no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
|
|
- Russell McCormick
- 5 years ago
- Views:
Transcription
1 Summer Promotion valid until all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable Precision slide calipers Reading accuracy 0.02 mm Precision dial slide caliper Reading accuracy 0.02 mm Precision electronic digital slide calipers Reading accuracy 0.01 mm no mm no mm no mm no mm no mm no mm no Precision marking vernier caliper Measuring range 200 mm Reading accuracy 0.05 mm no Dividers with scriber 150 mm no Protractor 150 mm no Precision measuring tool set no digital slide caliper 100 mm no Micrometer screw 0-25 mm no Square 100 x 70 mm Square wedge-shaped knife edges on the length side no x 70 mm no x 100 mm no Square Set no Square 100 x70 mm no Square 150x100 mm no Try square set 4 pieces 70 x 50, 95 x 60, 120 x 80 and 175 x 100 mm no Universal vernier protractor 300 mm rail length no Straight edge 200 mm rail length no Precision vernier depth gauge 200 mm, reading accuracy 0.05 mm no Precision digital vernier depth gauge 150 mm, reading accuracy 0.01 mm no Precision depth micrometer 100 mm, reading accuracy 0.01 mm Walter Blombach GmbH Remscheid - Am Blaffertsberg 13 Phone +49(0)2191/ Fax +49(0)2191/ info@wabeco-remscheid.de Internet
2 no Precision Micrometer screw reading accuracy 0.01 mm no mm no Telescopic gauge set 6 pieces , , 19-32, 32-54, 54-90, mm no Precision micrometer set 4 pieces and mm no Precision inside micrometer set 8 pieces mm, reading accuracy 0.01 mm no Holder for micrometer screws suitable for micrometer screws from mm no Two point inside micrometer set and mm reading accuracy 0.01 mm Two point inside micrometers reading accuracy 0.01 mm no Precision gauge block set 87 pieces no Precision v-block 32 x 25 x 75 mm adjustable no mm no mm Precision v-block pairs hardened v-blocks with clamping bracket PU: no Precision v-block pairs 1 v-block 44 x 41 x 35 mm 1 v-block 70 x 45 x 41 mm Precision v-block hardened v-block with clamping bracket PU: 1 piece no x 41 x 35 mm Clamping-Ø up to 30 mm no x 45 x 41 mm Clamping-Ø up to 43 mm no x 41 x 35 mm Clamping-Ø up to 30 mm no x 45 x 41 mm Clamping-Ø up to 43 mm no Machine level 200 mm, accuracy 0.02 mm/m no Edge finder with centering point clamping shank Ø 10 mm probe Ø 4 mm as well as conical no Center indicator with dial gauge clamping shank Ø 10 mm reading accuracy 0.01 mm no Frame level 200 mm, accuracy 0.02 mm/m no Edge finder clamping shank Ø 10 mm probe Ø 10 mm no Precision magnetic measuring stand with dial gauge no Measurement and test board 450 x 450 x 75 mm without measuring tools weight 53 kgs without measuring tools no Edge finder Set clamping shank Ø 10 and 12 mm probe Ø and 12 mm as well as conical no Precision magnetic measuring stand mechanical clamping
3 no Dial gauge measuring range 10 mm. clamping shank Ø 8 mm h6 no Precision dial test indicator measuring span 0.8 mm clamping shank Ø 6 and Ø 8 mm no Precision magnetic measuring stand with dial test indicator no Precision magnetic measuring stand set no magnetic measuring stand no dial gauge no dial test indicator no Precision marking and height gauge measuring height 300 mm no Digital precision marking and height gauge measuring height 300 mm reading accuracy 0.01 mm Digital position readout for 3 axes and optical scales Mountable digital vernier caliper for horizontal mounting no Digital position readout (DRO) for 3 axes no Optical scale Measuring length 100 mm no Optical scale Measuring length 170 mm no Optical scale Measuring length 270 mm no Optical scale Measuring length 320 mm no Optical scale Measuring length 520 mm Mountable digital vernier caliper for vertical mounting no Measuring length 100 mm no Measuring length 150 mm no Measuring length 200 mm no Measuring length 300 mm no Measuring length 400 mm no Measuring length 500 mm no Measuring length 100 mm no Measuring length 150 mm no Measuring length 200 mm no Measuring length 300 mm no Measuring length 400 mm no Measuring length 500 mm no Single axis position readout reading accuracy 0.01 mm connecting cable for Mini-USB port no axes position readout reading accuracy 0.01 mm 3 connecting cables for Mini-USB port no Power supply unit for no and no
4 Standard 3-jaw lathe chuck with turning and drilling jaws clamping key without flange Standard 4-jaw lathe chuck with turning and drilling jaws clamping key without flange Independent chucks with 4 stepped reverse-clamping jaws clamping key without flange no Ø 80 mm no Ø 100 mm no Ø 125 mm no Ø 160 mm no Ø 80 mm no Ø 100 mm no Ø 125 mm no Ø 160 mm no Ø 80 mm no Ø 100 mm no Ø 125 mm no Ø 160 mm jaw chuck MT2 with tightening thread M10. with turning and drilling jaws and clamping key no Ø 80 mm no Ø 100 mm no jaw lathe chuck set no jaw lathe chuck Ø 100 mm no soft unstepped jaws no jaw lathe chuck set no jaw lathe chuck Ø 125 mm no soft unstepped jaws ,96 no Dead center set no Dead center MT2 no Dead center MT Live centers hardened and ground no MT no MT no MT no Original Vertex Live center set MT2 8 pieces with interchangeable elements no Key-type drill chuck set no Key-type drill chuck no Drill chuck arbor MT Precision quick-action drill chuck inner taper B16 no mm no mm Quick-action drill chuck sets Quick-action drill chuck no Drill chuck arbor MT2 no mm no mm no Drill chuck arbor MT2 and tightening thread M10 outer taper B no Drill chuck arbor MT2 and flat tang outer taper B no Drill sleeve from MT3 to MT Quick-change tool post, main body no Size Aa no Size A Boring tool holder for turning tools up to max. cross section no mm Size Aa no mm Size A Turning tool holder for turning tools up to max. cross section no mm Size Aa no mm Size A
5 Parting tool holder no Size Aa no Size A no Parting blade Parting tool holder with parting blade blade thickness 1.5 mm - length 81.5 mm no Cross section 8x8 mm no Cross section 10x10 mm each no replacement blade Quick-change tool post and holder sets 1x Quick-change tool post, main body 1x Boring tool holder 1x Parting tool holder 1x Parting blade 1x Turning tool holder no Size Aa no Size A no Parting tool holder set no Parting tool holder with parting blade Cross section 8 x 8 mm no Parting blade Quick-change tool post and holder sets 1x Quick-change tool post, main body 1x Boring tool holder 3x Turning tool holder no Size Aa no Size A no Parting tool holder set no Parting tool holder with parting blade Cross section 10 x 10 mm no Parting blade no Parting tool holder Industrial Quality without parting insert cross section 10 x 10 mm no Parting inserts suitable for no width 2.2 mm PU: no Carbide tipped tool set 6 pieces cross section 10 x 10 mm Carbide tipped tool sets 10 pieces HSS turning tool sets 8 pieces Turning tool sets 7 pieces with indexable inserts and key Cross section Cross section no x8 mm no x10 mm no x12 mm no x16 mm no x20 mm no x4 mm no x6 mm no x8 mm no x10 mm no x12 mm no Cross section 8x8 mm no Cross section 10x10 mm no Carbide tipped indexable inserts suitable for no /10861 PU: 5 Pieces no Center drill set 4 pieces center drill with nominal Ø 1.00, 2.00, 2.50 and 5.00 mm Center drills no Ø 1 mm no Ø 2 mm no Ø 2.5 mm no Ø 5 mm no fold Knurling tool cross section 10 x 10 mm no Knurling tool cross section 12 x 12 mm no Knurling holder cross section 10 x 10 mm
6 no Precision combi shell end mill arbor set no Combi shell end mill arbor MT2x16 no Key no Precision combi shell end mill arbor set 7 pieces no Combi shell end mill arbor MT2x16 no Key no Arbor spacer set width: mm Arbor spacers bore Ø 16 mm suitable for combi shell end mill arbor with location hole 16 mm no Width 1 mm no Width 2 mm no Width 5 mm no Width 10 mm no Width 20 mm no Precision combi shell end mill arbor set 4 pieces no Combi shell end mill arbor MT2x16 no Key no Metal slitting saw 63 x 16 x 2.0 mm no Arbor spacer width 5 mm no Arbor spacer set width mm bore Ø 16 mm suitable for combi shell end mill arbor MT2 x no Precision combi shell end mill arbor set 6 pieces no Combi shell end mill arbor MT2x16 no Key no Shell end mill 40 x 16 x 20 mm no Arbor spacer width 2 mm no Arbor spacer width 5 mm no Arbor spacer width 10 mm no Precision combi shell end mill arbor set 4 pieces no Combi shell end mill arbor MT2x16 no Key no Shell end mill 40 x 16 x 40 mm no Arbor spacer width 5 mm no Precision combi shell end mill arbor set no Combi shell end mill arbor MT2x16 no Key no Side milling cutter 50 x 16 x 5.0 mm no Arbor spacer width 2 mm no Arbor spacer width 20 mm no Precision combi shell end mill arbor set no Combi shell end mill arbor MT2x16 no Key no Gear cutter set 50 x 16 mm module 1 no Arbor spacer width 5 mm no Arbor spacer width 20 mm Angle milling cutter HSS with longitudinal groove bore 16 mm, Ø 63 mm no mill angle no mill angle no Single angle milling cutter set suitable for combi shell end mill arbor MT2x16 no Single angle milling cutter 63 x mm no Arbor spacer width 5 mm no Arbor spacer width 10 mm no Shell end mill HSS with longitudinal and transverse groove bore 16 mm, Ø 40 mm width 40 mm roughing cutter with rough toothing Shell end mills HSS with longitudinal and transverse groove bore 16 mm, finishing cutter with fine toothing no Ø 40 mm Width 20 mm no Ø 35 mm Width 35 mm no Ø 40 mm Width 40 mm no Shell end mill set 4 pieces suitable for combi shell end mill arbor MT2x16 no Shell end mill 40 x 16 x 20 mm no Arbor spacer width 2 mm no Arbor spacer width 5 mm no Arbor spacer width 10 mm Side milling cutter HSS Ø 50 mm, bore 16 mm no Width 4 mm no Width 5 mm no Width 6 mm
7 Gear cutter set HSS bore 16 mm, Ø 50 mm each module consists of a set of 8 pieces no Module no Module no Module no Metal slitting saw set HSS no Metal slitting saw no Metal slitting saw no Metal slitting saw set HSS 4 pieces location shank Ø12 mm 3 Metal slitting saws 1x 63 x 16 x 1.0 mm 1x 45 x 16 x 1.5 mm 1x 45 x 16 x 2.0 mm no Metal slitting saw set suitable for combi shell end mill arbor MT2x16 no Metal slitting saw 63 x 16 x 1.0 mm no Arbor spacer width 5 mm no Arbor spacer width 20 mm Metal slitting saws HSS with lateral clearance bore 16 mm outer Ø 63 mm no Width 1 mm no Width 2 mm no Face mill Outer-Ø 40 mm location hole-ø 16 mm with carbide indexable inserts no Milling cutter 90 with morse taper MT 2 with indexable inserts no Collet chuck set MT2 no collet chuck MT2 no key no Collet sets 16 pieces Collet chuck MT2 tightening thread M10 Key 14 Collets Ø 3-16 mm Morse taper sleeves MT2 tightening thread M10 no Ø 1 mm no Ø 8 mm no Ø 2 mm no Ø 9 mm no Ø 3 mm no Ø 10 mm no Ø 4 mm no Ø 11 mm no Ø 5 mm no Ø 12 mm no Ø 6 mm no Ø 13 mm no Ø 7 mm 9.50 each no TITAN slotting mill set (2 flutes) short 11 pieces no End mill set (4 flutes) Solid carbide, Collets in accordance with DIN 415E OZ no Ø 2 mm no Ø 2.5 mm no Ø 3 mm no Ø 10 mm no Ø 4 mm no Ø 11 mm no Ø 5 mm no Ø 12 mm no Ø 6 mm no Ø 13 mm no Ø 7 mm no Ø 14 mm no Ø 8 mm no Ø 15 mm no Ø 9 mm no Ø 16 mm each no Slotting mill set (2 flutes) Solid carbide no TITAN coated mill set 1 6 slotting mills (2 flutes) 6 end mills (4 flutes) Side mill arbor MT2 (Weldon) tightening thread M10 no Ø 6 mm Location hole no Ø 8 mm Location hole no Ø 10 mm Location hole no Ø 12 mm Location hole no Ø 16 mm Location hole no Ø 20 mm Location hole each no TITAN end mill set (4 flutes) short 9 pieces no TITAN coated mill set 20 pieces 10 slotting mills (2 flutes) 10 end mills (4 flutes)
8 no Radius mill set HSS (4 flutes) no Angle milling cutter set HSS No Slot cutter set HSS 9 pieces no Corner rounding end mill set HSS 8 pieces no Carbide milling cutter set 14 pieces Ø from 0.7 to 2.0 mm no Mill storage box for shank Ø mm for 62 mills no Countersink bit set 90 HSS 6 pieces with 3 blades right hand cutting no TITAN coated step drill set no Countersink bit and deburrer set 90 HSS with cross hole no TITAN coated step drill Ø 4-12 mm no Counterbore set HSS 7 pieces with solid dowel pin no TITAN coated step drill Ø 5-28 mm no Pin punch set 8 pieces Ø total length 100 mm no Original Vertex Auto center punch for one hand operation length 130 mm - shank Ø 14 mm no Hand reamer set HSS 11 pieces adjustable no Tap and die set HSS M1 - M pieces M1 M1.1 M1.2 M1.4 M1.6 M1.8 M2 M2.2 M2.5 no Tap and die set HSS 31 pieces no Tap and die set HSS 44 pieces
9 no Tapping drill and hand tap set HSS 29 pieces no Tapping drill set HSS drill range 1-10 mm pitch 0.5 mm 19 pieces Tapping stand no without Machine vice no with Machine vice 85 mm no Circle cutter with bevelled blade grooving capacity mm material strength up to approx. 5 mm drill hole 5 mm no Original Vertex Tapping chuck for thread cutting from M4 to M12 inner taper B16, head Ø 42 mm total length 72 mm for machine tools with right hand and left hand operation no Tapping chuck set M4 bis M12 no Tapping chuck no Drill chuck arbor MT no Tapping attachment 9 pieces MT2 and flat tang, 4 die holders Ø mm. 4 tap holders Ø mm no fold tool turret 21 pieces MT2 and tightening thread M Application example Application example no Standard boring head MT2 and tightening thread M10 head Ø 50 mm feed accuracy 0.02 mm location bore 12 mm no Standard boring head set MT2 no Standard boring head no Boring bar set no Standard boring head MT2 and tightening thread M10 head Ø 75 mm feed accuracy 0.02 mm no Standard boring head set MT2 No Standard boring head No Boring bar set no Standard boring head set ISO30 No Standard boring head No Boring bar set Boring bar sets carbide tipped 9 pieces no shank Ø 10 mm no shank Ø 12 mm no Fly cutter set HSS blade
10 no Dividing attachment Ø 100 mm indexing discs and tailstock are not available Dividing attachment sets no Dividing attachment Ø 100 mm no Flange Lathe chuck Ø 80 mm no jaw chuck no jaw chuck no Dividing attachment Ø 80 mm with independent chuck Ø 70 mm and flange indexing discs and tailstock are not available no Original Vertex Precision Dividing attachment Ø 110 mm no Dividing attachment Set no Dividing attachment Ø 150 mm no Indexing discs Dividing attachment Sets no Dividing attachment Ø 110 mm no Flange Lathe chuck Ø 80 mm no Tailstock with height adjustment height adjustment mm suitable for dividing attachment no no jaw chuck no jaw chuck Dividing attachments Original Vertex swiveling no Original Vertex Indexing discs for dividing attachment for indirect indexing, suitable for Vertex dividing attachments Ø 110 and 150 mm and dividing attachment no no Original Vertex Tailstock with height adjustment height adjustment mm suitable for Vertex dividing attachments Ø 110 and 150 mm no Ø 110 mm no Ø 150 mm no Original Vertex Precision Dividing attachment Ø 150 mm no Original Vertex Dividing attachment set no Dividing attachment Ø 150 mm no Indexing discs Dividing attachment sets no Dividing attachment Ø 150 mm no Flange lathe chuck no jaw chuck Ø 100 mm no jaw chuck Ø 125 mm Dividing attachment sets 4 pieces no Dividing attachment Ø 150 mm no Indexing discs no Flange lathe chuck no jaw chuck Ø 100 mm no jaw chuck Ø 125 mm
11 Machine vices 1 axis machine vices Original Vertex Precision machine vices no width of jaws 85 mm opening width 70 mm no width of jaws 100 mm opening width 90 mm no width of jaws 120 mm opening width 105 mm no width of jaws 100 mm opening width 65 mm no individual prism jaw suitable for no width of jaws 125 mm opening width 85 mm no individual prism jaw suitable for Precision toolmakers vices no width of jaws 25 mm opening width 20 mm no no width of jaws 48 mm opening width 70 mm no width of jaws 63 mm opening width 90 mm no width of jaws 88 mm opening width 125 mm no width of jaws 125 mm opening width 160 mm no width of jaws 50 mm opening width 65 mm no width of jaws 73 mm opening width 100 mm no width of jaws 88 mm opening width 125 mm Precision sine vices swivelling by 45 no width of jaws 50 mm opening width 65 mm no width of jaws 73 mm opening width 100 mm no Precision 2 axis machine vice width of jaws 70 mm opening width 80 mm no Original Vertex Precision quick-action machine vice width of jaws 80 mm opening width 88 mm no Original Vertex Work stop tool 5 axes infinitely rotatable and slidable, rotatable by All steel vices no width of jaws100 mm no width of jaws125 mm no width of jaws150 mm no width of jaws175 mm All steel vice sets All steel vice Aluminium protective jaws Plastic protective jaws no Vice 100 mm Aluminium protective jaws 100 mm Plastic protective jaws 100 mm no Vice 125 mm Aluminium protective jaws 125 mm Plastic protective jaws 125 mm no Parallel vice rotating width of jaws 50 mm opening width 70 mm Aluminium pipe and protective jaws no for 100 mm no for 125 mm no for 150 mm Plastic pipe and protective jaws no for 100 mm no for 125 mm no for 150 mm
12 Magnifying lamps 230 V, 50 Hz no enlarges 3-fold no Original Vertex Machine light with joint arm with magnetic base 230 V, 50 Hz shade diameter 70 mm joint arm length 500 mm no Original Vertex Machine light with ball joint arm with magnetic base 230 V, 50 Hz shade diameter 70 mm joint arm length 375 mm no enlarges 10-fold no Original Vertex LED machine light with joint arm with magnetic base 230 V, 50 Hz shade diameter 34 mm joint arm length 380 mm no Original Vertex Machine light with joint arm and head with magnetic base 230 V, 50 Hz shade diameter 70 mm length of joint arm 500 mm no Original Vertex Machine light with joint heads with mounting plate for fixing 230 V, 50 Hz shade diameter 110 mm length of 2 joint arms 400 mm each no Wave-shaped parallels 8 pairs length 110 mm no Precision parallels 6 pairs length 120 mm no Precision parallels 9 pairs length 150 mm Step clamp sets 58 pieces no for 10 mm T-slot width M8 thread no for 12 mm T-slot width M10 thread no for 14 mm T-slot width M12 thread no for 16 mm T-slot width M14 thread Step clamp sets 10 pieces no for 10 mm T-slot width M8 thread no for 12 mm T-slot width M10 thread T-nut blocks PU: 4 pieces no for 10 mm T-slot width M8 thread no for 12 mm T-slot width M10 thread no Angle plate 90 longitudinal grooves 3x12 mm transverse grooves 1x14 mm dimensions 115 x 90 x 75 mm no Angle plate 90 longitudinal grooves 4x14 mm transverse grooves 4x14 mm dimensions 150 x 130 x 115 mm no Angle plate 90 longitudinal grooves 6x14 mm transverse grooves 6x14 mm dimensions 210 x 155 x 130 mm
13 no Universal tool grinder weight 42 kgs no Original Vertex Chamfering and deburring machine face mill with 6 exchangeable indexable inserts no Keyway broaches HSS 2x x no Keyway broaches HSS 4x x x x pieces no Original Vertex Precision twist drill grinder no Original Vertex Boron nitride (CBN) grinding wheel Ø 80 grain 200 no Disc grinder grinding disc Ø 300 mm speed 1450 r.p.m. weight 42 kgs no Boron nitride (CBN) grinding wheel Ø 100 grain no C Collet set (type 385E) 18-pieces collet-ø mm Arbor presses no press force 1t weight 14.5 kgs no press force 2t weight 39 kgs replacement grinding discs adhesive, PU: 1 piece no grain no grain no grain no Grinding disc set included in delivery each 1 piece grain 60, 80 and 100 no Original Vertex Universal coolant unit suitable for all machine tools no Coolant concentrate content 5 l no Original Vertex 3-fold coolant hose with magnetic base coolant hose 300 mm each no Original Vertex Mist coolant system with magnetic base working pressure 2-6 bar connection for compressed air hose Ø 13 mm T-slot cover rail Original Vertex PU:. length per cover 400 mm chip deflector no for 12 mm T-slot width no for 14 mm T-slot width each no Grease gun for grease and oil, for conical and ball head grease nipples with a pointed and a hollow / universal mouthpiece no Levelling element Ø 80 mm, thread M10 pick up and absorption element PU: 1 piece
14 Drilling and milling stands with Euronorm Ø 43 mm 4 T-slots for 10 mm T-slot width steel column 500 mm hexagonal steel bracket 350 mm no without Rotary table steel column 500 mm hexagonal steel bracket 500 mm no without Rotary table steel column 750 mm hexagonal steel bracket 500 mm no without Rotary table no with Rotary table no with Rotary table no with Rotary table Examples of use vertical milling horizontal drilling working with 2 attachments as a small lathe vertical drilling working with milling table thread cutting as a chop saw no no Drilling and milling stand no Milling table no Machine vice 85 mm no no Drilling and milling stand no Milling table no Machine vice 85 mm no no Drilling and milling stand no Milling table no Machine vice 85 mm
15 steel column 500 mm hexagonal steel bracket 350 mm Drilling and milling stands Sets steel column 500 mm hexagonal steel bracket 500 mm steel column 750 mm hexagonal steel bracket 500 mm no no Drilling and milling stand no Drill holder no no Drilling and milling stand no Drill holder no no Drilling and milling stand no Drill holder no no Drilling and milling stand no Clamping fixture no Machine vice 100 mm no no Drilling and milling stand no Clamping fixture no Machine vice 100 mm no no Drilling and milling stand no Clamping fixture no Machine vice 100 mm no no Drilling and milling stand no Machine vice 100 mm no no Drilling and milling stand no Machine vice 100 mm no no Drilling and milling stand no Machine vice 100 mm no no Drilling and milling stand no Step clamp set 10 pieces no no Drilling and milling stand no Step clamp set 10 pieces no no Drilling and milling stand no Step clamp set 10 pieces no no Drilling and milling stand no Step clamp set 58 pieces no no Drilling and milling stand no Step clamp set 58 pieces no no Drilling and milling stand no Step clamp set 58 pieces no no Drilling and milling stand no Tapping attachment no no Drilling and milling stand no Tapping attachment no no Drilling and milling stand no Tapping attachment
16 Drilling stand with Euronorm Ø 43 mm steel column Ø 35 mm no without Rotary table no with Rotary table Drilling stand Sets no no Drilling stand no Machine vice 100 mm no no Drilling stand no Machine vice 100 mm Milling table Sets no Milling table 3 T-slots for 10 mm T-slot width work table 400 x 180 mm no No milling table No step clamp set 10 pieces no No milling table No step clamp set 58 pieces no Clamping fixture for horizontal drill support with Euronorm Ø 43 mm no Drill holder for supporting a second drill with Euronorm Ø 43 mm no Rotary table retrofitable for column Ø 35 mm table Ø 180 mm no Step clamp set 58 pieces for 10 mm T-slot width M8 thread no Step clamp set 10 pieces for 10 mm T-slot width and thread M no T-slot blocks for 10 mm T-slot width and thread M8 PU: 4 pieces no Quick-action machine vice width of jaws 60 mm opening width 70 mm no Quick-action machine vice width of jaws 100 mm opening width 100 mm Machine vices no Width of jaws 85 mm opening width 70 mm no width of jaws 100 mm Opening width 90 mm no Drilling and milling gear motor 0.68 kw, 230 V, 50 Hz no Tapping attachment suitable for all drill stands with Euronorm Ø 43 mm no Universal multifunction holder suitable for all drilling machines with Euronorm Ø 43 mm
March weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationMERRY PRICES WABECO CHRISTMAS PROMOTION. Unique multi-talented system that home workers dream about and that impresses the professionals
Frohe Weihnachten - Merry Christmas - Feliz Navidad - Joyeux Noël - Boas Festas s - Vrolijk Kerstfeest - Hyvää Joulua Unique multi-talented system that home workers dream about and that impresses the professionals
More informationPerfect in precision. F1200 No D6000 No , , , , basic equipment includes: basic equipment includes:
Perfect in precision tool holder ISO30 work table 450 x 180 mm F1200 No. 11905 2,249.00 3,309.39 longitudial travel X-axis 260 mm transverse travel Y-axis 150 mm 1.4 kw, 140-3000 RPM main spindle bore
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationTHE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines
THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationTOP WORK ISO 9001.CE UNIVERSAL CUTTER & TOOL GRINDER
TOP WORK ISO 9001.CE UNIVERSAL CUTTER Precise ball groove of conformation Inclination of Wheelhead The wheelhead can easily tilt up to ±15 degrees, with a 360-degrees swivel on the horizontal plane. The
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationVHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
More informationSummer Junior Fellowship Experience at LUMS. Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship
Summer Junior Fellowship Experience at LUMS Maliha Manzoor 13 June 15 July, 2011 LUMS Summer Internship Internship Schedule June 13-17: 2D and 3D drawings in AutoCAD June 20-24: 2D and 3D drawings in AutoCAD
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationCompatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationTU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head
TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691
More informationTypical Parts Made with These Processes
Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationMF 1 MF 1 V MF 1 MF 1 V. Multipurpose Milling Machines. Most widely used milling machine type word-wide!
Multipurpose Milling Machines Most widely used milling machine type word-wide! with 3 axes position indicator head swivels through 3 axes swivel r + l ± 90 ilt forward + reverse ± 45 rotation on the column
More informationAhsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering
Ahsanullah University of Science and Technology (AUST) Department of Mechanical and Production Engineering LABORATORY MANUAL For the students of Department of Mechanical and Production Engineering 1 st
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationCOLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationHM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand
HM-47 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column & Stand Ex GST Inc GST $3,790.00 $3,280.00 $4,358.50 $3,772.00 Special Ends 30/06/2018
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,470.00 $2,840.50 ORDER CODE: M123 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationAL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity
AL-320G - Bench Lathe, Stand & Tooling Package Deal 320 x 600mm Turning Capacity Ex GST Inc GST $3,200.00 $3,680.00 ORDER CODE: MODEL: Swing Over Bed (mm): Distance Between Centres (mm): Spindle Bore (mm):
More informationHM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System
HM-50 - Turret Milling Machine (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System Ex GST Inc GST $5,500.00 $6,325.00 ORDER CODE: MODEL: Digital Readout: Type: Table Size
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationDRILLING AND MILLING MACHINES
DRILLING AND MILLING MACHINES KF 10 KF 10 L KF 20 KF 20 L KF 20 Super KF 20 L Super KF 16 L Vario KF 25 D Vario KF 25 L Vario KF 25 PRO BF 25 Super BF 25 L Super BF 30 Super FM 45 eco BF 40 eco FM 40 FM
More informationSpecial Tools And Modified Standards. Some examples of specials and their uses
Special Tools And Modified Standards Tooling These special tools are designed to produce a complex hole shape in a single pass. They can incorporate as many steps, tapers, radii or contours as necessary.
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY UNIT V Machine Tools Milling cutters Classification of milling cutters according to their design HSS cutters: Many cutters like end mills, slitting cutters, slab cutters, angular
More informationGerman machine manufacturer
2008 German machine manufacturer During our more than 120 years old history steeped in tradition, Walter Blombach has grown into a leading manufacturer of machine tools with an extensive product range.
More information6 AXES CNC TOOL GRINDING MACHINES
6 AXES CNC TOOL GRINDING MACHINES Conical relief with S -splitting U-splitting 4-facett with S-splitting 4-facett with X-splitting NC.drills Counteringdrill 3 Flutes Stepdrill conical relief with S splitting
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 Copy and planing cutter head MT 2 3350212 BF30 BF46 BF46 ISo30 ISO40 MT4 MF1 MT 50 MT2BV Mf2
More informationWORKSHOP EQUIPMENT inc GST ORDER CODE: B inc GST
WORKSHOP EQUIPMENT RNB40 NUT & BLIND RIVETER SET 130 piece kit suitable for sheet aluminium, steel & stainless Includes: Aluminium rivet nut inserts: M5, M6, M8, M10 - (10 of each size) Blind aluminium
More informationTool & Cutter Grinder
Tool & Cutter Grinder The Bonelle Tool and Cutter grinder (based on prof. Chaddock s Quorn) can be used to grind most kind of tools from lathe tools to end-mills and reamers. I have been grinding my end-mills
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More informationAL Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand
AL-336 - Centre Lathe 300 x 900mm Turning Capacity Includes Cabinet Stand Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: MODEL: L682 AL-336 Swing Over Bed (mm): 300 Distance Between Centres (mm): 900 Spindle
More informationHM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm
HM-50 - Turret Milling Machine Package with Digital Readout & Tooling Accessories (X) 600mm (Y) 220mm (Z) 340mm ORDER CODE: MODEL: Digital Readout: Type: Table Size (mm): Column Type: Spindle Taper - Vertical:
More informationSTEEL RULE. Stock TRY SQUARE
FITTING INTRODUCTION Fitting consists of a handwork involved in fitting together components usually performed at a bench equipped with a vice and hand tools. The matting components have a close relation
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products
THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More informationIC LEARNING SERIES. Marking Out, Measurement, Fitting & Assembly
IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly The Hong Kong Polytechnic University Industrial Centre IC LEARNING SERIES Marking Out, Measurement, Fitting & Assembly Suitable for the following
More informationME MANUFACTURING TECHNOLOGY LABORATORY-I VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI LAB MANUAL
VARUVAN VADIVELAN INSTITUTE OF TECHNOLOGY DHARMAPURI 636 703 ME 6311 - MANUFACTURING TECHNOLOGY LABORATORY-I REGULATION 2013 LAB MANUAL BRANCH YEAR / SEM MECHANICAL ENGINEERING II YEAR & III SEMESTER D
More informationHM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical
HM-54GV - Turret Milling Machine Inverter Variable Speed, Geared Head Horizontal & Vertical Ex GST Inc GST (X) 600mm (Y) 200mm (Z) 340mm Includes Digital Readout, Vice & Collet Chuck System $7,250.00 ORDER
More informationProduct Brochure For L682D. Description. Features. Auckland: (09)
AL-336D DELUXE - Centre Lathe 300 x 900mm Turning Capacity Includes Digital Readout, Quick Change Toolpost, Leadscrew Covers, Foot Brake & Cabinet Stand Ex GST Inc GST $5,200.00 $5,980.00 ORDER CODE: MODEL:
More informationMachine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
More information1. The Lathe. 1.1 Introduction. 1.2 Main parts of a lathe
1. The Lathe 1.1 Introduction Lathe is considered as one of the oldest machine tools and is widely used in industries. It is called as mother of machine tools. It is said that the first screw cutting lathe
More informationLooking for a small band saw? The Ellis 1100 band saw might be just what you are looking for.
1100 MITRE BAND SAW Looking for a small band saw? The Ellis 1100 band saw might be just what you are looking for. This portable band saw moves easily to the job site. Use it as horizontal or vertical saw.
More informationUNIT 4: (iii) Illustrate the general kinematic system of drilling machine and explain its working principle
UNIT 4: Drilling machines: Classification, constructional features, drilling & related operations, types of drill & drill bit nomenclature, drill materials. Instructional Objectives At the end of this
More informationOUR GLOBAL AFTER SALE SERVICE NETWORK. Service-Hotline
OUR GLOBAL AFTER SALE SERVICE NETWORK Service-Hotline +49 800 1000688 service@isog-technology.com Dortmund Stuttgart Ulm Nürnberg Berlin Passau Printed in the Federal Republic of Germany. Edition 201408/E/PDF/11.
More informationLathe Accessories. Work-holding, -supporting, and driving devices
46-1 Lathe Accessories Divided into two categories Work-holding, -supporting, and driving devices Lathe centers, chucks, faceplates Mandrels, steady and follower rests Lathe dogs, drive plates Cutting-tool-holding
More informationChapter 23 Drilling and Hole Making Processes. Materials Processing. Hole Making Processes. MET Manufacturing Processes
MET 33800 Manufacturing Processes Chapter 23 Drilling and Hole Making Processes Before you begin: Turn on the sound on your computer. There is audio to accompany this presentation. Materials Processing
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationHM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column
HM-46 - Mill Drill - Geared & Tilting Head (X) 475mm (Y) 195mm (Z) 450mm Dovetail Column Ex GST Inc GST $2,600.00 $2,860.00 ORDER CODE: M124 MODEL: HM-46 Digital Readout: Optional Type: Vertical Table
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationMachine Tool Technology/Machinist CIP Task Grid
1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and
More informationEquipment. Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands. Lot no.
Engineering Machinery and Equipment (Ends: 2016-04-21 14:00:00.0) Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands Lot 1 Daewoo Puma model
More informationOperating Instructions. Universal drilling and milling machines with linear guideways
Operating Instructions Universal drilling and milling machines with linear guideways F1410 LF F1410 LF high speed CC-F1410 LF CC-F1410 LF high speed Walter Blombach GmbH Tool and Machine Factory D-42899
More informationThe National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI
The National Institute for Metalworking Skills, Inc. Duties and Standards For Machining Skills-Level II NIMS/ANSI 101-2001 Developed By: Copyright July 1997-Revised September 2001 Distributed by: The National
More informationMotor Power (kw / hp): Voltage / Amperage (V / amp): Shipping Dimensions (L x W x H) (cm): Nett Weight (kg): Features
AL-356V - Centre Lathe 356 x 1000mm Turning Capacity - 51mm Spindle Bore Includes Digital Readout, Quick Change Toolpost & Electronic Variable Speed With Digital Readout Ex GST Inc GST $7,150.00 $7,865.00
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationHM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand
HM-48 - Mill Drill - Geared & Tilting Head with DRO (X) 540mm (Y) 185mm (Z) 410mm Includes Digital Readout, Dovetail Column, Power Feed & Stand Ex GST Inc GST $4,350.00 $3,990.00 $4,785.00 $4,389.00 Special
More informationFlat file. Round file. Hand file. Half -round. Mill file. Square file
Name Picture Cross section Uses: Cut pattern:: Hand file used for roughing and finishing. It has double cut teeth on two faces, single cut teeth on one edge, and one safe edge Flat file used for roughing
More informationPennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
More informationWorkshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP
Workshop - Carbide Burs - Countersinks - Measuring Tools - Reamers WORKSHOP Workshop Workshop Index 282 Adjustable Reamers 287 Air Tools Die Grinder Kit 286 Carbide Burs Double Cut 285 Countersinks 292
More informationMONASET CM-2. Has these customer proven features...
MONASET CM-2 Has these customer proven features... We looked at our successful Monaset grinder very closely before we came up with the engineering refinements which, when combined with its field proven
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
More informationChapter 24 Machining Processes Used to Produce Various Shapes.
Chapter 24 Machining Processes Used to Produce Various Shapes. 24.1 Introduction In addition to parts with various external or internal round profiles, machining operations can produce many other parts
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationMachinist NOA (2010) Subtask to Unit Comparison
Machinist NOA (2010) Subtask to Unit Comparison NOA Subtask Task 1 Organizes work. 1.01 Interprets documentation. A16 Job Planning 1.02 Plans sequence of operations. A16 Job Planning 1.03 Maintains safe
More informationPSK Tool Holders. Chapter 2 of the Product Catalogue 2010/2011 Precision Tools
PSK Tool Holders Chapter 2 of the Product Catalogue 2010/2011 Precision Tools PSK - Polygonal Kelch GmbH Tel.: +49 (0) 71 51 / 2 05 22-0 Fax: +49 (0) 71 51 / 2 05 22-11 info@kelchgmbh.de www.kelchgmbh.de
More informationTU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $ $908.50
TU-1503V - Opti-Turn Bench Lathe - Mini 150 x 300mm Turning Capacity Electronic Variable Speeds Ex GST Inc GST $790.00 $908.50 ORDER CODE: L685 MODEL: TU-1503V Swing Over Bed (mm): 150 Distance Between
More information1 Moore No2 Jig Grinder Moore No2 Jig Grinder, Anilam 2 axis DRO, 270mm Moore rotary table, 60,000 rpm, tooling and cabinet
Raicam Automotive Sale 1 Tool Room (Ends: 2017-03-22 14:00:00.0) Online Auction Of Tool Room Machinery And Associated Equipment. Lot 1 Moore No2 Jig Grinder Moore No2 Jig Grinder, Anilam 2 axis DRO, 270mm
More informationCNC milling machines. Pocket milling. Milling of segments into a drive wheel. Milling of the outer contour
CNC milling machines You want to mill with precision! WABECO CNC milling machines guarantee you the ultimate precision covering the entire working range of the machine. Production in Germany on state-of-the-art
More informationHAFCO METALMASTER HM-51. Turret Milling Machine. (X) 600mm (Y) 220mm (Z) 310mm. Product Brochure
Product Brochure M576 HAFCO METALMASTER HM-51 Turret Milling Machine (X) 600mm (Y) 220mm (Z) 310mm Page 1 of 5 Specifications & Prices are subject to change without notification - 2018-06-26 M576.pdf Left
More informationRevised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018
Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational
More informationBD-405 MINI LATHE BD-712 METAL LATHE. Distance between centers Hole through spindle. Cross slide travel
BD-405 MINI LATHE Cast iron with ground, hardened slideways Belt driven, with variable speed self-centring 3 jaw scroll chuck Chuck guard with a safety interlock Supplied with 3 jaw chuck, wrench set and
More informationCutting Drilling & Tapping
Cutting Drilling & Tapping Section Dowel Drills - Brad Point.0mm ( W Point) C113 $..0mm ( W Point) C1137 $7.0 $.70.0mm ( W Point) C1138 $9.30 $8.0 8.0mm ( W Point) C1 $9.0 $8.0.0mm ( W Point) C1127 $9.0
More informationEMCOMAT E-200 MC for the m cycle-controlled m
EMCOMAT E-200 MC for the m cycle-controlled m 1 HEADSTOCK Solid cast-iron construction Powerful Siemens drive system Short taper spindle nose with CAMLOCK adaptor Spindle bore diameter ø 53 (50) mm 2 2
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More informationUNIT 5: Indexing: Simple, compound, differential and angular indexing calculations. Simple problems on simple and compound indexing.
UNIT 5: Milling machines: Classification, constructional features, milling cutters nomenclature, milling operations, up milling and down milling concepts. Indexing: Simple, compound, differential and angular
More informationEntry Level Assessment Blueprint Precision Machining
Blueprint Precision Machining Test Code: 4152 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Organization and Shop Practices Demonstrate safe work habits and operating procedures
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More information