PD30ETD10xxSA. Photoelectrics, Diffuse reflective. Main features. Description

Transcription

1 Photoelectrics, Diffuse reflective Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments. They are designed for use in environments where high-pressure cleaning, cleaning agents and disinfectants are used on a daily basis. The strong stainless steel (ISI316L together with high-quality plastic materials like PEEK, PPSU, and PES sealings of FKM ensure a safe and excellent mechanical resistance. The compact sensor design is ideally suited to confined spaces. Miniature sensor range Sensing range: 1.0 m Sensitivity adjustment by potentiometer Modulated, red light 617 nm Supply voltage: 10 to 30 VD Output: 100 m, NPN or PNP preset Make and break switching function LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients able and plug versions Excellent EM performance The visible red light makes alignment very easy Power supply necessary only on one side of the application Ecolab Main functions Detects presence or absence of objects by detecting reflected light energy from the object Fig. 1 able Fig. 2 Plug Fig. 3 ack Element omponent Function Potentiometer djustment 2 LEDs Green LED: Power ON / Signal stability.yellow LED: Output 2 M3 Fixing holes for sensor mounting 1

2 Sensing Detection Rated operating distance (S n Sensitivity adjustment 1.0 mm Reference target, white paper with 90 % reflectivity, Size 200x200 mm 0.1 m m Single-turn potentiometer 210 Electrical adjustment 240 Mechanical adjustment lind zone 1.0 S n max White object 90% reflection Hysteresis 5%... 20% Light source 617 nm Red Light type Red modulated Detection angle ± mm (half sensing distance Light spot size 46 mm (half sensing distance Emitter beam angle ± mm (half sensing distance ccuracy Temperature drift 0.2%/º Detection diagram D 0, ,9 15,7 23,6 31,5 39,4 47,2 55,1 2,0 1,6 1,2 0,8 0,4 0,0-0,4-0,8-1,2 1,6-2, E X F Y Detection width (mm E Sensor Sensing range (mm F Object Detection width (inches D Sensing range (inches 2

3 Excess gain 0,0 0,4 3,9 39,4 393, , ,00 10,00 1 1, Excess gain Distance (mm Distance (inches 3

4 Features Power Supply Rated operational voltage (U VD (ripple included Ripple (U rpp 10% No load supply current (I o 25 U max Power-ON delay (t v 30 ms Outputs Output functions NPN or PNP by sensor type Open collector Output switching function N.O. and N.. Output current < 100 m ontinuous(i e nf load Short-time (I Minimum operational current (I m 0.5 m OFF-state current(i r 100 μ Voltage drop (U d 2 (I e max. Protection Short circuit, reverse polarity and transients ontrol of resistive loads and Utilization category D-12 solid-state loads with optical isolation D-13 ontrol of electromagnets Operation diagram Tv = Power-ON delay power supply Target (Object reak output (N.. Make output (N.O. ON Present ON ON Tv Tv Response times Operating frequency (f Response times 1000 Hz 0.5 ms OFF-ON (t ON 0.5 ms ON-OFF (t ON 4

5 Indication Green LED Yellow LED Power Output ON OFF ON OFF (stable* OFF OFF ON or OFF OFF OFF ON ON ON ON ON ON ON (stable* *See signal stability curve Signal stability indication Y X Green LED ON 1 Operation level x 1.10 Yellow LED OFF Operation level X Time 2 Operation level x 0.90 Y Excess gain Environmental ( F Operating, able version 1 mbient temperature ( F Storage Plug version ( F Storage mbient light K Vibration Hz, 1.0 mm/15 g EN Shock 30 g n / 11ms, 6 pos, 6 neg per axis EN Drop test 2 x 1 m and 100 x 0.5 m EN Rated insulation voltage (U i 50 VD Dielectric insulation voltage 500 V rms 50/60 Hz for 1 min. Rated impulse withstand voltage 1 kv 1.2/50 µs Pollution degree 3 EN Overvoltage category III IE60664; EN Degree of protection 2m and 20 h IE60539; EN IP69K DIN NEM Enclosure Types 1, 2, 4, 4X, 5, 6, 6P NEM 250 mbient humidity range 35%... 95% Operating 2 35%... 95% Storage 2 5

6 1 Do not bend the cable in temperatures below With no icing or condensation EM Electrostatic discharge immunity test Radiated radio-frequency electromagnetic field immunity test (80 MHz... 1 GHz and 1..4 GHz... 2 GHz Electrical fast transient/urst immunity test onducted disturbances induced by radio-frequency fields immunity test (150 khz MHz Power frequency magnetic field immunity test ± 8 air discharge or ± 4 contact discharge IE V/m IE kv / 5 khz using the capacitive coupling clamp IE Vrms IE /m 38 µt IE

7 Mechanics/electronics onnection able Plug 2 m, 4-wire 4 x 0.14 mm 2, Ø = 3.3 mm, PV, lack M8, 4-pin, male Wiring 1N 2WH 4K 3U Fig. 4 NPN 1N 4K 2WH 3U Fig. 5 PNP olour code N rown WH White K lack U lue Housing ody Stainless steel, ISI316L Front glass PPSU, Red Trimmer shaft PEEK, Light grey Indication PES, Transparent Polyethersulfone Sealing FKM Fluoroelastomer able gland FKM Fluoroelastomer Dimensions 11 x 31.5 x 21 mm Weight 100 g able version 65 g Plug version 7

8 Dimensions ø2.2 Fig. 6 able ø2.2 Fig. 7 Plug

9 ompatibility and conformity pprovals and markings General reference Sensor designed according to EN MTTF d (+104 F ISO , SN E-marking pprovals Other pprovals (UL Topax 56, Topaz 1, Topaz MD3, Topaz L1, Topactiv OKTO, P3-hypochloran 9

10 References Product selection key PD30ETD10 S Enter the code option instead of ode Option Description P - Photoelectric sensor D - Rectangular housing 30 - Length of housing E - Stainless steel T - Top trimmer D - Diffuse reflective 10 - Distance [dm] N NPN P PNP - Output: N.O. and N.. - able, 2 m M5 onnector M8 S - Sensitivity adjustment Type selection onnection able Plug Output NPN PNP NPN PNP ode PD30ETD10NS PD30ETD10PS PD30ETD10NM5S PD30ETD10PM5S 10

11 Delivery contents and accessories Delivery contents Photoelectric switch: PD30ETD10 Screwdriver Packaging: arton box Mounting bracket: PD30-M1 ccessories Mounting bracket: PD30-M2 to be purchased separately onnector type: O..54NF... series to be purchased separately ER.. Reflectors to be purchased separately OPYRIGHT 2016 ontent subject to change. Download the PDF: 11