Polished head, handles black atramentised. Polished head, dip-coated handles. Length mm

Transcription

1 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO Polished head, handles black atramentised. 576 Polished head, dip-coated handles Length Length Extremely robust, balanced weight distribution, high wear resistance, handles black atramentised, head polished. Pincers (cutting pliers) DIN/ISO 9243 Special tool steel, cutting edge oil-hardened. 57 Length Length Advantageous force transmission thanks to good lever action. Polished head. Handles black atramentised. Hardness of cutting edges approx. 59 HRC. For the disassembly of car-bodies. Car-body pliers (horse shoeing pliers) DIN 5173 Special tool steel, hardened in oil and tempered. 571 Length Head width Weight 571 g Rabitz pincers Optimum cutting performance through favourable leverage. Dip-coated handles. Special tool steel, oil-hardened, polished, blackened tip Length Ground cutting edges, handles black atramentised, polished head. Rabitz pincers DIN/ISO 9242 Special tool steel, oil-hardened. 572 Length Length # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline

2 Rabitz pincers Wire twisting pliers End cutting nippers Centre cutting nippers Diagonal cutting pliers 5725 High-leverage original tower pliers (rabitz pincers) DIN/ISO 9242 Particularly slim head and long legs, optimum cutting performance with minimum use of force due to high transfer, strong damping of the cutting impact after cutting the binding wire, thereby relieving tendons and muscles. For fastening concrete reinforcing steel, twisting and cutting wire from roll within one working step. Special tool steel, oil-hardened Polished head, handles black atramentised Head and handles nickel-plated Length up to wire Ø up to wire Ø Head width 5725 soft hard Wire twisting pliers x Burnished, corrosion-proof, bright finished head. With additional cutting edge. Jaws bevelled to 3. Perfect for securing locations which are prone to suffer from vibrations. Quick and exact twisting, even stainless wires can be twisted. Suitable for any wire length, any twisting length and any number of rotations. Length up to wire Ø 575 max Vanadium-extra Serrated jaws With reversing automatic. The reversing automatic allows clockwise and counterclockwise twisting of the locking wire. The wire is twisted in one operation. When the reversing slider is in the centre position, it locks the twisting axis. Therefore, the pliers can be used as diagonal cutting pliers or grip pliers, as well High leverage end cutting nippers DIN/ISO For hardened steel wire (piano wire). Steel C 6, oil-hardened and tempered, 5728 Polished head, dip-coated handles component grips with handguard Polished head, PVC-coated handles. For piano wire and soft wire. Chrome-vanadium electric steel, oil-hardened, ß 2-ergosoft grips with handguard. ß Length up to wire Ø up to wire Ø up to wire Ø medium hard piano Fax order hotline in the catalogue. Purchase orders must be in units. # = partly extent in stock. a

3 5723 Polished head, PVC-coated handles. For hard and soft wire. Also suitable for braiding concrete reinforcing steel. End cutting nippers DIN/ISO 5748 Special tool steel, oil-hardened, Hardness of cutting edges approx. 61 HRC Length up to wire Ø up to wire Ø up to wire Ø 5723 soft medium hard Lever end cutting nippers DIN/ISO 5749 Highest cutting performance thanks to double lever mechanism and opening spring. Black atramentised For hard wire. Tool steel C6, fully forged, oil-hardened. Cutting 5724 Length Powerful, compact, comfortable. Polished head, PVC-coated handles. Good cutting capacity. Easier cutting thanks to high leverage ratio. For piano wire as well as for thick and soft wire, such as bolts and rivets. Lever-(Bolt-)end cutting nipper Vanadium electric steel, oil-hardened, cutting edges inductively hardened, hardness of cutting edges approx. 64 HRC Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø soft medium hard piano Centre cutting nipper Polished head, PVC-coated handles. With forged-in joint axis for the hardest, heaviest duty. These pliers can cut hard or thick wires with less effort than diagonal cutting pliers of the same length. With precision cutting edges for soft and hard wire as well as piano wire. Chrome-vanadium high-performance, forged, oil-hardened. Hardness of cutting edges approx. 64 HRC Length Cu conductor Aluminium conductor up to wire Ø up to wire Ø up to wire Ø up to wire Ø 5728 up to 2 up to 2 soft medium hard piano Polished head, handles plastic-coated, with opening spring. With surface-ground cutting faces. Cutting edges additionally inductively hardened. Diagonal cutting pliers for fibre-optic cable Specially for cutting fibre-optic cable. Vanadium electric steel, hardened in oil and tempered Length # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline

4 Plastic cutters Diagonal cutting pliers 5739 Plastic cutters With opening spring. Polished head, PVC-coated handles, without chamfer. With surface ground cutting edge surface. For accurate cutting of sprues on plastic parts or soft materials, e.g. lead. Vanadium electric steel, oil-hardened Cutting edges Length 5739 straight straight straight 18 # angled angled Long cutting edges for larger cut material. With precision stripping holes for (solid) conductors 1.5 and Vanadium electric steel, oil-hardened, cutting Hardness of cutting edges approx. 6 HRC Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. Stripping-Diagonal cutting pliers Multi-purpose Cutting and stripping insulation Head chrome-plated, handles with thick, bicolour, multi-component non-slip grips, routine-tested in compliance with VDE DIN EN 69. VDE Length up to wire Ø Stripping performance soft 2 / AWG / Diagonal cutting pliers DIN/ISO 5749 Special tool steel, oil-hardened and tempered, 5743 Polished head, dip-coated handles component grips with handguard ß 2-ergosoft grips with handguard Head highly polished, chrome-plated, insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles, with 2-component non-slip grips ß VDE Length up to wire Ø up to wire Ø up to wire Ø medium hard piano Fax order hotline in the catalogue. Purchase orders must be in units. # = partly extent in stock. a

5 Diagonal cutting pliers DIN/ISO 5749 Slim head shape for use in hard-to-reach working places. For hard and soft wire. Fine wires are cut cleanly along the entire cutting edge length. Vanadium electric steel, oil-hardened. Cutting edges inductively hardened. Hardness of cutting edges approx. 62 HRC Polished head, PVC-coated handles Polished head, handles with thick-walled, bicolour, multi-component non-slip grips Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips Head chrome-plated, handles with thick, bicolour, multi-component non-slip grips, routine-tested in compliance with VDE DIN EN 69. VDE Length up to wire Ø up to wire Ø up to wire Ø soft medium hard Diagonal cutting pliers DIN/ISO 5749 x Nickel-plated and chrome-plated, highly polished. Handles covered with cellulose acetate grips. With faced blades. Max. cutting capacity Piano wire. For hard and soft wire. Vanadium-extra steel Length up to wire Ø up to wire Ø soft hard Diagonal cutting pliers -ERGO- DIN 5749 x - Chrome-plated surface for additional corrosion protection - No sharp edges - 2-component handles - Optimum handle width - Less power, maximum cutting performance - Screw connection - Small shoulders - On/Off function of opening spring Chrome-vanadium steel Progressive cutting edges - Optimal cutting radius for cutting - Soft and thin materials are cut at the tip (Cu and plastic) - Hard materials are cut close to the joint (FE + and piano wire) Heavy-duty cutting edges - Withstands more than 5, cuts through hard wire - The heavy-duty cutting edges ensure a powerful cut along the entire blade - The reinforced metal frame withstands the extreme conditions and particularly hard wires Length up to wire Ø up to wire Ø up to wire Ø CU FE+ Piano Length up to wire Ø up to wire Ø up to wire Ø CU FE+ Piano # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline

6 Diagonal cutting pliers High-leverage diagonal cutting pliers DIN/ISO 5749 Steel C 6, oil-hardened and tempered, Polished head, dip-coated handles component grips with handguard Head highly polished, chrome-plated, insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles, with 2-component non-slip grips ß 2-ergosoft grips with handguard. ß VDE Length up to wire Ø up to wire Ø up to wire Ø medium hard piano For hard and soft wire, piano wire as well. For heavy-duty projects. Chrome-vanadium heavy-duty steel, forged, oil-hardened, Hardness of cutting edges approx. 64 HRC. Note Length 25 suitable for Cu-wire up to 16 2 and Al-wire up to Polished head, PVC-coated handles Polished head, handles with thick-walled, bicolour, multi-component non-slip grips. High-leverage diagonal cutting pliers DIN/ISO With opening spring, which can be engaged when necessary. Polished head, handles with thick-walled, bicolour, multi-component non-slip grips Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips Head chrome-plated, handles with thick-walled, bicolour, multi-component non-slip grips. Routine-tested according to VDE DIN EN The opening spring is easily engaged with a press of the thumb View of pliers underside with activated opening spring VDE Length up to wire Ø up to wire Ø up to wire Ø soft hard piano Fax order hotline in the catalogue. Purchase orders must be in units. # = partly extent in stock. a

7 Optimum transfer thanks to double joint construction - Extremely easy cutting with little expenditure of force cuts 5 % easier as the tried and tested KNIPEX high-leverage diagonal cutting pliers - NEW for diagonal cutting pliers The possibility of adjustment. The KNIPEX Twin Force cuts through even 4 thick wires with 2-3x repeat cuts without a great deal of effort. Standard high-leverage diagonal cutting pliers do not cut such diameters at all or only with very high effort - Little cutting impact gentle on hands, the tension on muscles and tendons is relieved - High degree of stability and zero-backlash due to precision milled forged-in axis - Pliers black atramentised, polished head KNIPEX TwinForce heavy-duty diagonal cutting pliers - Reliably cuts all types of wire, also flat material - For coarse and precision cutting - For use with a great deal of comfort, for repetitive cutting or extremely hard cutting jobs Chrome vanadium heavy-duty steel Handles covered with plastic Handles with multi-component handles Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø soft medium hard piano Compact and lightweight, powerful and precise - Box joint highest stability at low a weight - Doubly supported joint axis for the hardest, heaviest duty. - High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio - 2 % less force required compared with high-leverage diagonal cutting pliers of the same length - Large opening width for thicker cables - Cuts precisely, even through fine copper wires - Compact, low-weight construction Cuts the very finest wires as well as multi-wire cable and hard piano wire. Universally usable, in the assembly, maintenance and production. Chrome vanadium heavy-duty steel, forged, oil-hardened. Compact diagonal cutting pliers X-Cut Pliers black atramentised - Polished head - Handles with multicomponent handles Pliers chrome-plated - Handles with multicomponent handles Pliers chrome-plated - Insulated handles with multi-component handles - VDE-tested VDE Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø soft medium hard piano Ergonomic head, 25 angled - Advantageous use in all positions - Lever-optimised heavy-duty joint - Hardened precision cutting edges - Slim shape for large reach EvoLine high-leverage diagonal cutting pliers Head fine-polished, forged - Handles with 2-component grips - With handguard Head fine-polished, forged - Insulation handles (1 V) in compliance with VDE IEC 69 sprayed directly on handles - Handles with 2-component grips - With handguard VDE Length up to wire Ø up to wire Ø up to wire Ø medium hard piano # 11 # # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline

8 Diagonal cutting pliers Bolt cutters Lever diagonal cutting pliers Sturdy model with transmission and opening spring. Handles plastic-coated. For wires 12 N/ 2 up to 3.5 Ø, for wires 8 N/ 2 up to 4.5 Ø. Special tool steel, oil-hardened. Cutting Length Particularly high cutting performance with minimum effort due to highly effective joint design. The cutting forces are more than 2-x higher than the force used. 6% power savings compared to conventional high leverage diagonal cutting pliers. Chrome-vanadium heavy-duty steel, oil-hardened and tempered, cutting Hardness of cutting edges approx. 64 HRC Handles covered with plastic. Head atramentised. Compact bolt cutters KNIPEX CoBolt angled head with single-ended bracket and lateral cutting capacity for flush cutting. With space for gripping. Handles covered with plastic. Head atramentised angled head with single-ended bracket and lateral cutting capacity for flush cutting. With space for gripping. Opening spring integrated into the grip covers, with locking mechanism for comfortable operation and safe transport. Handles with bicolour multi-component grip covers. Head atramentised Handles with bicolour multi-component grip covers. Head atramentised Opening spring integrated into the grip covers, with locking mechanism for comfortable operation and safe transport. Handles with bicolour multi-component grip covers. Head atramentised. straight 2 angled straight 2 angled Length up to wire Ø up to wire Ø up to wire Ø up to wire Ø soft medium hard piano SAFETY FIRST! The current PSA catalogues 57.8 Fax order hotline in the catalogue. Purchase orders must be in units. # = partly extent in stock. a

9 57615 Small bolt cutters X Blade and pipe head drop-forged. Adjustment of blades not required. High-quality hardened and tempered. Ergonomic plastic handles. For cutting standard structural steel and steel wires up to 48 HRC. Blades made of chrome-vanadium special steel With bolt and circlip rings. Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø Bolt end eutting nippers X Angled blade head for close cutting. Blade and pipe head drop-forged. Adjustment of blades not required. High-quality hardened and tempered. Ergonomic plastic handles. For cutting standard structural steel and steel wires up to 48 HRC. Blades made of chrome-vanadium special steel With bolt and circlip rings. Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø j 5762 Exchangeable, infinitely adjustable jaws, cutting edges in the middle, tubular handles. For cutting structural steel and steel wire up to 48 HRC. Jaws made of chrome-vanadium steel. Heavy-duty bolt cutters Heavy-duty bolt cutters X Exchangeable, infinitely adjustable jaws, screwed to the handles, tubular handles. For cutting standard structural steel and steel wires up to 48 HRC. Jaws made of hardened and tempered electric cast steel, s With straps and screws. Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø With straps and screws, Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø # # # # # = partly extent in stock. a in the catalogue. Purchase orders must be in units. Fax order hotline

10 Bolt cutters Special bolt cutters for structural steel Non-sparking tools Heavy-duty bolt cutters Forged-in stopper with comfortable shockabsorber - Good access due to very flat construction of head and joint area - Ergonomically angled handles to minimise effort - Sturdy non-slip two-colour dual component handle sleeves - Precise adjustment (12 positions) by eccentric bolt - High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio - Bolted cutter head, replaceable - Head grey atramentised For hard materials up to 48 HRC. Blades Chrome vanadium heavy-duty steel, forged, oil-hardened. Cutting edges additionally inductively hardened, hardness of cutting edges approx. 62 HRC. Joint special tool steel, forged. Handles steel tube, powder-coated Complete with screws. Forged-in stopper with damping insert dampens the average cutting impact comfortably Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø # # # X 5764 Approx. 4% lighter due to high-strength aluminium multi-component handles. Small opening angle of the handles, therefore low force is necessary. The extended top blade facilitates the handling of reinforcing steel mats lying on the ground. Blade and pipe head made of special steel. Special bolt cutter for structural steel Screws included. Length 19 HRC 4 HRC 48 HRC up to Ø up to Ø up to Ø # X 5765 With multi-component handles and exchangeable knives. Substitute for cutting torch, cutting wheel and saw. High-alloyed steel, drop-forged, edges inductively hardened. Welded wire mesh and flat steel cutter Length max. Cutting force From wire dist HRC x 4 3 x Fax order hotline in the catalogue. Purchase orders must be in units. # = partly extent in stock. a