PRESSURE TRANSDUCERS. Specifications. Integral Connector Versions

Transcription

1 GMS OMPLINT 00 Series and 00 Heavy Duty Series ompact OM Pressure Transmitters xceptional Long Term Stability 0-00 psi to 0-0,000 psi Ranges (0- bar to 0-,00 bar) High Proof Pressures with ll Stainless Steel Wetted Parts road hoice of Outputs, lectrical ors, and Pressure Ports Dual Pressure and Temperature Sensing option Integral or Versions Deutsch DT0-P Ro HS H-0 00 and 00 Series offer high levels of stability and reliability with proven sputtered thin film technology and unbeatable price performance ratio in a small package size. broad choice of electrical and pressure connections allow stock configurations to suit most applications without modification. Specifications Performance Long Term Drift 0.% FS/YR (non-cumulative) ccuracy % FS % FS for >000 psi (60 bar) 0.50% FS for <000 psi (60 bar) Thermal rror % FS/00 F (.5% FS/00 ) 00 % FS/00 for <000 psi (60 bar) ompensated Temperatures -0 F to +5 F (-0 to +5 ) Operating Temperatures -0 F to +5 F (-0 to +5 ) for elec. codes,,, G, 6, 8, 9, Y -5 F to +80 F (-0 to +80 ) for elec. codes F,, W Zero Tolerance % of span % of span for >000 psi (60 bar).00% of span for <000 psi (60 bar) Span Tolerance % of span % of span for >000 psi (60 bar).00% of span for <000 psi (60 bar) Response Time ms Fatigue Life Designed for more than 00 M cycles Mechanical onfiguration Pressure Port See under How to Order, last page Wetted Parts - PH Stainless Steel Housing 0 Stainless Steel lectrical ion See under How to Order, last page nclosure IP6 (IP65 for electrical codes G & W) Vibration 0G peak to peak sinusoidal, (Random Vibration: 0 to 000 approx. 0G peak per MIL-STD-80) Shock Withstands free fall to I 68-- procedure M (Radiated Immunity) 00 V/m pprovals, conforms to uropean Pressure Directive, Fully RoHS compliant, RN Registered to NSI/SM., UL recognized files # 98 & 8 Weight.8-5. ounces (50-50 grams). onfiguration dependent. Voltage Output (-wire) 0 V min. to 0 V max. See under How to Order, last page Supply Voltage Volts above full scale to 0 VD m (6.5 m on dual output version) Source and Sinks m urrent Output (-wire) -0 m Supply Voltage 8-0 VD Maximum Loop Resistance (Supply Voltage-8) x 50 ohms Ratiometric Output 0.5 to.5 m (6.5 m on dual output version) Supply Voltage 5 VD ±0% Packard MetriPack Large DIN Mil- 0-6P (68) Wire & able Options Flying Lead onduit Deutsch DT0-P mp Superseal.5 DIN 9. mm M x P able Series / pof5 / 0-MY-8

2 SPUTT THIN FILM Pressure apability Pressure Range PSI (ar) (-5).00 x FS 500-,500 (0-00) Proof Pressure (x Full Scale) Pressure Ports and Dimensions in Inches. Dimensions in MM. urst Pressure (x Full Scale) x FS,000-6,000 (60-00).00 x FS 0 x FS,500-9,000 (600).00 x FS 0,000 (00) x FS >60,000 PSI 5,000 (,000).50 x FS (,000 bar) 5,000 (,800).8 x FS.0 x FS 0,000 (,00).5 x FS 0 x FS 0 x FS D Fitting ode 08 = /8 - D = /8 - F Dryseal 0 = / -8 O = / -8 Internal Torque - TFFT* /8"- - TFFT* F - TFFT* - TFFT* N Fitting ode = / -8 /"-8 F Dryseal N = /8- UNF J = /6-0 UNF 0 = /6-0 UNF with Flare J96/:/8- Torque - TFFT* 8-0 NM 8-0 NM 5-6 NM G P Fitting ode G = Female /6 Schraeder P = 9/6-8 "Heavy Duty" 6 = utoclave F50 0 G/ = G/ -9 xternal Torque Schraeder 8-0 Deflator NM(Shallow) J96/:9/ NM"Heavy Duty" utoclave 8-0 F50 NM 0-5 NM 05 OL T utoclave Fitting ode 05 = G/ - G/" 9 Integral Integral Face Seal Face-Seal OL ISO = 69-:M x.5 x.5 T = Mx.5 ISO HP 69-:M Metal x.5washer Seal J = M x.5 Torque 0-5 NM 8-0 NM 0-5 NM 0-5 NM * Threads - turns from finger tight. Wrench tighten - turns. General Notes:. The diameter of all cans is 9 mm (0.8 ). Hex is mm (0.866 ) cross Flats (/F) for deep socket mounting. O-Ring material, where applicable, is Viton unless otherwise specified Series / pof5 / 0-MY-8 H-

3 Integral or Versions DIN 9. mm M x P mp Superseal.5 Deutsch DT0-P KY POLRIZING WID ONTT.0 (5.9) 0.0 (.9) M x P 0.86 (.9) 0.8 (9.) 0. (8.).56 (9.).5 (8.) ode ode R ode ode 6 ode 8 # Voltage Mode urrent Mode Voltage Mode urrent Mode Voltage Mode urrent Mode Voltage Mode urrent Mode Voltage Mode urrent Mode +IN +IN +IN +IN +IN +IN +IN +IN P +IN +IN P P P P Mil- 0-6P (68) Deutsch DT0-P Packard MetriPack DIN 650 F ID. (0.) 0.9 (0) D Ø0.59 (5) 0.0 (.9).5 (8.) ode ode Y ode 9 ode G.5 (8.6) Voltage Mode urrent Mode Voltage Mode urrent Mode Voltage Mode urrent Mode #. (5.0) MX Ø.0 (6.50) Voltage Mode urrent Mode +IN +IN +IN +IN +IN +IN +IN +IN P P *This pin is used for temperature sensing output when this option is utilized. Otherwise, the pin is used for P. H Series / pof5 / 0-MY-8

4 SPUTT THIN FILM Wire & able Options LK able / onduit ion Flying Lead GRN LK GRN WG L (PV) WG L (PV) L GLND L GLND / LK.0 (50.8). (60.) HX.0 (5.) ode F ode ode W Wire olor Voltage Mode urrent Mode Voltage Mode urrent Mode Voltage Mode urrent Mode Red +IN +IN +IN +IN +IN +IN lack White Green P P *This pin is used for temperature sensing output when this option is utilized. Otherwise, the pin is used for P. Wiring Diagram urrent Output Mode (Load Resistor Range) POWR SUPPLY (-) (+) IN (+) OMMON (-) (+) OUT(+) RDOUT POWR SUPPLY (-) (+) + (-) (+) (-) RDOUT VOLTG OUTPUT TRNSDUR URRNT OUTPUT TRNSDUR USTOMR LOD RSISTOR (OHMS) MXIMUM RSISTOR (RL) USTOMR SUPPLY VOLTG (V) Minimum Resistor Value = 50 * (+V ) for +V > V Maximum Resistor Value = 50 * (+V 8) for +V > 8V MINIMUM RSISTOR (RL) Note: Mating connectors available upon request - contact factory Series / pof5 / 0-MY-8 H-

5 How to Order Use the bold characters from the chart below to construct a product code 00 00PG 0 R 0 Series 00 / 00 - Pressure Transducer ombination Pressure and Temperature 0 / 0 - Temp. Output Range -0 to 5 0 / 0 - Temp. Output Range 0 to 00 0 / 0 - Temp. Output Range 0 to 80 Output - -0 m - -6 V H - -5 V N V R V S V T V Ratiometric Pressure Range psi 00PG psig 0PG - 0-,000 psig 0KPS = 0-0,000 psis 50PG psig 5PG - 0-,500 psig 5KPS - 0-5,000 psis 00PG psig 0PS - 0-,000 psis 0KPS - 0-0,000 psis 00PG psig 5PS - 0-,500 psis 5KPS - 0-5,000 psis 500PG psig 0PS - 0-,000 psis 600PG psig 50PG psig 5PS - 0-,500 psis 0PS - 0-,000 psis 50PS - 0-5,000 psis 60PS - 0-6,000 psis 5PS - 0-,500 psis Pressure Range - bar 000G - 0- barg 060S bars 000S -,000 bars 000G barg 050S bars 600S -,600 bars 006G barg 000S bars 005G barg 0600S bars 000G barg 0060G barg 000G barg Notes:. Temperature outputs are for voltage output pressure sensors only (applies to codes -, -H, -N, and -T only) and limited to electrical codes -, -, -, -F, -G, -, and -8. ccuracy is.5% of temperature span. Requires additional m of power.. For use with pull-up or pull-down resistors, contact factory.. 500PG psig not available as 00 Series in output code m.. Ranges 5,000 psi (,000 bar) and above available with -T & -6 pressure ports only. 5. Pressure ports O, 6, and G are not available with the -R Restrictor option. 6. For electrical codes F &, specify cable length in meters. -Day Delivery on Most Transducers able Length (For electrical connections F & only) 00 - No able 0 - meter 0 - meters 0 - meters 0 - meters 05-5 meters Optional Restrictor (00 only) R - Restrictor 0 - No Restrictor lectrical ion 6 - Industrial DIN 9. mm (mating connector not supplied) - Mil- 0-6P (68) - M x P (-) F - able version G - Large DIN R - Industrial DIN 9. mm (alternate pin out) W - Flying lead ( es/00mm) Y - Deutsch DT0-P - / Male onduit 6 - mp - Superseal.5 Series 8 - Deutsch DT0-P 9 - Packard MetriPack Pressure Port /8- xternal 0 - /-8 xternal 0 - /6-0 xternal ( #, J5) 0 - / -8 Internal G - Schrader #, /6 Internal J - /6-0 xternal ( #, J96-) P - 6 (9/6-8 UNF ) - /-8 F xternal (Dryseal) D - /8- F xternal (Dryseal) N - /8- UNF xternal ( J96) 6 - utoclave 50 Internal (5,000 psi, >000 bar) uropean Threads 0 - G/ xternal 05 - G/ xternal Soft Seal 0L - M x.5 (<,000 bar, 5,000 psi) T - M x.5 (6g) (,000 bar, 5,000 psi) J - M x.5 Straight H Series / p5of5 / 0-MY-8