE emale Connector (P) (P) E S2CR 1/8" 1/8" /16-24UN S4CR 1/4" 1/4" /16-18UN S8CR 1/2" 1/2" /8-14UN S12CR 3/4" 3/4" /4-18UNE S16CR 1" 1" /2-20UN 18
17 Weld & etal Seal ittings emale Connector (NP) (NP) E S2CN 1/8" 1/8" /16-24UN S4CN 1/4" 1/4" /16-18UN S8CN 1/2" 1/2" /8-14UN S12CN 3/4" 3/4" /4-18UNE S16CN 1" 1" /2-20UN Gaskets Gasket Retainer Assembly D1 D2 S4GR 1/4" S8GR 1/2" S12GR 3/4" S16GR 1" Gasket D1 D2 S2G 1/8" S4G 1/4" S8G 1/2" S12G 3/4" S16G 1"
18 Weld & etal Seal ittings Blind Gasket D S4BG 1/4" S8BG 1/2" S12BG 3/4" S16BG 1" Nuts, Caps and Plugs emale Nut D Hex. S2N 1/8" /16-24UN S4N 1/4" /16-18UN S8N 1/2" /8-14UN S12N 3/4" /4-18UNE S16N 1" /2-20UN ale Nut B D Hex. S2N 1/8" /16-24UN S4N 1/4" /16-18UN S4NS* 1/4" /16-18UN S8N 1/2" /8-14UN S12N 3/4" /4-18UNE S16N 1" /2-20UN *S4NS : Short ale nut 1/4" only 20
19 Weld & etal Seal ittings Plug S2PG 1/8" /16-24UN S4PG 1/4" /16-18UN S8PG 1/2" /8-14UN S12PG 3/4" /4-18UNE S16PG 1" /2-20UN Cap B Hex. S2CP 1/8" /16-24UN S4CP 1/4" /16-18UN S8CP 1/2" /8-14UN S12CP 3/4" /4-18UNE S16CP 1" /2-20UN Plug (Cable ype) Cable ength S4PGC 1/4" S8PGC 1/2" High - low Connection - H ype High low emale Nut D S4HN 1/4" /16-18UN 21
20 Weld & etal Seal ittings High low ale Nut B D S4HN 1/4" /16-18UN High low ong Gland Head ube OD (D) B E1 E2 S4X6HG 1/4" 3/8" High low ube Butt Weld (BW) Connector Head ube OD (D) E1 E2 B1 B2 S4X6HC 1/4" 3/8" /16-18UN High low ube Butt Weld (BW) Bulkhead Connector Head ube OD (D) B1 B2 E1 E2 1 2 S4X6HBHC 1/4" 3/8" /16-18UN 22
21 Weld & etal Seal ittings Welded Assembly Welded ale Connector (P) ( in ) ( P ) E 1 2 G S4WCR 1/4" 1/4" S8WCR 1/2" 1/2" Welded ale Connector (NP) ( in ) ( NP ) E 1 2 G S4WCN 1/4" 1/4" S8WCN 1/2" 1/2" Welded emale Connector (P) ( in ) ( P ) E 1 2 G S4WCR 1/4" 1/4" S8WCR 1/2" 1/2"
22 Weld & etal Seal ittings Welded emale Connector (NP) ( in ) ( NP ) E 1 2 G S4WCN 1/4" 1/4" S8WCN 1/2" 1/2" Welded ok Connector Head ( in ) ube ( in ) C D E G1 G2 S4WSC 1/4" 1/4" S8WSC 1/2" 1/2" Welded emale Union G S4WU 1/4" S8WU 1/2"
Ultra High Purity Fittings INDEX
Ultra High Purity ittings INX icro Weld ittings icro Reducer 249P ale Weld land ube dapter 255P 256P askets asket Retainer ssembly 262P icro 90 lbow icro Reducing 90 lbow icro 45 lbow 249P 249P 249P ouble
More informationTube Adapter. Double Male Union Double Male Reducing Union Bulkhead Union. Tube Butt Weld Connector. Tube Butt Weld. Bulkhead Connector.
icro Reducer icro 90 lbow icro Reducing 90 lbow icro 45 lbow icro ee icro Reducing ee 05 05 06 ube dapter 12 ale Connector (NP) ale Connector (S) emale Connector (P) 17 ouble ale Union ouble ale Reducing
More informationULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings
UR HIGH PURIY FC S & icro Fit Weld Fittings OGP CH UHP ubes & Pipes Features Provide quick assembly and dismantling of components and tubes. Guarantee high purity leak free service from high vacuum to
More informationFORGED WELD FITTINGS
ICRO WD ITTINGS ORGD WD ITTINGS TA AC SA ITTINGS 2 Super Clean itting Series 2 Super Clean itting Series 2 Super Clean itting Series WD ITTINGS & TA AC SA ITTINGS TBW AND TA AC SA ITTINGS components are
More informationULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS.
UR HIGH PURIY C S & W IINGS www.unilok.com Weld & etal ace Seal ittings Uni-ok Weld & etal ace Seal () fittings are designed and manufactured as high performance and high purity components by our own know-how
More informationDK-Lok UHP Fittings. No.09-01(K) May 2017
K-ok UP Fittings No.09-01(K) May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM 05 05 ong Reducing ee WR ong ross ee WX 08 09 Socket Wed Short Gand GSS ube dapter Gand G 13 14 Micro
More informationFITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
More informationHigh Pressure Tube Fittings and Tubing
High Pressure Fittings and ubing A-26 High Pressure Fittings and ubing 60,000 psig (4137 bar) Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea ools and Installation echnical Information
More informationBrass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
More informationFORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More informationIGC II Integrated Gas Components Substrates, Manifolds, Mounting Components, and Assembly Hardware
www.swagelok.com IGC II Integrated Gas Components Substrates, s, Mounting Components, ssembly Hardware IGC II Series. in. (. mm) c-ring modular design Compact footprint minimizes space requirements Lightweight,
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationThis specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
More informationProfibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationThis specification describes the minimum requirements for piping systems for the following service:
SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationQUALITY ASSURANCE SPECIFICATION
Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationHydraulic Adapters (080201/ MS# 51820) (080202/ MS# 51815) (071502) (081602) (080203/MS# 51813)
Steel and stainless steel bite type fittings meet all design and performance requirements for hydraulic flareless tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE).
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationtubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationHow to Identify a PBM VALVE SERIES
How to Identify a PBM VALVE SERIES Series 0 (SP, DP, MP) 1. If it is a manual valve, the handle generally would be made of a cast iron or cast bronze. 2. If it is a manual valve, the stem at the very top
More informationIndex. Accessories WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Index 9.00.01 07/2010.C Accessories Mounting Kits and Cross Reference - 300, 400 Series... 9.01.01 Mounting Kits - 500, 700, 900 Series... 9.01.02 Stud Nuts & Kits... 9.02.01 Stud Nuts & Kits - ISO 03,
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationDynaPower Generation II
DynaPower Generation II Return to DYNAPOWER index Return to MAIN index GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING GENERATION II 2.0 DYNAPOWER MODEL 2.0 VARIABLE PUMP PARTS DRAWING
More informationStock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
More informationMIK COMPACT MAGNETO-INDUCTIVE FLOWMETER
MIK COMPACT MAGNETO-INDUCTIVE FLOWMETER Flow Pressure Level Temperature Measurement Monitoring Control Flow Ranges from 0.18-7.8 GPH through 9-180 GPM For Use with a Wide Variety of Conductive Liquids,
More informationReliance SG777 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More informationGP ONE SPLIT DECK 9/4/2012 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
GP ONE SPLIT DECK PAGE G & P ONE GRINER SPLIT DECK SUB ASSEMBLY PARTS BREAK DOWN 4 2 24 20 2 6 0 36 24 7 27 2 2 25 3 32 2 24 28 24 8 7 24 5 2 25 2 20 2 4 3 2 34 5 26 22 2 27 35 22 3 30 6 9 29 8 29 2 9
More informationSERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationBeaded Hose Barbs 4601 (430292) 4603 (430392) 2 2 Pg. 83. Pg. 86 Beaded Hose Barb x MB 1-HS 2-MB. Pg. 85 Beaded Hose Barb x MB 1-HS 2-MB
Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 72-hour salt spray requirement. For
More informationSC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No
SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ169166-2018 Construction Tools GmbH No. 3390788601 2018-05-09 General information This spare parts list applies to the following: Part number
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping
More informationAccessories for sensors
Accessories for sensors Mounting and installation Adapters for pressure sensors: Hex AF width 27 ZBM 01 Adapter female thread G1/4 male thread G1/2 B, DIN EN 837-1 Part no.: 257276 Flat seal ring Cu 6.2x17.5x2.0
More informationJUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
sales@jumo.co.uk info.us@jumo.net Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g.
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationMIL-DTL-38999, Series I, LJT
I-D-38999, eries I, J ABE O COE Combined I-D-38999 eries I, II, III hell ize & Insert Arrangements Availability.............. 4-7 Insert Arrangement Drawings................... 8-14 pecifications - Contact
More information240 Owner s Manual & Parts Book
0 Owner s Manual & Parts Book Purchase Date Serial Number Model Number Tractor Model Dealer PN: 3-188 Serial #:083-88, 0, 07-... Date --0 Contents Description Page To The Owner, Maintenance Safety Precautions
More informationDETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
INCH-POUND AN924 Rev 13 14 April 2014 SUPERSEDING AN924 Rev 12 w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING Reinstated after 14 June 2012. Inactive
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationEssex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More information11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1
11. PARTS LIST 11.1 HEAD STOCK UPSIDE (1) 11-1 HEAD STOCK UPSIDE (1) PARTS LIST NO. PART NO DESCRIPTION QTY 1. SC-M6x20L SOCKET CAP SCREW 4 2. K6-K042-00 TOP BEARING CAP 1 3. 6009LLB BALL BEARING 1 4.
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationCorning Gilbert Inc. Microwave Push-on Interconnects 1
Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics
More informationThin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc. 1967 South
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationFitting C.O. Adapter
ABS-DWV Fittings ABS/DWV Service Weight Pipe Schedule 30 Single step solvent cementing procedures no primer required. Excellent solvent cementing characteristics. Black. 84/Ctn. x h Hub Sanitary 0321612
More informationCG1-N C02-3 CM1-N B02-3 CM1-N C02-3 CP1-N C01-3 CP2-N C01-3
DIN 43650 Molded Cable Assemblies DIN Type DIN 43650 A Industrial Form B Industrial Form B DIN 43650 C Industrial Form C Pin Spacing (Between 1 & 2) 18mm 11mm 11mm 8mm 9.4mm Ground Type (Position) Dual
More informationElectrical Components Catalog RF Connectors
Introduction Product Facts Designed and Manufactured to meet MI-C-39012 Requirements Wide Range of Connectors available in 50 and 75 Ohm Impedance The range offers connectors to suit from DC-11 GHz Operation
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationSR-1.0 Manual, a.doc 11/14/2006 Page 1 of 17
SR-1.0 Manual, 20061108a.doc 11/14/2006 Page 1 of 17 ASSEMBLY INSTRUCTIONS, MODEL SR-1.0 EXTRUSION HEAD STREAMLINE EXTRUSION, INC. Following is a set of photos and verbal descriptions for assembling the
More information8" STEEL HOPPER AUGER
" STEEL HOPPER AUGER REF # PART # DESCRIPTION Sold By 1 01-00001 " or 10" HYDRAULIC MOTOR ea. 2 01-0000 O-RING ea. 000-01000 MANUAL FLOW CONTROL BLOCK c/w REF#2& ea. 010-00001 /1" x 2" SOCKET HEAD BOLT
More informationSMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
More informationA representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.
SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationRG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)
T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationDigital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
More informationHYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
More informationCombiTemp TCR6 Standard RTD temperature sensor
Main features Sensor and connection in stainless steel, ISI 6 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating systems Water
More informationADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationRFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
More informationNote: Do not bury sulphur dioxide lines Use stainless steel pipe and fittings only where specified on project drawings.
1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Liquid and High Pressure Gaseous Dry Sulphur Dioxide (Less than 100 ppm of water)
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationRhino r VE/CE Pneumatic Level Detect Modules. Description S S. The assembly detects two conditions during the downward movement of the follower:
Rhino r VE/CE Pneumatic Level Detect Modules Description See Figure 1. Level Detect modules use roller plunger limit switches on guide rails to monitor the distance between the bottom of the follower and
More informationW-K-M Model MA-1 DynaCentric Butterfly Valve
Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,
More informationThe Low-Noise, Integrated Transformer Helium-4 Dipstick Insert
The Low-Noise, Integrated Transformer Helium-4 Dipstick Insert Sang Lin Chu Georgia Institute Of Technology 837 State Street N.W. Atlanta, GA 30332 gte813m@prism.gatech.edu, sanglinchu@hotmail.com December
More informationHigh-quality pressure transmitter For general industrial applications Model S-10
Electronic pressure measurement High-quality pressure transmitter For general industrial applications Model S-10 WIKA data sheet PE 81.01 for further approvals see page 4 Applications Machine building
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationThis specification describes the minimum requirements for piping systems for the following service:
201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)
More informationConduit End Bells...EA1 Hex Reducing Bushings...EA2 Conduit Hubs...EA3-EA4. Split Couplings...EA5 Three Piece Couplings...EA6 Conduit Nipples...
SECTION E INDEX Product Description Page Number Conduit End Bells.......................................EA Hex Reducing Bushings..................................EA2 Conduit Hubs......................................EA-EA4
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationCable Glands, Metal, for shielded EMC Cables CG.EM.*.*.*
Features Assembly Cable gland series for shielded EMC cables Brass nickel-plated or stainless steel AISI 316 Suitable for operation in Zones 1, 2, 21 and 22 Certified Ex d, Ex e and Ex tb Metric and NPT
More informationSection A Gear Box September A
Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationESCUTCHEONS & NIPPLES THREAD CODE CHART UNIVERSAL
ESCUTCHEONS & NIPPLES THREAD CODE CHART ID # SIZE MANUFACTURER 1 1/2" - 24 Thread Sayco 2 9/16" - 20 Thread American Standard, Central Brass 3 5/8" - 18 Thread Price Pfister, Repcal 4 5/8" - 24 Thread
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationOEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
More informationThread and End Connection
www.swagelok.com and End Connection I d e n t i f i c a t i o n G u i d e Contents Introduction and End Connection Terminology.. 4 General Terminology................... 5 Step-by-Step Identification
More informationOEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)
Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors
More informationFLARELESS SEPARABLE FITTING
FLARELESS SEPARABLE FITTING DESIGN CONCEPT: The concept of Flareless provides positive sealing and a high degree of sealing reliability for repeated usage. The configuration of Flareless joint consists
More informationPARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
More informationReliance SG800 Series Steel Water Gage Valves
Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,
More informationJK Front Crusher Flares
INSTALLATION INSTRUCTIONS INST-17-03-030_A JK Front Crusher Flares IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation.
More informationTorque wrenches Combination tool for MMBX/MMCX/MCX-right angle connectors Special tools for QN connectors
ASSEMBLY TOOLS COTETS PAGE Crimping tools and inserts for flexible cables... 385 Tool boxes... 387 Tool sets for semi-rigid cable assembling (solder type)... 389 Selection of common and helpful assembly
More informationA. Compatibility: Products shall be suitable for piping service fluids, materials, working pressures, and temperatures.
SECTION 22 05 16 LOOPS FOR PLUMBING PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationFIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationPressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
More informationSection F SETTING TABLE
Section F SETTING TABLE December 2009 1F Index No. Part No. Description 1. 47-051635-001 Geared Rack 2. 11-051880-001 N.A. Truss Hd. Machine Screw (6 mm x 16 mm) 47-861008-001 R.O. Truss Hd. Machine Screw
More informationThin Film Deposition
Thin Film Deposition Section Eleven 11 11.1 General Information 2 11.2 Deposition Monitors 3 11.3 Crystal Feedthroughs 4 11.4 Crystal s 5 11.5 Cables, s, Crystals & Accessories 6 Nor-Cal Products, Inc.
More information