Mounting Systems & Hydro-Grip

Transcription

1 Mounting Systems & ydro-rip

2 Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering one ollets... 6 Stiffening ollars... 7 Locking ollars... 7 ydro-rip System ydro-rip Type & ydro-rip Type & ydro-rip Type & ydro-rip Type R...14 ydro-rip Types, S,...15 Safety isks ydro-rip Types W2 & rease uns, Spare Parts & Spacers...17 ndex Specify these items when ordering: R or L Nut Specify right hand or left hand nut (remember, tool rotation is always opposite of nut rotation when it is being tightened) apacity Minimum head capacity of an open end sleeve is 1-1/2 Maximum head capacity of an open end sleeve is 12 Sleeves (specify these items) nside diameter Outside diameter apacity Rotation Sleeve Taper ngle 30 degree taper on cones is standard Stiffening ollars 1/8 is standard thickness Optional tems for Mounting Systems one for O.. Sleeve eyways (Standard) Mounting oles (qty. 1-6) Mounting oles (qty. 7-12) Nut or Open nd Sleeve Nut or losed nd Sleeve Safety ollars/ydro Spacers To ill Out arrell Undercut O.. Sleeve Wrench or Sleeve ydro ore > 5 inches wide or less ydro ore > over 5 inches wide dd rease itting & Release to O.. North merica s largest carbide & diamond cutting tool manufacturer. 247

3 Open nd Standard Sleeve Specifications pplications or mounting a variety of tools on horizontal or vertical non-threaded shafts that is not threaded Sleeve centers itself and the tool as the nut is tightened when using a collapsible collet system dvantages The open end standard sleeve can be mounted anywhere on the shaft esigned to accurately center tooling on the shaft asily moved to different locations on the shaft esigned with a standard bore diameter of 1-13/16" or a 2-1/8" omes with a standard key of 3/8 on the sleeve Standard 30 degree taper on cones ody thickness of your tool determines capacity When ordering specify: either right hand or left hand rotation, body thickness of tool, and bore diameter NOT: The open end standard sleeve is available in any length to customer specifications. vailable in 3", 4", 5", 6",and 8" capacities. 248 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

4 Self entering & Set Screw ead Sleeves Self entering Saw & ead Sleeve pplications or mounting either cutter heads or saw blades onto a smooth shaft dvantages esigned to accurately center tooling on the shaft The complete unit can be mounted anywhere on the shaft to mount a wide variety of tools The open end standard sleeve design centers the whole unit accurately onto the shaft Standard barrel design with open end sleeve bore diameter of 1-13/16" or a 2-1/8" 1/8" enter Spacer is included with the sleeve The use of spacers to take up the remaining sleeve space allows the interchanging of saws and cutters Specify either right or left hand rotation when ordering NOT: The open end standard sleeve is available in any length to customer specifications (See page 4). vailable in 3", 4", 5", 6",and 8" capacities. Set Screw Saw & ead Sleeve pplications or mounting either cutter heads or saw blades onto a smooth shaft an mount cutters as well as saw blades with the addition of spacers dvantages Sleeve can be easily moved anywhere on the shaft The sleeve and tool, can be removed as one unit Two brass tipped set screws protect the shaft Screws set 90 degrees apart firmly mount the system onto the shaft The retaining ring screws onto the sleeve to lock the tools into place Specify either right or left hand rotation when ordering NOT: vailable in 1", 2", 3", 4", 5", 6",and 8" capacities. North merica s largest carbide & diamond cutting tool manufacturer. 249

5 Spacers and one ollets Specifications Steel & luminum Spacers pplications Used to space tooling on the shaft dvantages ustom built to exact customer specifications for proper spacing an be ordered in aluminum for weight reduction, steel spacers are standard vailable thickness range: 25" 600" vailable Outside iameter: 600" and under Parallelism Tolerance +/ Width Tolerance +/- 002 Specify diameter, bore, thickness, and keyway when ordering OUTS MTR TNSS NS MTR Self entering one ollets pplications one collets center tools more accurately than a straight bore or mounting a variety of tools onto horizontal or vertical threaded shafts practical solution for mounting small shaper cutters on the shaft dvantages an be used to mount a variety of heads with different bore diameters elps minimize runout in all machine operations Standard 30 degree taper on cones 1, 1-1/8, 1-1/4 bores are standard Specify your specific bore when ordering omes in a set of SLOT TRU ROSS STON ON TL 250 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

6 NP T Stiffening R-and ollars Pg - ead & Locking 24/24 alibri ollarsregular Made from 1/8 thick, hardened and ground plate ollow ground for maximum stiffening power Use largest diameter stiffening collar for the application pplications or added straightness and stability to saw blades dvantages ives saw blades more support, resulting in straighter cuts and longer tool life elps produce better quality cuts in the material Stiffening ollars Part No. iameter ore Size S " 5/8" S " 1" S " 1" S " 1" S " 1" NOT: ore sizes listed are standard and can not be changed due to the hardness of the steel. dditional sizes available upon request. Round Style Locking ollars or an mproved alance Set-Up North merica s largest carbide & diamond cutting tool manufacturer. 251

7 YRO-RP Type and pplications xtremely accurate mounting system for use on non-threaded arbors dvantages ncrease feed rates by 30-50% ives near perfect concentricity on the O xcellent repeatability of the cutting circle ensures that all of the knives/wings cut effectively Reduces set up time because the cutting tool and sleeve remain as one unit No assembly required Smoother finishes for limited sanding Type and is pressed into the cutting tool and retained by screws Type sleeve is operated with a high pressure pump When pressurized: nner sleeve expands towards the spindle Type sleeve is operated with a T-wrench OLT RL OR 2 PN OLS 7 15mm/ PRT OLT RL OR 3 MOUNTN OLS 120 L mm/ ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

8 YRO-RP Type and Type with inch bores M /4"/40-55*** 35mm M /16"/ mm M /16"/ mm M /8"/ mm Type with inch bores M /4"/40-55*** 35mm M /2"/ mm M /16"/ mm M /8"/ mm Type with metric bores M100-40/ mm M101-45/60-55* 35mm M105-45/60-75* 55mm M102-50/60-55** 35mm M106-50/60-75** 55mm M108-60/ mm Special Size -60/ mm Type with metric bores M120-40/ mm M121-40/ mm M123-50/60-55** 35mm M126-50/60-75** 55mm M128-50/65-75** 35mm Special Sizes are non-standard sleeves *) The 45 sleeve has two carrier pegs, 8.5 x 5 mm. **) The 50 has two, threaded M5-holes for carrier pegs, on a 70 mm bolt circle diameter. ***) The -1-1/4"/40 has two tool fastening holes. North merica s largest carbide & diamond cutting tool manufacturer. 253

9 YRO-RP Type and Type and is threaded and has a knurled ring nut for interchangeability between various cutting tools Type sleeve is operated with a high pressure pump When pressurized: inner sleeve expands towards the spindle and the outer sleeve expands towards the tool Type sleeve is operated with a T-wrench pplications xtremely accurate mounting system for use on non-threaded arbors Use on moulder, tenon machines, etc dvantages ncrease feed rates by 30-50% ives near perfect concentricity on the O xcellent repeatability of the cutting circle ensures that all of the knives/wings cut effectively Reduces set up time because the cutting tool and sleeve remain as one unit No assembly required Smoother finishes for limited sanding OLT RL OR 2 PN OLS 7 15mm/ PRT OLT RL OR 3 MOUNTN OLS 120 L mm/ ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

10 YRO-RP Type and Type with inch bores Special Size -1 1/4"/40-85*** 50mm M /2"/ mm M /2"/ mm M /2"/ mm M /16"/ mm M /16"/ mm M /16"/ mm M /16"/ mm M /16"/ mm M /16"/ mm M /8"/ mm M /8"/ mm M /8"/ mm Type with metric bores M202-40/ mm M203-40/ mm M206-40/ mm M207-40/ mm M208-40/ mm Special Size -40/ mm M210-40/ mm M211-40/ mm M213-45/60-75* 40mm M214-45/60-95* 60mm M215-45/60-115* 80mm M216-45/60-140* 105mm M217-45/60-190* 155mm Special Size -45/60-240* 205mm M220-50/60-75** 40mm M221-50/60-95** 60mm M222-50/60-115** 80mm M223-50/60-140** 105mm M224-50/60-190** 155mm Special Size -50/60-230** 195mm M226-50/60-240** 205mm M228-60/ mm M229-60/ mm Type with inch bores M /2"/ mm M /2"/ mm M /16"/ mm M /16"/ mm M /16"/ mm M /16"/ mm Special Size -1 13/16"/ mm M /8"/ mm Special Size -2 1/8"/ mm Type with metric bores M270-40/ mm M272-40/ mm M273-40/ mm M274-40/ mm Special Size -40/ mm Special Size -45/60-75* 40mm Special Size -45/60-115* 80mm M282-50/60-75** 40mm M283-50/60-95** 60mm M284-50/60-115** 80mm Special Size -50/60-140** 100mm Special Sizes are non-standard sleeves *) The 45 sleeve has two carrier pegs, 8.5 x 5 mm. **) The 50 has two, threaded M5-holes for carrier pegs, on a 70 mm bolt circle diameter. ***) The -1-1/4"/40 has two tool fastening holes. North merica s largest carbide & diamond cutting tool manufacturer. 255

11 YRO-RP Type and pplications xtremely accurate mounting system for use on non-threaded arbors dvantages ncrease feed rates by 30-50% ives near perfect concentricity on the O xcellent repeatability of the cutting circle ensures that all of the knives/wings cut effectively Reduces set up time because the cutting tool and sleeve remain as one unit No assembly required Smoother finishes for limited sanding Type & sleeves are interchangeable between various cutting tools and retained by screws Type sleeve is operated with a high pressure pump When pressurized: inner sleeve expands towards the spindle and the outer sleeve expands towards the tool Type sleeve is operated with a T-wrench 256 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

12 YRO-RP Type and Type with inch bores M /2"/ mm Special Size -1 1/2"/ mm M /16"/ mm M /16"/ mm M /16"/ mm Special Size -1 13/16"/ mm Special Size -2 1/8"/ mm Special Size -2 1/8"/ mm Type with inch bores Special Size -1 1/2"/ mm Special Size -1 13/16"/ mm Special Size -2 1/8"/ mm Type with metric bores Special Size -40/ mm M304-40/ mm M305-40/ mm M306-40/ mm Special Size -40/ mm M308-40/ mm Special Size -40/ mm M311-45/60-75* 55mm Special Size -45/60-95* 75mm Special Size -45/60-115* 95mm Special Size -45/60-140* 120mm M318-50/60-75** 55mm M319-50/60-95** 75mm M320-50/60-115** 95mm M321-50/60-140** 120mm M322-50/60-190** 170mm M323-50/60-230** 210mm M326-60/ mm Type with metric bores M340-40/ mm M342-40/ mm M343-40/ mm M344-40/ mm M345-40/ mm Special Size -45/60-95* 75mm Special Size -45/60-140* 115mm M352-50/60-75** 55mm M353-50/60-95** 75mm M354-50/60-115** 95mm M355-50/60-140** 115mm Special Sizes are non-standard sleeves *) The 45 sleeve has two carrier pegs, 8.5 x 5 mm. **) The 50 has two, threaded M5-holes for carrier pegs, on a 70 mm bolt circle diameter. ***) The -1-1/4"/40 has two tool fastening holes. North merica s largest carbide & diamond cutting tool manufacturer. 257

13 YRO-RP Type R Stainless Steel Type R with inch bores M381 R-1 13/16"/ mm Type R with metric bores Special Size R-40/ mm Special Size R-40/ mm Special Size R-40/ mm Special Size R-40/ mm Special Size R-40/ mm Special Size R-50/60-55** 35mm M377 R-50/60-75** 55mm Special Size R-50/60-95** 75mm Special Size R-50/60-115** 95mm pplications xtremely accurate mounting system for use on non-threaded arbors dvantages Manufactured from stainless steel, capable of ultrasonic cleaning as one unit with the tooling ncrease feed rates by 30-50% ives near perfect concentricity on the O xcellent repeatability of the cutting circle ensures that all of the knives/wings cut effectively Reduces set up time because the cutting tool and sleeve remain as one unit No assembly required Smoother finishes for limited sanding Type R sleeves are interchangeable between various cutting tools and retained by screws When pressurized: inner sleeve expands towards the spindle and the outer sleeve expands towards the tool 258 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

14 YRO-RP Types, S, and Safety isks ydro-rip Types and S M410 & M413 sleeves for interchangeable tool assembly and machines with hexagonal spindle profile M410's insert is located in the collar of the sleeve M413's insert can be used in either end of the sleeve M418 features and internal hexagonal profile in its open side Order Safety isk separately M410 M413 ydro-rip with metric bores M410-40/ mm M413-40/ mm M415-40/ mm M416-35/ mm M418 M416 & M415 M418 S-40/ mm ydro-rip Type Sleeve for permanent tool assembly & spindles with keys ydro-rip "" with metric bores M402-35/ mm M403-35/ mm M404-40/ mm Special Size -40/ mm Safety isks Part No. M420 M421 escription Safety isk for types M410 & M413 Safety isk for S Type M418 North merica s largest carbide & diamond cutting tool manufacturer. 259

15 YRO-RP Types W2 and 2 The new W2 expands uniformly by pressurizing the system with an allen T-wrench, a grease gun is NOT required The mechanism is protected from dust behind a sealed plug making the tool assembly quick and easy Type W2 with metric bores M650 W2-30x55 55mm M651 W2-30x mm M640 W2-40x55 55mm M641 W2-40x mm M652 W2-40x mm M642 W2-40x mm M653 W2-50x55 55mm M654 W2-50x mm M655 W2-50x mm M644 Mounting andle Quick and precise tool assembly igh performance and balance Redesigned safety ring in light metal Multiple tool attachment dapted for three wing tools Type "2" with inch bores M "x40/S 63 40mm M "x55/S 63 55mm M "x80/S 63 80mm M /4"x40/S 63 40mm M /4"x55/S 63 55mm Type "2" with metric bores M x40/S 63 40mm M x55/S 63 55mm M x40/S 63 40mm M x55/S 63 55mm M x80/S 63 80mm M x100/S mm 260 ontact us for a fast quote. sales@napgladu.com US eadquarters (800) anada, Montreal (800) anada, Toronto (888)

16 rease uns, Spare Parts and Spacers Part No. NP552 NP553 NP554 NP555 NP747 NP748 escription rease un igh Pressure ose ydraulic onnector rease artridge Spare Part it Pressure Release Repair it * Spare Part it ncludes: ydraulic onnector, Washer, Steel ball 3/16 diameter, arrel Seal, X-ring and Pressure Release Repair it. **Pressure Release Repair it includes: Pressure Release Screw, Steel ball 4mm diameter, Valve Seat and O-ring. pplications To be used for all types of hydraulic mounting systems including the,, & W type elivers accurate pressure and readings for safe tool operation Reads from bars of pressure Uses standard size grease cartridges lycerine dial guage Use the correct grease type for best performance O NOT use soap based grease, to avoid damaging the sleeve Recommended rease Type lase: lasolube 301 S: lfalub LMT2 xxon: Unirex N2 Mobil: Mobilux 1, 2 ulf: ulfex MP Texaco: Molytex P2 ina: Marson PL2 P: L21M sso: MP rease/eacon P2 Shell: Retinax Types,, & ydro-rip rease Nipples Part No. NP751 NP749 NP750 escription it with 1 iller, 1 Release Nipple, 2 Washers iller nipple with washer Release nipple with washer ydro-rip Spacers Part No. Spacer--60*/90-5 Spacer--60*/90-10 Spacer--60*/90-20 Spacer--60*/90-3 Spacer--60*/90-5 Spacer--60*/90-10 with 3 holes and 3 cut-in portions * = Usable also for 1 = 59.96mm instead of 60mm. escription TP-ydro-rip Spacer TP-ydro-rip Spacer TP-ydro-rip Spacer TP-ydro-rip Spacer TP-ydro-rip Spacer TP-ydro-rip Spacer ydro-rip Spacer Set Part No. Spacer set S-60/90 escription Thickness = 0.1, 0.2, 0.3, 0.5, pcs. with 3 holes North merica s largest carbide & diamond cutting tool manufacturer. 261