Cutting Tools. Round Tooling TMX-TOOL Fax
|
|
- Rolf Hamilton
- 5 years ago
- Views:
Transcription
1 Round Tooling TMX-TOOL Fax
2 Quick Lookup Round Tooling DRILLS ANNULAR CUTTERS REAMERS COUNTERBORES AND COUNTERSINKS CARBIDE BURRS END MILLS MILLING CUTTERS AND SAWS TAPS DIES BROACHES AND TOOLBITS INDEX The information contained herein is subject to change without notice. We do our best to maintain in stock full and complete inventories of all regular lines. Close-out items may be depleted and will be replaced with comparable merchandise subject to prior sales. Photos and drawings shown are a general representation; occasionally we may change the exterior packaging of some products. Toolmex Industrial Solutions shall not be liable for technical or editorial errors or omissions contained herein TMX-TOOL Fax
3 Drills TABLE OF CONTENTS DRILLS Drill Size & Decimal Equivalents Tap Drill Chart Solid Carbide Technical Reference Solid Carbide Jobber Drills Solid Carbide Coolant Feeding Drills HSS Jobber Drills HSS TiN Coated & Cobalt Jobber Drills Overview General Purpose HSS TiN Coated Jobber Drills Heavy Duty TiN Coated Jobber Drills Heavy Duty Cobalt Jobber Drills Drill Sets Aircraft Extension Drills Taper Shank Drills Silver and Deming Drills Spotting and Centering Drills Core Drills DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 247
4 Drill Size Equivalents Drill Size Decimal Equivalent Drill Size mm Decimal Equivalent Drill Size mm Decimal Equivalent Drill Size mm Decimal Equivalent Drill Size mm Decimal Equivalent / DRILLS / / / / A / / / / / B C / D / / / E / F / G / / H / I / / J / K / / / / / L M / / / N / / / / O / P / / / / / / Q R / S T / U / V W / / / / / / / / / / X / Y / / Z / / / / / / DRILLS Customer Service
5 Drill Technical Reference Tap Drill Chart Tap Size Drill Size Probable % thread / M1.6 x mm M2 x.4 1/ M2.5 x mm / M3 x M3.5 x M4 x mm M5 x mm M6 x / / /16-18 F /16-24 I M mm /8-16 5/ Tap Size Drill Size Probable % thread 3/8-24 Q M10 x mm /16-14 U / / M12 x / / / / / M14 x 2 15/ / / / / / / /8 37/ M16 x 2 35/ / / / / M20 x / /8-9 49/ / / M24 x 3 53/ / / / /8-7 63/ / / M30 x / / / / / / / / /64 72 M36 x 4 1-1/ / / / /64 72 DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 249
6 Solid Carbide Drills Technical Reference Speeds and Feeds for Carbide Drills DRILLS Material Group Steel Acid Resistant / Stainless Steel High Tensile Steel Cast Materials Aluminium and Aluminium Alloys Special Alloys Material Typle Cutting Speed SFM Cutting Speed SFM Cutting Speed SFM Carbide 5XD and 8XD Coolant Drills Carbide 5XD and 8XD Coolant Drills Carbide Jobber Drills Structural Steel Free Cutting Steel Unalloyed Heat Treatable Steel Unalloyed Case Hard Steel Alloyed Case Hardened Steel Nitriding Steel Stainless Steel, Sulphured Austenitic Steel, Martensitic Alloyed Heat Treatable Steel Tool Steel High Speed Steel Spring Steel Cast Iron Spheroidal Graphite and Malleable Ci Chilled Ci Aluminium Alloys Al Wrought Alloys Al Cast Alloys < 10%si Al Cast Alloys > 10%si Special Alloys Ti and Ti Alloys Copper Low Alloys Non Ferrous Metals Brass Bronze Magnesium Alloys Magnesium Alloys Minimum recommended coolant pressure: for 1/4" diameter = 400 PSI for 1/2" diameter = 200 PSI for 3/4" diameter = 150 PSI Feed Rate IPR Material Feed (inch/rev) Steel High Tensile Steels / Acid Resistant Cast Material Aluminium Alloys Titanium Alloys Non Ferrous Magnesium Alloys Recommended starting points 250 DRILLS Customer Service
7 Solid Carbide Drills 2 Flute Jobber Drills Features and Applications: materials generating high temperature Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 8 DRILLS 2 Flute Tolerance: Shank h6, Cut h7 Fractional and Metric Wire Gage Letter Metric Decimal Equiv Flute Series Fractional and Metric Sizes Series Wire Gage Sizes Uncoated /16" 3/4" /16" 3/4" /64" /16" 3/4" /16" 3/4" /16" 3/4" /4" 7/8" /4" 7/8" /4" 7/8" /4" 7/8" /16" 1" /16" 1" /2" 1-1/4" /2" 1-1/4" /2" 1-1/4" /32" /2" 1-1/4" mm mm 30mm /2" 1-1/4" /2" 1-1/4" /8" 1-3/8" /8" 1-3/8" /8" 1-3/8" /8" 1-3/8" /8" 1-3/8" mm mm 34mm /4" 1-1/2" /4" 1-1/2" /4" 1-1/2" /4" 1-1/2" mm mm 36mm /4" 1-1/2" /64" /4" 1-1/2" mm mm 38mm mm mm 38mm /4" 1-1/2" /4" 1-1/2" mm mm 40mm TMX, part of the Toolmex Industrial Solutions family DRILLS 251
8 Solid Carbide Drills 2 Flute Jobber Drills (continued) DRILLS Fractional and Metric Wire Gage Letter Metric Decimal Equiv Flute Series Fractional and Metric Sizes Series Wire Gage Sizes Uncoated 1.50mm mm 40mm /4" 1-1/2" /16" /4" 1-1/2" mm mm 43mm /4" 1-1/2" mm mm 43mm /4" 1-1/2" /8" 1-3/4" ,80mm mm 46mm /8" 1-3/4" mm mm 46mm /8" 1-3/4" /64" /8" 1-3/4" /8" 1-3/4" mm mm 49mm /8" 1-3/4" /8" 1-3/4" mm mm 49mm " 2" mm mm 53mm " 2" mm mm 53mm " 2" /32" " 2" mm mm 57mm " 2" " 2" mm mm 57mm /4" 2-1/4" /4" 2-1/4" mm mm 57mm /4" 2-1/4" mm mm 61mm /4" 2-1/4" /64" /4" 2-1/4" /4" 2-1/4" mm mm 61mm /4" 2-1/4" /4" 2-1/4" mm mm 61mm /4" 2-1/4" mm mm 61mm /4" 2-1/4" mm mm 65mm /8" /4" 2-1/4" mm mm 65mm /4" 2-1/4" mm mm 65mm mm mm 70mm /8" 2-1/2" mm mm 70mm DRILLS Customer Service
9 Solid Carbide Drills 2 Flute Jobber Drills (continued) Fractional and Metric Wire Gage Letter Metric Decimal Equiv. Flute Series Fractional and Metric Sizes Series Wire Gage Sizes Uncoated /8" 2-1/2" /64" /8" 2-1/2" mm mm 70mm /8" 2-1/2" mm mm 70mm /8" 2-1/2" /8" 2-1/2" mm mm 75mm /8" 2-1/2" mm mm 75mm /8" 2-1/2" /32" /8" 2-1/2" /8" 2-1/2" mm mm 75mm /8" 2-1/2" /8" 2-1/2" mm mm 75mm mm mm 75mm /8" 2-3/4" mm mm 80mm /8" 2-3/4" /64" /8" 2-3/4" /8" 2-3/4" mm mm 80mm /8" 2-3/4" mm mm 80mm /8" 2-3/4" mm mm 80mm /8" 2-3/4" mm mm 80mm /8" 2-3/4" /16" /8" 2-3/4" mm mm 86mm /8" 2-3/4" /8" 2-3/4" mm mm 86mm /8" 2-3/4" /4" 3" mm mm 86mm /4" 3" mm mm 86mm /4" 3" /64" /4" 3" /4" 3" mm mm 86mm /4" 3" mm mm 86mm /4" 3" mm mm 93mm /4" 3" mm mm 93mm DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 253
10 Solid Carbide Drills 2 Flute Jobber Drills (continued) DRILLS Fractional and Metric Wire Gage Letter Metric Decimal Equiv. Flute Series Fractional and Metric Sizes Series Wire Gage Sizes Uncoated Series Letter Sizes 7/32" /4" 3" mm mm 93mm /4" 3" mm mm 93mm /4" 3" mm mm 93mm mm mm 93mm A " 3-1/4" /64" " 3-1/4" mm mm 93mm B " 3-1/4" mm mm 101mm C " 3-1/4" mm mm 101mm D " 3-1/4" mm mm 101mm /4" E " 3-1/4" mm mm 101mm mm mm 101mm F " 3-1/4" mm mm 101mm G /8" 3-1/2" mm mm 101mm /64" /8" 3-1/2" H /8" 3-1/2" mm mm 109mm mm mm 109mm I /8" 3-1/2" mm mm 109mm J /8" 3-1/2" mm mm 109mm K /8" 3-1/2" /32" /8" 3-1/2" mm mm 109mm mm mm 109mm L /8" 3-1/2" mm mm 109mm M /8" 3-3/4" mm mm 109mm /64" /8" 3-3/4" mm mm 117mm N /8" 3-3/4" mm mm 117mm mm mm 117mm mm mm 117mm /16" /8" 3-3/4" mm mm 117mm O /8" 3-3/4" mm mm 117mm mm mm 117mm P /8" 3-3/4" DRILLS Customer Service
11 Solid Carbide Drills 2 Flute Jobber Drills (continued) Fractional and Metric Wire Gage Letter Metric Decimal Equiv. Flute Series Fractional and Metric Sizes Series Letter Sizes Uncoated 8.30mm mm 117mm /64" /2" 4" mm mm 117mm Q /2" 4" mm mm 117mm mm mm 125mm R /2" 4" mm mm 125mm /32" /2" 4" mm mm 125mm S /2" 4" mm mm 125mm mm mm 125mm T /2" 4" mm mm 125mm /64" /4" 4-1/4" mm mm 125mm mm mm 125mm U /4" 4-1/4" ,40mm mm 125mm mm mm 125mm /8" /4" 4-1/4" V /4" 4-1/4" mm mm 133mm mm mm 133mm mm mm 133mm W /8" 4-1/2" mm mm 133mm /64" /8" 4-1/2" mm mm 133mm X /8" 4-1/2" mm mm 133mm Y /8" 4-1/2" mm mm 133mm /32" /8" 4-1/2" Z /8" 4-1/2" mm mm 133mm /64" /8" 4-1/2" mm mm 142mm /16" /8" 4-1/2" mm mm 142mm /64" " 4-3/4" /32" " 4-3/4" mm mm 151mm /64" " 4-3/4" mm mm 151mm /2" " 4-3/4" mm mm 151mm mm mm 151mm /32" " 6" mm mm 160mm DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 255
12 Solid Carbide Drills 2 Flute Jobber Drills (continued) DRILLS Fractional and Metric Wire Gage Letter Metric Decimal Equiv. Flute Series Fractional and Metric Sizes Uncoated 14.00mm mm 160mm /16" " 6" mm mm 169mm mm mm 153mm /32" " 6" mm mm 178mm /8" " 6" mm mm 178mm mm mm 184mm /32" " 6" mm mm 184mm /16" " 6" mm mm 191mm mm mm 191mm /32" " 6" mm mm 191mm mm mm 191mm /4" " 6" / " 6" mm mm 191mm /8" " 6" " " 6" DRILLS Customer Service
13 Solid Carbide Drills 2 Flute High Performance Coolant Feeding Drills 5xD Features and Applications: over entire cutting edge and high temperature materials Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 8 DRILLS 2 Flute Tolerance: Shank h6, Cut h7 Drill Shank Flute Series Fractional TiAlN coated 1/4 1/4 2-5/64 3-9/ /64 5/16 2-5/64 3-9/ /32 5/16 2-5/64 3-9/ /64 5/16 2-5/64 3-9/ /16 5/16 2-5/64 3-9/ /64 3/8 2-3/8 4-3/ /32 3/8 2-3/8 4-3/ /64 3/8 2-3/8 4-3/ /8 3/8 2-3/8 4-3/ /64 7/ /32 4-3/ /32 7/ /32 4-5/ /64 7/ /32 4-5/ /16 7/ /32 4-5/ /64 1/2 3-1/32 4-7/ /32 1/2 3-1/32 4-7/ /64 1/2 3-1/32 4-7/ /2 1/2 3-1/32 4-7/ /64 9/16 3-1/32 4-7/ /32 9/16 3-1/32 4-7/ /64 9/16 3-1/32 4-7/ /16 9/16 3-1/32 4-7/ /64 5/8 3-17/64 5-1/ /32 5/8 3-17/64 5-1/ /64 5/8 3-17/64 5-1/ /8 5/8 3-17/64 5-1/ /64 11/16 3-5/8 5-5/ /32 11/16 3-5/8 5-5/ /64 11/16 3-5/8 5-5/ /16 11/16 3-5/8 5-5/ /64 3/4 3-31/ /32 3/4 3-31/ /64 3/4 3-31/ /4 3/4 3-31/ TMX, part of the Toolmex Industrial Solutions family DRILLS 257
14 Solid Carbide Coolant Drills 2 Flute High Performance Coolant Feeding Drills 5xD (continued) Drill Shank Flute Series Metric TiAlN coated DRILLS Metric DRILLS Customer Service
15 Solid Carbide Coolant Drills 2 Flute High Performance Coolant Feeding Drills 8xD Features and Applications: Aluminium Carbon Alloy over entire cutting edge Alloy Steel Steel abrasive and high temperature materials Excellent Good 2 Flute Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 8 DRILLS Tolerance: +.000/ Metric=h7 Drill Shank Flute Series Metric TiAlN coated TMX, part of the Toolmex Industrial Solutions family DRILLS 259
16 HSS Jobber Drills Twist Drills and Drill Sets DRILLS Fractional meters Straight Shank High Speed Steel Black Oxide Sold in the following package quantities: 1/64" thru 17/64" = 10/envelope 6/32" thru 1/2" = 5/envelope over 1/2" = 1/tube Twist Drill Sets Inches Flute HSS GP Fractional Decimal 1/ /16 3/ / /2 1-3/ / /4 1-3/ / /8 1-7/ / / /4 2-1/ / /2 2-5/ / /8 2-3/ / /4 2-7/ / / / /8 3-1/ / /16 3-1/ / /16 3-5/ / /2 3-3/ / /8 3-7/ / / / /8 4-1/ / /16 4-1/ / /16 4-3/ / /16 4-1/ / /16 4-5/ / /16 4-3/ / /2 4-7/ / / / /4 5-1/ / /8 5-1/ / /16 5-1/ / /16 5-5/ / /16 5-5/ / /16 5-3/ / /8 5-7/ / / / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /8 7-5/ / /8 7-5/ / /8 7-5/ / /8 7-5/ / /8 7-5/ / /8 7-5/ / /8 8-1/ / /8 8-1/ Set Size Sizes Included in Kit Case HSS GP 13 Piece 1/16" to 1/4" by 64ths Metal Case Piece 1/16" to 1/2" by 32nds Plastic Case Piece 1/16" to 1/2" by 64ths Plastic Case See page 225 for all our drill sets 260 DRILLS Customer Service
17 HSS Jobber Drills Twist Drills and Drill Sets Wire Gage meters Straight Shank High Speed Steel Black Oxide Size Decimal Flute OAL HSS GP /8 3/ /8 3/ /16 7/ /16 7/ /16 7/ / / /16 1-1/ /16 1-1/ /8 1-1/ /8 1-1/ /2 1-3/ /2 1-3/ /2 1-3/ /2 1-3/ /8 1-1/ /8 1-1/ /8 1-1/ /8 1-1/ /16 1-5/ /16 1-5/ /16 1-5/ /16 1-5/ /4 1-3/ /4 1-3/ /8 1-7/ /8 1-7/ /8 1-7/ /8 1-7/ /8 2-1/ /8 2-1/ /8 2-1/ /4 2-1/ /4 2-1/ /8 2-3/ /8 2-3/ /8 2-3/ /16 2-1/ /16 2-1/ /16 2-1/ Size Decimal Flute OAL HSS GP /2 2-5/ /2 2-5/ /2 2-5/ /8 2-3/ /8 2-3/ /8 2-3/ /4 2-7/ /4 2-7/ / / / / / / /8 3-1/ /8 3-1/ /8 3-1/ /8 3-1/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-1/ /16 3-1/ /16 3-1/ /16 3-5/ /16 3-5/ /16 3-5/ /16 3-5/ /2 3-3/ /2 3-3/ /2 3-3/ /2 3-3/ /8 3-7/ /8 3-7/ Sold in the following packages quanitites: All wire gage diameters are 10 / pack Twist Drill Sets Set Size Sizes Included in Kit Case HSS GP 60 Piece 1 to 60 Complete Metal DRILLS Sold in the following packages quanitites: All wire gage diameters are 10 / pack See page 225 for all our drill sets TMX, part of the Toolmex Industrial Solutions family DRILLS 261
18 HSS Jobber Drills Twist Drills and Drill Sets DRILLS Letter meters Straight Shank Size Decimal Equiv. Flute HSS GP A /8 3-7/ B / C / D / E / F /8 4-1/ G /8 4-1/ H /8 4-1/ I /8 4-1/ J /8 4-1/ K /16 4-1/ L /16 4-1/ M /16 4-3/ N /16 4-3/ O /16 4-1/ P /16 4-5/ Q /16 4-3/ R /16 4-3/ S /2 4-7/ T /2 4-7/ U / V / W /4 5-1/ X /4 5-1/ Y /8 5-1/ Z /8 5-1/ Sold in the following package quanitites: A thru I = 10/envelope J thru Z = 5/envelope 26 Piece Drill Sets Sizes Included in Kit Case HSS GP A to Z Complete included Piece 3-in-1 Master Drill Sets Sizes Included in Kit Case HSS GP Fractional: 1/16" to 1/4" by 64ths Wire Gage: #1 to #60 Complete Letter: A to Z Complete included See page 39 for additional drill sets 262 DRILLS Customer Service
19 HSS Jobber Drills Twist Drills Metric meters Straight Shank mm inch Flute mm mm Part Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube mm inch Flute mm mm Part DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 263
20 HSS Jobber Drills Twist Drills (continued) Metric meters Straight Shank DRILLS mm inch Flute mm Part Sold in package the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube mm inch Flute mm Part DRILLS Customer Service
21 HSS and Cobalt Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point The basic all purpose drill of the industry just got better, TiN coatings offers the ability to increase speeds and feeds with extended tool life DRILLS Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point For rugged applications that do not require the heat retention properties of Cobalt, this heavy duty drill is a great economical alternative to Cobalt, the TiN coating offers wear and heat resistance as well as increased surface hardness resulting in the ability to run at higher speeds and feeds. In addition to the TiN coating the split point feature reduces walking with its self centering ability Heavy Duty Cobalt Jobber Drills with 135º Split Point Cobalt offers increase heat resistance. Recommended for drilling high temperature Alloys such as Titanium and high Nickel Alloys All jobber drills sold in the following package quantities: Fractional: Letter: thru 17/64" = 10/envelope 9/32" thru 1/2" = 5/envelope over 1/2" = 1/tube A thru I = 10/envelope J thru Z = 5/envelope Wire: all = 10/envelope Metric: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube TMX, part of the Toolmex Industrial Solutions family DRILLS 265
22 HSS TiN Coated Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point Fractional meters DRILLS Sold in the following package quantities: 1/64" thru 17/64" = 10/envelope 6/32" thru 1/2" = 5/envelope over 1/2" = 1/tube Fractional Decimal Equivalent Flute OAL 1/ /16 3/ / /2 1-3/ / /4 1-3/ / /8 1-7/ / / /4 2-1/ / /2 2-5/ / /8 2-3/ / /4 2-7/ / / / /8 3-1/ / /16 3-1/ / /16 3-5/ / /2 3-3/ / /8 3-7/ / / / /8 4-1/ / /16 4-1/ / /16 4-3/ / /16 4-1/ / /16 4-5/ / /16 4-3/ / /2 4-7/ / / / /4 5-1/ / /8 5-1/ / /16 5-3/ / /16 5-1/ / /16 5-5/ / /16 5-3/ / /8 5-7/ / / / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /8 7-5/ / /8 7-5/ DRILLS Customer Service
23 HSS TiN Coated Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point Wire Gage meters Wire Gage Decimal Equivalent Flute OAL /8 3/ /8 3/ /16 7/ /16 7/ /16 7/ / / /16 1-1/ /16 1-1/ /8 1-1/ /8 1-1/ /2 1-3/ /2 1-3/ /2 1-3/ /2 1-3/ /8 1-1/ /8 1-1/ /8 1-1/ /8 1-1/ /16 1-5/ /16 1-5/ /16 1-5/ /16 1-5/ /4 1-3/ /4 1-3/ /8 1-7/ /8 1-7/ /8 1-7/ /8 1-7/ /8 2-1/ /8 2-1/ /8 2-1/ /4 2-1/ /4 2-1/ /8 2-3/ Wire Gage Decimal Equivalent Flute OAL /8 2-3/ /8 2-3/ /16 2-1/ /16 2-1/ /16 2-1/ /2 2-5/ /2 2-5/ /2 2-5/ /8 2-3/ /8 2-3/ /8 2-3/ /4 2-7/ /4 2-7/ / / / / / / /8 3-1/ /8 3-1/ /8 3-1/ /8 3-1/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-1/ /16 3-1/ /16 3-1/ /16 3-5/ /16 3-5/ /16 3-5/ /16 3-5/ /2 3-3/ /2 3-3/ /2 3-3/ /2 3-3/ /8 3-7/ /8 3-7/ DRILLS Sold in the following packages quanitites: All wire gage diameters are 10 / pack TMX, part of the Toolmex Industrial Solutions family DRILLS 267
24 HSS TiN Coated Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point Letter meters DRILLS Sold in the following package quanitites: A thru I = 10/envelope J thru Z = 5/envelope Letter Decimal Equivalent Flute OAL A /8 3-7/ B / C / D / F /8 4-1/ G /8 4-1/ H /8 4-1/ I /8 4-1/ J /8 4-1/ K /16 4-1/ L /16 4-1/ M /16 4-3/ N /16 4-3/ O /16 4-1/ P /16 4-5/ Q /16 4-3/ R /16 4-3/ S /2 4-7/ T /2 4-7/ U / V / W /4 5-1/ X /4 5-1/ Y /8 5-1/ Z /8 5-1/ DRILLS Customer Service
25 HSS TiN Coated Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point Metric meters Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL Metric Decimal Equivalent Flute OAL DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 269
26 HSS TiN Coated Jobber Drills General Purpose HSS TiN Coated Jobber Drills with 118º Point (continued) Metric meters DRILLS Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL Metric Decimal Equivalent Flute OAL DRILLS Customer Service
27 HSS TiN Coated Jobber Drills Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point Fractional meters Sold in the following package quantities: 1/64" thru 17/64" = 10/envelope 6/32" thru 1/2" = 5/envelope over 1/2" = 1/tube Fractional Decimal Equivalent Flute OAL DRILLS 1/ /8 1-7/ / / /4 2-1/ / /2 2-5/ / /8 2-3/ / /4 2-7/ / / / /8 3-1/ / /16 3-1/ / /16 3-5/ / /2 3-3/ / /8 3-7/ / / / /8 4-1/ / /16 4-1/ / /16 4-3/ / /16 4-1/ / /16 4-5/ / /16 4-3/ / /2 4-7/ / / / /4 5-1/ / /8 5-1/ / /16 5-3/ / /16 5-1/ / /16 5-5/ / /16 5-3/ / /8 5-7/ / / / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /8 7-5/ / /8 7-5/ TMX, part of the Toolmex Industrial Solutions family DRILLS 271
28 HSS Heavy Duty TiN Coated Jobber Drills Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point Wire Gage meters DRILLS Wire Gage Decimal Equivalent Flute OAL /8 1-7/ /8 2-1/ /8 2-1/ /8 2-1/ /4 2-1/ /4 2-1/ /8 2-3/ /8 2-3/ /8 2-3/ /16 2-1/ /16 2-1/ /16 2-1/ /2 2-5/ /2 2-5/ /2 2-5/ /8 2-3/ /8 2-3/ /8 2-3/ /4 2-7/ /4 2-7/ / / / / / / /8 3-1/ /8 3-1/ /8 3-1/ /8 3-1/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-1/ /16 3-1/ /16 3-1/ /16 3-5/ /16 3-5/ /16 3-5/ /16 3-5/ /2 3-3/ /2 3-3/ /2 3-3/ /2 3-3/ /8 3-7/ /8 3-7/ Sold in the following packages quanitites: All wire gage diameters are 10 / pack 272 DRILLS Customer Service
29 HSS Heavy Duty TiN Coated Jobber Drills Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point Letter meters Sold in the following package quanitites: A thru I = 10/envelope J thru Z = 5/envelope Letter Decimal Equivalent Flute OAL DRILLS A /8 3-7/ B / C / D / F /8 4-1/ G /8 4-1/ H /8 4-1/ I /8 4-1/ J /8 4-1/ K /16 4-1/ L /16 4-1/ M /16 4-3/ N /16 4-3/ O /16 4-1/ P /16 4-5/ Q /16 4-3/ R /16 4-3/ S /2 4-7/ T /2 4-7/ U / V / W /4 5-1/ X /4 5-1/ Y /8 5-1/ Z /8 5-1/ TMX, part of the Toolmex Industrial Solutions family DRILLS 273
30 HSS Heavy Duty TiN Coated Jobber Drills DRILLS Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point (continued) Metric meters Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL Metric Decimal Equivalent Flute OAL DRILLS Customer Service
31 HSS Heavy Duty TiN Coated Jobber Drills Heavy Duty HSS TiN Coated Jobber Drills with 135º Split Point (continued) Metric meters Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL Metric Decimal Equivalent Flute OAL DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 275
32 Cobalt Jobber Drills Heavy Duty Cobalt Jobber Drills with 135º Split Point Fractional meters DRILLS Sold in the following package quantities: 1/64" thru 17/64" = 10/envelope 6/32" thru 1/2" = 5/envelope over 1/2" = 1/tube Fractional Decimal Equivalent Flute OAL 1/ /16 3/ / /2 1-3/ / /4 1-3/ / /8 1-7/ / / /4 2-1/ / /2 2-5/ / /8 2-3/ / /4 2-7/ / / / /8 3-1/ / /16 3-1/ / /16 3-5/ / /2 3-3/ / /8 3-7/ / / / /8 4-1/ / /16 4-1/ / /16 4-3/ / /16 4-1/ / /16 4-5/ / /16 4-3/ / /2 4-7/ / / / /4 5-1/ / /8 5-1/ / /16 5-3/ / /16 5-1/ / /16 5-5/ / /16 5-3/ / /8 5-7/ / / / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 6-5/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /16 7-1/ / /8 7-5/ / /8 7-5/ DRILLS Customer Service
33 Cobalt Jobber Drills Heavy Duty Cobalt Jobber Drills with 135º Split Point Wire Gage meters Wire Gage Decimal Equivalent Flute OAL /16 1-5/ /16 1-5/ /16 1-5/ /4 1-3/ /4 1-3/ /8 1-7/ /8 1-7/ /8 1-7/ /8 1-7/ /8 2-1/ /8 2-1/ /8 2-1/ /4 2-1/ /4 2-1/ /8 2-3/ /8 2-3/ /8 2-3/ /16 2-1/ /16 2-1/ /16 2-1/ /2 2-5/ /2 2-5/ /2 2-5/ /8 2-3/ /8 2-3/ Wire Gage Decimal Equivalent Flute OAL /8 2-3/ /4 2-7/ /4 2-7/ / / / / / / /8 3-1/ /8 3-1/ /8 3-1/ /8 3-1/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-3/ /16 3-1/ /16 3-1/ /16 3-1/ /16 3-5/ /16 3-5/ /16 3-5/ /16 3-5/ /2 3-3/ /2 3-3/ /2 3-3/ /2 3-3/ /8 3-7/ /8 3-7/ DRILLS Sold in the following packages quanitites: All wire gage diameters are 10 / pack TMX, part of the Toolmex Industrial Solutions family DRILLS 277
34 Cobalt Jobber Drills Heavy Duty Cobalt Jobber Drills with 135º Split Point Letter meters DRILLS Sold in the following package quanitites: A thru I = 10/envelope J thru Z = 5/envelope Letter Decimal Equivalent Flute OAL A /8 3-7/ B / C / D / F /8 4-1/ G /8 4-1/ H /8 4-1/ I /8 4-1/ J /8 4-1/ K /16 4-1/ L /16 4-1/ M /16 4-3/ N /16 4-3/ O /16 4-1/ P /16 4-5/ Q /16 4-3/ R /16 4-3/ S /2 4-7/ T /2 4-7/ U / V / W /4 5-1/ X /4 5-1/ Y /8 5-1/ Z /8 5-1/ DRILLS Customer Service
35 Cobalt Jobber Drills Heavy Duty Cobalt Jobber Drills with 135º Split Point Metric meters Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " Metric Decimal Equivalent Flute OAL " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " " DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 279
36 Cobalt Jobber Drills Heavy Duty Cobalt Jobber Drills with 135º Split Point (continued) Metric meters DRILLS Sold In the following package quantities: thru 6.7 mm = 10/envelope 6.8 mm thru mm = 5/envelope over mm = 1/tube Metric Decimal Equivalent Flute OAL Metric Decimal Equivalent Flute OAL DRILLS Customer Service
37 HSS and Cobalt Jobber Drills Sets General Purpose HSS Black Oxide Jobber Drills with 118º Point of pieces in the Set Sizes included in Set 15 1/16 to 1/2 by 32 rds /16 to 1/2 by 64 ths # 1 thru # A to Z /16 to 1/2 by 64 ths + #1 to # 60 + A to Z mm to 10.0 mm by mm to 13.0 mm by DRILLS General Purpose HSS TiN Coated Jobber Drills with 118º Point of pieces in the Set Sizes included in Set 15 1/16 to 1/2 by 32 rds /16 to 1/2 by 64 ths # 1 thru # A to Z mm to 10.0 mm by mm to 13.0 mm by Heavy Duty HSS TiN Coated Jobber Drills with 135º Point of pieces in the Set Sizes included in Set 15 1/16 to 1/2 by 32 rds /16 to 1/2 by 64 ths Heavy Duty Cobalt Jobber Drills with 135º Point of pieces in the Set Sizes included in Set 15 1/16 to 1/2 by 32 rds /16 to 1/2 by 64 ths # 1 thru # A to Z mm to 10.0 mm by mm to 13.0 mm by TMX, part of the Toolmex Industrial Solutions family DRILLS 281
38 Aircraft Extension Drills 6" OAL Heavy Duty HSS Black Oxide with 135º Split Point for Self Centering Fractional meters DRILLS Fractional Decimal Equivalent Flute 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Aircraft Extension Drills are sold in the following package quantities: Fractional: thru 17/64" = 10/envelope or tube 15/64" thru 11/32" = 5/envelope or tube 23/64" and larger = 1/tube 282 DRILLS Customer Service
39 Aircraft Extension Drills 6" OAL Heavy Duty HSS Black Oxide with 135º Split Point for Self Centering Wire Gage meters Wire Gage Decimal Equivalent Flute / / / / / / / / / / / / / / / / / / / / / Wire Gage Decimal Equivalent Flute / / / / / / / / / / / / / / / / / / / / / / / Aircraft Extension Drills are sold in the following package quantities: Wire Gage: all = 10/envelope or tube DRILLS 12" OAL Heavy Duty HSS Black Oxide with 135º Split Point for Self Centering Fractional meters Fractional Decimal Equivalent Flute Fractional Decimal Equivalent Flute 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Aircraft Extension Drills are sold in the following package quantities: Fractional: thru 17/64" = 10/envelope or tube 15/64" thru 11/32" = 5/envelope or tube 23/64" and larger = 1/tube TMX, part of the Toolmex Industrial Solutions family DRILLS 283
40 Aircraft Extension Drills 12" OAL Heavy Duty HSS Black Oxide with 135º Split Point for Self Centering Wire Gage meters DRILLS Wire Gage Decimal Equivalent Flute / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Aircraft Extension Drills are sold in the following package quantities: Wire Gage: all = 10/envelope or tube 284 DRILLS Customer Service
41 HSS Taper Shank Drills Twist Drills with Standard Taper Shanks Taper Shank Fractional meter Twist Drills Inches Decimal Flute Morse Taper Shank Size Part 1/ /8 5-1/ / /8 5-3/ / /8 5-3/ / /2 5-3/ / /2 5-3/ / / / / / /8 6-1/ / /8 6-1/ / / / / / /8 6-3/ / /8 6-3/ / /4 6-1/ / /4 6-1/ / /2 6-3/ / /2 6-3/ / / / / / /8 7-1/ / /8 7-1/ / /8 7-1/ / /8 7-1/ / /8 8-1/ / /8 8-1/ / /8 8-1/ / /8 8-1/ / /8 8-3/ / /8 8-3/ / /8 8-3/ / /8 8-3/ / /8 8-3/ / /8 8-3/ / / / / / /8 9-1/ / /8 9-1/ / /8 9-1/ / /8 9-1/ / /8 9-3/ / /8 9-3/ / / / / / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ / /8 10-3/ Inches Decimal Flute Morse Taper Shank Size Part 61/ / / / / / / / /2 11-1/ / /2 11-1/ / /8 11-1/ / /8 11-1/ / /8 12-3/ / /8 12-3/ / /4 12-7/ / /4 12-7/ / / / / / /2 13-1/ / /8 13-1/ / /2 14-1/ / /2 14-1/ / /8 14-1/ / /8 14-1/ / /4 14-3/ / /4 14-3/ / /8 14-1/ / /8 14-1/ / / / / / /8 14-3/ / /8 14-3/ / /4 14-7/ / /4 14-7/ / / / / / / /8 17-1/ / /8 17-1/ / /8 17-3/ / /8 17-3/ /8 17-3/ / /8 17-3/ / /4 17-3/ / /4 17-3/ / /4 17-3/ / /8 17-3/ / /8 17-3/ / /8 17-3/ / /4 18-3/ / /4 18-3/ / /8 19-1/ / /8 19-1/ / /4 20-3/ / /8 21-1/ / DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 285
42 HSS Taper Shank Drills Twist Drills with Smaller or Larger Taper Shanks DRILLS Taper Shank Fractional meter Twist Drills Inches Decimal Flute Morse Taper Shank Size Part 1/ /8 7-3/ / / / / / /8 8-1/ / /8 8-1/ / / / / / / / / / / / / / / / / / / /8 11-1/ / /8 11-3/ / /8 11-3/ / /4 11-7/ / /4 11-7/ Inches Decimal Flute Morse Taper Shank Size Part 1-3/ / / /2 12-1/ / /8 12-1/ / / / / / /8 15-1/ / / / /8 15-3/ / /8 15-3/ / /8 16-1/ / /8 16-1/ / /8 16-1/ / /8 16-1/ / /8 16-1/ / /2 16-1/ / /2 16-1/ / /8 16-5/ / /8 16-5/ /8 16-5/ Stub Taper Shank Drills Size Morse Taper OAL / / / / / / / / / / / / / / / / / / / / Size Morse Taper OAL 2-7/ / / / / / / / / / / / / DRILLS Customer Service
43 HSS Taper Shank Drills Twist Drills with Standard Taper Shanks DIN 345 Taper Shank Metric meters Decimal Flute Morse Taper Shank Size Part Decimal Flute Morse Taper Shank Size Part DRILLS Twist Drills with Larger Taper Shanks DIN 346 Taper Shank Metric meters Decimal Flute Morse Taper Shank Size Part TMX, part of the Toolmex Industrial Solutions family DRILLS 287
44 Silver and Deming Drills Sets Silver and Deming Drills DRILLS 1/2 meter Shanks Fractional Sizes Fraction Drill Size Inches Decimal HSS Cobalt 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / DRILLS Customer Service
45 Silver and Deming Drills Sets Silver and Deming Drills 1/2 meter Shanks Fractional Sizes (continued) Fraction Drill Size Inches Decimal HSS Cobalt 1-1/ / / / / / / / / / / / / / / / / DRILLS Silver and Deming Drills 3/4 meter Shanks Fractional Sizes Drill Size Inches Fraction Decimal 25/ / / / / / / / / / / / / / / / / / / / Drill Size Inches Fraction Decimal 1-7/ / / / / / / / / / / / / / / / / / TMX, part of the Toolmex Industrial Solutions family DRILLS 289
46 Silver and Deming Drills Sets Silver and Deming Drills DRILLS 1/2 meter Shanks Metric Sizes Size Drill Size mm Decimal 12.5 MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM Size Drill Size mm Decimal 25.5 MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM MM DRILLS Customer Service
47 Silver and Deming Drills Sets Silver and Deming Drill Sets DRILLS 5 Piece Drill Sets Sizes: 1, 1-1/8, 1-1/4, 1-3/8 & 1-1/2 Sets Include Hardwood Block Description Piece Drill Sets Sizes: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1 Sets include case Description Piece Drill Sets Sizes: 17/32, 9/16, 19/32, 5/8, 21/32, 11/16, 23/32, 3/4, 13/16, 7/8, 15/16 & 1 Sets Include Hardwood Block Description Piece Drill Sets Sizes: 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 & 1 Sets Include Hardwood Block Description TMX, part of the Toolmex Industrial Solutions family DRILLS 291
48 HS Spotting and Centering Drills Spotting and Centering Drills DRILLS Body Inches Inches Flute Inches 90 Degree 118 Degree Right Hand Right Hand 1/8 1-1/4 3/ /16 1-3/8 1/ /4 1-1/2 5/ /16 1-1/2 5/ / / / /8 2-1/4 1-1/ /4 2-1/4 1-1/ /8 2-1/2 1-1/ /2 1-1/ / / / NC Spotting Drills Body Inches Inches Flute Inches 90 Degree 120 Degree 1/4 2-1/2 3/ /4 4 3/ /4 6 3/ /8 3-1/8 1-1/ / / / / /2 3-3/4 1-3/ / / / / /8 4-3/8 1-5/ / / / / / / / / / / / / / DRILLS Customer Service
49 HSS Core Drills Core Drills Taper Shank Inches Shank Taper Flute Part 13/ / / /8 7-1/ / /8 8-1/ / /8 8-1/ / /8 8-3/ / /8 8-3/ / /8 8-3/ / / / /8 9-1/ / /8 9-1/ / /8 9-3/ / / / / / /8 10-3/ / /8 10-3/ / /8 10-3/ / / / / / / /8 12-1/ / /8 12-3/ / /4 12-7/ / / / /2 13-1/ / / / / /2 14-1/ / /8 14-1/ / /8 14-1/ Inches Shank Taper Flute Part 1-7/ /8 14-3/ / / / /8 16-3/ / /8 16-5/ / /8 16-7/ / / /8 17-1/ / /8 17-1/ / /8 17-1/ / /8 17-1/ / /8 17-1/ / /8 17-3/ / /8 17-3/ / /8 17-3/ / /8 17-3/ /8 17-3/ / /8 17-3/ / /4 17-3/ / /4 17-3/ / /8 17-3/ / /4 18-3/ / /4 18-3/ / /8 19-1/ / /4 20-3/ / /4 20-3/ / /8 21-1/ / /8 21-1/ DRILLS TMX, part of the Toolmex Industrial Solutions family DRILLS 293
50 HSS Core Drills Core Drills Straight Shank DRILLS Inches Flute Part Inches Flute Part 1/4 3-1/2 6-1/ /64 3-3/4 6-1/ /32 3-7/8 6-1/ / / /64 4-1/8 6-1/ /32 4-1/8 6-1/ /8 4-1/4 6-3/ /32 4-3/ /64 4-5/8 7-1/ /16 4-5/8 7-1/ /32 4-3/4 7-1/ /2 4-3/4 7-3/ /64 4-3/ /32 4-3/ /16 4-7/8 8-1/ /32 4-7/8 8-3/ /8 4-7/8 8-3/ / /32 5-1/ /16 5-3/8 9-1/ /32 5-5/8 9-1/ /4 5-7/8 9-3/ / / /32 9-7/ / / / / / / / / / / / / /8 6-1/ / /4 6-5/ / /2 6-7/ /8 11-3/4 7-1/ / / /4 12-1/2 7-7/ / /8 8-1/ / /4 8-5/ / /8 8-3/ / / / /8 9-1/ /8 15-5/8 9-7/ / / /4 16-1/4 10-1/ /8 16-1/2 10-3/ / /8 10-3/ /8 10-3/ DRILLS Customer Service
51 Annular Cutters TABLE OF CONTENTS ANNULAR CUTTERS Technical Reference Annular Cutters Annular Cutter Holders ANNULAR CUTTERS TMX, part of the Toolmex Industrial Solutions family ANNULAR CUTTERS 295
52 Annular Cutters Technical Reference Speeds and Feeds Annular Cutters ANNULAR CUTTERS Material being Cut Hardness (Brinell) SFM Steels: Carbon Steel Soft Alloyed Steels Medium Alloyed Steels Hard Alloyed Steels Tool Steels ( D2, H13) Stainless - Ferritic (400 series) Stainless - Austenitic (300 series) Stainless - Austenitic (300 series) Cast Iron: Soft Medium Aluminum Wrought Cast Cast Copper SFM = Surface Feet per Minute RPM (Revolutions per Minute) = (SFM *3.82) / Cutter meter (inches) Feed: Inches per Minute = # of teeth(flutes) X Feed Rate per Tooth X RPM 296 ANNULAR CUTTERS Customer Service
53 Annular Cutters Annular Cutters for both inch and metric cutters other standard hole cutting systems Inch Sizes of Flutes 1 inch Depth 2 inch Depth 3 inch Depth Set of 5 Pieces ANNULAR CUTTERS Ejector Pilots Description TMX, part of the Toolmex Industrial Solutions family ANNULAR CUTTERS 297
54 Annular Cutter Holders Annular Cutter Holders ANNULAR CUTTERS Type Shank Size Inches Straight Shank 3 Flats Cutter Shank Size Inches Gage Inches Part HEN HEN HEN HEN Type Shank Size Inches Straight Shank 2 Flats Cutter Shank Size Inches Gage Inches Part HEN Morse Taper Shank HEN-3 MT HEN-3-6 MT HEN-4 MT HEN-4-6 MT HEN-4-12 MT HEN-8 MT R8 Shank HEN ANNULAR CUTTERS Customer Service
55 Reamers TABLE OF CONTENTS REAMERS Technical Reference Straight Shank Chucking Reamers Taper Shank Chucking Reamers Expansion Chucking Reamers Hand Reamers Expansion Hand Reamers Bridge Reamers Adjustable Blade Reamers Taper Pin Reamers Car Reamers Taper Pipe Reamers Shell Reamers REAMERS TMX, part of the Toolmex Industrial Solutions family REAMERS 299
56 Reamer Technical Reference Recommended Feeds and Speeds for HSS Finish Reamering REAMERS Material being Cut Hardness (Brinell) SFM Feed Rate (In.) per Flute Aluminum Brass & Bronze Bronze High Tensil Cast Iron Soft Cast Iron Mediun Hard Cast Iron Chilled Malleable Cast iron Plain Carbon Steel Alloyed Steel Tool Steel Stainless Free machining Stainless 300 series Stainless PH Calculations: RPM s = (3.82 X SFM)/ reamer diameter in inches Inches per Min (IPM) = Feed per flute X # of flutes X RPM Tech Tips: 300 REAMERS Customer Service
57 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Fractional Sizes Fractional Size Decimal Size Shank Flute of Flutes HSS Part Cobalt Part 1/ /2 21/ / / / /8 31/ / /8 31/ / /8 31/ / / / /8 41/ / /8 41/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / REAMERS Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" TMX, part of the Toolmex Industrial Solutions family REAMERS 301
58 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Fractional Sizes (continued) REAMERS Fractional Size Decimal Size Shank Flute of Flutes HSS Part Cobalt Part 11/ / / / / / / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / / / / / / / / / / / / / / / / / /4 10-1/ /4 10-1/ / /4 10-1/ / /4 10-1/ / / / / / / / / / / / / / / / / / / / /2 12-1/ / /2 12-1/ / / / / / / / Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" 302 REAMERS Customer Service
59 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Letter Sizes Letter Sizes Decimal Letter Sizes: A thru Z Shank Flute of Flutes A / B / C / D / / F / G / H / I / J / K / L / M / N / / P / Q / / S / T / U / V / / X / Y / Z / REAMERS Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" TMX, part of the Toolmex Industrial Solutions family REAMERS 303
60 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Wire Gage Sizes REAMERS Decimal Wire Gage Sizes: 1 thru 32 Shank Flute of Flutes / / / / / / / / / / / /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 4-1/ /8 3-1/ /8 3-1/ /8 3-1/ Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" 304 REAMERS Customer Service
61 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Metric Sizes mm Flute Shank DIN 212/A Part mm Flute Shank DIN 212/A Part REAMERS TMX, part of the Toolmex Industrial Solutions family REAMERS 305
62 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Straight Flute Decimal Sizes Size # Flutes Flute Size # Flutes Flute REAMERS /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" /8" 3-1/2" " 4" " 4" " 4" " 4" " 4" " 4" " 4" " 4" " 4" " 4" " 4" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /8" 4-1/2" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /4" 5" /2" 6" /2" 6" /2" 6" Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" 306 REAMERS Customer Service
63 Straight Shank Chucking Reamers Chucking Reamers (continued) Straight Shank, Straight Flute Decimal Sizes Size # Flutes Flute Size # Flutes Flute /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" REAMERS Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" TMX, part of the Toolmex Industrial Solutions family REAMERS 307
64 Straight Shank Chucking Reamers Chucking Reamers (continued) Straight Shank, Straight Flute Decimal Sizes Size # Flutes Flute Size # Flutes Flute REAMERS /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /2" 6" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" /4" 7" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" " 8" /4" 9" /4" 9" /4" 9" /4" 9" /4" 9" /4" 9" /2" 9-1/2" /2" 9-1/2" /2" 9-1/2" /2" 9-1/2" Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" 308 REAMERS Customer Service
65 Straight Shank Chucking Reamers Chucking Reamers Straight Shank, Spiral Flute Fractional Sizes Fractional Sizes Decimal Sizes Shank Flute of Flutes 1/ /8 3-1/ / / / /8 4-1/ / /8 4-1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / / / / / / /4 10-1/ / /4 10-1/ / /4 10-1/ / / / / / / / / / / / / / /2 12-1/ Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" REAMERS TMX, part of the Toolmex Industrial Solutions family REAMERS 309
66 Taper Shank Chucking Reamers Chucking Reamers Taper Shank, Straight and Helical Flute Fractional Sizes REAMERS Fractional Sizes Decimal Sizes Flute of Flutes Taper Shank Straight Flute Part Helical Flute Part 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / /2 9-1/ / /2 9-1/ / /2 9-1/ / /2 9-1/ / / / / / / / / /4 10-1/ / /4 10-1/ / /4 10-1/ / /4 10-1/ / / / / / / / / / / / / / / / / / /2 12-1/ / /2 12-1/ / / / / / / / / Chucking Reamer meter Tolerances Up to and including ¼": " to " Over ¼" to include 1": " to " Over 1": " to.0006" 310 REAMERS Customer Service
67 Taper Shank Chucking Reamers Chucking Reamers Taper Shank, Straight Flute Metric Sizes mm Flute of Flutes Morse Taper Shank DIN 208/A REAMERS TMX, part of the Toolmex Industrial Solutions family REAMERS 311
68 Expansion Chucking Reamers Expansion Chucking Reamers REAMERS Sizes Flute Taper Shank Straight Shank of Fractional Decimal Flutes Taper Shank 3/ / / / / / / / / / / / / / / / / / / / / / / / / / /8 9-1/ / / /8 9-1/ / / /8 9-1/ / / / / / / / / / / /8 10-1/ / / /8 10-1/ / / /8 10-1/ / / /4 10-1/ / / / / / / / / / / / / /8 11-1/ / /8 11-1/ / / / / / /8 12-1/ / / /8 12-1/ / / / / / /8 13-1/ / / /8 13-1/ / / / /2 1-15/ / / / / / /4 14-1/ / /4 14-1/ / / /4 15-1/ NOTE: Recommended Expansion Limit = x Outside meter 312 REAMERS Customer Service
69 Straight Shank Hand Reamers Hand Reamers Straight Shank, Straight and Left Hand Helical Flutes Fractional Sizes Inches Flute of Flutes Straight Flute Part LH Helical Flute Part 1/8 1-1/ /64 1-5/8 3-1/ /32 1-5/8 3-1/ /64 1-3/4 3-1/ /16 1-3/4 3-1/ /32 1-7/8 3-3/ / /32 2-1/8 4-1/ /16 2-1/4 4-1/ /32 2-3/8 4-3/ /64 2-1/2 4-3/ /8 2-1/ /32 2-5/8 5-1/ /16 2-3/4 5-1/ /32 2-7/8 5-3/ / / /32 3-1/8 6-1/ /16 3-1/4 6-1/ /32 3-3/8 6-3/ /8 3-1/ / /16 7-3/ /16 3-7/8 7-3/ /32 4-1/16 8-1/ /4 4-3/16 8-3/ /32 4-3/8 8-3/ /16 4-9/16 9-1/ / /16 9-3/ /8 4-7/8 9-3/ / /16 5-1/8 10-1/ /32 5-5/ / / / /16 5-5/8 11-1/ /8 5-13/ / / /4 6-1/8 12-1/ /16 6-1/4 12-1/ /8 6-5/ / /16 6-7/ / /2 6-1/ REAMERS TMX, part of the Toolmex Industrial Solutions family REAMERS 313
70 Straight Shank Hand Reamers Hand Reamers Straight Shank, Straight and Left Hand Helical Flutes Metric Sizes REAMERS mm Flute of Flutes Straight Flute DiN 206/A LH Helical Flute DiN 206/B REAMERS Customer Service
71 Straight Shank Hand Reamers Expansion Hand Reamers inches Flute of Flutes Straight Flute Part Helical Flute Part 5/16 1-3/ / / / / /16 2-1/ /32 2-1/ / / / /4 3-1/ / / /8 4-3/4 10-1/ / /2 5-1/ REAMERS Recommended Expansion Limit = 0.01 x Outside meter Maximum Expansion Limit: meters 5/16 thru 15/32 =.006 meters 1/2 thru 7/8 =.010 meters 1 thru 1-1/2 =.012 meters over 1-1/2 =.015 TMX, part of the Toolmex Industrial Solutions family REAMERS 315
72 Bridge and Adjustable Reamers Bridge Reamers REAMERS Inches Approx at point Flute of Flutes Shank Taper Straight Flute Part Helical Flute Part 5/16 11/64 4-3/8 8-1/ /32 7/32 4-3/8 8-1/ /16 17/64 4-3/8 8-1/ /32 9/32 5-1/ /2 5/16 5-1/ /32 11/32 5-1/ /16 3/8 5-1/ /8 25/64 6-1/ /16 13/32 7-1/8 11-3/ /4 15/32 7-3/ /16 35/64 7-3/ /8 39/64 7-3/ /16 43/64 7-3/ /64 7-3/ /16 13/16 7-3/ /8 55/64 7-3/ /16 59/64 7-3/ /4 63/64 7-3/ /16 1-1/16 7-3/ /8 1-1/8 7-3/ /16 1-3/16 7-3/ /2 1-1/4 7-3/ /16 1-1/4 7-3/ /8 1-3/8 7-3/ /16 1-3/8 7-3/ /4 1-7/16 7-3/ /16 1-7/16 7-3/ /8 1-1/2 7-3/ /16 1-1/2 7-3/ /4 7-3/ Adjustable Blade Reamers Size Size Range OAL of Blades Part 8/A 1/4 to 9/32 3-1/ /A 9/32 to 5/16 3-3/ /A 5/16 to 11/ /A 11/32 to 3/8 4-1/ /A 3/8 to 3/32 4-1/ /A 13/32 to 7/16 4-3/ /A 7/16 to 15/ A 15/32 to 17/32 5-1/ B 17/32 to 19/32 5-3/ C 19/32 to 21/32 6-1/ D 21/32 to 23/32 6-3/ Size Size Range OAL of Blades Part 23/32 to 25/32 7-1/ F 25/32 to 27/32 7-3/ G 27/32 to 15/16 8-1/ H 15/16 to 1-1/16 8-3/ I 1-1/16 to 1-3/ J 1-3/16 to 1-11/ K 1-11/32 to 1-1/ L 1-1/2 to 1-13/ M 1-13/16 to 2-7/ N 2-7/32 to 2-3/ /4 to 3-11/ REAMERS Customer Service
73 Taper Pin Reamers Taper Pin Reamers A B C Size of Small End of Large End Flute Straight Flute A Slow Helical Flute B High Helical Flute C 5/ /16 2-3/ / /16 2-5/ / /16 2-5/ / /16 2-9/ / / / / /16 3-3/ / / /16 4-1/ /16 4-5/ /16 5-7/ /16 6-5/ /16 7-3/ /16 8-5/ /16 9-5/ REAMERS Taper Pin Reamers, Metric Size of Small End of Large End Flute of Flutes Straight Flute DiN 9/A Slow Helical Flute DiN 9/B TMX, part of the Toolmex Industrial Solutions family REAMERS 317
74 Car Reamers Car Reamers Hex Shank Reamer Hex Shank Flute Part 11/16 1-1/16 4-1/2 6-1/ /16 1-1/ /16 1-7/ /16 1-5/ REAMERS 3 Equal Flat Straight Shank Reamer Shank Shank Flute Part 5/16 5/16 1-1/2 2-3/4 4-5/ /8 3/8 1-1/2 2-3/4 4-5/ /16 7/16 1-1/2 3-1/2 5-3/ /2 1/2 1-1/ / /16 1/2 1-1/ / /8 1/2 1-1/2 4-1/2 6-3/ /16 1/2 1-1/2 4-1/2 6-3/ /4 1/2 1-1/ / /16 1/2 1-1/ / /8 1/2 1-1/ / /16 1/2 1-1/ / /2 1-1/ / /16 1/2 1-1/ / Taper Shank Reamer Morse Shank Flute Part 5/16 No /4 5-11/ /8 No /4 5-11/ /16 No /2 6-15/ /2 No / /16 No / /16 No /2 8-13/ /4 No / /16 No / /16 No / No / /16 No / REAMERS Customer Service
75 Taper Pipe Reamers Taper Pipe Reamers Size Large End Small End Flute of Flutes Straight Flute Part 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Straight REAMERS Size Large End Small End Flute of Flutes Helical Flute Part 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Helical TMX, part of the Toolmex Industrial Solutions family REAMERS 319
76 Shell Reamers Shell Reamers Straight Flute Helical Flute LH 10 REAMERS Hole Fitting Straight Flute Helical Flute of Flutes Arbor 13/16 2-1/2 1/ /8 2-1/2 1/ /16 2-1/2 1/ /2 1/ /16 2-3/4 5/ /8 2-3/4 5/ /16 2-3/4 5/ /4 2-3/4 5/ /16 3 3/ /8 3 3/ /16 3 3/ /2 3 3/ /16 3 3/ /8 3 3/ /16 3-1/ /4 3-1/ /16 3-1/ /8 3-1/ /16 3-1/ / /16 3-3/4 1-1/ /8 3-3/4 1-1/ /16 3-3/4 1-1/ /4 3-3/4 1-1/ /16 3-3/4 1-1/ /8 3-3/4 1-1/ /16 3-3/4 1-1/ /2 3-3/4 1-1/ / / / / / / / / / / / / / / / /16 4-1/2 1-3/ /8 4-1/2 1-3/ /16 4-1/2 1-3/ /4 4-1/2 1-3/ /16 4-1/2 1-3/ /8 4-1/2 1-3/ /16 4-1/2 1-3/ /2 4-1/2 1-3/ / / / / / / / REAMERS Customer Service
77 Counterbores and Countersinks TABLE OF CONTENTS COUNTERBORES AND COUNTERSINKS Technical Reference Fillister Head Counterbores Capscrew Counterbores Combined Drill and Countersinks Countersinks COUNTERBORES / COUNTERSINKS TMX, part of the Toolmex Industrial Solutions family COUNTERBORES AND COUNTERSINKS 321
78 Counterbores and Countersinks Technical Reference Counterboring and Countersinking Recommended starting points for Speeds and Feeds Speed Material Speed (SFM) Mild Steel Alloy Steel Cast Iron - Soft Brass COUNTERBORES / COUNTERSINKS Feed Cutting Major meter Inch per Rev. 1/4 to 3/ /16 to 5/ /16 to 7/ /16 to 1-3/ /4 to 1-1/ COUNTERBORES AND COUNTERSINKS Customer Service
79 Capscrew Counterbores Fillister Head Counterbores Screw Size Pilot Size Shank Part / / / / / Pilot and Cutting Size Shank Part 1/4 x 13/32 5/16 3-5/ /16 x 15/32 3/ /8 x 19/32 7/16 4-3/ /16 x 21/32 1/2 4-3/ /2 x 25/32 9/16 5-1/ Piece Set 1/4 thru 1/2 in Box Capscrew Counterbores Cap Screw Size Pilot Cutter Shank Part # / # / #8 11/64 19/64 1/ #10 13/64 21/64 5/16 3-1/ /4 9/32 13/32 3/ /16 11/32 1/2 7/ /8 13/32 19/32 1/ /16 15/32 11/16 1/ /2 17/32 25/32 1/2 7-1/ /2 17/32 25/32 3/4 7-1/ /2 9/16 13/16 3/4 7-1/ /8 21/32 31/32 3/4 7-1/ /8 11/16 1 3/4 7-1/ /4 13/16 1-3/ /8 15/16 1-3/ /16 1-9/ Piece Set: 6-1/2 Metal Case COUNTERBORES / COUNTERSINKS TMX, part of the Toolmex Industrial Solutions family COUNTERBORES AND COUNTERSINKS 323
80 Capscrew Counterbores Capscrew Counterbores, Metric Sizes Cap Screw Size * Taper Shank Pilot mm Cutter mm Shank inches inches Part M / M /16 3-1/ M /8 4-1/ M / M / M / M /2 7-1/ M14* / M16* M20* Piece Set: 3 thru 12 mm, Includes Metal Case COUNTERBORES / COUNTERSINKS Capscrew Counterbores, Fractional Sizes Cap Screw Size Pilot Cutter Shank Taper inches Part 1/4 9/32 13/32 5-3/ /16 11/32 1/ /8 13/32 19/32 6-1/ /16 15/32 11/ /2 17/32 25/32 7-1/ /8 21/32 31/32 7-1/ /4 13/16 1-3/ /8 15/16 1-3/ /16 1-9/ Flute Solid Capscrew Counterbore Sets Set Description Part 1/4, 5/16,3/8,1/2, #6, #8 & # ,4,5,6,8,10 & 12 mm COUNTERBORES AND COUNTERSINKS Customer Service
81 Countersinks Combined Drill and Countersinks Size Body Drill Drill Cobalt / / /8 1/32 1/32 1-1/ /8 3/64 3/64 1-1/ /16 5/64 5/64 1-7/ /4 7/64 7/ /16 1/8 1/8 2-1/ /16 3/16 3/16 2-3/ /2 7/32 7/ /8 1/4 1/4 3-1/ /4 5/16 5/16 3-1/ /8 11/32 11/32 3-5/ /8 3/8 3-3/ Piece Set: #1 thru # Size Body Drill Drill 60º 11 1/8 3/64 3/64 1-1/ /16 1/16 1/16 1-7/ /4 3/32 3/ /16 7/64 7/64 2-1/ /16 5/32 5/32 2-3/ /2 3/16 3/ /8 7/32 7/32 3-1/ /4 1/4 1/4 3-1/ Size Shank mm OAL mm Part Size Body Drill Drill Part 1 1/8 3/64 3/ /8 3/64 3/ /8 3/64 3/ /8 3/64 3/ /16 5/64 5/ /16 5/64 5/ /16 5/64 5/ /4 7/64 7/ /4 7/64 7/ /4 7/64 7/ /16 1/8 1/ /16 1/8 1/ /16 1/8 1/ /2 3/8 9/64 9/ /2 3/8 9/64 9/ /2 3/8 9/64 9/ /16 3/16 3/ /16 3/16 3/ /16 3/16 3/ /2 7/32 7/ /2 7/32 7/ /8 1/4 1/ /8 1/4 1/ /4 5/16 5/ COUNTERBORES / COUNTERSINKS TMX, part of the Toolmex Industrial Solutions family COUNTERBORES AND COUNTERSINKS 325
82 Countersinks 6 Flute Machine Countersinks COUNTERBORES / COUNTERSINKS of Mill of Shank /16 3/ /4 1/ /16 1/ /8 1/ /2 1/ /8 1/ /4 1/ /8 1/ / /4 3/ /2 3/ / Piece Set: 1/4 to Piece Set: 1/4 to Piece Set: 1/4 to 1-1/ Piece Set: 3/16 to 1-1/ Zero Flute Countersinks and Deburring Tools Size Range of Hole Small Large Shank /16 15/64 1/ /32 13/32 1/ /16 17/32 1/ /16 25/32 1/ /16 1-1/16 1/ /8 1-15/32 1/ /4 1-3/4 5/ / /4 2-1/2 3/ Set of 5 Pieces Set of 5 Pieces COUNTERBORES AND COUNTERSINKS Customer Service
83 Countersinks Single Flute Countersinks Size Shank Shank /16 3/16 3/4 1-1/ /4 1/4 3/ /16 1/ /8 1/ /2 1/ /8 3/8 1-1/8 2-3/ /8 1/2 1-1/8 2-3/ /4 3/8 1-5/16 2-3/ /4 1/2 1-5/16 2-3/ /8 1/2 1-5/16 2-3/ /2 1-5/16 2-3/ /4 3/4 1-5/8 3-3/ /2 3/4 1-5/8 3-1/ /4 1-5/8 3-3/ Piece Set: 1/4 to Piece Set: 3/16 to Piece Set: 3/16 to Flute Reamer Countersinks Size Shank Shank /4 3/16 3/4 1-1/ /8 1/4 7/8 1-3/ /2 3/ /8 3/ / /4 1/2 1-1/4 2-5/ /2 1-1/4 2-3/ /4 3/4 1-1/ /2 3/4 1-1/ /4 1-1/4 3-1/ Piece Set: 1/4 to Piece Set: 1/4 to COUNTERBORES / COUNTERSINKS 4 Flute Machine Countersinks Size Shank Shank /2 1/2 2-1/4 3-7/ /8 1/2 2-1/ /4 1/2 2-1/4 4-1/ /8 1/2 2-1/4 4-1/ /2 2-1/4 4-3/ /4 1/2 2-1/ /2 1/2 2-1/4 5-3/ TMX, part of the Toolmex Industrial Solutions family COUNTERBORES AND COUNTERSINKS 327
84 Countersinks Countersink Sets Single Flute Countersink Sets Set Size Piece: 1/4 to Piece: 3/16 to Piece: 3/16 to Piece Set Includes: 1/4, 3/8, 1/2, 3/4, and 1 9 Piece Set Includes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, and 1 12 Piece Set Includes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4, 1-1/2, and 2 COUNTERBORES / COUNTERSINKS 3 Flute Center Countersink Sets Set Size Piece: 1/4 to Piece: 1/4 to Piece Set Includes: 1/4, 3/8, 1/2, 3/4, and 1 6 Piece Set Includes: 1/4, 3/8, 1/2, 5/8, 3/4 and 1 6 Flute Machine Countersink Sets Set Size Piece: 1/4 to Piece: 1/4 to Piece: 1/4 to 1-1/ Piece: 3/16 to 1-1/ Piece Set Includes: 1/4, 3/8, 1/2, 3/4, and 1 8 Piece Set Includes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, and 1 10 Piece Set Includes: 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4, and 1-1/2 11 Piece Set Includes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 7/8, 1, 1-1/4, and 1-1/2 328 COUNTERBORES AND COUNTERSINKS Customer Service
85 Carbide Burrs TABLE OF CONTENTS CARBIDE BURRS Technical Reference Carbide Burrs CARBIDE BURRS TMX, part of the Toolmex Industrial Solutions family CARBIDE BURRS 329
86 Carbide Burrs Technical Reference Recommended Speeds for Carbide Headed Burrs Double cut burrs are not recommended for machining aluminum, zinc or plastic Burr meter RPM 3/16" 30,000 1/4" - 3/8" 25,000 7/16-1/2" 20,000 5/8" - 3/4' 15,000 1" 12,000 CARBIDE BURRS 330 CARBIDE BURRS Customer Service
87 Carbide Burrs Cylinder Shape End Cut (SB) Shape and Size Cutting Shank of Cut Double Cut 1/8 1/8 9/16 1-1/ /16 1/4 5/ 2-1/ /4 1/8 3/16 1-5/ /4 1/4 5/8 2-1/ /16 1/4 3/4 2-1/ /8 1/4 3/4 2-1/ /2 1/ / /8 1/ / /4 1/ / / / Cylinder Shape Radius End (SC) Shape and Size Cutting Shank of Cut Double Cut 3/32 1/8 7/16 1-1/ /8 1/8 1/2 1-1/ /16 1/4 5/8 2-1/ /4 1/8 1/ /4 1/4 5/ /16 1/4 3/4 2-1/ /8 1/4 3/4 2-1/ /2 1/ / /8 1/ / /4 1/ / Ball Shape (SD) CARBIDE BURRS Shape and Size Cutting Shank of Cut Double Cut 3/32 1/8 3/32 1-1/ /8 1/8 1/8 1-1/ /16 1/4 5/ /4 1/8 1/4 1-3/ /4 1/4 1/ /16 1/4 5/16 2-1/ /8 1/4 3/8 2-1/ /2 1/4 1/2 2-1/ /8 1/4 5/8 2-3/ /4 1/4 3/4 2-1/ TMX, part of the Toolmex Industrial Solutions family CARBIDE BURRS 331
88 Carbide Burrs Oval (SE) Tree Shape Radius End (SF) Shape and Size Cutting Shank of Cut Double Cut 1/8 1/8 7/32 1-1/ /4 1/8 3/8 1-1/ /4 1/4 3/8 2-1/ /8 1/4 5/8 2-1/ /2 1/4 7/8 2-1/ Shape and Size Cutting Shank of Cut Double Cut 1/8 1/8 1/2 1-1/ /4 1/8 1/ /4 1/4 3/4 2-1/ /8 1/4 3/4 2-1/ /2 1/ / /8 1/ / /4 1/ / Tree Shape Pointed End (SG) Flame (SH) CARBIDE BURRS Shape and Size Cutting Shank of Cut Double Cut 1/8 1/8 1/2 1-1/ /4 1/4 3/4 2-1/ /16 1/4 3/4 2-1/ /8 1/4 3/4 2-1/ /2 1/ / /8 1/ / /4 1/ / Taper Shape Radius End (SL) Shape and Size Cutting Shape and Size Cutting Shank of Cut Double Cut 1/8 1/8 1/4 1-1/ /4 1/4 1/2 2-3/ /16 1/4 3/4 2-5/ /2 1/4 1-1/ /8 1/4 1-7/16 3-3/ /4 1/4 1-5/8 3-3/ Shank of Cut Included Angle Double Cut 1/8 1/8 1/ / /4 1/4 5/ / /16 1/4 7/ / /8 1/ / /2 1/4 1-1/ / /8 1/4 1-5/ / Cone Shape (SM) Shape and Size Cutting Shank of Cut Included Angle Double Cut 1/4 1/4 3/ / /8 1/4 7/ / /2 1/ / CARBIDE BURRS Customer Service
89 End Mills TABLE OF CONTENTS END MILLS SOLID CARBIDE Technical Reference Single End, Square Single End, Ball Nose Double End, Square Double End, Weldon Variable Helix, Corner Variable Helix, Sharp and Ball Nose Flute, 45, Corner Radius and 3 Flute for Aluminum Roughing Drill Mills END MILLS HSS AND COBALT 2 Flute Multiple Flute Roughing TMX, part of the Toolmex Industrial Solutions family END MILLS 333
90 Solid Carbide End Mills Technical Reference Speeds and Feeds for Solid Carbide End Mills Variable Helix End Mills END MILLS Material SFM Chip Load Per Tooth 1/8 1/4 1/2 1 Aluminum Alloys Carbon Steel Cast Iron Copper Alloys Steel Annealed Steel Rc Steel Rc Stainless Steel Free Machining Stainless Steel Other Inconel/Monel Titanium Carbide Roughing End Mills Material SFM Chip Load Per Tooth Example Under 32 HRc Over 32 HRc 1/4 3/8 1/2 Carbon Steel , 11, 13xx Alloy Steel , 41, 42xx Grey Cast Iron Ductile Cast Iron SS 300 Series , 316, 304L SS 400 Series , 420F Precipitation Steel PH,16-6PH High Temp. Alloys Inconel Material SFM Chip Load Per Tooth Example Under 32 HRc Over 32 HRc 5/8 3/4 1 Carbon Steel , 11, 13xx Alloy Steel , 41, 42xx Grey Cast Iron Ductile Cast Iron SS 300 Series , 316, 304L SS 400 Series , 420F Precipitation Steel PH,16-6PH High Temp. Alloys Inconel End Mills for Aluminum Material SFM Chip Load Per Tooth 1/8 1/4 5/16 3/8 1/2 5/8 3/4 1 Aluminum Alloys Brass/Bronze Copper Alloys Plastics Note: All speeds and feeds are suggested starting points. They may be increased or decreased depending on machine condition, depth of cut, finished required, coolant, etc. 334 END MILLS Customer Service
91 Solid Carbide End Mills 2 Flute Single End Square End Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium END MILLS Tolerance: Shank dia: h6 and Cutting dia: h10 2 Flute 2 Flute Standard Fractional meters Square End Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/32 1/8 1/8 1-1/ /64 1/8 1/8 1-1/ /16 1/8 3/16 1-1/ /64 1/8 1/4 1-1/ /32 1/8 3/8 1-1/ /64 1/8 3/8 1-1/ /8 1/8 1/2 1-1/ /64 3/16 9/ /32 3/16 9/ /64 3/16 5/ /16 3/16 5/ /64 1/4 5/8 2-1/ /32 1/4 5/8 2-1/ /64 1/4 3/4 2-1/ /4 1/4 3/4 2-1/ /64 5/16 3/4 2-1/ /32 5/16 3/4 2-1/ /64 5/16 13/16 2-1/ /16 5/16 13/16 2-1/ /32 3/ / /8 3/ / /32 7/ / /16 7/ / /2 1/ /16 9/16 1-1/8 3-1/ /8 5/8 1-1/4 3-1/ /16 3/4 1-3/ /4 3/4 1-1/ /8 7/8 1-1/ / TMX, part of the Toolmex Industrial Solutions family END MILLS 335
92 Solid Carbide End Mills 2 Flute Long and Extra Long Fractional meters Square End END MILLS Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/8 1/8 3/4 2-1/ /8 1/ /8 1/8 1-1/ /16 3/16 3/4 2-1/ /16 3/16 1-1/ /16 3/16 1-1/ /16 3/16 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /4 1/4 2-1/ /16 5/16 1-1/ /16 5/16 1-5/ /16 5/16 2-1/ /8 3/8 1-1/ /8 3/8 1-3/ /8 3/8 1-1/ /16 7/ /16 7/ /2 1/ /2 1/ /2 1/2 1-1/ /2 1/ /8 5/8 2-1/ /8 5/ /4 3/4 2-1/ /4 3/ / END MILLS Customer Service
93 Solid Carbide End Mills 2 Flute Standard Metric meters Square End Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated END MILLS TMX, part of the Toolmex Industrial Solutions family END MILLS 337
94 Solid Carbide End Mills 4 Flute Single End Square End END MILLS Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium Shank tolerance h6 and Cutting dia to mm 4 Flute 4 Flute Standard Fractional meters Square End Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/32 1/8 1/8 1-1/ /64 1/8 1/8 1-1/ /16 1/8 3/16 1-1/ /64 1/8 1/4 1-1/ /32 1/8 3/8 1-1/ /64 1/8 3/8 1-1/ /8 1/8 1/2 1-1/ /64 3/16 9/ /32 3/16 9/ /64 3/16 5/ /16 3/16 5/ /64 1/4 5/8 2-1/ /32 1/4 5/8 2-1/ /64 1/4 3/4 2-1/ /4 1/4 3/4 2-1/ /64 5/16 3/4 2-1/ /32 5/16 3/4 2-1/ /64 5/16 13/16 2-1/ /16 5/16 13/16 2-1/ /32 3/ / /8 3/ / /32 7/ / /16 7/ / /2 1/ /16 9/16 1-1/8 3-1/ /8 5/8 1-1/4 3-1/ /16 3/4 1-3/ /4 3/4 1-1/ /8 7/8 1-1/ / END MILLS Customer Service
95 Solid Carbide End Mills 4 Flute Long and Extra Long s Fractional meters Square End Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/8 1/8 3/4 2-1/ /8 1/ /8 1/8 1-1/ /16 3/16 3/4 2-1/ /16 3/16 1-1/ /16 3/16 1-1/ /16 3/16 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /4 1/4 2-1/ /16 5/16 1-1/ /16 5/16 1-5/ /16 5/16 2-1/ /8 3/8 1-1/ /8 3/8 1-3/ /8 3/8 1-1/ /8 3/8 2-1/ /16 7/ /16 7/ /2 1/ /2 1/ /2 1/2 1-1/ /2 1/ /2 1/ /8 5/8 2-1/ /8 5/ /8 5/ /4 3/4 2-1/ /4 3/ / END MILLS TMX, part of the Toolmex Industrial Solutions family END MILLS 339
96 Solid Carbide End Mills 4 Flute Standard Metric meters Square End END MILLS Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated END MILLS Customer Service
97 Solid Carbide End Mills 2 Flute Single End Ball Nose Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium END MILLS Shank tolerance h6 and Cutting dia to mm 2 Flute 2 Flute Standard Fractional meters Ball Nose Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/32 1/8 1/8 1-1/ /64 1/8 1/8 1-1/ /16 1/8 3/16 1-1/ /64 1/8 1/4 1-1/ /32 1/8 3/8 1-1/ /64 1/8 3/8 1-1/ /8 1/8 1/2 1-1/ /64 3/16 9/ /32 3/16 9/ /64 3/16 5/ /16 3/16 5/ /64 1/4 5/8 2-1/ /32 1/4 5/8 2-1/ /4 1/4 3/4 2-1/ /32 5/16 3/4 2-1/ /16 5/16 13/16 2-1/ /32 3/ / /8 3/ / /32 7/ / /16 7/ / /2 1/ /16 9/16 1-1/8 3-1/ /8 5/8 1-1/4 3-1/ /16 3/4 1-3/ /4 3/4 1-1/ /8 7/8 1-1/ / TMX, part of the Toolmex Industrial Solutions family END MILLS 341
98 Solid Carbide End Mills 2 Flute Long and Extra Long s Ball Nose END MILLS Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/8 1/8 3/4 2-1/ /8 1/ /16 3/16 3/4 2-1/ /16 3/16 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /16 5/16 1-1/ /16 5/16 1-5/ /16 5/16 1-1/ /8 3/8 1-1/ /8 3/8 1-3/ /16 7/ /2 1/ /2 1/ /8 5/8 2-1/ /8 5/ /4 3/4 2-1/ /4 3/ / Flute Standard Metric meters Ball Nose Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated END MILLS Customer Service
99 Solid Carbide End Mills 4 Flute Single End Ball Nose Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium END MILLS Shank tolerance h6 and Cutting dia to mm 4 Flute 4 Flute Standard Fractional meters Ball Nose Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/32" 1/8" 1/8" 1-1/2" /64" 1/8" 1/8" 1-1/2" /16" 1/8" 3/16" 1-1/2" /64" 1/8" 1/4" 1-1/2" /32" 1/8" 3/8" 1-1/2" /64" 1/8" 3/8" 1-1/2" /8" 1/8" 1/2" 1-1/2" /64" 3/16" 9/16" 2" /32" 3/16" 9/16" 2" /64" 3/16" 5/8" 2" /16" 3/16" 5/8" 2" /64" 1/4" 5/8" 2-1/2" /32" 1/4" 5/8" 2-1/2" /64" 1/4" 3/4" 2-1/2" /4" 1/4" 3/4" 2-1/2" /64" 5/16" 3/4" 2-1/2" /32" 5/16" 3/4" 2-1/2" /64" 5/16" 13/16" 2-1/2" /16" 5/16" 13/16" 2-1/2" /32" 3/8" 1" 2-1/2" /8" 3/8" 1" 2-1/2" /32" 7/16" 1" 2-3/4" /16" 7/16" 1" 2-3/4" /2" 1/2" 1" 3" /16" 9/16" 1-1/8" 3-1/2" /8" 5/8" 1-1/4" 3-1/2" /16" 3/4" 1-3/8" 4" /4" 3/4" 1-1/2" 4" /8" 7/8" 1-1/2" 4" " 1" 1-1/2" 4" TMX, part of the Toolmex Industrial Solutions family END MILLS 343
100 Solid Carbide End Mills 4 Flute Long and Extra Long s Ball Nose END MILLS Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated 1/8 1/8 3/4 2-1/ /8 1/ /16 3/16 3/4 2-1/ /16 3/16 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /4 1/4 1-1/ /16 5/16 1-1/ /16 5/16 1-5/ /8 3/8 1-1/ /8 3/8 1-3/ /8 3/8 1-1/ /16 7/ /2 1/ /2 1/ /2 1/2 1-1/ /2 1/ /8 5/8 2-1/ /8 5/ /8 5/ /4 3/4 2-1/ /4 3/ /4 3/ / Flute Standard Metric meters Ball Nose Cut Shank of Cut Series Flute uncoated Series Flute TiAlN coated END MILLS Customer Service
101 Solid Carbide End Mills 2 Flute Double End Square End Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy 2 Flute Stainless Steel Cast Iron Titanium END MILLS Tolerance: Shank dia: h6 and Cutting dia: h10 Stub Cut Shank of Cut Series Flute uncoated 1/32 1/8 5/64 1-1/ /16 1/8 1/8 1-1/ /32 1/8 3/16 1-1/ /8 1/8 1/4 1-1/ /32 3/16 5/ /16 3/16 3/ /4 1/4 1/2 2-1/ /16 5/16 1/2 2-1/ /8 3/8 1/2 2-1/ /2 1/2 5/ Flute Double End Square End Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy 4 Flute Stainless Steel Cast Iron Titanium Shank tolerance h6 and Cutting dia to mm Stub Cut Shank of Cut Series Flute uncoated 1/32 1/8 5/64 1-1/ /16 1/8 1/8 1-1/ /32 1/8 3/16 1-1/ /8 1/8 1/4 1-1/ /32 3/16 5/ /16 3/16 3/ /4 1/4 1/2 2-1/ /16 5/16 1/2 2-1/ /8 3/8 1/2 2-1/ /2 1/2 5/ TMX, part of the Toolmex Industrial Solutions family END MILLS 345
102 Solid Carbide End Mills 2 and 4 Flute Double End Weldon Shank Square End END MILLS Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium 2 Flute 4 Flute Tolerance: Shank dia: h6 and Cutting dia: h10 Shank tolerance h6 and Cutting dia to mm Standard Cut Shank of Cut Series Flute uncoated Series Flute uncoated 1/8 3/8 3/8 3-1/ /32 3/8 7/16 3-1/ /16 3/8 1/2 3-1/ /32 3/8 9/16 3-3/ /4 3/8 5/8 3-3/ /32 3/8 11/16 3-3/ /16 3/8 3/4 3-1/ /32 3/8 3/4 3-1/ /8 3/8 3/4 3-1/ /16 1/2 7/ /2 1/ END MILLS Customer Service
103 Solid Carbide End Mills 2 and 4 Flute Double End Weldon Shank Ball Nose Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium END MILLS 2 Flute 4 Flute Shank tolerance h6 and Cutting dia to mm Shank tolerance h6 and Cutting dia to mm Standard Cut Shank of Cut Series Flute uncoated Series Flute uncoated 1/8 3/8 3/8 3-1/ /32 3/8 7/16 3-1/ /16 3/8 1/2 3-1/ /32 3/8 9/16 3-3/ /4 3/8 5/8 3-3/ /32 3/8 11/16 3-3/ /16 3/8 3/4 3-1/ /32 3/8 3/4 3-1/ /8 3/8 3/4 3-1/ /16 1/2 7/ /2 1/ TMX, part of the Toolmex Industrial Solutions family END MILLS 347
104 Solid Carbide End Mills 4 and 5 Flute Variable Helix Corner Radius END MILLS Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 92 4 Flute 5 Flute Cut Shank of Cut Corner Radius Series Flute Corner Radius TiAIN coated Series Flute Corner Radius TiAIN coated 1/8 1/8 1/2 1-1/ /16 3/16 5/ /4 1/4 1/ /4 1/4 3/4 2-1/ /4 1/4 1-1/ /16 5/16 1/ /16 5/16 13/16 2-1/ /16 5/16 1-1/ /8 3/8 5/ /8 3/ / /8 3/8 1-1/ /16 7/ / /2 1/2 5/8 2-1/ /2 1/2 1-1/ /2 1/ /8 5/8 3/ /8 5/8 1-1/4 3-1/ /8 5/8 2-1/ /4 3/ /4 3/4 1-1/ /4 3/4 2-1/ / END MILLS Customer Service
105 Solid Carbide End Mills 4 Flute Variable Helix Sharp and Ball Nose Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 92 END MILLS 4 Flute SHARP 4 Flute Ball Nose Shank Tolerance h6 Standard Cut Shank of Cut Series Flute SHARP TiAIN coated Series Flute Ball Nose TiAIN coated 1/8 1/8 1/2 1-1/ /16 3/16 5/ /4 1/4 3/4 2-1/ S /16 5/16 7/8 2-1/ /8 3/ / S /16 7/16 1-1/8 2-3/ /2 1/2 1-1/ S /8 5/8 1-1/2 3-1/ S /4 3/4 1-3/ S / S TMX, part of the Toolmex Industrial Solutions family END MILLS 349
106 Solid Carbide End Mills 6 Flute Single End 45º Helix with Corner Radius END MILLS Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium 6 Flute Standard Cut Shank of Cut Corner Radius Series Flute Corner Radius TiAIN coated 1/4 1/4 3/4 2-1/ /16 5/16 13/16 2-1/ /8 3/ / /2 1/ /8 5/8 1-1/4 3-1/ /4 3/4 1-1/ / END MILLS Customer Service
107 Solid Carbide End Mills 2 and 3 Flute for Aluminium Features and Applications: Aluminium Alloy Excellent Copper Plastic Good See Speeds and Feeds on page 92 END MILLS 2 Flute 3 Flute Tolerance +.000/-.002 Tolerance +.000/-.002 Standard Cut Shank of Cut 2 Flute Corner Radius Series Flute uncoated Series Flute uncoated (.005 radius) 1/4 1/4 3/4 2-1/ /16 5/16 13/16 2-1/ /8 3/ / /16 7/ / /2 1/ /2 1/2 1-1/ /8 5/8 1-1/4 3-1/ /8 5/8 1-5/8 3-1/ /4 3/4 1-1/ /4 3/4 1-5/ / Long Cut Shank of Cut 2 Flute Corner Radius Series Flute uncoated Series Flute uncoated (.005 radius) 1/4 1/4 1-1/ /16 5/16 1-1/ /8 3/8 1-1/ /2 1/2 1-1/ /2 1/ /8 5/8 2-1/ /4 3/4 2-1/ / TMX, part of the Toolmex Industrial Solutions family END MILLS 351
108 Solid Carbide End Mills 4 Flute Roughing End Mills Fine Pitch END MILLS Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium See Speeds and Feeds on page 92 4 Flute Shank Tolerance h6 and Cutting dia: to mm Standard Cut Shank of Cut Series Flute uncoated Series Flute TiAIN coated 1/4 1/4 3/4 2-1/ /16 5/16 11/32 2-1/ /8 3/8 7/8 2-1/ /16 7/ / /2 1/2 1-1/ /16 9/16 1-1/4 3-1/ /8 5/8 1-1/4 3-1/ /4 3/4 1-1/ / Long Cut Shank of Cut Series Flute uncoated Series Flute TiAIN coated 1/4 1/4 1-1/ /8 3/8 1-1/ /2 1/ /8 5/8 2-1/ /4 3/4 2-1/ / END MILLS Customer Service
109 Solid Carbide End Mills 2 and 4 Flute Drill Mill 90º point Features and Applications: Aluminium Alloy Excellent Carbon Steel Alloy Steel Good Hard Steel Nickel / Inconel Alloy Stainless Steel Cast Iron Titanium END MILLS 2 Flute 4 Flute Shank Tolerance h6 and Cutting dia: to mm Standard Cut Shank of Cut Series Flute uncoated Series Flute TiAIN coated Series Flute uncoated Series Flute TiAIN coated 1/8 1/8 1/2 1-1/ /16 3/16 5/ /4 1/4 3/4 2-1/ /16 5/16 13/16 2-1/ /8 3/ / /16 7/ / /2 1/ /8 5/8 1-1/4 3-1/ /4 3/4 1-1/ TMX, part of the Toolmex Industrial Solutions family END MILLS 353
110 HSS and Cobalt End Mills 2 Flute Regular End Mills END MILLS of Mill of Shank of Cut OAL HSS Cobalt M-42 1/8 3/8 3/8 2-5/ /32 3/8 7/16 2-5/ /16 3/8 7/16 2-5/ /32 3/8 1/2 2-5/ /4 3/8 1/2 2-5/ /32 3/8 9/16 2-5/ /16 3/8 9/16 2-5/ /32 3/8 9/16 2-5/ /8 3/8 9/16 2-5/ /32 3/8 13/16 2-1/ /16 3/8 13/16 2-1/ /32 3/8 13/16 2-1/ /2 3/8 13/16 2-1/ /2 1/ /16 1/2 1-1/8 3-1/ /8 1/2 1-1/8 3-1/ /16 1/2 1-5/16 3-1/ /4 1/2 1-5/16 3-1/ /16 1/2 1-1/2 3-5/ /8 1/2 1-1/2 3-5/ /16 1/2 1-1/2 3-5/ /2 1-1/2 3-5/ /8 5/8 1-5/16 3-7/ /16 5/8 1-5/16 3-7/ /4 5/8 1-5/16 3-7/ /16 5/8 1-1/2 3-5/ /8 5/8 1-1/2 3-5/ /16 5/8 1-1/2 3-5/ /8 1-1/2 3-5/ /16 5/8 1-5/8 3-7/ /4 3/4 1-5/16 3-7/ /16 3/4 1-1/2 3-3/ /8 3/4 1-1/2 3-3/ /16 3/4 1-1/2 3-3/ /4 1-1/2 3-3/ /16 3/4 1-5/8 3-7/ /8 3/4 1-5/8 3-7/ /4 3/4 1-5/8 3-7/ /16 3/4 1-5/8 3-7/ of Mill of Shank of Cut OAL HSS 1-1/2 3/4 1-5/8 3-7/ /8 3/4 1-5/8 3-7/ /4 3/4 1-5/8 3-7/ /8 3/4 1-5/8 3-7/ /4 1-5/8 3-7/ /8 7/8 1-1/2 3-3/ /16 7/8 1-1/2 3-3/ /8 1-1/2 3-3/ /8 7/8 1-5/8 3-7/ /8 4-1/ / /8 4-1/ / /8 4-1/ / /8 4-1/ /4 1-1/4 1-5/8 4-1/ /2 1-1/4 1-5/8 4-1/ /8 1-1/4 1-5/8 4-1/ /4 1-1/4 1-5/8 4-1/ /4 1-5/8 4-1/ /4 2-1/ / / END MILLS Customer Service
111 HSS and Cobalt End Mills 2 Flute Regular Metric End Mills of Cut of Shank of Cut OAL HSS 3 MM 3/8 3/8 2-5/ MM 3/8 7/16 2-5/ MM 3/8 1/2 2-5/ MM 3/8 1/2 2-5/ MM 3/8 9/16 2-5/ MM 3/8 9/16 2-5/ MM 3/8 9/16 2-5/ MM 3/8 13/16 2-1/ MM 3/8 13/16 2-1/ MM 3/8 13/16 2-1/ MM 1/2 1-1/8 3-1/ MM 1/2 1-1/8 3-1/ MM 1/2 1-1/8 3-1/ MM 1/2 1-1/8 3-1/ MM 1/2 1-1/8 3-1/ MM 1/2 1-5/16 3-7/ MM 1/ / MM 5/8 1-5/16 3-7/ MM 5/8 1-5/16 3-7/ MM 5/8 1-1/2 3-3/ MM 3/4 1-5/16 3-7/ MM 3/4 1-1/2 3-3/ MM 3/4 1-1/2 3-3/ MM 3/ / MM 3/ / MM 3/ / MM / MM / MM / MM / END MILLS 2 Flute Long End Mills of Mill of Shank of Cut OAL HSS 1/4 3/ / /8 3/8 1-1/2 3-1/ /2 1/ /8 5/ / /4 3/4 2-1/4 4-1/ /8 7/8 2-1/2 4-3/ / / / / / / / / / TMX, part of the Toolmex Industrial Solutions family END MILLS 355
112 HSS and Cobalt End Mills 2 Flute Extended End Mills END MILLS of Mill of Shank Below Shank of Cut OAL HSS 1/4 3/8 1-1/2 5/8 3-1/ /16 3/8 1-3/4 3/4 3-5/ /8 3/8 1-3/4 3/4 3-5/ /2 1/2 2-1/ /8 5/8 2-3/4 1-3/8 4-5/ /4 3/4 3-3/8 1-5/8 5-3/ /8 7/ /2 7-1/ /4 1-1/ / Flute Double End, End Mills of Mill of Shank of Cut OAL HSS Cobalt M-42 1/8 3/8 3/8 3-1/ /32 3/8 7/16 3-1/ /16 3/8 7/16 3-1/ /32 3/8 1/2 3-1/ /4 3/8 1/2 3-1/ /32 3/8 9/16 3-1/ /16 3/8 9/16 3-1/ /32 3/8 9/16 3-1/ /8 3/8 9/16 3-1/ /32 1/2 13/16 3-3/ /16 1/2 13/16 3-3/ /32 1/2 13/16 3-3/ /2 1/2 13/16 3-3/ /16 5/8 1-1/8 4-1/ /8 5/8 1-1/8 4-1/ /16 3/4 1-5/ /4 3/4 1-5/ /16 7/8 1-9/16 5-1/ /8 7/8 1-9/16 5-1/ /8 5-7/ END MILLS Customer Service
113 HSS and Cobalt End Mills 2 Flute Regular Ball Nose End Mills of Mill of Shank of Cut OAL HSS Cobalt M-42 1/8 3/8 3/8 2-5/ /16 3/8 1/2 2-3/ /4 3/8 5/8 2-7/ /16 3/8 3/4 2-1/ /8 3/8 3/4 2-1/ /16 1/ /2 1/ /16 1/2 1-1/8 3-1/ /8 1/2 1-1/8 3-1/ /8 5/8 1-3/8 3-1/ /4 1/2 1-5/16 3-5/ /4 3/4 1-5/8 3-7/ /16 3/ / /8 3/ / /8 7/ / /16 3/4 2-1/4 4-1/ /4 2-1/4 4-1/ /4 4-3/ / /4 4-3/ /4 1-1/4 2-1/ /8 1-1/4 2-1/ /2 1-1/4 2-1/ /4 2-1/ END MILLS 2 Flute Double End Ball Nose End Mills of Mill of Shank of Flute OAL HSS 1/8 3/8 3/8 3-1/ /16 3/8 7/16 3-1/ /4 3/8 1/2 3-1/ /16 3/8 9/16 3-1/ /8 3/8 9/16 3-1/ /16 1/2 13/16 3-3/ /2 1/2 13/16 3-3/ /8 5/8 1-1/8 4-1/ /4 3/4 1-5/ /8 7/8 1-9/16 5-1/ /8 5-7/ TMX, part of the Toolmex Industrial Solutions family END MILLS 357
114 HSS and Cobalt End Mills Multiple Flute Regular End Mills END MILLS of Mill of Shank of Cut OAL of Flutes HSS Center Cutting Cobalt M-42 Center Cutting 1/8 3/8 3/8 2-5/ /32 3/8 3/8 2-5/ /16 3/8 1/2 2-3/ /32 3/8 5/8 2-7/ /4 3/8 5/8 2-7/ /32 3/8 3/4 2-1/ /16 3/8 3/4 2-1/ /32 3/8 3/4 2-1/ /8 3/8 3/4 2-1/ /32 3/ / /16 3/ / /32 3/ / /2 3/ / /2 1/2 1-1/4 3-1/ /16 1/2 1-3/8 3-3/ /8 1/2 1-3/8 3-3/ /16 1/2 1-5/8 3-5/ /4 1/2 1-5/8 3-5/ /16 1/2 1-7/ /8 1/2 1-7/ /8 1/2 1-7/ /2 1-7/ /2 1-7/8 3-7/ /2 1-7/ /8 5/8 1-5/8 3-3/ /16 5/8 1-5/8 3-3/ /4 5/8 1-5/8 3-3/ /16 5/8 1-7/ /8 5/8 1-7/ /8 1-7/ /8 1-7/ /4 3/4 1-5/8 3-3/ /4 3/4 1-5/8 3-3/ /16 3/4 1-7/8 4-1/ /8 3/4 1-7/8 4-1/ /8 3/4 1-7/8 4-1/ /16 3/4 1-7/8 4-1/ /4 1-7/8 4-1/ /4 1-7/8 4-1/ /16 3/ / /16 3/ / /8 3/ / /16 3/ / /4 3/ / /16 3/ / /8 3/ / END MILLS Customer Service
115 HSS and Cobalt End Mills Multiple Flute Regular End Mills (continued) of Mill of Shank of Cut OAL of Flutes HSS Center Cutting Cobalt M-42 Center Cutting 1-7/16 3/ / /16 3/ / /2 3/ / /8 3/ / /4 3/ / /8 3/ / / / /8 7/8 1-7/8 4-1/ /8 1-7/8 4-1/ / / / / / / / / / / / / /4 1-1/ / /4 1-1/ / /8 1-1/ / /2 1-1/ / /2 1-1/ / /8 1-1/ / /4 1-1/ / /4 1-1/ / /8 1-1/ / / / Piece 1/8 to 1 Set Includes: 1/8 to 7/16 x 3/8 Shank, 1/2 to 9/16 x 1/2 Shank, 5/8 to 3/4 x 5/8 Shank, 13/16 to 1 x 3/4 Shank END MILLS Multiple Flute Heavy Duty End Mills of Mill of Shank 6 Flute of Cut OAL HSS / / TMX, part of the Toolmex Industrial Solutions family END MILLS 359
116 HSS and Cobalt End Mills Multiple Flute Regular Metric End Mills END MILLS of Cut of Shank of Cut OAL of Flutes HSS Center Cutting 3 MM 3/8 3/8 2-5/ MM 3/8 1/2 2-3/ MM 3/8 9/16 2-1/ MM 3/8 5/8 2-1/ MM 3/8 3/4 2-1/ MM 3/8 3/4 2-1/ MM 3/8 3/4 2-1/ MM 3/ / MM 3/ / MM 3/ / MM 1/2 1-1/4 3-1/ MM 1/2 1-1/4 3-1/ MM 1/2 1-3/8 3-3/ of Cut of Shank of Cut OAL of Flutes HSS Center Cutting 16 MM 5/8 1-5/8 3-3/ MM 5/8 1-5/8 3-3/ MM 5/8 1-7/8 4-1/ MM 3/4 1-5/8 3-3/ MM 3/4 1-5/8 3-3/ MM 3/4 1-7/8 4-1/ MM 3/4 1-7/8 4-1/ MM 3/ / MM 7/8 1-7/8 4-1/ MM 7/ / MM / MM / Multiple Flute Long End Mills of Mill of Shank of Cut OAL of Flutes HSS Center Cutting Cobalt M-42 Center Cutting 1/4 3/8 1-1/4 3-1/ /16 3/8 1-3/8 3-1/ /8 3/8 1-1/2 3-1/ /16 1/2 1-3/4 3-3/ /2 1/ /4 1/ / /8 5/8 2-1/2 4-5/ /4 3/ / / / /8 7/8 3-1/2 5-3/ / / / / / / / /4 1-1/ / /4 1-1/ / /2 1-1/ / END MILLS Customer Service
117 HSS and Cobalt End Mills Multiple Flute Extra Long End Mills of Mill of Shank of Cut OAL of Flutes HSS Center Cutting 1/4 3/8 1-3/4 3-9/ /16 3/ / /8 3/8 2-1/2 4-1/ /2 1/ /8 1/ / /4 1/ / /8 5/ / /4 3/ / /8 7/ / / /4 1-1/ / /4 1-1/ / /2 1-1/ / END MILLS 4 Flute Double End, End Mills of Mill of Shank of Cut OAL HSS Center Cutting Cobalt M-42 Center Cut 1/8 3/8 3/8 3-1/ /32 3/8 7/16 3-1/ /16 3/8 1/2 3-1/ /64 3/8 9/16 3-1/ /32 3/8 9/16 3-1/ /64 3/8 9/16 3-1/ /4 3/8 5/8 3-3/ /32 3/8 11/16 3-3/ /16 3/8 3/4 3-1/ /32 3/8 3/4 3-1/ /8 3/8 3/4 3-1/ /32 1/ / /16 1/ / /32 1/ / /2 1/ / /16 5/8 1-3/ /8 5/8 1-3/ /16 3/4 1-5/8 5-5/ /4 3/4 1-5/8 5-5/ /16 7/8 1-7/8 6-1/ /8 7/8 1-7/8 6-1/ / /8 6-3/ /8 6-3/ TMX, part of the Toolmex Industrial Solutions family END MILLS 361
118 HSS and Cobalt End Mills Multiple Flute Regular Ball Nose End Mills END MILLS of Mill of Shank of Flute OAL of Flutes HSS Cobalt M-42 1/8 3/8 3/8 2-5/ /16 3/8 1/2 2-3/ /4 3/8 5/8 2-7/ /16 3/8 3/4 2-1/ /8 3/8 3/4 2-1/ /16 3/ / /2 1/2 1-1/4 3-1/ /8 5/8 1-5/8 3-3/ /4 3/4 1-5/8 3-7/ /8 7/8 1-7/8 4-1/ / /4 1-1/ / /2 1-1/ / Roughing End Mills of Mill of Shank of Cut of Flutes Cobalt M-42 1/4 3/8 5/ / /16 3/8 3/ / /8 3/8 3/ / /16 3/ / /2 1/2 1-1/ / /2 1/ /16 1/2 1-3/ / /8 5/8 1-5/ / /8 5/8 2-1/ / /16 5/8 1-5/ / /4 5/8 1-5/ / /4 3/4 1-5/ / /4 5/ / /4 3/ / /8 3/4 1-7/ / /8 3/4 3-1/ / / / / / / / /4 3/ / /4 1-1/ / /4 1-1/ / /4 1-1/ / /2 3/ / /2 1-1/ / /2 1-1/ / END MILLS Customer Service
119 Milling Cutters and Saws TABLE OF CONTENTS MILLING CUTTERS AND SAWS Technical Reference Milling Cutters with Shanks Corner Rounding Cutters Woodruff Keyseat Cutters Milling Cutters Single Angle Milling Cutters Double Angle Milling Cutters Shell End Mills Involute Gear Cutters Jewelers Saws Saw Arbors Screw Slotting Saws Plain Metal Slitting Saws Side Milling Cutters Power Hacksaw Blades MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 363
120 Milling Cutters and Saws Technical Reference Recommended Speeds and Feeds for Side Milling Cutters MILLING CUTTERS / SAWS Material to be Machined Hardness (BHN) SFM range Chip loads per tooth Range " " " " " " N/A " Standard Keyways for Milling Cutters & Saws Cutter Hole meter Nominal size square KEY 1/2" 3/32" 5/8" 1/8" 3/4" 1/8" 7/8" 1/8" 1" 1/4" 1-1/4" 5/16" 1-1/2" 3/8" 1-3/4" 7/16" 2" 1/2" 2-1/2" 5/8" 3" 3/4" 3-1/2" 7/8" 4" 1" 4-1/2" 1-1/8" 5" 1-1/4" 364 MILLING CUTTERS AND SAWS Customer Service
121 Milling Cutters with Shanks Single Angle Chamfering Cutters Cutter Width Shank OAL Angle 1/2 1/8 3/8 2-1/ /4 3/16 3/8 2-1/ /16 1/2 2-1/ /2 1/2 3/4 2-3/ /2 7/32 3/8 2-1/ /4 5/16 3/8 2-1/ /16 1/2 2-1/ /2 5/8 3/4 2-3/ Concave Shank Type Cutters MILLING / SAWS Radius Shank Cutter of Flutes 1/32 1/2 3 3/ /16 1/2 3 3/ /32 1/2 3 3/ /8 3/4 3-1/ /32 3/4 3-1/ /16 3/4 3-1/ /4 3/ / /16 3/ / /8 3/4 4-3/16 1-1/ Note: Full form is radius x 2 Convex Shank Type Cutters Radius Shank Cutter of Flutes Part 1/32 1/2 3 3/ /16 1/2 3 3/ /32 1/2 3 7/ /8 3/4 3-1/2 1-1/ /32 3/4 3-1/2 1-5/ /16 3/4 3-1/2 1-3/ /4 3/ / /16 3/ / /8 3/ / TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 365
122 Milling Cutters with Shanks Double Angle Shank Type Cutters MILLING CUTTERS / SAWS Included Angle Cutter Shank Cutter Thickness Part 60 3/4 3/8 2-3/8 3/ /2 2-27/32 5/ /8 5/8 3-7/32 7/ /2 5/8 3-3/8 1/ /8 3/4 3-25/32 5/ /4 3/8 2-7/16 1/ /2 2-29/32 3/ /8 5/8 3-9/32 1/ /2 5/8 3-7/16 9/ /8 3/4 3-25/32 5/ Dovetail Cutters of Cutter Width of Cutter of Shank OAL of Flutes Angle High Speed Steel Cobalt 3/8 1/8 3/8 2-1/ /2 5/32 3/8 2-1/ /4 1/4 3/8 2-1/ /8 7/16 5/8 2-7/ /8 9/16 7/8 3-1/ /4 5/ / /8 3/16 3/8 2-1/ /2 1/4 3/8 2-1/ /4 5/16 3/8 2-1/ /8 9/16 5/8 2-7/ /8 13/16 7/8 3-1/ /4 1-1/ / MILLING CUTTERS AND SAWS Customer Service
123 Corner Rounding Cutters Corner Rounding Cutters Radius Shank Cutter OAL High Speed Steel Cobalt 1/16 3/8 7/16 2-1/ /32 3/8 1/2 2-1/ /8 3/8 5/8 2-1/ /8 1/2 5/ /32 1/2 3/ /16 1/2 7/ /16 3/4 7/8 3-1/ /4 1/ /4 3/ / /32 1/ /32 5/ /16 1/2 1-1/8 3-1/ /16 5/8 1-1/8 3-1/ /16 3/4 1-1/8 3-1/ /16 7/8 1-1/8 3-1/ /8 1/2 1-1/4 3-1/ /8 3/4 1-1/4 3-1/ /8 7/8 1-1/4 3-3/ /16 3/4 1-3/8 3-3/ / / /32 3/4 1-7/16 3-3/ /2 3/4 1-1/2 3-7/ / /2 4-1/ /16 3/4 1-5/ /8 3/4 1-5/ / / /32 3/4 1-3/ /4 3/4 1-7/ / / / / /4 2-9/ / MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 367
124 Woodruff Keyseat Cutters Woodruff Keyseat Cutters MILLING CUTTERS / SAWS American Standard Nominal Width of Face Straight Teeth Staggered Teeth 202 1/4 1/16 2-1/ /2 5/16 1/16 2-1/ /2 5/16 3/32 2-3/ /8 1/16 2-1/ /8 3/32 2-3/ /8 1/8 2-1/ /2 1/16 2-1/ /2 3/32 2-3/ /8 3/32 2-3/ /2 1/8 2-1/ /8 1/8 2-1/ /4 1/8 2-1/ /8 5/32 2-5/ /8 3/16 2-3/ /4 5/32 2-5/ /4 1/4 2-1/ /8 5/32 2-5/ /4 3/16 2-3/ /8 3/16 2-3/ /8 7/32 2-7/ /16 2-3/ /32 2-7/ /8 2-3/ /8 3/16 2-3/ /8 1/4 2-1/ /4 2-1/ /8 7/32 2-7/ /8 1/4 2-1/ /4 3/16 2-3/ /4 7/32 2-7/ /4 1/4 2-1/ /8 1/4 2-1/ /2 1/4 2-1/ /16 2-5/ /8 5/16 2-5/ /4 5/16 2-5/ /8 5/16 2-5/ /2 5/16 2-5/ /4 3/8 2-3/ /8 3/8 2-3/ /2 3/8 2-3/ MILLING CUTTERS AND SAWS Customer Service
125 Milling Cutters Milling Cutters of Circle of Cutter Concave Cutters Hole of Teeth Concave Cutters Part 1/8 2-1/ /32 2-1/ /16 2-1/ /32 2-1/ /4 2-1/ /32 2-1/ /16 2-3/ /32 2-3/ /8 2-3/ / /2 2-1/4 7/ / / /8 2-3/ / /8 3-1/2 1-1/ / /4 3-3/4 1-1/ /8 3-1/ / /4 1-1/ / / / / /2 4-1/4 1-1/ /4 5-1/2 1-1/ of Circle of Cutter Convex Cutters Hole Convex Cutters of Teeth Part 1/16 2-1/ /32 2-1/ /8 2 7/ /8 2-1/ /32 2-1/ /16 2-1/ /32 2-1/ /4 1 7/ /4 2-1/ /4 2-1/ /32 2-1/ /16 2-3/ /32 2-3/ /8 2-1/4 7/ /8 2-3/ /32 2-3/ / / /16 2-3/ / /8 2-3/ / /8 3-1/ /8 3-1/2 1-1/ / / /4 3-3/4 1-1/ /8 3-1/ / / / /4 1-1/ / / / / /8 4-1/4 1-1/ /2 4-1/4 1-1/ /8 5-1/2 1-1/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 369
126 Milling Cutters Single Angle Milling Cutters MILLING CUTTERS / SAWS Width of Face Hole Size of Teeth Right Hand 45 Left Hand 45 Right Hand 60 Left Hand /2 1/2 7/ /4 1/ / /2 1-1/ / /8 1-1/ / /4 1-1/ / /2 1-1/ / /4 1-1/ / /4 1-1/ / /4 1-1/ Double Angle Milling Cutters Width of Face Hole Size of Teeth /4 1/ / / /2 1-1/ / /4 1-1/ / /4 1-1/ / /4 1-1/ / /2 1-1/ MILLING CUTTERS AND SAWS Customer Service
127 Shell End Mills Shell End Mills of Mill Size of Hole of Cut of Flutes Drive Slot Width HSS Right Hand 1-1/4 1/ / /2 1/2 1-1/8 8 1/ /4 3/4 1-1/4 8 5/ /4 1-3/8 10 5/ / /2 10 3/ / /8 10 3/ / /8 10 3/ /4 1-3/4 10 1/ /2 1-1/4 1-7/8 12 1/ /2 2-1/4 14 5/ /2 2-1/4 16 3/ / /4 16 3/ /4 16 3/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 371
128 Involute Gear Cutters MILLING CUTTERS / SAWS Involute Gear Cutters, 14-1/2 Part number series metrical Pitch of Cutter Hole Size Tooth height (H) is in inches /4 1-1/ /4 1-1/ /4 1-1/ /2 1-1/ /4 1-1/ / /4 1-1/ / / /2 1-1/ / /8 1-1/ / /4 1-1/ / /8 1-1/ / / /8 7/ / /4 7/ / /8 7/ / / /8 7/ / / / / / /4 7/ / /4 7/ / /4 7/ / /4 7/ / /4 7/ /4 7/ / /4 7/ / /4 7/ / /4 7/ Tooth height (H) is in inches DP is diametrical pitch Cutter Range of Teeth MILLING CUTTERS AND SAWS Customer Service
129 Involute Gear Cutters Involute Gear Cutters, 20 Part number series Module of Cutter Hole mm Individual Cutters Piece Sets MILLING / SAWS m = module m = H 2.2 Modules 1 thru 7 Cutter Range of Teeth Cut Tooth height (H) is in mm TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 373
130 Jewelers Saws Jewelers Slotting Saws MILLING CUTTERS / SAWS Thickness (inches) Teeth Per Saw Hole Size 1/4 Hole Size 5/16 Hole Size 3/8 Hole Size 1/ / / / / / / / / / / / / / / / / / / / / / / / MILLING CUTTERS AND SAWS Customer Service
131 Jewelers Saws Jewelers Slotting Saws (continued) Thickness (inches) Teeth Per Saw Hole Size 3/8 Hole Size 1/2 1-3/ / / / / / / / / / / / / Thickness (inches) Teeth Per Saw Hole Size 1/2 2-1/ / / / / / / / / / / / / / / / MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 375
132 Jewelers Saws Jewelers Slotting Saws (continued) MILLING CUTTERS / SAWS Thickness (inches) Teeth Per Saw Hole Size 1/2 Hole Size 3/4 Hole Size MILLING CUTTERS AND SAWS Customer Service
133 Saws Arbors and Screw Slotting Saws Slitting or Slotting Saw Arbors Straight Shank of Arbor Hole Size 1/2 3-3/4 3/ R8 Shank Hole Size 5-3/ Weldon Shank of Arbor Hole Size 1/2 2-9/ Screw Slotting Saws MILLING / SAWS Width of Face 56 Teeth Hole Size of Teeth Part 2-3/ / / / / / / / / / / / / / / / / / / / / / / Width of Face 60 Teeth Hole Size of Teeth Part 2-1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 377
134 Screw Slotting Saws Screw Slotting Saws (continued) MILLING CUTTERS / SAWS Width of Face 72 Teeth Hole Size of Teeth Part 2-3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Width of Face 72 Teeth Hole Size of Teeth Part 2-3/ / / / / / / / / / / / / / / / / / / / / / / / / Width of Face 90 Teeth Hole Size of Teeth Part 1-3/ / / / / / / / / / / / / / / / / / / / / / Width of Face 90 Teeth Hole Size of Teeth Part 1-3/ / / / / / / / / / / / / / / / / / / / MILLING CUTTERS AND SAWS Customer Service
135 Metal Slitting Saws Plain Metal Slitting Saws Width of Face Hole Size of Teeth Part 1-3/4 1/32 1/ /16 1/ /32 1/ /8 1/ /2 3/64 3/ /2 1/32 3/ /2 1/32 7/ /2 3/64 7/ /2 1-1/16 7/ /2 3/32 7/ /2 1/8 7/ /2 1/ / / / / / / / / / / / /2 1/ /2 3/ /2 1/ /2 3/ /2 1/ /2 1/ /2 9/ /2 5/ /2 3/ /2 3/ / / / / / / / / / / / Width of Face Hole Size of Teeth Part 4-1/2 1/ /2 3/ /2 1/ /2 3/ /2 1/ / / / / / / / / / /16 1-1/ /32 1-1/ /8 1-1/ /32 1-1/ /16 1-1/ / / / / / / / / / /16 1-1/ /32 1-1/ /8 1-1/ /32 1-1/ /16 1-1/ / / / /32 1-1/ /8 1-1/ /16 1-1/ /4 1-1/ /32 1-1/ /8 1-1/ /16 1-1/ /4 1-1/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 379
136 Metal Slitting Saws Metal Slitting Saws Plain Teeth with Side Chip Clearance MILLING CUTTERS / SAWS Thickness Hole Size Depth of Cut of Teeth Part 2 1/16 5/ /64 5/ /32 5/ /8 5/ /32 5/ /2 1/16 7/ /2 1/ /2 3/32 7/ /2 3/ /2 7/64 7/ /2 1/8 7/ /2 1/ / / / / / / /64 1-1/ / / / /16 1-1/ / / /4 1-1/ / /16 1-1/ / / /32 1-1/ / / /8 1-1/ / /64 1-1/ / /32 1-1/ / Thickness Hole Size Depth of Cut of Teeth Part 4 3/ /16 1-1/ / /32 1-1/ / /4 1-1/ / /16 1-1/ / /32 1-1/ / / /8 1-1/ / /64 1-1/ / /32 1-1/ / / /16 1-1/ / /32 1-1/ / /4 1-1/ / /16 1-1/ / /32 1-1/ / / /8 1-1/ / / /32 1-1/ / /16 1-1/ / /8 1-1/ /16 1-1/ MILLING CUTTERS AND SAWS Customer Service
137 Metal Slitting Saws Metal Slitting Saws Staggered Teeth with Side Chip Clearance Thickness Hole Size Depth of Cut of Teeth Part 3 1/ /16 1-1/ / /64 1-1/ / /32 1-1/ / / / /64 1-1/ / /32 1-1/ / / /16 1-1/ / / / /16 1-1/ / /64 1-1/ / /32 1-1/ / / /8 1-1/ / /64 1-1/ / /32 1-1/ Thickness Hole Size Depth of Cut of Teeth Part 4 11/ / /16 1-1/ / / /4 1-1/ / / /8 1-1/ / / /16 1-1/ / /4 1-1/ / /8 1-1/ / /32 1-1/ / / /16 1-1/ / /4 1-1/ / /16 1-1/ / /16 1-1/ /4 1-1/ /16 1-1/ /4 1-1/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 381
138 Side Milling Cutters Side Milling Cutters Plain Teeth MILLING CUTTERS / SAWS Hole Size of Teeth Width of Face Depth of Cut Part 2 1/2 14 3/ /2 14 1/ /2 14 3/ /8 14 3/ /8 14 1/ /8 14 5/ /8 14 3/ /8 14 1/ /8 14 5/ /8 14 3/ /8 14 7/ /2 7/8 16 3/ /2 7/8 16 1/ /2 7/8 16 5/ /2 7/8 16 3/ /2 7/8 16 7/ /2 7/8 16 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /4 18 3/ /4 18 1/ /4 18 5/ /4 18 3/ Hole Size of Teeth Width of Face Depth of Cut Part 3 1-1/4 18 1/ /4 18 3/ / / / / / / / / / / / / /2 1-1/4 20 1/ / / / / / / / / / / / / / / / / / /4 22 3/ /4 22 7/ /4 22 1/ /4 22 5/ / / /4 22 3/ /4 22 7/ /4 22 1/ /4 22 9/ /4 22 5/ / / /4 22 3/ /4 22 7/ / / / /2 1-1/4 24 3/ /2 1-1/4 24 1/ / MILLING CUTTERS AND SAWS Customer Service
139 Side Milling Cutters Side Milling Cutters Plain Teeth (continued) Hole Size of Teeth Width of Face Depth of Cut Part / / / / / / / / / /4 24 1/ /4 24 9/ /4 24 5/ /4 24 3/ /4 24 7/ /4 24 1/ /4 24 9/ /4 24 5/ /4 24 3/ / / / / / / / / / / /4 26 1/ Hole Size of Teeth Width of Face Depth of Cut Part 6 1-1/4 26 9/ /4 26 5/ / / /4 26 3/ /4 26 7/ /4 26 1/ /4 26 9/ /4 26 5/ /4 26 3/ / /4 28 1/ /4 28 5/ /4 28 3/ /4 28 1/ /4 28 5/ /4 28 3/ / / / / / /4 32 1/ /4 32 3/ /4 32 1/ /4 32 5/ /4 32 3/ / /4 34 1/ /4 34 3/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 383
140 Side Milling Cutters Side Milling Cutters Staggered Teeth MILLING CUTTERS / SAWS Hole Size of Teeth Width of Face Depth of Cut Part 2-1/2 7/8 16 3/ /2 7/8 16 1/ /2 7/8 16 5/ /2 7/8 16 3/ /2 7/8 16 1/ / / / / / / / / / / / / / / / / / / /4 16 3/ /4 16 1/ /4 16 3/ /4 16 1/ /4 16 5/ /4 16 3/ / / / / / / / / / / / / / / / / / / / Hole Size of Teeth Width of Face Depth of Cut Part / / / / / / / /4 18 3/ /4 18 7/ /4 18 1/ /4 18 9/ /4 18 5/ /4 18 3/ / / /4 18 7/ /4 18 1/ /4 18 9/ /4 18 5/ /4 18 3/ / / / /2 1-1/4 20 1/ / / / / / / / / / /4 22 1/ /4 22 5/ /4 22 3/ /4 22 7/ /4 22 1/ /4 22 5/ /4 22 3/ MILLING CUTTERS AND SAWS Customer Service
141 Side Milling Cutters Side Milling Cutters Staggered Teeth (continued) Hole Size of Teeth Width of Face Depth of Cut Part 5 1-1/ / / / / / / / /4 24 1/ /4 24 9/ /4 24 5/ /4 24 3/ /4 24 7/ /4 24 1/ /4 24 9/ /4 24 5/ /4 24 3/ /4 24 7/ / / / /4 26 1/ /4 26 5/ / /4 28 1/ /4 28 5/ /4 28 3/ /4 28 1/ /2 28 3/ MILLING / SAWS TMX, part of the Toolmex Industrial Solutions family MILLING CUTTERS AND SAWS 385
142 Power Hacksaw Blades MILLING CUTTERS / SAWS Power Hacksaw Blades Nominal inches Teeth/Inch Width Thickness OAL inches Tolerances Blade Dimension Tolerance inches.050 ± ± ±0.007 ±0.008 ±5/64 C to C of Pinholes ±5/ Pinhole / / / / /8 13-1/ / / / / / / / / / / / / / / / / / / / /2 17-1/ / / / / / / / / / MILLING CUTTERS AND SAWS Customer Service
143 Taps TABLE OF CONTENTS TAPS Technical Reference Hand Taps Tap and Reamer Wrenches Spiral Point Taps Spiral Flute Taps Combined Tap and Drills Tap and Drill Sets Pipe Taps TAPS TMX, part of the Toolmex Industrial Solutions family TAPS 387
144 Taps Technical Reference Regular Hand Tap Dimensions Fractional Sizes Regular ANSI Table 302 TAPS of Tap Threads per Inch NC NF N8 N10, A of Full Thread, B of Square, C of Shank, D Size of Square 1/ /2 1 5/ / /32 1-1/8 3/ / /16 1-1/4 7/ / /32 1-7/16 13/ / /8 1-21/32 7/ / / /32 1/ / / /16 9/ / /4 2 11/ / /16 2-7/32 3/ /8 2-1/2 13/ / /8 2-1/2 7/ / /16 2-9/16 7/ / /16 2-9/ / /4 2-9/ / /4 2-9/16 1-1/ / / / / / / / / / / /16 3-3/16 1-1/ / / /16 1-1/ / /16 3-9/16 1-1/ / /8 3-9/16 1-3/ / /16 1-3/ / / /4 3-9/16 1-7/ / / / / / / / / / /4 4-9/16 1-5/ / /16 1-3/ / /4 4-15/ / /2 5-5/16 2-1/ /4 5-5/16 2-1/ TAPS Customer Service
145 Taps Technical Reference Regular Hand Tap Dimensions Fractional Sizes Short r of Tap Threads per Inch N12, A of Full Thread, B of Square, C of Shank, D Size of Square 1-5/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / TAPS Regular Hand Tap Dimensions Machine Screw Sizes ANSI Table 304 Tap Sizes Basic Major Threads per inch NC UNC NF UNF of Flutes A of Thread B of Square C meter of Shank D Size of Square /8 5/16 3/ /16 3/8 3/ /4 7/16 3/ /16 1/2 3/ /8 9/16 3/ /16 5/8 3/ /16 3/ /8 3/4 1/ /8 7/8 1/ /8 15/16 9/ TMX, part of the Toolmex Industrial Solutions family TAPS 389
146 Hand Taps Regular Thread Hand Taps TAPS Tap Sizes Threads per Inch H Limit OAL Taper Plug Bottoming TPB-Set 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / TAPS Customer Service
147 Hand Taps Regular Thread Hand Taps (continued) Tap Sizes Threads per Inch H Limit OAL Taper Plug Bottoming TPB-Set 1-5/ / / / / / / / / / / / / / / / /8 5-1/2 6-11/ / / / / / / / / / / /2 7-5/ / / / / / / / /4 4-1/2 8-1/ / / / / / / / / / / / / / / / / / / / / / / / / / / TAPS TMX, part of the Toolmex Industrial Solutions family TAPS 391
148 Hand Taps Special Thread Hand Taps TAPS Tap Sizes Threads per Inch H Limit Taper Plug Bottoming 5/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Tap Sizes Threads per Inch H Limit Taper Plug Bottoming 5/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / The H limit for special thread taps, fractional sizes 5/32 thru 2-3/8, are the same as the most popular in Standard Thread Taps 2B Class Fit ANSI dimensions to Table page TAPS Customer Service
149 Hand Taps Special Thread Hand Taps (continued) Tap Sizes Threads per Inch H Limit Taper Plug Bottoming 1-1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / TAPS The H Limits for special thread taps, fractional sizes 5/32 thru 2-3/8, are the same as the most popular in the Standard Thread Taps 2B Class Fit. Coarse pitches are made in a longer length, and finer pitches are made in a shorter length. ANSI dimensions to Table page 146 TMX, part of the Toolmex Industrial Solutions family TAPS 393
150 Hand Taps Hand Taps, Machine Screw Sizes Regular Thread TAPS Tap Sizes Threads per Inch H Limit Taper Plug Bottoming TPB-Set / / / / / / / / / / / / / / / / / Special Thread Tap Sizes Threads per Inch Taper Plug Bottoming TAPS Customer Service
151 Hand Taps Left Hand Taps Tap Sizes Threads per Inch H Limit Taper Plug Bottoming TPB-Set 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / TAPS Oversized Right Hand Taps Fractional Sizes Tap Sizes Threads per Inch H Limit Plug 1/ / / / / / Adjustable Tap and Reamer Wrenches Size Tap Capacity Pipe Tap Range Machine Screw Sizes Tap Sizes Threads per Inch H Limit Plug TMX, part of the Toolmex Industrial Solutions family TAPS 395
152 Hand Taps ISO Metric Hand Taps TAPS Tap Size mm Pitch mm D Limit Taper Plug Bottoming TPB Set.35 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D Note: These taps have ANSI shanks 396 TAPS Customer Service
153 Hand Taps ISO Metric Hand Taps (continued) Tap Size mm Pitch mm D Limit Taper Plug Bottoming TPB Set 1.25 D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D TAPS Note; These taps have ANSI shanks TMX, part of the Toolmex Industrial Solutions family TAPS 397
154 Spiral Point Taps Spiral Point Gun Style Hand Taps TAPS Tap Sizes Threads per Inch Plug Only, Fractional Sizes H Limit Part 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Oversized Spiral Pointed Hand Taps Tap Sizes Fractional Sizes Threads per Inch Plug 1/ / / / / / / / Tap Sizes Machine Screw Sizes Threads per Inch Plug TAPS Customer Service
155 Spiral Point Taps Machine Screw Size Spiral Point Gun Style Hand Taps Tap Sizes Threads per Inch Plug Only, Fractional Sizes H Limit Part / / / / / / / / / / / Tap Sizes Threads per Inch Plug Only, Fractional Sizes H Limit Part / / / / / / / / / TAPS ISO Metric Spiral Point Gun Style Hand Taps Tap Size mm Plug Only, Metric Sizes Pitch mm D Limit Part D D D D D D D D D D D D D D D Tap Size mm Plug Only, Metric Sizes Pitch mm D Limit Part D D D D D D D D D D D D D D D D Note: These metric taps have ANSI shanks TMX, part of the Toolmex Industrial Solutions family TAPS 399
156 Spiral Flute Taps Fast Spiral Fluted Taps TAPS Tap Sizes Threads per Inch Fractional Sizes H Limit Plug Bottoming 1/ / / / / / / / / / / / / / / / / / / Tap Sizes Threads per Inch Machine Screw Sizes H Limit ANSI Dimensions to Table 302 on page 146 Plug Bottoming TAPS Customer Service
157 Combined Tap and Drills Combined Tap and Drills Machine and Fractional Sizes Thread Thread H Drill Size Limit Size Flute 9/ /4 1-7/ / /4 1-7/ / /32 1-5/ / /32 1-5/ / / / /8 2-1/ / /8 2-1/ / /32 2-3/ / /32 2-3/ / /32 2-3/ / /32 2-1/ / /32 2-1/ / / / / / /16 3-1/ / /16 3-1/ / / / / / /8 4-1/ / /8 4-1/ TAPS Metric Sizes Thread Size (mm) Pitch Limits (Inches) Drill (Inches) Drill (Inches) Thread (Inches) Square (Inches) Shank (Inches) Square Size (Inches) Part D3 1-15/16 9/ /32 3/ D4 2-1/8 3/ /2 1/ D4 2-3/8 13/ /8 1/ D5 2-1/2 17/ /32 5/ D5 2-27/32 11/ /16 3/ D6 3-3/8 13/ /16 7/ D6 4-1/16 1-1/ /8 7/ TMX, part of the Toolmex Industrial Solutions family TAPS 401
158 Tap and Drill Sets 18 Piece Tap and Drill Sets National Coarse TAPS Tap Size National Fine Hand & Spiral Point Tap and Drill Set Drill Size 6-32 P # P # P # P #21 P #7 P P P U P 27/64 Set Spiral Point Set See page 126 for Tap Wrenches Spiral Point Tap and Drill Set Tap Size Drill Size 6-32 P # P # P # P #21 P #7 P P P U P Set Metric Sizes Tap Size mm Hand Tap and Drill Set Drill Size mm P 2.05 P 2.50 P 2.90 P 3.30 P 4.20 P 5.00 P 6.70 P 8.50 P Set Tap Size mm Spiral Point Tap and Drill Set Drill Size mm P 2.05 P 2.50 P 2.90 P 3.30 P 4.20 P 5.00 P 6.70 P 8.50 P Set TAPS Customer Service
159 Pipe Taps Taper Pipe Taps, NPT and NPTF Straight Pipe Taps, NPS and NPSF Tap Size (Pipe) Threads per Inch of Flutes of Thread NPT Part Taper NPTF Dry Seal Part NPS Part Straight NPSF Dry Seal Part 1/ /8 11/ /8 3/ /8 3/ / /16 1-1/ / /16 1-1/ / /8 1-3/ / /4 1-3/ / /4 1-3/ /4 11-1/ / /2 11-1/ /4 1-3/ / /2 1-3/ / /2 2-9/ / /4 2-3/ TAPS * small shank =.3125 and large shank =.4375 TMX, part of the Toolmex Industrial Solutions family TAPS 403
160 Pipe Taps Interrupted Thread Pipe Taps, NPT and NPTF Tap Size (Pipe) Threads per Inch of Flutes of Thread NPT NPTF 1/ /8 11/ / /8 3/ / /16 1-1/ / /16 1-1/ / /8 1-3/ / /4 1-3/ / /4 1-3/ /4 11-1/ / /2 11-1/ /2 1-3/ / /2 1-3/ TAPS Long Taper Pipe Taps, NPT Tap Size (Pipe) Threads per Inch Shank 4 OAL 6 OAL 8 OAL 12 OAL 1/ / / / / / TAPS Customer Service
161 Dies TABLE OF CONTENTS DIES Straight Pipe NPS Taper Pipe NPT Heavy Duty Die Stocks Round Adjustable Split Dies Round Adjustable Split Dies, Special Threads Round Adjustable Split Dies, Special Threads, Left Hand Metric Round Adjustable Split Dies DIES TMX, part of the Toolmex Industrial Solutions family DIES 405
162 Dies DIES 406 DIES Customer Service
163 Dies Straight Pipe NPS Size Threads per Inch OD Part 1/ / / / / / / / / / / /2 2-1/ /4 11-1/ Taper Pipe NPT Size Threads per Inch OD Part 1/ / / / / / / / / / / / /2 2-1/ /4 11-1/ /2 11-1/ / / DIES Die Part 13/16 6-1/ / / / TMX, part of the Toolmex Industrial Solutions family DIES 407
164 Dies DIES Nominal Size National Coarse Thread Threads per Inch OD Part # / # / # / # / # / # / / / / / # # # # # # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /8 5-1/ / / / Nominal Size National Fine Thread Threads per Inch OD Part # / # / # / #* 36 13/ # / # / / / / / # # # # # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / DIES Customer Service
165 Dies Size Threads per Inch OD 7/ / / / # / # / # / # / # / # / # / # / / # # # / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Size Threads per Inch OD 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / DIES TMX, part of the Toolmex Industrial Solutions family DIES 409
166 Dies Right Hand (continued) DIES Size Threads per Inch OD / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Size Threads per Inch OD 1-3/ / / / / / / / / / / / / / / / / / / / / / / / /4 4-1/ / / / / / / / / Left Hand Size Threads per Inch OD # / # / # / # / # / # / # # # # / / / / / / / / / / / / / / / / / / / / / Size Threads per Inch OD 3/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / DIES Customer Service
167 Dies Left Hand Size Millimeter Pitch OD Size Millimeter Pitch OD DIES TMX, part of the Toolmex Industrial Solutions family DIES 411
168 Dies DIES Size mm Pitch mm Coarse Pitch OD.60 13/ / / / / / / / / / / / / Size mm Pitch mm Fine Pitch OD.5 13/ / / / / / / / / / / / / / / / / / / / / / / / / / DIES Customer Service
169 Broaches and Tool Bits TABLE OF CONTENTS BROACHES AND TOOL BITS BROACHES Individual Keyway Broaches Keyway Broach Sets TOOL BITS Carbide Tipped Tool Bits Ground Tool Bits BROACHES / TOOL BITS TMX, part of the Toolmex Industrial Solutions family BROACHES AND TOOL BITS 413
170 Broaches Individual Keyway Broaches Fractional Sizes Keyway Keyway Broach Part Shims of Cut Nominal Decimal Required Width Range W L Minimum Maximum 1/16-AA 1/ / / / /8-AA 1/ /8 0 19/ / / / / / / / /64 2-1/ /64 2-1/ /64 2-1/ /64 2-1/ /16-DD 9/ / / /2-DD 9/ /8-EE 15-1/ / / / BROACHES / TOOL BITS Metric Standard, ISO Keyway Keyway Broach Dimensions (Inches) Standard Part Shims of Cut Nominal Decimal Millimeter Required Width Range W L Keys Minimum Maximum 1/ X 2 1-1/ / / /4 1 4 X 4 19/64 1/4 1 5 X 5 16/ X 5 25/64 2-1/ X 6 25/64 2-1/ /64 2-1/2 9/ X / X / X /2 16 X /2 18 X /4 20 X / X / X / X BROACHES AND TOOL BITS Customer Service
171 Broaches Sets Keyway Broach Sets Broaches Included Keyway combinations Collared Bushings Included American Standard Set A Metric Standard Sets A D A Shims for Keyway Broaches Inch & Metric D 5/16" BROACHES / TOOL BITS TMX, part of the Toolmex Industrial Solutions family BROACHES AND TOOL BITS 415
172 Carbide Tipped Tool Bits Carbide Tipped Tool Bits Turning Style A 0º Lead Angle Turning Style B 15º Lead Angle BROACHES / TOOL BITS Tool Style Right Hand Left Hand Square Shank Package Quantities #4 - #6: 10 per package #7 - #10: 5 per package #12: 2 per package #16: 1 per package OAL Nose Blank Right d L R Hand Turning Style A Grade C2 Left Hand Right Hand Grade C5 Left Hand AR4 AL4 1/4 2 1/ AR5 AL5 5/16 2-1/4 1/ AR6 AL6 2-1/2 1/ AR8 AL8 1/ AR10 AL10 5/ AR12 AL12 4-1/ AR16 AL Turning Style B 1/4 2 1/ /16 2-1/4 1/ /2 1/ / / / BROACHES AND TOOL BITS Customer Service
173 Carbide Tipped Tool Bits Carbide Tipped Tool Bits Turning/Facing Style C Square End Chamfering Style D 80º Included Angle Threading Style E 60º Included Angle Tool Style Square Shank OAL Nose Radius Blank Grade C2 Grade C5 Turning/Facing Style C 1/ /16 2-1/ / / / / Chamfering Style D D4 1/4 2 1/ D5 5/16 2-1/4 1/ D6 2-1/2 1/ D8 1/ D10 5/ D12 4-1/ D Threading Style E E4 1/ E5 5/16 2-1/ E6 2-1/ E8 1/ E10 5/ E12 4-1/ E Carbide Tipped Tool Bits Package Quantities #4 - #6: 10 per package #7 - #10: 5 per package #12: 2 per package #16: 1 per package BROACHES / TOOL BITS Cut-Off: Styles CTR and CTL Right Hand Tool Style Left Hand Tip Width Shank d h L Right Hand for Styles CTR and CTL Grade C2 Grade C5 Left Hand Right Hand Left Hand 1/8 1/ / /4 1/ /16 1/ /8 1-1/ TMX, part of the Toolmex Industrial Solutions family BROACHES AND TOOL BITS 417
174 Ground Tool Bits Ground Tool Bits Rectangular Dimensions HSS 1/4 x 1/2 x 4 1/4 x 1 x 6 Round Dimensions HSS /4 x 4 5/16 x 4-1/ /2 x 6 9/16 x 6 5/8 x 6 1/8 x /4 x /16 x 8 BROACHES / TOOL BITS Dimensions Square HSS Cobalt Steel 1/8 x 2-1/ /4 x 2-1/ /16 x 2-1/ /16 x /2 x 4 5/8 x 4-1/ Dimensions Square Long HSS Cobalt Steel 1/4 x /4 x /4 x /16 x /16 x /2 x 6 1/2 x 8 5/8 x BROACHES AND TOOL BITS Customer Service
175 Index By Group Group Description Page # F SC Single End End Mills Std Len Uncoated F SC Single End End Mills Std Len Uncoated F SC Single End End Mills Std Len Altin F SC Single End End Mills Std Len Altin F SC Single End End Mills Std Len Ball Uncoated F SC Single End End Mills Std Len Ball Uncoated F SC Single End End Mills Std Len Ball Altin F SC Single End End Mills Std Len Ball Altin F SC Single End End Mills Long Len Uncoated F SC Single End End Mills Long Len Uncoated F SC Single End End Mills Long Len Ball Uncoated F SC Single End End Mills Long Len Ball Uncoated F SC Single End End Mills Long Len Ball Altin F SC Single End End Mills Long Len Ball Altin F SC Single End End Mills Long Len Ball Altin F SC Single End End Mills Long Len Ball Altin F SC Double End End Mills Square End, Uncoated F SC Double End End Mills Square End, Uncoated F SC Double End End Mills Weldon Shank Square End F SC Double End End Mills Weldon Shank Square End F SC Double End EndMills Weldon Shank Ball End F SC Double End EndMills Weldon Shank Ball End F SC Variable Helix Corner Radius End Mills Altin F SC Variable Helix Corner Radius End Mills Altin F SC Variable Helix Ball End Mills Altin F SC Roughing End Mills Uncoated F SC Roughing End Mills Altin F SC Roughing End Mills, Long, Uncoated F SC Roughing End Mills, Long, Coated F SC 45 Helix End Mills Altin f SC 45 End Mills for Aluminum F SC 45 End Mills for Aluminum F SC Long Len End Mills for Aluminum F SC Long Len End Mills for Aluminum F SC Metric End Mills Square End, Uncoated F SC Metric End Mills Square End, Uncoated F SC Metric End Mills Ball End, Uncoated INDEX BY GROUP TMX, part of the Toolmex Industrial Solutions family continued on next page INDEX BY GROUP 419
176 Index By Group Group Description Page # INDEX BY GROUP F SC Metric End Mills Ball End, Uncoated F SC Metric End Mills Square End, Coated , F SC Metric End Mills Ball End, Coated F SC Metric End Mills Ball End, Coated F 90 Point Angle Drill Mills Uncoated F 90 Point Angle Drill Mills Uncoated F 90 Point Angle Drill Mills Altin F 90 Point Angle Drill Mills Altin SC Jobber Drills, Fractional Sizes SC Jobber Drills, Letter Sizes SC Jobber Drills, Sizes High Performance 5XD Coolant Fed Drills High Performance 5XD Coolant Fed Drills, Metric High Performance 8XD Coolant Fed Drills, Metric Carbide Burrs, SB Carbide Burrs, SC Carbide Burrs, SD Carbide Burrs, SE Carbide Burrs, SF Carbide Burrs, SG Carbide Burrs, SH Carbide Burrs, SL Carbide Burrs, SM TMX Slitting & Slotting Saw Arbors TMX Slotting Saw Arbor, Weldon Shank Heavy Duty Die Stocks 3-Screw Type Straight Shank Straight Flute Hand Reamers Straight Shank Straight Flute Hand Reamers Metric - DIN 206/A Straight Shank Helical Flute Hand Reamers Straight Shank Helical Flute Hand Reamers Metric - DIN 206/B Adjustable Blade Reamers HSS Expansion Hand Reamer Straight Flute HSS Expansion Hand Reamers, Spiral Flute Straight Shank Straight Flute Chucking Reamers Straight Shank Straight Flute Chucking Reamers Sizes INDEX BY GROUP Customer Service
177 Index By Group Group Description Page # Straight Shank Straight Flute Chucking Reamers Letter Sizes Straight Shank Straight Flute Chucking Reamers Decimal Sizes Straight Shank Straight Flute Chucking Reamers Metric - DIN Straight Shank Helical Flute Chucking Reamers Straight Shank Straight Flute Chucking Reamers Cobalt Steel(M42) Taper Shank Straight Flute Chucking Reamers Taper Shank Straight Flute Chucking Reamers Metric - DIN Taper Shank Helical Flute Chucking Reamers Expansion Chucking Reamers Straight Shank Straight Flute RH Expansion Chucking Reamers Morse Taper Shank Straight Flute RH Taper Shank Helical Flute Bridge Reamers 5F Taper Shank Straight Flute Bridge Reamers 5F HSS Car Reamers Taper Shank Spiral Flute LH HSS Car Reamers Straight Shank 3 Equal Flats, LH HSS Car Reamers HEX Shank Spiral Flute, LH Taper Pipe Reamers Straight Flute, HSS Taper Pipe Reamers Spiral Flute, HSS HSS Tool Bits Ground, Round HSS Tool Bits Ground, Square HSS Tool Bits Ground Rectangular Cobalt M35 Tool Bits Ground, Square Taper Pin Reamers Straight Flute Taper Pin Reamers Metric DIN 9/A Straight Flute Taper Pin Reamers Spiral Flute Taper Pin Reamers MetricDIN 9/B Spiral Flute Taper Pin Reamers Helical Flute Jobber Drills Fractional Sizes...266, Jobber Drills Sizes...267, Jobber Drills Letter Sizes...268, Jobber Drills Metric Sizes , Jobber Drills Split Point Fractional Sizes...271, Jobber Drills Split Point Sizes Jobber Drills Split Point Letter Sizes Jobber Drills Split Point Metric Sizes Shell Reamers Straight Flute Shell Reamers Helical Flute Cobalt 135 Split HD Jobber Drill...276, HSS Jobber Drills 118 Point...260, 281 INDEX BY GROUP TMX, part of the Toolmex Industrial Solutions family continued on next page INDEX BY GROUP 421
178 Index By Group Group Description Page # INDEX BY GROUP Straight Shank Twist Drills Metric Sizes 118 Point , Spotting & Centering Drills HSS NC Spotting Drills HSS Silver & Deming Drills 1/2in Shank HSS , Metric Silver & Deming Drill 1/2inSh HSS Silver & Deming Drills 3/4in Shank HSS...289, Silver & Deming Drill 1/2in Shank M42Cobalt , HSS Jobber Drills Sizes...261, Cobalt 135 Split, HD Jobber Metric Sizes Cobalt 135 Split, HD Jobber Sizes...277, HSS Jobber Drills Letter Sizes...251, 262, Point Ext Len Split Drill, Black Fractional Sizes Point Ext Len Split Drill, Black Sizes Cobalt 135 Split HD Jobber Letter Sizes...278, Point 12in Len Split Drill, Black Fractional Sizes Point 12in Len Split Drill, Black Fractional Sizes HSS Taper Shank Drills 118 Point HSS Taper Shank Drill Metric Sizes 118 Point Stub Taper Shank Drills Miscellaneous Drills and Sets...262, Straight Shank4F Core Drills Taper Shank 4F Core Drills HSS 2 Flute Ball End Mills Cobalt M42 2 Flute Ball End Mills HSS MultiFlute Ball End Mills Center Cutting Cobalt M42 MultiFlute Ball End Mill Center Cutting HSS 2 Flute Ball Double End Mills HSS, 2 Flute Double End Mills Cobalt M42 2 Flute Double End Mills HSS Centercut 4 Flute Double End Mills Cobalt M42 4 Fl Centercut Dbl End Mills HSS 2 Flute Single End End Mills Cobalt M42 2 Flute Single End End Mills HSS Metric 2 Flute Single End End Mills HSS Centercut MultiFlute Single End End Mills Cobalt M42 MultiFLute Centercut Single End End Mills HSS Metric 4 Flute Single End End Mills Centercut F Long Single End End Mills Extension Type INDEX BY GROUP Customer Service
179 Index By Group Group Description Page # HSS Centercut MultiFlute Long Single End End Mills Cobalt M42 MultiFl Centercut Long Len E/M F HD End Mill with Twin Drive Shank F End Mills Long Len Non-Extension HSS Centercut MultiFlute End Mills Extra Long Rough End Mills Coarse Tooth M42 Cobalt Ground Shell End Mills RH HSS TMX Annular Cutters HSS HSS Corner Rounding End Mills Combined Drill & Countersink Plain Type RH HSS Combined Drill & Countersink Plain 60 RH M42 Cobalt Long Combined Drill & Countersink RH HSS Combined Drill & Countersink Metric DIN 333A RH HSS Combined Drill & Countersink Bell Type RH HSS Capscrew Counterbores Straight Shank 3F HSS Capscrew Counterbores Taper Shank 3F HSS Capscrew Counterbores Metric Straight Shank 3F HSS Fillister Head Counterbores Fillister Head Counterbores Flute Counterbores & Deburring Tools HSS Single Flute Countersinks HSS Flute Center Reamers HSS Flute Machine Countersinks HSS Flute Chatterless Countersinks HSS...326, Power Hacksaw Blades HSS Single Angle Chamfering Shank Cutters HSS Double Angle Shank Cutters HSS Convex Radius Shank Cutters HSS Concave Radius Shank Cutters Convex Cutters Concave Cutters Plain Tooth Side Milling Cutters Staggered Tooth Side Milling Cutters Single Angle Cutters RH Single Angle Cutters LH Double Angle Cutters HSS Dovetail Cutters Cobalt M42 Dovetail Cutters INDEX BY GROUP TMX, part of the Toolmex Industrial Solutions family continued on next page INDEX BY GROUP 423
180 Index By Group Group Description Page # INDEX BY GROUP Straight Tooth ½in Shank Woodruff Keyseat Cutters Staggered Tooth ½in Shank Woodruff Keyseat Cutters Screw Slotting Saws Jewelers Saws Plain Slitting Saws Plain Tooth Metal Slitting Saws with Side Chip Clearance Staggered Tooth Metal Slitting Saws with Side Chip Cleanance HSS Hand Taps Ground RH Fractional Sizes , HSS Hand Taps Ground RH Mach Screw Size HSS Hand Taps Ground LH HSS Fast Spiral Fluted Taps, Ground RH Fractional HSS Fast Spiral Fluted Taps, Ground RH Machine Screw HSS Straight Pipe Taps, NPS Ground RH HSS Taper Pipe Taps, NPT Ground RH HSS Straight Pipe Taps, NPSF Ground RH Dry Seal HSS Taper Pipe Taps, NPTF Ground RH HSS Taper Pipe Taps, NPT Interrupted Thread Ground HSS Long Taper Pipe Taps, NPT Ground RH Taper Pipe Tap NPTF Interrupted Thread Ground HSS Spiral Point Taps RH Ground Fractional HSS Spiral Point Taps RH Ground Machine Screw ISO Metric HSS Hand Taps Ground RH ISO Metric HSS Hand Tap Spiral Point Ground Combination Tap and Drills HSS Combination Tap and Drills HSS Metric Tap & Drill Sets HSS HSS Adjustable Round Split Dies NC HSS Coarse ISO Metric Round Adjustable Dies Inch OD HSS Adjustable Round Split Dies NF HSS Fine ISO Metric Round Adjustable Dies Inch OD HSS Adjustable Round Dies Special Threads HSS Adjustable Round Dies Special Threads LH HSS Adjustable Round Dies Metric LH Straight Pipe Adjustable Round Dies NPS HSS Taper Pipe Adjustable Round Dies NPT HSS Involute Gear Cutters 14½ Pressure Angle Involute Gear Cutters 20 Pressure Angle Metric Keyway Broaches HSS INDEX BY GROUP Customer Service
181 Index By Group Group Description Page # Keyway Broaches Metric HSS Shims for Keyway Broaches, Inch & Metric Brazed Tools Carbide Tip C2/K20 Grade Brazed Tools Carbide Tip C5/P30 Grade Carbide Tipped Cut-Off Tool C2/K20 Grade Carbide Tipped Cut-Off Tool C5/P30 Grade End Mills, APKT End Mills, ADKT Toolholders, MRGNR/L for RN Inserts Toolholders, MSKNR/L for CN Inserts Toolholders, MCLNR/L for CN Inserts Toolholders, MCMNN for CN Inserts Toolholders, MCRNR/L for CN Inserts Toolholders, MDPNN for DN Inserts Toolholders, MDJNR/L for DN Inserts Toolholders, MSDNN for SN Inserts Toolholders, MSSNR/L for SN Inserts Toolholders, MSRNR/L for SN Inserts Toolholders, MSKNR/L for SN Inserts Toolholders, MTJNR/L for TN Inserts Toolholders, MTENN for TN Inserts Toolholders, MTGNR/L for TN Inserts Toolholders, MTFNR/L for TN Inserts Toolholders, MWLNR/L for WN Inserts Toolholders, MVVNN for VN Inserts Toolholders, MVJNR/L for VN Inserts Boring Bars, SI-MCLNR/L for CN Inserts Boring Bars, SI-MWLNR/Lfor WN Inserts Boring Bars, SI-MDUNR/L for DN Inserts Boring Bars, SI-MTUNR/L for TN Inserts Boring Bars, SI-MVUNR/L for VN Inserts Toolholders, SCLCR/L for CC Inserts Toolholders, SCMCN for CC Inserts Toolholders, SDPCN for DC Inserts Toolholders, SDJCR/L for DC Inserts Toolholders, SVJCR/L for VC Inserts Toolholders, SSDCN for SC Inserts INDEX BY GROUP TMX, part of the Toolmex Industrial Solutions family continued on next page INDEX BY GROUP 425
182 Index By Group Group Description Page # INDEX BY GROUP Toolholders, STECN for TC Inserts Toolholders, STFCR/L for TC Inserts Toolholders, STGCR/L for TC Inserts Toolholders, STJCR/L for TC Inserts Boring Bars, SI-SCLCR/L for CC Inserts...195, Boring Bars, SI-SDUCR/L for DC Inserts Boring Bars, SI-STUCR/L for TC Inserts , Boring Bars, SI-SVUCR/L for VC Inserts Boring Bars, SI-SWUCR/L for WC Inserts PC Mini Toolholder & Boring Bar Set P&G GTN System Blades P&G GTN System Flexible Clamp Tool Blocks P&G GTN System Blade & Inserts Sets P&G GTN System Blade Block Inserts Sets P&G GTN System 2 Piece Tool Blocks End Mills, TP End Mills, TP, R8 Shank...35, Face Mills, TP Face Mills, SE Face Mills, SE 42, Heavy Duty Boring Bars, SI-CTUPR for TP Inserts End Mills, APKT 16, R8 Shank...18, Face Mills, APKT Face Mills, APKT Face Mills, APKT 16, Lead Ext End Mills, APKT 10 & APKT 16, Lead Ext Face Mills, SEHT Face Mills, OFMT AN10EM End Mills, ANHX AN10FM Face Mills, ANHX AN16EM End Mills, ANHX AN16FM Face Mills, ANHX AP10EM End Mills, APKT AP16EM End Mills, APKT MTHO P&G TNMA System External Holders MTHO-S P&G TNMA System Internal Holders MTVO P&G TNMA System External Holders NE P&G Notch System Ext Gang Style Holders INDEX BY GROUP Customer Service
183 Index By Group Group Description Page # 6-NE-S P&G Notch System Internal Holders NS P&G Notch System External Holders PNFM Face Mills, PNHX RDEM End Mills, RD-TORO RDFM Face Mills, RD-TORO RDFMAC Face Mills, RD-TORO Anti Rotation Clamp SCI-3X Indexable Drills, 3X SCI-4X Indexable Drills, 4X SCS-3X Indexable Drills Metric, 3X SCS-4X Indexable Drills Metric, 4X SERL Threading Toolholders, SER/SEL External SIRL Threading Toolholders, SIR/SIL Internal SNFM Face Mills, SNHX SP13FM HI-Feed Face Mills, SPKT13, SPKW SP16FM HI-Feed Face Mills, SOE_ SPEM HI-Feed End Mills, SPKT WNFM High Feed Face Mills, WNMW WNFMCS High Feed Face Mills, Clamping WNMW XDEM End Mills, XDKT XDFM Face Mills, XDKT INDEX BY GROUP Annular Cutter Holder Strght 3-Flat Sh Annular Cutter Holders Morse Taper Shank Annular Cutter Holders R8 Shank Annular Cutter Holder Strght 2-Flat Sh TMX, part of the Toolmex Industrial Solutions family INDEX BY GROUP 427
184 Indexable Appendix INDEXABLE APPENDIX Tools Milling Tools Page # END MILLS End Mills, ADKT End Mills, ANHX End Mills, ANHX End Mills, APKT End Mills, APKT 10 & APKT 16, Lead Ext End Mills, APKT End Mills, APKT 16, R8 Shank , 66 End Mills, APKT End Mills, HI-Feed, SPKT End Mills, RD-TORO End Mills, TP End Mills, TP, R8 Shank... 35, 67 End Mills, XDKT FACE MILLS Face Mills, ANHX Face Mills, ANHX Face Mills, APKT Face Mills, APKT Face Mills, APKT 16, Lead Ext Face Mills, HI-Feed, SOE_ Face Mills, HI-Feed, SPKT13, SPKW Face Mills, High Feed, Clamping WNMW Face Mills, High Feed, WNMW Face Mills, OFMT Face Mills, PNHX Face Mills, RD-TORO Face Mills, RD-TORO Anti Rotation Clamp Face Mills, SE Face Mills, SE 42, Heavy Duty Face Mills, SEHT Face Mills, SNHX Face Mills, TP Face Mills, XDKT INDEXABLE APPENDIX Customer Service
185 Indexable Appendix Tools Turning Tools Page # BORING BARS 5-PC Mini Toolholder & Boring Bar Set SI-CTUPR for TP Inserts SI-MCLNR/L for CN Inserts SI-MDUNR/L for DN Inserts SI-MTUNR/L for TN Inserts SI-MVUNR/L for VN Inserts SI-MWLNR/Lfor WN Inserts SI-SCLCR/L for CC Inserts , 198 SI-SDUCR/L for DC Inserts SI-STUCR/L for TC Inserts , 198 SI-SVUCR/L for VC Inserts SI-SWUCR/L for WC Inserts INDEXABLE APPENDIX TOOL HOLDERS MCLNR/L for CN Inserts MCMNN for CN Inserts MCRNR/L for CN Inserts MDJNR/L for DN Inserts MDPNN for DN Inserts MRGNR/L for RN Inserts MSDNN for SN Inserts MSKNR/L for CN Inserts MSKNR/L for SN Inserts MSRNR/L for SN Inserts MSSNR/L for SN Inserts MTENN for TN Inserts MTFNR/L for TN Inserts MTGNR/L for TN Inserts MTJNR/L for TN Inserts MVJNR/L for VN Inserts MVVNN for VN Inserts MWLNR/L for WN Inserts SCLCR/L for CC Inserts SCMCN for CC Inserts SDJCR/L for DC Inserts SDPCN for DC Inserts SSDCN for SC Inserts STECN for TC Inserts continued on next page TMX, part of the Toolmex Industrial Solutions family INDEXABLE APPENDIX 429
186 Indexable Appendix INDEXABLE APPENDIX Tools Turning Tools Page # TOOL HOLDERS STFCR/L for TC Inserts STGCR/L for TC Inserts STJCR/L for TC Inserts SVJCR/L for VC Inserts Parting and Grooving Tools GTN SYSTEM 2 Piece Tool Blocks Blade & Inserts Sets Blade Block Inserts Sets Blades Flexible Clamp Tool Blocks TOOL HOLDERS Notch System External Notch System External Gang Style Notch System Internal TNMA System External TNMA System External TNMA System Internal Threading Tools TOOL HOLDERS SER/SEL External SIR/SIL Internal Drilling Tools DRILLS Indexable Drills, 3X Indexable Drills, 3X Metric Indexable Drills, 4X Indexable Drills, 4X Metric INDEXABLE APPENDIX Customer Service
187 Indexable Appendix Inserts Insert Letters Page # Reference ADKT Milling ANHX...28 Milling APKT , 66 Milling APXT...23 Milling CCGT Turning CCMT Turning CNMA Turning CNMG Turning DCGT Turning DCMT Turning DNMA Turning DNMG Turning GTN Parting & Grooving NG Parting & Grooving NR Parting & Grooving NT Parting & Grooving OFKR Milling OFMT...52 Milling PNHX...41 Milling RDHT Milling RDHW...56 Milling RDMW...56 Milling RNMG Turning RPGN Turning SCMT Turning SDNT Utility SEAN Milling SEGT...43 Milling SEHT Milling SEKN...46 Milling SEKR...46 Milling SEKT...43 Milling SNGN , Utility SNHX Milling SNMA Turning SNMG Turning SNUN , Utility SOEW...60 Milling SPGH Turning INDEXABLE APPENDIX TMX, part of the Toolmex Industrial Solutions family continued on next page INDEXABLE APPENDIX 431
188 Indexable Appendix INDEXABLE APPENDIX Inserts Insert Letters Page # Reference SPGN , Utility SPKT...60 Milling SPKW...60 Milling SPMR Turning SPMT....81, Utility SPUN , Utility TCGT Turning TCMT Turning THR-AD Stub Acme Threading THR-AR API Round Threading THR-IS ISO Metric Threading THR-N NPT Threading THR-NF NPTF Threading THR-P5 Partial Profile Threading THR-P6 Partial Profile Threading THR-U UN (UNC, UNF, UNEF) Threading THR-UJ UNJ Threading TNMA Turning TNMA On Edge Parting & Grooving TNMG Turning TPEE Turning TPGC Turning TPGH Turning TPGN , 68, 82-88, Utility TPKN....36, 68, 82 Utility TPKR , 68 Utility TPMR , 68, 82-85, Utility TPUN....37, 82-88, Utility VBMT Turning VCGT Turning VCMT Turning VNMA Turning VNMG , 125 Turning WCM Turning WNMA Turning WNMG Turning WNMW...63 Milling XDKT Milling 432 INDEXABLE APPENDIX Customer Service
189
190 Natick, MA Corporate Headquarters 1075 Worcester Street Natick, MA C 2014 Toolmex Corporation, Inc TMX-TOOL Fax
+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationMetal Drilling. Engineered for Controlled Precision and Speed METAL DRILLING. Tip Geometry. Drill Bit Selection. 135 Split Point
Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : Point Angle: Drill Diameter: Shank : : Tip Geometry 118 Conventional Point 118 Point Angle 135 Split
More informationMetal Drilling
www.irwin.com Metal Drilling Engineered for Controlled Precision and Speed Shank Diameter Shank Point Angle Drill Bit Diameter : The length from the point to the end of the drill bit Point Angle: The angle
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationHigh Performance HSSE Color Ring Tap Speeds
Torque Cut High Performance HSSE Color Ring Taps RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and a variety of other Steels
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower UNIVERSAL TAPS. power ful. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER UNIVERSAL TAPS SAL UNIVERSAL
MADE BY UNIVERSALtaps TOP QUALITY FROM GERMANY at a Power Price TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT Form universal
More informationCARBIDE END MILLS SPECIFICATIONS
SPECIFICATIONS COATING GUIDE Material Hardness TiN TiCN TiALN Austentic Stainless Steel < 35 HRc * X Martinistic Stainless Steel < 35 HRc * X Martinistic Stainless Steel >= 35 HRc X PH Stainless Steel
More informationMELIN TOOL COUNTERSINKS
MELIN TOOL COUNTERSINKS TABLE OF CONTENTS GENERAL PURPOSE Zero Flute, Single Edge - HSS Zero Flute, Single Edge - Cobalt HSS Single Flute - HSS Single Flute - Cobalt HSS (M42) Single Flute, TiN Coated
More informationTRAINING MANUAL. Part INTRODUCTION TO TWIST DRILLS
PRESTO INTERNATIONAL UK LTD TRAINING MANUAL Part 2 INTRODUCTION TO TWIST DRILLS - 1 - DEFINITION:- A rotary end cutting tool having two or more cutting lips, and having two or more spiral (helical) or
More informationDrills, Annular Cutters Countersinks Counterbores Reamers, Accessories
A Drills, Annular Cutters Countersinks Counterbores Reamers, Accessories A Decimal Equivalent Chart................ A2 Jobber Drill Dispensers................. A3 Drill Cabinets Complete Dispenser Cabinets
More informationFax Web Phone APX150 Milling Machine Power Feed X Traverse 150Lbs Torque
90V Premium CNC Milling Machine Vise "x8.9" APX0 Milling Machine Power Feed X Traverse 0Lbs Torque ~7 P0 0-099 $0.00 90º Square Shoulder Indexable Coolant Thru Face Mills * Insert Not Included APKT PDER
More informationICS CUTTING TOOLS, INC 511 Main Street Casco, WI USA (920) Fax (920)
ICS CUTTING TOOLS, INC 511 Main Street Casco, WI 54205-0125 USA (920) 837-2526 Fax (920) 837-2530 www.icscuttingtools.com info@icscuttingtools.com COMBINED DRILL & COUNTERSINKS COBALT PLAIN TYPE...5 BELL
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationThread Mills. Solid Carbide Thread Milling Cutters
Thread Mills Solid Carbide Thread Milling Cutters Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than indexable
More informationSolid Carbide Thread Milling Cutters
Solid Carbide Thread Milling Cutters Second Edition Thread milling cutters by Features and Benefits: Sub-micro grain carbide substrate Longer tool life with tighter tolerances More cost-effective than
More informationDrilling & Metal Cutting Tools Drills Reamers Countersinks Counterbores Accessories. Hole Making Tools Hole Saws Annular Hole Cutters
Quick Index Drilling & Metal Cutting Tools Drills Reamers Countersinks Counterbores ccessories Hole Making Tools Hole Saws nnular Hole Cutters Threading Tools Taps Dies Extractors Thread Inserts ccessories
More informationAircraft Quality Reamers and Special Tooling
C A T A L O G 2 6 www.reamers.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 AIRCRAFT QUALITY REAMERS AND SPECIAL TOOLING P R O V E N P R E C I S I O N Since 1881,
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationPRODUCT CATALOG. Chisholm, MN USA
PRODUCT CATALOG Chisholm, MN USA 800-942-1501 TABLE OF CONTENTS Series Description Page # 800...General Purpose, 118 Point, Jobber Length, Wire, Black Oxide, HSS...4 801...General Purpose, 118 Point, Jobber
More informationJobber Length Hi-Helix 118º point. Screw Machine Length NAS 907C
Table of Contents Twist Drills Jobber Length NAS 907B Heavy Duty 135º Split point Type 240-UB Heavy Duty Ultra Bor.. 6-7 Type 643-UB................... 8-9 *Type 278-UB 3/8" Shank......... 7 Type 240-A
More informationSTEEL BLANKS. u f q t PRECISION GROUND HIGH SPEED. CALL TOLL FREE CATALOG AVAILABLE ON CD ROM
INSPECTION & GAGING TOOLS SHOP TOOLS & SUPPLIES CUTTING TOOLS LINEAR MOTION COMPONENTS MOLD & DIE SUPPLIES PRECISION GROUND HIGH SPEED STEEL BLANKS DRILL & REAMER BLANkS INSPECTION & GAGING CALL TOLL FREE
More informationCutting Tools DRILLS TO 16 TAPS & DIES TO 10 SAW BLADES & CUTTERS TO 10 FILES TO 4 MISC CUTTING TOOLS TO 8
CUTTING TOOLS Cutting Tools SECTION PAGE NO. DRILLS -1-1 TO 1 TAPS & DIES -2-1 TO 10 SAW BLADES & CUTTERS -3-1 TO 10 FILES -4-1 TO 4 MISC CUTTING TOOLS -5-1 TO 8 TABLE OF CONTENTS 1 DRILLS DRILL DECIMAL
More informationBASIC TECHNICAL INFORMATION FOR REAMERS FLUTE STYLES
BASIC TECHNICAL INFORMATION FOR HANNIBAL CARBIDE would like to inform you of some basic technical knowledge regarding reamers. Following these guidelines will reduce overall set-up time, while increasing
More informationINTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS
INTRODUCING YG-1 TAPS COLOUR BAND MACHINE TAPS HAND TAPS PIPE TAPS TAP SELECTION GUIDE HAND TAPS 3 SPIRAL POINT TAPS Plug Style 4 SPIRAL FLUTE TAPS Bottoming Style 5 SPIRAL POINT TAPS Plug Style 6-7 SPIRAL
More informationTUBE AND SHEET DRILLS
TUBE AND SHEET DRILLS 03 Tube and sheet drills The flutes of the RUKO high performance tube and sheet drills are BN ground from the solid hardened form. Because BN (cubical boron nitride) is a much harder
More informationYour Specials Are Our Standards TM
09/2010 TM Your Specials Are Our Standards TM 400 New Tools Inside! See Inside Cover For Details ALL TOOLS IN STOCK! SAME DAY SHIPPING! Harvey Tool Company, LLC 319 Newburyport Turnpike Rowley, MA 01969
More informationFeatuRes OF GeOMetRy. synchro tapping chuck (er type) advantages. GUIdE LINE TO ICONS
FeatuRes OF GeOMetRy synchro tapping chuck (er type) advantages GUIdE LINE TO ICONS Working Material GS s with good machinability Rm
More informationINSPECTION & GAGING TOOLS SHOP TOOLS & SUPPLIES CUTTING TOOLS LINEAR MOTION COMPONENTS MOLD & DIE SUPPLIES PAGE PAGE 35-40
INSPECTION & GAGING TOOLS SHOP TOOLS & SUPPLIES CUTTING TOOLS LINEAR MOTION COMPONENTS MOLD & DIE SUPPLIES PRECISION GROUND HIGH SPEED STEEL BLANKS DRILL & REAMER BLANkS INSPECTION & GAGING PAGE -8 CUTTING
More informationDRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES
DRILL SETS-JOBBER, STUB, LETTER & WIRE SIZES JOBBER DRILL SETS 13 Piece -1/16-1/4" x 64ths Material Drill Point Finish Brand HSS 118 Bright Precision Twist Drill PTD-090164 $21.15 HSS 118 Black Oxide Precision
More informationdrill MITSUBISHI CARBIDE New Products LJ293A Large diameter sizes added. Solid carbide drill
MITSUBISHI CARBIDE LJ293A New Products Solid carbide drill Large diameter sizes added. MZ drill Internal and external coolant, multi purpose high performance drill. MZ drill, characteristics and application
More informationAPOLLO. Variable Helix Corner Radius End Mills. Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel
Variable Helix Corner Radius End Mills Excellent for Alloy Steel, Nickel Inconel Alloys, Stainless and Carbon Steel Unequal Flute Design for Chatter Resistance Great for Roughing or Finishing High Performance
More informationPlus Our NEW Quick Delivery Step Drill Program
LE ADING SOLUTIONS FOR CHAMFERED / THRE ADED HOLES Plus Our Quick Delivery Step Drill Program CHAMFERED / THREADED HOLE SOLUTIONS From standard stocked tools to our Quick Delivery Program a full range
More informationKennametal Twist Drills KHSS Drill Dictionary
Kennametal Twist KHSS Drill Dictionary shank diameter tang tang drive axis taper shank shank length neck straight shank point angle helix angle flutes flute length body overall length drill diameter lip
More informationMASONRY DRILL and CHISEL
MASONRY DRILL and CHISEL STRAIGHT SHANK MASONRY DRILL 8 Available in common size Made from carbide alloy Drill tip is welded with YG-carbide alloy steel Content of KW00537: Size: 4, 5, 6, 8, 0mm Content
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationCUTTING TOOLS SECTION Q DEALER PRODUCTS, INC TH ST. GRAND PRAIRIE, TX
CUTTING TOOLS SECTION Q DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Section Q INDEX DEALER PRODUCTS, INC 1185 108TH ST. GRAND PRAIRIE, TX 75050 800-999-8828 Q SECTION INDEX
More informationMETRIC THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. Q A C OAL 60º THREAD MILLS METRIC
METRIC SINGLE PROFILE (SPTM) - SOLID CARBIDE METRIC Q A B 60º C S With just 19 varieties of Thread Mills, fine and coarse threads ranging from M1.2 to M30+ can be milled SPECIALTY PORT - CAVITY INDEXABLE
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationRouter Section 2018 Master Catalog
Router Section 2018 Master Catalog For more than 95 years, M.A. Ford has been at the cutting edge of tooling design and manufacturing and has developed an enviable global reputation for performance and
More informationINDEXABLE BORING BAR AND INSERTS FLAT TOP, CHIP CONTROL, CBN, AND PCD
INDEXABLE BORING BAR AND S FLAT TOP, CHIP CONTROL,, AND 80 Diamond.156 IC R.156.040 80 DIAMOND FLAT TOP 80 DIAMOND CHIP CONTROL AT6+ 0.003 ACD5031 ACD5031E AT6+ 0.007 ACD5071 ACD5071E AT6+ 0.015 ACD5151
More informationYour Specials Are Our Standards
03/2011 TM Your Specials Are Our Standards TM 430 New Tools Inside! See Inside Cover For Details ALL TOOLS IN STOCK! SAME DAY SHIPPING! Harvey Tool Company, LLC 319 Newburyport Turnpike Rowley, MA 01969
More informationPRODUCT LINE CATALOG THU DERTAP. Chisholm, MN USA. A Division of Minnesota Twist Drill.
PRODUCT LINE CATALOG A Division of Minnesota Twist Drill Chisholm, MN USA THU DERTAP Style Page # Style Page # Style Page # Style Page # 2 Style Page # Style Page # Style Page # Style Page # T13CX T1813
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationMission Statement. 2005, Manchester Tool Company. All rights reserved.
Mission Statement Manchester Tool Company shall provide tooling systems to the metal cutting and similar industries, specializing in cutoff, grooving and complimentary niche products. We are dedicated
More informationDiamond-coated Router
Diamond-coated Router Designed primarily for trimming of CFRP, we offer a variety of router styles to accommodate our customers needs including a multi-flute type with nicks for high efficiency, Herringbone
More informationMetal Drilling.
101 ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of solution for every professional application. Each metal drill bit is made of high speed steel with high precision-cut
More informationCONTENTS MILLING TOOLS DRILLING TOOLS THREADING TOOLS OTHER TOOLS
June 2011 CONTENTS MILLING TOOLS DRILLING TOOLS THREADING TOOLS OTHER TOOLS 2 MILLING TOOLS 1) CBN End Mills(Performance Testing #1 & #2) 2) i-xmill Carbide Insert End Mills( Performance Testing, Ball
More informationOptimized flute design Better chip evacuation. Carbide substrate Higher heat resistance, higher speed.
Thread Mills Available for the first time, our solid thread mills are designed to be the highest quality thread milling solution. WIDIA-GTD Cut up to 63 HRC. Improved overall thread quality. Optimized
More informationSYMBOL INDEX HSS V3. Special heat treatment. HSS-Co 8% CARBIDE. Powder Steel High performance ASP 23 BI/CV. GOLD Gold finish HARD LUBE
526 Technical Information GENERAL ICONS DIN DIN Norm TOL Tolerance Standard quality Professional quality Extra porfessional quality Supreme quality MATERIALS High speed steel M2 quality G High speed steel
More informationINDEX. List Price Catalog - Current Pricing On Our Website. List Price Catalog - Check Website For Current Pricing. * = additional sizes added
INDEX List Price Catalog - Check Website For Current Pricing * = additional sizes added PG CATEGORY NOTE 4 Threadmill - UNC/UNF * 5 Threadmill - UNC/UNF (Continued) & Thread Pac 6 Threadmill - NPT/NPTF
More informationSTUB ACME - INTERNAL AND EXTERNAL
STUB ACME - INTERNAL AND EXTERNAL SOLID CARBIDE SINGLE PROFILE ACME Q A 29º B C S Solid carbide for maximum tool rigidity coating for increased performance Single start threads only SPECIALTY PORT - CAVITY
More informationTwist Drills for Woodworkers. Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm
Twist Drills for Woodworkers Standard twist drills and two methods of sharpening 10 January 2015 Marc Pohm Twist Drills for Woodworking Topics that will be covered: Coatings Steel Types Drill Points Drill
More informationSpeed (SFM) Radial DOC x D. .5 x D. 1 x D. .5 x D. 1 x D. .5 x D.
GP High Performance 4 Flute End Mills TyCarb GP High Performance end mills feature Differential flute spacing to achieve virtually chatter free machining in a wide range of materials. Excellent results
More informationMAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS
MAGNETIC DRILL PRESSES AC35 MAGNETIC DRILL PRESS Triple Edge Cutting Features: The CT series features two sets of three cutting tips each with different geometries, balancing and cutting forces. This enables
More informationUN THREAD MILLS SINGLE PROFILE (SPTM) - SOLID CARBIDE. Scientific Cutting Tools, Inc. OAL 60º THREAD MILLS
UN SINGLE PROFILE (SPTM) - SOLID CARBIDE UN Q A B 60º C S Fine and coarse threads ranging from #00 to 1¼ + can be milled using the 19 varieties of these single profile thread mills. SPECIALTY PORT - CAVITY
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA THREAD MILLING
BULLDOG CUTTING TOOLS THREAD MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools
More informationHSS Endmills Cost effective machining - Solutions for slotting, finishing, roughing & profiling - 8% Co & PM grades of HSS - Various shank styles to
EDILL Endmills Cost effective machining - olutions for slotting, finishing, roughing & profiling - 8% Co & grades of - Various shank styles to suit your needs - hort & Long eries - General purpose & Application
More informationInnovative Cutting Tool Solutions. Product Line Card
Innovative Cutting Tool Solutions Product Line Card www.championcuttingtool.com Product Lines Cutting Tool Solutions Jobber XL5 Heavy Duty Sizes - 1/16 to 1/2, Letters & Numbers Stainless steel & tough
More informationCATALOG 27. Aircraft Quality Reamers and Special Tooling.
CATALOG 27 Aircraft Quality Reamers and Special Tooling www.alvordpolk.com Aircraft Quality Reamers and Special Tooling Manufactured in the USA since 1881 Since 1881, Alvord-Polk has been a manufacturer
More informationListed below are some of our most common drill designs used in many various aerospace applications:
www.lomas.co.uk Tools can be manufactured in 3 material choices for use on composites: Solid Tungsten Carbide Tooling CVD Diamond Coated Solid Tungsten Carbide Polycrystalline Diamond (PCD) LOMAS design
More informationTHE NEW GENERATION. Pionex the new generation FLUTELESS MACHINE TAPS
TE NEW GENERATION torque reduction up to 30 % reduced axial forces increased tool life improved surface finish quality ionex the new generation FLUTELESS MACINE TAS GURING YOUR WORLD-WIDE ARTNER ionex
More informationTAP & DIE PRICE LIST INDEX
TAP & DIE PRICE LIST INDEX ANPT Die Page 4 BA Die Page 4 BA Tap Page 17 BSF Tap Page 19 BSB Die Page 4 BSB Tap Page 17 BSCY Tap Page 17 BSF Die Page 3 BSP Die Page 4 BSP Tap Page 18 BSPT Die Page 4 BSPT
More informationBroaching, External External Broach Tool Holders...18 Driven Broach Tool Holder for Multi's External Broaches...19
TABLE OF CONTENTS CATALOG 2017 TITLE PAGE Broaching, Internal Swiss Adjustment Free Broach Tool Holders...8 Swiss Broaching Heads for ER Collet Chucks...7 Adjustable Broach Tool Holders...10 CNC Adj. Free
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationSAVINGS FOR FALL. Electronic Calipers. Resolution: /0.01mm Battery CR2032 Supplied in fitted storage case. Coolant Proof.
INDUSTRIAL INC. TORONTO MONTRÉAL EDMONTON www.kar.ca SAVINGS FOR FALL Purchase 200 of INSIZE product and receive an INSIZE HAT FREE! While Quantities Last INSIDE Savings at a glance... COMBO COMBO COMBO
More informationDrills - Metal - Wood - Masonry - Glass & Tile DRILLS
Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Specialty Materials 8 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel
More informationRT 100 T NEW. Solid carbide spiral-flute deep hole drills. Now from 15 to 40 x D. Made by Guhring
Solid carbide spiral-flute deep hole drills NEW Now from 15 to 40 x D Made by Guhring ex-stock range Available ex-stock now: The spiralflute deep hole drill. The program includes standard drills for drilling
More informationThe Point of Sale Cutting Tool Solution for Professionals
The Point of Sale Cutting Tool Solution for Professionals Professional Grade Cutting Tool for Professional Trades Champion s ipac system provides you with professional grade cutting tools in individual
More informationQuick Ship Products. Our Best Selling Tools In Stock for You! World Class Manufacturer of Rotary Cutting Tools
Quick Ship Products Our Best Selling Tools In Stock for You! World Class Manufacturer of Rotary Cutting Tools Manufactured in the U.S. A. D istributed Around the Glo b e Quick Ship Table of Contents Coatings
More informationHertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
More informationADVANCE TYPES OF DRILL BIT - A REVIEW
ADVANCE TYPES OF DRILL BIT - A REVIEW Chandresh P. Rana 1,Pankaj D Pandey2,Akshar Y Parmar 3,Pradipsinh A Parmar 4 1 Asst. Professor, Mechanical Engineering Department, Vadodara Institute of Engineering,
More informationAdaptors & Extensions
Quickbits 44 Adaptors & Extensions 44 Offline Driver 45 Drill Adaptor 45 Mini Chuck 46 Fixed Shank Drills 47 Changeable Drills 48 Drill Countersinks 49 TCT Drill Countersinks 50 TCT Counterbore 51 Plug
More informationPrice List Innovative Cutting Tool Solutions
Price List 2015 2015 1897 Innovative Cutting Tool Solutions NEW PRODUCTS! SMC Sheet Metal Cutters Page 28 CT150STK/CT200STK Stack Cut Annular Cutters Page 35 Your Productivity Partner Champion has been
More informationHigh Precision Violet Series Drills for Counter Boring VA-PDS-CB Exclusive design for counter boring.
212.12 Update B159B New sizes included High Precision Violet Series Drills for Counter Boring Exclusive design for counter boring. y Innovative cutting edge geometry for high performance counter boring.
More informationPrecision Cutting Tools RE-GRINDING AND RE-COATING SERVICE
Precision Cutting Tools RE-GRINDING AND RE-COATING SERVICE Price List 2017 Maximum economic efficiency thanks to refurbishing to original quality Even the most resilient tool will wear at some time when
More informationEnd Mills 4. Cutting Tools 1 (Cont d) End-mills (Cont d)
Outline Review of Milling Cutting Tools Milling Milling Operations Workpiece Materials Tool Selection Machining Tips Toolholders Fixtures Cutting Tools HSS tools Coated (TiN, Al O 3, TiAlN,...) versions
More informationFeatures. Special forms are possible
Center Drill >> The is a trademark of Nine9, the developer of the first indexable center drill in the world.(patented) Offering an indexable insert system for the 1st time, Nine9 s design improves your
More informationCutting Tools & Abrasives
Cutting Tools & Abrasives Page Abrasives... 3861 Holesaws... 3858 Countersinks & Deburring Tools... 3856 Jigsaw Blades... 38 Cutting Discs... 3860 Polishing Kits... 3860 Deburring... 3862 Reamers... 3855
More informationReamer Basics. Fixed Reamers The reamer size is fixed and any size reduction due to wear or sharpening cannot be reclaimed
1 Reamer Basics Reamers are available in a variety of types, materials, flute styles and sizes The typical reamer is a rotary cutting tools designed to machine a previously formed hole to an exact diameter
More informationWARNING. Whatever your need, Allied Machine & Engineering Corp. delivers high performance tooling on the cutting edge.
Our focus on product excellence, service to the customer, respect for the individual and competitive advantage enables us to deliver outstanding results in a diverse range of manufacturing, production
More informationThe importance of precision cutting requires special accessories
Microstops and Drilling Accessories The importance of precision cutting requires special accessories to aide in drilling accuracy, providing tighter tolerances while protecting surface areas from skin-damage.
More informationHSS Specialists. Special design high speed steel drills for special machining tasks
HSS Specialists Special design high speed steel drills for special machining tasks Guhring s HSS Guhring has been a specialist in drilling tools for more than a century. This not only applies to the broad
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More informationSPECIALISED TOOLING MANUFACTURER. Est Quality ISO Proudly Australian Owned & Operated v2
SPECIALISE TOOLING MANUFACTUE Est 1991 Quality ISO 9001 Proudly Australian Owned & Operated 2018 v2 Terms and Conditions How to Order We offer several different and convenient methods to order our products
More informationHSS ENDMILLS Endmills Cost effective machining
Endmills Cost effective machining - olutions for slotting, finishing, roughing & profiling - 8% Co & grades of - Various shank styles to suit your needs - hort & Long eries - General purpose & application
More informationReaming. MAPAL MonoReam. Systematic versatility NEW
Reaming MAPAL MonoReam Systematic versatility NEW MAPAL MonoReam With the newly developed multi-bladed reamers in the 600, 700 and 800 series, MAPAL is offering a new, simple, highperformance, standardised
More information37567 HWY 109, WINNEBAGO, MN HI-PERFORMANCE SPLIT-TIP (SELF-PILOTING) MONEY BACK GUARANTEE
Winters DRILL BIT CITY 37567 HWY 109, WINNEBAGO, MN 56098 ORDER DESK 1-800-950-3938 INFO EMAIL: max@wintersdrillbitcity.com WEBSITE: www.wintersdrillbitcity.com FARMERS AND MECHANICS CHOICE WE SOLVE DRILLING
More informationInnovative Cutting Tool Solutions 2008 Product Catalog
Innovative Cutting Tool Solutions 2008 Product Catalog Introduction Your Productivity Partner Professional Grade Products and Service Champion has been dedicated to serving professionals with industrial
More information2L inc. Superior Quality Engraving & Workholding Products. Manufactured In House. 2L inc. 4 Kane Industrial Drive Hudson, MA 01749
Superior Quality Engraving & Workholding Products Manufactured In House Spring Loaded Engraving Tools End Mills & Engraving Tools Solid Carbide - Produced In House Venturi Vacuums PTFE & Aluminum CNC Countersink
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationHIGH QUALITY PRODUCTS AND ON TIME DELIVERY FOR WORLD-WIDE CUSTOMERS
PRODUCT LINES DRILLING S DREAM DRILL HIGH FEED DREAM DRILL GENERAL GOLD-P DRILL i-one DRILL MULTI-1 DRILL Cutting tools for making holes in molds & die, machine tool, automobile and electronic industries.
More informationDrills - Metal - Wood - Masonry - Glass & Tile DRILLS
Drills - Metal - Wood - Masonry - Glass & Tile DRILLS Wood Metal Masonry Glass & Tile 10 Catalogue Code Page Hard wood & soft wood Wood & nails Plywood Chipboard MDF Laminated particle board Steel Hard
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More information2018 PRICE LIST SOLID CARBIDE THREAD MILLS
2018 PRICE LIST SOLID CARBIDE THREAD MILLS NORTH AMERICAN TOOL HISTORY & OVERVIEW North American Tool was founded in 1986, by the father and son team of Kenyon Y. Taylor and Roger K. Taylor. Working in
More informationProtective titanium nitrite coating. Double-fluted design. No. of Hole Sizes 1/8 to 1/2 13. Drill Diameter Sizes (In.) 1/4 to 7/8 11 1/16
Step Drill Bits 35-511 35-512 35-513 35-514 Trust IDEAL step drill bits for precise, repetitive drilling through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more.
More informationHSS ENDMILLS Endmills Cost effective machining
Endmills Cost effective machining - olutions for slotting, finishing, roughing & profiling - Various shank styles to suit your needs - hort & Long eries - General purpose & application specific geometries
More informationMAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches
ISO 9001 : 2008 Certified MAXWELL TOOLS CO. Mfrs of Milling Cutters; Gear Cutters; Gear Hobs; Gear Shapers; Broaches # 3, Industrial Estate, RAJPURA - 140 401 Tel. +91 1762-224427, Fax : +91-1762-223372
More informationAdvanced Drilling Equipment Cutting Tools
Advanced Drilling Equipment Cutting Tools January 2015 2014 APEX TOOL GROUP 1 Product Overview Precision Good surface finish Fit to application special cutter with tight hole tolerance Advanced Drilling
More informationCat.3a Super Power Drill Super Drill
www.jic-tools.com.tw Cat.3a Super Power Drill Super Drill WE HAVE INVESTED RESOURCES IN THE DESIGN & MANUFACTURE OF INSERTED CUTTERS Cost Saving Our innovative tooling design upgrades productivity and
More informationto Hand-Held Drilling When you need a high performance drill for your most demanding applications,
to Hand-Held Drilling When you need a high performance drill for your most demanding applications, Foster & Company has the solution. Our high performance PowerBit drills, unique design and black and bronze
More information