P2784 3" (76.2) (31.8) 25 to 45 PFL2-37

Transcription

1 P289 (2.0) (.) 2 (.2) 2 (2.4) 2 (.2) hreaded esign (Safety Factor of 4) (angles 2 ) - 0 Lbs (2.4 kn) ) - 0 Lbs (.4 kn) Safety Factor 4 orque: Ft-Lbs (8 N m) PFL2- to (.2 to 9.) to 4 t/00 : Lbs (.0 kg) 90 2 to 4 P284 " (.8) (0.2) than cast beam clamps, the Swiftgrip enables connection of drop rod to beam in one simple operation. Ideal for the suspension of building services equipment including heating, equipment and cable tray. dustry Standard Yellow ichromate. esign is 40 Lbs (2.40 kn). Safety Factor is 4 orque is 8 Ft/Lbs (0.8 N m) is (9.mm) t/00 : 26 Lbs (.9 kg) (.8) P284- P284-2 P284- For Use ith P000, P00, P00, P0, P200 P00, P0 Lbs t/00 (kn), , , SIFGRIP Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut 8" 2 (2.4) (4.6) Set Screw and Nut (.9) 2 Holes 9 (.) ia. 4 Holes (0.) ia. up to Clamp Materials:.0" (2.) thick steel. Clamp is designed for light duty rod suspension. It also may be used with P or P nut as illustrated above for mounting insulators, etc. up to 8" esign 20 Lbs (. kn) esign 0 Lbs (.6 kn) P8000, P800 JUNIOR UCILE IRON OP EM CLMP Material: 8" and 2" rod sizes Finish: Plain (PL) and Electro-Galvanized () Function: Structural attachment to top or bottom of metal beams, purlins, channel, or angle iron Features: Set screw made of hardened steel Complies with Federal Specification -92 (ype 9) and MSS SP-69 (ype 9) No. Plain & Max op Lbs* Max ottom Lbs* eight Lbs P P NOE: *Max load may exceed allowable load for threaded rod size shown. Set Screw Jam Nut Electrical Fittings Concrete serts t/00 : Lbs (.0 kg) P06-024, or P Nut sulator ypical pplications Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in 4 6 Solar Unipier 8" Framing System 9

2 Unipier Solar Concrete serts Electrical Fittings Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut 8" P266 P2898 C G P2899 C 2 Holes 9 (4.) ia. E F 2 (.0) 2 Holes (.) ia. E 2 (66.) (.2) (.) 2" Set Screw and Nut Swivel Nut and Jam Nut not t/00 : 2 Lbs (2. kg) up to Swivel (0.8 ) ll irections t least one full thread must be exposed (2.) (.8) P2682 (4.8) 2 (96.0) (44.) P269-4, -6 & -8 (4.) P2682 P26 up to Hanger clevis for up to (2.) rod suspension from wood ceilings. May also be used with P26 as illustrated in application drawings. Use w/p266 and P26. Order size as required. (.9) 4 Holes (.) ia. up to 2" esign 00 Lbs (. kn) esign 00 Lbs (2.22 kn) Clamp P266 provides a means of rod suspension where a free swing of up to (0.8π) is required. Clamp will accommodate, (9.), or (2.) rods. Order swivel nuts P269-4,-6, or -8 as required. Clamp may also be used with P26 as illustrated in application drawings. Clamp Materials: (.2) thick steel. Not available in SS or S. UNIERSL EM CLMP C E F G Max t/00 P P P P P , up to 2" Swivel (0.08π) ll irections t/00 : Lbs (24.9 kg) SIEL NU No. hread t/00 P (.8) P (2.) P (2.) P2899- P P P2899- P26 IE HRO EM CLMP in C E t/ (.2) 2" 2 (6.) (.8) (4.9) Screw, Nut, and Lock ash Clevis hanger to be used with P266 or P2682 to provide angle adjustment and (0.08 π) free swing for up to (2.) rod suspension. Order swivel nuts P269-4, -6, or -8 as required. up to 2" t/00 : 0 Lbs (.6 kg) P266 Swivel (0.08π) ll irections esign 00 Lbs (2.22 kn) Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in 96 CORE PROUCS - YPICLLY ILLE FROM SOCK 8" Framing System

3 P264 (44.) Clevis hanger to be used with to provide angle adjustment for up to rod suspension as illustrated. P640 (20.6) 2" x 2" Cone Point Set Screw w/spring.9" Screw, Nut, and Lock asher (.2) Hole (0.) ia. t/00 : Lbs (. kg) P8S, P240S, P240S, P240S eld.88" 2" apped UNC olt ø0.44 2" Set Screw C (92.) up to 8" esign 20 Lbs (. kn) hread P P P apped Hole (82.6) E eld is not continuous it is either (.8) - (44) long or 2 spot welds. ll welds are on the top and bottom. For beams between (9.) to C E t/00 esign P8S 4-20 x P240S x , P240S x , P240S - 6 x , P648S HRU P6S eld apped Hole P648S P649S P60S P6S P62S P6S 2 (6.) Set Screw C 2 (6.) For beams under thick eld is not continuous it is either (.8) - (44.) long or 2 spot welds. ll welds are on the top and bottom. P64 HRU P66 For beams under Strap P64 P6 P66 P6 P68 P69 P660 P66 C t/00 esign 4-20 x x x , x 2 6 0, x , x , P64 & P6 P66 thru P66 REINER SRP 2 Gage Flange idth t/ (.) Hole " (2.4) 2" (.) Hole (4.9) eam Clamp Used ith P648 S hru P6 S, P8S, P240S & P240S Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in P266 P266 P266 (2.) Unipier Solar Concrete serts Electrical Fittings Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut 8" 8" Framing System CORE PROUCS - YPICLLY ILLE FROM SOCK 9

4 8" P2S - Set Screw F,, GR, HG P96S - Set Screw HG (44.) P2824-6,-9,-2 (4.8) For use with eams up to 4 HG Unipier Solar Concrete serts Electrical Fittings Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut (4.) (9.) 2 Holes 9 (4.) ia. Note: Requires P00 Nut and bolt. P28 (8.) P28 (8.) esign Each 00 Lbs (2.22 kn) t/00 : 9 Lbs (4. kg) 8 (209.6) P286 " (2.0) " Hex Nuts and "U" olt " t/00 : 8 Lbs (.6 kg) Hex Nuts and "U" olt " t/00 : 2 Lbs (0.8 kg) (88.9) t/00 : 9 Lbs (4. kg) (88.9) esign Each 00 Lbs (2.22 kn) For use with eams up to (9.) Flanges and with s P000, P00,, P000, P00, P0, P4000, P400, P400, and P40. eam "" t/00 P286 4"-6" (68.) P "-9" (.2) P "-2" 66 (.) P286-2"-" 6 (9.8) P286-8 "-8" 8 (8.9) cludes: "J" olt, "U" olt and Hex Nuts. For use with P00, P0, P200, P00, P000, and P00. F,, GR, HG esign Each 000 Lbs (4.4 kn) F,, GR, HG For use with eams up to (9.) Flanges and with s P00 and P0. esign Each 000 Lbs (4.4 kn) HG P286 " (2.0) P286 (8.) P286 8 (209.6) " " (4.8) " P P P Hex Nuts and "U" olt t/00 : 92 Lbs (4. kg) Clamp Requires 2" iameter and 2 Hex Nuts (Sold Seperately) t/00 esign F,, GR, HG For use with eams up to (9.) Flanges and with s P00, P0, P200, P00, P000, and P00. esign Each 000 Lbs (4.4 kn) HG eam "" t/00 P286 4"-6" 42 (64.4) P "-9" (68.) P "-2" 60 (2.6) P286-2"-" 0 (.) P286-8 "-8" 9 (8.2) cludes: "J" olt, "U" olt and Hex Nuts. For use with s P000, P00,, P000, P00, P0, P4000, P400, P400, and P40. HG eam "" t/00 P286 4"-6" 6 (.0) P "-9" 6 (.) P "-2" 6 (9.8) P286-2"-" 86 (84.4) P286-8 "-8" 9 (88.) cludes: "J" olt, "U" olt and Hex Nuts. For use with P00, and P0. Note: hen used for mechanical supports, load capacities of brackets and fittings should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in pairs where indicated. For beam clamps with HG finish, standard hardware is finish. For optional stainless steel hardware, please contact the factory for availability. 98 CORE PROUCS - YPICLLY ILLE FROM SOCK 8" Framing System

5 P2868 P2868 P289 (8.) " 8 (209.6) " Material: Steel Use ith: rod Rating: lbs. (. kn) P2896 t/00 : 4 lbs. (6.4 kg) eam "" t/00 P2868 4"-6" 282 (2.9) P "-9" 289 (.) P "-2" 6 (4.) P2868-2"-" 04 (.9) P "-8" (4.) cludes: Center, "U" olts and Hex Nuts. For use with s P000, P00,, P000, P00, P0, P4000, P400, P400, and P40. eam t/00 "" P2868 4"-6" 20 (4.) P "-9" 2 (48.) P "-2" 4 (.) P2868-2"-" 42 (.) P "-8" 49 (.) cludes: Center, "U" olts and Hex Nuts. For use with s P00, and P0. P289 Material: Steel (9.) HG HG P2868 " (2.0) eam "" t/00 P2868 4"-6" 00 (6.) P "-9" 0 (9.) P "-2" 4 (42.2) P2868-2"-" 22 (46.) P "-8" (49.2) " cludes: Center, "U" olts and Hex Nuts. For use with s P00, P0, P200, P00, P000, and P00. P (.2) P P2894- P P289- P289-0 P P289- Material: Malleable Iron Maximum Flange ness Note: apped Hole on op and ottom Ratings t/ Ratings t/ HG Electrical Fittings Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut 8" Material: Malleable Iron, Steel Set Screw 4" (9.) 2" (2.) 8" (9.) P2896- P P P2896- Ratings t/ Concrete serts Solar Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in Unipier 8" Framing System CORE PROUCS - YPICLLY ILLE FROM SOCK 99

6 General Fittings Nuts & Hardware elestrut 8" P86 (2.) 2 (4.2) Clamp Requires - Hex Head Cap Screw and Nut Not. P22S, P98S, P986S Style P000 P00 t/00 : 2 Lbs (2.2 kg) (.8) F,, GR, HG esign Each () P9S - Set Screw " (2.4) P22S P98S P986S (82.6) Clamp Requires x Hex Head Cap Screw and Nut Not. Style P000 (9.) t/00 : Lbs (4.0kg) Flange ness Set Screw P00 t/00 HG esign Each () HG esign Per Pair () 4 Up to x Up to Up to 4 62, x 2 9. Up to to x Unipier Solar Concrete serts Electrical Fittings Pipe/Conduit Supports P08 P08 P08 djusting Screws djusting Screws. Unistrut channel not included. number P08 consists of: () piece P08, () piece P08 and (2) set screws, ia. PLLC02 Material: Malleable Iron. t/00 : 6 Lbs (6. kg) Lbs. 40 Lbs. COLUMN INSER esign Pull esign Out Slip P000, P Safety factor of. - " ( - 2) Cup point set screw and lock nut included. Y S U P088 P088 P088 djusting Screws djusting Screws. Unistrut channel not included. number P088 consists of: () piece P088, () piece P088 and (2) set screws, ia. Set Screw orque = Ft-Lb Lock Nut orque =. Ft-Lb, Y are threaded holes. PLLC02 t/00 : 20 Lbs (4.4 kg) S COLUMN INSER esign Pull Out esign Slip P00, P P Safety factor of. - " ( - 2) FLNGE CLMP Set Screw t/00 PLLC02 6 (.) imensions U, Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in, Y CORE PROUCS - YPICLLY ILLE FROM SOCK 8" Framing System

7 PFL0 HRU PFL00 Material: Malleable Iron. Cup point set screw and lock nut included. Set Screw orque = 6 Ft-Lb Lock Nut orque = 6 Ft-Lb PLF0 HRU PLF0 Material: Malleable Iron. hreaded & Nut Not PLF90 HRU PLF900 PLF0 PLF00 PLF062 PLF0 hreaded & Nut Not t/00 Y U llowable , Safety Factor: 4 Safety Factor: 4 Set Screw FLNGE CLMP llowable ype of Hole t/00 PFL0 Clear 28 (2.) 40 (2.40) PFL0 apped 28 (2.) 40 (2.40) PFL00 Clear 40 (8.) 00 (.) PFL00 apped 40 (8.) 00 (.) imensions U Y PFL PFL apped Hole PFL PFL apped Hole orque Ft-Lbs Material: Malleable Iron. Safety Factor: 4 S PLF90 PLF900 PLF9062 PLF PLF900 " PLF0 PLF00 PLF062 PLF0 t/00 Lbs (kg) R S FLNGE CLMP imensions R S llowable orque Ft-Lbs FLNGE CLMP S , , ,0, Note: hen used for mechanical supports, load capacities of brackets, fittings and other supporting elements should be in compliance with the merican Standard Code for Pressure Piping. Clamps are designed to be used with, M, S & HP Shape beams, Standard C & Misc. MC s, ngles & Structural ees. Clamps must be used in Unipier Solar Concrete serts Electrical Fittings Pipe/Conduit Supports General Fittings Nuts & Hardware elestrut 8" 8" Framing System 0