General Information. Ball Curb Valve

Size: px

Start display at page:

Download "General Information. Ball Curb Valve"

Clarence Blankenship
5 years ago
Views:

General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead) 3.

1 General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 ( ) 2. Copper Alloy CDA No (Low Lead) 3. Copper Alloy CDA No (Low Lead) 2. Maximum pressure rating: 1. Through 1" valves 100psi 2. Greater than 1" valves 80psi 3. All Jones Curb Valves are tested individually. 4. Pipe wrenches should not be used to install Curb Valves. Smooth jaw wrench should be used on the flat area of the body. 5. It is recommended that all pressure testing be done prior to backfilling. 6. Replacement components for compression fittings are available from your Jones distributor. 7. Box quantities are located in the Trade Net Sheet. BLOW-OUT-PROOF STEM DESIGN - prevents separation and assures dependable, safe operation. OPTIMIZED KEY TO BALL CONNECTION - provides strong, reliable performance and resists breakage. FULL THREAD DEPTH - and drill depth on F.I.P. thread ends (meets ANSI/ AWWA C800 Standard). END CONNECTIONS - include copper flare, JONES 110 Compression Connection, Pack Joint Connection, Copper Flare, M.I.P and F.I.P. thread. Ball Curb Valve HEAVY BRASS COMPONENTS - constructed of solid ASTM B62 or Low Lead brass for strength and durability. MANUFACTURED AND TESTED - to ANSI/AWWA C800 Standard. DOUBLE O-RING SEALS - are supported in precision machined grooves and provide secure, leak - tight sealing. SUITABLE - for use as test valves on Backflow Preventers (complies with Notice of F.C.C.C. and H.R.). FULL ROUNDWAY - provides straight - through flow (reduced port available). END PIECES O-RING SEALED - to provide additional protection against leaking. STAINLESS STEEL REINFORCED SEAT - assures reliable seal under full flow and pressure. FLuoROCARBON COATED BALL - ensures smooth, easy turning operation. 300 PSIG - maximum working pressure. QUARTER TURN CHECK - is integrally cast on body to assure positive action. Checkless 360 turn is optional. 1

Ball Type Curb Valves J-1901 J-1902W J-1949SG J-1921 J-1901 Inlet: Copper flare nut J-1902W Copper flare nut - both ends. Quarter turn check - lock wing.

360 turn option available by noting L/S to order. J-1921 Inlet: Pack Joint Connection for CTS O.D* tubing J-1900 J-1945 J-1921SG J-1949 J-1900 F.I.P. thread - both ends. Quarter turn check.

let: F.I.P. thread. Quarter turn check. 360 turn option available by noting L/S to order. Outlet: M.I.P thread J-1921SG Inlet: Jones 110 Conductive Compression Connection for soft/annealed copper and CTS PE* tubing J-1949 Pack Joint Connection for CTS O.

J-1986 J-1902 J-6501SG J-6502 J-1986 Inlet: Pack Joint Connection for IPS PVC* tubing J-1902 Copper flare nut - both ends. Quarter turn check.

2 Ball Type Curb Valves J-1901 J-1902W J-1949SG J-1921 J-1901 Inlet: Copper flare nut J-1902W Copper flare nut - both ends. Quarter turn check - lock wing. 360 turn option available by noting L/S to order. J-1949SG Jones 110 Conductive Compression Connection for soft/annealed copper and CTS PE* tubing - both ends. Quarter turn check. 360 turn option available by noting L/S to order. J-1921 Inlet: Pack Joint Connection for CTS O.D* tubing J-1900 J-1945 J-1921SG J-1949 J-1900 F.I.P. thread - both ends. Quarter turn check. 360 turn option available by noting L/S to order. J-1945 Inlet: F.I.P. thread. Quarter turn check. 360 turn option available by noting L/S to order. Outlet: M.I.P thread J-1921SG Inlet: Jones 110 Conductive Compression Connection for soft/annealed copper and CTS PE* tubing J-1949 Pack Joint Connection for CTS O.D* tubing - both ends. Quarter turn check. 360 turn option available by noting L/S to order. J-1986 J-1902 J-6501SG J-6502 J-1986 Inlet: Pack Joint Connection for IPS PVC* tubing J-1902 Copper flare nut - both ends. Quarter turn check. 360 turn option available by noting L/S to order. J-6501SG Jones 110 Conductive Compression Connection for soft/annealed copper and CTS PE* tubing - both ends. 360 turn option available by noting L/S to order. Stop and drain. J-6502 F.I.P. thread - both ends. Quarter turn check. 360 turn option available by noting L/S to order. Stop and drain. *See charts on pages 4-5 for tubing and pipe that may be used with these connections. 2

- both ends 3/4" 1" Curb Valves Options,

J-288 J-2815 Brass straight lever handle.

3 Ball Type Curb Valves J-200 J-182 J-200 Solid tee head - F.I.P. - both ends 3/4" J-182 Flat head, Lockwing - F.I.P. - both ends 3/4" 1" Curb Valves Options, Parts and Accessories J-2815 J-2816NB J-288 J-2815 Brass straight lever handle. For use on Ball Type Curb Valves - 1" can be use on 1-1/2" and 2" Ball Type Curb Valve 1-1/2" J-2816NB 2" Square wrench nut adapter for 1-1/2" and 2" Ball Curb Valve 1-1/2" 2" J-288 Locking Device 3/4" 1" J-372 J-372-F J-1998 J-372 Double disc, wheel handle, F.I.P. x F.I.P. Thread 1-1/2" 2" J-372-F Double disc, wheel handle, inlet F.I.P. Thread; Outlet meter flange 1-1/2" 2" J-1998 Blow off ball valve, F.I.P. x M.I.P. Thread 2" *See charts on pages 4-5 for tubing and pipe that may be used with these connections. 3

4 Pipe Liners J-2807 J-2808 J-2809 J-2810 J-2807 Pipe Liner for use with CTS O.D. Jones 110 Compression Connection J-2808 Pipe Liner for use with CTS O.D. Pack Joint Connection J-2809 Pipe Liner for use with IPS PVC Pack Joint Connection 3/4" J-2810 Pipe Liner for use with IPS PE Jones 110 Compression Connections 3/4" 1" Tubing, pipe and liners used with Jones 110 Compression Connection Nominal size of connection Material Tubing or pipe O.D. Tubing or pipe wall thickness Tubing or pipe I.D. Liner part number 1/2" CTS Type "K" soft/annealed copper /4" CTS Type "K" soft/annealed copper Polyethylene PE J 1" CTS Type "K" soft/annealed copper Polyethylene PE J 1-1/4" CTS Type "K" soft/annealed copper Polyethylene PE J 1-1/2" CTS Type "K" soft/annealed copper Polyethylene PE J 2" CTS Type "K" soft/annealed copper Polyethylene PE J 3/4" IPS Polyethylene PE J 1" IPS Polyethylene PE J Type "K" soft/annealed copper tubing per ASTM B88 CTS polyethylene (PE) per ASTM D SDR-9 IPS polyethylene (PE) per ASTM D PE SIDR-7 4

Tubing, pipe and liners used with Pack Joint Connection Nominal size of connection Material Tubing or pipe O.D. Tubing or pipe wall thickness Tubing or pipe I.D. Liner part number 3/4" CTS Type "K" soft/annealed copper 0.

880 528705J 1-1/2" CTS Type "K" soft/annealed copper 1.621-1.630 0.067-0.077 - - Polyethylene PE 1.619-1.631 0.181-0.199 1.221-1.269 528706J 2" CTS Type "K" soft/annealed copper 2.120-2.130 0.076-0.

5 Tubing, pipe and liners used with Pack Joint Connection Nominal size of connection Material Tubing or pipe O.D. Tubing or pipe wall thickness Tubing or pipe I.D. Liner part number 3/4" CTS Type "K" soft/annealed copper Polyethylene PE J 1" CTS Type "K" soft/annealed copper Polyethylene PE J 1-1/2" CTS Type "K" soft/annealed copper Polyethylene PE J 2" CTS Type "K" soft/annealed copper Polyethylene PE J 3/4" IPS Polyethylene PE J 3/4" Sch. 40 PVC J 3/4" Sch. 80 PVC J 1" IPS Polyethylene PE J 1" Sch. 40 PVC " Sch. 80 PVC /2" IPS Polyethylene PE J 1-1/2" Sch. 40 PVC /2" Sch. 80 PVC " IPS Polyethylene PE J 2" Sch. 40 PVC " Sch. 80 PVC Type "K" soft/annealed copper tubing per ASTM B88 CTS polyethylene (PE) per ASTM D SDR-9 IPS polyethylene (PE) per ASTM D PE SIDR-7 IPS polyvinylchloride (PVC) per ASTM D1785 Pack Joint Connection Gasket for Pack Joint Connection for CTS O.D* tubing with CS thread 1-1/2" Gasket for Pack Joint Connection for CTS O.D* tubing with CS thread 2" Washer for Pack Joint Connection for CTS O.D* tubing with CS thread 1-1/2" Washer for Pack Joint Connection for CTS O.D* tubing with CS thread 2" 5

Equipment and Tools Brass Hammer Solid brass head with 10" wooden handle.

CATALOG NUMBER: H-18025 Copper flare nut Solid copper disc Brass cap CATALOG NUMBER:

shutting off water-drilled to exhaust water at right angle to CATALOG NUMBER:

6 Equipment and Tools Brass Hammer Solid brass head with 10" wooden handle. Weight 2-3/4 lb. CATALOG NUMBER: H Copper flare nut Solid copper disc Brass cap CATALOG NUMBER: H /2" 3/4" 1" 1-1/4" 1-1/2" 2" Flaring tool Used with regular copper flare nut to shut off line. CATALOG NUMBER: H /2" 3/4" 1" 1-1/4" 1-1/2" 2" Drilled flaring tool Fits on copper flare spud to cap off line. CATALOG NUMBER: H /4" 1" Reamer Used to make 45 flare on type"k" copper tubing. CATALOG NUMBER: H Used to make 45 flare on type "K" copper tubing without shutting off water-drilled to exhaust water at right angle to tubing. CATALOG NUMBER: H /2" 5/8" 3/4" 1" 1-1/4" 1-1/2" 2" 3/4" 1" Used to ream the inside of type "K" copper tubing to remove burrs prior to flaring. CATALOG NUMBER: H /2" 3/4" 1" Note: When using any striking tool, safety eye protection must be worn. Inspect hammer and tools for any damage after each use and repair or replace if mushrooming or chipping is evident. 6

5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves

5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping