High Pressure Tube Fittings and Tubing

Size: px
Start display at page:

Download "High Pressure Tube Fittings and Tubing"

Transcription

1 High Pressure Fittings and ubing A-26 High Pressure Fittings and ubing 60,000 psig (4137 bar) Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea ools and Installation echnical Information

2 A-27 High Pressure Fittings and ubing Fittings and ubing ontents Fittings Glands - G A-28 escription A-32 Quick ouplings ine Filters Sour Service Products Subsea ollars - O Plugs - P aps - Unions - U Reducing Unions - U Unions (Slip ype) - SU Bulkhead Unions - BU Ø Union Elbows - U A-28 A-28 A-28 A-29 A-29 A-29 A-30 A-30 ubing oned and hreaded Nipples - N Installation A-33 A-34 G-07 A-30 ools and Installation Union ees - Union rosses - A-31 echnical Information A-31 Anti-vibration Gland Assemblies - AVGA A-32

3 High Pressure Fittings and ubing A-28 Fittings Features Maximum working pressure: 60,000 psig (4137 bar) Working temperature range: -423 F to 1200 F (-252 to 649 ) Use with high pressure tubing as standard oned-and-threaded connection High tensile 316 Stainless Steel as raw material Anti-vibration connection components available Easy to disconnect and retighten Metal-to-metal seal to provide perfect leak-tight service from critical vacuum to high pressure Every fitting marked with size, material and heat number onstruction ubing Gland ollar Body Information and imensions Glands - SS-G-6FH4 SS-G-6FH6 SS-G-6FH9 G imensions, (mm) 0.82 (20.8) 1.13 (28.7) 1.50 (38.1) Fittings and ubing Sour Service Products ine Filters Quick ouplings ollars - imensions, (mm) Subsea SS-O-6FH (9.6) 0.38 (9.6) Plugs SS-O-6FH6 SS-O-6FH (12.7) 0.54 (13.7) 0.62 (15.8) ools and Installation - SS-P-6FH4 SS-P-6FH6 SS-P-6FH9 imensions, (mm) 0.38 (9.6) 1.04 (26.4) 0.50 (12.7) 1.35 (34.3) 1.89 (48.0) echnical Information

4 A-29 High Pressure Fittings and ubing Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea aps Unions Reducing Unions - x Gx - Hex - SS--6FH4 SS--6FH6 SS--6FH (19.1) 1.13 (28.6) imensions, (mm) G F imensions, (mm) 0.75 (19.1) 1.00 (25.4) G F SS-U-6FH (19.1) SS-U-6FH (44.5) 0.13 (3.3) 1.00 (25.4) SS-U-6FH (55.6) 0.19 (4.8) ools and Installation - x - x imensions, (mm) x G Gx F SS-U-6FH6-6FH (41.3) 1.00 (25.4) echnical Information SS-U-6FH9-6FH4 SS-U-6FH9-6FH (44.5) 2.00 (50.8) 0.13 (3.3)

5 High Pressure Fittings and ubing A-30 Unions (Slip ype) Fittings and ubing Bulkhead Unions - Ø SS-BU-6FH4 SS-BU-6FH6 SS-BU-6FH9 Union Elbows E - SS-SU-6FH4 SS-SU-6FH6 SS-SU-6FH (47.8) 2.38 (60.5) 2.75 (69.9) imensions, (mm) G F 1.75 (44.5) 2.19 (55.6) 0.13 (3.3) 0.19 (4.8) imensions, (mm) 0.13 (3.3) 0.19 (4.8) G F 1.06 (27.0) 0.75 (19.1) 1.00 (25.4) 1.88 (47.6) Panel Hole Size 0.94 (23.9) 1.13 (28.6) 1.69 (42.9) Max. Panel hickness 0.38 (9.7) 0.38 (9.7) 0.38 (9.7) Quick ouplings ine Filters Sour Service Products Subsea - E1 1 imensions, (mm) G E 1 E1 hickness SS-U-6FH (38.1) 0.88 (22.4) 1.00 (25.4) 0.62 (15.7) 0.75 (19.1) SS-U-6FH (3.3) 2.00 (50.8) 1.25 (31.8) 1.50 (38.1) 1.00 (25.4) 1.00 (25.4) SS-U-6FH (4.8) 2.62 (66.5) 1.88 (47.8) 1.88 (47.8) 1.12 (28.4) 1.50 (38.1) ools and Installation echnical Information

6 A-31 High Pressure Fittings and ubing Fittings and ubing Union ees E 1 Quick ouplings ine Filters Sour Service Products Subsea - SS--6FH4 SS--6FH6 SS--6FH9 Union rosses - SS--6FH4 imensions, (mm) G 1 E hickness 0.13 (3.3) 0.19 (4.8) (50.8) 2.00 (50.8) 2.62 (66.5) 1.25 (31.8) 1.56 (39.6) 2.12 (53.8) imensions, (mm) 0.88 (22.4) 1.06 (26.9) 1.38 (35.0) 0.75 (19.1) 1.00 (25.4) 1.50 (38.1) G 1 hickness 2.00 (50.8) 1.25 (31.8) 0.75 (19.1) SS--6FH (3.3) 2.00 (50.8) 2.12 (53.8) 1.00 (25.4) ools and Installation SS--6FH (4.8) 2.62 (66.5) 2.75 (69.9) 1.50 (38.1) echnical Information

7 High Pressure Fittings and ubing A-32 Anti-vibration Gland Assemblies he extreme vibration or shock in tubing systems, such as mobile pressure systems or long tubing runs culminating at a compressor are subjected to, will be prevented by using FIOK Anti-vibration Gland Assemblies. hese assemblies provide the same reliable connection as standard FIOK glands to essentially prolong vibrational fatigue life. A coned and threaded tubing, when subjected to unusual or excessive vibration, may fail prematurely and break at the last thread. FIOK Anti-vibration Gland Assembly acts to move the fulcrum of vibration away from the threaded part of the tubing onto the strong, solid wall of the tubing. A wedge-like collet firmly holds the assembly in place, virtually eliminating premature tubing failure while reliably maintaining a leakage-free connection between the tubing and the connection seat. ubing Body ollar - NOE: imensions are for reference only and are subject to change. SS Anti-vibration Gland Assembly escription Material 316 SS G O P U SU BU Gland ollar Plug ap Fitting ype SS-AVGA-6FH4 SS-AVGA-6FH6 SS-AVGA-6FH9 SS - SU - 6FH Union or Reducing Union Union (Slip ype) Bulkhead Union 6FH P1 P1 ype Female HP P4 P2 imensions, (mm) 1.12 (28.4) 1.50 (38.1) P1 Size " " " F P2, P3 and P4 Specify in the same way as the P1 Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea U Union Elbow AVGA Union ee Union ross Anti-vibration Gland Assembly P1, P2, P3 and P4 shall be described in the following orders: P3 escribe in descending order as per size if the end connection types are the same escribe the end of P1 if all end connections are the same ools and Installation NOE: " escription" is a reference to understand the combination rules of FIOK product part number. Not all combinations are available. echnical Information

8 A-33 High Pressure Fittings and ubing Fittings and ubing Quick ouplings ine Filters Sour Service Products Subsea ubing Features old drawn 316/316 Stainless Steel seamless tubing Working temperature range: -423 F to 1200 F (-252 to 649 ) Every tubing marked with material, size and heat number Use with high pressure tube fittings Information and imensions I.. Material Grade 316/ / /316 Basic SS-H-6FH4- SS-H-6FH6- SS-H-6FH9- Max./M (mm) 0.248/0.243 (6.30/6.17) 0.370/0.365 (9.40/9.27) 0.557/0.552 (14.15/14.02) Add the length designator as a suffix to the basic ordering number to get the complete ordering number. he length designator "-10" means 10 feet. he length designator "-6M" means 6 meters. Examples: 1. If 10 feet of " tubing is needed, the complete ordering number is SS-H-6FH If 6 meters of " tubing is needed, the complete ordering number is SS-H-6FH9-6M. he tubing is available in random lengths but no more than 20 feet (6 meters). Working Pressure -423 to 100 F (-252 to 37.8 ) 200 F (93 ) Working Pressure, psig (bar) 400 F (204 ) 57,750 (3982) 57,750 (3982) 57,750 (3982) 600 F (316 ) 54,250 (3740) 54,250 (3740) 54,250 (3740) 800 F (427 ) 50,700 (3496) 50,700 (3496) 50,700 (3496) ata in this table are applied only to the working temperature below 800 F (427 ). For the working temperature above 800 F (427 ), please contact FIOK Group or our authorized distributors. ools and Installation echnical Information

9 High Pressure Fittings and ubing A-34 oned and hreaded Nipples Machined from high pressure tubing For ", " and " high pressure tubing, manual coning and threading tools can be used to make nipples I.. SS-N-6FH SS-N-6FH4-3 SS-N-6FH4-4 SS-N-6FH4-6 SS-N-6FH4-8 SS-N-6FH4-10 SS-N-6FH4-12 SS-N-6FH6-3 SS-N-6FH6-4 SS-N-6FH6-6 SS-N-6FH6-8 SS-N-6FH6-10 SS-N-6FH6-12 SS-N-6FH9-4 SS-N-6FH9-6 SS-N-6FH9-8 SS-N-6FH9-10 SS-N-6FH9-12 (mm) 2.75 (69.9) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) Sour Service Products ine Filters Quick ouplings Installation Please see G-07. ools and Installation Subsea Fittings and ubing echnical Information

10 FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, Offenbach am Main, Germany el.: Fax: FIOK, Inc North Promenade Blvd., Suite 750, Stafford, exas 77477, USA el.: Fax: FIOK Incorporated Block, Zone E, Yingtai lndustrial Park, alang Street, onghua New istrict, Shenzhen, , hina el.: Fax: FIOK Middle East Oil Equipment rading , Makateb ower, Airport Road, P.O.Box , eira, ubai, UAE el.: Fax: info@fitokgroup.com FK-I-HF-03-EN

FITTINGS & GAUGES 20,000 PSI

FITTINGS & GAUGES 20,000 PSI PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled

More information

ULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings

ULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings UR HIGH PURIY FC S & icro Fit Weld Fittings OGP CH UHP ubes & Pipes Features Provide quick assembly and dismantling of components and tubes. Guarantee high purity leak free service from high vacuum to

More information

REPUTE tube fittings are manufactured to stringent quality control program and internal standards which

REPUTE tube fittings are manufactured to stringent quality control program and internal standards which Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are

More information

Ultra High Purity WELD & METAL SEAL FITTINGS

Ultra High Purity WELD & METAL SEAL FITTINGS Ultra High Purity WED & EA SEA IINGS Weld & etal Seal ittings Weld & etal Seal ittings Ordering Information *Additional configurations available upon request. A S B 4 C G D N E 6 - - P Standard feature

More information

FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube

FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive

More information

Hydraulic Adapters (080201/ MS# 51820) (080202/ MS# 51815) (071502) (081602) (080203/MS# 51813)

Hydraulic Adapters (080201/ MS# 51820) (080202/ MS# 51815) (071502) (081602) (080203/MS# 51813) Steel and stainless steel bite type fittings meet all design and performance requirements for hydraulic flareless tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE).

More information

ULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS.

ULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS. UR HIGH PURIY C S & W IINGS www.unilok.com Weld & etal ace Seal ittings Uni-ok Weld & etal ace Seal () fittings are designed and manufactured as high performance and high purity components by our own know-how

More information

Ultra High Purity Fittings INDEX

Ultra High Purity Fittings INDEX Ultra High Purity ittings INX icro Weld ittings icro Reducer 249P ale Weld land ube dapter 255P 256P askets asket Retainer ssembly 262P icro 90 lbow icro Reducing 90 lbow icro 45 lbow 249P 249P 249P ouble

More information

Assembly instructions

Assembly instructions Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions

More information

Assembly instructions

Assembly instructions Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions

More information

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5)

OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) Pressure OEM pressure sensor For industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 for further approvals see page 11 Applications Hydraulics and pneumatics Pumps and compressors

More information

Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.

Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic. CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with

More information

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does

More information

400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS

400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to

More information

Made in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS

Made in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS Made in USA Valves VALVES FOR INSTRUMENTATION & PROESS SYSTEMS SSP Fittings orp. Table of ontents FloLok Product Overview... 3 FloLok Selection Guide... 11 Two-Way Ball Valves... 12 Three-Way Ball Valves...

More information

OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)

OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors

More information

FITTINGS ADVANTAGE AND EXPERTISE IN YOUR INDUSTRY

FITTINGS ADVANTAGE AND EXPERTISE IN YOUR INDUSTRY PNEUFITDADVANTAGE INCH RANGE Acetal push-in fittings Comprehensive size and range from 5/32" to 1/2" Approved for use in pneumatics, medical, food and drinks applications FITTINGS ADVANTAGE AND EXPERTISE

More information

Reliance SG800 Series Steel Water Gage Valves

Reliance SG800 Series Steel Water Gage Valves Installation, Operation, & Maintenance Instructions R500.541D1 10/16/2016 Reliance SG800 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,

More information

COMPRESSION TUBE FITTINGS

COMPRESSION TUBE FITTINGS PRESSI UBE FIIGS PRESSI UBE FIIGS Since 1956, ASAVA BV has served the worldwide client base with instrumentation solutions. As a result of our tremendous efforts in research and development, Astava continues

More information

Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8

Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8 Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12

More information

GOST TUBING AND COUPLINGS

GOST TUBING AND COUPLINGS GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.

More information

FAV HIGH PRESSURE PIPE FITTINGS,10000 psi and above

FAV HIGH PRESSURE PIPE FITTINGS,10000 psi and above HH P PP,10000 psi and above Warning for our afety he system designer and user have the sole responsibility to select products suitable tor their special application requirements to ensure the proper installation.

More information

Tube Adapter. Double Male Union Double Male Reducing Union Bulkhead Union. Tube Butt Weld Connector. Tube Butt Weld. Bulkhead Connector.

Tube Adapter. Double Male Union Double Male Reducing Union Bulkhead Union. Tube Butt Weld Connector. Tube Butt Weld. Bulkhead Connector. icro Reducer icro 90 lbow icro Reducing 90 lbow icro 45 lbow icro ee icro Reducing ee 05 05 06 ube dapter 12 ale Connector (NP) ale Connector (S) emale Connector (P) 17 ouble ale Union ouble ale Reducing

More information

TOOLS AND INSTALLATION

TOOLS AND INSTALLATION TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and

More information

P2784 3" (76.2) (31.8) 25 to 45 PFL2-37

P2784 3 (76.2) (31.8) 25 to 45 PFL2-37 P289 (2.0) (.) 2 (.2) 2 (2.4) 2 (.2) hreaded esign (Safety Factor of 4) (angles 2 ) - 0 Lbs (2.4 kn) ) - 0 Lbs (.4 kn) Safety Factor 4 orque: Ft-Lbs (8 N m) PFL2- to (.2 to 9.) 2 2 2 2 to 4 t/00 : Lbs

More information

Aeroquip Rynglok Tube Repair System

Aeroquip Rynglok Tube Repair System Aeroquip Rynglok Tube Repair System The system of choice for aerospace hydraulic tubing repair Approved by Boeing, Airbus, major airlines, and all branches of the U.S. military The new tube fitting performance

More information

Pressure transmitter for general industrial applications Model A-10

Pressure transmitter for general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology

More information

RELINER INSIDE DROP SYSTEM SPECIFICATIONS

RELINER INSIDE DROP SYSTEM SPECIFICATIONS 1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme

More information

Huck 360. Advanced Fastening System. Free-spinning installation Absorbs high spike loads Vibration and fatigue resistant. 3/8" 1-3/8", 10mm 36mm

Huck 360. Advanced Fastening System. Free-spinning installation Absorbs high spike loads Vibration and fatigue resistant. 3/8 1-3/8, 10mm 36mm Huck 360 Advanced Fastening System Free-spinning installation Absorbs high spike loads Vibration and fatigue resistant 3/8" 1-3/8", 10mm 36mm Huck 360 System The engineered nut-and-bolt fastening system

More information

Pressure transmitter for general industrial applications Model A-10

Pressure transmitter for general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology

More information

'Mutiny' Ozone Reactor Kit

'Mutiny' Ozone Reactor Kit 'Mutiny' Ozone Reactor Kit Skill Level: Beginner Tools Required: Scissors or razor blade Other Materials: Teflon tape Time to Build: Approximately 1 hour not including drying time Version: 2012 spray nozzle

More information

Assembly instructions

Assembly instructions Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions

More information

PROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING

PROCHEM INSTRUMENTATION. Product solutions for a world of difference BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES MANUFACTURING PROCHEM Product solutions for a world of difference PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES HYDRAULIC The World of Prochem PIPING PRODUCTS VALVES MANUFACTURING INDENT & PROJECT SERVICES

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping

More information

Type F-20-3A Sanitary Pressure Transmitter NEMA 4X with Integral Junction Box

Type F-20-3A Sanitary Pressure Transmitter NEMA 4X with Integral Junction Box Type F-20-3A Sanitary Pressure Transmitter NEMA 4X with Integral Junction Box Applications Food and beverage industry Pharmaceutical industry Biotechnology industry Cosmetic industry Special Features Meets

More information

New Product Release: October 2014 Boone Racks

New Product Release: October 2014 Boone Racks New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance

More information

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity

More information

W-K-M Model MA-1 DynaCentric Butterfly Valve

W-K-M Model MA-1 DynaCentric Butterfly Valve Page 1 of 16 R E P A I R M A N U A L W-K-M Model MA-1 DynaCentric Butterfly Valve Page 2 of 16 Published October 2001 W-K-M and DynaCentric are trademarks of Cooper Cameron Corporation Cooper Cameron Corporation,

More information

Kit 102 Series Installation Instructions for Wood or Metal Posts on Level Runs

Kit 102 Series Installation Instructions for Wood or Metal Posts on Level Runs Kit 102 Series Installation Instructions for Wood or Metal Posts on Level Runs A. Drill Posts Hole size for 1/8" or 3/16" cable installation This kit may also be used for stairs or runs that exit the end

More information

PROCHEM Stainless Steel Specialists

PROCHEM Stainless Steel Specialists PROCHEM Stainless Steel Specialists Product solutions for a world of difference INSTRUMENTATION BUTECH PIPING PRODUCTS INSTRUMENTATION VALVES AND ACTUATORS MANUFACTURING INDENT SERVICE HYDRAULIC PROCHEM

More information

RG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable)

RG Connector (Molded Mating Extension Cable Required) A H B G. MS Connector (Mating Connector: P/N ; MS3116F-12-10S or Extension Cable) T E M P O S O N I C S L S E R I E S INSTALLATION A N A L O G O U T P U T 550570 B W I R I N G - A N A L O G O U T P U T S RG Connector: (Voltage or Current Output) 1 Gray 0 to 10 Vdc, 4 to 20 ma, or 0

More information

Brass Compression Fittings

Brass Compression Fittings 15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended

More information

Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher

Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand

More information

Plumbing Part II - Hand Pump

Plumbing Part II - Hand Pump Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail

More information

Pressure transmitter For general industrial applications Model A-10

Pressure transmitter For general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology

More information

ISO B-Profile 60-Series. Body Size 1/8" up to 2 1/2" ISO B. ISO Standard. Ball Locking. Medium Pressure

ISO B-Profile 60-Series. Body Size 1/8 up to 2 1/2 ISO B. ISO Standard. Ball Locking. Medium Pressure Ball Locking ISO B ISO 7241-1 Series B 1/8" up to 2 1/2" ISO B-Profile Working Pressure Low Cycle, non-pulsating pressure rating Steel Stainl. Steel Brass 1/8" 350 bar 350 bar 210 bar 1/4" 350 bar 350

More information

Pressure measurement PBMR Fully welded pressure transmitter for railway applications

Pressure measurement PBMR Fully welded pressure transmitter for railway applications Fully welded pressure transmitter for railway Product highlights Ecellent accuracy and long term stability up to % FS Active temperature compensation over the entire operating temperature range Sensor

More information

Miniature Steam Pty Ltd (Incorporating Live Steam Supplies)

Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right

More information

MODELS 49 RA 49 RAZ 49 RAC

MODELS 49 RA 49 RAZ 49 RAC General Safety and Maintenance Manual MODEL grinder featuring a rear exhaust. Model Number Exhaust Direction REAR Throttle Type (L) Lever or (K) Safety Lever Speed 12000 to 14000 R.P.M (13500rpm is standard)

More information

FLARELESS SEPARABLE FITTING

FLARELESS SEPARABLE FITTING FLARELESS SEPARABLE FITTING DESIGN CONCEPT: The concept of Flareless provides positive sealing and a high degree of sealing reliability for repeated usage. The configuration of Flareless joint consists

More information

Super-Screw types Belt thickness, in. 5/32-1/2 5/32-1/2 5/32-19/32 5/32-19/32 5/32-14/32 9/32-13/16 9/32-3/4

Super-Screw types Belt thickness, in. 5/32-1/2 5/32-1/2 5/32-19/32 5/32-19/32 5/32-14/32 9/32-13/16 9/32-3/4 SUPER-SCREW Lacing What is it? SUPER-SCREW : Fastener/Splice and Patch Minet Lacing Technology s flagship product is the. Having achieved great success with conveyor belt installations and repairs, stands

More information

Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H

Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments Model IS-20-H Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for highest pressure applications in hazardous environments WIKA Data Sheet PE 81.51 Applications

More information

Throttle Type. per Minute Inches (412 mm) (L) Lever

Throttle Type. per Minute Inches (412 mm) (L) Lever HENRY TOOLS Industrial Airtools at Work General Safety and Maintenance Manual Model Number Bore and Stroke 1.0 Inch x 2.0 Inch (25 mm x 51 mm) Throttle Type (L) Lever Blows Length per Minute 2500 16.2

More information

tubing & fittings section guide

tubing & fittings section guide tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing

More information

INDUSTRIAL VACUUM COMPONENTS

INDUSTRIAL VACUUM COMPONENTS A H I G H - P E R F O R M A N E O M P A N Y INDUSTRIAL VAUUM OMPONENTS TUBING, BENDS, OUPLINGS & FITTINGS H-P Products is certified to ISO 9001:2008 Services. arbon Stainless Zinc-oated Table of ontents

More information

Screw-in resistance thermometers with plug connector

Screw-in resistance thermometers with plug connector Data Sheet 90.2004 Page 1/7 s with plug connector for temperatures from -50 to +300 C highly resistant to shock and vibration connector locked in for reliable contact, IP65 or IP69K protection available

More information

DK-Lok UHP Fittings. No.09-01(K) May 2017

DK-Lok UHP Fittings. No.09-01(K) May 2017 K-ok UP Fittings No.09-01(K) May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM 05 05 ong Reducing ee WR ong ross ee WX 08 09 Socket Wed Short Gand GSS ube dapter Gand G 13 14 Micro

More information

SR-1.0 Manual, a.doc 11/14/2006 Page 1 of 17

SR-1.0 Manual, a.doc 11/14/2006 Page 1 of 17 SR-1.0 Manual, 20061108a.doc 11/14/2006 Page 1 of 17 ASSEMBLY INSTRUCTIONS, MODEL SR-1.0 EXTRUSION HEAD STREAMLINE EXTRUSION, INC. Following is a set of photos and verbal descriptions for assembling the

More information

IF YOU DON T SEE IT HERE

IF YOU DON T SEE IT HERE www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex

More information

ONASSIS SHOWER SET INSTALLATION

ONASSIS SHOWER SET INSTALLATION SKU(s): 925939 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,

More information

Pharma Temperature Sensor G3/8"

Pharma Temperature Sensor G3/8 SENSORS FOR FOOD AND BIOPHARMA. Product Information TFP-58P, -68P, -168P, -188P PHARMA Pharma Temperature Sensor G3/8" Application/Specified usage Aseptic temperature measurement, inline, high precise

More information

REPLACING THE CAT SEAL IN THE 90AD EXTRUDER

REPLACING THE CAT SEAL IN THE 90AD EXTRUDER T S B D S D 0 0 0 4 T E C H N I C A L S E R V I C E B U L L E T I N REPLACING THE CAT SEAL IN THE 90AD EXTRUDER 1-8 0 0-2 7 8-3 3 5 3 w w w. j c s t e e l e. c o m 2018 J.C. Steele & Sons, Inc. SAFETY

More information

Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves

Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves Mounting Instructions For 3-Piece Namur Style Mounting Bracket To 2-Way 60 Series Valves NOTE: These instructions apply only to 60 series ball valves with bodies containing external mounting nibs. External

More information

Table Of Contents Casing Head 02 Christmas Tree & Tubing Head Tubing Spool 04 Contact Us

Table Of Contents Casing Head 02 Christmas Tree & Tubing Head Tubing Spool 04 Contact Us Table Of Contents Casing Head 02 Christmas Tree & Tubing Head 03 Tubing Spool 04 Contact Us 05 1 www.sapwellsglobal.com Casing Head Specialized large-diameter pipe lowered into an open hole and cemented

More information

INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS

INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS PIEDMONT PACIFIC CORPORATION INSTALLATION MANUAL FOR STAINLESS STEEL, GROOVE-END, FLEXIBLE COUPLINGS 4703 Tidewater Ave., Suite G Oakland. CA, 94601, USA Ph: +1 510 434 0990 / Fax: +1 510 436 0990 www.piedmontpacific.com

More information

Precision Chucks for Improved Accuracy and Increased Productivity

Precision Chucks for Improved Accuracy and Increased Productivity Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open

More information

Parts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters

Parts List 4 MODEL T-18 and T-27 Mark II Turbo-Meters MP-1070A Rev. 9 Invensys Energy Metering 80 Liberty Boulevard DuBois, PA 15801 Telephone (814) 371-8000 FAX (814) 375-8460 Parts List 4 Model T-18 and T-27 Mark II Turbo-Meter Parts List 4 MODEL T-18 and

More information

HBS-AP ASSEMBLING INSTRUCTIONS

HBS-AP ASSEMBLING INSTRUCTIONS ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,

More information

Flexicon Flexible Conduit, Glands and Clamps

Flexicon Flexible Conduit, Glands and Clamps Flexicon Flexible Conduit, Glands and Clamps by Unipart Rail Flexible conduit designed and accepted for use in Class II equipment and in Flood Prone areas Network Rail Approved SERVING THE WORLD S RAILWAYS

More information

Pressure transmitter For general industrial applications Model A-10

Pressure transmitter For general industrial applications Model A-10 Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding

More information

The GAK using Ziv s GAK in the box

The GAK using Ziv s GAK in the box The GAK using Ziv s GAK in the box By Webslinger The Gonzo Air Kit or GAK has been around for a long time as a "Do-It-Yourself" performance modification. This is probably the least expensive way to increase

More information

3-1/4 HP VARIABLE SPEED PLUNGE ROUTER

3-1/4 HP VARIABLE SPEED PLUNGE ROUTER IMPORTANT INFORMATION 2-YEAR LIMITED WARRANTY FOR THIS PLUNGE ROUTER KING CANADA TOOLS OFFERS A 2-YEAR LIMITED WARANTY FOR NON-COMMERCIAL USE. 3-1/4 HP VARIABLE SPEED PLUNGE ROUTER PROOF OF PURCHASE Please

More information

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)

DMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0) DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity

More information

CombiTemp TCR6 Standard RTD temperature sensor

CombiTemp TCR6 Standard RTD temperature sensor Main features Sensor and connection in stainless steel, ISI 6 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating systems Water

More information

3 POINT HITCH LOGSPLITTER

3 POINT HITCH LOGSPLITTER 3 POINT HITCH LOGSPLITTER OPERATOR S MANUAL AND PARTS LIST TABLE OF CONTENTS SECTION PAGE 1. GENERAL INFORMATION 1 2. SAFETY GUIDELINES 2 2.1 DEFINITIONS 2 2.2 SAFE OPERATING PROCEDURE 3 3. LOG SPLITTER

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)

More information

Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

Main Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A. Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00

More information

INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS

INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS CLAMP MOUNT SKIRTING SYSTEM CLAMP MOUNT/ DURA-SEAL / TRACKEEPER / VACU-SKIRT INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS Check us out at www.asgco.com Customer Service 800-344-4000 800-394-2358

More information

MAKE SURE THE PIPE FITS

MAKE SURE THE PIPE FITS Figure 1 MAKE SURE THE PIPE FITS Pipe thread fittings in aviation BY CAROL AND BRIAN CARPENTER PIPE THREADS ARE USED in virtually every aircraft built today, from ultralights to Boeing s finest. In sport

More information

Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015

Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015 Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)

More information

Mounting Systems & Hydro-Grip

Mounting Systems & Hydro-Grip Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering

More information

XT Technical Documentation. The magnetostrictive level sensor. Edition: Version: 1 Article no.:

XT Technical Documentation. The magnetostrictive level sensor. Edition: Version: 1 Article no.: Technical Documentation The magnetostrictive level sensor Edition: 11-2010 Version: 1 Article no.: 233571 Gems Sensors & Controls One Cowles Rd Plainville CT Telephone 800-378-1600 Page 2/19 Table of contents

More information

Reliance SG777 Series Steel Water Gage Valves

Reliance SG777 Series Steel Water Gage Valves Installation, Operation, & Maintenance Instructions R500.SG777 10/16/2016 Reliance SG777 Series Steel Water Gage Valves Note: Design variations in Steel Water Gage Valves necessitate typical illustrations,

More information

Ford Couplings For Pipe And Tubing

Ford Couplings For Pipe And Tubing Section J 6/2002 Ford Couplings For Pipe And Tubing The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas

More information

RPE Parallel Gripper- Electric Gripper Series

RPE Parallel Gripper- Electric Gripper Series 1.14 RPE Parallel Gripper- Electric Gripper Series Failsafe Operation: Spring closed feature allows for full grip force during power off conditions. Electrically Actuated: Requires simple 24VDC pulsed

More information

SERVICE INSTRUCTIONS

SERVICE INSTRUCTIONS SERVICE INSTRUCTIONS TURBINE MIXER MODEL TO, TCL & TC DRIVE SERIES F MANUAL NO. 05-47775 REVISED 03/2016 CUSTOMER: P.O. NO.: ITEM NO.: MIXER MODEL NO.: MIXER SERIAL NO.: DRIVE SERIES & SIZE: INPUT ASSEMBLY

More information

Huck 360 Advanced Fastening System

Huck 360 Advanced Fastening System Huck 360 Advanced Fastening System Free-spinning installation Absorbs high spike loads Vibration and fatigue resistant 3/8" 1-3/8", 10mm 36mm Huck 360 System The Engineered Nut-and-Bolt Fastening System

More information

VISES, BASES, PALLETS & TOMBSTONES AXIS WORKHOLDING]

VISES, BASES, PALLETS & TOMBSTONES AXIS WORKHOLDING] [ 5,, PLL & OMON OROLN] MaxLock P40, P440, & P460 ises vailable with errated, ovetail (), or arvable [] jaws. errated and ovetail jaws have different clamping areas, at the bed, in the middle of the jaw

More information

FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.

FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior

More information

PIPE/CONDUIT SUPPORTS

PIPE/CONDUIT SUPPORTS PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120

More information

RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes

RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight

More information

Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4

Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4 I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)

More information

MM22 Enclosure Mount C228M-B (4/14)

MM22 Enclosure Mount C228M-B (4/14) I N S T A L L A T I O N MM22 Enclosure Mount C228M-B (4/14) Important Safety Instructions 1. Installation and servicing should be done only by qualified service personnel and conform to all local codes.

More information

HT-Series Hydraulic Couplings

HT-Series Hydraulic Couplings Interchange Data: Interchangeable to ISO16028 Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series 'A', Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Materials: Machined

More information

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up

VIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will

More information

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34. MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines

More information

FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"

FORGED BRASS & STEEL FITTINGS NPT and NPT 45 SAE FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male

More information

PIONEER TRADING CO., LTD.

PIONEER TRADING CO., LTD. PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,

More information

HEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820

HEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820 HEMI / BB Chrysler Installation Manual For Systems with A/C #14800 / #14820 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 PLEASE READ

More information