M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
|
|
- Denis Burns
- 6 years ago
- Views:
Transcription
1 Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [ ] M4 T-Nut 20 [20-044] M4 Hex Nut [ ] PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4 FHCS M4x12 FHCS [ ] 1 2 Appx. 1 3mm For light doors and lids constructed of Glass-filled Nylon, Black 20 Series profiles Max Load: Nm (30 ft-lbs) Screws T-Nuts (1 per hole) (1 per hole) Hinge PA 20 Series Each 7 g Medium Hinge 30/ (for 30 profile) (for profile) M6x14 FHCS [ ] Appx. 1 2mm for Series 0mm for 30 Series Assembly of Medium Hinge 30/ on profiles 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing Suitable for medium loads such as Zinc Cast, Black Powdercoat machine and guard doors. Can be used Pin is Stainless Steel with 30 or Series profiles. Max. Load: 0Nm (295 ft-lbs) Recommended Fasteners (Order Separately) Series Screws T-Nut Medium Hinge 30/ Each 86 g
2 Handles & M6 Hex Nut [ ] 12 Light Duty PA or Fastening Set [20-013] Ø8 24 Fastening Set [20-013] x or M6x14 FHCS [ ] FOR M6 FHCS Attaching Light Duty to Series profiles and panels 3 Placement of hinges on panels 4 Non lift-off doors require one right hand and one left hand Hinge 5 Lift-off doors require either right or left hand & For light doors and lids constructed of Series profiles or light panel material. Glass-filled Nylon, Black Max Load: 100Nm (22 ft-lbs) Recommended Fastening Hardware Screws T-Nut Hex Nut Light Duty Hinge, Right Each 17 g Light Duty Hinge, Left Each 17 g
3 Light Duty Handles & M6 Hex Nut [ ] Fastening Set [23-022] 1 19 Lt. Hinge [23-021/023] M6 x 16 FHCS [ ] 24 Ø8 Fastening Set (x2) FOR M6 FHCS & ,2 Attaching Light Duty to Series profiles and panels 3 Placement of hinges on panels 4 Non lift-off doors require one right hand and one left hand Hinge 5 Lift-off doors require either right or left hand For light doors and lids constructed of Series profiles or light panel material Recommended Hardware Series Screw T-Nut Hex Nut Glass-filled Nylon, Black Max Load: 100Nm (22 ft-lbs) Light Duty Hinge, Right Each 21 g Light Duty Hinge, Left Each 21 g
4 Handles & Series M6 T-Nut [20-056] Non-Removable Hinge [23-545] Medium Duty Plastic (Metric) M6 x 16 FHCS [ ] High quality plastic hinges for constructing medium duty guard/ enclosure doors. are offered in two types: lift off (for left and right hand doors) and non-removable. Chart Mounting Surface 1 Mounting Surface 2 Gap (mm) Series Series 5 Series Panel Series Series 1 30 Series Series 0, Series Panel 30 Series 30 Series 0 30, Series Panel 30 Series 30 Series 5 Series Series 7 Recommended Hardware Glass-filled Nylon, Black Stainless Steel Pin Max Torque: 100Nm (74 ft-lbs) Dimensions (mm) A B Hinge Type Weight (g) Part # Non Removable Left Side Mount L Right Side Mount R Non Removable Left Side Mount L Right Side Mount R Non Removable Left Side Mount L Right Side Mount R Non-Rem Hinge Left Hinge 137 Right Hinge L R L R L R Series Screw T-Nut Panel Screw T-Nut mm Panel mm Panel For M6 FHCS NON-REMOVABLE B A LIFT OFF 48
5 Handles & Medium Duty Plastic (Inch) 1.5" Series 1/4 T-Nut [25-001] Non-Removable Hinge 1.5 [23-551] NON-REMOVABLE 1/4-20 x 3/4" FHCS [ ] 1.5" to 1.5" Series 1.5" to 1" Series 1" to 1" Series 1.50" 1.50" 1.00" 1.00" 1.50" 0.07" 1.50" 0.13" 1.00" 0.18" 1.00" A High quality plastic hinges for constructing medium duty guard/ enclosure doors. are offered in two types: lift off (for left and right hand doors) and non-removable. Glass-filled Nylon, Black Stainless Steel Pin Max Torque: 100Nm (74 ft-lbs) 1.10" 1.89" Series Screws T-Nuts 1.5" , or For 1/4 FHCS B 1" , or A B Hinge Type Weight (g) Part # Non Removable, 1.5" to 1.5" " 1.57" Left Side Mount, 1.5" to 1.5" L Right Side Mount, 1.5" to 1.5" R 2." 1.38" Non Removable, 1.5" to 1" Non Removable, 1" to 1" " 1.18" Left Side Mount, 1" to 1" L Right Side Mount, 1" to 1" R 138
6 Handles & Steel Series M6 T-Nut [20-055] Steel Hinge - Left [23-250L] Ø M6x8 BHCS [ ] 63.5 to Series to Series to Series Steel hinges for constructing guard/ enclosure doors. Lift off option allows access into enclosure. Specify a left hand or right hand lift-off hinge set depending on required direction of door opening. Steel, Black Zinc Plated Ø Ø7 Series Screws T-Nuts Any Series M Any Series M6 1.5" , or " , or Description Unit* Weight Part # Steel Hinge /1.5" - Left Each 18g L Steel Hinge /1.5" - Fixed Each 18g *** Steel Hinge /1.5" - Right Each 18g R Steel Hinge /1.5" to /1" - Left Each 14g L Steel Hinge /1.5" to /1" - Fixed Each 14g ** Steel Hinge 1.5" to /1" - Right Each 14g R Steel Hinge /1" - Left Each 13g L Steel Hinge /1" - Fixed Each 13g * Steel Hinge /1" - Right Each 13g R *Order L & R **Order L & R ***Order L & R Ø
7 Handles & Medium DBL T-NUT M8/24 [20-049] Fastening to vertical profile and panel element (all anti-torsion pins removed). 4 End face fastening of two profiles (with torsion pins) Fastening to vertical and horizontal profiles (2 anti-torsion pins removed). 5 Connection of two horizontal profiles (all anti-torsion pins removed) Fastening to vertical profiles (all anti-torsion pins removed). 6 Connection of two horizontal profiles (with anti-torsion pins) Positioning of hinges on a panel Suitable for medium loads such as machine and guard/enclosure doors, and as an angle connecting element for profiles. Fastens to T-Slot or profile face with integral torsion pins for precise squaring. Torsion pins can be removed with a screwdriver Zinc Cast, Galvanized, Black Max Load: 500N (112lbs) Order Hardware Separately Per Hole Series Screw T-Nut Medium Hinge 30 Each 0.18 kg Medium Hinge Each 0.18 kg Medium Hinge (Locking) Each 0.20 kg L 1
8 M6 Hex Nut [ ] M4 Hex Nut Handles & Adjustable Torque Adjusting Screw M6 T-Nut St [20-056] M6 x 12 BHCS [ ] M4 T-Nut Zn [20-037] M4 x 10 BHCS [ ] For M6 BHCS 63.5 Adjustable tension hinge for swinging doors to hold door open, partially open or closed. Can also adjust speed of opening or closing. Acetal, Black Polycarbonate hinge pin Maximum Torque: Ncm Ncm Torque Adjusting Screw Part # Series Screws T-Nut Hex Nut (2) (2) M6 sized for panel 1.5" (2) (2) , or (2) For M4 BHCS (2) (2) M4 sized for panel (2) (2) " Adjustable Hinge /1.5" Each 42 g Adjustable Hinge /1" Each 38 g
9 Positioning Handles & M5 Hex Nut [ ] Covers M5 T-Nut St [20-052] M5 x 14 BHCS [ ] 57 For M5 BHCS Multiple position hinge for swinging doors. Models with preset angles also open to 180. Acetal, Black Positioning Torque: 1.1 Nm Maximum Load: 450N Profile to Panel Screws T-Nut Hex Nut (4) (2) (2) Positioning Hinge 120 Each 37 g Concealed FOR M6 FHCS For inside or concealed door or lids. Used with Series profiles using M6 T-nuts. Concealed hinges are stackable to create non-removable hinges. To create a stackable hinge, order an additional hinge half and an additional hinge pin. Wings: Aluminum Bolt: Stainless Steel Screws T-Nuts (4) (4) STACKABLE (Non- Removable) Full Hinge 1 Set 39.8 g Half Hinge Each 24 g z1 Hinge Pin Each 11.8 g z2 142
10 Handles & Multi-Series Recommended attachment. Hinge cannot be loosened from outside. Door swings Mounting on inside of doors or lids where access from outside is not desired for security reasons. 4-6 Front mounting applications 7 Inside mounting clearance 8 Recommended hinge positions For outside or inside of doors and lids. St, black Used with, 30,, 20, 1.5" and 1" Includes: M5x16 cup square bolt, Series profiles using M5 T-nuts St or Zn. M5 hex nut, M5 washer, three M5x8 dome head screws. Order M5 T-nuts separately. Max. load 250 N (56 lbs) Multi-Series Hinge 1 set 51 g
11 Handles & Butt Hinge Steel hinge for constructing profile framed doors or panel doors. Available in medium and heavy duty version. M8 Hex Nut [ ] 19 Ø8.5 Steel, Zinc Plated or Black Powdercoat. Double T-Nut M8/ [20-050] 76 Recommended Fastening Hardware (Order Separately) Attachment to T-Slot M8 x 12 BHCS [ ] Mounting Screws T-Nuts Hex Nuts To Series (Per Hinge Side) (2) (1) To Panel (Per Hinge Side) (2) (2) B 2.8 (Clear) Part # (Black) Steel Hinge, Heavy Duty Each 160 g B Lift-Off Hinge Versatile hinge for series profiles. For lift-off and non-removable door configurations. Two T-slot alignment blocks are included. Zinc die cast, black powder coat Pin: St., zinc plated Maximum torque 100 Nm (74 ft-lbs) Order all hardware separately. Attachment to series profiles Screws T-Nuts or Lift-Off Door (load supported by two hinges) 2 Non-removable door (load supported by one hinge) 3 Range of swing Lift-Off Hinge Left 1 set 70 g 23-4L Lift-Off Hinge Right 1 set 70 g 23-4R 144
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationSection 4 Panels & Doors
Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers
More informationPanels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
More informationNEWS Part. N /0 MINITEC NEWS
NEWS 2009 Part. N 95.0423/0 MINITEC NEWS 2009 1 TABLE OF CONTENT INTRODUCTION CONTENTS 3 END CAP Z WITH HAMMER TAPS 3 END CAP 45X45 VA 4 ANGLE 25 GD-Z 4 ANGLE 45X90 GD-Z 5 ANGLE 90 GD-Z 5 HINGE 19 S 6
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationFlat Panel Stand FPZ-655. for 32" to 55" Flat Panel Screens FEATURES. Reinforced universal adapter plate for a strong hold
FPZ-655 Flat Panel Stand for 32" to 55" Flat Panel Screens For a viewing experience that really stands out, Peerless FPZ-655 Universal Flat Panel Stand for 32" 55" flat panel TVs provides a brilliant combination
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
PROFILE SYSTEM PRE-ASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS s r ood gni d i l s dna gni t f i l r o f s t neme l e de l bme s s a - er P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS MINITEC
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS SPORTSMAN WINCH MOUNT GRILLE GUARD APPLICATION: 2016-2018 Toyota Tacoma PART NUMBER: 40-93885, 45-93880, 46-23885 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 WINCH TRAY 15MM SOCKET
More informationLinear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
More informationB Connectors. Automation. Structural Framing System Connectors & Fasteners
BContents B Connectors Gussets... 2 End Fasteners... 4 Anchor Fasteners... 5 Angle Brackets... 6 45 Support Brackets... 8 Butt Fasteners... 9 Hinged Support Brackets... 10-13 Joining Plates... 14-18 Nuts
More informationINSTALLATION MANUAL FRONT. See pages 2 and 3 of this manual for configuration options. Level of Difficulty. Product Photo (center section only)
INSTALLATION MANUAL FRONT Level of Difficulty Moderate Product Photo (center section only) All hardware listed below will be provided with the bumpers center section. Additional hardware will be supplied
More informationK15.12 ROLLENBAND K15 DOORS
K15 DOORS 01.04.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics....03 2. Application range....03
More informationInstallation Instructions TMW Antenna Tower Mount for 4ft (1.2m) Antennas.
Description The following pages show the steps required to assembly and fit the antenna mount to a vertical tower pipe of diameter 48 to 115 mm (1.9 to 4.5"). This mount provides ±20 azimuth or ±15 elevation
More informationSPECIAL EXTRUSIONS AND ACCESSORIES
PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps Import Belgium & Luxembourg Profilex s.a. 4A, Z.I. In den Allern L-9911 Troisvierges Tel: 00352/99 89 06 Fax: 00352/26 95 73 73 www.profilex-systems.com
More informationMounting a BalanceBox 400 to a brick wall
Unpack the BalanceBox 400 and remove the Wall frame cover and its bag of screws. Slide the cover out at the top. NOTE: the cover is NOT included with the BalanceBox 400H LOCK SCREW HOLE MOBILE STAND MOUNTING
More informationCopyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM3010A RM315-R2 RM323-R2 RM329 RM451 RM457 RM3020A RM316 RM324-R2
More informationIN-30000_F. Installation Instructions
IN-30000_F Installation Instructions Parts Overview Detail A Detail B Detail C Detail A Detail C Detail B Parts List & Tools PARTS ITEM NO. PART NUMBER DESCRIPTION Qty 1 01-30008-01 P/C,DOUBLE T-SLOT CROSSBAR,
More informationFastening Technology. The Strong
100 The Strong Fastening Technology A few years ago connecting without drilling, milling or welding was almost unthinkable. It is obvious that if you can eliminate machining or welding from the process
More informationEnclosures, guards and partitions 6. Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security
Clamp Profiles Hangers Dual-Rod Mesh Hanger Lifting-Door System Door Security Application example system solutions for enclosures and guards Components for building enclosures and guards 1 2 3 4 5 7 194
More informationMAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
More informationTECHN. DATA/ITEMS SUPPLIED APPLICATIONS ASSEMBLY. - Connection of profiles
MOUNTING BRACKET 45 Part N 21.1411/0 - GD Zn, powder coated, grey Weight 0,426 kg - Connection of profiles - For subsequent fitting of profiles into existing constructions, displacable in direction of
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationMODULAR BUMPER INSTALLATION MANUAL
MODULAR BUMPER INSTALLATION MANUAL Parts List* 1 Center section 1 Side extension, passenger / right 1 Side extension, driver / left 1 Side cap, passenger / right 1 Side cap, driver / left 1 Brush guard,
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
More informationINSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART #
INSTALLATION INSTRUCTIONS GRILLE GUARD 09-ON DODGE RAM PART # PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Brackets (for trucks without 22 12mm x 30.1mm OD
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationDOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Instr Rev Page 1 of 6. Verify accessory fitment at Polaris.com.
DOOR KIT P/N 2882528 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these installation
More informationFLOOR ANCHOR SYSTEM APPLICATIONS L TRACK APPLICATIONS
FLOOR ANCHOR SYSTEM APPLICATIONS Sure-Lok recommends the following for floor anchor system layout and installation. These recommendations are not all-inclusive and may not be applicable to every system
More informationSTANDARD 430E Series. Bottom mounted full extension drawer runners 430E E E E E E E E E4000
STANDARD 430E Series Bottom mounted full extension drawer runners Specifications Runner 430E8000 430E7500 430E7000 430E6500 430E6000 430E5500 430E5000 430E4500 430E4000 430E3500 430E3000 430E2500 Nominal
More informationBY ALIEN TECHNOLOGIES CORP
BY ALIEN TECHNOLOGIES CORP Assembly Instructions TopLift Pros YOU MAY ALSO REVIEW OUR ASSEMBLY VIDEO, PLAY AND PAUSE AT YOUR CONVENIENCE. JUST VISIT US AT WWW.TOPLIFTPROS.COM AND GO TO Customer Support
More informationInstallation Instructions - Model V4JSD 1
Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)
More informationBolt Together Pump/Screw Together Frame Conversion Kit
Instruction Sheet P/N Bolt Together Pump/Screw Together Frame Conversion Kit 1. Description The bolt together pump/screw together frame conversion kit changes your Rhino unloader from a 3-post screw together
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationElements Pole Mounting System
Elements Pole Mounting System Installation Manual www.peavey.com Elements Pole Mounting System Installation Manual The Elements Pole Mounting System is a simple and straightforward pole mounting solution
More informationHow To Measure Your Finished Opening
3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips
More informationSTANDARD. Drawer runner program. Perfecting motion.
STANDARD Drawer runner program Perfecting motion STANDARD drawer runners Table of Contents Blum STANDARD drawer runners apply proven technology built upon years of experience to ensure a solid performance
More informationINSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
More informationMODUL general specifications
hinges general specifications inge-to-door attachment Mounting plate-to-cabinet Press-in Use #6 wood screws Pre-attached dowels, install with lum MINIPRESS lum boring pattern Door-to-cabinet attachment
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationTRIADE MAXI TRIADE MAXI WOOD AND GLASS SHELVING SYSTEMS
is the concealed mounting bracket for shelves minimum 0mm thick. It has been conceived to simplify the shelf installation. It is provided with three indipendent adjustments: 1) VERTICAL Before installing
More informationACCESSORIES. Wooden Dowels. Fasteners. Miscellaneous. Shelf Supports
ACCESSORIES ACCESSORIES Fasteners PMI has a variety of Fasteners and Connectors for any application. Euro-Bolts, Spiral Cam Connectors, Screws and Sleeves - we have your solution! Shelf Supports Assorted
More informationWPS crew Doors Installation instructions
WPS-132-133 crew Doors Installation instructions ORDER OF INSTALLATION FOR A COMPLETE ENCLOSURE OF A CREW WPS (Weather Protection System) IS AS FOLLOWS: 1. Heater 2. Rear Thresholds - Right Hand & Left
More informationBÖMA GmbH Maschinenbau und Automatisierungstechnik
Construction kit index Profiles Aluminium grid 40 1.01 Aluminium grid 50 1.02 KP-40/50 Plastic profile 1.03 AP-40/50 Aluminium cover profile 1.03 SBT-F Sliding doors guide prof. 1.04 FL-40/50 Wear strip
More informationINSTRUCTIONS INSTRUCCIONES CONSIGNES
AUTOMOTIVE PRODUCTS, INC. INSTRUCTIONS INSTRUCCIONES CONSIGNES APPLICATION: GMC SIERRA 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART # S 57-3690, 57-3695, 40-3695, 45-3690 ITEM QUANTITY
More informationv1.0 ASSEMBLY GUIDE Mia Wide Bookcase
v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.
More informationFOLDING HARDWARE STARTEC T-SNAP G2/G4
FOLDING HARDWARE STARTEC T-SNAP G2/G4 T-SNAP G2 T-SNAP G4 Technical data: 40 kg for package throughout Height according 36+7 mm Fix bracket every 400 mm T-SNAP G2: 1x door leaf package T-SNAP G4: 2x door
More informationTRUE TECHNICAL SERVICE MANUAL - ALL MODELS. DOORS/DRAWERS/LIDS
DOORS/DRAWERS/LIDS 55 56 NOTES DOORS/DRAWERS/LIDS Springs 97 TORSION SPRING REPLACEMENT GDM RADIUS FRONT - SWING DOOR INSTALLATION INSTRUCTIONS Tools Required (2) - 1 8" drift Punch (forged) Needle-Nose
More informationArctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2. Arctic Standard Steel Blade, Quadrant & A-frame Installation...
Table of Contents for Standard Steel Arctic Standard Duty Steel Blade 84", 90" (Blade, Quadrant, A-frame)...2 Arctic Standard Steel Blade, Quadrant & A-frame Installation...6 Important note: Lift frames
More information#916 CLASSIC 16 GUN CABINET ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. A list of PARTS and INSTRUCTIONS is included to assist you. Unpack and identify all parts included on the Parts List and Hardware List. If parts are missing,
More informationRequired Tools: Suggested Additional Tools: 1 Cordless Drill with Robertson Bits 1 Ratchet Wrench 1 7/16 or 11mm socket 1 7/16 or 11mm Gear Wrench
Thank you for your recent purchase of a Cabinets by Hayley garage cabinet system. You are about to experience the best made cabinets that you can purchase. Cabinets by Hayley are designed for beauty and
More informationFURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS
www.hafeleindia.com FURNITURE HARDWARE & ACCESSORIES - PART 3 : LEVELLERS AND HANGERS ABOUT ITALIANA FERRAMENTA ITALIANA FERRAMENTA is specialized in the production of high quality accessories and ironmongery
More informationSAM. Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual. Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" Page 20
SAM Model: STV-C65 LCD Mobile Visualized Stand Instruction Manual Weight Capacity: 1251bs / 56.7kg Suits LCD Flat Panel Display: 42"-55" 20 Step 6 LCD Mobile Lift Stand Model: STV-C65 Cable management
More information400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS
12/11/07 PAGE 1 OF 12 400A 40113V, 401A 40120V, & 401AL 40120VL ALUMINUM VERTICAL 4000 LB LIFT INCLUDES SCREW LEG ASSEMBLY INSTRUCTIONS Thank you for purchasing our product! *Please read these instructions
More informationFast, Flexible, Functional
FA ZTEK T H E S H A P E O F T H I N G S T O C O M E T-Slotted Aluminum Solutions Fast, Flexible, Functional FAST Prompt, timely shipments Shortest possible turnaround Large in-stock inventory of standard
More informationComponents made of special materials. Floor Elements for Profile St Profile KH. Fastening Elements for Profile KH
Profile Fastening Elements for Profile Floor Elements for Profile Profile KH Fastening Elements for Profile KH Components made of special materials Products in this section Profile 8 x eel profile that
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION
More informationInstallation Instructions
IN-30000_F Installation Instructions TracRac Inc. 994 Jefferson St. FallRiver MA 02721 www.tracrac.com 800-501-1587 Thank you for your purchase of a T-Rac G2 cargo rack from TracRac. TracRac takes great
More informationInstallation Manual Flat Track Series
Manual Flat Track Series Contents Safety...1 Parts...2 Hardware.......................................... 2 Tools Required..................................... 4.............................................
More information11 6 Round Building Assembly Instructions
11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes
More informationToilet Partition Hardware
Concealed and Surface Mounted Latches Toilet Partition Hardware D D 91-8 Used with 91-129 Housing merican Metal 91-330 Used with 91-129 Housing 91-84 91-130 For 1" Laminated Door 91-131 With Flat Tip Bar.
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationRoller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
More informationLOW-PROFILE WALLMOUNT CABINETS
USER MANUAL RMT35X SERIES LOW-PROFILE WALLMOUNT CABINETS 24/7 AT OR VISIT BLACKBOX.COM TABLE OF CONTENTS SAFETY INFORMATION... 3 Receiving, Unpacking, and Removing the Low-Profile Wallmount Cabinet from
More informationEZ BALANCER II. Please note: The hardware and accessories listed may not be the same as shown. We are always improving the product.
Parts List EZ BALANCER II 2ea. Aluminum Angle Base Frame Members. 2ea. 1/2"x1" Aluminum Angle Cross Frame Members. 2ea. Aluminum Uprights. 2ea. Aluminum Cradles. 4ea. Rubber Cradle Guards. 4ea. Rubber
More informationSpiral gypsum plasterboard fixing
Spiral gypsum plasterboard fixing No pre-drilling: in single sheet gypsum plasterboard No surface cracking due to special thread geometry High load bearing values up to 8 kg in gypsum plasterboard per
More informationsalto safe 4028 A12 Turn-tilt windows
A12 Turn-tilt windows salto safe 4028 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. 32 9 388 88 81 - F. 32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com salto safe 4028 Contents 1. General
More informationCREW REAR DOOR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS. Verify accessory fitment at Polaris.com.
CREW REAR DOOR KIT P/N 2883437 APPLICATION Verify accessory fitment at Polaris.com. BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted for. Please retain these
More informationINSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02
INSTALLATION INSTRUCTIONS PART#:17GT23MSS\17GT23MA MODULAR GRILL GUARD FOR CHEVY SILVERADO 1/2 TON 99-02 1 guard, center section 1 brush guard, left side 1 brush guard, right side 1 wire guard insert,
More informationREAD ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION
INSTRUCTIONS AND REPAIR PARTS LIST 2G - GRO-FAST TM HOG FEEDER - BROWER 2GP - GRO-FAST TM HOG FEEDER - PRIDE OF THE FARM READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION TOOLS REQUIRED: Straight
More informationCustom Wood Frame Overlay for Glass Doors Installation Instructions
MARVEL CUSTOM WOOD FRAME OVERLAY FOR GLASS DOORS Custom Wood Frame Overlay for Glass Doors Installation Instructions Wine Cellars 6SWC 6SWCE 61WC 61WCM 66SWC (2 required) 66SWCE (2 required) Beverage Centers
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationMODEL 9301E. Extra Heavy Duty Full Extension Drawer Slide Up to 600-lb. [272 kg.] Load Rating Optional Accessory Platform Brackets*
1 MODEL 9301E APPLICATIONS: This versatile slide is designed for use in a variety of heavy-duty storage applications. Please preview the application information provided on the following pages for further
More informationWindow Guards. Add safety and security to any window.
Window Guards Add safety and security to any window. John Sterling Window Guards help protect children and pets from window falls while keeping intruders out. Each of the window guard series has solid
More informationASSEMBLY & INSTALLATION INSTRUCTIONS
ASSEMBLY & INSTALLATION INSTRUCTIONS VEHICLE MOUNT KIT 118 AND VEHICLE CENTER MEMBER 6050 TO FIT 2008 & LATER FORD F250-F550 4X4 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International,
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More information(2) 25mm x 20mm x 5mm Adhesive Backed Foam Pads. 100mm x 50mm x 1.0mm Adhesive Backed Foam. (2) Spacer Plates. Passenger/Right Side Frame Mounting
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Frame Mounting 16 12mm x 32mm OD x 3mm Flat Washers 1 Passenger/Right Frame Mounting 8 12mm Hex Nuts 1 Driver/Left Side Top Support 2 10-1.50mm
More information300 Series Pin & Barrel Type Continuous Stainless Steel Hinges
www.mfsales.com 300 Series Pin & Barrel Type Continuous Stainless Steel Hinges Short Form Architectural Specification: Continuous hinges shall be full height piano-type hinge providing full height door
More informationInstallation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
More informationTEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER PART # 17FJ26MA
\ TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS GRILL GUARD FOR FORD EXPLORER 02-05 PART # 17FJ26MA NOTE: Please read this information before assembling. Complete step by step instruction sheets will be
More informationRH-412 STEEL DOORS INSTALLATION INSTRUCTIONS
RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.
More informationCW-Type Wall Mounted Cabinets Installation Instructions
Instruction Sheet 860446194 Issue 2, March 2013 CW-Type Wall Mounted Cabinets Installation Instructions General CommScope wall mount cabinets are available in 24-inch (610mm), 36-inch (914mm) and 48-inch
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationINSTALLATION INSTRUCTIONS RH 412 STEEL DOORS
By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationUniversal ARCOS EA. Patch Fittings
Universal ARCOS EA Patch Fittings Product range 4 5 DORMA Universal 6 25 ARCOS Universal 26 33 DORMA EA 34 39 Accessories 40 50 Metric/English Conversion Guide 51 3 DORMA Product Range DORMA Patch fittings
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationBB1068 / BB1099 SERIES
068 / 099 SRIS LL RING TMPLT UTT HINGS HVY WIGHT Non-handed ase material: steel for series 068, stainless steel for series 099 High grade plated finishes Standard non-rising non-removable pin (NRP) Standard
More informationINSTALLATION INSTRUCTIONS
www.marwincompany.com Kit Number Door Height Rough Opening Height KD200BB68 80 84 ½ KD200BB70 84 88 ½ KD200BB80 96 100 ½ INSTALLATION INSTRUCTIONS 200BB SERIES KD POCKET DOOR FRAME FOR 2 X 4 STUD WALLS
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationTwin-Wall Double Swinging Door Kit
115021 Twin-Wall Double Swinging Kit READ THIS DOCUMENT BEFORE YOU BEGIN Thank you for purchasing this GrowSpan door kit. When properly assembled and maintained, this product will provide years of reliable
More informationGrowSpan Single Swinging Door Black-Out Door Kit
GrowSpan Single Swinging Door Black-Out Door Kit ATTENTION: Door kit includes materials for door only. All other components shown in the diagram above and diagrams throughout this guide are not included
More informationSINGLE TRACK BYPASS (patent pending) barn door hardware
SINGLE TRACK BYPASS (patent pending) barn door hardware Installation Manual What is included in your kit: Part number Part name Quantity 1 Inner door hanger 2 2 Outer door hanger 2 3 5/16 x 1.5 lag bolts
More informationInstruction Sheet RADIO FREQUENCY SYSTEMS. Install. Instr. for Microwave Parabolic Antennas 2.4 m (8 ft) No Rev.
Instruction Sheet No. 412764 Rev. B ECO 12469 Install. Instr. for Microwave Parabolic Antennas 2.4 m (8 ft) These Installation Instructions are valid for antennas in the following version: reflector 2.4
More informationRemoving the Z-Axis lead screw
Page 1 of 8 TITLE: Sabre Z-Axis Lead Screw Replacement Procedure Gerber FastFact #: 5048 Supplied by: Gerber Hardware Support Last Modified: June 14, 2007 Summary: Tools used: The following procedure explains
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationHydraulic Torque and Ratcheting Wrenches
Series Hydraulic Torque and Ratcheting es Fits easily in tight spaces Thinner than the nut height Light weight, best power to weight ratio in the industry. Interchangeable wrench heads and reaction units
More information