COMPRESSION TUBE FITTINGS

Size: px

Start display at page:

Download "COMPRESSION TUBE FITTINGS"

Horace Reynolds
5 years ago
Views:

1 PRESSI UBE FIIGS

he ASAK product offering has been developed to further support the requirements of the market.

2 PRESSI UBE FIIGS Since 1956, ASAVA BV has served the worldwide client base with instrumentation solutions. As a result of our tremendous efforts in research and development, Astava continues to grow their excellent reputation as a leading manufacturer in this industry. he ASAK product offering has been developed to further support the requirements of the market. ASAK tube fittings have been precision manufactured to the highest quality-control standards and skilled craftsmanship to withstand the persistent demands for high- performance tube fittings. 1 he ASAK tube fitting is an advcanced mechanism used to seal and grip tubing, producing a leak-tight assembly. Part of the ASAK family of connectors developed to fill the rapidly increasing demand for tube fittings that can withstand high pressure and vacuum use, the fitting is suitable for a range of harsh environments such as petrochemical, fluid, power, nuclear, electronic, and in other major industrial settings. All ASAK tube fittings have undergone a stringent tolerance test for pressure, vacuum and temperature. hese precision machined fittings are manufactured using the most cutting-edge computerized automation, enabling the company to maintain manufacturing excellence across high volumes. All ASAK fittings are backed by ASAVA s commitment to the highest quality-control standards he ASAK fitting is assembled as follows: 1. Insert the tube into the complete assembly until the tube reaches the shoulder of the fitting body (1). 2. urn the nut 1 ¼ turn / 3/4 turn depened on tube size from the Finger tight position. 3. he mechanical force created will drive the two ferrules forward between the nut (4) and fitting body (1). he back ferrule (3) will be driven against the tapered rear of the front ferrule (2) and the front ferrule will be forced into the tapered mouth of the body. 4. he back ferrule is then swaged radially inwards on the tube while lifting the front ferrule out to form a fullfaced seal on the tapered surface of the body. ASAK connectors can be assembled /disassembled repeatedly without losing the leak-tight seal: 1. Before disconnection the position of nut in relation to the fitting body should be marked. 2. When re-assembling, tighten the nut to its original position using a wrench. 3. ighten the nut slightly until a slight increase of tightening torque is felt. ube Fittings onsists f Four Parts: 1. Body 2. Front Ferrule 3. Back Ferrule 4. ut 2

ASAK FIIGS ISAAI ISRUI ASAK fittings when supplied assembled at finger tight. isassembly before use might lead to entry of dirt or various contaminations.

Insertion of the tube into the ASAK fitting: ake sure that tube rests firmly on the fitting shoulder and the nut is finger tightened. ark a short line on the nut hex, extended onto the fitting body.

3 ASAK FIIGS ISAAI ISRUI ASAK fittings when supplied assembled at finger tight. isassembly before use might lead to entry of dirt or various contaminations. General Precautions Avoid dragging tubes on the floor. Avoid dragging tubes out of the tubing rack. his applies especially for large. tubes. opper ubing When using copper tubes from a roll, the roll should be rolled outwards while holding the tube end and allow the tube to lie on a flat surface. Insertion of the tube into the ASAK fitting: ake sure that tube rests firmly on the fitting shoulder and the nut is finger tightened. ark a short line on the nut hex, extended onto the fitting body. he marked line is intended for designation of the pull-up starting point. ut ightening: For 1/4 (6mm) or higher tube tighten the nut by 1¼ turn. (See figure A) For 3/16 (4mm) or lower tighten the nut by a ¾ turn. (See figure B) Figure A Figure B Space Gauge he ASAK Space Gauge is intended to verify proper gap between the nut and the body thus ensuring proper assembly of the fitting. he ASAK Space Gauge is used for tubing sizes in the range of 6mm 25mm (1/4" 1"). If the gauge can be entered between the nut and the body, turn the nut further more to reduce the gap until gauge entry is not possible. ASAK onnectors Assembly/isassembly ASAK connectors can be assembled / disassembled repeatedly without losing the leak-tight seal: 1. Before disconnection the position of nut in relation to the fitting body should be marked. 2. When re-assembling, tighten the nut to its original position using a wrench. 3. ighten the nut slightly until a slight increase of tightening torque is felt. 4. rise in torque is felt. ube utting wo methods are used for tube cutting: 1. Using a tube cutter 2. acksaw ube utter he tube must be cut squarely in order to obtain a leak free connection. Use a good quality tube cutter with a blade properly adapted to the tube material. Avoid eliminating cutting time by deepened cuts each turn, as it may result by tube hardening. In order to avoid fitting damage and ensure that tube reaches the fitting bottom, deburr the tube end by a deburring tool. acksaw utting Use guide blocks in order to cut the tube with a hacksaw and get square ends. acksaw cutting requires deburring the tube ends by a deburring tool. Warning Avoid holding the tube in a vise at the point where it enters the fitting. (he vise may leave a splat mark on the tube which may result by a leak or tube ovality). AIIA SIZES: ASAK SIZE Space Gauge 1/16 Space Gauge 1/8-2-3 mm Space Gauge 3/16-4 mm Space Gauge 5/16-8 mm Space Gauge 10 mm Space Gauge 5/ mm Space Gauge 3/4-18 mm Space Gauge 7/ mm Space Gauge 1-25 mm he following table specifies the available ASAK gauges: aution! It is of great importance to handle the tube carefully in order to avoid scratches which increase the risk of leaks. ASAK PRESSI UBE FIIGS 3

ASAK FIIGS ISAAI ISRUIS Physical ifferences And arkings ASAK etric Fittings: ee & Elbow & ross (see Fig. 1) Body marked: Straight onnectors: (see Fig.

1 & 2) Stepped shoulder arked: ASAK 316 6 (b) AB3 (a) ASAK 316 6 AB3 ASAK 316 Z3 ASAK Fittings ubing ata Assuring maximum fitting reliability and performance is achieved by taking a great care when

ube wall thickness 3. ube hardness 4. ube surface finish quality he ordered tubes must comply with AS A213 or AS A269 standards, be fully annealed and seamless. Fig.

ASAK I FIIGS: ee & Elbow & ross (see Fig. 3) Straight Fittings: (see Fig. 4) Body: Shoulder marked: ASAK 316 B8 (a) ut: (See Fig. 3 & 4): Shoulder marked ASAK 316 1/2 (b) 6 (a) ASAK 316 1/4 6 UBE.

4 ASAK FIIGS ISAAI ISRUIS Physical ifferences And arkings ASAK etric Fittings: ee & Elbow & ross (see Fig. 1) Body marked: Straight onnectors: (see Fig. 2) Body: Stepped shoulder arked: ASAK 316 Z3 (a) ut: (see Figs.1 & 2) Stepped shoulder arked: ASAK (b) AB3 (a) ASAK AB3 ASAK 316 Z3 ASAK Fittings ubing ata Assuring maximum fitting reliability and performance is achieved by taking a great care when selecting the proper tube for a specific given application. ube Selection When ordering tubes for use with ASAK fittings the following parameters should be kept in mind: 1. ube material 2. ube wall thickness 3. ube hardness 4. ube surface finish quality he ordered tubes must comply with AS A213 or AS A269 standards, be fully annealed and seamless. Fig. 1: Back side (a) aterial Batch (b) ube.. Fig. 1: Front side Fig. 2 Stepped Shoulder Additional requirements for the selected tubes are: Suitable for bending Suitable for bending Free of scratches. ASAK I FIIGS: ee & Elbow & ross (see Fig. 3) Straight Fittings: (see Fig. 4) Body: Shoulder marked: ASAK 316 B8 (a) ut: (See Fig. 3 & 4): Shoulder marked ASAK 316 1/2 (b) 6 (a) ASAK 316 1/4 6 UBE.. ERAES 1/16-1/8 2mm - 3 mm 3/16-1 1/4 4mm - 25 mm 1 1/2-2 38mm - 50 mm ± ± ± mm mm mm Fig. 3: Back side Fig. 3: Front side Fig. 4 ASAK 316 B8 vality of twice the. tolerance is unacceptable for ASAK fittings. he tube must be round. ube ends must be burrs free. ube hardness should be lower than the fitting material hardness and not exceeding Rockwell 90 RB (200V). (a) aterial Batch (b) ube.. Installation at extreme conditions applications For severe conditions and high pressure applications the following installation procedure is recommended: 1. Verify that the nut is finger tight. 2. Insert the tube up to the shoulder. 3. Using a wrench turn the nut until the tube does not rotate freely. 4. ark the nut and tube relative position. 5. Rotate the nut 1¼ turns from the marking point. he above procedure is intended to ensure that the ferrules will be in contact with the tube after the full 1¼ turn even in a case where the tube. is at its minimum tolerances 4

UBIG AA ABE 1: SAIESS SEE I UBIG ubing.. WA IKESS F UBE I I inch 0.010 0.012 0.014 0.016 0.020 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.120 0.134 0.156 0.

5 UBIG AA ABE 1: SAIESS SEE I UBIG ubing.. WA IKESS F UBE I I inch / / / / / / / /8 Working pressure (psig) for seamless tubing; /4 ultiply pressure rating by for single welded tubing. 7/8 ultiply pressure rating by for double welded tubing / / he required tube material is annealed 304 or 316 stainless steel complying with AS A213, A269 standards or equivalent specifications. When metal temperature is in the range of -20 F 100 F ( ), use table 1 and 2. Example of ordering recommended: igh quality (304 or 316) stainless steel hydraulic tubing AS 269 or A213 fully annealed. he tubes welded or seamless, drawn 90 RB (200V) hardness or less. he tubes should be suitable for flaring and bending with no scratches. ABE 2: SAIESS SEE ERI UBIG ubing.. WA IKESS F UBE I mm Working pressure (bar) for seamless tubing; ultiply pressure rating by.80 for single welded tubing. ultiply pressure rating by.85 for double welded tubing WARIG! he system designer and user have the sole responsibility to select products suitable for their special application requirements and to ensure the proper installation, operation and maintenance of the product. Please consider application details, material compatibility and product ratings when making your selection. Improper selection or use of products can cause property damage or personal injury. ASAK PRESSI UBE FIIGS 5

6 UBIG AA ABE 3: PPER UBIG WA IKESS F UBE I IES ubing mm inch 2 1/ / / / / / / / / he tubes are annealed copper seamless tubes, which comply with AS B68 and AS B75 standards (based on ultimate tensile strength of psi (2067 bar) and as specified in temper designation 060). When metal temperature is in the range of the following ordering information is recommended: Soft annealed seamless copper high quality tubes AS B75 or any equivalent ABE 4: FARS USE EERIE AWABE PRESSURE A IGER EPERAURES F A.I.S.I. 316 opper For determining the allowable pressure at high temperature the allowable working pressure specified in tables 1,2 and 3 should be multiplied by factor taken from able 4. As for example estimating allowable pressure for tube type 316 stainless steel of size 1/2 x0.049 wall thickness at 800 F (427 ) is equivalent to: 3750 psi x 0.79= psi ABE 5: GAS APPIAI UBIG I ERI ubing.. in. ominal Wall hickness ubing.. in. ominal Wall hickness 1/ mm 0.8 mm 3/ mm 0.8 mm 1/ mm 1.0 mm 5/ mm 1.0 mm 3/ mm 1.0 mm 1/ mm 1.2 mm 5/ mm 1.5 mm 3/ mm 1.5 mm 7/ mm 1.8 mm mm 2.0 mm 1 1/ mm 2.2 mm 1 1/ mm 3.5 mm mm 5.0 mm For gas applications, where it is recommended to select tubes with a greater wall thickness as gases are characterized by small molecules, which might escape even through the smallest leak path. able 5 presents recommended wall thicknesses which assures a greater safety and efficiency are presented in. 6

7 PRESSURE RAIGS Pressure Ratings for ASAVA ube Fittings In order to ensure leak tight systems, it is important to select carefully high quality tubes according to page 5 - allowable working pressure. Pressure Rating for End Fitting per SAE J1926 (S) Ambient emperature Based on SAEJ1926 at ambient temperature. Pipe End hread Pressure Ratings (P and IS 7) ABE 6: PRESSURE RAIGS P / IS Stainless Steel 316 Brass Pipe Size ale Female ale Female inch psi 1/ / / / / / / / ote: When the pressure on the ASAK end is higher than on the pipe side, a heavier wall thickness of the tapered pipe thread side is required. ABE 7: PRESSURE RAIGS (S) Stainless Steel 316 SAE J1926 hread Size onpositionable Positionable inch psi 5/ / / / / / / / / / / / ote: 37 FARE (A) and ends can have lower pressure -Seal Pressure Ratings (page 45) Stainless steel 316 -seal fittings up to 1 and 25mm are rated to pressure of 3000 psi. Positionable IS/BSP Parallel hread (G) Pressure Ratings Pressure ratings are at ambient temperature. ABE 8: PRESSURE RAIGS (G) IS / BSPP ale Pipe Size inch Stainless Steel 316 psi 1/ / / / / ASAK PRESSI UBE FIIGS 7

8 IEX BF 10 SUR 13 F 20 P 29 S 38 E 43 BAK FERRUE REUIG UI FEAE ER (P) PR ER AE ER (SAE) AE EBW (P) FF 10 U 15 FR P 40 ER 45 FR FERRUE UI EE FEAE ER (BSP) AE ER (P) AE ER AE EBW (BSP) I 11 UR 16 FG 24 R E 46 UBE ISER REUIG EE FEAE ER (BSPP) AE ER (BSP) AE ER AE PIPE WE EBW 11 EU 18 SPR 25 G EW 47 U UI EBW REUER AE ER (BSPP) AE PIPE WE ER UBE SKE WE EBW SU 12 EUR 19 PR 28 K 37 W 42 EPR 47 UI REUIG UI EBW REUIG PR ER AE ER (BSPP) UBE SKE WE UI REUIG EBW

ASAK PRESSI UBE FIIGS EF 48 BU 53 R 57 PR 64 SAF 68 71 FEAE EBW BUKEA UI UI RSS AE AAPER UBE PIPE (BSP) ASAK A AAPER PSIIABES R 49 FB 54 58 PG 65 UA 68 SU-IA 79 AE RU EE BUKEA FEAE ER AP AE AAPER UBE

9 ASAK PRESSI UBE FIIGS EF 48 BU 53 R 57 PR 64 SAF FEAE EBW BUKEA UI UI RSS AE AAPER UBE PIPE (BSP) ASAK A AAPER PSIIABES R 49 FB PG 65 UA 68 SU-IA 79 AE RU EE BUKEA FEAE ER AP AE AAPER UBE PIPE (BSPP) ASAK A UI UI IEERI FR 50 RB 54 P 59 P 66 UBA FEAE RU EE BUKEA REUER PUG WE AAPER UBE PIPE ASAK A BUKEA UI ASAVA ASSEBY B 51 B 55 PF 60 PW 66 PA AE BRA EE BUKEA AE ER FEAE AAPER UBE PIPE SKE WE AAPER AE AAPER UBE A GAUGE AR FB 52 RUB 56 P 62 PSAE 67 PS 70 FEAE BRA EE BUKEA REUIG UI AE AAPER UBE PIPE (P) AE AAPER (SAE) PARAE REAS SEAIG ASAK W RER Example: I / - SS - SUR Inch or ilimetric ube Ends aterial escription SS - Stainless Steel 316 B - Brass - Alloy Alloy -276 S - Alloy 2507 Fitting escription Size Size

BAK FERRUE BF FR FERRUE FF ERI rdering ube.

rdering inch ube.. mm I- -BF-01 1/16 1.58 I- -BF-02 1/8 3.17 I- -BF-03 3/16 4.76 I- -BF-04 1/4 6.35 I- -BF-05 5/16 7.93 I- -BF-06 3/8 9.52 I- -BF-08 1/2 12.70 I- -BF-10 5/8 15.87 I- -BF-12 3/4 19.

. mm - -FF-02 2 - -FF-03 3 - -FF-04 4 - -FF-06 6 - -FF-08 8 - -FF-10 10 - -FF-12 12 - -FF-14 14 - -FF-15 15 - -FF-16 16 - -FF-18 18 - -FF-20 20 - -FF-22 22 - -FF-25 25 - -FF-38 * 38 - -FF-50 * 50 I

10 BAK FERRUE BF FR FERRUE FF ERI rdering ube.. mm - -BF BF BF BF BF BF BF BF BF BF BF BF BF BF BF-38 * BF-50 * 50 I rdering inch ube.. mm I- -BF-01 1/ I- -BF-02 1/ I- -BF-03 3/ I- -BF-04 1/ I- -BF-05 5/ I- -BF-06 3/ I- -BF-08 1/ I- -BF-10 5/ I- -BF-12 3/ I- -BF-14 7/ I- -BF I- -BF-20 * 1 1/ I- -BF-24 * 1 1/ I- -BF-32 * ERI rdering ube.. mm - -FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF-38 * FF-50 * 50 I rdering ube.. inch mm I- -FF-01 1/ I- -FF-02 1/ I- -FF-03 3/ I- -FF-04 1/ I- -FF-05 5/ I- -FF-06 3/ I- -FF-08 1/ I- -FF-10 5/ I- -FF-12 3/ I- -FF-14 7/ I- -FF I- -FF-20 * 1 1/ I- -FF-24 * 1 1/ I- -FF-32 * *Without Ferrule Set. *Without Ferrule Set. FERRUE SES All ASAK Ferrules are available as sets. Ferrule sets simplify stocking and assembly. Ferrule sets prevent damage of single ferrules during shipping. he back and front ferrules are arranged as pairs in the set; ready for easy assembly. FERRUE & U SES All ASAK Ferrules and nut are available as sets. Ferrule sets simplify stocking and assembly. Ferrule sets prevent damage of single ferrules during shipping. he back front ferrule and nut are arranged as set; ready for easy assembly. RERIG IFRAI FR FERRUE SES Example: I/ SS SS 04 Inch or etric aterial description SS Stainless Steel 316 SS Brass Alloy 400 Alloy -276 S Alloy 2507 Ferrule Sets Size RERIG IFRAI FR FERRUE & U SES Example: I/ SS FSE 04 Inch or etric aterial description SS Stainless Steel 316 SS Brass Alloy 400 Alloy -276 S Alloy 2507 Ferrule & nuts sets Size 10 imensions are for reference only, and are subject to change without notice.

11 UBE ISER I ERI rdering ube.. 1 ube I.. mm mm mm - -I I I I I I rdering ube.. 1 ube I.. inch mm inch mm inch mm I- -I_ / / I- -I_ / / I- -I_ / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / / I- -I_ / U ERI rdering ube.. ex. Flat mm mm mm inch 54.0 I rdering ube.. ex. Flat inch mm inch inch mm I / / I / / I / / I / / I / / I / / I / / I / I / / I / / I / I / / I / / I ASAK PRESSI UBE FIIGS 11 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

12 UI SU UBE (ERI) UBE (ERI) rdering ube.. ex. Flat mm mm mm mm mm mm - -SU SU SU SU SU SU SU SU SU SU SU SU SU SU SU-38 * SU-50 * inch UBE (I) UBE (I) rdering ube.. ex. Flat inch mm inch mm inch inch mm inch mm inch mm I- -SU-01 1/ / I- -SU-02 1/ / I- -SU-03 3/ / I- -SU-04 1/ / I- -SU-05 5/ / I- -SU-06 3/ / I- -SU-08 1/ / I- -SU-10 5/ / I- -SU-12 3/ / I- -SU-14 7/ / I- -SU / I- -SU-20 *1 1/ / I- -SU-24 *1 1/ / I- -SU-32 * / * For low friction paste, see page imension is minimum opening. imensions are for reference only, and are subject to change without notice.

13 REUIG UI SUR UBE (ERI) UBE (ERI) rdering ube.. 1 ube.. ex. Flat 1 mm mm mm mm mm mm mm mm - -SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR SUR * SUR * UBE (ERI) UBE (I) rdering ube.. 1 ube.. ex. Flat 1 mm inch mm mm mm mm mm mm I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / I- -SUR / * For low friction paste, see page ont d next page ASAK PRESSI UBE FIIGS 13 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

REUIG UI SUR UBE (I) UBE (I) rdering ube.. 1 ube. ex. Flat 1 inch mm inch mm inch mm inch inch mm inch mm inch mm inch mm I- -SUR-02-01 1/8 3.17 1/16 1.58.05 1.27 7/16.81 20.57 1.22 30.98.50 12.7.34 8.

14 REUIG UI SUR UBE (I) UBE (I) rdering ube.. 1 ube. ex. Flat 1 inch mm inch mm inch mm inch inch mm inch mm inch mm inch mm I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / / I- -SUR / / I- -SUR / / * For low friction paste, see page imension is minimum opening. imensions are for reference only, and are subject to change without notice.

15 UI EE U A UBE (ERI) rdering ube.. Wrench Flat mm mm inch mm mm mm mm - -U / U / U / U / U / U / U / U / U / U / U / U / U / U / U-38 * U-50 * / A UBE (I) rdering ube.. Wrench Flat inch mm inch mm inch mm inch mm inch mm inch mm I- -U-01 1/ / I- -U-02 1/ / I- -U-03 3/ / I- -U-04 1/ / I- -U-05 5/ / I- -U-06 3/ / I- -U-08 1/ / I- -U-10 5/ / I- -U-12 3/ / I- -U-14 7/ / I- -U / I- -U-20 *1 1/ / I- -U-24 *1 1/ I- -U-32 * / * For low friction paste, see page 81 ASAK PRESSI UBE FIIGS 15 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

REUIG EE UR A UBE (ERI) rdering ube.. 1 ube.. 1 1 Wrench Flat mm mm mm mm mm mm mm inch mm mm mm - -UR-08-08-06 8 6 29.9 29.8 16.2 15.3 4.8 5/8 15.9 22.4 22.4 - -UR-10-10-06 10 6 31.5 31.3 17.2 15.3 4.8 11/16 17.

16 REUIG EE UR A UBE (ERI) rdering ube.. 1 ube Wrench Flat mm mm mm mm mm mm mm inch mm mm mm - -UR / UR / UR / UR / UR / UR / UR *50 * / A UBE (I) rdering ube.. 1 ube. 1 1 Wrench Flat inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / I- -UR / / I- -UR / / I- -UR *1 1/ / I- -UR *1 1/ * For low friction paste, see page * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

17 REUIG EE UR A UBE (I) rdering ube.. 1 ube. 1 1 Wrench Flat inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / I- -UR / / / UR A rdering ube.. 1 ube. 1 1 Wrench Flat inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -UR / / / I- -UR / / / I- -UR / / / UR A UBE (I) rdering ube.. 1 ube. 2 ube Wrench Flat 1&2 inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -UR / / / / I- -UR / / / / I- -UR / / / UR 2 ASAK PRESSI UBE FIIGS 17 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

18 UI EBW EU UBE (ERI) UBE (ERI) rdering ube.. Wrench Flat mm mm inch mm mm mm mm - -EU / EU / EU / EU / EU / EU / EU / EU / EU / EU / EU / EU / EU / EU-38 * EU-50 * / UBE (I) UBE (I) rdering ube.. Wrench Flat inch mm inch mm inch mm inch mm inch mm inch mm I- -EU-01 1/ / I- -EU-02 1/ / I- -EU-03 3/ / I- -EU-04 1/ / I- -EU-05 5/ / I- -EU-06 3/ / I- -EU-08 1/ / I- -EU-10 5/ / I- -EU-12 3/ / I- -EU-14 7/ / I- -EU / I- -EU-20 *1 1/ / I- -EU-24 *1 1/ I- -EU-32 * / * For low friction paste, see page * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

19 REUIG UI EBW EUR UBE (ERI) UBE (I) rdering ube.. 1 ube. 1 1 Wrench Flat mm inch mm mm mm mm mm in mm mm mm I- -EUR / / I- -EUR / / UBE (I) UBE (I) rdering ube.. 1 ube. 1 1 Wrench Flat in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm I- -EUR / / / I- -EUR / / / ASAK PRESSI UBE FIIGS 19 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

20 FEAE ER (P) F UBE (ERI) FEAE P REA rdering ube.. (P) ex. Flat mm inch mm mm mm mm mm - -F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F / F F / F ont d next page 20 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

21 FEAE ER (P) F UBE (I) FEAE P REA rdering ube.. (P) ex Flat inch mm inch inch mm inch inch mm inch mm inch mm I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / / I- -F / / I- -F / I- -F *1 1/ / / I- -F *1 1/ / / I- -F * / * For low friction paste, see page 81 ASAK PRESSI UBE FIIGS 21 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

22 FEAE ER (BSP) FR UBE (ERI) FEAE IS APERE REA rdering ube.. (IS) ex. Flat mm inch mm mm mm mm mm - -FR R-1/ FR R-1/ FR R-1/ FR R-3/ FR R-1/ FR R-1/ FR R-1/ FR R-3/ FR R-1/ FR R-1/ FR R-1/ FR R-3/ FR R-1/ FR R-1/ FR R-1/ FR R-3/ FR R-1/ FR R-3/ FR R-3/ FR R-1/ FR R-1/ FR R-3/ FR R-3/ FR R FR R-3/ FR R ont d next page Reference Specifications: I BS -21 JIS -B0203 IS -7/1-BSP- esignation: arking R on ex. 22 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

23 FEAE ER (BSP) FR UBE (I) FEAE IS APERE REA rdering ube.. (IS) ex Flat inch mm inch inch mm inch inch mm inch mm inch mm I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-3/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-3/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-3/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-1/ / I- -FR / R-3/ / I- -FR R-3/ / I- -FR R / Reference Specifications: I BS -21 JIS -B0203 IS -7/1-BSP- esignation: arking R on ex. ASAK PRESSI UBE FIIGS 23 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

24 FEAE ER (BSPP) FG UBE (ERI) FEAE IS PARAE REA rdering ube.. (IS) 1 ex. Flat S f in e in mm inch mm mm mm mm mm mm mm mm mm - -FG G-1/ FG G-1/ FG G-1/ FG G-3/ FG G-1/ FG G-1/ FG G-3/ FG G-1/ FG G-1/ FG G-3/ FG G-1/ FG G-1/ FG G-3/ FG G-1/ FG G-1/ FG G-1/ UBE (I) FEAE IS PARAE REA rdering ube.. (IS) 1 ex. Flat S f in e in inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -FG / G-1/ / I- -FG / G-1/ / I- -FG / G-1/ / I- -FG / G-3/ / I- -FG / G-1/ / I- -FG / G-1/ / I- -FG / G-1/ / I- -FG / G-1/ / I- -FG / G-3/ / I- -FG / G-1/ / I- -FG / G-3/ / I- -FG / G-1/ / For Parallel hreads Sealing, see page 81 f Reference Specifications: I -IS 228/1 BS JIS -B0202 IS -228/1-BSP-P 1 esignation: arking G on ex. e S 24 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

25 REUER SPR UBE (ERI) SUB (ERI) rdering ube.. 1 ube.. ex. Flat mm mm mm mm mm mm mm - -SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR SPR ont d next page ASAK PRESSI UBE FIIGS 25 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

26 REUER SPR UBE (ERI) SUB (I) rdering ube.. 1 ube.. ex. Flat mm inch mm mm mm mm mm I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR / I- -SPR I- -SPR EA EXAGER EE; IFRAI UI EE - U REUER - SPR eat exchanger tee made with ASAK tube fittings: ont d next page 26 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

27 REUER SPR UBE (I) SUB (I) rdering ube.. 1 ube.. ex Flat inch mm inch mm inch mm inch inch mm inch mm inch mm I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / / I- -SPR / / I- -SPR / / / I- -SPR / / / I- -SPR / / I- -SPR / / / I- -SPR / / I- -SPR *1 1/ / I- -SPR *1 1/ / I- -SPR / *1 1/ / ASSEBY ISRUIS: Reducer tube to stub SPR *Supplied assembled on tube stub end (A1) nut+front & back ferrule. ighten the nut on the body 1/2 a turn with a wrench. ow friction paste, see page /4 URS ont d next page ASAK PRESSI UBE FIIGS 27 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

28 REUER SPR UBE (I) SUB (ERI) rdering ube.. 1 ube.. ex. Flat inch mm mm inch mm inch inch mm inch mm inch mm I- -SPR / / I- -SPR / / I- -SPR / / I- -SPR / / REUIG PR ER PR ES W ASAK PRS (ERI) rdering ube.. 1 ube.. mm mm mm mm - -PR PR PR PR PR PR PR PR PR * ES W ASAK PRS (I) rdering ube.. 1 ube.. inch mm inch mm inch mm inch mm I- -PR / / I- -PR / / I- -PR / / I- -PR / / I- -PR / / I- -PR / / I- -PR / / I- -PR / / * Including low friction paste, see page 81 ASSEBY ISRUIS Reducer Port onnector PR 1 ighten the nut. 1-1/4 turns of the nut are required for 1/4 (6 mm) and higher. A 3/4 turn of the nut is required for 3/16 (4 mm) and lower. 1/4 UR 28 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

29 PR ER P ES W ASAK PRS (ERI) rdering ube.. mm mm mm - -P P P P P P P P-38 * P-50 * ES W ASAK PRS (I) rdering ube.. inch mm inch mm inch mm I- -P-01 1/ I- -P-02 1/ I- -P-04 1/ I- -P-05 5/ I- -P-06 3/ I- -P-08 1/ I- -P-12 3/ I- -P I- -P-20 *1 1/ I- -P-24 *1 1/ I- -P-32 * * Supplied assembled with uts and Ferrules. ow friction paste, see page 81 Port onnector P ighten the nut. 1-1/4 turns of the nut are required for 1/4 (6 mm) and higher. A 3/4 turn of the nut is required for 3/16 (4 mm) and lower. 1/4 UR ASAK PRESSI UBE FIIGS 29 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

30 AE ER (P) UBE (ERI) AE P REA rdering ube.. (P) ex. Flat mm inch mm mm mm mm mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / *38 1 1/ * inch * Supplied assembled with uts and Ferrules. For low friction paste, see page imension is minimum opening. imensions are for reference only, and are subject to change without notice.

31 AE ER (P) UBE (I) AE P REA rdering ube.. (P) ex. Flat inch mm inch inch mm inch inch mm inch mm inch mm I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / I / / / I / / / I / / / I / / / I / / / I / / American Standard Pipe hread (P). P (ational Pipe apered) is made according to the specifications outlined in ASI B Reference Specifications: 60 hread angle Pitch measured in inches runcation of root and crest is flat aper angle 1 47 hermoelement (see Page 38) ont d next page ASAK PRESSI UBE FIIGS 31 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

32 AE ER (P) UBE (I) AE P REA rdering ube.. (P) ex. Flat inch mm inch inch mm inch inch mm inch mm inch mm I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / I / / / I / / / I / / I / / I / / I / I *1 1/ / I *1 1/ / / I *1 1/ / / I * / * Including low friction paste, See page 91 Reference Specifications: 60 hread angle Pitch measured in inches runcation of root and crest is flat aper angle American Standard Pipe hread (P). P (ational Pipe apered) is made according to the specifications outlined in ASI B hermoelement For ordering: use the catalog number of the selected fitting and add the suffix. Example: I-SS W RER Example: I / - SS Inch or ilimetric ube Ends aterial escription Fitting escription Size Size hrough ole 32 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

33 AE ER (BSP) R UBE (ERI) IS APERE REA rdering ube.. (IS) ex. Flat mm inch mm mm mm mm mm - -R R-1/ R R-1/ R R-1/ R R-1/ R R-1/ R R-1/ R R-1/ R R-3/ R R-1/ R R-1/ R R-1/ R R-3/ R R-1/ R R-1/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-3/ R R-1/ R R-3/ R R-3/ R R R R-1/ R R-3/ R R R *38 R-1 1/ R *50 R inch * Including low friction paste, see page 81 esignation: arking R on ex Reference Specifications: I -IS 2999 BS - 21 JIS - B0203 IS - 7/1-BSP- hermoelement (See Page 38) ont d next page ASAK PRESSI UBE FIIGS 33 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

34 AE ER (BSP) R UBE (I) IS APERE REA rdering ube.. (IS) ex. Flat inch mm inch inch mm inch inch mm inch mm inch mm I- -R / R-1/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R-1/ / I- -R / R-3/ / I- -R / R / I- -R R-3/ / I- -R R / I- -R *1 1/ R-1 1/ / * Including low friction paste, see page 91 Reference Specifications: I -IS 2999 BS - 21 JIS - B0203 IS - 7/1-BSP- esignation: arking R on ex 55 hread angle runcation of root and crest is round aper angle 1 47 hermoelement (see Page 38) 34 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

35 AE ER (BSPP) G UBE (ERI) IS PARAE REA rdering ube.. (P-IS) G ex. Flat R mm inch mm mm mm mm mm mm mm - -G G-1/ G G-1/ G G-1/ G G-1/ G G-1/ G G-1/ G G-3/ G G-1/ G G-1/ G G-1/ G G-3/ G G-1/ G G-1/ G G-3/ G G-1/ G G-1/ G G-3/ G G-1/ G G-3/ G G-3/ G G-1/ G G-3/ G G-1/ G G-3/ G G-3/ G G-1/ G G-3/ G G-1/ G G-3/ G G-1/ G G-3/ G G-3/ G G G G-3/ G G G *38 G-1 1/ * Including low friction paste, see page 81 Reference Specifications: esignation: arking G on ex. G R For Parallel hreads Sealing, see page 70 ont d next page ASAK PRESSI UBE FIIGS 35 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

36 AE ER (BSPP) G UBE (I) IS PARAE REA rdering ube.. (P-IS) G ex. Flat R inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-1/ / I- -G / G-3/ / I- -G / G-3/ mm I- -G / G-1/ / I- -G / G-1/ / I- -G / G-3/ / I- -G G-1/ / I- -G G-3/ / I- -G G / esignation: arking G on ex. Reference Specifications: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P 55 hread angle Pitch measured in inches runcation of root and crest is round iameter measured in inches G R 36 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

37 AE ER (BSPP) K UBE (ERI) IS PARAE REA rdering ube.. (P-IS) G ex. Flat Z mm inch mm mm mm mm mm mm mm - -K G-1/8A K G-1/4A K G-1/8A K G-1/8A K G-1/4A K G-3/8A K G-1/2A K G-1/8A K G-1/4A K G-3/8A K G-1/2A K G-1/4A K G-3/8A K G-1/2A K G-1/4A K G-3/8A K G-1/2A K G-3/4A K G-1/2A K G-3/8A K G-1/2A K G-1/2A K G-3/4A K G-1/2A K G-3/4A K G-3/4A K G-1A K G-3/4A K G-1A K *38 G-1 1/2A * Including low friction paste, see page 81 For Parallel hreads Sealing, see page 70 Reference Specifications: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P G esignation: arking K on ex. Z ont d next page ASAK PRESSI UBE FIIGS 37 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

38 AE ER (BSPP) K UBE (I) IS PARAE REA rdering ube.. Straight hread U G ex. Flat Z inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm I- -K / G-1/8A / I- -K / G-1/4A / I- -K / G-1/8A / I- -K / G-1/4A / I- -K / G-3/8A / I- -K / G-1/2A / I- -K / G-1/2A / I- -K / G-3/4A / I- -K G-1A / G For Parallel threads Sealing, See page 76 esignation: arking K on ex. Reference Specifications: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P Z AE ER S SAE/S SRAIG REA BSS*** rdering ube.. Straight hread U ex. Flat Z -Ring** mm inch mm mm mm mm mm mm - -S (24) 3 5/ / S (18) 3 9/ S (20) 6 1/ S (18) 6 9/ S (14) 6 7/ S (20) 8 1/ S (18) 8 9/ S (18) 10 9/ S (16) 10 3/ S (20) 12 7/ S (18) 12 9/ S (16) 12 3/ S (18) 16 9/ S (12) / esignation: arking S on ex. *** Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. Z ont d next page 38 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

39 AE ER S SAE/S SRAIG REA BSS*** rdering ube.. Straight hread U ex. Flat Z -RIG** inch mm inch inch mm inch inch mm inch mm inch mm inch mm I- -S (24) 1/ / / I- -S (20) 1/ / / I- -S (18) 1/ / / I- -S (24) 1/ / / I- -S (20) 1/ / / I- -S (18) 1/ / / I- -S (16) 1/ / / I- -S (14) 1/ / I- -S (20) 5/ / / I- -S (20) 3/ / / I- -S (18) 3/ / / I- -S (16) 3/ / / I- -S (14) 3/ / I- -S (18) 1/ / / I- -S (16) 1/ / / I- -S (14) 1/ / I- -S (12) 1/ / / I- -S (16) 5/ / / I- -S (14) 5/ / I- -S (16) 3/ / / I- -S (12) 3/ / / I- -S (12) 3/ / / I- -S (12) 7/ / / I- -S (12) / / I- -S (12) / / I- -S (12) *1 1/ / / I- -S (12) *1 1/ / / I- -S (12) * / / esignation: arking S on ex. *** Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. * Including low friction paste, see page 81 Z ASAK PRESSI UBE FIIGS 39 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

40 AE ER P -SEA P APERE REA rdering ube.. (P) Short ex. Flat G ex. Flat Z -RIG** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / esignation: arking P on ex. ** -rings used are BUA 70 urometer. G Z AE ER -SEA AE U REA rdering ube.. Straight hread U G ex. Flat Z -RIG** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm I (24) 1/ / / I (24) 1/ / / I (24) 3/ / / I (20) 1/ / / I (20) 5/ / / I (18) 3/ / / I (16) 1/ / / I (12) 3/ / / I (12) / / esignation: arking on ex. ** -rings used are BUA 70 urometer. G Z 40 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

41 AE PIPE WE ER UBE (ERI) rdering ube.. P Pipe Size ex. Flat Z mm inch mm mm mm mm mm mm mm / / / / / / / / / / / / / / / / / / *38 1 1/ esignation: arking on ex. * Including low friction paste, see page 81 P Z ont d next page ASAK PRESSI UBE FIIGS 41 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

42 AE PIPE WE ER UBE (I) rdering ube.. P Pipe Size ex. Flat Z inch mm inch mm inch mm inch inch mm inch mm inch mm inch mm I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / / I / / I / / / I / / / I / / / I / I *1 1/ / / I *1 1/ / / I * / esignation: arking on ex. P Z UBE SKE WE UI W UBE (I) rdering ube.. E ex. Flat P Z inch mm inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm I- -W / / I- -W / / I- -W / / I- -W / / I- -W / / I- -W / esignation: arking W on ex. E P Z 42 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

43 AE EBW (P) E UBE (ERI) AE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / / E / E / / E / E *38 1 1/ * Including low friction paste, see page 81 ont d next page ASAK PRESSI UBE FIIGS 43 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

AE EBW (P) E (ont d) UBE (I) AE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -E-01-01 1/16 1.58 1/16.05 1.27 7/16 11.1.60 15.24.75 19.05.70 17.

44 AE EBW (P) E (ont d) UBE (I) AE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / I- -E / I- -E *1 1/ / / I- -E *1 1/ / I- -E * / * Including low friction paste, see page imension is minimum opening. imensions are for reference only, and are subject to change without notice.

45 AE EBW (BSP) ER UBE (ERI) IS APERE REA rdering ube.. (IS) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -ER R-1/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-1/ / ER R-3/ / ER R-1/ / ER R-3/ / ER R-3/ / ER R / ER R-3/ / ER R / Reference Specifications: I BS - 21 JIS - B0203 IS - 7/1-BSP- esignation: arking R on Flat ont d next page ASAK PRESSI UBE FIIGS 45 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

46 AE EBW (BSP) ER UBE (I) IS APERE REA rdering ube.. (IS) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-3/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER / R-3/ / I- -ER / R-1/ / I- -ER / R-3/ / I- -ER / R-1/ / I- -ER / R-1/ / I- -ER R / Reference Specifications: I BS - 21 JIS - B0203 IS - 7/1-BSP- esignation: arking R on Flat AE PIPE WE EBW E UBE (I) rdering ube.. P Pipe Size Wrench Flat Z 1 inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -E / / / I- -E / / / I- -E / / / I- -E / / / I- -E / / / esignation: arking on Flat Z 1 P 46 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

47 UBE SKE WE EBW EW UBE (I) rdering ube.. P ube.. Wrench Flat Z 1 inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -EW / / / I- -EW / / / I- -EW / / / I- -EW / / / I- -EW / esignation: arking W on Flat 1 Z P REUIG EBW EPR UBE (ERI) SUB (ERI) rdering ube.. 1 ube.. Wrench Flat 1 mm mm mm inch mm mm mm mm mm - -EPR / EPR / EPR / EPR / UBE (I) SUB (I) rdering ube.. 1 ube.. Wrench Flat 1 inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -EPR / / / I- -EPR / / / ASAK PRESSI UBE FIIGS 47 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

48 FEAE EBW EF UBE (ERI) FEAE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -EF / / EF / / EF / / EF / / EF / / EF / / EF / / EF / / EF / / UBE (I) FEAE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / / I- -EF / / I- -EF / W imension is minimum opening. imensions are for reference only, and are subject to change without notice.

AE RU EE R UBE (ERI) AE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -R-06-02 6 1/8 4.8 1/2 12.7 19.6 27.0 18.8 15.3 - -R-06-04 6 1/4 4.8 1/2 12.7 19.6 27.0 23.4 15.

49 AE RU EE R UBE (ERI) AE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -R / / R / / R / / x R / / R / / R / / R / / R / / R / / UBE (I) AE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / I- -R / / / ASAK PRESSI UBE FIIGS 49 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

FEAE RU EE FR UBE (ERI) FEAE P REA rdering (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -FR-06-02 6 1/8 4.8 5/8 15.9 19.6 27.0 19.0 15.3 - -FR-06-04 6 1/4 4.8 13/16 20.6 22.4 29.8 22.4 15.

50 FEAE RU EE FR UBE (ERI) FEAE P REA rdering (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -FR / / FR / / FR / / FR / / FR / / FR / / FR / / FR / / FR / / UBE (I) FEAE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -FR / / / I- -FR / / / I- -FR / / / I- -FR / / / I- -FR / / / I- -FR / / / I- -FR / / / I- -FR / / I- -FR / * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

AE BRA EE B UBE (ERI) AE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -B-06-02 6 1/8 4.8 1/2 12.7 19.6 27.0 18.8 15.3 - -B-06-04 6 1/4 4.8 1/2 12.7 19.6 27.0 23.4 15.

0 28.2 22.8 - -B-12-06 12 3/8 9.5 13/16 20.6 25.9 36.0 28.2 22.8 - -B-12-08 12 1/2 9.5 13/16 20.6 25.9 36.0 33.0 22.8 - -B-16-08 16 1/2 11.9 15/16 23.8 28.7 38.8 35.8 24.

51 AE BRA EE B UBE (ERI) AE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -B / / B / / B / / B / / B / / B / / B / / B / / B / / UBE (I) AE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / I- -B / / / ASAK PRESSI UBE FIIGS 51 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

FEAE BRA EE FB UBE (ERI) FEAE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -FB-06-02 6 1/8 4.8 5/8 15.9 19.6 27.0 19.0 15.3 - -FB-06-04 6 1/4 4.8 13/16 20.6 22.4 29.8 22.

52 FEAE BRA EE FB UBE (ERI) FEAE P REA rdering ube.. (P) Wrench Flat 1 mm inch mm inch mm mm mm mm mm - -FB / / FB / / FB / / FB / / FB / / FB / / FB / / FB / / FB / / FB / / UBE (I) FEAE P REA rdering ube.. (P) Wrench Flat 1 inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / / I- -FB / / I- -FB / imension is minimum opening. imensions are for reference only, and are subject to change without notice.

53 BUKEA UI BU UBE (ERI) UBE (ERI) rdering ube.. ex. Flat 1 1 Panel ole rill Size Panel ole rill Size mm mm mm mm mm mm mm mm mm mm - -BU BU BU BU BU BU BU BU BU BU BU BU BU-38 * UBE (I) UBE (I) rdering ube.. ex. Flat 1 1 Panel ole rill Size Panel ole rill Size inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -BU-01 1/ / / I- -BU-02 1/ / / I- -BU-03 3/ / / I- -BU-04 1/ / / I- -BU-05 5/ / / I- -BU-06 3/ / / I- -BU-08 1/ / / I- -BU-10 5/ / / I- -BU-12 3/ / / I- -BU / / I- -BU-20 *1 1/ / / I- -BU-24 *1 1/ / / I- -BU-32 * / / * Including low friction paste, see page ASAK PRESSI UBE FIIGS 53 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

54 BUKEA FEAE ER FB UBE (ERI) FEAE P REA rdering ube.. (P) ex. Flat 1 ex. Flat 1 1 Panel ole rill Size Panel ole rill Size mm inch mm mm mm mm mm mm mm mm mm mm - -FB / FB / UBE (I) FEAE P REA rdering ube.. (P) ex. Flat 1 ex. Flat 1 1 Panel ole rill Size Panel ole rill Size inch mm inch inch mm inch inch inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -FB / / /16 1/ / I- -FB / / /8 5/ / I- -FB / / /4 5/ / I- -FB / / /4 3/ / I- -FB / / /16 15/ / I- -FB / / /16 15/ / BUKEA REUER RB UBE (I) UBE (I) rdering ube.. 1 ube.. ex. Flat Panel hole drill size ax. Panel thickness inch mm inch inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -RB / / / / I- -RB / / / / I- -RB / / / / I- -RB / / / / I- -RB / / / / I- -RB / / / / I- -RB / / imension is minimum opening. imensions are for reference only, and are subject to change without notice.

55 BUKEA AE ER B UBE (ERI) AE P REA rdering ube.. (P) ex. Flat 1 ex. Flat 1 1 Panel ole rill Size ax. Panel hickness mm inch mm mm mm mm mm mm mm mm mm - -B / B / B / UBE (I) AE P REA rdering ube.. (P) ex. Flat 1 ex. Flat 1 1 Panel ole rill Size ax. Panel hickness inch mm inch inch mm inch inch inch mm inch mm inch mm inch mm inch mm inch mm I- -B / / /2 1/ / I- -B / / /8 5/ / I- -B / / /8 5/ / I- -B / / /4 3/ / I- -B / / /4 3/ / I- -B / / /8 3/ / I- -B / / /16 15/ / I- -B / / /16 15/ / I- -B / / /16 1 3/ / I- -B /8 1 5/ / ASAK PRESSI UBE FIIGS 55 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

56 BUKEA REUIG UI RUB UBE (ERI) UBE (I) rdering ube.. 1 ube.. ex. Flat Panel ole rill Size ax. Panel hickness mm inch mm mm mm mm mm mm mm mm mm mm - -RUB / RUB / RUB / RUB / UBE (I) UBE (I) rdering ube.. 1 ube.. ex. Flat Panel ole rill Size ax. Panel hickness inch mm inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -RUB / / / / I- -RUB / / / / I- -RUB / / / / I- -RUB / / / I- -RUB / / / / I- -RUB / / / / I- -RUB / / / / I- -RUB / / / / imension is minimum opening. imensions are for reference only, and are subject to change without notice.

UI RSS R A UBES (ERI) rdering ube.. Wrench Flat R mm mm inch mm mm mm mm mm mm - -R-03 3 2.4 3/8 9.5 15.7 22.3 31.5 44.7 12.9 - -R-06 6 4.8 1/2 12.7 19.6 27.0 39.1 53.9 15.3 - -R-08 8 6.4 5/8 15.9 22.

57 UI RSS R A UBES (ERI) rdering ube.. Wrench Flat R mm mm inch mm mm mm mm mm mm - -R / R / R / R / R / R / R / R / R / R / A UBES (I) rdering ube.. Wrench Flat R inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -R-02 1/ / I- -R-04 1/ / I- -R-05 5/ / I- -R-06 3/ / I- -R-08 1/ / I- -R-12 3/ / I- -R / R ASAK PRESSI UBE FIIGS 57 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

58 AP APPIG E F UBE (ERI) rdering ube.. ex. Flat mm mm mm mm mm * APPIG E F UBE (I) rdering ube.. ex. Flat inch mm inch inch mm inch mm inch mm I / / I / / I / / I / / I / / I / / I / / I / / I / / I / / I / I *1 1/ / I *1 1/ / I * / * Including low friction paste, see page imension is minimum opening. imensions are for reference only, and are subject to change without notice.

59 PUG P PUGGIG UUSE PR F FIIG (ERI) rdering ex. Flat mm mm - -P P P P P P P P P P P P P P P-38 * P-50 *50 3 inch PUGGIG UUSE PR F FIIG (I) rdering ex. Flat inch mm inch I- -P-01 1/ /16 I- -P-02 1/ /16 I- -P-03 3/ /2 I- -P-04 1/ /16 I- -P-05 5/ /8 I- -P-06 3/ /16 I- -P-08 1/ /8 I- -P-10 5/ I- -P-12 3/ /8 I- -P-14 7/ /4 I- -P /2 I- -P-20 *1 1/ /8 I- -P-24 *1 1/ /4 I- -P-32 * PUG ASSEBY ISRUIS 1/4 UR (90 ) Y PUG * Including low friction paste, see page 81 ASAK PRESSI UBE FIIGS 59 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

60 FEAE AAPER UBE PIPE PF UBE (ERI) FEAE PIPE rdering ube.. (P) ex. Flat mm inch mm mm mm mm - -PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / PF / ont d next page 60 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

61 FEAE AAPER UBE PIPE PF UBE (I) FEAE PIPE rdering ube.. (P) ex. Flat inch mm inch inch mm inch inch mm inch mm I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / / I- - PF / / I- - PF / / I- - PF / I- - PF * 1 1/ / / I- - PF * 1 1/ / / * Supplied assembled with ut and Ferrules. Including low friction paste, see page 81 ASAK PRESSI UBE FIIGS 61 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

62 AE AAPER UBE PIPE (P) P UBE (ERI) AE PIPE rdering ube.. (P) ex. Flat mm inch mm mm mm mm - -P / P / P / P / P / P / P / P / P / /16 inch P / P / /16 inch P / P / P / P / P / P / P / ont d next page 62 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

63 AE AAPER UBE PIPE (P) P UBE (I) AE PIPE rdering ube.. (P) ex. Flat inch mm inch inch mm inch inch mm inch mm I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / / I- -P / / I- -P / / / I- -P / / I- -P / I- -P * 1 1/ / / I- -P * 1 1/ / / * Supplied assembled with ut and Ferrules. Including low friction paste, see page 81 ASAK PRESSI UBE FIIGS 63 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

AE AAPER UBE PIPE (BSP) PR UBE (ERI) AE PIPE rdering ube.. (IS) ex. Flat mm inch mm mm mm mm - -PR-06-02 6 R-1/8 4.0 12 15.7 32.8 - -PR-06-04 6 R-1/4 4.0 14 15.7 38.1 - -PR-06-08 6 R-1/2 4.0 22 15.

64 AE AAPER UBE PIPE (BSP) PR UBE (ERI) AE PIPE rdering ube.. (IS) ex. Flat mm inch mm mm mm mm - -PR R-1/ PR R-1/ PR R-1/ PR R-1/ PR R-1/ PR R-3/ /16 inch PR R-1/ PR R-3/ PR R-1/ PR R-1/ PR R-3/ PR R-1/ PR R-3/ UBE (I) AE PIPE rdering ube.. (IS) ex. Flat inch mm inch inch mm inch inch mm inch mm I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-3/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-3/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-3/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-1/ / I- -PR / R-3/ / I- -PR R / Reference Specifications: I -IS 2999 BS - 21 JIS - B0203 IS - 7/1-BSP- esignation: arking R on ex 55 hread angle runcation of root and crest is round aper angle imension is minimum opening. imensions are for reference only, and are subject to change without notice.

65 AE AAPER UBE PIPE (BSPP) PG UBE (ERI) IS PARAE REA rdering ube.. (IS) G ex. Flat R mm inch mm mm mm mm mm mm - -PG G-1/ / PG G-1/ PG G-1/ PG G-1/ PG G-3/ PG G-1/ PG G-1/ PG G-3/ PG G-1/ PG G-1/ PG G-3/ PG G-1 1/ UBE (I) IS PARAE REA rdering ube.. (IS) G ex. Flat R inch mm inch inch mm inch mm inch inch mm inch mm inch mm I- -PG / G-1/ / I- -PG / G-1/ / I- -PG / G-1/ / I- -PG / G-1/ / I- -PG / G-1/ / I- -PG / G-3/ / I- -PG / G-1/ / I- -PG / G-3/ / I- -PG / G-1/ / I- -PG / G-3/ / I- -PG G / For Parallel hreads Sealing, see page 70 (P-IS) G R ASAK PRESSI UBE FIIGS 65 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

WE AAPER UBE PIPE P UBE (I) rdering ube.. P Pipe Size inch mm inch mm inch mm inch mm I- -P-04-04 1/4 6.35 1/4 13.70.17 4.20 1.14 28.96 I- -P-06-08 3/8 9.52 1/2 21.34.27 6.85 1.46 37.

66 WE AAPER UBE PIPE P UBE (I) rdering ube.. P Pipe Size inch mm inch mm inch mm inch mm I- -P / / I- -P / / I- -P / / I- -P / / I- -P / / P SKE WE AAPER PW UBE (ERI) UBE (I) rdering ube.. 1 Pipe Size E P Z mm inch mm mm inch mm mm mm - -PW / / PW / / PW / / UBE (I) UBE (I) rdering ube.. 1 Pipe Size E P Z inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm I- -PW / / / I- -PW / / / I- -PW / / / Z P 1 E 66 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

AE AAPER (SAE) PSAE UBE (I) SAE/S SRAIG REA BSS*** rdering ube.. Straight hread U Z -Ring** inch mm inch inch mm inch mm inch mm inch mm I- -PSAE-02-05 (24) 1/8 3.18 5/16-24.08 2.03 7/16 11.1.30 7.

67 AE AAPER (SAE) PSAE UBE (I) SAE/S SRAIG REA BSS*** rdering ube.. Straight hread U Z -Ring** inch mm inch inch mm inch mm inch mm inch mm I- -PSAE (24) 1/ / / I- -PSAE (20) 1/ / / I- -PSAE (18) 1/ / / I- -PSAE (20) 3/ / / I- -PSAE (18) 3/ / / I- -PSAE (16) 3/ / / I- -PSAE (18) 1/ / / I- -PSAE (16) 1/ / / I- -PSAE (14) 5/ / I- -PSAE (12) 3/ / / I- -PSAE (12) / / I- -PSAE (12) * 1 1/ / / I- -PSAE (12) *1 1/ / / esignation: arking S on ex. *** Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. * Supplied assembled with ut + Front and Back Ferrule. Including low friction paste, see page 91. Z ASAK PRESSI UBE FIIGS 67 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

68 ASAK A AAPER SAF rdering ube.. * ube Flare Size ex. Flat 1 S inch mm inch mm inch inch mm inch mm inch mm I- -SAF / / / I- -SAF / / / I- -SAF / / / I- -SAF / / / I- -SAF / / / * 74 S ASAK A UI UA UBE (I) UBE (I) rdering ube.. * ube Flare size ex. Flat S Straight hread inch mm inch mm inch mm inch inch mm inch mm inch mm I- -UA / / / /16-24 I- -UA / / / /16-24 I- -UA / / / /16-20 I- -UA / / / /16-20 I- -UA / / / /16-20 I- -UA / / / /16-18 I- -UA / / / /4-16 I- -UA / / / /16-12 I- -UA / /16-12 S * 68 * For low friction paste, see page 91 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

69 ASAK A BUKEA UI UBA UBE (I) UBE (I) rdering ube.. * ube Flare size ex. Flat S S1 1 Straight hread Panel hole drill size ax. panel thickness inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch mm inch inch mm inch mm inch mm I- -UBA / / / / / I- -UBA / / / / / I- -UBA / / / / / I- -UBA / / / / / I- -UBA / / / * Flare 37 per SAE J AE AAPER UBE A PA * * S1 S UBE (I) UBE (I) rdering ube.. * hread Flare Size Straight hread inch mm inch mm inch mm inch mm inch mm I- -PA / / / /16-20 I- -PA / / / /16-20 I- -PA / / / /16-18 I- -PA / / / /4-16 I- -PA / / / /8-14 I- -PA / / / /16-12 I- -PA / /16-12 * Flare 37 per SAE J514. ASAK PRESSI UBE FIIGS 69 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

PARAE REAS SEAIG PS Sealing the parallel thread as 228/1 is done on the shoulder, metal on metal or with the gasket (See tabels below) SEAIG WASER FR G E BE SRAIESS SEE / ARB SEE WASER Gasket rdering

03 I-SS-PS-08-* I-S-PS-1/2 1/2 28.58 2.49 I-SS-PS-12-* I-S-PS-3/4 3/4 34.93 2.49 I-SS-PS-16-* I-S-PS-1 1 42.80 2.

70 PARAE REAS SEAIG PS Sealing the parallel thread as 228/1 is done on the shoulder, metal on metal or with the gasket (See tabels below) SEAIG WASER FR G E BE SRAIESS SEE / ARB SEE WASER Gasket rdering information IS hread Stainless Steel 316 arbon Steel Size I-SS-PS-02-* I-S-PS-02 1/ I-SS-PS-04-* I-S-PS-1/4 1/ I-SS-PS-06-* I-S-PS-3/8 3/ I-SS-PS-08-* I-S-PS-1/2 1/ I-SS-PS-12-* I-S-PS-3/4 3/ I-SS-PS-16-* I-S-PS RERIG IFRAI FR FERRUE SES Example: I SS PS 02 Inch aterial description SS Stainless Steel S arbon steel opper Gasket Size * Internal ring material V Internal ring material V FK B Buna Reference Specifications: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P PPER SEA GASKE K* AE E Gasket rdering information IS hread Size mm inch mm inch mm inch PPER SEA GASKE K 1/8 1/ PPER SEA GASKE K 1/4 1/ PPER SEA GASKE K 3/8 3/ PPER SEA GASKE K 1/2 1/ PPER SEA GASKE K 3/4 3/ PPER SEA GASKE K * ote: an be used on G ends PPER SEA GASKE G FEAE E Gasket rdering information IS hread Size mm inch mm inch mm inch I--PSI-02 1/ I--PSI-06 3/ I--PSI-08 1/ RERIG IFRAI FR FERRUE SES Example: I PSE 04 Inch aterial description opper Gasket escription Size 70 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

71 PSIIABES PER SAE J1926 A S AE EBW ESAE-PS UBE SAE/S SRAIG REA BSS (PSIIABE)* rdering ube.. SAE/S a Wrench Flat ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. I-SS-ESAE-PS-04-07(20) I-SS-ESAE-PS-04-09(18) I-SS-ESAE-PS-06-07(20) I-SS-ESAE-PS-06-09(18) I-SS-ESAE-PS-06-12(16) I-SS-ESAE-PS-08-09(18) I-SS-ESAE-PS-08-12(16) 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / I-SS-ESAE-PS-12-17(12) I-SS-ESAE-PS-16-17(12) I-SS-ESAE-PS-16-21(12) 3/ / / / / / / / / / a -ring R AE EBW 45 EASAE-PS 45 UBE SAE/S SRAIG REA BSS (PSIIABE)* rdering ube.. SAE/S Wrench Flat a ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. I-SS-EASAE-PS- 04 (20) I-SS-EASAE-PS (18) 1/ / / / / / / / a 1 * Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. -ring ASAK PRESSI UBE FIIGS 71 R - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

72 PSIIABES PER SAE J1926 A S AE RU EE RS-PS UBE SAE/S SRAIG REA BSS (PSIIABE)* rdering I-SS-RS- PS-04-07(20) ube.. SAE/S a Wrench Flat ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. 1/ / / / I-SS-RS- PS-06-09(18) 3/ / / / * Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. R a -ring I AE BRA EE BS-PS UBE SAE/S SRAIG REA BSS (PSIIABE)* rdering I-SS-BS- PS (20) ube.. SAE/S a Wrench Flat ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. 1/ / / / I-SS-BS- PS (18) 3/ / / / * Per SAE J1926 and S See page 80 for mounting dimensions. ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. a -ring R 72 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

73 IESIS ARIG J1926 & S BSS UIG IESIS FR -SEA ERS (SAE/S) UBE.. I z hread Size in iameter in iameter in ±0.05 ±0.20 in ax in Full ±1 ±0.05 hread inch mm inch mm mm mm mm mm mm mm mm 1/ /16-24 UF - 2B / /8-24 UF - 2B / /16-20 UF - 2B / /2-20 UF - 2B / /16-18 UF- 2B / /4-16 UF -2B / /8-14 UF - 2B / /16-12 UF - 2B / /16-12 U - 2B /16-12 U - 2B / /8-12 U - 2B / /8-12 U - 2B /2-12 U - 2B ISAAI ISRUIS Figure 1 Figure 2 Figure 3 Figure 4 ocking backed off Fitting install hand tight Fittings backed-off for alignment (1 turn maximum) Fitting locknut tightly to appropriate torque ubricate the -ring by inserting it into the groove adjacent to the face of the metal back-up washer which is assembled at the extreme end of the groove as shown in Figure 1. Install the fitting into the S.A.E. straight thread boss, figure 2, until the metal back-up washer contacts the face of the boss as shown in Figure 2. Position the fitting by turning it counter clockwise up to a maximum of one turn (see Figure 3). olding the pad of the fitting with a spanner, tighten the locknut and washer against the face as shown in Figure 4. imensions are for reference only, and are subject to change without notice. ASAK PRESSI UBE FIIGS 73 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

74 PSIIABES IS PARAE REA AE EBW EG-PS UBE (ERI) IS PARAE REA (PSIIABE)* rdering ube.. (IS) Wrench Flat a ex. Flat 1 R -ring** mm inch mm inch mm inch mm mm mm mm mm mm ash o. -SS-EG- PS (28) -SS-EG- PS (19) -SS-EG- PS (28) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (14) 6 G-1/ / / *** 6 G-1/ / / G-1/ / / *** 8 G-1/ / / G-1/ / / G-3/ / / G-1/ / / G-3/ / / G-1/ / / UBE (I) IS PARAE REA (PSIIABE)* rdering ube.. (IS) Wrench Flat a ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. -SS-EG- PS (28) -SS-EG- PS (19) -SS-EG- PS (14) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (19) -SS-EG- PS (14) -SS-EG- PS (14) 1/ G-1/ / / *** 1/ G-1/ / / / G-1/ / / / G-1/ / / / G-3/ / / / G-1/ / / / G-3/ / / / G-1/ / / / G-1/ / / * Per: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. *** ot standard -ring size. 1 a -ring R 74 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

75 PSIIABES IS PARAE REA AE EBW 45 EAG-PS 45 UBE (ERI) IS PARAE REA (PSIIABE)* rdering -SS-EAG- PS (28) UBE (I) IS PARAE REA (PSIIABE)* rdering I-SS-EAG- PS (28) ube.. ube.. (IS) (IS) Wrench Flat Wrench Flat a ex. Flat a ex. Flat 1 R -ring** mm inch mm inch mm inch mm mm mm mm mm mm ash o. 6 G-1/ / / *** 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. 1/ G-1/ / / *** a 1 -ring R AE RU EE RG-PS UBE (ERI) IS PARAE REA (PSIIABE)* rdering -SS-RG-PS (28) -SS-RG-PS (19) -SS-RG-PS (19) -SS-RG-PS (19) UBE (I) IS PARAE REA (PSIIABE)* rdering I-SS-RG-PS (28) I-SS-RG-PS (19) I-SS-RG-PS (19) ube.. ube.. (IS) (IS) Wrench Flat Wrench Flat a ex. Flat a ex. Flat 1 R -ring** mm inch mm inch mm inch mm mm mm mm mm mm ash o. 6 G-1/ / / *** 6 G-1/ / / G-1/ / / G-1/ / / R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. 1/ G-1/ / / *** 1/ G-1/ / / / G- 1/ / / * Per: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P a R -ring ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. *** ot standard -ring size. ASAK PRESSI UBE FIIGS 75 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

76 PSIIABES IS PARAE REA AE BRA EE BG-PS UBE (ERI) IS PARAE REA (PSIIABE)* rdering -SS-BG- PS (28) -SS-BG- PS (19) -SS-BG- PS (19) -SS-BG- PS (19) ube.. (IS) Wrench Flat a ex. Flat 1 R -ring** mm inch mm inch mm inch mm mm mm mm mm mm ash o. 6 G-1/ / / *** 6 G-1/ / / G-1/ / / G-1/ / / UBE (I) IS PARAE REA (PSIIABE)* rdering I-SS-BG- PS (28) I-SS-BG- PS (19) I-SS-BG- PS (19) ube.. (IS) Wrench Flat a ex. Flat 1 R -ring** inch mm inch inch mm inch mm inch inch mm inch mm inch mm inch mm inch mm inch mm ash o. 1/ G-1/ / / *** 1/ G-1/ / / / G-1/ / / * Per: I - IS 228/1 BS JIS - B0202 IS - 228/1-BSP-P ** -rings used are Fluorocarbon FK 90 urometer. ther -ring materials are available on request. *** ot standard -ring size. a 1 -ring R 76 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

77 IS PARAE REA PER IS 228 UIG IESIS ERS Female A hread inor iameter B in achined and Flat Area in Uselful hread max min inch mm inch mm inch mm inch mm G-1/ G-1/ G-3/ G-1/ ISAAI ISRUIS Figure 1 Figure 2 Figure 3 Figure 4 ocking backed off Fitting install hand tight Fittings backed-off for alignment (1 turn maximum) Fitting locknut tightly to appropriate torque ubricate the -ring by inserting it in the groove adjacent to the face of the metal back-up washer, which is assembled at the extreme end of the groove as shown in Figure 1. Install the fitting into the S.A.E. straight thread boss, Figure 2, untill the metal back-up washer contacts the face of the boss as shown in Figure 2. Position the fitting by turning counter clockwise up to maximum of one turn. See Figure 3. olding the pad of the fitting with a wrench, tighten the locknut and washer against the face as shown in Figure 4. ASAK PRESSI UBE FIIGS 77 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

UI IEERI SU-IA ielectric fittings are designed to insulate subsystems from electrical current, voltages and static charges. UBE (ERI) UBE (ERI) rdering ube.. ex. Flat a ex.

Flat R inch mm inch mm inch inch inch mm inch mm inch mm inch mm I- -SU-IA-02 1/8 3.17.09 2.28 13/16 1/2 2.56 65.10.50 12.7 3.07 77.94 3.59 9.11 I- -SU-IA-04 1/4 6.35.19 4.80 13/16 1/2 2.57 65.30.

78 UI IEERI SU-IA ielectric fittings are designed to insulate subsystems from electrical current, voltages and static charges. UBE (ERI) UBE (ERI) rdering ube.. ex. Flat a ex. Flat R mm mm mm mm mm mm mm mm - -SU-IA SU-IA UBE (I) UBE (I) rdering ube.. ex. Flat a ex. Flat R inch mm inch mm inch inch inch mm inch mm inch mm inch mm I- -SU-IA-02 1/ /16 1/ I- -SU-IA-04 1/ /16 1/ I- -SU-IA-06 3/ /16 5/ I- -SU-IA-08 1/ /16 13/ Insulators a -Ring Insulation Joint Ring Insulation ut AERIA F SRUI 1. Body: A.I.S.I Insulators: Polyamide-Imide. 3. -Ring: Fluorocarbon FK 70 urometer. 4. Ring: PFE. WRKIG IIS: 1. Pressure rating: 5000 psi 2. emperature rating: -40 c to 93 c (-40 F to 200 F). 3. Electrical resistance at 20 c-25 c (68 F-77 F): 10X10 6 Ω at 30V. UBE (I) AE P REA rdering ube.. (P) ex. Flat a ex. Flat inch mm inch inch mm inch inch inch mm inch mm inch mm I-- ---IA / / /8 5/ imension is minimum opening. imensions are for reference only, and are subject to change without notice.

79 Assembly Instructions for ielectric Fittings ut A 1. old ex A (Back-Up) and tighten nut A according to the ASAK assembly instructions (see the ASAK catalog for more information). 2. old ex B (Back-Up) and tighten nut B according to the ASAK assembly instructions. AUI: SE the ISUAI U and USE I as a BAK UP EX. otes: 1. If the end connection is a aper Pipe hread - apply pipe sealant on thread and use ex A or B as wrenching or as the Backup ex. 2. For additional types of end connection, please contact your authorized ASAVA representative. ut B Back Up EX A Back Up EX B SE the ISUAI U and USE I as a BAKUP EX. Warning! he system designer and user have the sole responsibility to select products suitable for their special application requirements and to ensure the proper installation, operation and maintenance of the product. Please consider application details, material compatibility and product ratings when making your selection. Improper selection or use of products can cause property damage or personal injury. ASAK PRESSI UBE FIIGS 79 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

he available ASAK pre-assembly tools are as follows: PAR.

80 SRAIE SPAE ISAAIS When area conditions dictate installation in a constrained manoeuvring space a pre-assembly tool is available. he ASAK pre-assembly tool enables initial installation step under convenient conditions and then a final installation step on the system itself. he available ASAK pre-assembly tools are as follows: PAR. ASAK SIZE ASSEBY 1/ ASSEBY 1/ ASSEBY 3/ ASSEBY 1/ ASSEBY 5/ ASSEBY ASSEBY ASSEBY ASSEBY ASSEBY ASSEBY ASSEBY 16 perating instruction for 1/4 1 ; 6mm 25mm Pre-assembly tool 1. First, the ASAK ferrules and nut should be assembled on the pre-assembly tool and then the nut is tightened to finger tight position. 2. ube insertion; the tube should be inserted through the nut and ferrules until the tube touches the bottom (shoulder). 3. urn the nut 1¼ turns from the finger tight position (450 ). 4. At this stage, release the nut from the pre-assembly tool; Pull out the tube with the ferrules swaged into the tube. 5. he tube with the swaged ferrules should now inserted into the fitting body. 6. ighten the nut just to the finger tight position and mark the position. 7. For assembling on the fitting, use appropriate wrench: ighten the nut to its original position. Be aware to start of torque increase; when increase of torque is felt proceed turning the wrench very slightly. Always keep in mind that tightening to the original position is depends on tube size: A large size tube requires more tightening than a small size tube. ube wall thickness has some effects on tightening operation as well perating instruction for 1/8 3/16 ; 2mm 4mm Pre-assembly tool he operating instructions are the same as for 1/4 1 : 6mm 25mm pre-assembly tool specified above with one exception: n step 3 urn the nut ¾ turn from the finger tight position (270 ). ote: 1. Prior to using the pre-assembly tool make sure that it is clean and completely undamaged. 2. he pre-assembly tool is sensitive to wear; therefore the usage of the pre-assembly tool is limited. After a permanent use send the pre-assembly tool to ASAK for condition evaluation.until the tube gets released from the tool. 3. Soft tube or a tube at the maximum diameter tolerance might stick to the pre-assembly tool. If both are stuck together shake tube back and forth until it is released from the pre-assembly tool imension is minimum opening. imensions are for reference only, and are subject to change without notice.

GAUGE AR ASK Assembly Instructions - Gauge ollar inch inch mm 1/4.69 17.5 3/8.84 20.6 1/2 1.10 27.0 3/4 1.31 33.3 1 1.68 42.7 1. Remove the nut and ferrules from the fitting. 2. Insert the stop collar.

At this stage it is guaranteed that the fitting is assembeled correctly.

-276 S Alloy 2507 W RER SP GAUGE Y GAUGE AR 1/4 Gauge ollar ube.. he.

81 GAUGE AR ASK Assembly Instructions - Gauge ollar inch inch mm 1/ / / / Remove the nut and ferrules from the fitting. 2. Insert the stop collar. 3. Assemble the nut and ferrules until finger tight. 4. ake up the fitting until the gauge collar no longer rotates (feel with finger). At this stage it is guaranteed that the fitting is assembeled correctly. RERIG IFRAI FR ASSEBE GAUGE AR (WI FIIG) I/ SS SUR G Inch or ilimetric aterial escription Fitting escription SIZE SIZE Gauge ollar SS Stainless Steel 316 B Brass Alloy 400 Alloy -276 S Alloy 2507 W RER SP GAUGE Y GAUGE AR 1/4 Gauge ollar ube.. he.. size is always the first to be described W FRII PASE - G-RAPI PUS* A B ISAAI ISRUIS FR ASAK FIIGS 38mm-50mm 1 1 / lose the nut and ferrules on the tube with a hydraulic tool. 2. pen and release from the tool. 3. Apply the G-Rapid paste on areas A and B. 4. ighten the nut on body 1/2 a turn with a wrench G-RAPI PUS ASAK PRESSI UBE FIIGS 81 - imension is minimum opening. imensions are for reference only, and are subject to change without notice.

82 ote:

83 ote: ASAK PRESSI UBE FIIGS

REPUTE tube fittings are manufactured to stringent quality control program and internal standards which

Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are