ULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings

Size: px

Start display at page:

Download "ULTRA HIGH PURITY METAL FACE SEAL & Micro Fit Weld Fittings"

Liliana Watson
5 years ago
Views:

1 UR HIGH PURIY FC S & icro Fit Weld Fittings

OGP CH UHP ubes & Pipes Features Provide quick assembly and dismantling of components and tubes.

inimize and reduce dead volumes and measurements. eet for highest advanced specifications.

etching marking for full traceability when providing identification, material type, heat number and process number for full traceability xcellent inside diameter

2 OGP CH UHP ubes & Pipes Features Provide quick assembly and dismantling of components and tubes. Guarantee high purity leak free service from high vacuum to positive high pressure. chieve high quality butt welding between tubes and fittings. inimize and reduce dead volumes and measurements. eet for highest advanced specifications. etal Face Seal Fittings Sliver plated female threads to ensure easy assembly, consistent make-up and prevention of galling wo test ports for easy leaking test aser etching marking for full traceability when providing identification, material type, heat number and process number for full traceability xcellent inside diameter surface finish level for high purity and maximum performance Precision finished gasket for leak tight and maximum performance ypical etal Face Seal Fittings ssemblies ale Nut Gland-S Gasket Gland-S Female Nut etal Face Seal Fitting ody he gasket is compressed by two highly polished beads when the male and female nuts are engaged. 2

UHP ubes & Pipes OGP CH icro Fit Weld Fittings xcellent inside diameter surface finish level for high purity and maximum performance

providing identification, material type, heat number and process number for full traceability urr free, square and sharp tube butt

When using a Gasket, place it into the female nut whenever possible. No special positioning is needed as the gasket is self-aligning.

he retainer assembly will locate the gasket over the bead and hold it in place.

ighten the female nut to the male nut or body finger-tight. 4.

Caution: lways use a clean environment, and always employ proper clean-room protocol for make up and assembly of high purity fittings

3 UHP ubes & Pipes OGP CH icro Fit Weld Fittings xcellent inside diameter surface finish level for high purity and maximum performance Radius junction for smooth flow transition and elimination of entrapment zones aser etching marking for full traceability when providing identification, material type, heat number and process number for full traceability urr free, square and sharp tube butt weld (W) ends for enhanced alignment and maintain tube wall thickness at uniformity ssembly Instruction 1. When using a Gasket, place it into the female nut whenever possible. No special positioning is needed as the gasket is self-aligning. 2. When using a Gasket Retainer assembly, press the assembly onto the gland as shown. he retainer assembly will locate the gasket over the bead and hold it in place. e careful not to scratch or nick the bead as this may affect fitting performance. 3. ighten the female nut to the male nut or body finger-tight. 4. ighten the female nut 1/8 turn past finger-tight while hold the male nut or body hex stationary with a backup wrench. Caution: lways use a clean environment, and always employ proper clean-room protocol for make up and assembly of high purity fittings and applications. e sure to protect all fittings until assembly and make up. xercise great care that the sealing surfaces are not scratched, damaged or contaminated in any way during handling and assembly. xcessive over-tightening will damage the sealing beads and possibly cause system leakage. etal face seal connections are remarkable. Use a new gasket for each remake as the gasket is of single use 3

4 OGP CH UHP ubes & Pipes Ultra High Purity ll metal face seal and micro-fit weld fittings are available with controlled surface finishes, electopolished, and specially cleaned to meet ultrahigh-purity system requirements. Inside Diameter Surface Finish evel Grade verage (Ra) aximum (Ry) µm µinch µm µinch < 0.25 < 10 < 3.0 < 120 P < 0.13 < 5 < 0.7 < 28 Inside Diameter Surface Finish evel nalysis S, SC/XPS and S analysis are conducted to measure surface cleanliness and anticorrosion requirements in accordance with S specifications. Referenced Specifications. S - S SD SC/XPS - S SD S - S SD Plating Sliver plated female threads to ensure easy assembly, consistent make-up, prevention of galling and reduction of the torque when assembling. aterials aterials Specfication Glands, odies and Weld Fittings 316SS Forging - S SS ar Stock - S S479 Nuts, Plugs, Caps and etal Face Seal hreaded Fittings 316SS Forging - S SS ar Stock - S S479 Gaskets Nickel S SS S 167 Pressure Rating ube. 1/4 3/8 Wall hickness mm 0.89mm mm 0.89mm Pressure Rating psig bar /2 1.24mm /4 1.65mm mm Pressure ratings are calculated in accordance with NSI/ S 31.3 for stainless steel pressure piping at room temperature. emperature Rating ypes aterials F C Fittings 316SS 316SS Gaskets 316SS Nickel Helium eak est etal face seal fittings are rated to a helium leak rate of less than 1x10-9 mbar.l/sec and tested in accordance with S SD and SI F1-96. Particle Contribution est s per S F oisture Contribution est s per S SD. Cleaning ll fittings are rinsed with 18 Ω DI water and purged with % filtered nitrogen and are packed in an Class 10 cleanroom. Reference specification : SI Packing nds are faced and protected with polyamide nylon film and polyethylene caps. packed in single ( grade) or double (P grade) polyethylene bags. Referenced specification : SI

5 UHP ubes & Pipes OGP CH How o Order etal face seal fittings and micro-fit weld fittings are ordered by part number as shown as below. he following part number, S, is designated for icro lbow, 1/2 OD, P, 316SS. 12 S Seal ype Fitting ype. 1 2 Inner Surface Finish evel aterial he following part number, F-G-14--S, is designated for ong Gland, 1/4 OD, P, 316SS. F G 14 S Seal ype Fitting ype. 1 2 Inner Surface Finish evel aterial ube. Fractional(Inch) ube. Designation inch 1/4 3/8 1/2 3/4 1 mm Designator etal Face Seal Designation 1/4 1/2 3/4 1 Designator Pipe Designation Pipe 1/8 1/4 3/8 1/2 3/4 1 Designator hread ype Designator NP NSI (NP) N ISO apered JIS 0203(P), DIN2999, ISO7, S 21(SP) R Inside Diameter Surface Finish evel Designation evel P Designator aterial Grade Designation Grade Nickel Designator SS S NI 5

OGP CH UHP ubes & Pipes Visual Index icro Fit Weld Fittings 8 icro lbow 90 R 8 Reducing icro lbow O 8 icro

11 Reducing ong Union etal Face Seal Fittings Glands GS 11 icro Gland Short G 11 icro Gland ong G 12 ong

Gland G 13 lind Gland Nuts, Caps, Plugs, Gaskets FN 13 Female Nut C 9 icro Cross SGS 11 Short Gland Short N

6 OGP CH UHP ubes & Pipes Visual Index icro Fit Weld Fittings 8 icro lbow 90 R 8 Reducing icro lbow O 8 icro lbow 45 8 icro ee R 9 Reducing icro ee 9 icro ribow R 10 Reducing ong lbow 10 ong ee R 10 Reducing ong ee RU 11 Reducing ong Union etal Face Seal Fittings Glands GS 11 icro Gland Short G 11 icro Gland ong G 12 ong Gland ong SWSG 12 Socket Weld Short Gland SWG 13 Socket Weld ong Gland SWGR 13 Reducing Socket Weld ong Gland G 13 lind Gland Nuts, Caps, Plugs, Gaskets FN 13 Female Nut C 9 icro Cross SGS 11 Short Gland Short N 13 ale Nut RU 9 Reducing icro Union SG 12 Short Gland ong CP 14 Cap 10 ong lbow 90 GS 12 ong Gland Short PG 14 Plug 6

UHP ubes & Pipes OGP CH G 14 Gasket GR 14 Gasket Retainer G 14 lind Gasket DU 16

Face Seal to W W 18 W dapter W 18 ulkhead W dapter etal Face Seal to ok High Flow

HN 15 HF ale Nut etal Face Seal hreaded Fittings etal Face Seal to etal Face Seal U

17 Reducing dapter R 17 Reducing ushing FC 17 Coupling C 18 ok Connector C 18 ulkhead

7 UHP ubes & Pipes OGP CH G 14 Gasket GR 14 Gasket Retainer G 14 lind Gasket DU 16 Double ale Union DUR 16 Reducing Double ale Union DU 16 ulkhead Double ale Union etal Face Seal to W W 18 W dapter W 18 ulkhead W dapter etal Face Seal to ok High Flow Components HG 15 HF Gland H 15 HF dapter H 15 HF ulkhead dapter HFN 15 HF Female Nut HN 15 HF ale Nut etal Face Seal hreaded Fittings etal Face Seal to etal Face Seal U 16 Union lbow U 17 Union ee UC 17 Union Cross DFUR 17 Reducing Double Female Union R 17 Reducing dapter R 17 Reducing ushing FC 17 Coupling C 18 ok Connector C 18 ulkhead ok Connector etal Face Seal to hreaded C 19 ale Connector 19 ale lbow FC 19 Female Connector 7

8 OGP CH OGP CH UHP ubes & Pipes icro Fit Weld Fittings icro lbow 90 ube ube W., inch mm inch mm F Welds Fractional ubes -18 1/ / / / / / Welds etric ubes Reducing icro lbow R 1 1 ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm F Welds Fractional ubes R / / R / / R / / R / / Welds etric ubes R R R icro lbow 45 O 45 ube ube W., inch mm inch mm F Welds Fractional ubes O-14-1/ O-14 1/ O-38 3/ O-12 1/ Welds etric ubes O O O O icro ee ube ube W., inch mm inch mm F Welds Fractional ubes -18 1/ / / / / / Welds etric ubes

UHP ubes & Pipes OGP CH OGP CH Reducing icro ee R 1 1 ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm F Welds Fractional ubes R-14-18 1/4 0.039 1/8 3.17 0.028 0.71 20.64 10.32 7.

99 13.50 14.29 icro ribow ube ube W., inch mm inch mm F Welds Fractional ubes -14-1/4 0.035 0.89 14.29 10.32 7.94-14 1/4 0.039-38 3/8 9.53 17.46 11.91 11.11-12 1/2 12.70 0.049 1.24 20.64 13.50 14.29 Welds etric ubes -06 6 14.

9 UHP ubes & Pipes OGP CH OGP CH Reducing icro ee R 1 1 ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm F Welds Fractional ubes R / / R / / R / / R / / Welds etric ubes R R R icro ribow ube ube W., inch mm inch mm F Welds Fractional ubes -14-1/ / / / Welds etric ubes icro Cross C ube ube W., inch mm inch mm F Welds Fractional ubes C-14-1/ C-14 1/ C-38 3/ C-12 1/ Welds etric ubes C C C C Reducing icro Union RU 1 1 ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm Welds Fractional ubes RU /4 1/ RU / /4 RU / / RU / / RU / /4 RU / / RU / / Welds etric ubes RU RU RU RU RU RU

10 OGP CH OGP CH UHP ubes & Pipes ong lbow 90 ube ube W., inch mm inch mm F Welds Fractional ubes -14 1/ / / / Welds etric ubes Reducing ong lbow R 1 ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm F Welds Fractional ubes R / / R / / R / / R / / R / / R / / ong ee ube ube W., inch mm inch mm F Welds Fractional ubes -14 1/ / / / Welds etric ubes Reducing ong ee R ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm F Welds Fractional ubes R / / R / / R / / R / / R / / R / /

11 UHP ubes & Pipes OGP CH OGP CH Reducing ong Union RU ube ube W., ube 1 ube W., 1 inch mm inch mm inch mm inch mm Welds Fractional ubes RU / /4 RU / / RU / / RU / /4 RU / / RU / RU / RU / RU / Welds etric ubes RU RU RU RU RU RU RU RU RU RU etal Face Seal Fittings - Glands icro Gland Short GS ube ube W., inch mm inch mm GS-14 1/4 1/ GS /2 1/ GS /2 3/ GS-12 1/2 1/ icro Gland ong G ube ube W., inch mm inch mm G-14 1/4 1/ G /2 1/ G /2 3/ G-12 1/2 1/ Short Gland Short SGS ube ube W., inch mm inch mm SGS-14 1/4 1/ SGS /2 1/ SGS /2 3/ SGS-12 1/2 1/

12 OGP CH OGP CH UHP ubes & Pipes Short Gland ong SG ube ube W., inch mm inch mm SG /4 1/ SG-14 1/4 1/ SG /2 1/ SG /2 3/ SG-12 1/2 1/ ong Gland Short GS ube ube W., inch mm inch mm GS /4 1/ GS-14 1/4 1/ GS /2 1/ GS /2 3/ GS-12 1/2 1/ GS /4 1/ GS /4 3/ GS /4 1/ GS-34 3/4 3/ GS / GS / GS / GS / GS GS GS GS GS GS ong Gland ong G ube ube W., inch mm inch mm G-14 1/4 1/ G /2 1/ G /2 3/ G-12 1/2 1/ G /4 1/ G /4 3/ G /4 1/ G-34 3/4 3/ G / G / G / G / G G G G G G Socket Weld Short Gland SWSG ube ube W., inch mm inch mm D SWSG-14 1/4 1/ D ube 12

13 UHP ubes & Pipes OGP CH OGP CH Socket Weld ong Gland SWG ube I.D ube ube W., inch mm inch mm D SWG-14 1/4 1/ SWG /2 3/ SWG-12 1/2 1/ SWG-34 3/4 3/ SWG Reducing Socket Weld ong Gland SWGR ube ube W., inch mm inch mm D SWGR-14 1/4 1/ SWGR /2 1/ D ube lind Gland G ube inch mm G-14 1/4 1/ G-12 1/2 1/ G-34 3/4 3/ G etal Face Seal Fittings Nuts, Caps, Plugs, Gaskets Female Nut FN F FN-14 1/ /16-18UNF FN-12 1/ /8-14UNF FN-34 3/ /4-18UNF FN /2-20UNF eak est Port ale Nut N F N-14 1/ /16-18UNF N-12 1/ /8-14UNF N-34 3/ /4-18UNF N /2-20UNF 45 13

14 OGP CH UHP ubes & Pipes Cap CP F CP-14 1/ /16-18UNF CP-12 1/ /8-14UNF CP-34 3/ /4-18UNF CP /2-20UNF eak est Port Plug PG F PG-14 1/ /16-18UNF PG-12 1/ /8-14UNF PG-34 3/ /4-18UNF PG /2-20UNF Gasket G I.D G-14 1/ G-12 1/ G-34 3/ G I.D Gasket Retainer GR I.D I.D GR-14 1/ GR-12 1/ GR-34 3/ GR lind Gasket G G-14 1/ G-12 1/ G-34 3/ G

15 UHP ubes & Pipes etal Face Seal Fittings High Flow Components OGP CH OGP CH HF Gland HG ube ube W., inch mm inch mm HG /4 3/ HG /2 3/ HF dapter H ube ube W., inch mm inch mm F H /4 3/ /16-18UNF HF ulkhead dapter H ube ube W., inch mm inch mm F Panel Hole H /4 3/ /16-18UNF HF Female Nut HFN F HFN-14 1/ /16-18UNF eak est Port HF ale Nut HN F HN-14 1/ /16-18UNF 15

OGP CH OGP CH UHP ubes & Pipes etal Face Seal (FS) hreaded Fittings FS to FS Double ale Union DU F DU-14 1/4 39.40 4.57 15.87 9/16-18UNF DU-12 1/2 47.20 10.22 23.80 7/8-14UNF DU-34 3/4 62.00 15.70 33.

16 OGP CH OGP CH UHP ubes & Pipes etal Face Seal (FS) hreaded Fittings FS to FS Double ale Union DU F DU-14 1/ /16-18UNF DU-12 1/ /8-14UNF DU-34 3/ /4-18UNF DU /2-20UNF Reducing Double ale Union DUR 1 F DUR /2 1/ /8-14UNF 9/16-18UNF ulkhead Double ale Union DU F Panel Hole DU-14 1/ /16-18UNF DU-12 1/ /8-14UNF Union lbow U F U-14 1/ /16-18UNF U-12 1/ /8-14UNF U-34 3/ /4-18UNF U /2-20UNF 16

UHP ubes & Pipes OGP CH OGP CH Union ee U F U-14 1/4 27.20 4.35 12.70 9/16-18UNF U-12 1/2 36.80 10.22 20.63 7/8-14UNF U-34 3/4 48.80 15.75 31.75 1 1/4-18UNF U-1 1 50.80 22.10 42.

17 UHP ubes & Pipes OGP CH OGP CH Union ee U F U-14 1/ /16-18UNF U-12 1/ /8-14UNF U-34 3/ /4-18UNF U /2-20UNF Union Cross UC F UC-14 1/ /16-18UNF UC-12 1/ /8-14UNF UC-34 3/ /4-18UNF UC /2-20UNF Reducing Double Female Union F DUR /2 1/ /8-14UNF 9/16-18UNF 1 DFUR 1 eak est Port Reducing dapter R F R /2 1/ /8-14UNF 9/16-18UNF 1 1 Reducing ushing R F R /2 1/ /16-18UNF 7/8-14UNF 1 1 Coupling FC F FC-14 1/ /16-18UNF FC-12 1/ /8-14UNF FC-34 3/ /4-18UNF FC /2-20UNF 17

18 OGP CH OGP CH UHP ubes & Pipes etal Face Seal (FS) hreaded Fittings FS to W W dapter W ube ube W., inch mm inch mm F W-14 1/4 1/ /16-18UNF W /2 3/ /8-14UNF W-12 1/2 1/ /4-18UNF ulkhead W dapter W ube ube W., inch mm inch mm F Panel Hole W-14 1/4 1/ /16-18UNF W /2 3/ /8-14UNF W-12 1/2 1/ /4-18UNF etal Face Seal (FS) hreaded Fittings FS to ok ok Connector C C ube ube inch mm C H F C /4 1/ /16-18UNF C-14 1/4 1/ /16-18UNF C /2 3/ /8-14UNF C-12 1/2 1/ /8-14UNF H ulkhead ok Connector C ube inch mm C H F Panel Hole C-14 1/4 1/ /16-18UNF C /2 3/ /8-14UNF C-12 1/2 1/ /8-14UNF C ube H 18

UHP ubes & Pipes OGP CH etal Face Seal (FS) hreaded Fittings FS to hreaded ale Connector C P hread P-NP (P) F C-14-18N 1/4 1/8 33.30 9.60 4.35 9/16-18UNF 15.90 C-14-14N 1/4 1/4 37.84 4.

19 UHP ubes & Pipes OGP CH etal Face Seal (FS) hreaded Fittings FS to hreaded ale Connector C P hread P-NP (P) F C-14-18N 1/4 1/ /16-18UNF C-14-14N 1/4 1/ /16-18UNF C-12-14N 1/2 1/ /8-14UNF C-12-38N 1/2 3/ /8-14UNF C-12-12N 1/2 1/ /8-14UNF C-34-34N 3/4 3/ /4-18UNF C-1-1N /2-20UNF ale lbow hread P-NP (P) 1 F N 1/4 1/ /16-18UNF N 1/2 3/ /16-18UNF N 1/2 1/ /8-14UNF N 3/4 3/ /8-14UNF 1 P Female Connector FC P hread P-NP (P) F FC-14-18N 1/4 1/ /16-18UNF FC-14-14N 1/4 1/ /16-18UNF FC-12-38N 1/2 3/ /8-14UNF FC-12-12N 1/2 1/ /8-14UNF FC-34-34N 3/4 3/ /4-18UNF FC-1-1N /2-20UNF 19

20 YOUR SRGIC PRNR S DVOPR & NUFCURR OF YOUR OWN RND S SOURCING SPIS & SOUION PROVIDR Rm1034,he Rubens ower,19, Jangback-Ro, Ilsandong - Gu, Goyang - Shi, Kyounggi, Korea el : Fax : obile : (ustin Kim/D) -mail : austin@ogptech.com

ULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS.

ULTRA HIGH PURITY METAL FACE SEAL & WELD FITTINGS. UR HIGH PURIY C S & W IINGS www.unilok.com Weld & etal ace Seal ittings Uni-ok Weld & etal ace Seal () fittings are designed and manufactured as high performance and high purity components by our own know-how