Absolute Encoders Multiturn

Size: px
Start display at page:

Download "Absolute Encoders Multiturn"

Transcription

1 The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just 36 x 4 mm it offers a through hollow shaft of up to 8 mm or a blind hollow shaft of up to 0 mm. RoHS Safety-Lock TM High rotational speed C Temperature range IP High protection level High shaft load capacity Shock / vibration resistant Magnetic field proof Reverse polarity protection SinCos Optical sensor Seawater-resistant version on request Reliable and insensitive Sturdy bearing construction in Safety-Lock Design for resistance against vibration and installation errors Reduced number of components ensures magnetic insensitivity IP67 protection and wide temperature range -40 C C Patented Intelligent Scan Technology (with all singleturn and multiturn functions on one single OptoASIC) - offering highest reliability, a high resolution up to 4 bits and 00% magnetic field insensitiveness Optimised performance High precision with data refresh rate of the position value μs High resolution feedback in real-time via incremental outputs SinCos and RS4 Short control cycles, clock frequency with SSI up to MHz / with BiSS-C up to 0 MHz Order code Shaft version 8.F3663. X Type a Flange = clamping flange, IP67, ø 36 mm [.4 ] 3 = clamping flange, IP65, ø 36 mm [.4 ] = synchro flange, IP67, ø 36 mm [.4 ] 4 = synchro flange, IP65, ø 36 mm [.4 ] b Shaft (ø x L), with flat = ø 6 x.5 mm [0.4 x 0.49 ] 3 = ø 8 x 5 mm [0.3 x 0.59 ] 5 = ø 0 x 0 mm [0.39 x 0.79 ] = ø /4 x.5 mm [0.49 ] 4 = ø 3/8 x 5/8 a X b X X c d. X e X X f g c Interface / Power supply = SSI or BiSS-C / 5 V DC = SSI or BiSS-C / V DC 3 = SSI or BiSS-C ppr SinCos / 5 V DC 4 = SSI or BiSS-C ppr SinCos / V DC 5 = SSI or BiSS-C, with sensor output for monitoring the voltage on the encoder / 5 V DC 6 = SSI or BiSS-C ppr SinCos, with sensor output for monitoring the voltage on the encoder / 5 V DC 7 = SSI or BiSS-C ppr incr. signals RS4 / 5 V DC 8 = SSI or BiSS-C ppr incr. signals RS4 / V DC d Type of connection = cable, tangential, m [3.8 ] PUR 3 = cable tangential, 5 m [6.40 ] PUR 5 = cable, tangential, m [3.8 ] PUR with M connector for central fastening, 8-pin ) If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. e Code B = SSI, Binary C = BiSS-C, Binary G = SSI, Gray f Resolution (Singleturn) A = 0 bit ST = bit ST 3 = 3 bit ST 4 = 4 bit ST 7 = 7 bit ST g Resolution (Multiturn) = bit MT 6 = 6 bit MT 4 = 4 bit MT optional on request - seawater-resistant - special cable length ) Only with interface and 4 Fritz Kübler GmbH, subject to errors and changes. 05/04

2 Order code Hollow shaft 8.F3683. X Type a Flange = with spring element short, IP65 3 = with spring element long, IP65 = with stator coupling, ø 46 mm [.8 ] b Hollow shaft = ø 6 mm [0.4 ] 3 = ø 8 mm [0.3 ] 4 = ø 0 mm [0.39 ], blind hollow shaft = ø /4 Mounting accessory for shaft encoders a X b X X c d. X e X X f g c Interface / Power supply = SSI or BiSS-C / 5 V DC = SSI or BiSS-C / V DC 3 = SSI or BiSS-C ppr SinCos / 5 V DC 4 = SSI or BiSS-C ppr SinCos / V DC 5 = SSI or BiSS-C, with sensor output for monitoring the voltage on the encoder / 5 V DC 6 = SSI or BiSS-C ppr SinCos, with sensor output for monitoring the voltage on the encoder / 5 V DC 7 = SSI or BiSS-C ppr incr. signals RS4 / 5 V DC 8 = SSI or BiSS-C ppr incr. signals RS4 / V DC d Type of connection = cable, tangential, m [3.8 ] PUR 3 = cable tangential, 5 m [6.40 ] PUR 5 = cable, tangential, m [3.8 ] PUR with M connector for central fastening, 8-pin ) If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. e Code B = SSI, Binary C = BiSS-C, Binary G = SSI, Gray f Resolution (Singleturn) A = 0 bit ST = bit ST 3 = 3 bit ST 4 = 4 bit ST 7 = 7 bit ST g Resolution (Multiturn) = bit MT 6 = 6 bit MT 4 = 4 bit MT optional on request - seawater-resistant - special cable length Order No. Coupling Bellows coupling ø 9 mm [0.75 ] for shaft 8 mm [0.3 ] Absolute Encoders Multiturn Mounting accessory for hollow shaft encoders Cylindrical pin, long 8 0,3 With fixing thread , SW7 [0,8] for torque stops 0,6 0,6 4 m8 M4 30,8 R 7 0,8 Connection technology Connector, self-assembly (straight) M female connector with coupling nut 05.CMB 88-0 Cordset, pre-assembled M female connector with coupling nut, m [6.56 ] PUR cable M Further accessories can be found in the accessories section or in the accessories area of our website at: Additional connectors can be found in the connection technology section or in the connection technology area of our website at: Technical data Mechanical characteristics Maximum speed Shaft- or blind hollow shaft version 000 min - without shaft seal (IP65) min - (continuous) Shaft version (IP67) or hollow shaft version min - (IP65) with shaft seal min - (continuous) Starting torque without shaft seal < Nm at 0 C [68 F] with shaft seal (IP67) < 0.0 Nm Shaft load capacity radial 40 N axial 0 N Weight approx. 0. kg [7.06 oz] Protection acc. to EN 6059 housing side IP67 shaft side IP65 (solid shaft version opt. IP67) Working temperature range -40 C C [-40 F F] Materials shaft / hollow shaft stainless steel flange aluminium housing zinc die-cast cable PUR Shock resistance acc. to EN Vibration resistance acc. to EN m/s, 6 ms 00 m/s, Hz ) Only with output circuits and Fritz Kübler GmbH, subject to errors and changes. 05/04 5

3 Electrical characteristics Power supply Current consumption (no load) 5 V DC max. 60 ma V DC max. 30 ma Reverse polarity protection of the power supply Short-circuit proof outputs yes ) UL approval File 468 CE compliant acc. to RoHS compliant acc. to SSI interface Output driver Permissible load/channel 5 V DC ± 5% or V DC yes (only with V DC) EMC guideline 004/08/EC guideline 0/65/EU RS485 transceiver type max. ± 30 ma Signal level HIGH typ 3.8 V LOW with I Load = 0 ma typ.3 V Resolution singleturn Number of revolutions Code SSI clock rate Monoflop time bit max. 4 bit Binary or Gray 50 khz... MHz 5 μs Note: If the clock cycle starts within the monoflop time a second data transfer begins with the same data. If the clock cycle starts after the monoflop time the cycle begins with the new values. The update rate is dependent on the clock speed, data length and monoflop time. Data refresh rate ST resolution 4 bit μs ST resolution 5 bit 4 μs Status and Parity bit on request SET input Input Input type active HIGH comparator Signal level HIGH min. 60 % of +V, max: +V (+V = power supply) LOW max. 30 % of +V Input current Min. pulse duration (SET) Input delay New position data readable after Internal processing time < 0.5 ma 0 ms ms ms 00 ms The encoder can be set to zero at any position by means of a HIGH signal on the SET input. Other preset values can be factory-programmed. The SET input has a signal processing time of approx. ms, after which the new position data can be read via SSI or BiSS-C. Once the SET function has been triggered, the encoder requires an internal processing time of typ. 00 ms; during this time the power supply must not be switched off. The SET function should be carried out whilst the encoder is at rest. Power ON delay After Power-ON the device requires a time of approx. 50 ms before valid data can be read. Hot plugging of the encoder should be avoided. DIR input A HIGH signal switches the direction of rotation from the default CW to CCW. This inverted function can also be factory-programmed. If DIR is changed when the device is already switched on, then this will be interpreted as an error. The status output will switch to LOW. Response time (DIR input) ms BiSS-C interface Resolution, singleturn Number of revolutions Code BiSS-C Clock rate Max. update rate Data refresh rate Note:: bit max. 4 bit Binary 50 khz... 0 MHz < 0 μs, depends on the clock rate and the data length μs Bidirectional, factory programmable parameters are: resolution, code, direction, alarms and warnings CRC data verification Status output Output driver Permissible load Signal level HIGH +V LOW < V Active Open Collector, internal pull up resistor kohm max. 0 ma LOW The status output serves to display various alarm or error messages. In normal operation the status output is HIGH (Open Collector with int. pull-up kohm). An active status output (LOW) displays: LED fault (failure or ageing) over-temperature undervoltage In the SSI mode, the fault indication can only be reset by switching off the power supply to the device. Incremental outputs (A/B), 048 ppr SinCos Max. frequency -3dB 400 khz 400 khz RS4 TTL-compatible Signal level Vpp (± 0%) HIGH: min..5 V LOW: max. 0.5 V Short circuit proof yes ) yes ) ) Short circuit proof to 0 V or to output when power supply correctly applied 6 Fritz Kübler GmbH, subject to errors and changes. 05/04

4 Terminal assignment,, 3 SET, DIR, Status Signal: 0 V +V C+ C- D+ D- SET DIR Stat H Cable colour: WH BN GN E G PK BU RD VT Shield Interface Type of connection Features M connector, 5 SET, DIR Signal: 0 V +V C+ C- D+ D- SET DIR H Pin: PH 3, 4, 3 SET, DIR, Signal: 0 V +V C+ C- D+ D- SET DIR A B H 048 SinCos Cable colour: WH BN GN E G PK BU RD BK VT G-PK RD-BU Shield 5, 3 SET, DIR, Signal: 0 V +V C+ C- D+ D- SET DIR 0 Vsens +Vsens H Sensor outputs Cable colour: WH BN GN E G PK BU RD VT RD-BU Shield 048 SinCos, Signal: 0 V +V C+ C- D+ D- 0 Vsens + Vsens A B H 6, 3 Sensor outputs Cable colour: WH BN GN E G PK BU RD BK VT G-PK RD-BU Shield Signal: 0 V +V C+ C- D+ D- A B H 7, 8, incr. RS4 Cable colour: WH BN GN E G PK BK VT G-PK RD-BU Shield Absolute Encoders Multiturn +V: Encoder power supply +V DC 0 V: Encoder power supply ground GND (0 V) 0 Vsens / +Vsens: Using the sensor outputs of the encoder, the voltage present can be measured and if necessary increased accordingly. A, : Incremental output channel A (cosine) B, : Incremental output channel B (sine) C+, C-: Clock signal D+, D-: Data signal SET: Set input. The current position becomes defined as position zero. DIR: Direction input: If this input is active, output values are counted backwards (decrease) when the shaft is turning clockwise. Stat: Status output PH H: Plug connector housing (Shield) Top view of mating side, male contact base M connector, 8-pin Fritz Kübler GmbH, subject to errors and changes. 05/04 7

5 Dimensions shaft version Dimensions in mm [inch] Clamping flange, ø 36 [.4] Flange type and 3 4, [.66] 3x0 M3, 6 [0.4] deep Battery (in the cable) 39 [.54] 36 [.4] 4 [.3] D h7 L 30 [.8] 3 [0.08] 7,7 [0.3] 4,5 [0.8] D L Fit 6 [0.4].5 [0.49] h7 8 [0.3] 5 [0.59] h7 0 [0.39] 0 [0.79] h7 /4.5 [0.49] h7 3/8 5/8 h7 5,5 [.07] m [3.8 ] 0.5 m [0.49 ] 5 m [6.40 ] 0.5 m [0.49 ] Synchro flange, ø 36 [.4] Flange type and 4 (Drawing with cable) 4, [.66] 45 M3, 6 [0.4] deep Battery (in the cable) 39 [.54] 36 [.4] 33 [.3] D h7 L,5 [0.],5 [0.] [0.08] 4,5 [0.8] 6 [.0] 90 D L Fit 6 [0.4].5 [0.49] h7 8 [0.3] 5 [0.59] h7 0 [0.39] 0 [0.79] h7 /4.5 [0.49] h7 3/8 5/8 h7 5,5 [.07] m [3.8 ] 0.5 m [0.49 ] 5 m [6.40 ] 0.5 m [0.49 ] 8 Fritz Kübler GmbH, subject to errors and changes. 05/04

6 Dimensions hollow shaft version Dimensions in mm [inch] Flange with spring element Flange type and 3 (Drawing with spring element short, spring element long is shown dashed) M.5, 5 [0.0] deep Spring element short Recommendation: Cylindrical pin DIN 7, ø 4 [0.6] 3 Spring element long Recommendation: Cylindrical pin DIN 7, ø 4 [0.6] 4 Battery (in the cable) 5 Recommended torque for the clamping ring 0.6 Nm D D 6 [0.4] 4 [0.94] 8 [0.3] 5.5 [.00] 0 [0.39] 5.5 [.00] /4 4 [0.94] 39 [.54] 36 [.4] D 7,5 [0.3] 5 5,7 [0.] 44,7 [.76] 3 [.] 4,5 [0.8] D H7 4,5 [0.96] 36,4 [.43] 33,4 [.3] [0.6] 3,99 4 [0.55] 8, [0.3] 4 5,5 [.07] Absolute Encoders Multiturn 7 m [3.8 ] 0.5 m [0.49 ] 5 m [6.40 ] 0.5 m [0.49 ] Insertion depth for blind hollow shaft 4.5 [0.57] Flange with stator coupling, ø 46 [.8] Flange type Battery (in the cable) 50, [.97] 44,8 [.76] 37, [.46] 30 53,6 [.] 46 [.8] 3, [0.3] Recommended torque for the clamping ring 0.6 Nm 39 [.54] D H7 D D 6 [0.4] 4 [0.94] 8 [0.3] 5.5 [.00] 0 [0.39] 5.5 [.00] /4 4 [0.94] 5,5 [.07] 7,5 [0.3] 5,7 [0.] 4,5 0,8 5,5 [.07] 7, m [3.8 ] 0.5 m [0.49 ] 5 m [6.40 ] 0.5 m [0.49 ] Insertion depth for blind hollow shaft 4.5 [0.57] Fritz Kübler GmbH, subject to errors and changes. 05/04 9

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5 and Sendix 7 singleturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional SinCos

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional

More information

Absolute Encoders Multiturn

Absolute Encoders Multiturn Absolute Encoders Multiturn Functional Safety, optical The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN

More information

Absolute Encoders Singleturn

Absolute Encoders Singleturn The absolute singleturn encoders Sendix 5853 SIL and 5873 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 6800-5- or PLe to DIN EN ISO 3849. The extra

More information

ENCODER. SSI Multiturn. Series , Key-Features: Content:

ENCODER. SSI Multiturn. Series , Key-Features: Content: ENCOER SSI Multiturn Series 8.5863, 8.5883 Content: Order Code Shaft... Order Code Hollow Shaft...3 Order Code Blind Hollow Shaft...3 Connection...4 Technical rawing...5 Technical ata...8 Key-Features:

More information

Rotary Measurement Technology Absolute Encoders, Multiturn

Rotary Measurement Technology Absolute Encoders, Multiturn Mechanical drive Safety-LockTM High rotational speed -40 to 90 C IP Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just 6 x 5 mm it offers a blind hollow shaft of

More information

Absolute encoders multiturn

Absolute encoders multiturn The Sendix F58 multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 00 percent magnetic insensitivity. bits total resolution,

More information

Absolute encoders multiturn

Absolute encoders multiturn Sendix M / M8 (shaft / hollow shaft) The Sendix M with Energy Harvesting Technology is an electronic multiturn encoder in miniature format, without gear and without battery. With a size of just x mm it

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant Due to their sturdy bearing construction in Safety Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up

More information

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants

Standard Sendix 5000 / 5020 (shaft / hollow shaft) Push-Pull / RS422 / Open collector. Robust performance. Many variants ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

Phone: Fax: Web: -

Phone: Fax: Web:  - ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up to

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

Absolute Encoders - Singleturn

Absolute Encoders - Singleturn SIL/PLd, optical Sendix SIL 585FS / 587FS (Shaft / Hollow shaft) The absolute singleturn encoders 585FS and 587FS of the Sendix SIL family are suited for use in safety-related applications up to SIL according

More information

XXXX e. X d.. X X X a

XXXX e. X d.. X X X a The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS

More information

ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features:

ENCODER. Analog Multiturn Encoder. Serie 8.M3661/M3681. Key-Features: ENCODER Multiturn Encoder Serie 8.M366/M368 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connections...5 Dimensions...6 - Shaft with max. 0 mm diameter - 0...5/0V, 4...20 ma analog

More information

Absolute encoders multiturn

Absolute encoders multiturn The absolute multiturn encoders 586FS and 588FS of the Sendix SIL family are suited for use in safety-related applications up to SIL according to EN 6800-5- or PLd to EN ISO 89-. The extra strong Safety-Lock

More information

Compact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e

Compact CANopen. RoHS 2/22. Shock / vibration resistant. High shaft load capacity e The Sendix M36 with Energy Harvesting Technology is an electronic encoder in miniature format, without gear and without battery. It is characterized by robustness, reliability and cost-efficiency. pending

More information

ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features:

ENCODER. Analog Multiturn Encoder. Serie 8.M5861. Key-Features: ENCODER Multiturn Encoder Serie 8.M5861 Key-Features: Content: Order Code...2 Technical Data...3 Outputs & Connection... Dimensions...5 - Shaft with max. 10 mm diameter - 0...10 V,...20 ma, 0...5 V analog

More information

Rotary Measuring Technology

Rotary Measuring Technology SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,

More information

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e

Heavy Duty Push-pull / RS422 / speed switch. RoHS 2/22. Magnetic field proof. XXXX e Sendix H00 (shaft) The Sendix encoder H00 is an extremely rugged available in 3 versions: encoder with or without speed switch and double encoder. Thanks to the special HD-Safety-Lock construction it is

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders up to 14 bit ST / 16 bit MT Features Encoder multiturn / SSI Optical sensing method Resolution: max. singleturn 14 bit, multiturn 16 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Available

More information

Absolute encoders multiturn

Absolute encoders multiturn bsolute encoders multiturn Sendix F / F (shaft / hollow shaft) The Sendix F multiturn with patented Intelligent Scan Technology is a particularly high resolution optical encoder without gears and with

More information

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI Shaft with clamping or synchro flange Optical multiturn encoders 14 bit ST / 12 bit MT Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping or synchro flange Electronic setting of zero point Counting direction input Suitable for high positive,

More information

Rotary Measurement Technology Incremental Encoders

Rotary Measurement Technology Incremental Encoders -20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT

Absolute encoders - SSI Solid shaft with clamping or synchro flange Optical multiturn encoders 18 bit ST / 12 bit MT Features High resolution encoder multiturn / SSI Optical sensing method Resolution: singleturn 18 bit, multiturn 12 bit Electronic setting of zero point Counting direction input Available with additional

More information

Absolute encoders - SSI

Absolute encoders - SSI with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics

More information

Rotary Position Technology Incremental Encoders

Rotary Position Technology Incremental Encoders -40 to 80 C Temperature Shock/vibration resistant Short-circuit protected Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection

More information

Standard EtherNet / IP. RoHS IP65. High shaft load capacity. High protection level

Standard EtherNet / IP. RoHS IP65. High shaft load capacity. High protection level bsolute encoders Sendix F / F (shaft / hollow shaft) The Sendix F with patented Intelligent Scan Technology is a particularly high resolution optical encoder without gears and with 00 percent magnetic

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size ø58 mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536,

More information

Incremental encoders With blind or through hollow shaft pulses per revolution programmable

Incremental encoders With blind or through hollow shaft pulses per revolution programmable Features Size mm Precise optical sensing Output signal level programmable (TTL or HTL) Blind or through hollow shaft, ø8 15 mm Connection axial, radial or tangential Pulses per revolution 1...65536, programmable

More information

Rotary Measuring Technology

Rotary Measuring Technology Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:

More information

RoHS. High shaft load capacity. Shock / vibration resistant

RoHS. High shaft load capacity. Shock / vibration resistant bsolute encoders Sendix F / F (shaft / hollow shaft) The Sendix F is a particularly high resolution optical encoder without gears and with 00 percent magnetic insensitivity. bits total resolution, shaft

More information

Absolute encoders - singleturn

Absolute encoders - singleturn The singleturn encoders and with PROFINT interface and sensor technology are ideal for use in all applications with a PROFINT interface. The encoder supports the IRT mode and is therefore ideal for realtime

More information

Linear measuring technology

Linear measuring technology or analogue sensor These draw wire mechanics D135 can be used up to a measuring length of 425 metres This draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or

More information

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI

TECHNICAL DATASHEET Absolute Encoder AC 58 - BiSS / SSI Compact design: 50 mm length for single or multiturn Aids for start up and operation: diagnostic LED, preset key with optical response, status information Use of sine/ cosine signals for fast control task

More information

Standard SinCos. Shock / vibration resistant. Magnetic field proof. Flexible. . XXXX e

Standard SinCos. Shock / vibration resistant. Magnetic field proof. Flexible. . XXXX e sine wave output, SI/Pe, optical Sendix SI 8S / 8S (shaft / hollow shaft) The incremental encoders 8S and 8S of the Sendix SI family are suited for use in safety-related applications up to SI according

More information

Encoder - Absolut 2RMHF-SSI

Encoder - Absolut 2RMHF-SSI Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical

More information

Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT

Absolute encoders - analog Blind hollow shaft ø12 mm Magnetic single- or multiturn encoders 12 bit ST / 16 bit MT Blind hollow shaft ø mm Magnetic single- or multiturn encoders bit ST / bit MT BMSH 8, BMMH 8 analog - MAGRES Features Encoder single- or multiturn / analog Magnetic sensing Resolution: singleturn bit,

More information

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800

NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800 NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:

More information

TECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI

TECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI Overall length: 36 mm For equipment engineering and industry Up to 22 Bit Resolution Singleturn + 12 Bit Multiturn Solid or hollow shaft version available +100 C operating temperature 10,000 rpm (continuous)

More information

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution

Incremental encoders Blind or through hollow shaft ø12 mm pulses per revolution Blind or through hollow shaft ø mm...5 pulses per revolution Features Encoder with blind or through hollow shaft ø mm Optical sensing method Max. 5 pulses per revolution Small profile depth Versatile mounting

More information

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B

Technical data. General specifications. Linearity error ± 0.1 Electrical specifications Operating voltage U B Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Incremental Encoder Model: FOI58

Incremental Encoder Model: FOI58 Incremental Encoder Model: FI58 Document no. FI 188 BE Date: 1.01.201 Robust mechanical construction, high vibration and shock resistance 1 to 16,8 pulses/ revolution perating temperature - 0 C to + 85

More information

Incremental EX and Stainless Steel Encoders

Incremental EX and Stainless Steel Encoders Incremental EX and Stainless Steel Encoders RX 70-TI / RX 71-TI (Stainless) RI 59 explosion-proof according to EX II 2 G/D EEX d IIC T6/T4 highest operating safety applications e.g. lacquering lines, surface

More information

Magnetic absolute rotary encoder GEL 235 Singleturn, Multiturn up to 28 bits (SSI)

Magnetic absolute rotary encoder GEL 235 Singleturn, Multiturn up to 28 bits (SSI) Magnetic absolute rotary encoder GEL 25 Singleturn, Multiturn up to 28 bits (SSI) Technical information version 09.06 Unique Nonius-evaluation Measuring principle: magnetic, high resolution Evaluation:

More information

Multiturn absolute encoder

Multiturn absolute encoder SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Data transfer up to 2 MBaud Optically isolated RS 422 interface Recessed

More information

Standard SinCos. Magnetic field proof. Shock / vibration resistant. Flexible. XXXX e

Standard SinCos. Magnetic field proof. Shock / vibration resistant. Flexible. XXXX e Sine wave output, SIL/PLd, optical Sendix SIL 58FS / 58FS (Shaft / Hollow shaft) The incremental encoders 58FS and 58FS of the Sendix SIL family are suited for use in safety-related applications up to

More information

Express Delivery. Axial. Connection

Express Delivery. Axial. Connection HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN

More information

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60B-S4PA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60-S4P032768 FS/FM60 SSI FS60-S4P032768 FS/FM60 SSI C D E F Ordering information Type Part no. FS60-S4P032768 1037483 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Encoder WDGI 58E.

Encoder WDGI 58E. Encoder WDGI E www.wachendorffautomation.com/wdgie Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

TECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI

TECHNICAL DATASHEET Absolute Encoder AC 36 - BiSS / SSI Overall length: 36 mm For equipment engineering and industry Up to 17 Bit Resolution Singleturn + 12 Bit Multiturn Solid shaft 6 mm (Hollow shaft version: AD 36) +100 C operating temperature 10,000 rpm

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10 Model Number SYNCHRON SERIELLES INTERFACE Features Recessed hollow shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset

More information

Product Overview. Rotary Encoders with Optimized Scanning

Product Overview. Rotary Encoders with Optimized Scanning Product Overview Rotary Encoders with Optimized Scanning November 2006 Rotary encoders for electrical drives are subject to high requirements: they are expected to function reliably and provide dependable

More information

Multiturn absolute encoder

Multiturn absolute encoder 0102 Model Number SYNCHRON SERIELLES INTERFACE Features Up to 30 Bit multiturn ATEX approval IECEx approval Flameproof enclosure Removable connection cap Galvanically isolated RS 22 interface Description

More information

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60E-S1AA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS FS0E-S0009 FS/FM0 SSI SOLUTE ENCODERS C D E F Ordering information Type Part no. FS0E-S0009 0 Other models and accessories www.sick.com/fs_fm0_ssi

More information

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI

DATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER SSI Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for

More information

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.

IXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6. IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10

Technical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 700 a at 40 C Mission Time (T M ) L 10 Model Number SYNCHRON SERIELLES INTERFACE Features Solid shaft SSI interface Up to Bit multiturn Free of wear magnetic sampling High resolution and accuracy Additionally push buttons for preset function

More information

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60A-BJPA AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS0-JP FS/FM0 SSI FS0-JP FS/FM0 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FS0-JP 09 Other models and accessories www.sick.com/fs_fm0_ssi Illustration may

More information

RoHS. Versatile. X d. XXXX a. XXXX e. c Output circuit depends on the encoder used. d Type of connection depends on the encoder used

RoHS. Versatile. X d. XXXX a. XXXX e. c Output circuit depends on the encoder used. d Type of connection depends on the encoder used These draw wire mechanics D135 can be used up to a measuring length of 425 meters This draw wire mechanics may be combined with the proven Kübler Sendix encoders with incremental or absolute interface,

More information

Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v

Technical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are

More information

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85

Electrical data Units FVS 58, FHS 58. Operating voltage (PELV) [VDC] Current consumption at 24 VDC [ma] 85 Parallel Singleturn bsolute Value Encoder Features 13-bit Singleturn High code change frequency Inputs for: - Selection of counting direction - Buffer memory (LTCH) - Multiplex operation (TRISTTE) Short-circuit

More information

Absolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT

Absolute encoders - SSI EX approval ATEX EEx d IIC T6 Optical single and multiturn encoders 14 bit ST / 12 bit MT Features Encoder single- or multiturn / SSI / ATEX Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Clamping flange with shaft ø10 mm Explosion protection per EEx d IIC T6 Area of application:

More information

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS

Online data sheet. ACM60B-S1KE13x06 ACM60 ABSOLUTE ENCODERS Online data sheet ACM60B-S1KE1x06 ACM60 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number of revolutions Ordering information

More information

Material: Weight: Shaft Loads:

Material: Weight: Shaft Loads: Absolute Encoder Type SCA36NA-SSI Absolute Encoder - Ø 36 mm Shaft - Ø 6 mm Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction Enclosure Rating

More information

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFM60B-S4PC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FM60-S4PC032768 FS/FM60 SSI C D E F H I J K L M N O P Q R S T Ordering information Type Part no. FM60-S4PC032768 1037504 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

Technical data. General specifications. Measurement range min max. 360

Technical data. General specifications. Measurement range min max. 360 Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800

NOVOHALL Rotary Sensor non-contacting. Series RSC-2800 NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection

More information

Encoder WDGI 58H.

Encoder WDGI 58H. Encoder WDGI H www.wachendorffautomation.com/wdgih Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Rotary Position Technology

Rotary Position Technology Magnetic Rings LM-2 / RMT-2 High rotational speed IP High IP Shock/vibration resistant Reverse polarity protection Robust Increased ability to withstand vibrations and rough installation: Eliminates machine

More information

Multiturn absolute encoder

Multiturn absolute encoder SYNCHRON SERIELLES INTERFACE Multiturn absolute encoder Release date: 2016-07-12 16:14 Date of issue: 2016-07-12 t4917_eng.xml Model Number Features Industrial standard housing Ø58 mm 0 Bit multiturn Data

More information

Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0

Technical data. General specifications V DC No-load supply current I 0. typ. 50 ma Power consumption P 0 Model Number SYNCHRON SERIELLES INTERFACE Cable pull rotary encoder with SSI interface Features Solid yet lightweight plastic construction Compact, slim design (the shaft of the mounted rotary encoder

More information

Encoder WDG 58H.

Encoder WDG 58H. Encoder WDG H www.wachendorffautomation.com/wdgh Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS

Online data sheet ACM36-L1K0-K01 ACS/ACM36 ABSOLUTE ENCODERS Online data sheet ACM36-L1K0-K01 ACS/ACM36 ACM36-L1K0-K01 ACS/ACM36 A B C D E F H I J K L M N O P Q R S T Illustration may differ Detailed technical data Performance Number of steps per revolution Number

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Encoder WDG 100H.

Encoder WDG 100H. Encoder WDG 00H www.wachendorffautomation.com/wdg00h Wachendorff utomation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions

More information

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental

NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional

More information

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet

Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING

More information

Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000

Features & Benefits 360, 512, 720, 1000, 1024, 1440, 1800, 2000, 2048, 2880, 3000, 3600, 4000, 4096, 5000, 5120, 6000, 7200, 8000, 8192, 9000, 10000 CP-800/900 Series Size-25 Housed Rotary Optical Encoders Solid or hollow shaft, incremental, sine/cosine, or absolute format Allied Motion s CP800/900 series are size-25 (2.5 in. (63.5mm)) rotary optical

More information

Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI

Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI Magnetic absolute multi-turn hollow shaft encoder BMMH MAGRES SSI features robust multi-turn encoder up to - 2 bit single-turn resolution - 3 bit multi-turn resolution miniature housing zero point programmable

More information

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications

Product Information. RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications Product Information RCN 2000 RCN 5000 RCN 8000 Absolute Angle Encoders for Safety-Related Applications September 2013 RCN 2000 series Absolute angle encoders for safety-related applications Safe absolute

More information

Data Sheet AS25/AS50. Absolute / Incremental Singleturn Encoder 18 Bit

Data Sheet AS25/AS50. Absolute / Incremental Singleturn Encoder 18 Bit Absolute / Incremental Singleturn Encoder 18 Bit PWB encoders GmbH Am Goldberg 2 D-99817 Eisenach Germany Phone: +49 3691 72580-0 Fax: +49 3691 72580-29 info@pwb-encoders.com info@pwb-encoders.com / Description

More information

ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE

ABSOLUTE ROTARY ENCODER SSI PROGRAMMABLE Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions

More information

Magnetic absolute single-turn encoder BMSH MAGRES parallel

Magnetic absolute single-turn encoder BMSH MAGRES parallel Magnetic absolute single-turn encoder BMSH MAGRES parallel features robust single-turn encoder up to 9 bit parallel interface miniature housing zero-point programmable general data voltage supply 5 VDC

More information

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile.

Rotary encoders. absolute / optical. Bright ideas in the measurement of rotation: robust, precise, versatile. Rotary encoders absolute / optical right ideas in the measurement of rotation: robust, precise, versatile. Absolute encoder WK02/1 Hollow shaft WK02/1 - robust single-turn angle encoder with through hollow

More information

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track

Product Information. ERN 1085 Incremental Rotary Encoder with Z1 Track Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation

More information

ABSOLUTE ROTARY ENCODER SSI

ABSOLUTE ROTARY ENCODER SSI Main Features - Compact and heavy-duty industrial model - Interface: Synchronous -serial (RS 422) - Housing: 58 mm - Shaft: 6 or 10 mm - Hollow shaft 12 mm - Blind hollow shaft 15 mm - Max. 65,56 steps

More information

Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI

Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI Oil & Gas / Heavy Industry Type 2REX-A-NA-SSI EN 60079 Electrical Specifications Encoder Type: Singleturn Resolution: Number of Revolutions: Supply Voltage: Typical Current Consumption: Accuracy: ± 0,35ᴼ

More information

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution

Incremental encoders Blind hollow shaft or cone shaft pulses per revolution Features TTL output driver for cable length up to 550 m Very high resistance to shock and vibrations Hybrid bearing for extended service life Shaft insulation up to.8 kv Large terminal box, turn by 80

More information

Positioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP

Positioning drives DC motor, brushless Absolute multiturn position detection, Profibus-DP Features Positioning drive with worm gear bevel geared shaft Profibus-DP Brushless DC motor Absolute multiturn position detection Nominal power output 80 W inputs programmable Separate communication and

More information

Online data sheet AFS60E-S4AC AFS/AFM60 SSI ABSOLUTE ENCODERS

Online data sheet AFS60E-S4AC AFS/AFM60 SSI ABSOLUTE ENCODERS Online data sheet FS60E-S4000256 FS/FM60 SSI FS60E-S4000256 FS/FM60 SSI D E F Ordering information Type Part no. FS60E-S4000256 1052119 Other models and accessories www.sick.com/fs_fm60_ssi Illustration

More information

847H. Description. Features. Specifications

847H. Description. Features. Specifications 847H Bulletin 847H High Performance Industrial Incremental Encoders provide code disk resolutions of up to 65536 pulses per revolution at a signal frequency response of 820 khz. The 847H can provide 65536

More information

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:

Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads: Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:

More information

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL

ABSOLUTE ROTARY ENCODER MULTI-TURN BIT PARALLEL Main Features - Compact and heavy-duty industrial model - Interface: Bit-parallel, push pull ΠShort circuit proof - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096

More information

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG

ABSOLUTE MAGNETIC ROTARY ENCODER ANALOG High-resolution absolute encoder based on magnetic technology. Singleturn sensing based on 360 Hall effect technology. Multiturn sensing based on magnetic pulse counter. No batteries used. Main Features

More information

POSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet

POSIROT. PRAS3EX Magnetic Angle Sensor. Magnetic Angle Sensors (Dust-Ex-proof) Datasheet Magnetic Angle Sensors (Dust-Ex-proof) Magnetic Angle Sensor Datasheet Copyright ASM GmbH Am Bleichbach 18-24 85452 Moosinning Germany The information presented in this data sheet does not form part of

More information

Measurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( )

Measurement range. Resolution 0.03 % ( ); 0.1 % ( ) Repeatability ±0.03 % ( ); ±0.1 % ( ) PRAS5 Magnetic Angle Sensor with Analog Output Magnetic angle sensor 0-360 in a flat housing with 66 mm resp. 68.2 mm dia. Measurement range 0-360 Protection class IP67 / IP69K, optional IP68* Analog output

More information