Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
|
|
- Rhoda Clark
- 5 years ago
- Views:
Transcription
1
2 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for copper pipes 602 Pipe Cutters for plastic pipes 604 Flaring Tools 606 Installation Tools 609
3 Installation Tools Installation Tools Applications of the GEDORE pipe cutters Steel pipes EN Steel pipes EN Cast iron pipes EN 545, SML pipes EN 877 Electrical installation pipes EN Multi-layer composite pipes Plastic pipes Copper pipes EN 1057 Sheated copper pipes Thin-walled NF pipes Hydraulic pipes EN (DIN 2391) Precision steel pipes EN (DIN 2394) Stainless steel pipes EN (DIN ) *) depending on size / finish / pipe properties No No No. 220 No. 222 No No No No No No No No DN M (2180 3) M (2180 4) M (2180 5) 3-35 mm (2180 3) 3-45 mm (2180 4) 6-76 mm (2180 5) 1/8-2" (220020) 1.1/4-4" (220040) DN 6-32 (220020) DN (220040) 1/8-2" (222020) 1.1/4-4" (222040) DN 6-32 (222020) DN (222040) 3-35 mm (2180 3) mm (220020) mm (222020) 3-45 mm (2180 4) mm (220040) mm (222040) 6-76 mm (2180 5) 3-35 mm (2180 3) 3-45 mm (2180 4) 6-76 mm (2180 5) mm ( ) mm ( ) 3-35 mm 3-35 mm 16, 19, 25 mm M (230311) M (230321) 42 mm (2268 2) 6-76 mm (2270 5) 63 mm (2268 3) mm (2270 6) 42 mm (2268 2) 6-76 mm (2270 5) 63 mm (2268 3) mm (2270 6) 4-32 mm (230311) 4-32 mm (230010) mm mm (230020) (230321) 4-32 mm (230311) 4-32 mm (230010) mm mm (230020) (230321) 4-32 mm (230311) mm (230321) M mm 4-16 mm 4-16 mm 4-16 mm 4-16 mm Pipe Cutters for steel and cast iron pipes 210 Link pipe cutter for steel, SML and cast iron pipes Low space requirements due to ratchet-type operation In the standard version suitable for pipes from 85 to 175 mm Ø Can be extended if needed with extension set no , see table "Cutting range link pipe cutter no " Enamelled, Wall thickness 0 Code No ,2-8, Cutting range of the link pipe cutter no Cutting range from min. Internal Ø mm to max. External Ø mm Number of cutting wheels Accessories required * * x x x x x x * the link pipe cutter must be reduced by the corresponding number of cutting wheels E 210 Extension kit For extending the cutting range at No For more information see table "Cutting range link pipe cutter no " Contents 0 Code No. 1 Cutting wheel for steel No Spare link No Spare bolt No E 210 Cutting wheel for Spare link for Spare bolt for
4 Pipe cutter TUBEX for steel, SML and cast iron pipes Heavy-duty pipe cutter with 1 cutting wheel Frame in malleable cast steel Spindle protected by sleeve extension Enamelled, spindle gun-metal finished By exchanging the cutting wheels, may also be used for stainless steel pipes (size 2") With elastic feed using especially-installed spring system (size 2") Version with 3 cutting wheels see no. 222 Size, Wall thickness y 0 Code No. 1/ ,0-6, / ,6-8, Pipe cutter TUBEX for steel, SML and cast iron pipes Heavy-duty pipe cutter with 3 cutting wheels Frame in malleable cast steel Spindle protected by sleeve extension Enamelled, spindle gun-metal finished Ideal for working in confined, hard-to-reach places, since the cutter does not need to be turned through 360 By exchanging the cutting wheels, may also be used for stainless steel pipes (size 2") With elastic feed using especially-installed spring system (size 2") Size, Wall thickness y 0 Code No. 1/ ,0-6, / ,6-8, E E 222 Cutting wheel for , Cutting wheel for niro for , Cutting wheel for , Wheel bolt for , Wheel and pressure roller bolt for ,
5 Installation Tools Pipe Cutters for stainless steel pipes 2180 Pipe cutter for stainless steel pipes Easy cutting due to ball-bearing pressure rollers and cutting wheels Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Cutting wheel with high service life No and body in pressure-cast magnesium, no body in pressure-cast aluminium No with quick-release Enamelled E , Wall thickness y 0 Code No ,7-2, ,7-2, ,7-2, Cutting wheel for , E A Cutting wheel for E A Wheel bolt for , , E B Wheel bolt for , E B 2303 Pipe cutter QUICK AUTOMATIC niro for stainless steel pipes Body in pressure-cast zinc Cutting wheel made from high-alloy stainless steel, with high service life Automatic infeed by plate springs Enamelled E 2303, Wall thickness y 0 Code No ,7-3, ,0-3, Cutting wheel for stainless steel Cutting wheel for stainless steel Wheel bolt Wheel bolt
6 Miniature pipe cutter MINI-QUICK niro for stainless steel pipes Particularly suitable for barely accessible places Body in pressure-cast zinc Cutting wheel with high service life Enamelled, Wall thickness y 0 Code No ,7-2, E Cutting wheel for stainless steel Wheel bolt Pipe Deburring Reamer for stainless steel pipes 2325 Pipe deburring reamer for stainless steel pipes For internal and external deburring of stainless steel pipes Aluminium body Hardened taper section with 40 deburring blades, y 0 Code No /
7 Installation Tools Pipe Cutters for copper pipes 2250 Pipe cutter for copper pipes new For copper, brass, and light-alloy pipes, PVC hard plastic and plastic-coated pipes, thin-walled steel pipes, (precision steel and hydraulic pipes), composite pipes Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle Body in pressure-cast magnesium Enamelled E-2250, Wall thickness y 0 Code No ,7-2, Cutting wheel for E A Wheel bolt for , , E B 2300 Pipe cutter QUICK AUTOMATIC Body in pressure-cast zinc For copper, brass, and light-alloy pipes, PVC hard plastic and plastic-coated pipes, thin-walled steel pipes, (precision steel and hydraulic pipes), composite pipes With automatic infeed by plate springs, retractable deburring knife Enamelled E 2300, Wall thickness y 0 Code No ,7-3, ,0-7, Cutting wheel Cutting wheel Wheel bolt Wheel bolt
8 Miniature pipe cutter MINI-QUICK Particularly suitable for barely accessible places Body in pressure-cast zinc Enamelled For copper, brass, and light-alloy pipes, thin-walled steel pipes (precision steel and hydraulic pipes), Wall thickness y 0 Code No ,7-3, E 2310 Cutting wheel Wheel bolt Pipe Deburring Reamer for copper pipes Calibrating Tools for copper pipes 2320 Pipe deburring reamer For hydraulic and precision steel pipes, copper pipes, as well as pipes in non-ferrous metals For internal and external deburring Plastic body 239 Calibrating tool For exact calibrating of tube ends Gun-metal finish For semi-hard and soft copper pipes, y 0 Code No , 0 Code No. 12 x x x x
9 Installation Tools Pipe Cutters for plastic pipes 2270 Pipe cutter for plastic and composite pipes To cleanly cut multi-layer composite pipes or other plastic pipes Cutting wheel changeable without tools With retractable deburring tool, spare cutting wheel in handle With quick-release Body in pressure-cast aluminium Enamelled No with adjustable third pressure roller for optimally guiding different pipe dimensions , Wall thickness y 0 Code No ,5-8, ,0-19, E-2270 Cutting wheel for E A Cutting wheel for E A Wheel bolt for , E B Wheel bolt for E B
10 Shears set for plastic pipes To cleanly cut hard and soft plastic pipes, rubber hoses with or without textile reinforcement, and as well as various plastic profiled sections, such as cable ducts, for example Contains form blocks for 16, 19 and 25 mm pipes, 1 prism for profiles and 1 angle stop adjustable up to 45 Delivery in plastic case E 2261 Shear set for plastic pipes Spare knife Pipe shears for plastic pipes Suitable to cut PE-, PP-, PB-, PEX-. PPR-, MLP-/MSR-, VPE-, CPVC-, PVC- and PVDF-pipes Can also be used for hoses Smooth and accurate cutting, one hand operation Cutting blades changeable without tools Body in pressure-cast magnesium Enamelled E , y 0 Code No Spare knife for E A Spare knife for E A Spare bolt for / E-2268 B
11 Installation Tools Flaring Tools 2330 Flaring tool boerdex For flaring copper and light-alloy pipes of various hardnesses For cooling systems and refrigeration technique Body in pressure-cast zinc, enamelled Flange cone 90 hardened = 45 angled from pipe Clamping jaws made from steel, smooth inside, phosphated Opening angle 90 = 45 angled from pipe Flaring tools for brake lines see no Contents 0 Code No. for metric pipes 4, 4.75, 6, 8, 10, 12, 14 mm cone for 180 flaring No clamping jaw 4-14 mm No for metric pipes 15, 16, 17, 18, 19 mm cone for 180 flaring No clamping jaw mm No for inch pipes 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4" 1 cone for 180 flaring No clamping jaw 3/16-3/4 No Contents 0 Code No. for metric pipes 4, 4.75, 6, 8, 10, 12, 14 mm for inch pipes 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4" 1 cone for 180 flaring No clamping jaw 4-14 mm No clamping jaw 3/16-3/4 No for metric pipes 4, 4.75, 6, 8, 10, 12, 14, 15, 16, 17, 18, 19 mm 1 cone for 180 flaring No clamping jaw 4-14 mm No clamping jaw mm No cone 90 cone
12 Flaring tool set boerdex in i-boxx 72 For flaring copper and light-alloy pipes of various hardnesses For cooling systems and refrigeration technique Body in pressure-cast zinc, enamelled Flange cone 90 hardened = 45 angled from pipe With cone for 180 flaring = 90 angle from pipe Clamping jaws made from steel, smooth inside, phosphated Complete set for metric and metric/inch pipes With pipe cutter 3-35 mm Ø Delivery in GEDORE i-boxx 72 no L Dimensions: W 367 x D 316 x H 72 mm Flaring tools for brake lines see no Contents 0 Code No. for metric pipes 4, 4.75, 6, 8, 10, 12, 14 mm clamping jaw 4-14 mm No pipe cutter 4-32 mm No cone 180 No sheet steel case No for metric pipes 15, 16, 17, 18, 19 mm clamping jaw mm No pipe cutter 4-32 mm No cone 180 No sheet steel case No for inch pipes 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4" 1 clamping jaw 3/16-3/4 No pipe cutter 4-32 mm No cone 180 No sheet steel case No Contents 0 Code No. for metric pipes 4, 4.75, 6, 8, 10, 12, 14 mm for inch pipes 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4" 1 clamping jaw 4-14 mm No clamping jaw 3/16-3/4 No pipe cutter 4-32 mm No cone 180 No sheet steel case No for metric pipes 4, 4.75, 6, 8, 10, 12, 14, 15, 16, 17, 18, 19 mm 1 clamping jaw 4-14 mm No clamping jaw mm No pipe cutter 4-32 mm No cone 180 No sheet steel case No E 233 Parts Flaring tool boerdex Clamping jaw 4-14 mm Clamping jaw mm Clamping jaw 3/16" - 3/4" Cone for 180 flaring (= 90 angled from pipe) Pipe cutter for copper pipes 3-35 mm
13 Installation Tools Double flaring tool set in i-boxx 72 For standard-compliant (DIN 74234) double flaring tools For brake lines, coolant lines, hydraulic and pneumatic pipes with a wall thickness of 0.7 to 1.0 mm Body in tempered cast iron GTW 40, stove enamelled Clamping jaws made from steel, smooth inside, phosphated Complete set for metric and/or inch pipes With pipe deburring reamer 4-32 mm Ø and miniature pipe cutter 4-16 mm Ø Delivery in GEDORE i-boxx 72 No L Dimensions: W 367 x D 316 x H 72 mm Contents 0 Code No. for metric pipes 1 basic frame No clamping jaw metric No cones 4,75-10 mm No cones, No miniature pipe cutter 4-16 mm No pipe deburring reamer 4-32 mm No GEDORE i-boxx 72 No L Contents 0 Code No. for metric + inch pipes 1 basic frame No clamping jaws No cones 4,75-10 mm No cones 3/16-3/8" No cones No miniature pipe cutter 4-16 mm No pipe deburring reamer 4-32 mm No GEDORE i-boxx 72 No L cone 90 cone 180 flare F open flare E double E 2340 Parts / Basic frame Clamping jaw metric Clamping jaw inch Cone 4,75 mm for flare types E + F Cone 5 mm for flare types E + F Cone 6 mm for flare types E + F Cone 8 mm for flare types E + F Cone 9 mm for flare types E + F Cone 10 mm for flare types E + F Cone 3/16" for flare types E + F Cone 1/4" for flare types E + F Cone 5/16" for flare types E + F Cone 3/8" for flare types E + F Cone (adjustment gauge) for flare types and cone 90 + flare E Cone (adjustment gauge), metric, 180, for flare types E + F Cone (adjustment gauge), inch, 180, for flare types E+F Pipe cutter MINI-QUICK, 4-16 mm Pipe deburring reamer 4-32 mm
14 Installation Tools 312 Valve holder venti-quick In aluminium Drain valve holder and screw-in wrench for eccentric and standard valves 1.1/4 Usable from top or bottom 314 Corner valve socket wrench Chrome-vanadium steel 31CrV3, hardened, zinc-plated With chamfered driving edges 1/2" internal square drive For surface-protective assembling of all usual corner valves y 0 Code No y internal Ø 0 Code No Installation wrench For washbasin mountings With moveable stud screw insert for bathroom fittings attachment M10 or M12 Open end spanner size 17x19 mm for tightening or loosening of corner valves 3175 Installation wrench For washbasin mountings With moveable stud screw insert for bathroom fittings attachment M10 or M12 With reversible ring ratchet size 17 mm for tightening or loosening of bathroom fittings connections even in hard-to-reach areas Open end spanner size 19 mm for tightening or loosening of corner valves GEDORE vanadium steel 31CrV3, matt chrome-plated for stud screws Size y 0 Code No. M10 17x19 mm M12 17x19 mm for stud screws Size y 0 Code No. M10 17x19 mm M12 19x19 mm Stud screw wrench For bathroom fittings attachment (stud screws) M6, M8, M10, M12 With pivotable thread insert Nickel-plated 3173 Stud screw inserter Self-gripping For the fast and easy insertion and removal of studs, bolts, etc. With hexagon drive y 0 Code No Size 0 Code No. M M M M
15 Installation Tools 3165 Basin wrench For single lever taps and taps with central screw connection up to size 36 mm With 13 mm hexagon drive and additional adaptors for 9, 10, 11 and 14 mm With pivoted hook for right or left hand operation Enamelled 320 Wrench for plumbing fittings With pawl clamp With exchangeable plastic jaws no , width 8 mm For nickel-plated and chrome-plated fittings Chrome-vanadium steel 31CrV3, hardened, chrome-plated Handle enamelled O P y 0 Code No Set of plastic jaws Strap wrench y 0 Code No Very gentle to surfaces, particularly suitable for chrome-plated fittings and polished surfaces Handle in light metal, enamelled With high-strength nylon strap 329 Special siphon pliers For tightening and removing screwed PVC pipe joints with round union nuts With lap joint and three locking positions, jaw width 10 mm No with plastic jaws for special surface protection Enamelled, [ y W 0 Code No E 126 Spare strap High-strength nylon strap , y 0 Code No y W 0 Code No
16 Stepped key For the installation and removal of valve nipples 3/8", 1/2", 3/4", 1", 1.1/4" Drive with 18 mm square Enamelled 3785 Plumber's wrench With 14 functions for tap extensions 3/8", 1/2", 3/4", 1" Depth up to 100 mm Hexagon drive nut size 17, 22 mm Chrome-plated For the installation and removal of radiator valves and runback screwed unions For stud screws M6, M8, M10, M12 and for screw plugs 3/8", 1/2" 0 Code No Combination stepped key y 0 Code No. 220 x For the installation and removal of radiator valves, runback screwed unions 3/8" - 1" and short tap extensions With pin, hexagon and bi-hexagon nut drive 1/2" square drive Nickel-plated Radiator valve spanner Spanner for tightening and removing Euro-cone radiator compression fittings with A/F 30 mm cam lock and hex nuts Short, flat version with ratchet DBGM (= German Utility Patent) Ratchet facilitates tightening of straight and elbow compression fittings underneath radiators Head end socket for 1/2 extension. The extension is used as a handle and also provides higher torque Side socket for 1/2 extension for working with the ratchet in front of the radiator Socket for no combination stepped key 3/4 radiator valve nipples Combi-stepped key No with ratchet 1/2" No Combi-stepped key No with ratchet 1/2" No Combi-stepped key with 5 steps 3/8"-1" Combi-stepped key with 8 steps Ratchet 1/2" Radiator valve spanner no with extension 1/2" no Radiator valve spanner 30 mm Extension 1/2" 125 mm
Especially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationPliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces
Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationMECHANICS TOOLS. Back
MECHANICS TOOLS Back FULLER AND FULLER PRO SLIP JOINTS Designed by professionals for professionals, FULLER PRO Slip Joint and Groove Joint Pliers offer a lifetime of performance we guarantee it. The FULLER
More information85 Smart Grip, the Water Pump pliers with automatic adjustment
85 Smart Grip, the Water Pump pliers with automatic adjustment patented DIN ISO 8976 The adjustment procedure to match with the workpiece acts self-controlled with the SmartGrip. Position the pliers, press
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationSAWS, PIPE CUTTERS. Design. Blade
SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting
More informationlumbing tools Pipe / Tube cutting 13 Bending Assembly and Maintenance Clamping Flaring / Swaging Drain cleaning
P lumbin tools Pipe / Tube cuttin 13 12 Bendin 31 Clampin 24 Assembly and Maintenance 35 Flarin / Swain 27 Drain cleanin 37 Pipe / Tube cuttin Tube cutters Mini tube cutter For copper, brass, aluminum
More informationPolished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
More informationCombination Pliers. Pliers. Long Nose Pliers, straight. Bent Nose Pliers, 200 mm. Flat Nose Pliers, 160 mm 2013/2014
Combination Pliers - satin nickel plated - with slip guard/ soft grip handles - red/black 325 Combination Pliers, Length 165 mm 326 Combination Pliers, Length 175 mm 327 Combination Pliers, Length 200
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationLIERS P
70 73 80 85 87 91 95 96 P LIERS 97 99 100 101 103 104 105 71 BOST pliers Flanged trivet Master clearance. Shot-blasted finish Transparent anticorrosion varnish. Very high reliability of the unlimited use
More informationNEWS KNIPEX Quality Made in Germany
NEWS 2014 KNIPEX Quality Made in Germany Product videos KNIPEX Pliers Wrench XL Pliers and a wrench in a single tool The unique installation tool now also in 400 length. For opening widths up to 85 / 3
More informationPipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape
Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More information20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered
20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationHolesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm
Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw
More informationDiesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
More informationTin snips Bolt cutters Pruning shears. Cable shears insulated Cable shears Electricians scissors PVC pipe cutters. Superior quality steel
Shears Tin snips Bolt cutters Pruning shears able shears insulated able shears Electricians scissors PV pipe cutters Secure cut Designed for a secure and accurate cut through sheet steel, concrete reinforcement,
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationModel No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
More informationDiesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationPliers for Electrical Installation 13
Pliers for Electrical Installation 13 The all-rounder for professionals Multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, 6 functions in one
More informationPLASTIC PIPE WELDING PLASTIC PIPE WELDING
PLASTIC PIPE WELDING PLASTIC PIPE WELDING Plastic Pipe Welding Electric sleeve welding unit 222 Sleeve welding units 223 Butt welding machines 224 Butt welding units 228 REMS EMSG 160 Electric sleeve welding
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationQuickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS
Quickbits - Adaptors - Attachments - Drills - Countersinks - Drill Countersinks QUICKBITS Quickbits Quickbits Index 66 Quickbits Adaptors & Extensions 68 Quickbits Adaptors Socket 66 Quickbits Chuck Mini
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More information"HAAS-TOOLS" - Profi Tools for the Plumber
- Profi Tools for the Plumber 15 15.01-15.03 Our Special Tools 15.04-15.04 Seal Cutting Case 15.05-15.07 Tools for Installing 15.08-15.09 Pipe-Planer / Pipe Cutters 15.10-15.10 Hole Drill 15.11-15.11 Saws
More informationDrive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33
Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:
More informationPRODUCT CATALOGUE Distributor: BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3
BODDINGTONS ELECTRICAL PRODUCT CATALOGUE EDITION 3 PRODUCT CATALOGUE w w w. b o d d i n g t o n s - e l e c t r i c a l. c o m Distributor: Prospect House, Queenborough Lane Great Notley, Braintree, CM77
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationA new dimension of changeability. Unique options for every application. Developed and made in Germany by:
A new dimension of changeability Unique options for every application Developed and made in Germany by: The BaerGrip ratchet is in fact very versatile. As the only 1/4"-ratchet in the world it can be used
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationZ Order-No ½ ½ x
www.wiha.com Safety note: When working with cutting pliers beware of wire ends flying away. Please wear safety glasses. Combination pliers and high-leverage combination pliers. Needle nose pliers with
More informationINNOVATIONS. KNIPEX Siphon and Connector Pliers. Exclusively distributed by MADE IN GERMANY
MADE IN GERMANY INNOVATIONS KNIPEX Siphon and Connector Pliers For siphons, tube fittings and connectors up to 80mm diameter Fine adjustment for ideal adjustment to diverse diameters Robust, heavy duty
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationPipe Cutters (Metal) BT The BT is designed to fit the Berkley BT-5020 Power Threader as well as the RIDGID Model No. 300 and 535.
Berkley Tool is proud to offer the most comprehensive selection of replacement parts and accessories for pipe threading and cutting equipment. Berkley s high quality products are also designed as replacement
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationTesting burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.
Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationSimplex Baseboard System Baseboard System
Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationAdaptors & Extensions
Quickbits 44 Adaptors & Extensions 44 Offline Driver 45 Drill Adaptor 45 Mini Chuck 46 Fixed Shank Drills 47 Changeable Drills 48 Drill Countersinks 49 TCT Drill Countersinks 50 TCT Counterbore 51 Plug
More informationOperating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationAngled combination pliers
COMBINAION LIES 8248 Angled combination pliers Specially offset teeth in the grip surfaces for best-possible gripping on pipes and screws A pliers head angled at 60 goes easy on your joints and tendons.
More informationPunch Type Clamps. 116 Clamp guards provide a smooth ID when applied to Punch-Lok center punch hose clamps. PUNCH-LOK SPECIAL ORDER NON-STOCK CLAMPS
Hose Scribe Punch Type Clamps Hose Scribe 114 HOSESCRIBE Hose Identification System The First Self-Contained,Computerized Hose Identification Tag engraving System Three Easy Steps 1. Insert one of three
More informationALFRA hole punches application overview
ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F
More informationTOOLS/PROCESSING SERVICES TOOLS + PROCESSING SERVICES
TOOLS/PROCESSING SERVICES 7 TOOLS + PROCESSING SERVICES MINITEC PROFILE SYSTEM 583 TOOLS/PROCESSING SERVICES TOOLS s l oot TOOLS 584 MINITEC PROFILE SYSTEM BALL-HEADED KEY - Chrome plated, with handle
More informationCUTTERS CUTTERS
14 www.eclipsetools.com High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter Oil hardened & tempered Hot-formed
More informationProduct #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More information000304A A B C D 800 Top E 1000 Pag. 00/05
Measuring tools Dividers Protractors, squares Rules, scribers Screw pitch gauges Feeler gauges Welding seam gauges Drawing tools Dividers with joint Din 686 With square legs, made of forged steel. Hardened
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationCable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
More informationHardware Fitting Accessories Bolts
Lever action flush bolt With slide Width: 19 mm Stroke (a): 25 mm 1 Flush bolt 1 Set of fastening material With lever arm Width: 19 mm Stroke (a): 18 mm 1 Flush bolt 1 Set of fastening material Stainless
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More informationQuickbits -Adaptors -Drills -Countersinks -Drill Countersinks
QUICKBITS Quickbits -Adaptors -Drills -Countersinks -Drill Countersinks Quickbits Quickbits Index 74 Quickbits Adaptors & Extensions 76 Quickbits Adaptors Socket 74 Quickbits Chuck Mini 84 Quickbits Countersinks
More informationThe Ensat self-tapping threaded insert...
The nsat self-tapping threaded insert... nsat is a self-tapping threaded insert with external and internal thread, cutting slots or cutting bores. A continuous process of further development has brought
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More information535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationUnrivalled cutting performance
PLIERS Perfect material processing CIMCO pliers perform brilliantly in punishing everyday use. Both material and design are designed for a tough workload. The high-alloy steels used are specially designed
More informationCARPENTRY & MEASURING TOOLS CATALOGUE
CARPENTRY & MEASURING TOOLS CATALOGUE 2 CARPENTRY TOOLS CARPENTRY TOOLS 3 SMC - 431 T - BAR CRAMPS Bar Manufactured From Special 'T' Bar Section Steel Head & Slide Made Of Cast Iron Suitable For Heavy
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationMain Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
More informationCUTTERS CUTTERS
www.eclipsetools.com 14 co s. nt ne po om ec lin on m High grade alloy steel Induction hardened cutting edges Double leaf springs Hot drop forged Mirror polished surface 4-1/2 Semi-Flush Diagonal Cutter
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationAvailable from. Trade Instinct Olive Cutter
Available from Trade Instinct Olive Cutter PROFESSIONAL Soldering & Brazing Trade Instinct Omat INST2361 & INST2363 The Trade Instinct INST2350 Soldering & Brazing Pad resists temperatures up to 600 C.
More informationTube Fabricating Equipment
Tube Fabricating Equipment Tube Cutters Tube Benders Flaring Tools Deburring Tool Tube Cutter Tube Benders TC-1000-BPD 1/8" - 1 1/8" 367-FH-BPD Lever Type TC-1050-BPD 1/8" - 5/8" p. M5 p. M5 p. M5 p.
More informationStanley Hand tools Stanley FatMax push-lock adjustable joint pliers. 3 piece Stanley FatMax pushlock. Stanley FatMax groove joint pliers.
Stanley FatMax push-lock adjustable joint pliers Slip-resistant Bi-Material handle for a comfortable grip. Multipurpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationProfessional Pliers. Quality to Depend on
Professional Pliers Quality to Depend on - 227 - High Leverage Pliers High Leverage Pliers High Leverage pliers boast a labor-saving design to generate greater productivity with less effort. Ergonomic
More informationw r e n c h e s & v i c e s
4 w r e n c h e s & v i c e s 4.1 ADJUSTABLE WRENCHES 2 4.2 CHAIN WRENCHES 4 4.3 ONE HAND WRENCHES 6 4.4 TORQUE WRENCHES 6 4.5 VALVE WHEEL WRENCHES 7 4.6 SELF ADJUSTABLE PIPE WRENCHES 7 4.7 PIPE WRENCHES
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More information03 Pliers and cutters
0 Pliers and cutters Heavy-duty combination pliers 47 Combination pliers 48 Water pump Cutting pliers 49 50 pliers Insulated pliers 51 Circlip pliers 54 ocking pliers 55 Mini pliers 56 Pincers 58 Bolt
More information5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
More informationPower and Precision. Pliers. Multigrip Pliers. Multigrip Pliers
Superior cutting edge hardness thanks to metallurgical and heat treatment advances Superior grips Ergonomic, spatula shaped handles Safety grip guard Handle springs tested to 1,000,000 cycles Highly solvent
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationDiagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
More informationPliers sets p.172. Multigrip pliers p.174. Combination pliers p.174. Cutting pliers p.175. Long nose pliers p.176. Circlips pliers p.
170 PIERS Pliers sets p.172 Multigrip pliers p.174 Combination pliers p.174 Cutting pliers p.175 ong nose pliers p.176 Circlips pliers p.178 End nippers p.180 ock-grip pliers p.180 1000 VOTS PIERS AND
More informationAGRICULTURE RANGE. KNIPEX CoBolt Compact Bolt Cutters
AGRICULTURE RANGE Fendt KNIPEX CoBolt Compact Bolt Cutters precision cutting edges for soft and hard wire as well as piano wire cuts components like bolts, nails, rivets, etc. up to 5.2 dia. exceptional
More informationSPANNERS. An ISO 9001:2000 Certified Company
SPANNERS NVR offers wide range of Spanners, forged from high grade Chrome Vanadium Steel using the latest production methods. NVR Spanners made to DIN, ANSI and ISO Standards meets the latest requirements
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More information