Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
|
|
- Jason Johns
- 6 years ago
- Views:
Transcription
1 -0 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide choice of connection methods, and the ability to provide the right connection regardless of whether your concern is strength, flexibility, or aesthetics, or a combination of all those advantages. 90 Right ngle onnectors Die-ast Gussets -Series - 0-Series -4 -Series Series - 50-Series -7 0-Series - 0-Series - 90-Series -9 0-Series -9 Die-ast Foundation rackets - & x0 Sheet Metal Gusset -12 Inside-to-Outside Gussets -12 Inside-to-Inside Gussets -1 orner rackets -14 orner ube Kits -15 S, S, & S12 Self-Tapping onnection Screws -1 M12 onnection Screws and nti-rotation T-locks -17 M1 onnection Screw -1 olt onnector Kits -19 & - ross onnector Kit - Quick onnectors/rigid -21 Mitered orner onnectors -22 T-onnector Kits -2
2 /07 luminum Framing Linear Motion and ssembly Technologies -1 Section : Profile onnectors 10 Straight-Line onnectors 45 ngle onnectors End onnector Kits -24 mm & mm onnection Link Kits -25 Multi-ngle onnectors End-to-End olt onnector Kits ngle onnector Kits 0mm, mm & 45mm -2 & -27 Multi-ngle onnector Kits -2 & -29 End-to-End Variable ngle olt onnector -0 End-to-Side Variable ngle olt onnector -1 djustable ngle Gusset Kits -2 Joining Plates orner, T-Junction, Rectangular, and ross Junction Joining Plates - to -
3 -2 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Die-ast Gussets and Foundation rackets Die-cast aluminum gussets are available for connecting a wide range of profile sizes and applications, from x to 0x0, as well as special foundation bracket sizes such as 0x1 and 45x10. Elongated holes allow gussets to be adjusted for position on the profile, while guide tabs assure proper alignment of gusset in the profile s T-slot. Tabs can be easily removed with a flat-tip screwdriver for cross-connection of profiles. ll gussets are designed to accept optional cover caps. T-slot alignment tabs for easy positioning and reduced assembly time lean, professional appearance onnects anywhere on the profile s T-slot Gusset and connecting hardware available as separate components lose tolerances on gusset edges provide flush, tight fit lignment tabs can easily be removed for cross-oriented connections Optional cover caps available Machining required: None Gusset: die-cast aluminum Fasteners: zinc-plated steel over cap: black polyamide lignment tabs on all gussets can easily be removed for cross-oriented connections. Helpful Hint T
4 R /07 luminum Framing Linear Motion and ssembly Technologies - Section : Profile onnectors x Gusset M4 x R mm to mm adapter x gusset only x gusset with fasteners x round cover cap Plastic adapter x Gusset M4 x mm to mm adapter x gusset only x gusset with fasteners x round cover cap Plastic adapter GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
5 -4 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Gussets 0x0 Gusset M x 1 M x R0 0 0 mm to mm adapter 0x0 gusset only x0 gusset with fasteners x0 gusset with fasteners for x0 gusset with fasteners for mm T-slots x0 round cover cap Plastic adapter x0 Gusset M x 14.4 R mm to mm adapter 0x0 gusset only x0 gusset with fasteners x0 round cover cap Plastic adapter GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
6 /07 luminum Framing Linear Motion and ssembly Technologies -5 Section : Profile onnectors x Gusset 14mm T-bolt Kit R x gusset only x gusset with fasteners x round cover cap x0 Gusset mm T-bolt Kit R x0 gusset only x0 gusset with fasteners x0 round cover cap
7 - Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Gussets 45x45 Gusset 19mm T-bolt Kit When connecting two profiles with 0mm side dimensions, order offset blocks to help align gusset with outer edge of profiles. R Offset block 5 45x45 gusset only x45 gusset with fasteners x45 round cover cap Offset block mm T-slot 5mm offset x90 Gusset mm T-bolt Kit 22.5 R x90 gusset only x90 gusset with fasteners x90 round cover cap GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
8 /07 luminum Framing Linear Motion and ssembly Technologies -7 Section : Profile onnectors 50x50 Gusset 19mm T-bolt Kit R x50 gusset only x50 gusset with fasteners x50 round cover cap x0 Gusset 19mm T-bolt Kit R x0 gusset only x0 gusset with fasteners x0 round cover cap
9 - Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Gussets 0x0 Gusset M x 14 14mm T-bolt Kit R Remove mm center tab to use on 0x0 profile with mm T-slot 19mm T-bolt Kit.5.7 R x0 gusset only x0 gusset with fasteners for x0 gusset with fasteners for x0 gusset with fasteners for x0 round cover cap x0 Gusset x0 gusset only x0 gusset with fasteners x0 round cover cap GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
10 /07 luminum Framing Linear Motion and ssembly Technologies -9 Section : Profile onnectors 90x90 Gusset 19mm T-bolt Kit R x90 gusset only x90 gusset with fasteners x90 round cover cap x0 Gusset mm T-bolt Kit R x0 gusset only x0 gusset with fasteners x0 round cover cap GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
11 - Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Die-ast Foundation rackets 0x1 Foundation racket 14mm T-bolt Kit mm T-olt Kit x1 foundation bracket only x1 foundation bracket with fasteners x1 round cover cap x10 Foundation racket x10 foundation bracket only x10 foundation bracket with fasteners x10 round cover cap
12 /07 luminum Framing Linear Motion and ssembly Technologies -11 Section : Profile onnectors Die-ast Foundation rackets 45x10 Foundation racket mm T-olt Kit x10 foundation bracket only x10 foundation bracket with fasteners x10 round cover cap Design Engineering Tip Use our D library to speed design Our D library has 2D and D drawings for most catalog items in.dxf,.dwg,.stp, and.prt format. Find connector drawings by navigating through the list of categories, or search by part number or description. Go to click on Linear Motion and ssembly Technologies, then look for the D Files link.
13 -12 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors Sheet Metal Gusset 42x0 42 Used with 45-series profile to create a right-angle connection Hole in side can be used for attaching panels, tabletops, etc. 0 Zinc-plated sheet steel 0 42x0 sheet metal gusset mm, mm, & mm Inside-to-Outside Gussets 1 DIN 914 M4x-45H set screw 1 lean appearance Easy set screw installation Does not obstruct T-slot Includes set screws DIN 91 Mx-45H set screw Die-cast brass ssembly Note 21 0 Hex wrench access to one set screw DIN 91 Mx12-45H set screw Inside-T-slots remain unobstructed 2 Description Lot Size* Part Number mm inside-to-outside gusset and set screws mm inside-to-outside gusset and set screws mm inside-to-outside gusset and set screws * For smaller quantities, please contact your local distributor.
14 /07 luminum Framing Linear Motion and ssembly Technologies -1 Section : Profile onnectors mm, mm, & mm Inside-to-Inside Gussets 22 DIN 91 M5x5-45H set screw 22 lean appearance Easy set screw installation Includes set screws DIN 91 M5x5-45H set screw Die-cast brass ssembly Note DIN 91 Mx-45H set screw Hex wrench access to both set screws Profiles can be adjusted after structure is assembled D DIN 91 Mx-45H set screw DIN 91 Mx12-45H set screw E DIN 91 Mx12-45H set screw Description Lot Size* Part Number mm inside-to-inside gusset and set screws mm to mm inside-to-inside gusset and set screws mm inside-to-inside gusset and set screws 2 D mm to mm inside-to-inside gusset and set screws E mm inside-to-inside gusset and set screws * For smaller quantities, please contact your local distributor. GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
15 -14 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors orner rackets One bracket connects two or three profiles ompatible with square or radius profiles Provides neat, finished appearance D racket: die-cast zinc over caps: black polyamide Screws: zinc-plated steel mm corner bracket with fasteners mm radius cover cap mm square cover cap mm corner bracket with fasteners mm radius cover cap mm square cover cap mm corner bracket with fasteners mm radius cover cap mm square cover cap mm corner bracket with fasteners mm radius cover cap mm square cover cap mm corner bracket with fasteners racket/ ap Size mm 0mm mm 45mm 50mm Dimension in mm D Screw Size Sx1 Sx25 S12x0 S12x0 S12x0 50mm square cover cap Replacement screw for mm bracket: DIN 751 Sx1 flat-head screw Replacement screw for 0mm bracket: Sx25 flat-head screw Replacement screw for mm, 45mm, or 50mm bracket: S12x0 flat-head screw
16 /07 luminum Framing Linear Motion and ssembly Technologies -15 Section : Profile onnectors orner ube Kits 2S Use 2S version to connect two profiles, or S version to connect three profiles Includes self-tapping screws and cover caps to provide neat, finished appearance orner cube: die-cast aluminum over caps: black polyamide Screws: steel ube Size mm 0mm mm 45mm 50mm S Dimension in mm Screw Size Sx1 Sx25 S12x0 S12x0 S12x0 mm corner cube kit 2S mm corner cube kit S mm corner cube kit 2S mm corner cube kit S mm corner cube kit 2S mm corner cube kit S mm corner cube kit 2S mm corner cube kit S mm corner cube kit 2S mm corner cube kit S
17 -1 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors Self-Tapping onnection Screws ccess Hole over (for S12 only) 9.5mm/9.mm T25 Torx Head S 1 or 4mm Socket Head S 1 Provides strong connection with high resistance to vibration vailable as Torx head or standard hex socket head Self-threading for quick, easy installation Does not obstruct T-slot Machining Required: ccess hole (see chart for size) ccess Hole (see chart) Self-Tapping Screw (S12x0 shown) T Torx Head or 5mm Socket Head Screw: zinc-plated industrial grade. steel over cap: black polyamide Screw Size ccess Hole ccess Hole over (in mm) S 25 S 25 Sx1 Sx25 S12x0 Ø5.mm Ø7.mm Ø9.mm N/ N/ 9.5 / 9. T50 Torx Head S12 0 or mm Socket Head ssembly Note S12 Never tap the center bore of profiles when using self-tapping screws. When using S and S12 self-tapping screws, use anti-rotation T-blocks to ensure profile alignment. 0 Sx1 self-tapping connection screw, mm socket head Sx1 self-tapping connection screw, T25 Torx head Sx25 self-tapping connection screw, mm socket head Sx25 self-tapping connection screw, T Torx head mm swivel-in anti-rotation T-block (optional), (see next page for details) S12x0 self-tapping connection screw, mm socket head S12x0 self-tapping connection screw, T50 Torx head 9.5/9.mm access hole cover mm swivel-in anti-rotation T-block (optional) (see next page for details) GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
18 /07 luminum Framing Linear Motion and ssembly Technologies -17 Section : Profile onnectors M12 onnection Screws ccess Hole over 9.5mm/9.mm T50 Torx Head or mm Socket Head Provides strong connection with high resistance to vibration vailable as Torx head or standard hex socket head Does not obstruct T-slot Ø9.mm ccess Hole 0 0 Machining Required: 9.mm access hole enter bore of profile tapped M12 M12 Screw Use M12 Tap on 12mm enter ore M12 M12 Screw: zinc-plated industrial grade. steel over cap: black polyamide M12x0 connection screw, mm socket head M12x0 connection screw, T50 Torx head 9.5/9.mm access hole cover mm swivel-in anti-rotation T-block (optional) (see below for details) nti-rotation T-lock mm 11.7 mm Swivel-in installation Prevents rotation at connection point Large surface area contact with profile s T-slot ensures solid grip Ideal for use with connection screws Screw: zinc-plated industrial grade. steel mm swivel-in anti-rotation T-block mm swivel-in anti-rotation T-block GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
19 -1 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors M1 onnection Screw onnection using M1 connection screw WITHOUT bushing and washer Ø2 Interlocking joint WITHOUT bushing and washer Ø17 Tapped M1 onnects profiles with 1mm center bore at right angles Machining Required: See diagram at left Screw: zinc-plated industrial grade. steel M1 connection screw M1x
20 /07 luminum Framing Linear Motion and ssembly Technologies -19 Section : Profile onnectors olt onnector Kits Type 1 Ø17 Ø11 7. Provides strongest right-angle connection entering pin eases alignment and assembly Includes two cover caps to create neat, finished appearance Obscures profile T-slot: panels or panes must be trimmed Machining Required: Through hole in one profile: see chart Through-hole diameter = D 2 1 olt connector: zinc-plated. steel over caps and alignment pin: black polyamide Description Lot Size* Part Number olt onnector Size 0mm mm 45mm 50mm 0mm 0mm 90mm 0mm.4 Dimension in mm Ø D mm bolt connector kit for mm bolt connector kit for mm bolt connector kit mm bolt connector kit mm bolt connector kit mm bolt connector kit mm bolt connector kit mm bolt connector kit mm bolt connector kit * For smaller quantities, please contact your local distributor. GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
21 - Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors 11x0mm olt onnector Kits Provides strong right-angle connection Versions available for attaching 11x0 profile to profiles with mm or mm T-slots olt connector, screw, and T-nut: zinc-plated steel Machining Required: 11mm hole through 11x0 profile 11 Ø11 11x0mm bolt connector kit x0mm bolt connector kit * For smaller quantities, please contact your local distributor. 15x22.5mm olt onnector Kit Provides strong right-angle connection for 15x22.5 profile olt connector, screw, and T-nut: zinc-plated steel Machining Required: 17mm through-hole (see drawing) Description Lot Size* Part Number 15x22.5mm bolt connector kit * For smaller quantities, please contact your local distributor. ross onnector Kit 44 Provides strong, torque-resistant connection to support heavy loads ommonly used in conveyor leg sets and machine frames Works with 45- and 90-series profiles, as well as 0x90H Zinc-plated steel Machining Required: 0mm wide milled slot M Nut and Washer ross connector kit
22 Ø11 / Ø17 21 / /07 luminum Framing Linear Motion and ssembly Technologies -21 Section : Profile onnectors Quick onnectors/rigid 1.5 Ø Vertical access Quickly and easily connect mm, mm and mm profiles at right angles Fast assembly and disassembly: ideal for temporary structures such as trade show displays and fixtures Keeps three T-slots open for mounting panels or accessories hoose either perpendicular or parallel options Stainless steel & Zinc-plated. steel / 50 Machining Required: 11mm barrel: 11mm through-hole 17mm barrel: 17mm through-hole Description Lot Size* Part Number Ø11 / Ø17 / 50 Vertical access Quick connector/rigid for Vertical access. Includes mm T-bolt, mm barrel. Quick connector/rigid for Vertical access. Includes mm T-bolt, 11mm barrel. Quick connector/rigid for Vertical access. Includes mm T-bolt, 11mm barrel. Quick connector/rigid for Vertical access. Includes mm T-bolt, 17mm barrel. Quick connector/rigid for Horizontal access. Includes mm T-bolt, 11mm barrel. Quick connector/rigid for Horizontal access. Includes mm T-bolt, 17mm barrel. * For smaller quantities, please contact your local distributor. 21 / 2.5 Horizontal access GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
23 -22 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Other 90 Right-ngle onnectors mm, mm, & mm Mitered orner onnectors Used to connect profiles whose ends have been cut at a 45 angle pplications include doors and window frames Includes set screws Zinc-plated steel Machining Required: 45 miter on profile corners Mitered orner onnector Size mm mm mm Dimension in mm Set Screw 4 4 M4x5 4 4 Mx 0 0 Mx Description Lot Size* Part Number mm mitered corner connector mm mitered corner connector mm mitered corner connector * For smaller quantities, please contact your local distributor.
24 /07 luminum Framing Linear Motion and ssembly Technologies -2 Section : Profile onnectors T-onnector Kits 0x0 T-onnector Kit M5x1 0 0 Includes all fastening hardware an be used ONLY with 0x0 profiles Machining Required: M tap in end of one profile Mx0 25Nm M5x1 Nm 15 Die-cast zinc Mx0 0x0 T-connector kit x, 45x45, & 50x50 T-onnector Kits Mx Includes all fastening hardware Includes self-tapping screw; no machining required S12x0 5Nm Mx Nm Die-cast zinc 15 S12x0 x T-connector kit x45 T-connector kit T-onnector Size Dimension in mm 50x50 T-connector kit mm 45mm 50mm
25 -24 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors 10 Straight-Line onnectors End onnector Kits 0x0 End onnector Kit Mx25 Ideal for extending profiles beyond standard available length Includes all fastening hardware an be used ONLY with 0x0 profiles Machining Required: M tap in end of both profiles Mx Nm Mx25 25Nm Die-cast zinc 0x0 end connector kit x, 45x45, & 50x50 End onnector Kits 15 S12x0 Ideal for extending profiles beyond standard available length Includes all fastening hardware Includes self-tapping screws; no machining required Die-cast zinc Mx Nm S12x0 5Nm End onnector Size mm 45mm 50mm 15 Dimension in mm x end connector kit x45 end connector kit x50 end connector kit Helpful Hint onnector provides easy attachment of vertical extension profiles, permitting quick breakdown of system for easy shipment.
26 /07 luminum Framing Linear Motion and ssembly Technologies -25 Section : Profile onnectors mm & mm onnection Link Kits 1 1 Provide a heavy-duty connection extending profiles beyond standard available length Ideal for use in perimeter guarding and conveyor rails Includes all fastening hardware; no machining required Zinc-plated steel 10 mm connection link kit, 50mm long mm connection link kit, 10mm long mm connection link kit, 10mm long End-to-End olt onnector Kits & Ø17 /45 Provide a strong end-to-end for any mm T-slotted profile over caps conceal through-hole and connector, and provide neat, finished appearance & For precise positioning when drilling through-holes, use drilling/boring jig Machining Required: Ø mm through-hole arrels and screws: zinc-plated steel,. over caps: black polyamide End-to-end bolt connector kit, mm End-to-end bolt connector kit, 45mm Universal end-to-end bolt connector kit GoTo boschrexroth-us.com/framing to get these in stock items FST from your local distributor
27 -2 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors 45 ngle onnectors 45 ngle onnector Kit 0mm Sx25 Self-tapping Screws Mx1 Screw & mm T-Nut Mx12 Screw & mm T-Nut onnects 0x0 profiles end-to-end at a 45 angle Make a 45 end-to-side connection between a 0x0 profile and any profile with mm or mm T-slots Includes all hardware, adapters, and cover cap for a neat, finished appearance onnector: die-cast zinc dapters and cover cap: black polyamide 45 angle connector kit 0mm ngle onnector Kit mm S12x0 Self-tapping Screws onnects x profiles end-to-end at a 45 angle Make a 45 end-to-side connection between a x profile and any profile with mm T-slots Includes all hardware, adapters, and cover cap for a neat, finished appearance Mx T-olt & Nut 45 onnector: die-cast aluminum dapters and cover cap: black polyamide 45 angle connector kit mm
28 /07 luminum Framing Linear Motion and ssembly Technologies -27 Section : Profile onnectors 45 ngle onnector Kit 45mm S12x0 Self-tapping Screws onnects 45x45 profiles end-to-end at a 45 angle Make a 45 end-to-side connection between a 45x45 profile and any profile with mm T-slots Includes fasteners for several connection options Includes cover caps for a neat, finished appearance Mx T-olt & Nut 45 onnector: die-cast aluminum over cap: black polyamide 45 angle connector kit 45mm Design Engineering Tip Save Time with eommerce Pricing and ordering are easy with our eommerce website. You can check prices on one or more items in your drawing, and when you're ready, place the order on-line. Or, if you prefer, just print the quote and submit it to your local distributor. heck us out at:
29 -2 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Multi-ngle onnector Kits 0x0 Multi-ngle onnector Kit a 12 b c c Includes hardware to connect two profiles with mm T-slots side-by-side or use mm M T-nuts to connect (part number ) profiles with mm T-slots onnect the end of a 0x0 profile (including 0x0 2S and S) to the side of a profile with mm or mm T-slots (requires one 0mm bolt connector kit, sold separately) onnect two 0x0 profiles end-to-end (requires two 0mm bolt connector kits, sold separately) Joint components: die-cast zinc Ø11mm through-hole Ø11mm through-hole Machining Required: 11mm through-hole, 15mm from end of profile for each end-to-end connection Description Lot Size* Part Number 15 Multi-ngle onnector Dimension in mm a b c max. in Nm 0x0 multi-angle connector kit mm bolt connector kit** x0 x * For smaller quantities, please contact your local distributor. **One kit required for each end connection x Multi-ngle onnector Kit a 12 b c c onnect two profiles with mm T-slots side-by-side onnect the end of any x profile to the side of a profile with mm T-slots onnect any two x profiles end-to-end vailable as standard or lockable version (locking handle sold separately below) Includes all fasteners, no machining required Joint components: die-cast zinc, nickel-plated x multi-angle connector kit x multi-angle connector kit, lockable Locking handle, mm
30 /07 luminum Framing Linear Motion and ssembly Technologies -29 Section : Profile onnectors 45mm and 0mm Multi-ngle onnector Kit 12 reate a side-to-side, end-to-side, or end-to-end connection llows angle to be adjusted without loosening any screws or T-nuts, or can be pinned in place for a fixed connection Maximum torque loading Includes all fasteners, no machining required Joint components: die-cast zinc, nickel-plated Multi-ngle onnector Dimension in mm max. in Nm 45x45 multi-angle connector kit x45 45x0 0x45 0x x0 multi-angle connector kit x45 multi-angle connector kit x0 multi-angle connector kit ssembly Note F2 L 00 F f [mm] FxL [Nm] x10 F1 F2 0 45x90 0x0 0x0 45x45 0x0 F1,000 N 15,000 N,000 N F2 00 N 1,000 N 1,0 N x0 45x45 0x0 5 f[mm]
31 -0 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors Multi-ngle onnectors Variable ngle olt onnectors Provide a simple and easy way to connect profiles at various angles llow one-time bend to desired angle, with correction bend of up to F max 0x0 24 Nm 45x45 1 Nm 45x45H 145 Nm Keep three T-slots open for panels or accessories Use drilling/boring jigs (listed below) for proper through-hole spacing Tie-rod: stainless steel F max F max 10 N 1500 N 5 Nm 1 Nm 1500 N 1 Nm arrel: galvanized steel F max 50 N 00 N 10 N F max Nm 95 Nm 10 Nm End-to-End Variable ngle olt onnectors mm.9 mm llowable angle up to 90 onnects two profiles end-to-end Machining required: 11mm through-hole (mm profiles) or 17mm through-hole (mm profiles) in both profiles Ø11mm through-hole for Ø17mm through-hole for min 90 max Description Lot Size* Part Number mm end-to-end variable angle bolt connector mm end-to-end variable angle bolt connector * For smaller quantities, please contact your local distributor.
32 /07 luminum Framing Linear Motion and ssembly Technologies -1 Section : Profile onnectors End-to-Side Variable ngle olt onnectors mm llows angles from 45 to 15 onnects the end of one profile to the side of another Machining required: 11mm through-hole (mm profiles) or 17mm through-hole (mm profiles) in both profiles Ø11mm through-hole for Ø17mm through-hole for mm min 15 max Description Lot Size* Part Number mm end-to-side variable angle bolt connector mm end-to-side variable angle bolt connector * For smaller quantities, please contact your local distributor. ssembly Note When making angled connections, locate through-holes in the profiles as specified below. Use the mm or mm drilling/boring jig (sold at right, or see the Tools section for details) for proper spacing. Ø11mm hole Ø17mm hole mm drilling/boring jig mm drilling/boring jig Through-hole Prior to installation, bend connector to within ± of desired angle
33 -2 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors djustable ngle Gusset Kits mm T-nut mm T-nut djustable ngle Gusset Size mm 45mm D M M. mm T-nut 2 mm T-nut E Dimension in mm D llows quick adjustment to any angle onnects anywhere along profile T-slots Optional T-slot alignment pins simplify positioning and assembly vailable as gusset only or as a kit with mounting hardware Gusset: die-cast zinc Mounting hardware: zinc-plated steel lignment pins and adapters: black polyamide 0mm adjustable angle gusset only mm adjustable angle gusset kit for 0mm adjustable angle gusset kit for mm adjustable angle gusset kit only mm adjustable angle gusset kit for E 45mm adjustable angle gusset only mm adjustable angle gusset kit for
34 /07 luminum Framing Linear Motion and ssembly Technologies - Section : Profile onnectors Joining Plates Fasten to the outside faces of the profiles, leaving the inner T-slots free for panels or accessories. an be added to reinforce a structure after initial assembly Four different styles available in a variety of sizes 0-, 45-, and 90-series: clear anodized 0-T aluminum 0- and 0-series: zinc-plated steel Recommended fasteners (order below): 0-series (mm T-slots): Mx12 HS DIN 9427 and M mm T-nut OR mm T-bolt fastening kit, L=2mm 45-, 0-, 90-, and 0-series (mm T-slots): Mx1 HS DIN 9427 and M mm T-nut OR mm T-bolt fastening kit, L=24mm Fasteners for Joining Plates Use mm fasteners for attaching joining plates to 0-series profiles Use mm fasteners for attaching joining plates to 45-, 0-, 90-, and 0-series profiles Use button-head cap screws and T-nuts to create a high-tech, smooth riveted look, or use T-bolt kits for a more rugged look Zinc-plated steel mm T-bolt fastening kit, L=2mm Mx12 HS, DIN mm M T-nut mm T-bolt fastening kit, L=24mm Mx1 HS, DIN mm M T-nut
35 -4 Linear Motion and ssembly Technologies luminum Framing /07 Section : Profile onnectors orner Joining Plates for 0- and 45-series profiles F orner Joining Plate 0-series 45-series Dimension in mm D E F ØG.2. ØG E D D 0-series corner joining plate series corner joining plate Order hardware separately orner Joining Plates for 0-, 90-, and 0-series profiles G ØH D F 90-series orner Joining Plate Dimension in mm 90-series D 4.5 E 19.5 F 4 G.5 ØH. E 90-series corner joining plate DE Order hardware separately T-Junction Joining Plates for 0- and 45-series profiles J D E H T-Junction Dimension in mm Joining Plate D E F G H 0-series series J 5.5 ØK.2. ØK G D E F F Order hardware separately 0-series T-junction joining plate series T-junction joining plate
36 /07 luminum Framing Linear Motion and ssembly Technologies -5 Section : Profile onnectors Joining Plates T-Junction Joining Plates for 0-, 90-, and 0-series profiles 90-series ØL K J D T-Junction Joining Plate 90-series D Dimension in mm E 9.5 F 4.5 G 19.5 G 1 H 4 J 174 K.5 D F E G 90-series T-junction joining plate Order hardware separately Rectangular Joining Plates for 0- and 45-series profiles ØG F D E Rectangular Joining Plate 0-series 45-series Dimension in mm D E F 5.5 ØG.2. ØL. H G F E Order hardware separately 0-series rectangular joining plate series rectangular joining plate
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationAssembly Instructions
Unite Panel System Hinge Door July 2016 #12 x / slotted hex washer head bolt Figure 1 threshold bracket frame Detail F threshold bracket threshold bracket (installed) #12 x / slotted hex washer head bolt
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationGRAND PIANO HARDWARE AND ACCESSORIES
GRAND PIANO HARDWARE AND ACCESSORIES LID SUPPORT CUP No. 938 - Solid brass. Each No. 938N - Nickel plated. Each GRAND RAIL PROP NUTS Slotted grand rail prop nuts for replacement. Solid Brass. No. 925 -
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating and
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationLab Style Table Frame Part No Assembly Guide Automation Technology
Ergonomic Workstations Lab Style Table Frame Part No. 8 0 Assembly Guide 7 90 70 Automation Technology SPECIFICATIONS Lab style frame part number... 80 Height... 70 mm (8.") Width... 90 mm (.7") Depth...
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationMast Solutions Document/Installation Manual
Mast Solutions Document/Installation Manual The Mast family from Veritas is the perfect answer to movable and stationery partitions and room dividers, and hinged doors. This system is extremely versatile
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationAssembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852
. Assembly, Installation, Operation and Maintenance Instructions Kit, Base Rail Bracket Part # 31852 Dealer / Installer: Provide a copy of these instructions to the end user of this product. These instructions
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for FortressCable H-Series Stair Panels with Simplified Stair Bracket SSB-05 and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationConnectors slot fasteners
Description Slot nut () The slot nut is directly adapted to the T-slot of the structural system. On the support beam, the slot nut may be entered into the T-slot from the beam side, thus making it very
More informationFastening Technology. The Strong
100 The Strong Fastening Technology A few years ago connecting without drilling, milling or welding was almost unthinkable. It is obvious that if you can eliminate machining or welding from the process
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationSensor Accessories Retroreflectors and Retroreflective Tape 8-2
- Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors Contents Overview.................... - Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
More informationINSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
More informationFLOE DOCK FURNITURE WARNING ASSEMBLY INSTRUCTIONS
FLOE DOCK FURNITURE ASSEMBLY INSTRUCTIONS KIT P/N 510-00400-02 KIT P/N 510-00405-02 KIT P/N 510-00406-02 KIT P/N 510-00410-02 WARNING IT IS THE INSTALLER S RESPONSIBILITY TO PROPERLY INSTALL this chair
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationmk Profile Technology
mk Profile Technology One Construction Kit, Many Options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion better products, better solutions One basic technology, four
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationVPN: ISBXLR. Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
VPN: ISBXLR Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM649-R2 RM657 RM664 RM861 RM650 RM658-R2 RM665-R2
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for Fortress Horizontal Cable Panel System with UB-05 Brackets and Fe Posts It is the responsibility of the installer to meet all code and safety requirements, and to obtain all
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More informationAMETAL SHAPER is indispensable for certain METAL SHAPER FOR YOUR SHOP. By S. S. Miner
METAL SHAPER FOR YOUR SHOP By S. S. Miner AMETAL SHAPER is indispensable for certain machining operations where flat surfaces must be produced within very close limits, such as machining flats on castings,
More informationFortress Fe Posts must always be secured to the deck framing. Fortress Fe Posts should never be attached to only the deck boards.
Installation Instructions for FortressCable V-Series Cable Stair Panel System with UB-05 With ngle dapter and Fe Posts It is the responsibility of the installer to meet all code and safety requirements,
More informationFortress Railing Overview ACTUAL FREIGHT CHARGES APPLY TO ALL FORTRESS RAIL ORDERS
Fortress Railing ONLY available in: Fortress Railing Overview 4 1 3 Al 13 Aluminum Railing Systems Fortress 2 Use the steps below for the following pages to complete your rail Fortress Full Glass Panels
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS Horizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications: Confirm
More informationINSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger
INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.
More informationKwik-Lock. Installation Instructions. Attention Dealers: Please give this owners manual to the customer when the product is delivered.
Serving the Truck & Trailer Industry Since 1944 Installation Instructions Attention Dealers: Please give this owners manual to the customer when the product is delivered. Call 800-535-9545 www.aeroindustries.com
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationPlease read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment.
Please read BOTH these and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed by Blue Ox Dealers who
More informationFortress Al HOME posts must always be secured to the deck framing. Fortress Al HOME posts should never be attached to only the deck boards.
Installation Instructions for Fortress Al HOME Traditional Adjustable Panels with Simplified and Al HOME Posts It is the responsibility of the installer to meet all code and safety requirements, and to
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationHONDA RIDGELINE (KIT #601) Installation Instructions (to be used in addition to owners manual)
HONDA RIDGELINE (KIT #601) Installation Instructions (to be used in addition to owners manual) IMPORTANT NOTE: Read before beginning installation. These instructions replace all of Step 1 of the instructions
More informationAdjustable Height Workstation Kit
Ergonomic Workstations Adjustable Height Workstation Kit Assembly Guide Installation and Maintenance Publication Number: 8981 500 300 7/02 Adjustable Height Workstation 2 Table of Contents Important Safety
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationInstallation *HDWL-INSTR-001* IMPORTANT. Plastic Laminate Restroom Partitions Floor-Mounted with Overhead Brace Series 400
Plastic Laminate Restroom Partitions Floor-Mounted with Overhead race Series 400 For Standard Height Doors and Panels Only Table of ontents Pre- Information...2 Layout Dimensions for rackets...3 Mounting
More informationEaton Data Center Solutions. Installation Guide Cage System Assembly Publication No. MN159005ZU
Eaton Data Center Solutions Installation Guide Cage System Assembly Publication No. MN159005ZU Copyright 2013 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is
More informationPRODUCT CATALOGUE ENCLOSURES AND SAFETY GUARDS
PRODUCT CTLOGUE ENCLOSURES ND SFETY GURDS Profile system TC Copyright FlexLink 2017 The contents of this publication are the copyright of the publishers and may not be reproduced (even extracts) unless
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 16-1/4 Attachment Tab Width: 21-3/4 Please read BOTH these and the General Instructions prior to installing or operating this equipment. Serial Number 1. Blue Ox towing products
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationCONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013
U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationINSTALLATION INSTRUCTIONS DODGE RAM 2 & 4WD 1500 PART # P5058
INSTALLATION INSTRUCTIONS 2009-13 DODGE RAM 2 & 4WD 1500 PART # P5058 PARTS LIST: Qty Description Qty Description 1 Grille Guard 12 12-1.75mm Hex Nuts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationTrim & Auxiliary. Table of Contents
Trim & Auxiliary At Hager Companies, we know all about the importance of adding the finishing touches to your building projects. That s why we re proud to offer more than 200 different trim & auxiliary
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More informationTOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR FORD FLARESIDE TRUCKS
TOOL LIST FOR TAILGATE HIDDEN LATCH & LINK ASSY FOR 53-87 FORD FLARESIDE TRUCKS Vise Grip Clamps C-clamps Sharpie Marker Ball Peen Hammer Center Punch 3/8 or 1/2 Drill 5/32, 7/32, 9/32, and 3/8 Drill Bits
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationSingle-point fixing serie S32/35
MNET Single-point fixing Single-point fixing serie S2/ The basic component within the MNET system is the single-point fixing a basic rather than cylindrical bore in the glass, has a tapered countersunk
More informationTaper Bushing Installation
Taper Installation IMPORTNT NOTE: Please follow the instructions on this sheet in order for the Martin bushing to perform satisfactorily. INSTLLTION 1. Clean all oil, dirt, and paint from shaft, bushing
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationThe Nantucket Legacy Arbor
SSEMLY INSTRUTIONS The Nantucket Legacy rbor Please read through before starting assembly. IMPORTNT: HEK THE INSIDE OF YOUR POSTS FOR LL MTERILS. heck ox for These ontents In. the Keystone event of missing
More informationAR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS
MUM066011803 AR15 SUPER SLIM AND ULTRA SLIM FREE FLOAT RAIL SYSTEMS Proudly Designed and Made in USA Super Lightweight, Flush Fitting, and Continuous with Flat Top AR15 Upper Receiver Features Integral
More informationATLANTIS RAIL Contact Information
ATLANTIS RAIL Contact Information Customer Service (800) 541-6829 (508) 732-9191 Spectrum System Installation Instructions Atlantis Rail s Spectrum System is an easy to install, universal cable railing
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More informationTYPICAL STANDOFF GLASS RAIL ELEVATION TYPICAL SECTION RS0B20 WITH RECTANGULAR BACK PLATE TYPICAL STAIRS
Revisions By: CRL SRS STANDOFF RAILING SYSTEM CRL GLASS RAIL S RS0B20 w/ RECTANGULAR BACK PLATE CRL'S GLASS RAIL S CAN BE USED FOR MOUNTING GLASS PANELS UP TO 3/4" (19 MM) IN THICKNESS. THE 4" X 8" (102
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems without A/C #13605 / #13625
Small lock Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems without /C #13605 / #13625 illet Specialties, Inc. 500 Shawmut venue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More informationInstallation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
More informationFINISTA SLIM ALUMINIUM SYSTEM. Finista Slim Aluminium System. > Multifunctional, Versatile, Simple
INIST SLIM LUMINIUM SYSTM inista Slim luminium System > Multifunctional, Versatile, Simple inista Slim luminium System The inista Slim luminium System is a multifunctional shelving program that will allow
More information11 MACHINING SERVICES
11 MACHINING SERVICES Machining your TSLOTS is an alternate way of assembling your project. Rather than using brackets and joining plates you can have your TSLOTS machined and ready in kit form for quick
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationMANET. Technical manual for ordering and installation. Single-point fixings for interior applications
MNET Technical manual for ordering and installation Single-point fixings for interior applications DORM MNET Glass design system MNET ONEPT MNET OMPT Sets Today s approach to office design tends to be
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationTOOLS REQUIRED Metal Wood Wood and Metal Screws. #16 Drill #12-24 Tap. 1/8 Drill
DEVICES COVERED IN THIS DOCUMENT: 4700S Surface Vertical Rod Device 4700SF Fire Exit Surface Vertical Rod Device TOOLS REQUIRED Metal Wood Wood and Metal Screws Sex Bolts #7 Drill ¼ -20 Tap #16 Drill #12-24
More informationAir-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
More informationHorizontal Cable Systems
ALUMINUM RAILING INSTALLATION INSTRUCTIONS v2012 orizontal Cable Systems 1) Check Contents Of Packages: Verify that all parts have arrived and that they match the packing list. 1A) Coastal applications:
More informationSection Q-3: Bessey Clamps. Section Q-3: Bessey Clamps. Bessey Clamps. Last Updated: 07/02/10
Section Q-3: Bessey Clamps Section Q-3: Last Updated: 07/02/10 Section Q-3: K Body Parallel Clamps Series Maverick Hardware Large parallel jaw surfaces made from non-marring polyamide Internal steel frame
More informationPRODUCT: TJ Corner Guards READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST
PRODUCT: TJ Corner Guards READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 7:00 AM 5:00 PM PST The MetalCloak experience includes the ease of installation of our products.
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationWARNING. BX Saturn SC Saturn SC Saturn SL, SL Saturn SL2, SW Saturn SW1 Installation Instructions
Please read BOTH these Installation Instructions and the General Instructions before attempting to install or operate this equipment. 1. Blue Ox towing products and accessories are intended to be installed
More informationWARNING. B as e plate s. BX Saturn L Series Installation Instructions. Serial Number
B as e plate s BX3323 Please read BOTH these and the General Instructions before attempting to install or operate this equipment. Serial Number 1. Blue Ox towing products and accessories are intended to
More informationABM International, Inc. Navigator Assembly Manual
ABM International, Inc. 1 1.0: Parts List Tablet (Qty. 1) Tablet mount (Qty. 1) NOTE: Mount may appear and operate different then image below Control Box (Qty. 1) Motor Power Supply (Qty. 1) 2 X-axis motor
More informationStraight Stringer Installation Instructions
Straight Stringer Installation Instructions Floor-to-Wall Installation F L I G H T P L A N Unpack: What s included? Your Stringer Tread Screws (8) per tread (1) Torque Wrench (1) Socket (for the brackets
More informationPickup Box Utility Rack Package Installation (Instruction ID: )
017 Chevrolet Colorado Pickup - WD (VIN S) Canyon, Colorado Accessory Installation Manual N America Document ID: 3966961 Pickup Box Utility Rack Package Installation (Instruction ID:3144879) Installation
More informationBX Toyota Tacoma (Includes Prerunner) Installation Instructions
Attachment Tab Height: 11.5 Attachment Tab Width: 30.5" Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More information