FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
|
|
- Jonathan Hensley
- 6 years ago
- Views:
Transcription
1 Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive O-ring on parallel threads. Internal and external hexagons on straight fittings. Immediate quality sealing using silicone free U-packing. Technical data Medium Compressed air Operating pressure 70mm Hg vacuum, up to 10 bar Temperature 0 to 60 C Medium compressed air Tube sizes Standard sizes: 4, 6, 8, 10, 12, 16 mm Miniature sizes: 3, 4, and 6 mm Thread sizes Standard sizes: M, M6, 1/8, 1/4, 3/8 and 1/2 inch, ISO G and ISO R Miniature sizes: M3, M and 1/8 inch ISO R Tube types Nylon 11 or 12 Polyurethane 8, 9 or 98 durometer Materials Body: PBT Seals: NBR (silicone free) u-packing and O-rings Threaded bodies: nickel plated brass Release sleeve and backing ring: POM Grab-ring: stainless steel Collar: nickel plated zinc Thread sealant: Chemiseal G Method of assembly Ensure that the end is cut square and is free from burrs. 2. Push the through the release ring button and grab ring into the fitting. 1 Impact resistant PBT body in black for Pneufit C and light gray for Pneufit M. 4 Silicon free U-packing provides leak tight seal under side loading. 3. Push the firmly through the O ring until it bottoms on the stop, then pull back. 2 Release buttons are red for metric, grey for inch, and light grey oval for Pneufit M. 3 Stainless steel grab ring with special design to retain softer and provide easy releasability. Stem seal provides leak tight 360 swivel connection. 6 Nickel plated brass threads and notches on hex to signify NPT. 7 Pre-applied thread sealant on tapered threads and recessed captive O-ring on parallel threads. 4. To disconnect, push the into the fitting, hold down the release button and withdraw the. FIT-29
2 Pneufit C composite and Pneufit M fittings Ø 3 to 16 mm (external + internal hex) Thread M C M6 C /8" R C /4" R C /8" G C /4" G C M C M6 C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /4" G C /8" G C /2" G C /8" R C /2" R C /8" G C /2" G C (internal hex only) Thread M C022A040 1/8" R C012A0418 1/4" R C012A0428 3/8" R C012A0438 M C022A060 M6 C022A0606 1/8" R C012A0618 1/4" R C012A0628 3/8" R C012A0638 1/4" R C012A0828 3/8" R C012A0838 1/8" R C012A1018 1/4" R C012A1028 3/8" R C012A1038 1/2" R C012A1048 1/8" R C012A1218 1/4" R C012A1228 3/8" R C012A1238 1/2" R C012A1248 (female thread) Thread M C /8" G C /4" G C /8" G C /4" G C /8" G C /8" G C /4" G C /8" G C /2" G C /8" G C /4" G C /8" G C /2" G C /8" G C /2" G C FIT-30
3 Ø 3 to 16 mm Straight Adaptor (female bulkhead) Thread 1/8" G C /4" G C /8" G C /8" G C /4" G C /8" G C /8" G C /4" G C /8" G C /4" G C /8" G C /2" G C /4" G C /8" G C /2" G C Swivel elbow Thread M C M6 C /8" R C /4" R C /8" R C /8" G C /4" G C /8" G C M C M6 C /8" R C /4" G C /8" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /4" G C /8" G C /2" G C /8" R C /2" R C /8" G C /2" G C Swivel elbow adapter (extended) Thread M C M6 C /8" R C /4" R C /8" R C M C M6 C /8" R C /4" R C /8" R C /2" R C /8" R C /4" R C /8" R C /2" R C /8" R C /4" R C /8" R C /2" R C /8" R C /4" R C /8" R C /2" R C /8" R C /2" R C Swivel elbow adapter (female) Thread M C M6 C /8" R C /4" R C M C M6 C /8" R C /4" R C /8" R C /8" R C /4" R C /8" R C /4" R C /8" R C /2" R C /4" R C /8" R C /2" R C FIT-31
4 Pneufit C composite and Pneufit M fittings Ø mm Swivel Y adapter Thread M C M6 C /8" R C /4" R C /8" R C /8" G C /4" G C /8" G C M C M6 C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /4" G C /8" G C /2" G C Swivel tee adapter Thread M C M6 C /8" R C /4" R C /8" R C /8" G C /4" G C /8" G C M C M6 C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /4" G C /8" G C /2" G C /8" R C /2" R C /8" G C /8" G C /2" G C FIT-32
5 Ø 3 to 16 mm Swivel side tee adapter Thread M C M6 C /8" R C /4" R C /8" R C /8" G C /4" G C /8" G C M C M6 C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /8" G C /4" G C /8" G C /2" G C /8" R C /4" R C /8" R C /2" R C /4" G C /8" G C /2" G C Swivel tee adapter Thread M C026C040 M6 C026C0406 1/8" R C016C0418 1/4" R C016C0428 M C026C060 M6 C026C0606 1/8" R C016C0618 1/4" R C016C0628 3/8" R C016C0638 1/8" R C016C0818 1/4" R C016C0828 3/8" R C016C0838 1/2" R C016C0848 1/8" R C016C1018 1/4" R C016C1028 3/8" R C016C1038 1/2" R C016C1048 1/4" R C016C1228 3/8" R C016C1238 1/2" R C016C1248 Banjo Thread M C0A1040 M6 C0A /8" G C0A /4" G C0A10428 M C0A1060 M6 C0A /8" G C0A /4" G C0A /8" G C0A /8" G C0A /4" G C0A /8" G C0A /2" G C0A /4" G C0A /8" G C0A /2" G C0A /8" G C0A /2" G C0A11248 Banjo with top port Thread M C0D1040 1/8" R C0E /4" R C0F10428 M C0D1060 1/8" R C0E /4" R C0F /8" R C0G /8" R C0E /4" R C0F /8" R C0G /4" R C0F /8" R C0G /8" R C0G11238 FIT-33
6 Pneufit C composite and Pneufit M fittings Ø 3 to 16 mm Banjo flow control (regulating out) Thread M C0K1040 1/8" R C0TA /4" R C0TA /8" G C0K /4" G C0K10428 M C0K1060 1/8" R C0TA /4" R C0TA /8" R C0TA /8" G C0K /4" G C0K /8" G C0K /8" R C0TA /4" R C0TA /8" R C0TA /2" R C0TA /8" G C0K /4" G C0K /8" G C0K /2" G C0K /4" R C0TA /8" R C0TA /2" R C0TA /4" G C0K /8" G C0K /2" G C0K /4" R C0TA /8" R C0TA /2" R C0TA /4" G C0K /8" G C0K /2" G C0K11248 Bulkhead union C C C C C Stem union C C C C C C Plug C C C C C C Cap In line flow control C00GE0400 C00GE0600 C00GE0800 C00GE1000 C00GE C C C C C C Straight union C C C C C C Union elbow C C C C C C FIT-34
7 Ø 3 to 16 mm Stem elbow C C C C C C Union Y C C C C C Union tee Stem Y 1 C C C C C C C C C C C Stem tee Union cross C C C C C C C C C C Stem side tee Straight union (unequal) C C C C C C C C C C FIT-3
8 Pneufit C composite and Pneufit M fittings Ø 3 to 16 mm Stem Reducer (stem/) 6 - C C C C C C C C Stem Side Tee (unequal) 6 - C C C C Stem Expander (stem/) 6 - C C Stem Tee (unequal) 6 - C C C C Stem Union (unequal) 6 - C C C C C Union Y (unequal) 6 - C C C C Union Tee (unequal) 6 - C006A C006A C006A C006A C006A C006A C006A1612 Stem Y (unequal) 6 - C C C C FIT-36
9 Ø 3 to 16 mm MINIATURE PNEUFIT M (external + internal hex) Thread 3mm M3 M mm M M mm M6 M M3 M M M M6 M /8" M M M M6 M /8" M Swivel Elbow Adapter Thread 3mm M3 M mm M M mm M6 M M3 M M M M6 M /8" M M M M6 M /8" M (internal hex only) Thread 3mm M3 M022A0303 3mm M M022A030 3mm M6 M022A0306 M3 M022A0403 M M022A040 M6 M022A0406 1/8" M012A0418 M M022A060 M6 M022A0606 1/8" M012A0618 Swivel Tee Adapter Thread 3mm M3 M mm M M M3 M M M M6 M /8" M M M /8" M (female thread) Thread 3mm M M mm M6 M M3 M M M M6 M /8" M M6 M /8" M M M Swivel Side Tee Adapter Thread 3mm M3 M mm M M mm M6 M M3 M M M M6 M M M M6 M FIT-37
10 Pneufit C composite and Pneufit M fittings Ø 3 to 16 mm Straight Union 3mm M M M Straight Union (unequal) -3mm M mm M M Union Elbow 3mm M M M Stem Reducer (stem/) Thread 3mm M C0K1030 M C0K1040 M C0K1060 Union Tee 3mm M M M FIT-38
11 Ø 3 to 16 mm PNEUFIT C MANIFOLDS Male Manifold Thread 6-1/8" R C01D /4" R C01D /4" R C01D /8" R C01D30838 Thread to thread 3/2 Shut off valves ISO R thread to thread R 1/8" C01GG1818 R 1/4" C01GG2828 R 3/8" C01GG3838 R 1/2" C01GG4848 Manifold Union 6 - C00D C00D C00D C00D C00D31008 Tube to Tube to (mm) 6 C00GF C00GF C00GF C00GF1200 Stem Manifold 6 - C00J C00J C00J C00J31008 Tube to thread Inlet Outlet ISO R (mm) thread 6 R 1/8 C01GH R 1/4 C01GH R 3/8 C01GH R 1/8 C01GH R 1/4 C01GH R 3/8 C01GH R 1/4 C01GH R 3/8 C01GH R 1/2 C01GH R 1/4 C01GH R 3/8 C01GH R 1/2 C01GH 1248 Thread to Inlet Outlet ISO R thread (mm) R 1/8 6 C01GJ 0618 R 1/8 8 C01GJ 0818 R 1/4 6 C01GJ 0628 R 1/4 8 C01GJ 0828 R 1/4 10 C01GJ 1028 R 1/4 12 C01GJ 1228 R 3/8 6 C01GJ 0638 R 3/8 8 C01GJ 0838 R 3/8 10 C01GJ 1038 R 3/8 12 C01GJ 1238 R 1/2 10 C01GJ 1048 R 1/2" 12 C01GJ 1248 FIT-39
FITTINGS ADVANTAGE AND EXPERTISE IN YOUR INDUSTRY
PNEUFITDADVANTAGE INCH RANGE Acetal push-in fittings Comprehensive size and range from 5/32" to 1/2" Approved for use in pneumatics, medical, food and drinks applications FITTINGS ADVANTAGE AND EXPERTISE
More informationtubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
More informationBrass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
More informationHydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationFORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE"
FORGED BRASS & STEEL FITTINGS "NPT" and "NPT 45 SAE" BRASS FLARED TUBE FITTINGS "STANDARD FLARE SAE 45 " FITTING CONNECTIONS RANGE Standard MALE FLARE SAE 45 Standard FEMALE FLARE SAE 45 Standard MPT (male
More informationSINGLE SHUT OFF QUICK RELEASE COUPLINGS
233 Series C = 0,844 v 0 200 400 600 Compact robust construction High flow, low drop Wide range of connections C = 0,844 v 0 3 6 9 12 15 18 21 5 = 20mm 2 560 l/min ( inlet, drop bar) Rectus 21, Rectus
More informationPARTS LIST FOR MODEL 7000 SERIES - 17/46
ITEM PARTS LIST FOR MODEL 7000 SERIES - 17/46 1 Rotor 3 Housing 1 4 End Plate 6 Drive End Cover 1 7 Free End Cover 1 8 Timing Gear Set 1 9 Bearing, Drive End 10 Bearing, Free End 1 Lip Seal, Viton 4 13
More informationONASSIS SHOWER SET INSTALLATION
SKU(s): 925939 BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for any damage to the plumbing, floor,
More informationREPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationGP-SD GENIE PROBE SMALL DIAMETER
For GENIE PROBE SMALL DIAMETER Installation and Operation Instructions 2 for s Locking Mechanism (if supplied) Set Screws Backed Out To ensure that the is Locking never accidentally loosened or Mechanism
More informationCaution: Installation and Operation Instructions. Locking Mechanism (if supplied) Set Screws Backed Out. Mounting Orientation
Genie Probe Regulator (GPR)/ Genie Probe (GP2)/ Genie Probe for Composite Sampler (CSA)/ And (Model H) Installation and Operation Instructions Caution: Not designed for external fire. Prior to use in a
More informationLATTIMORE SHOWER SET INSTALLATION
SKU(s): 931419 LATTIMORE SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability
More informationEXIRA SHOWER SET INSTALLATION
SKU(s): 925470 EXIRA SHOWER SET INSTALLATION BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationINSTALLATION GUIDELINES
STYLE No. DSXS20 with 8 Shower Head and Metal Cross Handles STYLE No. DSXS2C System with Metal Cross Handles STYLE No. DSXS30 with 8 Shower Head, Metal Lever and Cross Handle STYLE No. DSXS3C System with
More informationHYDRAULIC STEEL BRAKE LINES
36 B9 MISCELANEOUS HYDRAULIC STEEL BRAKE LINES DOMESTIC CAR AND TRUCK STANDARD INVERTED FLARE BOTH ENDS HYDRAULI STEEL BRAKE LINE B9-HL3008 3/16" 8" 10 B9-HL3012 3/16" 12" 10 B9-HL3020 3/16" 20" 10 B9-HL3030
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationRiser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8
Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18 Manual 40100X35-8 3 2 4 Access covers with bolts supplied with Interceptor 1 5 14 6 11 15 Sampling Port/Cleanout cap supplied with Interceptor 12
More informationCALLAS THERMOSTATIC SHOWER SET
SKU(s): 925945 CALLAS THERMOSTATIC SHOWER SET BEFORE YOU BEGIN We recommend consulting a professional if you are unfamiliar with installing plumbing fixtures. Signature Hardware accepts no liability for
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationServiceable Parts List RAIL MOUNT REV #WFS_01/16
Serviceable Parts List RAIL MOUNT REV #WFS_01/16 Table of Contents Using This Document...3 Introduction...3 Parts Ordering...3 Safety Notice...3 Total Assemblies and Installation Kits...4 Parts Lists...4
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationGeneral Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationAUTOMATIC ACCESS VALVES & FITTINGS
AUTOMATIC ACCESS VALVES & FITTINGS PIERCING VALVES SPLIT AIR CONDITIONER VALVE SACV2-04 2 WAY VALVE: 1 /4" inlet x 1 /4" flare outlet SACV3-04 3 WAY VALVE: 1 /4" inlet x 1 /4" flare outlet with 1 /4" access
More informationPosiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/4" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationPosiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
More informationEngineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
More informationMade in USA. Valves VALVES FOR INSTRUMENTATION & PROCESS SYSTEMS
Made in USA Valves VALVES FOR INSTRUMENTATION & PROESS SYSTEMS SSP Fittings orp. Table of ontents FloLok Product Overview... 3 FloLok Selection Guide... 11 Two-Way Ball Valves... 12 Three-Way Ball Valves...
More informationAnnexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs
Product Descriptions and Codings Adaptors and Reducers The AD-U series adaptors and RD-U series reducers each comprise a metallic, hexagonal, hollow body with an external male thread and an internal female
More informationHydraulic Adapters (080201/ MS# 51820) (080202/ MS# 51815) (071502) (081602) (080203/MS# 51813)
Steel and stainless steel bite type fittings meet all design and performance requirements for hydraulic flareless tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE).
More informationPRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
More informationFUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
More informationPRICE BID T Supply of Various Brass / SS valves & fittings for unit # 1 to 4.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 9001:08, ISO 1001:0 and OHSAS 18001:07 CERTIFIED T HERMAL POWER ST AT ION, UKAI U K A I D A M 3 9 6 8 0, D I S T R I C T : T A P I Phone : 0262-233231,
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationSS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationMetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
More informationRhino r VE/CE Pneumatic Level Detect Modules. Description S S. The assembly detects two conditions during the downward movement of the follower:
Rhino r VE/CE Pneumatic Level Detect Modules Description See Figure 1. Level Detect modules use roller plunger limit switches on guide rails to monitor the distance between the bottom of the follower and
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationGRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
More informationRelated Products. Manual Valves. Application Checklist. Related Products
Flow Controls 10.2-10.10 Air-to-Air Boosters 10.11-10.12 Air Reservoirs 10.13-10.17 Manual Valves 10.18 Absorbers 10.19-10.25 Transition Plates 10.26-10.39 Application Checklist 10.40 Alignment Couplers
More informationhttps://www.indiamart.com/airservicesgroup/
+91-8048109735 Air Services Group https://www.indiamart.com/airservicesgroup/ Our company ventured in dealing and supplying of a range of Auto Drain Valve, Aluminium Piping System and many more. We are
More informationE.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST
E.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST E.C. HOPKINS LTD UNIT 1, 82 KETTLES WOOD DRIVE, WOODGATE BUSINESS PARK, WOODGATE VALLEY, BIRMINGHAM B32 3DB TEL NO. +44 (0)121 506 6095
More informationThread Identification Guide
Thread Identification Guide At Trimantec, our sales department gets a number of questions regarding technical specs for industrial parts. One of the concepts that seems to stump a lot of people is port
More informationSeries 10-ZSE30A(F)/10-ISE30A
Series 10-ZSEA(F)/10-ISEA RoHS 2-Color Display High-Precision Digital Pressure Switch Clean series For positive For vacuum/ compound Rated range ISEA 0.1 to 1 MPa How to Order 10 ISEA 01 N M 01 N01 C4H
More informationFLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
More informationB34 Series Regulator Commercial and Industrial Regulator
B34 Series Regulator Commercial and Industrial Regulator Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the B34 is particularly
More informationINSTALLER S GUIDE CAUTION BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-20N DENTAL CHAIRS BDS-0050
INSTALLER S GUIDE BDS-0050: SWING MOUNTED ASSISTANT VAC PAC FOR BEL-50 AND BEL-0N DENTAL CHAIRS Location for all the incoming utilities should be in accordance with the cabinet installation instructions.
More informationcaroma marc newson wall basin mixer
caroma marc newson wall basin mixer water efficient tapware (nominal flow rate = 5 L/min) PLUMBERS INSTALLATION INSTRUCTIONS IS1213A(07/12) Important Information Brazed connections should NOT be made directly
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Square Free Standing Floor Mount Tub Filler Model D35900900 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully
More informationINSTALLATION INSTRUCTIONS FOR WALL TUB SETS, TWO HANDLE SHOWER SETS AND WALL LAVATORY SET VALVES NUMBERED: RC & RC
P 99061 INSTALLATION INSTRUCTIONS FOR WALL TUB SETS, TWO HANDLE SHOWER SETS AND WALL LAVATORY SET VALVES NUMBERED: 8090536RC & 9090536RC 2222 Camden Court, Oak Brook, IL 60523 Telephone: 800-PHYLRICH (749-5742)
More informationOperating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
More information'Mutiny' Ozone Reactor Kit
'Mutiny' Ozone Reactor Kit Skill Level: Beginner Tools Required: Scissors or razor blade Other Materials: Teflon tape Time to Build: Approximately 1 hour not including drying time Version: 2012 spray nozzle
More informationLF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS NOT INCLUDED NOT INCLUDED MODEL: LUGARNO HAND SHOWER SET (RH-9) Restoration Hardware Hand Shower / Slide Bar Specification Diagram SHOWN WITH SHOWER SET RH-90 (NOT INCLUDED) All
More informationHT-Series Hydraulic Couplings
Interchange Data: Interchangeable to ISO16028 Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series 'A', Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Materials: Machined
More informationProfibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
More informationChiltern Model Steam Engines
Chiltern Model Steam Engines Mill Twin Cylinder Model Steam Engine v2 Assembly Instructions v1.0 Notes: 1. In overview the engine should first be assembled "dry" with no oil/lubricants, thread lock or
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC1113-XL P R O D U C T S. June Part #
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1113-XL June 013 Part #10 TABLE OF CONTENTS Description Page No. Saw Assembly (Normal Cut).... - Saw Assembly (Up-Cut)...... - Gas Engine Assembly......
More informationLockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
More information24000, 3/2 Direct solenoid actuated direct poppet valves
> > Port size: G/4... G / > > Working from 0 bar up > > Suitable for vacuum range down to, 0 - mbar l/s > > 65, Ex em, Ex d (TEX approved, see solenoid operators) > > Suited for outdoor installation Technical
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationVisual Guide. Balloons match the sections. - iii. Components & Parts Catalogue
Balloons match the sections. Visual Guide - iii - iv - Components & Parts Catalogue Table of contents 1. Frame assembly... 1 1.1. Bumper Step Furnishings (Aluminium Checker)... 3 1.2. Sliding Cover assembly...
More informationFORD METER COUPLINGS AND ACCESSORIES SECTION H. Ford Meter Coupling and Accessory Numbering System L D - NL
FORD METER COUPLINGS AND ACCESSORIES SECTION Ford Meter Coupling and Accessory Numbering System TYPE OF COUPLING OR ACCESSORY C = Straight Coupling CF = Couplings for Flanged Meters CT = Couplings for
More informationAM33 LP-P Natural Gas Conversion Manual For Outdoor Use Only
AM33 LP-P Natural Gas Conversion Manual For Outdoor Use Only 1 4 6 2 3 5 Part No. Qty Description 1 RCOZZ00339A 1 Main Burner Valve & Manifold Assembly with Valves (NG) 2 RCOZZ00340A 1 Side Burner Assembly
More informationPlumbing Part II - Hand Pump
Plumbing Part II - Hand Pump Nelson Riedel Nelson@NelsonsLocomotive.com Initial: 7/17/03 Last Revised: 06/06/2004 The hand pump located in the tender water tank is a backup pump should the axel pump fail
More informationBolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
More informationINSTALLATION GUIDELINES
IMPORTANT: To ensure this product is installed properly, you must read and follow these guidelines. The owner/user of this product must keep this information for future reference. This product must be
More informationMain Components. Pipe and Bolt Threading Machine 300/300A. Early Style. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine 00/00A Main Components Early Style 0 0 * 0 0 0 For Information on Cutters, Die Heads and Reamers SEE INDEX Ref. 0 0 Catalog 0 00 00 0 0 0 00 0 0 0 0 0 0 0 00 0 00 00 00
More informationIndex. Accessories WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Index 9.00.01 07/2010.C Accessories Mounting Kits and Cross Reference - 300, 400 Series... 9.01.01 Mounting Kits - 500, 700, 900 Series... 9.01.02 Stud Nuts & Kits... 9.02.01 Stud Nuts & Kits - ISO 03,
More informationBP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
More informationAir Chief. and Accessories. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURIN Air Chief and Accessories Customer Service: 877.963.4966 Actual Profile Chart Industrial Series 1/4"
More informationCBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, water glycol, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
More informationNELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationTNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
More informationJARVIS. Model25CL-4,5,6 Hock Cutter and Loin Dropper. 25CL--5 Front Legs and Horns. 25CL--4 Hind Legs and Horns. 25CL--6 Loins
Model25CL-4,5,6 Hock Cutter and Loin Dropper 25CL--4 Hind Legs and Horns 25CL--5 Front Legs and Horns 25CL--6 Loins EQUIPMENT SELECTION... Ordering No. TABLE OF CONTENTS... Page 25CL--4... 4025007 25CL--5...
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationBodyspray INSTALLATION INSTRUCTIONS
Bodyspray P22077 P22079 2014 KALLISTA 1 of 8 THANK YOU FOR CHOOSING KALLISTA Bodyspray We appreciate your commitment to KALLISTA quality products. Please take a moment to review this manual before you
More informationNew Product Release: October 2014 Boone Racks
New Product Release: October 2014 Boone Racks Double Fido Fountain Mounting: Surface NOTE: THESE ROUGH-IN DIMENSIONS MAY VARY ½: (13 mm) PLUS OR MINUS NOTE: All dimensions subject to manufacturing variance
More informationMTS AND MTS PR¼ 16 OUTPUT SEQUENTIAL TIMER PENTAIR CLEAN AIR SYSTEMS
MTS AND MTS PR¼ 16 OUTPUT PENTAIR CLEAN AIR SYSTEMS MTS DESCRIPTION The Model MTS sequencer has been designed to guarantee the control of diaphragm valves mounted on pulse-jet dust collector filters containing
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationThermoforming Components TOOLING TECHNOLOGY
Thermoforming Components TOOLING TECHNOLOGY TOOLING TECHNOLOGY Trim Tool Components Cone Locator Cartridges PDSP75 Male cone locator cartridge PDSP76 Female cone locator cartridge Cone locator cartridges
More informationSECTION E CONTENTS THREE WAY VALVES DESCRIPTION
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600, Threaded Bronze E-1 70-900, Solder Bronze E-2 76-600, Threaded Stainless Steel E-3 3-Way Valve Application E-4 Chromium plated ball 70-600 3-Way
More informationInstallation Instructions 3/4 Thermostatic Valve Rough-in & Trim (PL8950)
Tub & Shower PL950 Installation Instructions 3/ Thermostatic Valve Rough-in & Trim (PL950) CONTENT 0 - Valve & stop vlave specifications 03 - Face plate specifications 0 - Handle specifications 05 - Shower
More informationW1265V, W1265B, W1265CV PARTS DIAGRAM
Trail Warrior Quick Split -Ton Log Splitters Parts Breakdown W65V, W65B, W65CV PARTS DIAGRAM 37 3 30 37 5 5b 37 34 4 36 4 44 3 6 3 0 4 3 6 35 38 5 9 46 3 40 38 35 40 43 43 4 40 39 7 6 8 9 7 6 35 49 63
More informationGENERAL ASSEMBLY TCR 2000/2 1:4 DRG 1368D 10 25/01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 7.5 kg D01-AH6 REV0 REV.
REVISION HISTORY REV. DATE APPROVED 0 Part Number DRG 1368D 10 Title of Part GENERAL ASSEMBLY 1:4 Scale Designed By Drawn By Checked By Approved By Surname Adam Migala E. Crichton B. Aitken Title of Project
More informationAUTOMOTIVE FITTINGS, HOSES, LINES AND TUBING
Catalog 76 AUTOMOTIVE FITTINGS, HOSES, LINES AND TUBING THE COMPLETE STORY There s never been a more complete collection of automotive fittings assembled into one easy-to-use display. The new Big Brass
More informationPart No. Original Part No. Original MPT No. FPT No. Description. Part No. Original Part No. Original MPT No. FPT No. Description
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
More informationPressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit
Shower Only PL8900-00 & TR-SH Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit - Installation Instructions Before Your Installation Read
More informationCOUPLERS, FITTINGS & FILTERS
Quick Couplers Precision brass design Unrestricted free flow 4000 PSI Brass Couplers, designed for 4000 PSI and extended durability. Affordable and rugged all in one. 826169 1/4" FNPT 826176 3/8" FNPT
More information