OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO. 60 Inch Seeder. Product Number Starting Serial Number H00801 PATENT PENDING
|
|
|
- Christian James
- 5 years ago
- Views:
Transcription
1 0 Inch Seeder OPERATOR S MANUAL MAINTENANCE MANUAL PARTS LIST TURFCO 0 Inch Seeder Product Number 0 Starting Serial Number H000 PATENT PENDING Manual Number DANGER - IF INCORRECTLY USED THIS MACHINE CAN CAUSE SEVERE INJURY. THOSE WHO USE AND MAINTAIN THIS MACHINE SHOULD BE TRAINED IN ITS PROPER USE, WARNED OF ITS DANGERS, AND SHOULD READ THE ENTIRE MANUAL BEFORE ATTEMPTING TO SET-UP, OPERATE OR SERVICE THE MACHINE. TURFCO MFG. INC. st. Avenue NE Minneapolis, MN -0 USA Phone () -00 FAX () Turfco Mfg., Inc.
2 PARTS LISTS Guards, Shields and Storage Wheels PL0-0
3 PARTS LISTS Guards, Shields and Storage Wheels Item Part Description Qty. No. No. 0 Wheel Caster Wheel and Tire Assembly... 0 Spacer... 0 Axle, Caster Wheel... 0 Washer, Flat, / ID x -/ OD x / Thick Pin, Cotter, / x... 0 Gauge, Wheel... Pin, Wheel Retainer Pin, Hair,. Wire x -/ Long... Bolt, Carriage, / - x /... Nut, Hex, / - Flexloc... Cover, Upper Side Panel, Right Hand... Cover, Upper Side Panel, Left Hand... 0 Washer, Flat, / ID x / OD x / Thick Screw, Hex Head, / -0 x /... Cover, Side, Left Hand... Cover, Side, Right Hand... Panel, Front Cover, Right Hand... Panel, Front Cover, Left Hand Nut, / -0 U-Type... Screw, T-Handle Knob, / Handle, Cover... Bolt, Carriage, / -0 x /... 0 Nut, Hex, / -0 Flexloc... Flex Link... 0 Screw, Hex Head, / - x -/ Washer, Flat, / ID x -/ OD / Thick... Pin, Hitch, Includes Hair Pin Cotter... Pin, Lower Link Arm... 0 Pin, Lynch... Guard, PTO Shaft...
4 PARTS LISTS PTO, Gearbox and Drive Shafts PL0-0 TRACTOR END PTO SHAFT SERVICE PARTS 0 SEEDER END
5 PARTS LISTS PTO, Gearbox and Drive Shafts Item Part Description Qty. No. No. Gearbox, Right Angle... Coupling, Includes Screws Screw, Socket Head, / - x /... Shaft, Drive... Key, Square, / x -/... Key, Square, / x -/... Bearing... Screw, Set, / - x / Screw, Hex Head, / -0 x -/... Nut, Hex, / -0 Flexloc... Sprocket, 0B... Screw, Set, / - x / Screw, Hex Head, / - x... Washer, Lock, /... PTO Drive Shaft... 0 Yoke (Seeder End)... Bearing Kit, Includes Cross... Yoke and Shaft... Guard Repair Kit... 0 Guard, Outer... Guard, Inner... Yoke and Tube... Spring-Lok Repair Kit (Tractor End Yoke)... Spring-Loc Yoke Assembly (Tractor End Yoke)...
6 PARTS LISTS Cutting Head Assembly (SEE NOTE B) (SEE NOTE A) BLADE REEL ASSEMBLY 0 FINISHING WHEEL ASSEMBLY 0 0 PL0-0
7 PARTS LISTS Cutting Head Assembly Item Part Description Qty. No. No. Frame, Blade Support... 0 Top Cap, Bearing (See Note A)... Screw, Hex Head, / - x -/ (See Note B)... Washer, Lock, /... Box, Seed Distribution... 0 Bolt, Carriage, / - x / Washer, Flat, / SAE... 0 Nut, Hex, / - Flexloc... 0 Cover, Plexiglas... 0 Washer, Flat, / ID x / OD x / Thick... Wing Nut, / -... Plate, Finger Support... Plate, Depth... Pivot, Depth Adjuster Screw, Hex Head, / -0 x... 0 Nut, Hex, / -0 Flexloc Screw, Hex Head, / -0 x -/... 0 Washer, Flat, / SAE... Tube, Spacer... 0 Nut, Hex, / -0 Flexloc... Clamp, Handle... Washer, Lock, / Screw, Hex Head, / -- x /... Indicator, Depth Gauge Screw, Hex Head, / -0 x -/... Nut, Depth Adjustment Lock Screw, Hex Head, / - x -/... Spacer Washer, Flat, / SAE... 0 Nut, Hex, / - Flexloc Screw, Hex Head, / -0 x... Tube, Spacer... 0 Washer, Flat, / ID x -/ OD x / Thick... 0 Skid, Seed Distribution Box Screw, Hex Head, / - x... NOTE A: Do Not Mix Or Exchange Caps From One Side To Other Side Or To Other Cutting Head Assemblies. Caps are matched with Bottoms. NOTE B: Torque Screws To To 00 Inch Pounds ( to. ft/lbs - 0. to. newton meters)
8 PARTS LISTS Blade Assembly PL0-0 Item Part Description Qty. No. No. 0 Axle Blade, Point Offset ( each)... Sprocket, Drive... 0 Bushing... Bearing... Bearing Assembly, Includes Bearing and Bushing... Spacer, Plastic... Plate, End Cap... Washer, Lock, / Screw, Hex Head, / - x -/...
9 PARTS LISTS Finishing Wheel Assembly PL0-0 Item Part Description Qty. No. No. Frame, Finishing Wheel Arm... Rod, Finishing Wheel Axle Screw, Hex Head, / - x /... Washer, Lock, / Washer, Flat, / ID x OD x / Thick... Disc, Finishing Wheel... Spacer,... Spacer, End, Finishing Wheel... Spacer, Center, Finishing Wheel... Scrapper... Bolt, Carriage, / -0 x /... 0 Washer, Flat, / ID x / OD x / Thick... 0 Nut, Hex, / -0 Flexloc...
10 PARTS LISTS CUTTING HEAD ASSEMBLIES PL0- Cutter Head Drive Shafts
11 PARTS LISTS Cutter Head Drive Shafts Item Part Description Qty. No. No. Shaft, Jack, Cutter Head Drive, Left Hand... Shaft, Jack, Cutter Head Drive, Right Hand... Bearing, Bolt... Screw, Set, / - x / Screw, Hex Head, / -0 x -/... Nut, Hex, / -0 Flexloc... Key, Square, / x -/... Sprocket, 0B... Screw, Set, / - x /... Bearing, Flange, Includes Set Screws and Flangettes... 0 Screw, Set, / - x /... 0 Bolt, Carriage, / - x -/ Short Neck... Nut, Hex, / - Flexloc... 0 Sprocket, 0B... Coupling, Split, Includes Socket Head Screws Screw, Socket Head, / - x /... Chain, RC-0 x Pitch, Includes Master Link Link, Master, RC-0...
12 PARTS LISTS Down Pressure Assembly PL0-0 Item Part Description Qty. No. No. T-Handle... Bar, Hold Down Jam Nut Screw, Hex Head, / -0 x /... End Cap, Threaded... 0 Spacer, Upper Spring Gauge... Spring, Compression... Tube, Hold Down... 0 Nut, Hex, / -0 Flexloc... Spacer, Lower Spring Stop... Nut, Hex, / - Jam... End Cap... Connecting Rod... Bushing... 0 Washer, Flat, / SAE Screw, Hex Head, / -0 x Screw, Hex Head, / -0 x... Nut, Hex, / -0 Flexloc...
13 PARTS LISTS Front Rollers and Roller Scrapers PL0-0 Item Part Description Qty. No. No. 0 Roller, Front... Bearing, Flange... 0 Screw, Set, / - x /... 0 Bolt, Carriage, / - x -/ Short Neck... Nut, Hex, / - Flexloc... Key, Square, / x -/ Long... Sprocket, B... Screw, Set, / - x /... Scraper, Front Roller... Angle, Scraper Holder, Right Hand... Angle, Scraper Holder, Left Hand Screw, Hex Head, / -0 x /... 0 Washer, Flat, / ID x / OD x / Thick... 0 Nut, Hex, / -0 Flexloc...
14 PARTS LISTS Chains and Chain Idlers PTO DRIVE SHAFT SPROCKET CUTTER DRIVE IDLER SPROCKET LEFT SIDE CHAINS CUTTER HEAD DRIVE SPROCKET SEEDER BOX SPROCKET SEEDER DRIVE CHAIN IDLER SPROCKETS FRONT ROLLER SEEDER DRIVE SPROCKET RIGHT SIDE CHAINS PL0-
15 PARTS LISTS Chains and Chain Idlers PL0- Item Part Description Qty. No. No. Chain, RC-0 x Pitch, Includes Master Link and Half Link... 0 Link, Master, RC Link, Half, RC-0... Chain, RC- x Pitch, Includes Master Link... Link, Master, RC-... Sprocket, 0B... Screw, Shoulder, / -0 Special... Fitting, Lube, Straight, / Washer, Flat, / ID x -/ OD x / Thick... Nut, Hex, / -0 Flexloc... Screw, Hex Head, / - x -/... 0 Washer, Flat, / ID x / OD x / Thick... Sprocket, Idler, Tooth, RC-... Spacer... Washer, Flat, / ID x / OD x / Thick... Nut, Hex, / - Flexloc...
16 PARTS LISTS Seed Box 0 0 PL0-
17 PARTS LISTS Seed Box Item Part Description Qty. No. No. Sprocket, B... Screw, Set, / - x /... Sleeve... Pin, Spring, / x... Key, Square, / x /... 0 Bearing, Flange, Oilite... End Cap, Seed Box Bearing... 0 Nut, Hex, / -0 Flexloc Screw, Hex Head, / -0 x /... 0 Washer, Flat, / ID x / OD x / Thick... Angle Support, Seed Box, Right Hand... Angle Support, Seed Box, Left Hand... Nut, Hex, / - Flexloc... Bolt, Carriage, / - x / Screw, Hex Head, / - x /... Washer, Lock, /... 0 Nut, Hex, / Seed Box, Includes Box and Cover, Without Seed Gate... 0 Seed Box, Without Cover and Seed Gate... 0 Cover, Seed Box... 0 Screw, Hex Head, / -0 x... Seed Gate, Bottom and Slide... 0 Rotor Bar, Rubber, Includes Hex Journal... 0 Gasket... 0 Bearing, End... Gauge, Seed Dial Cam... Tube, Clear Vinyl,? ID x Long... Tube, Manual (Tube and Cap)... 0 Clamp, Loop... 0 Screw, Hex Head, / -0 X / Whizlock... Nut, Hex, / -0 Whizlock...
18 PARTS LISTS Decals - OPERATOR AND PARTS MANUAL PL0-0
19 PARTS LISTS Decals Item Part Description Qty. No. No. 0 Decal, Turfco Logo,, Green and Almond... Decal Sheet, Product Identification, TriWave Seeder, Includes Items Thru... Decal, Turfco Logo,, Green and Almond... Decal, TriWave Logo,... Decal, TriWave Logo,... Decal Sheet, Warnings and Controls, PTO Seeder, Includes Items Thru... Decal, Hand Hazard Warning... Decal, Foot Hazard Warning... Decal, PTO Length Warning... Decal, PTO Hazard Warning... Decal, Storage Only Warning... Decal, Down Pressure Scale... Decal, Depth Setting Scale... Decal, Pointer, Depth Setting Scale... Decal, Grease Fitting, PTO Shaft and Idler Sprockets... Decal, Grease Fitting, Drive Shaft Bearings... Decal, Read Manual Warning... Decal, Product Identification... Manual, Operator and Parts Lists, TriWave Seeder...
20 PARTS LISTS SERVICE RECORDS DATE 0SVrecords
21 PARTS LISTS NOTES 0SVnotes
22 TURFCO MFG. INC. st Avenue NE Minneapolis, Minnesota USA -0 Phone --00 FAX --0 Internet service@turfco.com Manual Number. 0 Seeder Printed in USA Product Number 0 0
HR24TS Rotary Rake. Serial Numbers less than Illustrated Parts Breakdown. Curtain & Guards, Front
HRTS Rotary Rake Serial Numbers less than 00 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Page Tongue Front Frame Front Axle Curtain & Guards, Front Front Pivot Bridge
W & A PARTS MANUAL PTO POWER DITCHER FOR CAT. II OR III STANDARD & QUICK HITCH. Model No RPM Model No.
W & A PARTS MANUAL PTO POWER DITCHER FOR CAT. II OR III STANDARD & QUICK HITCH Model No. 360 -- 540 RPM Model No. 370 -- 1,000 RPM SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY
FRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
COMMERCIAL MOWERS PARTS MANUAL FOR: MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251
PARTS MANUAL FOR: COMMERCIAL MOWERS MODELS: ZKH52221 ZKH52251 ZKH61221 ZKH61251 FD KEES POWER EQUIPMENT, L.L.C. 700-800 PARK AVENUE BEATRICE, NEBRASKA, U.S.A. 68310 PRINTED IN USA MANUAL NO.-102935 REV.
Parts Manual for: MODELS / I.D. : / ZTH5223A / ZTH5225A / ZTH6125A
Parts Manual for: MODELS / I.D. : 968999153 / ZTH5223A 968999154 / ZTH5225A 969999155 / ZTH6125A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252
Parts Manual for MODELS: ZKH52222 ZKH52252 ZKH61252 Professional Quality Lawn Care Equipment since 1945 THIS MANUAL INCLUDES UPDATES ON PAGES 6,10, & 20. Yazoo/Kees Power Equipment policy is to improve
Hydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Turf Equipment MODEL 20HP Enforcer 44 22HP Enforcer 48 23HP Enforcer 54 ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly..................................
Parts Manual. English
Parts Manual WHF4817 / 966947005 WHF3617 / 966947008 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. English 2009 HTC. All rights reserved.
Parts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &
Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing
32 FRONT DECK ASSEMBLY
3 6 K 2 0 PARTS MANUAL 32 FRONT DECK ASSEMBLY 3 1 2 Belt Shield Prior to SN 33333 4 6 21 22 7 24 2 26 14 8 13 12 9 10 11 27 2 28 1 16 2 19 17 30 36 39 39 37 29 60 62 61 3 9 49 41 40 28 48 42 13 43 44 47
ATTACHMENT APPLICATION CHART
R Ingersoll RM42Y2, RM44YR2 MOWERS SB38Y2 SNOWCASTER UB38Y2 UTILITY BLADE BG42Y2 BAGGER Parts Catalog 8-3280 INDEX PAINT GENERAL INFO 2014 Tractor with RM42Y2 Mower and BG42Y2 Bagger ATTACHMENT APPLICATION
Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
MMZ jr Hydrostatic Zero-Turn Riding Mower
MMZ jr. Hydrostatic Zero-Turn Riding Mower MODEL ABM HP " Stamped Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS " Cutter Deck............................. and " Spindle Assembly.........................
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
Walk-Behind Lawn Mowers
Walk-Behind Lawn Mowers Parts Manual Models 2 - PRO21SCH 12 - LM21 1 - LM21S 1 - LM21SW 1 - LM21S 11 - PRO21SCH 0 - LM21SW - LM21S - LM21SW 5 - LM21S - LM21SW 0700 /0 Printed in USA THE MANUAL Before you
PARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
HYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
Parts Manual RZ4623 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4623 / 967009801 Please
Title: QUIK PARTS Heading: DECKS Model: Year: 2010 Assembly: BLADE SPINDLE ASSEMBLY
Assembly: BLADE SPINDLE ASSEMBLY Assembly: BLADE SPINDLE ASSEMBLY PARTS LIST 1 623762 SPINDLE ASSY 2 623763 SPINDLE ASSY 3 243331 HEX BOLT 4 257041 WASHER - CUPPED 5 721167 SHIELD - BEARING 6 110081 BEARING
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
Illustrated Pats List
Illustrated Pats List Automatic Lawn Tractor Models 0 0 0 Model 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine and should
SRX-2000 PARTS LIST. SRX SRX E Revision 100. Manual Part# PM
www.mkdiamond.com SRX-000 Early Entry Concrete Saw PARTS LIST MODELS p/n SRX-000 7 SRX-000 7-E Revision 00 0.008 Manual Part# 7-PM Caution: Read all safety and operating instructions before using this
HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog INDEX HOME TRACTOR ATTACHMENTS APPLICATION CHART
R Ingersoll HYDRAULIC MOWER AHRM4H, HRM48H Parts Catalog 8-3091 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO INDEX Deck. Belt and Idler Pulley...5 Mounting Bracket...7 Rear Wheels...7 Hydraulic Drive...9-13
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
Rotary Mower L47, M47, N47, RM44YR Parts Catalog
R Ingersoll Rotary Mower L47, M47, N47, RM44YR Parts Catalog 8-2711 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Axle... 9 Bearings, Spindles... 11-13 Belts... 5-7 Blades... 11-13 Bracket,
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
ECOLAWN APPLICATOR PARTS LIST. Model ECO-100. Rev
ECOLAWN APPLICATOR PARTS LIST Rev. 04-09- -- Sub-Assemblies Diagram 9 0 5 5 8 7 4 6 4 A-000 MAIN FRAME A-000 STEERING COLUMN ASSEMBLY A-000 MAIN DRIVE SHAFT ASSEMBLY 4 A-0004 DIFFERENTIAL ASSEMBLY 5 A-0005
Illustrated Parts List
Illustrated Parts List Rear Tine Tiller Model Series 0 Thru Model Series 0 Shown IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY Warning: This unit is equipped with an internal combustion engine
Illustrated Parts List I Snow Thrower. 42 Inch Two Stage (LST42C) Repair Parts Manual
Illustrated Parts List 2008-01 I0807215 Snow Thrower 42 Inch Two Stage (LST42C) Repair Parts Manual owners manual Model No. LST42C 42" SNOW THROWER CAUTION: Read Rules for Safe Operation and Instructions
Section E SWEEP WAGON
Section E SWEEP WAGON 1E 2E Index No. Part No. Description 1. 47-042058-002 Sweep Wagon Frame with Leaf Springs N.A. Sweep Wagon Frame without Leaf Springs 2. 47-041769-003 Sweep Board Only (brown for
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
ELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service:
ELSTON Gopher Getters Parts List for GA-00 and GA-00 Another Quality Product of: Please Contact Us for Parts and Service: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
Illustrated Parts Manual
Illustrated Parts Manual Mustang Series RZT TROY-BILT LLC, P.O. BOX CLEVELAND, OHIO -00 Printed In USA Form No. -0 (December, 0) To The Owner Thank You Thank you for purchasing an MTD Zero-Turn Tractor.
MANUFACTURING INC. 706 N
ELSTON Gopher Getters Parts List for GA-00 & GA-00 Please Contact Us for Parts and Service: Another Quality Product of: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
Parts Manual SPEEDZTR 42 / SPEEDZTR 42BF / SPEEDZTR 46BF / SPEEDZTR 48BF / SPEEDZTR 54BF /
Parts Manual SPEEDZTR 42 / 6603801 SPEEDZTR 42BF / 66054201 SPEEDZTR 46BF / 658831 SPEEDZTR 48BF / 65883501 SPEEDZTR 54BF / 65883201 Please read the operator s manual carefully and make sure you understand
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
DIAMOND. MODEL: WS25 (December, 2006) FLUSH CUT WIRE SAW PARTS LIST P R O D U C T S. Part #
DIAMOND P R O D U C T S FLUSH CUT WIRE SAW PARTS LIST MODEL: WS5 (December, 00) Part #0 Intentionally Blank Table of Contents Description Page No. Saw Component Assembly....-5 Frame Assembly Wire Drive
ST927E Spare Parts
ST927E 1.1997 Spare Parts ELECTRIC START ASSEMBLY 8 9 7 6 ENGINE 6 601 00 15-88 MOTOR, STARTER 7 601 00 15-89 SCREW, 1/4-20X.50 8 601 00 15-90 SCREW, #6-32X2.50 9 601 00 15-91 CORD, STARTER 10 601 00 21-61
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
Parts Manual. Ultra 52 / Ultra 52 BF / Ultra 61 / Ultra 61BF /
Parts Manual Ultra 52 / 966690601 Ultra 52 BF / 966690602 Ultra 61 / 966611801 Ultra 61BF / 966611802 Please read the operator s manual carefully and make sure you understand the instructions before using
Commercial Reel Mower
Commercial Reel Mower Parts Manual Models 00 CL- -Inch Kohler 0 CL- -Inch Honda 0 CL-0 0-Inch Kohler 0 CL-0 0-Inch Honda Gasoline containing up to 0% ethanol (E0) or up to 0% MTBE (methyl tertiary butyl
MANUAL REV. 03 (11/26/01)
Parts Manual MANUAL 539105906 REV. 03 (11/26/01) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185
00278 R1 AXLE, FOR 1-1/8" FREE WHEEL HUBS
00 ACTUATOR VALVE, O-RING PORTS 00 C-CLIP, /" 00 SPRING, VALVE SPOOL RETURN 00 COLLAR, / ID 00 WASHER, / USS, ZINC 00 HH CAP SCREW, /- NC X -/ G ZINC 0 FITTING, 0-- 00 O-RING, - FITTING 000-BO RELIEF VALVE,
/ iz4218kaa / iz4818kaa / iz4821kaa / iz5223kaa / iz5223koa MANUAL NO REV.
Parts manual Models: 6804 / iz418kaa 6805 / iz4818kaa 6806 / iz481kaa 6807 / iz53kaa 6808 / iz53koa MANUAL NO. 531070 REV. 05 (08/18/04) MODEL NUMBER SERIAL NUMBER DATE PURCHASED DEALER ADDRESS NOTES:
INDEX. 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts Pulleys, Blades, Belts, Spindles and Attaching Parts...
R Ingersoll HOME TRACTORS 52SD, 62SD and 72SD INDEX 52SD Mower Deck Shell, Pulley Covers, Gauge Wheels and Attaching Parts... 3 Pulleys, Blades, Belts, Spindles and Attaching Parts... 5 62SD Mower Deck
CONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring
APPLICATOR ECOLAWN PARTS LIST
APPLICATOR ECOLAWN PARTS LIST Rev. 06-0-0 Sub-Assemblies Diagram 3 8 4 5 6 7 ITEM NO. ASSEMBLY DESCRIPTION REFERENCE SHEET HOPPER ASSEMBLY MOTOR ASSEMBLY 3 3 FEED TRAP ASSEMBLY 4 4 CONVEYOR ASSEMBLY 5
Section A Gear Box September A
Section A Gear Box September 06 1A Index 1. 1-10016-000 Gear Box Oil Pan. 1-100486-000 Clutch Lever Assembly, See Page 9A for breakdown. 1-1004-000 Clutch Cam, for all A machines prior to Serial #5 1-104-000
Parts Manual SPDZTR 42 / SPDZTR 42 BF /
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to
Parts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Parts Manual SPEEDZTR 44 / SPEEDZTR 46 / SPEEDZTR 54 / SPEEDZTR 36 / SPEEDZTR 44 / SPEEDZTR 48 /
Parts Manual SPEEDZTR / 6501 SPEEDZTR 6 / 65001 SPEEDZTR 5 / 651 SPEEDZTR 36 / 6501 SPEEDZTR / 65301 SPEEDZTR / 6501 Please read the operator s manual carefully and make sure you understand the instructions
Parts Manual. Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual SPDZTR 42 / 966657601 SPDZTR 42 BF / 966657701 SPDZTR 46 / 966657801 SPDZTR 42 CA / 966657901 SPDZTR 46 BF / 966658001 SPDZTR 48 / 966698601 SPDZTR 54 / 966658201 SPDZTR 54 / 966658301 SPDZTR
DIAMOND MODEL CC1900 EARLY ENTRY CONCRETE SAW PARTS LIST P R O D U C T S. (March 2012) Part #
DIAMOND P R O D U C T S EARLY ENTRY CONCRETE SAW PARTS LIST MODEL CC1900 (March 2012) Part #1801617 (Intentionally Blank) TABLE OF CONTENTS Description Page No. Frame Assembly....4-5 Engine Assembly......6
ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL REV.
Parts Manual Models ZVKH52230 ZVKH61250 ZVKE61260 ZVKH61270 ZVKE72260 ZVKH72270 ZVKHL61230 ZVKW52250 ZVKW61230 ZVKW61250 MANUAL 106149 REV. 04 (10/09/02) Model Number: Serial Number: Date of Purchase:
Sno-Thro. Parts Manual
Sno-Thro Parts Manual Models 00 - STDLE 00 - ST7LE 00 - ST0DLE 007 - STLET 00 - ST7LET 00 - ST0LET 00 - STE 0 - ST07LE 0 - STLET 0 - ST07LET 000 /0 Printed in USA THE MANUAL Before you operate your unit,
MANUAL REV. 09 (04/20/06)
Parts Manual MANUAL 539105906 REV. 09 (04/20/06) Models: 968999175 / ZTH7226KOA 968999180 / ZTH5221KAA 968999181 / ZTH5223KAA 968999182 / ZTH5223KOA 968999183 / ZTH5223KOLA 968999184 / ZTH5225KOA 968999185
Parts Manual for: MODELS / I.D. : 968999150 / ZTH4217A Husqvarna policy is to improve its products whenever it is possible and practical to do so. In an effort to keep pace with changes in technology,
ST1014 PARTS ST1014 Headstock Breakdown
ST1014 PARTS ST1014 Headstock Breakdown 112 114 23 104 105 108 102 106 20 19 21 22 101 100 103 111 38 14 15 37 46 44 47 45 107 93 39 41 40 67 110 109 74 75 76 11 12 13 9 8 6 10 31-2 31-3 3 2 7 26 24 31-1
2008 HTC. All rights reserved. Beatrice, NE. Printed in U.S.A.
Parts Manual LZ22 / 9687901 LZ227 / 968999674 LZ60 / 96899967 LZ7230 / 968999676 LZ6127 / 968999709 Please read the operator s manual carefully and make sure you understand the instructions before using
3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT Monosem Inc.
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 7" x 7" Twin-Row Frame, Rigid For 4 x 2 row Frames The Twin-row frames are rigid and
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
CAPX Installation Print 4/10/ CAB ASSEMBLY Part Pos Description Quantity Foot Notes CAB SECTION PLATE, MO
CAPX Installation Print 4/10/2019 6245100014 CAB ASSEMBLY Part Pos Description Quantity Foot Notes 6245100008 1 CAB SECTION 1 + 6705100023 2 PLATE, MOUNTING 1 6705012439 3 PLATE, MOUNTING 1 6326100000
W & A PARTS MANUAL STACKER BUSTER LEVEL BANDER. Model No Quality Products from W & A MANUFACTURING COMPANY
W & A PARTS MANUAL 12 ROW @ 38 STACKER BUSTER LEVEL BANDER Model No. 3668 SPECIALIZED FARM EQUIPMENT Quality Products from W & A MANUFACTURING COMPANY P.O. Box 5238, Pine Bluff, Arkansas 71611 Phone: (870)
OWNERS MANUAL. Model No LB. POLY PRO SPIKER/SPREADER. CAUTION: Read Rules for Safe Operation and Instructions Carefully
OWNERS MANUAL Model No. -0301 CAUTION: Read Rules for Safe Operation and Instructions Carefully 17 LB. POLY PRO SPIKER/SPREADER Safety Assembly Operation Maintenance Parts PRINTED IN U.S.A. FORM NO. 78
Parts List for Type 1
1 422190430001 FENCE BODY 1 2 901010600677 CAP SCREW 2 3 904010331451 WASHER 3 4 901010600605 CAP SCREW 2 5 904010101604S STEEL WASHER 2 6 422040105002 REAR SLIDE BLOCK 1 7 905040714459 STEEL PIN 1 8 928010414118
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL SNO-WAY SPREADERS 4 CUBIC FOOT 6 CUBIC FOOT & 9 CUBIC FOOT 01 Sno-Way International 91019B TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... HOPPER FRAME - 4 CUBIC FOOT (For Serial
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
SECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
/ ZTH5225KAA / ZTH6125KAA / ZTH6123KOLA / ZTH6127KOB / ZTH7227KOB For Serial No & Higher
Parts Manual Models: 968999185 / ZTH5225KAA 968999186 / ZTH6125KAA 968999189 / ZTH6123KOLA 968999224 / ZTH6127KOB 968999225 / ZTH7227KOB For Serial No. 033600000 & Higher MANUAL 539109201 REV. 01 (09/15/04)
DIAMOND MODEL CC1300-XL P R O D U C T S CONCRETE SAW PARTS LIST. March Part#:
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC1300-XL March 2007 Part#: 1800666 Intentionally Blank Table of Contents Description Page No. Frame Group....4-7 Engine Group 9 Horsepower Gas. 8
Parts Manual Ram Ultra 52, 25 KOH / Ram Ultra 61, 25 KOH / Ram Ultra 72, 27 KOH / Ram Ultra 52, 25 KOH BF /
Parts Manual Ram Ultra 52, 25 KOH / 998501 Ram Ultra 1, 25 KOH / 9985401 Ram Ultra 72, 27 KOH / 98999724 Ram Ultra 52, 25 KOH BF / 998502 Ram Ultra 1, 25 KOH BF / 9985402 Ram Ultra 72, 27 KOH BF / 9899977
Tow-Behind Spreader 125 lb Capacity
Tow-Behind Spreader 125 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Owners Manual #13696 13828 Rev. 07-149 SAFETY PRECAUTIONS 1. Always
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
HD38, HD58, HD78 REV
HD38, HD58, HD78 REV. 07.29.2014 COVER for HD38, HD58, HD78 5 P004868 1/4-20x3/4 Button Head Cap Screw Stainless Steel 2 6 P001450 Lockwasher - Internal Tooth.250 6 8 P005200 Wave Disc Washer 4 10 P004869
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
MODELS: CC3730TE / CC3740TE
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODELS: CC0TE / CC0TE February 00 Part #00 Table of Contents Pictorial Page Index....., Belt Guard Assembly... Controls Legend....... Belt Tensioner Assembly....
CONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CC00XL ELECTRIC & HYDRAULIC UNITS August, 0 Part # 0 Table of Contents Common Parts.. Front Axle Assembly... Rear Axle Assembly... Transmission Assembly... Blade Shaft Assembly
Parts Manual RZ4221 BF /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual RZ4221 BF / 9676101 Please
Di-Acro 18E Stylus Turret Punch Press
OPERATOR S MANUAL & INSTRUCTIONS Di-Acro E Stylus Turret Punch Press Di-Acro, Incorporated PO Box 00 Canton, Ohio Progress Street N.E. Canton, Ohio 0 0-- 0--00 (fax) Revised 0/0 Sale or distribution of
Tube-Line Baleliner 7800TX2
Tube-Line Baleliner 7800TX2 Parts Manual 29667 (13/04/12) 2 3 Frame Assembly 4 Frame Assembly Item Qty Part # Description 1 1 27298 E-Stop Button 2 8 28663 Outside Rail Pin 3 1 28805 Wire Shield 4 1 28823
SAVE THIS MANUAL FOR FUTURE REFERENCE. WARNING: To reduce the risk of
- ($ 0$$/ PP-,( /$( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP SAVE THIS MANUAL FOR FUTURE REFERENCE Printed in Taiwan
Table of Contents. Section H : Gauge Wheels & Mesh Roller. Section H. Call or Northwest Tillers today
Table of Contents Section H Section H : Gauge Wheels & Mesh Roller 6½ Gauge Wheel (SRB4098)... H1 9½ Gauge Wheel (SRB4099)... H2 6½ & 9½ Gauge Wheel Hubs... H3 Heavy Duty Gauge Wheel (SRB4070 & SRB4076)...
When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: Engine
Parts Manual EZC4824 / 658801 EZ4824K / 6588001 EZ4824 / 65880401 EZ5221 / 65880501 EZ5224 / 65880601 EZ5226 / 65201 EZ6124 / 65880701 Please read the operator s manual carefully and make sure you understand
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
PLOW ACCESSORIES PARTS MANUAL
RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: parts@rwfbron.com ACCESSORIES 2015 INDEX: PARTS & MAINTENANCE MANUAL
ACREAGE SEEDER / PLANTER OWNER S MANUAL
ACREAGE SEEDER / PLANTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
For Serial Nos. 510,000 & Higher
For Serial Nos. 510,000 & Higher Part No. 103-7405 EFFECTIVE DATE: September 1, 1995 Program EXMARK PARTS PLUS PROGRAM If your Exmark dealer does not have the Exmark part in stock, Exmark will get the
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog
R Ingersoll CHIPPER SHREDDER H524H, HS24W AHS24H, AHS24W Parts Catalog 8-3291 HOME TRACTORS ATTACHMENTS PAINT GENERAL INFO ALPHABETICAL Body, Hopper and Shredder Hammers...5 Chipper Assembly...7 Trailer
" Tiller Attachment (1993) Page 1 of 5 Chain Case Assembly
190-766-190 38" (1993) Page 1 of 5 Chain Case Assembly 190-766-190 38" (1993) Page 2 of 5 Chain Case Assembly 04991 1 Chain Case Assembly 1 05034 1 S Bearing Housing 1.375" Dia. 2 14895 1 S Housing Assembly
PARTS MANUAL. BX102S 3 PH Self-Feed Chipper. Serial Number 1102S00001 & up. Part Number: 1025T500
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, Ontario N0B 2M0 Canada www.wallensteinequipment.com PARTS MANUAL 3 PH Self-Feed Chipper Serial Number 1102S00001 & up Refer to the operators manual
APS Small Seeds Box Assembly Instructions
APS Small Seeds Box Assembly Instructions For APS15 Series All Purpose Seeder Manual No. 313-473M Before You Start! When you see this symbol, the subsequent instructions and warnings are serious - follow
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
CM-1258Y-SD Concrete Mixer
Form No. 3421-382 Rev A CM-1258Y-SD Concrete Mixer Model No. 68011 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-382* A Ordering Replacement Parts To order replacement
MODEL G0501 SLIDING TABLE SAW
MODEL G0501 SLIDING TABLE SAW MANUAL UPDATE The Sliding Table Saw has changed slightly from when the manual was originally written. We have improved the crosscut fence, extension tables, blade guard assembly,