Universal Bracketing System

Transcription

1 Universal racketing System Unique Patented. Pre-loaded, multi-size Touchown clamps Versatile djustable or fixed-length bracket options with a full line of accessories and universal adjustability to accommodate just about any residential or commercial installation Reliable Made in the US with the highest quality domestic materials available and backed by a 25-year warranty Supply rainage Support

2 djustable racket Powerar is an affordable alternative to cutting wood blocks and metal studs for securing and supporting stub outs, shower valves/shower tree assemblies and water supply lines throughout rough-in phases of residential and commercial construction. Fully adjustable brackets to fit stud bays or joist cavities measuring between 9" 16" and 14" 26" wide Optional pre-loaded Touchown clamps Ratcheting bridge secures 1/4" 1" TS Pilot holes to easily fasten clamps or fittings to the bracket exterior TPE ase insert reduces noise transfer and is compatible with copper, PEX or PV. When top bridge is installed and compresses on tube, the clamp's position within the bracket channel is locked in place High quality 20-ga. steel (STM 653) ual fastening tabs on each end to properly secure the bracket to the stud 1 2 wood metal 3 4 stud stud 1. djust to fit stud cavity. 2. Secure all four tabs to wood or metal studs. 3. Move Touchown clamps to proper location. 4. Ratchet bridge over tube/pipe. e sure to bow the bridge. ESRIPTION 16" STU YS 24" STU YS Outer/inner bracket length 9" 14" racket height 0.529" 0.529" racket width 0.602" 0.602" Tab length 1" 1" E racket span load ratings 9" = 90-lbs. 14" = 150-lbs. 12" = 82-lbs. 17" = 115-lbs. 15" = 66-lbs. 21" = 80-lbs. 24" = 45-lbs. 1 lways visit for up-to-date prices

3 Made from durable nylon, Touchown Universal Pipe lamps are compatible with copper, PEX or PV with a releasable locking mechanism for variable clamping tension that allows for thermal expansion. Touchown clamps are preloaded into the Powerar to reduce installation time. lamp height 1-7/8" lamping range 1/4" 1-1/8" lamp width 1-7/8" ridge width 2.02" E Load rating 70-lbs. H F G T+ Universal Pipe lamps are an upgrade to the Touchown II predecessor. The clamps are compatible with copper, PEX and PV with a releaseable top bridge for variable clamping tension allowing for thermal expansion. Install T+ directly to Powerar brackets, studs or joists. Maximum pipe size is 2" Schedule 40. or E lamp width 2.875" lamp height 4.67" lamp depth 0.825" lamp range 0.240" 3.285" E lamp range w/ acoustical cushions 0.240" 3.085" F ridge width 3.8" G ridge depth 0.825" H ridge height 0.778" J Temperature & load ratings -10 F 130 F = 150-lbs. 131 F 180 F = 105-lbs. 181 F 220 F = 70-lbs. The SaddleUp galvanized clamp threads over the exterior of the Powerar bracket and is available with or without a stainless steel band for supporting larger diameter tube/pipe. Length 2.625" Height 0.875" iameter.400" Width 1.0" 2

4 ZipStrap is ideal for bundling and organizing multiple lines on the job. It secures easily to a Powerar with one screw and features a releasable locking strap for large O.. pipe or conduit. Strap capacity 0.875" 6.875" Strap width 0.75" Load rating 25-lbs. WV The ombosaddle is specifically designed to attach to the Powerar bracket. Ideal for centering waste or vent pipes between joists or studs. Each ombosaddle fits two different pipe sizes and can be glued directly to the pipe with multi-purpose glue. Saddle clamp base height.80" lamping range 1.88" 3.5" Vinyl-oated Steel lamp Versatile alternative when metal clamps are preferred over plastic. vailable size options range from 3/8" through 1" TS. Note: Vinyl oated lamps are not PV compatible. ESRIPTION lamp capacity 0.375" nom. 0.5" nom. 0.75" nom. 1" nom. Strap width 0.5" 0.5" 0.5" 0.5" Hole diameter 0.281" 0.281" 0.281" 0.281" Screw length 1" 1" 1" 1" Vent Loop Kit Use Powerar Vent Loop Kits on kitchen islands and other areas where a vertical vent pipe through the roof is not possible. These kits reduce costs and provide a professional look to exposed piping. 3 lways visit for up-to-date prices

5 racket Powerar Mini Strut is an economical alternative to cutting 10-ft. lengths of strut for common trapeze installations. Pre-cut bracket lengths made from high quality 16-ga or 20-ga galvanized steel with pre-drilled holes for 3/8" threaded rod reduces installation time to finish jobs ahead of schedule. vailable with or without standard or PlenumSafe Touchown clamps, size-specific steel clamps and available in different lengths, the Powerar Mini Strut is Made in the US of the highest quality materials. Two bracket styles available with pre-drilled holes for suspending from 3/8" threaded rod Optional pre-loaded Touchown clamps adjust to fit 1/4" 1" TS Heavy-duty models are available in 15" and 26" lengths (16-ga.) opper-plated or zinc-plated Minilamp sizes for 1/2" 2" TS and 1/2" 4" IPS T+ Universal lamp secures 1/2" TS through 2" Sch. 40 pipe Suspend bracket with 3/8" threaded rod using washers and nuts. 2. Slide Touchown clamps to desired location within the bracket. 3. Position tube or conduit into clamp base. 4. Ratchet bridge of Touchown clamps down tightly over both posts evenly. ESRIPTION LIGHT UTY HEVY UTY HEVY UTY (20-ga.) LONG (16-ga.) SHORT (16-ga.) Length 13-5/8" 26" 15" Hole diameter 0.39" 0.515" 0.515" TR center-line 12-3/4" 24" 13" Height 0.529" 0.465" 0.465" E Width 0.602" 0.675" 0.675" F (enter) Load ratings 70-lbs. 100-lbs. 250-lbs. Light uty Heavy uty E 4

6 The Minilamp is designed to work easily with any Powerar bracket and stamped from high quality steel. Each clamp is stamped as one piece of steel. reak the clamp into two halves. The threaded form on one half eliminates the need for a nut. Once placed into the bracket, the Minilamp stays erect, freeing both hands. vailable in two finishes and IPMO certified. Hardware to secure clamps around pipes is included Separate clamp and place in bracket. 2. Wrap copper with 10-mil tape and install between 2 halves. SIZE O.. : WITH : SREW/ OLT SIZE : GUGE opper-plated (TS) 1/2" 0.625" 0.704" #8 3/4" 18 3/4" 0.875" 0.704" #8 3/4" 18 1" 1.125" 0.875" 5/ " /4" 1.375" 0.875" 5/ " /2" 1.625" 1.00" 5/ " 16 2" 2.125" 1.00" 5/ " 16 Zinc-Plated (IPS) 1/2" 0.840" 0.704" #8 3/4" 18 3/4" 1.050" 0.704" #8 3/4" 18 1" 1.315" 0.875" 5/ " /4" 1.660" 0.875" 5/ " /2" 1.900" 1.00" 5/ " 16 2" 2.375" 1.00" 5/ " 16 3" 3.500" 1.00" 5/ " 16 4" 4.500" 1.00" 5/ " Insert screw/bolt and tighten. lso vailable: Pipeown coustical Options PlenumSafe Options 5 lways visit for up-to-date prices

7 I have been fortunate to win many other piping jobs because of the secure and neat work that we have been able to do with the use of the Powerar Mini Strut brackets. We have enjoyed the product and this is the best piping support system that we have ever used. Just the time savings alone (not having to cut other types of strut) is well worth the investment. rty Rollins Rollins Plumbing 6

8 24110 South Peculiar rive Peculiar, Missouri P F ISTRIUTE Y #LT3-PWRR.12/16 POWERR