Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2

Size: px
Start display at page:

Download "Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2"

Transcription

1 TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco Page Q 3/2 Page Q 4 Tools Pipe cutter, Chamfering tool, Saddle blade, Locking plier Page Q 4/1 Extractors, Hydrant-Master Universal Key, Operating key Page Q 4/2 Valve key 1", Assembly key Page Q 4/3 Q 1/1 Edition

2 TOOLS Application examples Q 1/2 Edition

3 Drilling machine For drilling under pressure Can be used for drilling pipes of steel, ductile iron, AC, PE and PVC When drilling under pressure, swarf is washed out via an outlet Rotated by ratchet handle and fed by feed wing nut The ratchet is connected to the drill shaft with a simple locking device Pipe saddle adapters and reducers are sealed with captivated rubber rings Drilling machine No Order No. Description Content case Dimensions Drilling machine 5810 Case 5830 Ratchet 5840 Shaft 5850 Twist drill for steel, ductile iron and AC pipes 5860 Cup drill for PE and PVC-pipes 5890 Reducing adapter with rubber seals 5900 Equal adapter with rubber seals pc. Allen key size pc. C spanner for adapter 8401 Saddle blade for shut-off 5800 Complete in case (weight 17,5) 2" - 1" 2" - 1¼" 2" - 1½" 2" - 2" SW 5 1" - 1¼" 1½" - 2" Suitable accessories 8 10 Cup drill for steel and ductil iron pipes: No Reducing adapter with rubber seals (2" - 2½"): No Adapter for ISO-combination tapping valve (2" - 1½"): No Adapter for thread-cutting machine REMS AMIGO 2: No No Cup drill For PE- and PVC-pipes No Twist drill For steel, ductile iron and AC-pipes 1 Ratchet 2 Shaft locking bolt 3 Feed wing nut 4 Red marking 5 Drill shaft 6 Body 7 O-ring 8 Rubber seal 9 Ball valve outlet (carrier) 10 Adapter or reducer 11 Hexagonal socket 12 Twist drill Q 2/1 Edition

4 Motorised Drilling machine Powered drilling machine with continuous feed 3 drive options Hand ratchet, petrol engine, pneumatic drive Also for under pressure drilling Massively increases the service life of the drilling tools For quick and simple drilling of ductile iron-, steel-, AC-, PE and PVC-pipes Motorised power and continuous feed are necessary for driving the special carbide drills which are needed for cement lined cast iron pipes Suitable accessories Content case Order No. Description 5825 Drilling machine 5815 Case 5830 Ratchet 5840 Shaft 5845 Short shaft for motorised drive 5850 Twist drill for steel, ductile iron and AC pipes 5860 Cup drill for PE and PVC-pipes 5890 Reducing adapter with rubber seals 5900 Equal adapter with rubber seals pcs. C spanner for adapter 8401 Saddle blade for shut-off 5805 Complete in case (weight 22,5) Dimension 2" - 1" 2" - 1¼" 2" - 1½" 2" - 2" 1" - 1¼" 1½" - 2" Cup drill for steel and ductile iron pipes: No Reducing adapter with rubber seals (2" - 2½"): No Adapter for ISO combination tapping valve (2" - 1½"): No Special version for cement lined cast iron pipes and AC pipes: No. 5805W Carbide drill: No. 5855W Adapter for thread-cutting machine REMS AMIGO 2: No Drilling machine with hand ratchet Standard version (in metal case) No Petrol engine including adapter for drilling machine No No Pneumatic (air consumption: 540 l/min) including adapter for drilling machine No No No No No No Cup drilling For PE- and PVC-pipes No Twist drill For steel, ductile iron and AC-pipes 1 Cup drill or twist drill 2 Hexagonal socket 3 Adapter or reducer 4 Knurled nut 5 Gear transmission 6 Shaft 7 Shaft locking bolt 8 Ball valve (washout) 9 Carrier 10 O-ring 11 Red marking 12 Body Q 2/2 Edition

5 Drilling machine Changeable carbide drill (WHM) Dimensiones: Cup drill for steel and ductile iron pipes No Continuous feed and motorised power are necessary! Easy and cost saving replacement of worm cutting tips without any technical efforts One cutting tip holder for each two dimensions of cutting tips Available as set for one dimension each and in single components for an individual demand WHM-drill for cast iron, cement lined cast iron and AC pipes No. 5855W Order No. Description Dimensions 5855W NN WHM-drill complete WHM-cutting tip holder including set bolt WHM-cutting tip Borehole sealing sleeve Torx-set bolt for WHM-cutting tip holder TORX-pin key 1" - 1¼" 1½" - 2" 2" - Ø 36 GWS 25 1" - 1¼" GWS 32 1½" - 2" WHM-cutting tip holder No WHM-cutting tip No Set bolt No. NN52 TORX-pin key No Q 3/1 Edition

6 Drilling machine Tonisco The Tonisco drilling machine is suitable for drilling up to Ø 89 pipelines made of steel, ductile iron, AC, PE and PVC Manual feed by means of a feed nut with a handwheel TONISCO-drilling machine No Content case Order No. Description Dimensions Drilling machine Case Electrical drive* Ratchet 220 V 50 Hz 1000 vatios Shaft + extensions Adapter for hole sawing 1¼" - Ø 30 1½" - Ø 38 Hole saw " - Ø 44 DN 80 - Ø 70 DN Ø 89 Centre drill Ø 7 1" Drill adapter with external thread 1¼" 1½" 2" Drill adapter with flange DN 80 DN 100 * Attention: 230 V - please observe safety regulations. TONISCO-drilling machine No can also be leased. Thread adapter Flange adapter Hole saw Centre drill Q 3/2 Edition

7 TOOLS Cut pipes square and straight The lever design minimises the force required Pipe cutter Cuts PE- and PVC pipes No Order No. For Ø Pipe Weight 6050 Model I: up to 1¼" or Ø 40 Model II: up to 2" or Ø 63 0,30 1,10 Symbol photo For easy assembly of ISO push-fit fittings the pipe should be beveled. We recommend our precision-made steel chamfering tool. This provides the correct chamfer when turned clockwise a few times on the pipe end Chamfering tool For beveling PE pipes No Order No. Ø Pipe DN Weight ½" 0,07 25 ¾" 0, " 0, ¼" 0, ½" 0, " 0,62 For shut-off saddles and shut-off adapters For under pressure drilling Saddle blade No Order No. Size Weight 8401 Model I: For saddle 1" - 1¼" Model II: For saddle 1½" - 2" 0,20 0,25 To hold and push the open POM clamp for the assembly of fittings with cone that can be dismantled (No. 6301) Made of stainless steel Locking plier No Q 4/1 Edition

8 TOOLS First ensure that the grip ring is not under tension. When pushed in, the extractors separate the grip ring from the pipe, which can then be pulled out Application: for all Hawle products with ISO push-fit fittings Extractors For dismantling ISO push-fit fittings No Order No. Ø Pipe DN Qty. Extractors Weight ½" 2 0,04 25 ¾" 2 0, " 2 0, ¼" 2 0, ½" 2 0, " 2 0, , , ,41 ISO Made of aluminium and ductile iron with reversible ratchet For opening and closing For operating coupling caps A + B + C For operating hose couplings B + C For breaking theft indicator caps Hydrant-Master Universal Key Lightweight - robust - practical No Order No. Weight ,50 Order No. Operating key for Length Weight 3410 Service valves 850 1, Valves, extension spindles and below ground hydrants , Above ground hydrants 420 1,25 Operating key No No No No. 3410/3420 No Q 4/2 Edition

9 TOOLS Installation tool to change air valve 1" No Valve key For air valve 1" No For assembling service valves No. 2491, No. 2500, No. 2520, No Of stainless steel No damage to epoxy powder coating No stress on the bonnet Operated via size 36 hexagonal nut with regular spanner or using the ratchet of the HAWLE drilling machine Assembly key for service valves with internal thread No Order No. For internal thread Weight ¼" / 2" 0,50 1" / 1½" 0,65 Q 4/3 Edition

10 NOTES Q 4/4 Edition

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34. MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines

More information

Holesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm

Holesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw

More information

Especially suitable for work in restricted working spaces.

Especially suitable for work in restricted working spaces. Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.

More information

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.

The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure. MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand

More information

MODEL D DIESEL PILE HAMMER

MODEL D DIESEL PILE HAMMER AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710

More information

Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine

Model No: SM2503. Parts Information: Mini Lathe & Drilling Machine Page 1 of 5 Page 2 of 5 1 SM2503.001 CHANGE GEAR COVER 2 SM2503.002 CAP SCREW M4x8 3 SM2503.003 CAP SCREW M4x12 4 SM2503.004 HINGE L*B=38*31 5 SM2503.005 WASHER 4 6 SN4.S STEEL NUT M4 ZINC DIN934 (SINGLE)

More information

2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54

More information

Diesel Pile Hammer D30-32 Part # 66508

Diesel Pile Hammer D30-32 Part # 66508 Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner

More information

SAWS, PIPE CUTTERS. Design. Blade

SAWS, PIPE CUTTERS. Design. Blade SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

T : F : Revised June 2013

T : F : Revised June 2013 Revised June 2013 W R A, O USA T: 800 321 7950 440 998 2788 F: 440 992 2925... 2 INSTRUCTIONS FOR 3/4, 1, 1-1/4 DIAMETER TAPS FIGURE 1 A B C D E F G HOT TAP SPINDLE HOT TAP SLEEVE HOT TAP FEED SCREW ADAPTER

More information

NEWS Part. N /0 MINITEC NEWS

NEWS Part. N /0 MINITEC NEWS NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

B-Too Drilling and Tapping Machine Instruction and Maintenance Manual

B-Too Drilling and Tapping Machine Instruction and Maintenance Manual B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our

More information

3.1 MUELLER LARGE DRILLING MACHINES

3.1 MUELLER LARGE DRILLING MACHINES MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available

More information

3.1 MUELLER LARGE DRILLING MACHINES

3.1 MUELLER LARGE DRILLING MACHINES MUELLER LARGE DRILLING MACHINES 3.1 Shaded area indicates change Rev. 1-09 Large Drilling Machines are used for making 2" to 24" lateral connections on water mains under pressure. These machines are available

More information

Diesel Hammer Model D19-42 Part #

Diesel Hammer Model D19-42 Part # Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2

More information

Wheeler Rex Ashtabula, Ohio Tel: Fax:

Wheeler Rex Ashtabula, Ohio Tel: Fax: Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395

More information

MUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5

MUELLER E-5TM. and D-5TM. Drilling Machines. Reliable Connections. E-5 General Information 2. D-5 General Information 3. Operating Instructions 4-5 operation Instructions manual MUELLER E-5TM and D-5TM TAble of contents PAGE E-5 General Information 2 Drilling Machines D-5 General Information 3 Operating Instructions 4-5 E-5 Parts 6 D-5 Parts 7! WARNING:

More information

PURESTREAM SYSTEM - ASSEMBLY GUIDE

PURESTREAM SYSTEM - ASSEMBLY GUIDE PURESTREAM SYSTEM - ASSEMBLY GUIDE VISIT OUR WEBSITE : www.cagpurification.com our installment procedure videos in the PURESTREAM Piping section. NECESSARY TOOLS FOR INSTALLATION We suggest the use of

More information

EEBR312A Brake Lathes Parts Identification

EEBR312A Brake Lathes Parts Identification EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference

More information

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016

More information

MUELLER. CL-12 Drilling. Machine. Reliable Connections. Maintenance 2. General Specifications 3-4. Drilling Equipment 4

MUELLER. CL-12 Drilling. Machine. Reliable Connections. Maintenance 2. General Specifications 3-4. Drilling Equipment 4 operating Instructions manual MUELLER TAble of contents PAGE CL-12 Drilling Maintenance 2 General Specifications 3-4 Drilling Equipment 4 Installation and Operating Instructions 5-9 Travel Charts 10-18

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in

More information

thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes

thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes thoroughly tried and tested! EWE Tapping Valves A single system for all types of pipes www.ewe-armaturen.de EWE Tapping Fittings high-quality products from Germany EWE tapping fittings are the product

More information

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

Precision made in Germany. As per DIN The heart of a system, versatile and expandable. 1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

ELECTRIC TOOL PARTS LIST

ELECTRIC TOOL PARTS LIST Hitachi Power Tools LIST E936 ELECTRIC TOOL PARTS LIST COMPOUND SAW Model 2004 4 20 (E1) 1 2 3 23 24 7 8 9 10 6 5 4 15 11 16 12 13 12 14 18 25 26 27 28 29 30 19 17 1 9 11 16 21 624 20 22 39 40 41 42 35

More information

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI

EXPLODED VIEW. Dake Corporation 724 Robbins Road Grand Haven, MI EXPLODED VIEW *Exploded view is only for 350CE Cold Saw with Frequency Drive Motor* 21 REV032019 350CE Frequency Drive Gearbox: Part Description Part Number Part Description Part Number Oil Seal 86000000

More information

SECTION 9: PARTS. Table & Column Breakdown

SECTION 9: PARTS. Table & Column Breakdown SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE

More information

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes

3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit

More information

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *

1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * * -I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()

More information

Model No: SM2502. Parts Information: Mini Drilling & Milling Machine

Model No: SM2502. Parts Information: Mini Drilling & Milling Machine Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007

More information

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT

PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer

More information

IWB-40 - Industrial Work Bench

IWB-40 - Industrial Work Bench IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load

More information

TRAV-L-CUTTER Pipe Cutter

TRAV-L-CUTTER Pipe Cutter TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs

More information

The new generation with system accessories. Made in Europe!

The new generation with system accessories. Made in Europe! 1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.

More information

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)

How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun

More information

Reed pipe tools and vises

Reed pipe tools and vises Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such

More information

A new dimension of changeability. Unique options for every application. Developed and made in Germany by:

A new dimension of changeability. Unique options for every application. Developed and made in Germany by: A new dimension of changeability Unique options for every application Developed and made in Germany by: The BaerGrip ratchet is in fact very versatile. As the only 1/4"-ratchet in the world it can be used

More information

IWB-12 - Industrial Work Bench

IWB-12 - Industrial Work Bench IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

...thoroughly tried and tested!

...thoroughly tried and tested! ...thoroughly tried and tested! Tapping and bushing with EWE tools www.ewe-armaturen.de Installation and operating instructions for EWE drilling units 1. Details of product 1.1. Application field EWE tapping

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

OPERATIONAL AND MAINTENANCE MANUAL. Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE

OPERATIONAL AND MAINTENANCE MANUAL. Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE MOD 14-02 OPERATIONAL AND MAINTENANCE MANUAL Rev. 0 Data 01/02/2012 Drilling machine ProDrill 20 INSTRUCTION MANUAL FOR USE AND MAINTENANCE TABLE OF CONTENTS TECHNICAL SPECIFICATIONS 2 USE 4 MAINTENANCE

More information

BSC Industrial Storage Cabinet

BSC Industrial Storage Cabinet BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W

More information

General Four-Way Operation, Maintenance & Service Manual

General Four-Way Operation, Maintenance & Service Manual General Four-Way Operation, Maintenance & Service Manual SCOPE Included in the following pages you will find assembly drawings, exploded views, parts lists, assembly tips, operational descriptions and

More information

SECTION 9: PARTS Column Breakdown

SECTION 9: PARTS Column Breakdown SECTION 9: PARTS Column Breakdown 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 26 27 28 29 3 31 31-1 32 33 34 35 36 37 39 38 47 48 46 45 3644 44 43 40 41 42 24 23 22 52 51 50 30 49 57 58 59 60

More information

Model No: TC10. Parts Information: Tyre Changer - Automatic

Model No: TC10. Parts Information: Tyre Changer - Automatic Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

WTC Industrial Mobile Tooling Cabinet Workstation

WTC Industrial Mobile Tooling Cabinet Workstation WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load

More information

Operating Instructions for

Operating Instructions for DEPENDABLE SINCE 1857 Operating Instructions for A-3 DRILLING AND TAPPING MACHINE MAIN OFFICE and PLANT 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com Operating Instructions for

More information

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity

IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

Clamping bolts Eccentrical cams clamping units

Clamping bolts Eccentrical cams clamping units 2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft

More information

Downtown Rack. Custom logo option available

Downtown Rack. Custom logo option available Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

More information

Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm)

Industrial Drill Chucks with Key. For Stationary Machines and Portable Drilling Machines. Diameter (mm) Drilling Industrial Drill Chucks with Key For Stationary Machines and Portable Drilling Machines Specifically designed for stationary drilling, turning, milling and wood working machines The one-piece

More information

Decide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)

Decide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes) Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel

More information

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

OPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT

OPERATION AND MAINTENANCE INSTRUCTIONS AVK UNDERGROUND FIRE HYDRANT 1. INTRODUCTION Operation and maintenance manual for the series underground CLEARWAY fire hydrant 1 of 7 The designs, materials and specifications shown are subject to change without notice due to our

More information

Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces

Pliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight

More information

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026

More information

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000 FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

Simplex Baseboard System Baseboard System

Simplex Baseboard System Baseboard System Simplex Baseboard System Baseboard System I Complete installation programme I Trouble-free and time-saving installation I Various connection kits for all types of pipe Our service to you I Simplex Products

More information

Bevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES

Bevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES 82 Bevelling made easy BDS offers a range of professional machines for easy and perfect processing of milling edges: For the preparation of welding seams with the fully automatic AutoCUT 500 or the manually

More information

Drilling machine for use on branch saddles fused. Instructions for assembly and use

Drilling machine for use on branch saddles fused. Instructions for assembly and use Drilling machine for use on branch saddles fused Instructions for assembly and use DRILLING MACHINE FOR USE ON BRANCH SADDLES FUSED ON POLYETHYLENE PIPELINES FOR PRESSURE AND NON-PRESSURE USE Ø 90 1000

More information

Column & Stand. -4- Model G0759 (Mfd. Since 1/14)

Column & Stand. -4- Model G0759 (Mfd. Since 1/14) Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60

More information

Core drilling technology catalogue

Core drilling technology catalogue Core drilling technology catalogue ruko Core drilling machines PreMiUMlineMline RS125e RS126e RS140e RSH1300 BASiCline RS5e RS10 RS25e RS40e A10 RS125e 2 overview of symbols Magnetic clamping force length

More information

ACCESSORIES CATALOG. SKODA LIVE CENTERS BORING AND FACING HEADS

ACCESSORIES CATALOG.  SKODA LIVE CENTERS BORING AND FACING HEADS ACCESSORIES CATALOG BORING AND FACING HEADS SKODA LIVE CENTERS www.sowatool.com SKODA LIVE CENTERS Skoda Heavy Duty Live Centers - CSN 4334/CSN 4334M Features The rotating spindle is extended right through

More information

Tuf-Lite III Fans 5000K Series Hub

Tuf-Lite III Fans 5000K Series Hub Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced

More information

MUELLER. Drilling and Tapping Machine A-3TM. Reliable Connections. table of contents PAGE. General Information 2. Maintenance Instructions 3

MUELLER. Drilling and Tapping Machine A-3TM. Reliable Connections. table of contents PAGE. General Information 2. Maintenance Instructions 3 operating Instructions manual MUELLER A-3TM Drilling and Tapping Machine table of contents PAGE General Information 2 Maintenance Instructions 3 Installation & Operating Instructions 4-9 Parts Information

More information

MEFA mounting accessories

MEFA mounting accessories MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance

More information

Giraud Tool Company, Inc.

Giraud Tool Company, Inc. Motor Upgrade for Gracey Trimmer This package is intended to allow the user to upgrade their Gracey trimmer with a higher rpm motor and convenience features not found in the production offering. This upgrade

More information

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?

ASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails? ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through

More information

HEADSTOCK (CASTNG & CONTROLS)

HEADSTOCK (CASTNG & CONTROLS) HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR

More information

Parts Catalog Apex 47 Series Model Gasoline & LPG

Parts Catalog Apex 47 Series Model Gasoline & LPG Parts Catalog Table of Contents Side brush R.H. (97085690)... 4 Front wheel drive (97086235)... 8 Travelling mechanism (Part 1) (97077168-1)... 12 Travelling mechanism (Part 2) - Accelerator (97077168-2)...

More information

Ford Drilling Machine

Ford Drilling Machine Section AB 12/2002 Ford Drilling Machine Parts and Instruction Manual The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487

More information

INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS

INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS INSTRUCTIONS FOR USE A1 & A2 KNURLING TOOLS Contents CONTENTS 1. General... 2 1.1 Introduction... 2 1.2 Tool Construction... 3 2. A1-Tools... 5 2.1 Technical Data... 5 2.2 Overview: Main Components...

More information

MODEL RA-200N RADIAL ARM SAW

MODEL RA-200N RADIAL ARM SAW ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL

More information

PF 3000 Face Milling Cutter

PF 3000 Face Milling Cutter Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light

More information

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1

More information

SECTION 9: PARTS Headstock Case and Shift

SECTION 9: PARTS Headstock Case and Shift SECTION 9: PARTS Headstock Case and Shift 3 1 2 10-1 10-2 8 9 10 6 7 19 10-3 15 11 12 25 16 17 18 14 13 12 32 26 29 20 21 33 34 27 35 37 28 43 22 38 39 40 31 45 28 43 23 41 5 28 43 44 30 36-80- Model G0709

More information

Tuf-Lite III Fans 5000K Series Hub

Tuf-Lite III Fans 5000K Series Hub Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced

More information

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS

PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS NON-REVERSING HANDLE ASSEMBLY (SERIAL NO S. STARTING WITH B & D ) PARTS LIST FOR NO. 3 SERIES PISTOL AND T HANDLE DRILLS Form A277D Date 2008July11/C Page 1 of 8 4. 14309 Ring O 5. 14312 Ring O 12. 54156

More information

Mueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI

Mueller Gas Products. Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17800 Curb Stop Tee No Blo Curb Stop Tee Weld x Weld 1440 PSI MUELLER NO-BLO

More information

The AcuDrill drilling machine is universal: it can be used on any threaded saddle or fitting.

The AcuDrill drilling machine is universal: it can be used on any threaded saddle or fitting. ACUDRILL DRILLING MACHINE Universal drilling machine for drilling pipes on threaded branch connections of up to 2". With manual, electric or pneumatic operation FC-41-PMH-07E The AcuDrill drilling machine

More information

Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly

Page 1 Parts List for AL-51G (L160) 07/08/201. Headstock Assembly Page 1 Parts List for AL-51G (L160) 07/08/201 Headstock Assembly 1--------1002-------------------Headstock Casting 13-------1012------------------------------Nut M28 2--------1006---------------------------Flange

More information

Section J DISTRIBUTOR

Section J DISTRIBUTOR Section J DISTRIBUTOR 1J 1. 47-094344-003 Front Pulley Shaft 2. 47-091905-003 Turn Plate (right-hand) 3. 11-051038-001 Hex Hd. Cap Screw (8 mm x 16 mm) 4. N.A. Distributor Frame Complete 5. 47-090547-004

More information

ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia

ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia ANNEXURE-Y80350 FOR FLAT SEAT FULL BORE GLOBE Valve Grinding and Lapping Machine TYPE GHF-Y80350 size 80mm dia to 350mm dia You can do lapping of 2 valves of different size in this range. Operative Range:

More information

CHIP AND DUST EXTRACTION SYSTEMS

CHIP AND DUST EXTRACTION SYSTEMS CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories

More information

Quick-Lock LEM >700 User Manual

Quick-Lock LEM >700 User Manual Quick-Lock LEM >700 User Manual 1st release, version 03/2015 [English] Sold by: Kanaltechnik GmbH Published by: Uhrig Kanaltechnik GmbH Am Roten Kreuz 2 78187 Geisingen, Germany Tel. +49 (0) 7704 / 806-0

More information

TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information

TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...

More information

Parts List for Type 1

Parts List for Type 1 1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118

More information

SECTION 10: PARTS. Headstock

SECTION 10: PARTS. Headstock 33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001

More information

BITS, NUTSETTERS, ADAPTERS

BITS, NUTSETTERS, ADAPTERS BITS, NUTSETTERS, ADAPTERS Square Recess Power Driver Bits... Colour-Coded Square Recess Power Driver Bits... Phillips Power Driver Bits... 6 Colour-Coded Phillips Power Driver Bits... 7 Six Lobe Power

More information

Power Tool Accessories

Power Tool Accessories Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with

More information

Parts List. Knight 600E. Version 1.5/2008

Parts List. Knight 600E. Version 1.5/2008 Parts List Knight 600E Version 1.5/2008 How to order your parts! 1. Check part number on the drawing 2. Use the part number to find the ORDER number on the list 3. Only use ORDER number for your parts

More information

The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms

The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms SRB PRECAST FORMWORK The New Unrivalled SRB Titan Magnet Clamps & Spartan Composite Adjustable Sideforms Australian Designed and Manufactured to suite Robust and Demanding requirements of the Precast Industry.

More information

PARTS LIST MS 2892-D

PARTS LIST MS 2892-D PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK

More information