TOGGLE CLAMPS. Toggle Clamps

Transcription

1 Toggle lamps eavy uty lamps eavy uty am Push lamps ( Series) eavy uty am Swing lamps ( Series) eavy uty Magna Force am lamps ( Series) eavy uty Push-Pull lamps (P Series) eavy uty Vertical lamps (V Series) orizontal Latch lamps (L Series) Vertical am lamps (JV Series) TOL L MPS djustable Spindle ssemblies onversion hart Flush Mount old own orizontal old own Vertical Pull ction Squeeze ction Straight Line Vertical Pull ction

2 old own Vertical This light duty U-ar clamp accepts all 8-32 diameter spindles. It is supplied with a vinyl coated spindle assembly and washers. The vertical handle type is supplied with a blue vinyl handle. 11/64 I. L olding capacity: 100 lbs. max. Weight: 2.5 oz. andle moves 62, bar 116 U-ar: 5/16" height, 3/16" inside width orizontal spindle adjustment: 11/16" Spindle Thread: 8-32 * * * J F Part S.S. andle ar ase Number Part No. F J Type Type Type /8 5/8 2 1/8 5/8 15/16 3/16 3/16 1 Vertical U-ar Flange /16 7/8 2 1/8 5/8 3/16 3/16 3/16 1 Vertical U-ar Straight /4 5/8 2 1/8 5/8 15/16 3/16 3/16 1 Tee U-ar Flange /16 7/8 2 1/8 5/8 3/16 3/16 3/16 1 Tee U-ar Straight *Straight base type dimension Note: Width of tee handle is 1 5/8" U-ar models include 2 flange washers This small compact clamp is equipped with a blue vinyl T-shaped grip handle; ideal for moderate to light duty clamping. It is supplied with a vinyl coated spindle assembly with washer olding capacity: 150 lbs. Weight: 2 oz. andle moves 175, bar 92 U-ar: 5/16" height, 7/32" inside width orizontal spindle adjustment: 5/8" Spindle Thread: Spindle Number: /16" I. OLS FOR SRWS F Part S.S. Number Part No. F /32 17/32 2 1/4 17/32 5/8 1/4 1 1/32 Note: Width of tee handle is 1 1/16" For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

3 old own Vertical This clamp has a narrow bar with a stationary spindle that accepts all 1/4-20 diameter spindles. ach clamp is supplied with a neoprene tipped spindle assembly. The vertical handle type is supplied with a blue vinyl handle. olding capacity: 200 lbs. max. Weight: 6 oz. andle moves 60, bar 117 Solid ar: 3/8" height, 7/32" wide Spindle Thread: 1/4-20 * J 13/64 I. * F L Part andle ar ase Number F J Type Type Type /4 15/16 2 9/16 1/2 1 1/16 1/4 1/4 1 1/16 Vertical Solid Flange /16 1 1/8 2 9/16 1/2 1/4 1/4 1/4 1 1/16 Vertical Solid Straight /16 15/16 2 9/16 1/2 1 1/16 1/4 1/4 1 1/16 Tee Solid Flange /16 1 1/8 2 9/16 1/2 1/4 1/4 1/4 1 1/16 Tee Solid Straight *Straight base type dimension Note: Width of tee handle is 2 9/16" Solid arm models include a bolt retainer U-ar models include 2 flange washers This vertical clamp is equipped with a 1/4-20 spindle which has a tip, washers, and locknut for easy clamping. blue vinyl handle is included. ach clamp is supplied with a vinyl coated spindle assembly with washer. 13/64 I. L olding capacity: 250 lbs. Weight: 6 oz. andle moves 64, bar 104 U-ar: 3/8" height, 1/4" inside width orizontal spindle adjustment: 1 1/8" Spindle Thread: 1/4-20 Spindle Number: * J F * Part andle ar ase Number F J Type Type Type /16 3 1/2 1 1/16 1/4 1/4 1 3/4 Vertical U-ar Flange /8 3 1/2 9/32 1/4 1/4 1 3/4 Vertical U-ar Straight /16 1 1/8 3 1/2 9/32 1/4 1/4 1 3/4 Tee U-ar Straight /16 15/16 3 1/2 1 1/16 1/4 1/4 1 3/4 Tee U-ar Flange *Straight base type dimension Note: Width of tee handle is 2 9/16" Solid arm models include a bolt retainer U-ar models include 2 flange washers For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 143

4 old own Vertical This popular style of clamp includes solid bar and U-ar construction. ach clamp accepts all 5/16-18 diameter spindles. ach clamp is supplied with a neoprene tipped spindle assembly. The vertical handle type is supplied with a blue vinyl handle. K 9/32 I. L olding capacity: 500 lbs. max. Weight: 11 oz. andle moves 60, bar 100 Solid ar: 5/8" height, 1/4" wide U-ar: 5/8" height, 21/64" inside width orizontal spindle adjustment: 1 1/2" Spindle Thread: 5/16-18 * * * Part andle ar ase Number F J Type Type Type /8 1 1/4 4 3/ /16 1/ Vertical Solid Flange /16 1 9/16 4 3/4 1/4 5/ Vertical Solid Straight /16 1 1/4 4 3/ /16 1/ Tee Solid Flange /8 1 1/4 5 1/4 3/ /16 1/ Vertical Solid Flange /16 1 9/16 3 3/4 3/4 1/4 5/16 1/4 2 1/4 Tee Solid Straight /8 1 9/16 4 1/8 3/4 1/4 5/16 1/4 3 7/16 Vertical Solid Straight /16 1 9/16 4 1/8 3/4 1/4 5/16 1/4 3 7/16 Tee Solid Straight /16 1 1/4 4 1/8 3/ /4 5/16 1/4 3 7/16 Tee Solid Flange /8 1 1/4 4 3/ /16 1/ Vertical U-ar Flange /16 1 9/16 4 3/4 1/4 5/ Vertical U-ar Straight /16 1 1/4 4 3/ /16 1/ Tee U-ar Flange /8 1 1/4 5 1/2 3/ /16 1/ Vertical U-ar Flange /8 1 9/16 3 3/4 3/4 1/8 5/16 1/4 2 1/4 Tee U-ar Straight /16 1 9/16 4 7/16 3/4 1/8 5/16 1/4 3 3/4 Vertical U-ar Straight /8 1 9/16 4 7/16 3/4 1/8 5/16 1/4 3 3/4 Tee U-ar Straight /16 1 1/4 4 7/16 3/ /16 1/4 3 3/4 Tee U-ar Flange *Straight base type dimension. Note: Width of tee handle is 3 5/8". Solid arm models include a bolt retainer U-ar models include 2 flange washers J F For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

5 old own Vertical This large capacity clamp is available in solid bar and U-ar construction. It accepts all 3/8-16 diameter spindles. The solid bar clamp is supplied with a bolt retainer and neoprene tipped spindle assembly. The U-ar style is supplied with 2 flanged washers and the spindle assembly. The vertical handle type is supplied with a blue vinyl handle. * olding capacity: 750 lbs. max. Weight: 1 lb., 5 oz. andle moves 58, bar 106 Solid ar: 3/4" height, 5/16" wide U-ar: 3/4" height, 7/16" inside width orizontal spindle adjustment: 2 9/16" Spindle Thread: 3/8-16 * J 21/64" I. OLS FOR 5/16" SRWS F Part andle ar ase Number F J Type Type Type /4 1 11/16 5 1/2 1 1/4 1 25/32 21/64 3/8 3 19/32 Vertical Solid Flange /4 2 3/16 5 1/2 1 1/4 3/8 21/ /32 Vertical Solid Straight /4 1 11/16 5 1/2 1 1/4 1 25/32 21/64 3/8 3 19/32 Tee Solid Flange /8 2 3/16 5 1/2 1 1/4 3/8 21/ /32 Tee Solid Straight /4 1 11/16 5 1/2 1 1/4 1 25/32 21/64 3/8 3 17/32 Vertical U-ar Flange /4 2 3/16 5 1/2 1 1/4 3/8 21/ /32 Vertical U-ar Straight /4 1 11/16 5 1/2 1 1/4 1 25/32 21/64 3/8 3 17/32 Tee U-ar Flange /8 2 3/16 5 1/2 1 1/4 3/8 21/ /32 Tee U-ar Straight *Straight base type dimension. Note: Width of tee handle is 5". For accessories see page 159. For interchangeability with other toggle clamps, see page 182. This heavy duty clamp is available with solid bar and U-ar construction. It accepts all 1/2-13 diameter spindles. The solid bar model is supplied with a bolt retainer. The U-ar model is supplied with flanged washers. Spindle assembly must be ordered separately for both models. K Ø11/32" olding capacity: 1000 lbs. max. Weight: 2 lbs., 7 oz. andle moves 67, bar 120 Solid ar: 7/8" height, 3/8" wide U-ar: 7/8" height, 17/32" inside width orizontal spindle adjustment: 3 1/8" Spindle Thread: 1/2-13 * Part andle ar ase Number F J Type Type Type /4 1 25/32 3/8 3/8 5 Vertical Solid Flange /2 2 1/ /4 3/8 3/8 5 Vertical Solid Straight /4 1 25/32 3/8 3/8 5 Vertical U-ar Flange /2 2 1/ /4 3/8 3/8 5 Vertical U-ar Straight J * F For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 145

6 old own Vertical This is the largest capacity vertical style clamp. It s available in solid bar or U-ar construction and accepts all 5/8-11 diameter spindles. The solid bar is supplied with a bolt retainer. The U-ar is supplied with flanged washers. Spindle assembly must be ordered separately. ach model is supplied with a blue vinyl handle olding capacity: 1200 lbs. max. Weight: 5 lbs., 2 oz. andle moves 70, bar 140 Solid ar: 1 1/4" height, 3/8" wide U-ar: 1 1/4" height, 21/32" inside width orizontal spindle adjustment: 4" Spindle Thread: 5/8-11 1/2" I. OLS FOR 7/16" SRWS Part andle ar ase Number F J Type Type Type /8 3 1/ /4 1/2 1/2 5 7/8 Vertical Solid Flange / /4 1/2 5 7/8 Vertical Solid Straight /8 3 1/ /4 1/2 1/2 5 7/8 Vertical U-ar Flange / /4 1/2 5 7/8 Vertical Solid Straight For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

7 old own Vertical F K This clamp is available with a solid or U-ar model. It features both a horizontal and vertical mounting surface. neoprene tipped spindle assembly is included with both models. bolt retainer is furnished with the solid bar model. olding capacity: 220 lbs. max. U-ar: 5/8" height, 11/32" inside width Spindle Thread: 5/16-18 Part ar Wt Number F K Type (oz.) /2 6 1/16 2 3/4 5/ /8 1 1/2 2 1/2 2 U-ar /2 6 7/16 2 3/4 5/ /8 1 1/2 2 1/2 Solid 16 Solid arm models include a bolt retainer U-ar models include 2 flange washers For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 147

8 old own orizontal * * The small size of this clamp is ideal for jobs requiring minimal hold down force. vailable in solid or U-ar construction. ll models are supplied with nylon spindle assemblies and blue vinyl handles. olding capacity: 60 lbs. Weight: 1 oz. andle moves 80, bar 90 Solid ar: 3/32" height, 1/4" wide U-ar: 1/4" height, 3/16" inside width U-ar horizontal spindle adjustment: 3/8" Spindle Thread: 8-32 J F 11/64" x 17/64" OLON OLS FOR NO. 8 SRWS K I Part S.S. ar ase Number Part No. F J I K Type Type /4 13/32 2 3/4 5/8 5/8 5/32 5/32 11/16 Solid Flange /4 13/32 2 3/4 5/8 5/32 5/32 21/32 3/8 1/2 Solid 1/2 Flange-Left /4 13/32 2 3/4 5/8 5/32 5/32 21/32 3/8 1/2 Solid 1/2 Flange-Right /16 19/32 2 3/4 5/8 11/32 5/32 5/32 11/16 Solid Straight /4 5/ /32 5/8 5/8 5/32 5/32 11/16 U-ar Flange /4 5/16 2 3/4 5/8 5/32 5/32 21/32 3/8 1/2 U-ar 1/2 Flange-Left /4 5/16 2 3/4 5/8 5/32 5/32 21/32 3/8 1/2 U-ar 1/2 Flange-Right /16 1/2 2 21/32 5/8 11/32 5/32 5/32 11/16 U-ar Straight *Straight base type dimension Note: J dimension goes all the way to end of the U-ar models Solid arm models include a bolt retainer U-ar models include 2 flange washers * * This light duty clamp is designed with a large clearance area between the bar and handle when the clamps are in the full open position. blue vinyl handle is included. Includes vinyl coated spindle assembly. olding capacity: 150 lbs. Weight: 3 oz. andle moves 60, bar 90 U-ar: 3/8" height, 7/32" inside width orizontal spindle adjustment: 1 1/8" Spindle Thread: J F Part S.S. Number Part No. F J ase Type /32 3/4 4 3/8 17/32 11/16 5/32 1/8 1 5/8 Flange /4 13/16 4 3/8 17/32 3/8 5/32 1/8 1 5/8 Straight *Straight base type dimension Note: J dimension goes all the way to end of the U-ar models For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

9 old own orizontal This medium duty clamp is ideal for limited space applications. It is supplied with a neoprene tipped spindle assembly. 13/64 I. olding capacity: 200 lbs. Weight: 5 oz. andle moves 60, bar 90 U-ar: 1/2" height, 17/64" inside width orizontal spindle adjustment: 1 1/4" Spindle Thread: 1/4-20 * J * F Part S.S. ar ase Number Part No. F J Type Type / /16 1 1/16 7/8 3/16 17/64 2 1/4 U-ar Flange /64 1 1/4 5 7/16 1 1/16 15/32 3/16 17/64 2 1/4 U-ar Straight / /16 1 1/16 7/8 3/16 17/64 2 1/4 Soild Flange /64 1 1/4 5 7/16 1 1/16 15/32 3/16 17/64 2 1/4 Solid Straight *Straight base type dimension Solid arm models include a bolt retainer U-ar models include 2 flange washers For olding capacity: 200 lbs. Weight: 7 oz. andle moves 76, bar 92 U-ar: 1/2" height, 1/4" inside width orizontal spindle adjustment: 1 21/32" Spindle Number: These medium and large capacity clamps have a large clearance area between the bar and the handle when the clamps are in the fully open position. blue vinyl handle is included. * For olding capacity: 500 lbs. Weight: 16 oz. andle moves 62, bar 92 U-ar: 9/16" height, 11/32" inside width orizontal spindle adjustment: 1 13/32" Spindle Number: J F M M I. * Part ase Number F J K M Type / /32 1 1/32 1 3/32 23/32 7/32 3/32 2 3/8 1/4-20 7/32 Flange / / /32 1 1/32 1 7/32 13/16 9/32 3/32 2 9/16 5/ /4 Flange /16 1 3/ /32 1 1/32 23/32 7/32 3/32 2 3/8 1/4-20 7/32 Straight /8 1 1/2 7 13/32 1 1/32 13/16 9/32 3/32 2 9/16 5/ /4 Straight Solid arm models include a bolt retainer U-ar models include 2 flange washers For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 149

10 old own orizontal * * Similar to model 70240, except larger in overall size and capacity. Supplied with a neoprene tipped spindle assembly. J F olding capacity: 500 lbs. max. Weight: 9 oz. andle moves 65, bar 90 U-ar: 1/2" height, 21/64" inside width orizontal spindle adjustment: 1 3/8" Spindle Thread: 5/ /64" I. OLS FOR 1/4" SRWS Part ar ase Number F J Type Type /8 1 3/8 6 5/8 1 7/8 1/4 1/4 2 3/4 U-ar Flange /8 1 5/8 6 5/8 1 1/2 1/4 1/4 2 3/4 U-ar Straight *Straight base type dimension U-ar models include 2 flange washers * * This horizontal clamp is available with U-ar construction in a flanged or straight base. Supplied with a neoprene tipped spindle assembly. oth models supplied with a blue vinyl handle. olding capacity: 750 lbs. max. Weight: 1 lb., 8 oz. andle moves 55, bar 90 U-ar: 3/4" height, 7/16" inside width orizontal spindle adjustment: 2 1/4" Spindle Thread: 3/8-16 J F 21/64" I. OLS FOR 5/16" SRWS Part ar ase Number F J Type Type /2 1 3/4 10 1/4 1 5/8 1 5/8 5/16 5/16 4 1/8 U-ar Flange /16 2 3/8 10 1/4 1 5/8 7/8 5/16 5/16 4 1/8 U-ar Straight *Straight base type dimension U-ar models include 2 flange washers For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

11 Flush Mount This clamp can be flush mounted using the hex locknut or it can be mounted directly into tapped hole. ither mounting allows 360 clamp rotation. The clamp locks in forward or reverse position. It is furnished with the hex locknut and a blue vinyl handle. TRVL F olding Part Travel apacity Wt. Plunger Number F Thread (lbs) (oz.) Tapped /8 3/4 2 7/16 3/8 15/16 1/4 5/ /4-20 x 19/ /2 4 3/4 7/16 1 1/4 3/4-16 x 5/ /16-18 x /4 2 5/8 6 11/16 5/8 1 1/2 1/ x 7/ /8-16 x 1 1/4 Pull ction F 13/64" I. OLS FOR NO. 10 SRWS /2" 9/32" I 2 OLS FOR 1/4" SRWS 1/2" NRROW S The adjustable hook is ideal for latching, locking or fastening doors, fixtures, pressure vessels, covers, and hatches on storage tanks. The hook bar has a 4" pull and is threaded for convenient adjustment. This clamp is furnished with a blue vinyl handle. Note: Longer ook Lengths vailable Upon Request olding Part rawing apacity Wt. Number F Movement (lbs) (oz.) /16 3/4 8 5/16 3/4 1 3/8 5/ /16 3/4 8 5/16 1 1/2 5/ /8 1 13/ /4 1 1/8 2 3/8 1/2 6 1/ Note: is a narrow base 1/2" wide For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 151

12 Pull ction J K F 9/32" I. OLS FOR 1/4" SRWS Ideal for locking and fastening on fixtures. djustable stop permits positioning of handle to limit travel once the clamp is installed. 4" drawing movement valuable for a wide range of applications. M L olding Part apacity Wt. Number F J K L M (lbs) (oz.) /8 5 11/16 8 5/16 3/4 1 1/4 1 3/4 1/4 5/16 1/8 3/8 1 7/8 1 5/ /8 4 5/8 9 5/8 1 1/4 1 25/32 2 1/2 3/8 11/32 1/8 3/8 1 7/8 2 1/16 1, L P F J K M /32" I. OLS FOR 3/16" SRWS Q O R The Jergens Latch lamp is ideal for closure/release applications on covers, lids, doors, guards, and containers. The clamp's unique versatility is attributed to its adjustable U-ar design. The clamp is supplied with a T-andle vinyl grip and Latch Plate. N O * I O 17/64" I. OLS FOR 1/4" SRWS Part Number *djusts 1/2" S.S. Part No. * F (ia.) I J K L M (ia.) N O P Q R olding apacity (lbs) /32 15/ /32 5/8 3/4 3/16 1/16 3/16 1 3/32 M4 x.7 17/32 25/32 3/16 7/16 7/32 13/32 1/4 1 1/ /4 21/32 5 5/8 3/4 1 1/4 3/16 1/8 17/64 1 3/ /16 1 1/64 7/32 1/2 1/4 9/16 7/32 1 9/ /4 15/16 6 3/4 1 5/8 1 1/2 5/16 5/32 11/32 2 1/8 M8 x /16 1 1/2 11/32 3/4 3/8 3/4 3/8 2 3/ For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Wt (oz.) 152 Jergens, Inc S. Waterloo Road leveland, Ohio US

13 Vertical Pull ction M TR J F This clamp is for vertical locking applications, where it is preferable to mount the clamp on a lid. The U-bolt allows for easy adjustment and provide a positive connection with the latch plate (included). andle moves 145 Part U-olt Range U-olt Range Number F I J M / /8 15/16 1/2 7/8 7/16 1/4 1/4 3/16 3/16-1 3/32 7/ /16 1 5/ /32 1 7/32 3/4 1 1/8 9/16 5/16 3/8 1/4 9/32-1 3/8 1/ / /32-3 3/ /32 1/4 19/32 3/4 3/8 1/2 5/16 11/ /32 11/32 I M I. Part Thread olding Wt. Number Size apacity (lbs) (oz.) M4 x M6 x M8 x For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 153

14 Straight Line This straight-line extra heavy duty clamp is constructed of malleable iron castings and cold rolled steel. The pivot joints are stainless steel. The mounting base is precision machined for flatness. blue vinyl handle is included. J olding capacity: 500 lbs. Weight: 14 oz. Plunger travel: 1 3/16" Plunger tapped: 5/16-18 X 1 1/8" deep MOUNTIN OLS Part Mounting Number J oles /4 1 3/8 1 5/8 5/16 5/16 2 1/4 9/ /4 1 7/16 1 5/16 5/16 5/16 2 1/4 7/32 Same construction as with larger capacity. The base has 11/32" diameter holes for 5/16" screws. blue vinyl handle is included. olding capacity: 850 lbs. Weight: 1 lb., 4 oz. Plunger travel: 1 5/8" Plunger tapped: 3/8-16 X 1 1/8" deep J Part Number J /4 6 1/4 1 5/8 1 5/8 5/16 5/16 3 For accessories see page 159. For interchangeability with other toggle clamps, see page /32" I. OLS FOR 5/16" SRWS 154 Jergens, Inc S. Waterloo Road leveland, Ohio US

15 Straight Line J Same construction as with three times the holding capacity. Our most powerful straight line action toggle clamp. blue vinyl handle is included. olding capacity: 1500 lbs. Weight: 3 lb. Plunger travel: 2 11/32" Plunger tapped: 1/2-13 X 1 1/2" deep Part Number J /4 9 1/ /8 3/8 4 5/8 O M 11/32" I. OLS FOR 5/16" SRWS F N L K This light duty clamp is equipped with an 8-32 tapped plunger. blue vinyl handle is included. 3/16 I. 3/16" OLS I. FOR OLS FOR SRWS SRWS J olding capacity: 90 lbs. Weight: 1.5 oz. Plunger travel: 5/8" Plunger tapped: 8-32 X 15/32" deep I J Part Number F I J K L M N O / /32 1 1/16 1/2 15/32 1/4 7/32 5/16 5/8 3/ /32 13/16 1 9/32 7/16 For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 155

16 Straight Line This popular plunger style clamp can be used for push and pull clamping. The rivet in the handle can be removed allowing the clamp to be set in either the push or pull position. blue vinyl handle is included. olding capacity: 300 lbs. Weight: 10 oz. Plunger travel: 1 1/4" Plunger tapped: 5/16-18 X 1" deep J Part Number J /16 31/32 5 7/16 1 3/8 1 5/8 9/32 9/ /16 7/32" I. OLS FOR NO. 10 SRWS The heavy duty construction of the clamp is ideal for hard to hold applications. The plunger locks in both push and pull positions with maximum pressure. blue vinyl handle is included. olding capacity: 800 lbs. Weight: 1 lb., 12 oz. Plunger travel: 1 5/8" Plunger tapped: 3/8-16 X 1" deep J Part ase Number J Type /16 1 3/4 6 3/4 1 5/8 1 5/8 5/16 5/16 4 3/16 Flange 11/32" I. OLS FOR 5/16" SRWS For accessories see page 159. For interchangeability with other toggle clamps, see page Jergens, Inc S. Waterloo Road leveland, Ohio US

17 Straight Line The forged steel construction enables this powerful plunger-style clamp to perform on rugged, heavy duty applications. andle locks in both push and pull positions. blue vinyl handle is included. 11/32" I. OLS FOR 5/16" SRWS olding capacity: 2500 lbs. Weight: 2 lbs., 2 oz. Plunger travel: 2" Plunger tapped: 3/8-16 X 1 1/4" deep Part ase Number J Type /8 13/16 7 1/16 1 3/8 1 5/8 1/2 5/16 5 1/16 Flange J For accessories see page 159. For interchangeability with other toggle clamps, see page 182. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 157

18 Squeeze ction Forged Jaws - SPINL TR F These forged steel, squeeze action, plier clamps can be used in a wide range of applications. Ideal for clamping, fixturing, holding, processing, or positioning. ll models are supplied with spindle assemblies. 2 Spindle Version 2 Spindle olding Part Part apacity Spindle Trigger Wt. Number Number F (lbs.) Type Release (oz.) /16 2 1/16 4 1/2 1 1/8 1/ Standard No /8 2 13/ /4 5/ /4 350 Standard No /16 2 7/8 8 1/16 2 9/32 5/ /2 700 Standard Yes /16 4 1/4 8 1/2 2 3/4 3/ /4 700 Standard Yes /16 4 3/4 8 1/2 2 3/4 3/ Standard Yes 22 Note: F dimension will be less if spindle and locknut are used Supplied with Spindle ssembly Supplied with 2 Spindle ssemblies (Not Shown) Supplied with Spindle ssembly Supplied with 2 Spindle ssemblies (Not Shown) Supplied with Spindle ssembly Supplied with Spindle ssembly (not shown) Supplied with (2) Spindle ssembly Supplied with and Spindle ssemblies 158 Jergens, Inc S. Waterloo Road leveland, Ohio US

19 djustable Spindle ssemblies ex ead djustable Spindle ssemblies Vinyl oated ex ead djustable Spindle ssemblies Neoprene ap-flat Tipped djustable Spindle ssemblies Swivel Foot djustable Spindle ssemblies Flanged Washers for U-ar lamps Only Flanged Washers for U-ar lamps Part Number escription x 27/32 Nylon ex ead x 3/4 ex ead* /16-18 x 1 1/8 ex ead /16-18 x 1 3/4 ex ead /8-16 x 1 1/4 ex ead /8-16 x 3 ex ead /2-13 x 3 ex ead /8-11 x 4 1/2 ex ead x 1 1/4 Vinyl oated ex ead /4-20 x 1 1/2 Vinyl oated ex ead /4-20 x 1 3/4 Neoprene ap Flat Tipped /4-20 x 1 15/16 Neoprene ap Flat Tipped /16-18 x 2 1/4 Neoprene ap Flat Tipped /16-18 x 3 Neoprene ap Flat Tipped /8-16 x 3 1/4 Neoprene ap Flat Tipped x 1 3/8 Neoprene ap Flat Tipped /16-18 x 2 3/4 Swivel Foot /8-16 x 3 Swivel Foot *Nuts not included Part Number escription #8 For Vertical andle Models / / / / /8 olt Retainer olt Retainers For Solid ar lamps Part Number escription / / / /8 Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 159

20 V Series eavy uty Vertical lamps Features: ll V series clamps are designed to be adaptable and durable, and to withstand abuse in heavy duty applications. The V series have a phosphated corrosion resistant finish. Models V660WW, V1500WW, V2600WW and V5200WW comprise a basic toggle mechanism onto which can be welded at the desired angle the clamping arm and handle which can be specified as accessories. These models feature a swivel base which is welded at the desired angle to the mechanism, and then welded either directly to a fixture, or alternatively to a base which is offered as an accessory for bolt mounting. Models V660SW, V1500SW, V2600SW and - V5200SW share all the features of the above models, but with a straight base which can be directly bolt mounted or welded to a fixture, or alternatively to the accessory base for bolt mounting. Models V660SW, V1500SS, V2600SS and V5200SS are similar to the type T models, but with a handle with a PV grip fitted vertically, and a longer stub clamping arm which can be modified and the spindle retainer supplied welded in the desired position. Models V660SW, V1500F, V2600F and V5200F feature a flanged base with holes for bolt mounting, a handle with PV grip fitted vertically, and a fixed spindle or setscrew position which does not require welding. Specifications: The main components are of steel, the forked lower handles being precision alloy steel castings, and all axles of hardened steel running in either hardened bushes or directly in the close-toleranced holes of hardened parts. The clamps are finished chemi-black. Installation: When welding the swivel base of the Stub Nose models to the clamp mechanism ensure that the full length of the adjoining surfaces are welded. nsure that welding spatter does not enter the slots which form the forward stop of the mechanism. The handle pivot bolt may be adjusted if required to remove excess free play from the mechanism. Frequent lubrication will extend the life of the clamp. 160 Jergens, Inc S. Waterloo Road leveland, Ohio US

21 old own Vertical Model V660/WW rm: Stub nose for welded extension ase: Swivel for welding in the desired position Nominal olding Force: 660 lbs. Weight: 6 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 163 for accessories and handles. Model V660/SW rm: Stub nose for welded extension ase: Straight Nominal olding Force: 660 lbs. Weight: 6 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 163 for accessories and handles Model V660/FW rm: Stub nose for welded extension ase: Flanged Nominal olding Force: 660 lbs. Weight: 7 oz. See page 163 for accessories and handles Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 161

22 old own Vertical Model V660/S rm: The spindle is adjustable along the arm ase: Straight Nominal olding Force: 660 lbs. Weight: 9 oz. Supplied complete with: Set screw & nuts, Flanged washer See page 163 for accessories and handles Model V660/F rm: The spindle is adjustable along the arm ase: Flanged Nominal olding Force: 660 lbs. Weight: 9 oz. Supplied complete with: Set screw & nuts, Flanged washer See page 163 for accessories and handles Model V660/F2 rm: The spindle is adjustable along the arm ase: Flanged Nominal olding Force: 660 lbs. Weight: 9 oz. Supplied complete with: Set screw & nuts, Flanged washer See page 163 for accessories and handles Jergens, Inc S. Waterloo Road leveland, Ohio US

23 old own Vertical V660 Series ccessories Part No andle: For welding at the desired angle to V660/WW & V660/SW Weight: 2 oz. Part No rip: To fit Part No handle Weight: 0.5 oz. Part No rm: For extending the stub arms of V660/WW & V660/SW Weight: 3 oz. Part No ase: For bolt mounting V660/WW & V660/SW Weight: 2 oz. Model V1500/WW rm: Stub nose for welded extensions ase: Swivel for welding in the desired position Nominal olding Force: 1,543 lbs. Weight: 1lb 7 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 164 for accessories and handles Model V1500/SW rm: Stub nose for welded extensions ase: Straight Nominal olding Force: 1,543 lbs. Weight: 1lb 9 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 164 for accessories and handles Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 163

24 old own Vertical Model V1500/SS rm: Solid arm ase: Straight Nominal olding Force: 1,543 lbs. Weight: 2 lbs 5 oz. Supplied complete with: Spindle retainer, Setscrew & nuts See below for accessories and handles Model V1500/F rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 1,543 lbs. Weight: 2 lbs 9 oz. Supplied complete with: Setscrew & nuts See below for accessories and handles V1500 Series ccessories Part No andle: For welding at the desired angle to V1500/WW & V1500/SW Weight: 5.3 oz. Part No rip: To fit Part No handle Weight: 0.3 oz. Part No rm: For extending the stub arms of V1500/WW & V1500/SW Weight: 5.5 oz. Part No ase: For bolt mounting VV1500/WW & V1500/SW Weight: 3 oz. 164 Jergens, Inc S. Waterloo Road leveland, Ohio US

25 old own Vertical Model V2600/WW rm: Stub nose for welded extensions ase: Swivel for welding in the desired position Nominal olding Force: 2,646 lbs. Weight: 2 lbs 10 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 166 for accessories and handles Model V2600/SW rm: Stub nose for welded extensions ase: Straight Nominal olding Force: 2,646 lbs. Weight: 3 lbs 2 oz. See Features and Installation Information on page 160 for Installation Instructions See page 166 for accessories and handles. Model V2600/SS rm: Solid arm ase: Straight Nominal olding Force: 2,646 lbs. Weight: 4 lbs. Supplied complete with: Spindle retainer, Setscrew & nuts See page 166 for accessories and handles Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 165

26 old own Vertical Model V2600/F rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 2,646 lbs. Weight: 4 lbs 4 oz. Supplied complete with: Setscrew & nuts See below for accessories and handles V2600 Series ccessories Part No andle: For welding at the desired angle to V2600/WW & V2600/SW Weight: 8 oz. Part No rip: To fit Part No handle Weight: 0.3 oz. Part No rm: For extending the stub arms of V2600/WW & V2600/SW Weight: 11 oz. Part No ase: For bolt mounting V2600/WW & V2600/SW Weight: 4 oz. 166 Jergens, Inc S. Waterloo Road leveland, Ohio US

27 old own Vertical Model V5200/WW rm: Stub nose for welded extensions ase: Swivel for welding in the desired position Nominal olding Force: 5,291 lbs. Weight: 6 lbs 4 oz. See Features and Installation Information on page 160 for Installation Instructions. See page 168 for accessories and handles. Model V5200/SW rm: Stub nose for welded extensions ase: Straight Nominal olding Force: 5,291 lbs. Weight: 7 lbs 1 oz. See Features and Installation Information on page 160 for Installation Instructions See page 168 for accessories and handles. Model V5200/SS rm: Solid arm ase: Straight Nominal olding Force: 5,286 lbs. Weight: 8 lbs 3 oz. Supplied complete with: Spindle retainer, Setscrew & nuts See page 168 for accessories and handles Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 167

28 old own Vertical Model V5200/F rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 5,286 lbs Weight: 9 lbs. Supplied complete with: Setscrew & nuts See below for accessories and handles V5200 Series ccessories Part No andle: For welding at the desired angle to V5200/WW & V5200/SW Weight: 10.3 oz. Part No rip: To fit Part No handle Weight: 4 oz. Part No rm: For extending the stub arms of V5200/WW & V5200/SW Weight: 1 lb 8 oz. Part No ase: For bolt mounting V5200/WW & V5200/SW Weight: 7 oz. 168 Jergens, Inc S. Waterloo Road leveland, Ohio US

29 Vertical am lamps Features: am clamps are similar to vertical clamps but the clamping force is generated not by a toggle linkage, but by the action of a roller on a cam. The cam action allows components of differing thickness to be clamped without readjustment of the clamping spindle. Specifications: The main components are of zinc plated and passivated steel, the cam and its roller being case hardened to resist wear. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of models JV550/FF and JV770/FF rotating in hardened bushes. The setscrews are made of steel. Model JV155/FF can clamp parts with thickness varying by up to 1/16", and models JV550/FF and JV770/FF thickness varying by up to 5/64". comfortable, cushioned PV handle grip is fitted to all three models of cam clamp. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 169

30 Vertical am lamps Model JV/155/FF rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 165 lbs. Weight: 1.3 oz. Supplied complete with: Setscrew & nuts Model JV550/FF rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 550 lbs. Weight: 9 oz. Supplied complete with: Setscrew & nuts Model JV770/FF rm: The spindle is in a fixed position ase: Flanged Nominal olding Force: 770 lbs. Weight: 1 lb 6 oz. Supplied complete with: Setscrew & nuts Jergens, Inc S. Waterloo Road leveland, Ohio US

31 eavy-uty & Long-andled Push-Pull lamps Low profile handle eavy duty link Ribbed housing povides extra protection against side impact Locks in both foward and rear position Features: These clamps are of exceptionally robust construction featuring cast and machined handles and bases. The clamps are designed with a low plunger height and with the mechanism guarded within the base to avoid finger traps. Models P1300, P2600, P5500, and P11000 have handles of normal length for clamping. The long handled L versions (P1300/L, P5500/L, and P11000/L) have their handles either to the front or rear of the clamp according to the application and produce high forces which make them suitable for clamping or for light work such as swaging, rivetting, press fitting components, etc. ll models are fitted with a comfortable, cushioned PV handle grip. Specifications: The bases of all models, and the handles of models P1300, P2600, P5500, and P11000 are machined cast iron. The handles of the L versions are of steel bar and mount in housings which are either machined steel castings or machined from steel bar. The plungers are of steel, and their precision ground diameter runs in a close-toleranced hole in the base casting. ll axles are of hardened steel and run in either the cast iron of the handle, or in the close-toleranced holes of hardened parts. ll models are supplied with a steel setscrew. Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 171

32 eavy-uty & Long-andled Push-Pull lamps Model P1300 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 1,322 lbs. Weight: 1 lb Supplied complete with: Setscrew & nut Model P2600 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 2,643 lbs. Weight: 3 lbs Supplied complete with: Setscrew & nut 172 Jergens, Inc S. Waterloo Road leveland, Ohio US

33 eavy-uty & Long-andled Push-Pull lamps Model P5500 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 5,507 lbs Weight: 8 lbs Supplied complete with: Setscrew & nut Model P11000 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 11,013 lbs Weight: 13 lbs 6 oz. Supplied complete with: Setscrew & nut Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 173

34 eavy-uty & Long-andled Push-Pull lamps Model P1300/L With 31 lbs handle force the output force is: lbs Fully retracted 1, extended ,, ,, ,, ,, ,, ,, 419 Fully extended 1,277 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 1,322 lbs Weight: 1 lb 2 oz. Supplied complete with: Setscrew & nut Model P2600/L With 33 lbs handle force the output force is: lbs Fully retracted 1, extended ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, 639 Fully extended 2,048 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 2,643 lbs Weight: 3 lbs 6 oz. Supplied complete with: Setscrew & nut 174 Jergens, Inc S. Waterloo Road leveland, Ohio US

35 eavy-uty & Long-andled Push-Pull lamps Model P5500/L With 37 lbs handle force the output force is: lbs Fully retracted 2, extended ,, ,, ,, ,, ,, ,, ,, ,, 778 Fully extended 2,423 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 5,507 lbs. Weight: 9 lbs 1 oz. Supplied complete with: Setscrew & nut Model P11000/L With 44 lbs handle force the output force is: lbs Fully retracted 2, extended ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, ,, 991 Fully extended 2,665 Plunger: Locks at both extended & retracted ends of the stroke ase: ody mounting Nominal olding Force: 11,013 lbs. Weight: 15 lbs 6 oz. Supplied complete with: Setscrew & nut Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 175

36 orizontal Latch lamps Features: Latch clamps are available in two sizes. racket holes will not elongate over time. They have a small footprint for space constrained applications. ll latch clamps are fitted with PV handle grips. Specifications: The L Series clamps have precision cast steel bases and latch brackets with cast iron handles. The finish is black oxide. Installation: It is important that the clamp and latch bracket are in alignment when viewed from both the top and the side to ensure that the clamp locks over center correctly. The U bolt should be adjusted to ensure an equal pull on either side. orizontal Latch lamps Model L4400 Nominal olding Force: 4,405 lbs Weight: 3 lbs 1 oz. Supplied complete with: Latch racket as shown Model L8800 Nominal olding Force: 8,811 lbs Weight: 5 lbs 9 ozs. Supplied complete with: Latch racket as shown Jergens, Inc S. Waterloo Road leveland, Ohio US

37 Magna Force eavy uty am lamps Unique, patented range of cam clamps Rugged build quality, ideal for machine shops lamping forces from 660 lbs to 11,000 lbs Significant cost benefits over strap clamps in repetitive machining fraction of the cost of hydraulic workholding Phone: 866-KWIK-LOK ( ) Fax: mail: 177

38 eavy uty am lamps Model 8800R (lockwise) 8800R (ounter lockwise) Operating clamping force: 1,680 lbs (hand applied), 9,000 lbs (mallet applied) Weight: 1.21 lbs Model 11000R (lockwise) 11000R (ounter lockwise) Operating clamping force: 1,900 lbs (hand applied), 11,240 lbs (mallet applied) Weight: 2.9 lbs Part pplied andle lamping lamping Force aylight lamping Number Force (and Push) Force using Mallet lows Travel Travel lbs 1686 lbs 8992 lbs lbs 1686 lbs 8992 lbs lbs 1910 lbs lbs lbs 1910 lbs lbs Jergens, Inc S. Waterloo Road leveland, Ohio US

39 eavy uty am Swing lamps Model 675S (lockwise) 675S (ounter lockwise) Operating clamping force: 675 lbs (hand applied) Weight: 0.4 lbs Supplied complete with: Set screw & nuts Model 1800S (lockwise) 1800S (ounter lockwise) Operating clamping force: 1,120 lbs (hand applied), 1,800 lbs (mallet applied) Weight: 0.9 lbs Supplied complete with: Set screw & nuts Part pplied andle lamping lamping Force aylight lamping Number Force (and Push) Force using Mallet lows Travel Travel lbs 674 lbs N/ lbs 674 lbs N/ lbs 1124 lbs 1800 lbs lbs 1124 lbs 1800 lbs Phone: 866-KWIK-LOK ( ) Fax: mail: 179

40 eavy uty am Swing lamps Model 2600S (lockwise) 2600S (ounter lockwise) Operating clamping force: 1,350 lbs (hand applied), 2,700 lbs (mallet applied) Weight: 2 lbs Supplied complete with: Setscrew & nuts eavy uty am Push lamps Model 3300P Operating clamping force: 3,370 lbs (mallet applied), 1,350 lbs (hand applied) Weight: 0.6 lbs Supplied complete with: Set screw & nuts, Mounting base and locknuts Model 4400P Operating clamping force: 4500 lbs (mallet applied), 1,460 lbs (hand applied) Weight: 1.3 lbs Supplied complete with: Set screw & nuts M24 Mounting base & locknuts Part pplied andle lamping lamping Force aylight lamping Number Force (and Push) Force using Mallet lows Travel Travel lbs 1350 lbs 2700 lbs lbs 1350 lbs 2700 lbs lbs 1350 lbs 3370 lbs lbs 1460 lbs 4500 lbs Jergens, Inc S. Waterloo Road leveland, Ohio US

41 eavy uty am Push lamps Model 6750P Operating clamping force: 6,750 lbs (mallet applied), 1,460 lbs (hand applied) Weight: 3.4 lbs Supplied complete with: Set screw & nuts. Mounting base & locknuts Model 3300PL Operating clamping force: 3,370 lbs Weight: 0.8 lbs Supplied complete with: Set screw & nuts, Mounting base & locknuts Model 4400PL Operating clamping force: 3,820 lbs Weight: 1.7 lbs Supplied complete with: Set screw & nuts Mounting base & locknuts, Nominal holding force: 4,500 lbs Part pplied andle lamping lamping Force aylight lamping Number Force (and Push) Force using Mallet lows Travel Travel lbs 1460 lbs 6750 lbs lbs 3370 lbs N/ lbs 3820 lbs N/ Phone: 866-KWIK-LOK ( ) Fax: mail: 181

42 eavy uty am Push lamps Model 6750PL Operating clamping force: 4,500 lbs Weight: 4.4 lbs Supplied complete with: Set screw & nuts, Mounting base & locknuts Nominal holding force: 6,740 lbs Part pplied andle lamping lamping Force aylight lamping Number Force (and Push) Force using Mallet lows Travel Travel lbs 4,500 lbs N/ onversion hart s Jergens arr Lane Jergens arr Lane Jergens arr Lane Jergens arr Lane L-150-TP L-250-TP L-350-TP L-150-T L-153-T L-151-T L-250-T L-253-T L-251-T L-350-T L-351-T L-450-T L-451-T L-260-T L-550-T L-551-T L-200-VT L-475-T L-150-VT L-151-VT L-152-VT L-250-VT L-251-VT L-252-VT L-253-VT L-350-VT L-351-VT L-352-VT L-353-VT L-450-VT L-451-VT L-452-VT L-453-VT L-550-VT L-551-VT L-552-VT L-650-VT L-651-VT L-652-VT L-750-VT L-850-VT L-950-VT L-1050-VT L-150-P L-170-P L-100-P L-200-P L-300-P L-310-P L-250-P L-352-PL-S L-251-P L-50-PL L-150-PL L-254-PL L-200-VT-S L-751-VT L-851-VT L-375-T L-350-P L-100-P-S L-110-P L-50-PL L-254-PL L-454-PL L-100-P L-50-SP L-150-SP L-200-P L-250-SP L-300-P L-210-P L-350-SP L-152-T L-250-T-S L-252-T L-260-T-S L-350-T-S L-300-T L-151-VT-S Jergens, Inc S. Waterloo Road leveland, Ohio US

43 onversion hart s Jergens e-sta-o Jergens e-sta-o Jergens e-sta-o Jergens e-sta-o TU T S USS U T S U SL U TU S TU U TS UL L U TL U TL U TU U UL U TUL U TUL U TS U TU U S U U U U T S MSS T U S S SR TS USS L UR U USS U U TU USS UL USS S S S S TS U U U U SS SS Phone: 866-KWIK-LOK ( ) Fax: mail: fasteners@jergensinc.com 183

44 onversion hart s Jergens ood and Jergens ood and Jergens ood and Jergens ood and SS JS J L I L I I I I T F SS U R SS R SS S SI SS IT Jergens, Inc S. Waterloo Road leveland, Ohio US