Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
|
|
|
- Eunice Barrett
- 6 years ago
- Views:
Transcription
1 Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and Specifications. Finishes and Special Materials (HDGC) is standard for all Superstrut beam clamps. The material is zinc coated after fabrication providing total product protection on all surfaces. The fabricated beam clamps are suspended and then dipped into tanks of hot zinc for a prolonged period, creating a coherent bond. Selected beam clamps can also be available in GoldGalv (no suffix) or Stainless Steel Type 316 (SS6C). Contact your Regional Sales Office for availability and minimum quantities. 24
2 for Mounting Channel U501, U502 HDG SS6C U504 U504HDG U504EG U504 U504SS6 U505 U505HDG U505EG U505 For Channel Size U501* /16 90 B1200 B1400 C1200 B1402 U502* / C1202 H1200 Furnished complete. Load U501 : 2150 U502 : 3000 U510 U510HDGC U510EG U510 U510SS6 Can be used with all channels U 512UHDG 512UEG 512U Can be used with all channels. 270 U514 U514HDGC U514EG U514 U514SS6 Load/ Channel /2 in. x 1-1/2 in. set screw included. Order separately one 1/2 in. x 1-1/2 in. hex head cap screw and 1/2 in. channel nut. 75 U514- U514-HDGC U514-EG U514- U514-SS6 Load/ Channel Order separately one 1/2 in. x 1-1/2 in. hex head cap screw and 1/2 in. channel nut. 26 U515 U515HDGC U515EG U515 U515SS6 3/8 in. x 1-1/2 in. set screw included. Load 750 /pair 40 U515B U515BHDG U515BEG U515B U515BSS6 1/2 in. x 1-1/2 in. set screw included. Load 1650 /pair 59 For all Series channel. 1/2 in. x 1-1/2 in. set screw included. Load For all B Series channel. 1/2 in. x 1-1/2 in. set screw included. Load EG(C) Electrogalvanized Materials (No suffix) GoldGalv 25
3 for Mounting Channel U520, U521, U522 U544 Single djusting Screw End Cap Set U544EG U543 djusting Screw End Caps U543HDG U543EG U543 Nuts, cap screws and set screws included. Flange Width U520* 2-3/8-4-1/2 8-3/ U521* 3-3/4-5-3/ U522* 5-5/8-7-5/8 11-7/ HDGC SS6C Should be ordered as one set. 39 U570-1, U570-2 HDGC Should be ordered in multiples of two (2). 44 F 9/16 in. Dia. Channel Series 597* F U570-1* 1-1/2 4 to U570-2* 1-1/2 7 to EG(C) Electrogalvanized Materials (No suffix) GoldGalv 26
4 for Hanging Rod U562 Beam Clamp U562HDG U562EG U562 U562SS6 Optional Use of U562HDG Beam Clamp E146 square nut order separately. 1/2 in. set screw included. 1/ For 20 swivel application use ES-145-1/2 nut. U563 Beam Clamp U563HDG U563EG U563 U563SS6 Optional Use of U563HDG Beam Clamp 1/2 in. set screw included. 1/ UM562 Beam Clamp UM562HDGC UM562EG UM562 UM562SS6 E146 square nut order separately. 1/2 in. set screw included. 1/ For 20 swivel application use ES-145-1/2 nut. US563 Beam Clamp with Swing Hanger US563HDG US563 US562 Beam Clamp with Swing Hanger US562HDG US562EG US562 1/2 in. set screw included. 1/ Square nut order separately. 3/8 in. set screw included. 3/8 in. set screw included. 3/8 in. set screw included. 3/ / / U569 Beam Clamp 570 Beam Clamp with Safety Rod U569HDG U569 Maximum flange width 5 in. 3/8 in. Flange width 4 in. min. - 8 in. max. For use with 3/8 in. rod see U /8 in. Size U569 3/ Size 570HDG 1/ EG(C) Electrogalvanized Materials (No suffix) GoldGalv 27
5 Superstrut for Hanging Rod U560 Heavy Duty Beam Clamp U564 Heavy Duty Beam Clamp B C Load, U560-1/4* 1/4 1/8 3/8 x 1-1/ U560-3/8* 3/8 1/8 3/8 x 1-1/ U560-1/2* 1/2 1/4 1/2 x 1-1/ U560-5/8* 5/8 1/4 1/2 x 1-1/ U568 Beam Clamp Safety Strap U568 Beam Clamp Safety Strap B C Load, U564-3/8* 3/8 1/8 3/8 x 2-3/ U564-1/2* 1/2 1/4 1/2 x 2-3/ U564-5/8* 5/8 1/4 1/2 x 2-3/ U568 Beam Clamp Safety Strap For U563 beam clamp. Beam Flange Width U568-1EG U568-2EG gauge material C775L / M775L Clamp with Lock Nut For U562 and UM562 beam clamp. Beam Flange Width U568-3EG U568-4EG U568-5EG gauge material For U560 and U564 beam clamp. Standard Finish - Electrogalvanized (EG) Malleable Iron (M775L) Carbon Steel (C775L) Beam Flange Width U568-6EG U568-7EG U568-8EG gauge material C775L B M775L C Pipe Dimensions Size B C Load, C775L-3/8EG 3/8 3/8 3/8 3/ C775L-1/2EG 1/2 3/8 3/8 3/ C775L-5/8EG 5/8 1/2 1/2 3/ C775L-3/4EG 3/4 5/8 5/8 3/ C775L-7/8EG 7/8 3/4 3/ M775L-3/8EG 3/8 3/8 3/4 1-3/ M775L-1/2EG 1/2 1/2 3/4 1-3/ M775L-5/8EG 5/8 5/8 3/ M775L-3/4EG 3/4 3/4 3/ Materials g EG(C) g Electrogalvanized (No suffix) g GoldGalv SS6(C) g Stainless Steel
6 for Hanging Rod 500SC, 502, 503SC, 507, 508, 509, 510, 511 Standard Finish - Electrogalvanized (no suffix) Tapped Holes Base Dim. B Jaw Opening De sign Load/ 500SC 1/ /4 15/ / SC 1/ /8 2-1/ / /2 2-3/8 1-3/ / /2 2-3/8 2-1/ /4 15/ / /32 1-1/8 5/ /32 1-1/8 5/ H Series in combination with 500 Series Beam Clamp Conduit and Pipe Hanger Features ccommodates 1/2 in. through 4 in. EMT or rigid conduit Can be used for either vertical or horizontal installation 6H-TB Series is threaded so there are less parts to handle or drop Installs easily with a screwdriver 6H Series without bolt Fig. 1 6H-B Series with bolt and hex nut Fig. 2 6H-T Threaded Series threaded without bolt Fig. 3 6H-TB Threaded Series threaded with bolt Fig.4 Without Bolt With Bolt EMT Rigid Conduit or Pipe Fig. No. Fig. No. 6H0 1 6H0-B 2 6H0-T 3 6H0-TB 4 1/2 3/8-1/2 6H1 1 6H1-B 2 6H1-T 3 6H1-TB 4 3/4 3/4 6H2 1 6H2-B 2 6H2-TB H2 1/2 1 6H2 1/2B 2 6H2 1/2-TB 4 1-1/4-6H3-SC 1 6H3-B 2 6H3-TB 4 1-1/2 1-1/4 6H4 1 6H4-B 6H4-TB /2 6H5 1 6H5-B 2 6H5-TB H6 1 6H6-B 2 2-1/2 2-1/2 6H7 1 6H7-B H8 1 6H8-B 2 3-1/2 3-1/2 6H9 1 6H9-B Standard Finish - Electrogalvanized (no suffix). Use SS suffix for Stainless Steel. Load rating: 500 with a safety factor of 3. (For weight per 100 see page 38.) Qty. per Box
7 Superstrut for Mounting Pipe and Conduit U571, U572 Conduit Clamp For attaching 1/2 in. thru 1-1/2 in. conduit to beam, channel, angle or column. Secures conduit to the support parallel or at right angles to it. 5/16 in. set screw 12 gauge material 38 Conduit Size Max. Flange Thickness U571 1/2 1 3/4 3/4 1 1/2 U572 3/4 1-1/ /4 1-1/ /2 5/8 Dim. 1-3/ /2 59 Pipe Supports Type RC and RCS Type EC Type PC Malleable Iron For mounting pipe or conduit at right angles to the beam Use SS316 suffix for 316 Stainless Steel Use HDG suffix for Malleable Iron For mounting pipe or conduit vertically across the beam Use HDG suffix for CS Certified Malleable Iron For mounting pipe or conduit parallel to the beam Use HDG suffix for Pipe Supports Three types of pipe clamps are available to provide right angle, vertical and parallel attachment to a beam. Types RC, EC and PC are malleable iron clamps with an edge that grips the structural member for maximum holding power when tightened. Type RCS clamps are all steel, providing two bearing surfaces for strong attachment for mounting pipe or conduit at right angles to the beam. ll parts are electrogalvanized (no suffix) including the threads. The clamps are designed for clamping to a wide variety of beam thicknesses and tapers. Can be installed using only a wrench. and Size O.D. of Conduit or Pipe Nom. Conduit or Pipe Size Std. Ctn. RCS-3/ /8 31 RCS-1/ /2 34 RCS-3/ /4 39 RCS RCS-1-1/ /4 43 RCS-1-1/ /2 60 RCS RC-1/ /2 36 RC-3/ /4 43 RC RC-1-1/ /4 51 RC-1-1/ /2 54 RC-2-SC RC-2-1/ /2 107 RC RC-3-1/ /2 134 RC-4-SC EC-1/ / EC-3/ /4 78 EC EC-1-1/ / EC-1-1/ /2 112 EC EC-2-1/ / EC PC-3/ /8 32 PC-1/ / PC-3/ /4 53 PC PC-1-1/ /4 79 PC-1-1/ / PC PC-2-1/ /2 148 PC PC-3-1/ / PC
8 Beam Fittings C781 Square Washer B EDG SS6 M742R Ceiling Flange B Used for beam applications. For channel applications use B241. Rod Size Hole Size Overall Dimensions C781-3/8* 3/8 7/16 3x3x3/16 27 C781-1/2* 1/2 9/16 3 x 3 x 3/16 27 C781-5/8* 5/8 11/16 3x3x1/4 47 C781-3/4* 3/4 13/16 3x3x1/4 42 C781-7/8* 7/8 15/16 4x4x 3/8 85 C781-1* 1 1-1/8 4x4x 3/8 160 M742R-3/8* 3/8 16 M742R-1/2* 1/ Side Beam Hanger Clip 542 Side Beam Hanger Clip S541 Swing Connector B 3/8 in. x 1-3/4 in. bolt, nut and clevis included. Cat. No. B C D 540-3/8* 7/16 1-7/8 1/4 7/ /2* 9/16 1-7/8 1/4 1-5/ /8* 11/16 2-1/2 3/ /4* 13/16 2-1/2 3/ Load/ 542-3/8 3/ /2 1/ For 3/8 in. and 1/2 in. rods. S541-3/8 3/8 31 For use with wood beam. (No suffix) GoldGalv Materials EG(C) Electrogalvanized B Bare 31
9 U577 Clevis and Swing Connector Beam Fittings U576 Hanger Clevis U579 Ceiling Flange U577-1/2 1/2 69 For use with wood beam. Hole Material Thikness B U576-3/8 7/16 3/16 27 U576-1/2 9/16 For rods up to 1/2 in. Mounting holes 7/16 in. di am e ter. For use with wood beam. U579-3/8 3-1/2 30 U579-1/2 4-1/4 50 Malleable Iron Nuts and wood screws not included. Mounting holes 13/32 in. (No suffix) GoldGalv Materials EG(C) Electrogalvanized B Bare 32
Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
Cat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
Beam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
Superstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
Copper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
Tel: +44 (0)
4 Lindapter s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended
Max. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
Superstrut. Metal Framing. Table of Contents
Table of Contents Finishes and Materials...A2 Channels and Concrete Inserts...A3 A7 Threaded Products and Hardware...A8 A12 Fittings and Brackets...A13 A23 Beam Clamps...A24 A32 Pipe Straps, Pipe Clamps
AURORA BRAND Pipe Hangers and Supports
AURORA BRAND Pipe Hangers and Supports SCHEDULE: H-2015-1 EFFECTIVE: November 15 2015 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151
SWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
Transmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
Superstrut. Metal Framing. Table of Contents
Table of Contents Finishes and Materials...A2 Channels and Concrete Inserts...A3 A7 Threaded Products and Hardware...A8 A12 Fittings and Brackets...A13 A23 Beam Clamps... A24 A32 Pipe Straps, Pipe Clamps
AURORA BRAND Pipe Hangers
AURORA BRAND Pipe Hangers SCHEDULE: H-2017 EFFECTIVE: March 6 and Supports 2017 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 4151 North
$50.00 net All prices are each. Taxes extra as applicable Our plant, stocking warehouse.
AURORA BRAND Pipe Hangers SCHEDULE: H-2010 EFFECTIVE: 5-Apr and Supports 2010 Subject to change without notice. GENERAL NOTES MINIMUM INVOICE: S: F.O.B. : PAYMENT TERMS: OTHER TERMS: ONTARIO 1387 Cornwall
Section Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
P2784 3" (76.2) (31.8) 25 to 45 PFL2-37
P289 (2.0) (.) 2 (.2) 2 (2.4) 2 (.2) hreaded esign (Safety Factor of 4) (angles 2 ) - 0 Lbs (2.4 kn) ) - 0 Lbs (.4 kn) Safety Factor 4 orque: Ft-Lbs (8 N m) PFL2- to (.2 to 9.) 2 2 2 2 to 4 t/00 : Lbs
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information
Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...
content Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
Conduit End Bells...EA1 Hex Reducing Bushings...EA2 Conduit Hubs...EA3-EA4. Split Couplings...EA5 Three Piece Couplings...EA6 Conduit Nipples...
SECTION E INDEX Product Description Page Number Conduit End Bells.......................................EA Hex Reducing Bushings..................................EA2 Conduit Hubs......................................EA-EA4
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
TABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
PRODUCT CATALOG Meadowview Rd Junction City, OR fax
Made in the USA, since 1972 PRODUCT CATALOG Nichols Manufacturing 292 Meadowview Rd Junction City, OR 97448 541-485-60 sales@nicholsmanufacturing.com www.nicholsmanufacturing.com 122616 Nichols Manufacturing
Iberville. Commercial Grade Fittings EMT CI5410 / CI5432 CI5410IT / CI5432IT CI5404 / CI5408 CI5404IT / CI5408IT CI5004 (-IT) / CI5008 (-IT)
ommercial Grade Fittings Set-Screw Fittings I5404 / I5408 I5404IT / I5408IT I5004 (-IT) / I5008 (-IT) I5410 / I5432 I5410IT / I5432IT I5010 (-IT) / I5016 (-IT) Regular Insulated Set-Screw Fittings (Steel)
Tel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
Pole Line Hardware. Heavy-Duty Spool Rack (200 A) No. of Wires. Anti-Vibration Kit for Spool Rack. Heavy-Duty Spool Rack (400 A) No.
Heavy-Duty Spool Rack (200 A) SS401E - SS802E - SS803E - SS804E No. of Wires Overall Length SS401E 1 9-1/2 300 136.3 10 SS802E 2 17-1/2 520 236.3 SS803E 3 25-1/2 780 354.5 5 SS804E 4 33-1/2 1040 472.7
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
Kindorf. With Right Angle, you get Flexibility Simplicity Economy! Right Amite Angle Slotted Angle Systems. ThomasaBeits
Right Amite Angle Slotted Angle Systems With Right Angle, you get Flexibility Simplicity Economy! Create the support framing you need. Right Angle is manufactured from commercial-quality steel in three
Waterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
STEEL C-CLAMP WITH LOCKNUT
FIG. 250 STEEL C-CLAMP WITH LOCKNUT Function: Designed for attaching hanger rod to the bottom flange of a beam. The hanger rod should make contact with the beam flange to ensure full engagement. Material:
B3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
Part No. Thread Size B Design Load Approx. Wt./100 A in. (mm) Lbs. (kn) Lbs. (kg)
ttachments Fig. 3199R - eiling Flange Fig. 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER
In This Section. Hangers, Clamps and Spring Steel Fasteners. Steel City Hangers, Clamps and Spring Steel Fasteners E-1
In This Section Steel City Spring Steel Fasteners Overview...E-3 Beam and Purlin Clamps...E-4 E-9 Hangers...E-10 E-11 Conduit and Cable Supports...E-12 E-20 Stud Wall/Drywall Supports, Clips and Brackets...E-21
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
CATALOG. Kindorf metal framing system Metal framing channel and accessories
CATALOG Kindorf metal framing system Metal framing channel and accessories Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From
TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the
CONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
Hang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
Track Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
Architectural Cable Railing Products
Architectural Cable Railing Products August 1, 2017 ISO Certified U.S.A. Manufacturer www.ultra-tec.com TABLE OF CONTENTS ULTRA-TEC RAILING PRODUCTS Cable Type and Size... 3 Options for How to Receive
Steel City Hangers, Clamps & Fasteners
In this section... Steel City Hangers, Clamps & Fasteners Steel City Hangers, Clamps & Fasteners Overview... B-222 B-223 Beam and Purlin Clamps... B-224 B-229 Hangers... B-230 B-23 Conduit and Cable Supports...
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
APPENDIX FENCE GENERAL NOTES
APPENDIX FENCE GENERAL NOTES 1. Fabric: 9 gage, 2" mesh, knuckle top and bottom, placed on the outside of posts, single fabric width for the entire height. 2. All fencing to be standard galvanized finish.
CABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
Khathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
Pole Line Hardware. Heavy duty spool rack SS401E 1 9 1/ SS802E / SS803E /
Heavy duty spool rack CATALOGUE NUMBER OVERALL WEIGHT (100 pcs) STD NO. WIRES LENGTH (in.) lb kg PKG SS401E 1 9 1/2 300 136.3 10 SS802E 2 17 1/2 520 236.3 5 SS803E 3 25 1/2 780 354.5 5 SS804E 4 33 1/2
MPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
ASAP Sr. A Strap and Pole. Magic Christmas. Single Stage. Walter Monkhouse. Alexandria, La. Version 1.2.
ASAP Sr Single Stage A Strap and Pole Version 1.2 Walter Monkhouse Walter@MagicChristmas.org Magic Christmas Alexandria, La. Description The ASAP Sr, single stage, has the same concept as the ASAP Jr.
Concealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
MISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
E.M.T. Set-Screw Connectors. Technical Specifications
Set-Screw onnectors Regular Insulated I5404 (-IT) / I5408 (-IT) Steel Locknut I5004 (-IT) / I5008 (-IT) I5020 (-IT) / I5032 (-IT) I5410 (-IT) / I5432 (-IT) Steel Locknut I5010 (-IT) / I5016 (-IT) I5054
PRODUCT INFORMATION 0.145/0.130" 100 5,
PROUCT INFORMATION Fasteners.300" Head rive Pins rive pins with a.300" head are designed for permanently fastening a fixture to concrete, some types of concrete block, and A36 or A572 structural steel.
Cable Runway. Telco-Style Cable Runway. UL Classified Cable Runway
Cable Runway Universal-style 250 cable runway. The maximum load capacity when supported every 5 with minimal deflection is 132 Lbs/ft Welded steel tubing construction, individually boxed. Overall length
MEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
H HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
No. 412, 414, 416 Operations Manual
No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
HPH Series J-Hook Installation Instructions
HPH Series J- Installation Instructions 1 Mounting to a vertical surface: HPH16, HPH32, HPH48 and HPH64 Use a nail*, bolt* or screw* with a minimum head diameter of 0.329 (1-A) and an appropriate length
E-Z-Ground Grounding Connectors
2 2 2 4 9 6 7 6 0 9 4 8 4 Thomas & Betts offers its complete line of grid-ground compression connectors. Our E-Z-Ground connectors are designed for direct burial and offer a safe, efficient alternative
TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
TO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
CSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS
ED1300/1300F SERIES CONCEALED VERTICAL ROD DEVICE INSTALLATION INSTRUCTIONS Ver.2 1300 SERIES CONCEALED VERTICAL ROD DEVICE Top Strike Latch Screws Strike Screws Release Plunger Top Latch Plunger Screws
Rigid Line Components and Accessories
Rigid Line Components and ccessories Rigid Coaxial Line System Components and Installation ccessories enefits Superior engineering for excellent performance Superior materials for high durability merican
XL MAX. Suspension System Data Center Ceiling Solutions. Assembly and Installation Instructions
PRELUDE Top Lock XL MAX (4) #8 x 1/" Long Main Beam Sharp Point Truss Head Screws Suspension System Data Center Ceiling Solutions Assembly and Installation Instructions SYSTEM OVERVIEW The Prelude XL Max
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
Swivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
FUEL GAS PIPING SECTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section.
FUEL GAS PIPING SECTION 15355 PART 1 GENERAL 1.1 DESCRIPTION A. The provisions of SECTION 15010, MECHANICAL GENERAL REQUIREMENTS, apply to this section. B. This specification covers both interior and exterior
FIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
WADE 2-1. Universal Carrier. Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains.
Universal Carrier Exclusive Features of 400 Series Universal Carrier for Lavatories, Urinals, Drinking Fountains. The 400 series carrier accommodates most urinal, water-cooler or hanger plate lavatory
Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.
Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger
Swifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
Series 80 In-Line Mounted Centrifugal Pumps
Bulletin B-G Bell & Gossett Series In-Line Mounted Centrifugal Pumps Applications Hydronic Heating & Cooling Systems Industrial Process General Service Pressure Boosting Advantages Close Coupled Space
Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
Lengths [7] Ø.50 [13] [7] [13]
![Lengths [7] Ø.50 [13] [7] [13]](/thumbs/80/81567338.jpg "Lengths [7] Ø.50 [13] [7] [13]")
Dimensions in [ ] are in millimeters Standard (2 1 / 2 6 ) Standard (9 24 ).75 STEM.40 [10] EXTERNAL THREAD.61 [15] 1.00 [25] STEM STEM Ø.44 [11] Threaded-Stepped Shank Standard Stem Length Length (T)
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
RACO Commercial Fittings
06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B1 RACO Commercial Fittings 06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B2 B2 dbkbo^i=fkcloj^qflk=j=pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab déåéê~ä=fåñçêã~íáçå tüéå=óçì=åééç=íç=åçìéäéi=åçååéåíi
8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
Wire Mesh Cable Tray System for Channeling of Cable Wiring
Wire Mesh Cable Tray System for Channeling of Cable Wiring A Simple-to-Install basket for safe and proper installation of facility wiring in the ceiling and under the floor. Wall Mount Ceiling Mount s
SECTION CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP
1 1 1 0 1 0 1 0 1 SECTION 1 1 CHAIN LINK FENCING AND GATES AND SOFTBALL BACKSTOP BASED ON DFD MASTER SPECIFICATION DATED /01/ P A R T 1 - G E N E R A L SCOPE The work under this section shall consist of
POLE LINE HARDWARE POLE LINE HARDWARE. HI-LINE UTILITY SUPPLY CO. Phone: Fax:
146 MACHINE BOLTS w/ square nut Rolled threads; s six inches or longer have con-type points. Hot dip galvanized. 860412 3/8" 4.5" 3" 250 8706 6" 3" 100 8707 7" 3" 100 8708 1/2" 8" 4" 100 8710 10" 4" 50
REPAIR CLAMP PARTS H fax: MULTIPLIER
REPAIR CLAMP PARTS Part Number Component Description Model Number Product Size List Price Unit V001 Neoprene Sheet Gasket AS All Sizes Square Inch V002 Waffle Pattern Gasket (NBR) AS All Sizes Square Inch
Instructions and Parts List DR-12N Martin House
Form 36-99 Instructions and Parts List DR-N Martin House Note: It is necessary to install a post before house is put up, but the house can be assembled at any time. House parts Check parts against this
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SOLID PHENOLIC TOILET PARTITIONS 1080 DuraLine Series 1180 DuraLine Series Class-A Fire Rated IMPORTANT: Review these instructions thoroughly prior to installation. FLOOR ANCHORED
Techline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE