HICKORY SAW & TOOL, INC.

Size: px

Start display at page:

Download "HICKORY SAW & TOOL, INC."

August Doyle
5 years ago
Views:

HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.

1 HICKORY SAW & TOOL, INC th Street S.E., Hickory, N.C P.O. Box 2407, Hickory, N.C Telephone: (828) Fax: (828)

2 Table of Contents Cover page Dedicated Insert raised panel cutters Stile & rail cutter sets Multi-profile cutters..7-8 Finger joint cutters...9 Pricing on Service work, saw blades, dado sets ICK Inserts Panel saws.19 Split scoring & conic scoring saws 20 Hogging units Type C four flute countersinks Woodworking drills, countersinks, multi-spur and boring bits Diamond tipped cutters and router bits Hydraulic and straight bore moulder heads HSS, jointer and planer knives Tool holders & collets ONSRUD Solid carbide bits Carbide tipped straight bits Stagger tooth & mortise bits Round and half-round bits..134 V-Groove, Panel, and cove bits Rabbeting, round-over, ogee, flush, and Laminate bits Solid Surface and T-Slot bits Edge profile bits Handrail & Molding bits Glue joint bits Groove profiles 149 MDF door profiles Stile & rail router bits Raised panel router bits Cabinet, Door & Drawer, Window Sash bits Dovetail bits.156 Spoilboard & Slotting Dowel drills & Boring Bits Bearings & Accessories Pricing for pages ( ) Conversion Charts Page 2

3 RAISED PANEL CUTTERS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 6 CUTTING CIRCLE BORE: 1-1/4 WINGS: 3 Clockwise or Counterclockwise rotation; material runs face down; T Bushings for ¾ spindle available upon request. Ball bearing rub collars are available upon request. CUSTOM PROFILES AVAILABLE Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 3 Hickory Saw & Tool Fax

4 RAISED PANEL CUTTERS Page 4

5 STILE AND RAIL CUTTER SETS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups, because inserts bolt against precision machined seats. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 4 SMALL CUTTING CIRCLE BORE: 1-1/4 WINGS: 3 Clockwise or Counterclockwise rotation; material runs face down; T Bushings for ¾ spindle available upon request. Ball bearing rub collars are available upon request. CUSTOM PROFILES AVAILABLE Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 5 Hickory Saw & Tool Fax

6 STILE AND RAIL CUTTER SETS Page 6

7 MULTI-PROFILE CUTTERS DETAILS Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the elimination of set ups. Utilizes HSS corrugated back backing plates so multiples of profiles can be achieved using only one cutter by just changing the inserts and backers. All inserts have been designed for soft and hardwood, compound board and exotic hardwoods. TECHNICAL SPECIFICATIONS: DIAMETER: 4 SMALL CUTTING CIRCLE BORE: 1-1/4 WINGS: 3 Available in 40mm or 60mm wide; Clockwise or Counterclockwise rotation achieved with same cutter; material runs face down; T Bushings for ¾ spindle available upon request. Ball bearing rub collars are available upon request. MOULDER & TENON HEADS ALSO AVAILABLE These insert cutters can be supplied in any diameter and bore size per your requirements. Hickory Saw and Tool can produce cutting tools to your exact specifications from wood samples, drawings, sketches, or existing tools. MADE IN THE USA These insert heads are produced in our Hickory, NC facility. Each cutting tool is specifically designed for your needs according to your specifications to achieve the best possible results. Page 7 Hickory Saw & Tool Fax

8 MULTI-PROFILE CUTTERS Page 8

9 Page 9 Hickory Saw & Tool Fax

10 PRICE LIST FOR C.T. CIRCULAR SAW BLADES ======================================================================= #OF TEETH DIA. > 0 TO 18" OVER 18" UP TO 36" $ $ $ $ $ $ $ $ $ $ TIP REPLACEMENT =================== U P TO.220 KERF $1. 50 EA. TIP OVER.220 KERF SEE GROOVER TIP PRICE COMPLETE RETIP =================== TIP PRICE (X) NUMBER OF TEETH (NO SHARPENING CHARGE) ================================================================== DADO SETS ================== DADO SAWS SEE SHARPENING PRICES DADO FILLERS: KERF SHARPENING TIP REPLACEMENT / $ $4. 00 (EA. TIP) 1 / $ $4. 00 (EA. TIP) 3 / $ $4. 00 (EA TIP) 1 / $ $5. 00 (EA. TIP) 5 / $ $6. 00 (EA. TIP) 3 / $ $7. 00 (EA. TIP) 1 / $ $8. 00 (EA. TIP) RETIP #OF TIPS (X) TIP PRICE (NO SHARPENING CHARGE) =================================================================== MISCELLANEOUS SAW CHARGES OPENING BORE CHARGES ============================ UP TO 1" $ " TO 1 1/2" $ /2" TO 2 1/2" $ OVER 2 1/2" $ KEYWAYS BUSHINGS $20.00 EA UP TO 1"......$ " TO 2"......$ TO 3".....$ HAMMER AND ROLL FOR TENSION AND STRAIGHTNESS UP TO 18" $2. 00 PER INCH OF DIAMETER OVER 18" $3. 00 PER INCH OF DIAMETER Page 10

11 PRICE LIST FOR SHARPENING CARBIDE TIPPED WING CUTTER # OF WINGS CUTTING EDGE WIDTH 1 / 2" 1" 1-1/2" 2" 2-1/2" 3" 3-1/2" 4" 4-1/2" 2 $16.00 $16.00 $17.50 $17.50 $17.50 $20.50 $ $ $19.00 $19.00 $20.50 $23.00 $23.00 $23.00 $25.00 $25.00 $ $20.00 $20.00 $22.50 $25.00 $25.00 $25.00 $27.50 $27.50 $ $22.00 $22.00 $25.50 $29.00 $29.00 $29.00 $30.50 $30.50 $ $25.00 $25.00 $28.00 $33.00 $33.00 $33.50 $35.50 $35.50 $ $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $ $28.00 $28.00 $31.50 $36.00 $36.00 $36.50 $39.00 $39.00 $39.50 (PRICE FOR OVER 4-1/2" WIDE: ADD $3.00 PER EACH 1/2" LARGER WIDTH) (RETIP PRICES QUOTED UPON REQUEST PER CUTTER) ======================================================================== PRICE LIST FOR GROOVERS # OF WINGS===== KERF> 1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" 2... $9.50 $10.00 $10.00 $11.50 $ $11.50 $11.75 $12.50 $13.25 $ $12.00 $12.25 $13.25 $14.00 $ $13.75 $14.50 $16.00 $16.50 $ $15.00 $15.75 $17.00 $18.00 $ $16.50 $17.25 $18.75 $19.75 $ $19.00 $20.50 $22.50 $23.00 $ $22.00 $23.50 $25.25 $26.00 $ $25.25 $26.50 $29.00 $30.00 $31.75 FOR KERFS OVER 3 / 4" GO TO CUTTER PRICE TIP REPLACEMENT FOR GROOVERS 1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" $8.00 $8.00 $10.00 $12.00 $15.00 COMPLETE RETIP=+ #OF TIPS --NO SHARPENING CHARGE Page 11 Hickory Saw & Tool Fax

12 PRICE LIST FOR SHARPENING PROFILE HEADS # OF WINGS UP TO 6" LONG OVER 6" LONG $22.50 $ $24.50 $ $24.50 $ $27.50 $32.00 FOR MORE WINGS GO TO MOULDER HEAD PRICE ==================================================================== TIP REPLACEMENT IN PROFILE HEADS ===================================== 1 / 4" 3 / 8" 1 / 2" 5 / 8" 3 / 4" $8.00 $9.00 $10.00 $11.00 $13.00 COMPLETE RETIP = # OF TIPS NO SHARPENING CHARGE ======================================================================== PRICE LIST FOR SHARPENING SPIRAL PROFILE HEADS UP TO 6" LONG...$34.50 OVER 6" LONG...$49.00 TIP REPLACEMENT ON SPIRALS QUOTED PER HEAD PRICE LIST FOR SHARPENING STAGGERED TOOTH MOULDER HEADS WIDTH ROWS OF TEETH PRICE 4 4 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $93.00 Page 12

13 PRICE LIST FOR MISC. ITEMS WIDTH: HSS AND C.T. CARVING CUTTERS 0 TO 2" CEL. SHARPEN AND TURN DOWN COLLARS $45.00 HSS AND CT ROUTER BITS STRAIGHT CUT... $8.00 GROUND TO PATTERN 2 WING... $19.00 GROUND TO PATTERN 4 WINGBUC...$22.00 REGRIND ENDS... $ 2.50 CUT OFF... $ 3.50 REPROFILE 2 X SHARPENING PRICE ================================================================ HAUNCHING CUTTERS SHARPENING 2 PC. X 3" MAX CEL.....$ PC. OR 3" PLUS CEL....$ RETIP - - 3/4" TO 1-1/2"...$ EA. PC. 1-9/16" TO 3"...$ EA. PC. ======================================================================== STRAIGHT CUTTING EDGE CORR.BACK MOULDER KNIVES HSS $1.00 PER INCH OF CEL. C. T. $2.70 PER INCH OF CEL. GROUND TO PATTERN SHAPER & MOULDER KNIVES PER KNIFE SHARPEN & REPROFILE - COST PLUS $10.00 TEMPLATE CHARGE HSS WIDTH OF KNIFE: 1" " " " $ $ $ $ REPROFILE ONLY $13.00 TEMPLATE CHARGE C. T. WIDTH OF KNIFE: 1" " " " $ $ $ $25.00 Page 13 Hickory Saw & Tool Fax

14 PRICE LIST FOR MISC. ITEMS DRILL SHARPENING HSS. AND C.T. CARBIDE TIPPED HSS BRADPOINT 1 / 8 " TO 1 / 2 " $4.50 = = = = = = = = = == = = = UP TO 5 / 16 " $ / 64 " TO 1" $5.50 = = = = = = = = = = = = = = 11 / 32 " TO 1 / 2" $ / 16 "TO 3 / 4" $ / 16 " TO 1-1 / 8 " $6.50 MULTI SPUR BIT SHARPENING HSS SHARPENING C.T. SHARPENING UP TO 1-1 / 2 " DIA $8.00 EA $9.50 EA. 1-9 / 16 " TO 2-1 / 2 " - - $9.50 EA $11.00 EA. 2-9 / 16 " TO 3-1 / 2 " - - $10.00 EA $12.50 EA. OVER 3-1 / 2" $14.00 EA $16.00 EA. MULTI SPUR TIP REPLACEMENT TIPS $ EA. TIP 5 + TIPS $ 9.00 EA. TIP CHIP LIFTERS $ EA. TIP STEEL MOULDER FEED WHEEL SHARPENING UP TO 2 " $65.00 EA " TO 3 " $80.00 EA. OVER 3 " WIDE ADD $10.00 PER INCH OF WIDTH (STANDARD FEED WHEELS ONLY - OTHERS QUOTED UPON REQUEST) REMILLING GROOVES IN FEED WHEELS $60.00 EA. REHARDENING FEEDWHEELS $35.00 EA. BANDSAW GUIDE WHEELS # 0 WHEELS $ EA # 1 WHEELS $ EA. BANDSAW GUIDE JAWS PLAIN JAWS C. T. JAWS # $80.00 EACH SET OF 4 PCS $ EACH SET OF 4 PCS. # $90.00 EACH SET OF 4 PCS $ EACH SET OF 4 PCS. RETIP BANDSAW GUIDE PRICE $ PER END TANNEWITZ R - 84 AND R- 84A JAWS PLAIN AND CT ARE AVAILABLE BANDSAW THROAT PLATES SQUARE $ EA. ROUND $48.00 EA. Page 14

15 PRICE LIST FOR BANDSAW BLADES AND ROLL STOCK =================================================================== LENGTH WIDTH (IN FEET)--- 1 / 8 3 / 16 1 / 4 3 / 8 1 / 2 3 / FOR IN BETWEEN SIZES GO TO THE NEXT LONGER SIZE ALL WOOD CUTTING BLADES UP TO 8' LONG - - -$9.00 EA STANDARD METAL CUTTING 64-1/2" X 1 / $10.00 EA BANDSAW STOCK ROLL PRICES.025 OR.032 THICK 1 / $ / $ / $ / $ WELD PRICES UP TO 1 / 2 WIDE $4.00 OVER 1 / 2 WIDE $5.00 BI-METAL BLADES $10.00 SHARPENING CHARGE FOR BLADES UP TO 3 / 4 WIDE $4.50 OVER 3 / 4 WIDE $9.00 SHARPENING CHARGE FOR SPIRAL ROUTER BITS UP TO 1/2"DIA. 2 WING UPCUT OR DOWNCUT...$ /8"DIA. AND UP...$ WING AND UP (ANYSIZE)...$15.00 SPIRAL COMPRESSION...2 FLUTE...$ FLUTE...$25.00 Page 15 Hickory Saw & Tool Fax

16 NEW CARBIDE TIPPED SAWS (FLAT A.T.B. & T. CHIP) DIAMETER NO. TEETH 8" 10" 12" 14" 16" 18" 20 $ $ $87.00 $ $ $ $95.25 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ DADO HEADS DADO SAWS------PER ABOVE SAW SCHEDULE NEW DADO FILLERS: 1 / 16" 1 / 8" 1 / 4" =================================================================== 10 X 5/8 OR 1 BORE. $34.50 $35.25 $ X 1 BORE... $36.50 $37.00 $ X 1 BORE. $41.25 $56.50 $68.25 (Providing filler blanks are available) BORING CHARGES FOR NEW SAWS ONLY UP TO 1... $ TO 1-1 / 2... $ / 2 TO 2-1 / 2... $25.00 Page 16

17 Standard reversible knives Standard Wendeschneidplatten Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard 35 L W T a T04F T03SMG T10MG TL15 T08SMG mm mm mm mm L W T a T08MF T03SMG T10MG TL15 T08SMG mm mm mm mm L W T a T04F T03SMG T10MG TL15 T08SMG mm mm mm mm Page 17 Hickory Saw & Tool Fax

18 Standard reversible knives Standard Wendeschneidplatten Plaquettes reversibiles standard Coltelli reversibili standard Cuchillas reversibles standard L W T d T08MF T04F T03SMG T10MG TL15 mm mm mm mm For Holz-Her system* R= R= Page 18

19 Page 19 Hickory Saw & Tool Fax

20 Page 20

21 Hickory Saw & Tool Page 21 Fax

22 Page 22

Fuller Countersinks Counterbores Tapered Drills Plug Cutters Step Drills Stop Collars Type C Four Flute Countersinks Used to countersink and counterbore for heads of screws in woods, plastics and

23 Fuller Countersinks Counterbores Tapered Drills Plug Cutters Step Drills Stop Collars Type C Four Flute Countersinks Used to countersink and counterbore for heads of screws in woods, plastics and non-ferrous materials. Heat treated for long tool life. (see explanation on page 3 and size recommendations on page 4) The countersink is held in place with two hex-socket screws and is easily adjustable up and down the drill so only one countersink and length of drill is required for one screw size. Shown above Mounted on a Taper Point Drill with Stop Collar: This combination of Tapered Drill and Countersink, drills, Countersinks and Counterbores in one quick operation. Makes driving screws easier and assures the best possible holding power. Designed for clean cutting and hardened for long wear. Complete list of Taper Point Drills shown on page 6 & 7. Stop Collar (shown above mounted on Type C Countersink) can be furnished to control depth of cut. Stop Collar sizes are shown on page 6. Shown above Mounted on a Brad or Regular Point Drill: This combination can be used to drill and countersink clearance through the material for screws and bolts or to drill pilot holes for other types of screws. The Countersinks can also be mounted on ordinary straight twist drills allowing the screw thread to cut its own hole or by using correct pilot drill size for root diameter of thread allowing shank of screw to force its way into the wood. See Screw Chart on page 4 for screw sizes. Drills are not included unless specified. Types and sizes are shown on pages 36 through 42. To cut wood plug to fit in hole over head of screw, use matching Plug Cutter shown on page 9. Special sizes - Quotation on request. For left hand cutting add 50% to prices shown in price list and add L to stock number. Price includes two hex-socket set screws. Does not include drill or stop collar. See page 118 &119 for replacement set screws and hex keys. C8 Also see page 117 for all sizes of Countersinks mounted on Taper Point Drills (and Stop Collars if required). C4 C92 C16 C244 C324 Stock Number Stock Sizes Cutting Diameter Drill Hole Size Overall Length C2 1/4 5/64 3/4 C3 1/4 3/32 3/4 C4 5/16 7/64 7/8 C44 5/16 1/8 7/8 C65 5/16 9/64 7/8 C410 5/16 5/32 7/8 C411 5/16 11/64 7/8 C43 5/16 3/16 7/8 C56 3/8 3/32 7/8 C57 3/8 7/64 7/8 * C5 3/8 1/8 7/8 * C6 3/8 9/64 7/8 * C7 3/8 5/32 7/8 * C8 3/8 11/64 7/8 * C9 3/8 3/16 7/8 C913 3/8 13/64 7/8 C97 3/8 7/32 7/8 C105 7/16 5/32 7/8 C1011 7/16 11/64 7/8 C103 7/16 3/16 7/8 * C10 7/16 13/64 7/8 C1014 7/16 7/32 7/8 C104 7/16 1/4 7/8 C122 1/2 1/8 7/8 C129 1/2 9/64 7/8 C125 1/2 5/32 7/8 C1211 1/2 11/64 7/8 * C92 1/2 3/16 7/8 * C102 1/2 13/64 7/8 * C12 1/2 7/32 7/8 C1415 1/2 15/64 7/8 * C14 1/2 1/4 7/8 C145 5/8 5/32 1-1/16 * C143 5/8 3/16 1-1/16 C167 5/8 7/32 1-1/16 * C16 5/8 1/4 1-1/16 C1617 5/8 17/64 1-1/16 * C169 5/8 9/32 1-1/16 C1619 5/8 19/64 1-1/16 * C18 5/8 5/16 1-1/16 C243 3/4 3/16 1-1/8 C247 3/4 7/32 1-1/8 C244 3/4 1/4 1-1/8 C245 3/4 5/16 1-1/8 C20 3/4 21/64 1-1/8 C24 3/4 3/8 1-1/4 C284 7/8 1/4 1-1/4 C285 7/8 5/16 1-1/4 C286 7/8 3/8 1-1/4 C287 7/8 7/16 1-3/8 C /4 1-3/8 C /8 1-3/8 C /2 1-1/2 Page 23 Hickory Saw & Tool Fax

OUR CORE BUSINESS STRENGTHS

OUR CORE BUSINESS STRENGTHS Consistently reliable delivery of a proven service and product quality Union Grove Saw and Knife was founded in 1983 with a strong desire to become a regional tool company known