Tube Fabricating Equipment
|
|
|
- Wilfrid Reed
- 6 years ago
- Views:
Transcription
1 Tube Fabricating Equipment Tube Fabricating Equipment Testing & Service Tools Flaring Tool Kits Tube Benders Swaging Tools Deburring Tool Flaring Tools Tube cutters
2 Tube Cutters Sizes 2 to 64 Kloskut Cutters Sizes 2 to 32 PTC-001 Plastic Tube Cutter Tube Cutters Hand Benders Page 3 Page 3 Page 3 Spring Type Benders Page 4 Combination Tools Rolo-Flair Page 4 Metric Flaring Flaring Tools In-Ex Deburring Tool Page 5 Page 5 Page 5 Deburring Tools Page 5 2
3 PART NO. DESCRIPTION Tube Cutters For hard or soft copper, aluminum, brass, thin wall steel, stainless steel, monel, titanium and other metal tubing Rollers have flare cut-off groove, fold away reamer and spare cutting wheel. TC-1000-BPD For 1/8" to 1 1/8" (4 to 28 mm) O.D. tubing, (1/8" to 1" nom.). ength: 4 15/16" Weight: 6 1/2 oz. Replacement Parts: S75015-BPD S75046-BPD Standard cutting wheel Cutting wheel for stainless steel and hard temper tubing TC-1050-BPD For 1/8" to 5/8" (4 to 15 mm) O.D. tubing, (1/8" to 1/2" nom.) Requires only 1 1/4" swing radius. (Requires only 1 3/8" swing radius with 5/8" tube.) Repositioned rollers to bottom of tool allows for easier cutter engagement on tubing. Enclosed feed-screw minimized contamination, assuring continued free operation. Redesigned feed mechanism improves overall cutting action. Size: 1 3/4" x 1 1/4" x 1/2" Weight: 2 1/2 oz. S32633-BPD 174-F-BPD Cutting wheel for TC-1050-BPD For 3/8" to 1 1/8" (10 to 28 mm) O.D. tubing, (1/4" to 1" nom.). Requires only 1 15/16" swing radius. (Requires only 2 1/4" swing radius with 1 1/8" tube.) Size: 2 11/16" x 2 1/32" x 1 1/8" Weight: 5 oz. Replacement Parts: S75015-BPD S75046-BPD Cutting wheel Cutting wheel for stainless steel and hard temper tubing Kloskut Tube Cutters Adjustable tube cutters to produce square cut ends with no external burr and minimum internal burring when used on fully annealed copper, brass, aluminum, and steel tubing. Features a hardened and burnished tool-steel cutting wheel, flare cut-off grooves in rollers for removal of old flares, swing-away reamer for removing internal burrs. Handle feeds and adjusts cutting wheel to uniformly cut tubing as the cutter is rotated. NOTE: Tube cutters are not recommended for use with stainless steel tubing because of the work hardening effect. The use of a hacksaw with a Tru-Kut Sawing Vise or a rotary teeth saw is best recommended for stainless steel. 218B-BPD Medium Kloskut For tubing sizes -2 (1/8" O.D.) to -18(1 1/8" O.D.) Weigth: 11 oz. 218B-BPD PTC-001 PTC-001RB Plastic Tube Cutter May be used with polyethylene, Polypropylene, nylon and other thermoplastic tubing. For tube O.D. sizes 1/8" to 1/2" Replacement blades 3
4 PART NO. Tube Benders, ever Type For soft copper, aluminum, brass, steel and other metal tubing 367-FH-BPD 368-FH-BPD DESCRIPTION Triple Header Benders Calibrated markings for making accurate left-hand, right-hand and offset bends. Ninety degree start requires less effort - making bending fast and easy. For 1/8", 3/16" and 1/4" (3, 4, and 6 mm) O.D. tubing, 9/16" radius to center of tube. For 1/4", 5/16" and 3/8" (6 and 8 mm) O.D. tubing, 15/16" radius to center of tube. Metric Tube Benders Triple Header Benders For annealed copper, aluminum, steel, stainless steel and hard copper tubing of bending temper. ever type, multiple size benders. Calibrated markings for making accurate left-hand, right-hand, and offset bends. Ninety degree start requires less effort; makes bending fast and easy. BENDING RANGE Radius to Center Tube O.D. of Tube (Inches)(mm) (Inches) (mm) 367-FH-BPD 1/8, 3/16, 1/4 3,4, 6 9/ FH-BPD 1/4, 5/16, 3/8 6, 8 15/ Tube Benders, Spring Type For soft copper and aluminum tubing For 1/4" to 5/8" O.D. tubing. Tools allow hand bending of soft tubing to any shape without collapsing walls. Special spring steel, nickel finished. End belled for quick tube removal. BENDER TUBE O.D. ENGTH WEIGHT (INCHES) (INCHES) (OZ.) 102-F-04-BPD 1/ F-06-BPD 3/ F-08-BPD 1/ /2 102-F-10-BPD 5/
5 PART NO. 525-F-BPD DESCRIPTION Flares and burnishes 3/16" to 5/8" (5 to 16 mm) O.D. tubing. Unique, self-adjusting, tube holding mechanism permits use in tight quarters. Faceted, hard chrome finished cone rolls out and burnishes perfect 45 flare above the tube holding mechanism. Weight: 1 3/4 lbs. 93-FB-BPD For 3/16", 1/4", 5/16", 3/8" and 1/2" O.D. tubing. Recommended for Bundy, GM and other brazed or welded soft steel tubing (wall thickness to.035"). Also makes single or double flares in soft copper or aluminum tubing. Forged steel yoke; swivel-type hard chrome-finished flaring cone. Weight: 3 lbs. 945TH-BPD Rolo-flair Manual Rotary Flaring Tool For soft metal tubing. Precision burnished 45 flares in tube sizes from 2 (1/8" O.D.) to 12 (3/4" O.D.) with an easy turn of the handle. For copper and aluminum alloy. Weight: 2 1/2 lbs. In-Ex Tube Deburring Tool 226-BPD A quick twist of the wrist will deburr either the O.D. or the I.D. of the tube end. Parker s In-Ex deburrer can be used on annealed steel, stainless steel, copper and aluminum, for tube sizes 1/8" to 1 5/8" O.D. 226RB-BPD 208-FSS-BPD Insert tube into the convexed end of the In-Ex for inside deburring and the opposite end for outside deburring Rotate in either direction. Replacement blades can be ordered. See bulletin 4391-B226 for details. Weight: 10 oz. Replacement Blades Reamer for aircraft grade stainless steel tubing. Black finish Weight: 10 oz. 5
6 Notes 6
Tube Fabricating Equipment
Tube Fabricating Equipment Tube Cutters Tube Benders Flaring Tools Deburring Tool Tube Cutter Tube Benders TC-1000-BPD 1/8" - 1 1/8" 367-FH-BPD Lever Type TC-1050-BPD 1/8" - 5/8" p. M5 p. M5 p. M5 p.
Rigid Fluid Lines Tubing Materials Material Identification 7-1
Aircraft fluid lines are usually made of metal tubing or flexible hose. Metal tubing (also called rigid fluid lines) is used in stationary applications and where long, relatively straight runs are possible.
FULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
KEY BENEFITS. Eliminate crossed handles Comfortable Grip KEY FEATURES
INDEXING HANDLE TUBE BENDER The TurnPro Indexing Handle Tube Benders perform bends up to 180 in a single opera on. A patented quick-release trigger allows users to reposi on handles as they come together,
Sheet Metal Tools/HVAC
Sheet Metal Tools/ Klein s line of sheet metal and tools make it easy to work with sheet metal, ductwork and tubing. These job-matched tools are proven to stand the test of time with superior results.
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
Tools and Accessories
Tools and Accessories TurnPro TM Tools Indexing Handle Tube Bender Tube Cutter Coiled Tubing Straightener Ratchet Wrenches Liquid Leak Detector Preswaging Tool www.mysspusa.com At SSP, we are proud to
REPUTE tube fittings are manufactured to stringent quality control program and internal standards which
Introduction: REPUTE tube fittings are manufactured to stringent quality control program and internal standards which assure the highest quality available in the industry. Two ferrule tube fittings are
Design for Manufacturability Guide
Design for Manufacturability Guide WHO WE ARE Short-to-medium run metal stamping manufacturer Annual volume of 250 to 300,000 per part number We serve a very diversified mix of customers & markets Our
TOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
Akron (800) Bentleyville (800) Erie (800) Meadville (800) Warren (800) Youngstown (800)
Stock and Pricing as of DECEMBER 1st - Applies to Current Stock Available* Circular Saw Blade 3-Pc. Step Drill Set 7-1/4 Carbon Tipped Precision honed C3 carbide tips; 40 TPI Heat/vent expansion slot design
Heavy Duty Pipe Wrench
Heavy Duty Pipe Wrench High-tensile ductile iron handle and hardened tool-steel parts. Designed to withstand heavy demands. Easy-spin adjusting nut is heat-treated for durability. Drop-forged jaw is heat-treated
Reed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
Reed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
Especially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
IX. FLARED JOINTS IX. FLARED JOINTS
IX. FLARED JOINTS IX. FLARED JOINTS While copper tube is usually joined by soldering or brazing, there are times when a mechanical joint may be required or preferred. Flared fittings (Figures 28 and 29)
HMP-200 BENDER INSTRUCTION SET
HMP-200 BENDER INSTRUCTION SET HMP-200 BENDER ASEMBLY INSTRUCTIONS STEP 1 STEP 2 BOLT LEFT SIDE PLATE TO BASE AS SHOWN WITH 1/2 x20 HEX BOLT & FLAT WASHER WELD BASE TO PLATE ON EACH SIDE NOTE: OFFSET HOLE
Sheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES PRICE HEAVY-DUTY BLADES PER PER E-BLADES NUMBER Great Low Prices E-100 10 22025 $14.65 Heavy Duty HSS for steel and aluminum.
Product Information Report Hardflex Band Saw Blades
Overview Hardflex Bandsaw Blades are great all-purpose blades for cutting almost any metal. Cuts tough material like stainless steel. Works equally well on solids, tubing and structural shapes. Features/Benefits
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES
DEBURRING TOOLS THE WORLD'S BEST DEBURRING TOOLS AND BLADES ROYAL DEBURRING BLADES Great Low Prices HEAVY-DUTY E-BLADES BLADES PER NUMBER E-0 22025 PRICE PER $14.20 Heavy Duty HSS for steel and aluminum.
Product #: Product #:
STANLEY FATMAX Push-Lock Groove Joint Pliers Multi-purpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick and easy adjustment in 17 positions. Induction hardened jaws
How to make tailwheel shock rubber donuts and aluminum shims with formed flange
How to make tailwheel shock rubber donuts and aluminum shims with formed flange The following shows how to form a flange on the inner hole of aluminum shims to go between the rubber donuts for the tailwheel
Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
Tools of the Shop MEGR 2299
Tools of the Shop MEGR 2299 Machinery General Never wear long sleeves, never allow long hair to hang free. Always wear safety glasses. A cutting tool is usually an insert, drill bit, end mill, or device
Trade of Plumbing. Module 2: Domestic Hot and Cold Water Service Unit 2: Copper Pipe Jointing Compression Fittings Phase 2
Trade of Plumbing Module 2: Domestic Hot and Cold Water Service Unit 2: Copper Pipe Jointing Compression Fittings Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History...
5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
VERSAtoolTM SAE J533 & SAE J1453. Safety and Operating Manual
VERSAtoolTM Mechanically Assisted / Manual Tube End Flare & Flange Machine SAE J533 & SAE J1453 Safety and Operating Manual I. Safety Instructions................................. Page 2 II. Specifications.....................................
Punch Formers, Punches & Scribers
Centerless Punch Grinders High accuracy Centerless - no alignment necessary Rollers accept 0.06 1 diameters Model Weight PGA 5.5 kg 302470 Motorized Motor 110V, 25 watts Roller speed: 130 RPM D: 1.5-25mm
MASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
Holemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
lumbing tools Pipe / Tube cutting 13 Bending Assembly and Maintenance Clamping Flaring / Swaging Drain cleaning
P lumbin tools Pipe / Tube cuttin 13 12 Bendin 31 Clampin 24 Assembly and Maintenance 35 Flarin / Swain 27 Drain cleanin 37 Pipe / Tube cuttin Tube cutters Mini tube cutter For copper, brass, aluminum
Hydraulic Adapters (080201/ MS# 51820) (080202/ MS# 51815) (071502) (081602) (080203/MS# 51813)
Steel and stainless steel bite type fittings meet all design and performance requirements for hydraulic flareless tube fittings in Standard J514 published by the Society of Automotive Engineers (SAE).
Drill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
Special Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
Power Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
SECTION 10. SAFETY METHODS FOR TURNBUCKLES
SECTION 10. SAFETY METHODS FOR TURNBUCKLES 7-179. GENERAL. Safety all turnbuckles with safety wire using either the double or single-wrap method, or with any appropriately approved special safetying device
CHAPTER 23 Machining Processes Used to Produce Various Shapes Kalpakjian Schmid Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1
CHAPTER 23 Machining Processes Used to Produce Various Shapes Manufacturing Engineering and Technology 2001 Prentice-Hall Page 23-1 Examples of Parts Produced Using the Machining Processes in the Chapter
Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
COFA. Deburring Tool for Elliptical or Contoured Surfaces. increased performance. from stock
Deburring Tool for Elliptical or Contoured Surfaces increased performance from stock Cat. No. HTC015 Introduction Catalog HTC015No. HTC14 The HEULE COFA deburring tool removes burrs from the front and
Written by Frank Garcia Ver. 2
Written by Frank Garcia frankg670@gmail.com 3-18-2017 Ver. 2 Preparing Copper Or Brass inlay wire. The Copper or Brass wire which is used with this inlay technique is flat. The wire can be purchased from
Celebrating. 65 Years
Celebrating 65 Years Contents Beveling Equipment Clamps - Internal Clamps - External Auxiliary Equipment Pipe Lifting Welding Qualification Pipe Bending Beveling Equipment On Band Type Beveling Machine:
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
Complete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
Tool School - Rotary Draw Bending Tooling. An Engineer s Guide to Bending Tubes
Tool School - Rotary Draw Bending Tooling An Engineer s Guide to Bending Tubes Tube Form Solutions Tool School Rotary Draw Bending Tooling Tool School Agenda: Introduction To Rotary Draw Bending Engineering
Plastic SECTION. Quick Release Cutters. Internal Pipe Cutters. Ratchet Shears. Scissor Shears. Plastic Pipe Saws. PLAS In-Line Rotary Cutter.
5 SECTION Plastic PIPE Tools Quick Release Cutters Internal Pipe Cutters Ratchet Shears Scissor Shears Plastic Pipe Saws PLAS In-Line Rotary Cutter Bevelers Plastic Pipe Joiners PE Squeeze-Off Tools Guillotine
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
Pipe Cutting and Beveling Machines GF 4 (AVM/MVM) Training. precision. power. simplicity.
precision. power. simplicity. Pipe Cutting and Beveling Machines GF 4 (AVM/MVM) Training Ehemals / formerly known as Georg Fischer Rohrverbindungstechnik Content 1 Basics 3 2 Range of application 11 3
MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches
ISO 9001 : 2008 Certified MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches # 3, Industrial Estate, RAJPURA - 140 401 Tel. +91 1762-224427, Fax : +91-1762-223372
Cross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
CABLE & WIRE MILBAR SAFETY WIRE PRODUCTS
MILBAR SAFETY WIRE PRODUCTS 1 - REVERSIBLE SAFETY WIRE TWISTER WITH WIRE CATCHER Milbar s new safety wire twister pliers (formally the TigerWave) offer the best of all worlds! Now you can twist safety
HIGH THROUGHPUT MINIMUM SET-UP TIME BT-Z LARGE BAR PEELERS
UPDATE ON HETRAN BT-Z LARGE BAR PEELERS: MAXIMIZING PRODUCTIVITY IRRESPECTIVE OF ALLOY, BAR OR TUBE DIAMETER! Copyright September 2013 All Rights Reserved REVOLUTIONARY WORLD-CLASS DESIGN EXTENSIVE RANGE
Assembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as
FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as you fabricate it. Our CCM is as easy to fabricate as wood:
Concrete Finishing. Flat Back Finishing Trowel. Round End Finishing Trowels. To order Concrete Finishing
Concrete Finishing Concrete Finishing To order Square End Finishing Trowels 620004 12 x 3 Square End Finishing Trowel 620006 12 x 4 Square End Finighing Trowel 620010 14 x 4 Square End Finishing Trowel
CLASS # 52 COMBINATION WRENCH SETS
COMBINATION WRENCH SETS These combination wrenches are boxed on one end and open on the other. They are drop forged, machined, heat treated, triple chrome plated and held to tight tolerances so there is
High Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
Pliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
Tube Specialty Tools
Tube Specialty Tools Just as there are different reasons for finishing the cut ends of pipe or tubing, there are different tools and methods for doing the job. 1. Often, the only reason for finishing the
Late Spiders - Forming Bubble Flares on Brake Lines
Late Spiders - Forming Bubble Flares on Brake Lines Brake lines on 30 year old cars often require replacement. In addition to the inevitable corrosion, the connections are damaged during multiple replacements
Tel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
Fasteners. For Use in. Stainless. Steel Sheets. Revised 108
Fasteners For Use in Stainless Steel Sheets Revised 108 FASTENERS FOR USE IN STAINLESS STEEL SHEETS One of the very basics of self-clinching is that the fastener must be harder than the host sheet. Only
Metal Cutting - 5. Content. Milling Characteristics. Parts made by milling Example of Part Produced on a CNC Milling Machine 7.
Content Metal Cutting - 5 Assoc Prof Zainal Abidin Ahmad Dept. of Manufacturing & Industrial Engineering Faculty of Mechanical Engineering Universiti Teknologi Malaysia 7. MILLING Introduction Horizontal
ASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
A Reference Guide. Continuous Hinge, Inventory and Service Worldwide Est End Play Design Engineering with Standard Continuous Hinges
Hinge Width Paint Clearance Knuckle Length End Play Design Engineering with Standard Continuous Hinges A Reference Guide Knuckle Dear Design Engineer or Purchasing Agent, We frequently see blueprints for
WARNING: STAY CLEAR OF AREA BEHIND AND AROUND PULLING END OF OPERATION
SAFETY PRECAUTIONS PERSONAL PROTECTION Wear all required personal protective equipment including but not limited to: Approved Safety Goggles Gloves Do not modify The Wedge without the written consent of
Pipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape
Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated
Pipe Diameter Part Number Rotary Cutter 6-63mm Rotary Cutter 10-90mm Rotary Cutter mm ips
Installers and installation equipment Installation personnel should be trained and technically competent for this jointing method. Training for installers is available free of charge on request from our
THE FULL LINE METAL SPECIALISTS
PRECISION METALS THE FULL LINE METAL SPECIALISTS 6917 West 59th Street Chicago, Illinois 60638 Phone 773/586-8503 Fax 773/586-8556 www.ksmetals.com THE USES ARE ENDLESS!!! Hobby, Craft, DIY, Artist, Architecture,
Chapter 25. Other Machining Processes. Materials Processing. MET Manufacturing Processes. Shaping Planing Broaching Sawing Filing
MET 33800 Manufacturing Processes Chapter 25 Other Machining Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Other Machining Processes Shaping
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
Product Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
BERKLEYCAT2016:112208Q qxd 2/4/16 9:25 AM Page 1
BERKLEYCAT2016:112208Q4 1007.qxd 2/4/16 9:25 AM Page 1 BERKLEYCAT2016:112208Q4 1007.qxd 2/4/16 9:25 AM Page 2 Berkley Tool is proud to offer the most comprehensive selection of replacement parts and accessories
Cutting Tools. Round Tooling TMX-TOOL Fax
Round Tooling +1-508-653-8897 844-TMX-TOOL Fax +1-508-653-5110 www.tmxtools.com 245 Quick Lookup Round Tooling DRILLS...247 ANNULAR CUTTERS...295 REAMERS...299 COUNTERBORES AND COUNTERSINKS....321 CARBIDE
Chapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
WISS HAND TOOLS (INCLUDES H.K. PORTER, LUFKIN AND NICHOLSON)
(INCLUDES H.K. PORTER, LUFKIN AND NICHOLSON) INDEX HACKSAW BLADE, BOXED BI-METALOY 12" 24 TPI (NICHOLSON)... 14-6 HVAC TOOLS CRIMPER 5-BLADE... 14-4 NOTCHER... 14-4 SEAMER... 14-5 JAB SAW MULTIPURPOSE
MODEL 36 and 52 FOOT SQUARING SHEARS OPERATION, PARTS & MAINTENANCE MANUAL. Proudly Made in the USA
MODEL 36 and 52 FOOT SQUARING SHEARS OPERATION, PARTS & MAINTENANCE MANUAL Proudly Made in the USA Model 36 and 52 Foot Squaring Shear Parts View 2 Model 36 and 52 Parts List INDEX NO. 36 52 DESCRIPTION
You can also order our FREE Rotary Draw Bending Guide wall chart.
A re you looking for the latest techniques on tube & pipe bending? Ask for our FREE Tube and Pipe Bending manual shown here. It answers a lot of questions about bending, with tips and techniques to make
MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA PHONE FAX
MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA 33637-6715 813-986-9000 PHONE 813-985-6588 FAX ASSEMBLY INSTRUCTIONS IN THE FOLLOWING INSTRUCTIONS WE WILL EXPLAIN THE ASSEMBLY
LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC TH ST. GRAND PRAIRIE, TX
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Section Q INDEX DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Q SECTION INDEX
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Cable & Bolt Cutters r o f e s s i o n a l s. Klein meets and exceeds the highest of standards to create great cable and bolt cutters. Offering greater cutting power, clean and precise cuts, and
FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Brass Fittings Innovative solutions delivered Better engineering, better selection, better results FLARE COMPRESSION CPVC IRON PIPE HOSE BARB GARDEN HOSE DRAIN/SHUT-OFF COCKS NEEDLE & HUMIDIFIER VALVES
Stanley Hand tools Stanley FatMax push-lock adjustable joint pliers. 3 piece Stanley FatMax pushlock. Stanley FatMax groove joint pliers.
Stanley FatMax push-lock adjustable joint pliers Slip-resistant Bi-Material handle for a comfortable grip. Multipurpose jaws designed to grasp flat and round objects. Push-Lock technology allows for quick
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
Bandsaw Blade Selection Guide
Bandsaw Blade Selection Guide 1. Determine Blade Length Refer to your manual for a specified length. or Stretch out an existing blade and measure it. or Set the wheels to the centre of the adjusting bolt
BI-METAL BAND SAW BLADES
BI-MTAL BAND SAW BLADS PRODUCT RANG Types Range Grade of Steel APPLICATIONS l Steel l Stainless Steel l otic l High Alloy l Non - Ferrous Material l Aluminium l Cast Iron l l Width 6. mm, 1. mm, 13. mm,
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
Summer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018
Summer/Fall 2018 Promo Sale Prices Good August 1st - October 31st, 2018 INSULATED 50 Piece Set 1000Volt proturn 32874 50 Piece Insulated Tool Set. Insulation According to VDE 0682/part 201, EN/IEC 60900,
Figure 9-1 Adjustable wrenches come in a variety of sizes
Figure 9-1 Adjustable wrenches come in a variety of sizes Figure 9-2 Combination wrenches - one end is open and the other end is boxed. Figure 9-3 Refrigerant service valve wrenches have square openings
Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces
Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight
General Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
"HAAS-TOOLS" - Profi Tools for the Plumber
- Profi Tools for the Plumber 15 15.01-15.03 Our Special Tools 15.04-15.04 Seal Cutting Case 15.05-15.07 Tools for Installing 15.08-15.09 Pipe-Planer / Pipe Cutters 15.10-15.10 Hole Drill 15.11-15.11 Saws
PTC Model 4. Programmable Turntable Controller. Basic Motor Mount Kit P/N Installation Instructions
PTC Model 4 Programmable Turntable Controller M Basic Motor Mount Kit P/N 09-820 Installation Instructions New York Railway Supply 625 Aviator Dr Fort Worth TX 76179 (817) 233-5068 http://www.nyrs.com
H.G.Cockrill Corporation
Materials experience Aluminum 2011,2024,2017 5052,6061,6063 Investment castings Sand castings (continued) H.G.Cockrill Corporation Catalog and Buyer s guide Iron and steel alloys Products, Capabilities,
Burnishing machine TRINOXFLEX Set. BSE Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool
SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 11 1.0 INTRODUCTION: 1.1 This Technical Sales Bulletin describes installation procedure of SL850 Blind-Threaded and SL854 Thru-Threaded Pull-up type inserts. These procedures use the SLPGA850
Guide to Pipe Beveling
Guide to Pipe Beveling Make Weld Ready Bevels on Pipe to Fit Your Application When welding two pieces of pipe together the ends of the pipe must be properly prepared to obtain the best possible weld joint.
Article Group 5 Chisel and Hammers
Article Group 5 Chisel and Hammers 511002 Body separation chisel 512001 Body separation chisel incl. Hand protection 518001 Hand protection for body separation chisel 511020 Bumping hammer 300g 511021