SC Spare parts list. Hydraulic steel cutter. SC 3600 s/n DEQ Construction Tools GmbH No

Transcription

1 SC 3600 Spare parts list Hydraulic steel cutter SC 3600 s/n DEQ Construction Tools GmbH No

2 General information This spare parts list applies to the following: Part number Description Hydraulic steel cutter SC 3600 Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! Instructions for ordering It is essential to indicate the serial number of the hydraulic attachment when ordering spare parts! Please note the full identification number of your hydraulic attachment. Determine the quantity of individual parts which are required and need to be ordered. The order must indicate the following details: full identification code of the hydraulic attachment required quantity part number description

3 Service, repair and wear part kits Kit list 1 Mechanical Housing part 1 3 Housing part 2 5 Cutter jaw 7 Hydraulic cylinder 9 Hydraulic hose connections 11 Tightening torques 13 Dimensions 15 Options / accessories Hydraulic hoses 16 Optional equipment 19

4 Service, repair and wear part kits Kit list Wed May 09 11:55:45 UTC

5 Item Part No. Name Qty L KIT Label kit 1 KIT Blade kit Cutter blade SCREW Guide blade Allen screw, M30 x 110 mm Washer Front blade Hexagon head bolt Allen screw, M30 x 90 mm Hexagon nut Washer Shim set 1 B Shim set 1 C Flat head socket bolt Cutter blade Flat head socket bolt Allen screw Nose blade Nose blade Washer Hexagon nut Seal kit (Hydraulic cylinder) Seal kit 1 D Seal kit 1 E Comments for Page: Kit list B for item 52 C for item 54 D for item 201 E for item 203 Wed May 09 11:55:46 UTC

6 Mechanical Housing part 1 Wed May 09 11:55:46 UTC

7 Item Part No. Name Qty L Housing Slide screw Kantseal Slide puck Pair of lock washers Allen screw Grease nipple Pair of lock washers Pair of lock washers Allen screw, M20 x 80 mm Allen screw Cap screw Nut O-ring Cap Flat head socket bolt Bearing bush Shim set (Pivot group) Thrust bearing 2 20 Main bolt 1 A Bearing bush Tie rod Lock Pair of lock washers Allen screw SCREW Flat head socket bolt Side cover Hexagon nut Bolt retainer Bolt Main cover Allen screw Bolt 1 Comments for Page: Housing part 1 A Not serviceable, consult the authorized Customer Center/Dealer in your area. Wed May 09 11:55:46 UTC

8 Mechanical Housing part 2 Wed May 09 11:55:47 UTC

9 Item Part No. Name Qty L Compensation plate 1 A Cutter blade SCREW Guide blade Compensation plate 1 A Compensation plate 1 A Allen screw, M30 x 110 mm Washer Guide blade seat Front blade Hexagon head bolt Allen screw, M30 x 90 mm Hexagon nut Washer Shim set 1 B Shim set 1 C Comments for Page: Housing part 2 A Serial number related, consult the authorized Customer Center/Dealer in your area. B for item 52 C for item 54 Wed May 09 11:55:47 UTC

10 Mechanical Cutter jaw Wed May 09 11:55:47 UTC

11 Item Part No. Name Qty L Cutter jaw 1 A Flat head socket bolt Cutter blade Flat head socket bolt Allen screw Nose blade Nose blade Washer Hexagon nut Bearing bush 1 Comments for Page: Cutter jaw A Cutter jaw must be aligned at factory. Consult the authorized Customer Center/Dealer in your area. Wed May 09 11:55:47 UTC

12 Mechanical Hydraulic cylinder Wed May 09 11:55:48 UTC

13 Item Part No. Name Qty L Counterbalance valve Hydraulic cylinder Check valve Allen screw, M20 x 70 mm Pair of lock washers Support plate Port block Seal Glide bush Hydraulic hose 1 A Hydraulic hose 1 B Hydraulic hose SCREW Pair of lock washers Flange half Flange half Seal kit (Hydraulic cylinder) Seal Seal kit 1 D Seal kit 1 E Comments for Page: Hydraulic cylinder A CR - Steel cutter jaw open B CB - Steel cutter jaw close D for item 201 E for item 203 Wed May 09 11:55:48 UTC

14 Mechanical Hydraulic hose connections Wed May 09 11:55:48 UTC

15 Item Part No. Name Qty L Portblock Allen screw Washer Blind flange Flange half Seal SCREW Pair of lock washers Blind flange Flange half Seal Pair of lock washers SCREW Intermediate plate HEXAGON SCREW Washer 28 Wed May 09 11:55:48 UTC

16 Mechanical Tightening torques Wed May 09 11:55:48 UTC

17 Item Part No. Name Qty L 6 - Allen screw Nm (111 ft lbf) 7 - Grease nipple - 18 Nm (13 ft lbf) 10 - Allen screw Nm (531 ft lbf) 11 - Allen screw - 87 Nm (64 ft lbf) 12 - Allen screw Nm (111 ft lbf) 16 - Flat head socket bolt Nm (96 ft lbf) 25 - Allen screw Nm (159 ft lbf) 26 - Allen screw Nm (531 ft lbf) 27 - Flat head socket bolt - 87 Nm (64 ft lbf) 33 - Allen screw Nm (159 ft lbf) 53 - Allen screw Nm (782 ft lbf) 57 - Allen screw Nm (1844 ft lbf) 61 - Hexagon head bolt Nm (915 ft-lbf) 62 - Allen screw Nm (1844 ft lbf) 63 - Hexagon nut Nm (782 ft lbf) Flat head socket bolt Nm (782 ft lbf) Flat head socket bolt Nm (782 ft lbf) Allen screw Nm (1165 ft lbf) A Hexagon nut Nm (782 ft lbf) Allen screw Nm (531 ft lbf) Allen screw Nm (273 ft lbf) Allen screw Nm (317 ft lbf) Allen screw Nm (273 ft lbf) Allen screw Nm (177 ft lbf) Hexagon head bolt Nm (457 ft lbf) Comments for Page: Tightening torques A Recommended to use copper grease Wed May 09 11:55:49 UTC

18 Mechanical Dimensions Wed May 09 11:55:49 UTC

19 This page intentionally left blank Wed May 09 11:55:49 UTC

20 Options / accessories Hydraulic hoses Wed May 09 11:55:49 UTC

21 Item Part No. Name Qty L Hydraulic Hose, I.D. 32 (1.26 in.) flange SAE /4 in PSI,, 1 5/8 in. JIC, length 2800 mm (110 in.) 2 Wed May 09 11:55:49 UTC

22 Options / accessories Optional equipment Wed May 09 11:55:49 UTC

23 Item Part No. Name Qty L Cutter grease cartridge, 12 x 400 g (0.88 lbs) Grease / 12 cartridges / 12 Kart. 1 A LUBRICAT.GUN Maintenance box Adapter plate matching the carrier. Consult the authorized Customer Center/Dealer in your area Base plate with threaded inserts Bolt kit Base plate with through borings Bolt kit Allen key (27 mm) 1 Comments for Page: Optional equipment A PARLUBE, 12 x 400 g cartridges, fully synthetic, for temperatures up to 200 C / 392 F Wed May 09 11:55:49 UTC

24 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. epiroc.com