Techline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
|
|
|
- Benedict Williams
- 6 years ago
- Views:
Transcription
1 Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE Techline Yoke Clamps* 100 Clamps Per Bag # OF TUBES CATALOG # 1/4Ó O.D. 1 or 2 TLY4-2 1/4Ó O.D. 2 or 4 TLY4-3 3/8Ó O.D. 1 or 2 TLY6-2 3/8Ó O.D. 2 or 4 TLY6-3 1/2Ó O.D. 1 or 2 TLY8-2 1/2Ó O.D. 2 or 4 TLY8-3 3/4Ó O.D. 1 or 2 TLY12-2 Any Size Tube To Fit 4Ó Channel - TLY 4-10 Any Size Tube To Fit 6Ó Channel - TLY 8-12 *Yoke Clamps Are Available To Fit Any Width. Techline Gang Clamps* 25 Clamps Per Bag #OF TUBES CATALOG # 2 - TLG**2 SSB 3 - TLG**3 SSB 4 - TLG**4 SSB 5 - TLG**5 SSB 6 - TLG**6 SSB 7 - TLG**7 SSB 8 - TLG**8 SSB 9 - TLG**9 SSB 10 - TLG**10 SSB 11 - TLG**11 SSB Notes: TLG**12 SSB 1 N/A in 1/2Ó 1 * All Clamps Are.316 SS ** Please Specify Size Code - 4 for 1/4Ó, 6 for 3/8, 8 for 1/2Ó Gang Clamps Over 12 Tube Size Are Available Upon Request 9
2 TECHLINE Techline Bundle Clamps CABLE SIZE PART NUMBER 1.24Ó or less TLBC Ó Ó TLBC Ó Ó TLBC Ó Ó TLBC Ó Ó TLBC Ó Ó TLBC Techline Single Clamps 50 Clamps Per Bag TUBE SIZE PART NUMBER 1/4Ó O.D. TLG 4-1 3/8Ó O.D. TLG 6-1 1/2Ó O.D. TLG 8-1 5/8Ó O.D. TLG /4Ó O.D. TLG Ò O.D. TLG 16-1 Techline Duplex Clamps 50 Clamps Per Bag TUBE SIZE PART NUMBER 1/4Ó O.D. TLD 4-2 3/8Ó O.D. TLD 6-2 1/2Ó O.D. TLD 8-2 3/4Ó O.D. TLD Ò O.D. TLD
3 TECH MOUNT Mounting Hardware 17
4 CONDUIT STRUT CLAMPS Easy Installation Fits Both EMT and Rigid Conduit Nut and Bolt Included Zinc Plated Standard 304SS Available Upon Request PART NO. EMT/RIGID DESIGN LOAD STD. PKG. TSCC50ZP 1/2Ó 400# 100 TSCC75ZP 3/4Ó 400# 100 TSCC100ZP 1Ó 400# 100 TSCC125ZP 1 1/4Ó 600# 100 TSCC150ZP 1 1/2Ó 600# 50 TSCC200ZP 2Ó 600# 50 TSCC250ZP 2 1/2Ó 800# 50 TSCC300ZP 3Ó 800# 50 TSCC350ZP 3 1/2Ó 1000# 50 TSCC400ZP 4Ó 1000# 25 Note: Part Numbers Shown are Zinc Plated, for 304SS add (SS) Suffix to the Part Number Example: TSCC50SS TECHSTRUT TUBING STRUT CLAMPS Easy Installation Fits O.D. Tubing Nut and Bolt Included Zinc Plated Standard 304SS Available Upon Request PART NO. TUBING DESIGN LOAD STD. PKG. TSTC25ZP 1/4Ó 400# 100 TSTC38ZP 3/8Ó 400# 100 TSTC50ZP 1/2Ó 400# 100 TSTC63ZP 5/8Ó 400# 50 TSTC75ZP 3/4Ó 400# 50 TSTC100ZP 1Ó 600# 50 TSTC125ZP 1 1/4Ó 600# 25 TSTC138ZP 1 3/8Ó 600# 25 TSTC150ZP 1 1/2Ó 600# 25 TSTC175ZP 1 3/4Ó 800# 25 TSTC200ZP 2Ó 800# 25 TSTC250ZP 2 1/2Ó 800# 25 Standard Material Width is 1 3/8Ó 1/4Ó - 4/3Ó Sizes Use 16 GA 1Ó - 1 1/2Ó Sizes Use 14 GA 1 3/4Ó - 3 1/2Ó Sizes Use 12 GA 4Ó Sizes Use 11 GA TSTC300ZP 3Ó 800# 1 TSTC350ZP 3 1/2Ó 800# 1 TSTC400ZP 4Ó 1000# 1 Note: Part Numbers Shown are Zinc Plated, for 304SS add (SS) Suffix to the Part Number Example: TSTC25SS 37
5 CUSH-A-CLAMP CUSH-A-CLAMP channel mounted clamping systems are ideal for multiple line runs, while absorbing shock and vibration, reducing unwanted noise and preventing galvanic corrosion. THE CLAMP - Features a unique shoulder stud which is securely fastened to one clamp half. This ÒControlled-SqueezeªÓ design eliminates overtightening and rotation while a nylon-insert nut assures a positive lock. Clamps are available in steel (with electrodichromate finish), and stainless steel. Fits any standard 1 5/8Ó wide channel. THE CUSHION - Manufactured from a thermoplastic elastomer, itõs built tough to withstand the effects of most oils, chemicals and industrial cleaning compounds, in temperatures from -50¼ to 275¼F. A patented ÒLiving HingeÓ allows the cushion to be spread apart for quick, easy installation. Interlock edges and channel locator legs insure that the cushion remains in place. WIDE SIZE RANGE -Available in tube sizes from 1/4Ó to 6 1/8Ó, pipe sizes from 1/4Ó to 6Ó. Special sizes available, call factory. INSTALLATION -One man, one tool time savings. Retrofits can be added without disassembling your present system. TUBE SERIES PIPE SERIES ASSEMBLY *COPPER & STEEL COPPER WATER ASSEMBLY NOMINAL PART NO. TUBING PIPE (NOM.) PART NO. PIPE SIZE DIM ÒAÓ DIM ÒBÓ DIM ÒCÓ DIM ÒDÓ 004T008 1/4Ó T010 3/8Ó 1/4Ó T012 1/2Ó 3/8Ó N012 1/4Ó T014 5/8Ó 1/2Ó N014 3/8Ó T016 3/4Ó 5/8Ó N018 1/2Ó T018 7/8Ó 3/4Ó T020 1Ó N022 3/4Ó T /8Ó 1Ó T /4Ó N026 1Ó T /8 1 1/ N /2Ó N /8Ó 1 1/2Ó N /4Ó N /4Ó N /8Ó N /2Ó N036 2Ó N /8Ó 2Ó N /8Ó 038N044 2Ó N /2Ó N /8 2 12Ó N /8 046N /2Ó N054 3Ó N /8Ó N /16Ó N /2Ó 056N062 3Ó N /8Ó 3 1/ N072 4Ó 064N /2Ó N /8Ó N /16Ó N /2Ó 072N080 4Ó N / N096 5Ó N / N114 6Ó A patented ÒLiving HingeÓ allows the cushion to be spread apart for quick, easy installation on sizes from 1/4Ó throug 5/8Ó. Ordering CUSH-A- CLAMP assemblies is fast and easy. Refer to the installation chart, select your specific application, then order the appropriate assembly part number. All pipe series and tube series above 1 3/8Ó are furnished without the controlled-squeeze shoulder bolt. These series feature a threaded stud securely fastened to one clamp half. CUSH-A-CLAMP assemblies are available individually packaged in sizes up to and including 2 1/8Ó, upon request. When ordering stainless, substitute ÒNSÓ for ÒTÓ or ÒNÓ. * Tube O.D. is Cushion I.D. All parts are marked for easy identification and packaged for small lot or bulk use. Part Numbers are ÒcodedÓ to designated Tube or Pipe series, cushion size and clamp size. Example: Tube Series: 004 (Cushion Size 1/4Ó T (Tubing Assembly) 008 (Clamp Size 1/2Ó) Pipe Series: 009 (Cushion Size 1/4PÓ N (Pipe Assembly) 012 (Clamp Size 3/4Ó)
6 STANDARD DUTY CLAMPS Ð ARRANGEMENTS Arrangement A1 Single Clamp Stacking Kit Arrangement A Single Clamp with Weld Plate Arrangement D Single Clamp Stacking Module (not available for size 0) (Order weld plate separately) Note: 3 max. stacking modules recommended. Arrangement A1TM Single Clamp for C-Rail Mounting (Order C-Rail separately) Parts Legend 1. Hex Head Bolt 5. Clamp Pair 2. Top Plate 6. Stacking Bolt 3. Weld Plate 7. Insert 4. Safety Plate 8. C-Rail Nut Arrangement B Single Clamp without Top Plate OTHER SIZES AND ACCESSORIES AVAILABLE Please consult factory for full catalog or visit our web site at mfg.com Model Code: Series Size 0 to 6 (refer to Table A) HRL 1 A 10 PP UNC Thread Type Clamp Material PP - Polypropylene PA - Polyamide AL - Aluminum (not avail. for size 0) Arrangement A - Single clamp with weld plate B - Single clamp without top plate D - Single clamp stacking module (not avail. for size 0) A1 - Single clamp stacking kit A1TM - C-rail mounted clamp Bore Size (refer to Table A) FOR 304 SS HARDWARE ADD A4 TO END OF MODEL CODE 44
7 STANDARD DUTY CLAMPS Ð DIMENSIONS a Table A 3 Size 0.39 (10).37 (9.5) A - Arrangement a 1 Sizes 1-6 A - Arrangement C-Rail and C-Rail Nut Dimensions Note: Dimensions shown in inches (millimeters). Recommended Bore Size Nominal Size a 1 h 2 h 3 Bolt Size Weight Tube Pipe in in in in in in Sizes lbs (kg) Size in mm O.D. Size (mm) (mm) (mm) (mm) (mm) (mm) Arrangement (in) A B /4" /16" /8" - N/A 1.10 A 1/4-20 x 1-1/ /8" (28) B 1/4-20 x /4" - (16) (32) (29) /16" - A 1/4-20 x 1-1/ /8" /8" (20) (36) (34) B 1/4-20 x (.06) (.05) (.08) (.06) /2" A 1/4-20 x 1-1/ /8" - (26) (42) (40) (19.5) (39) (36) () (.07) /8" B 1/4-20 x 1-1/ /4" /2" A & B 1/4-20 x 1-1/ (33) (50) (48) (21.5) (43) (40) (.14) (.10 ) " /4" (40) (59) (57) (24) (48) (45) A & B 1/4-20 x 1-3/4 (.15) () /4" " /2" - (52) (72) (70) (32) (64) (61) A & B 1/4-20 x 2-1/2 (.19) (.14) /4" /4" - A 1/4-20 x 2-3/ /2" " - (66) (88) (86) (36) (72) (69) B 1/4-20 x 2-1/2 (.24) (.18) C-Rail.43 (11).08 (2) 1/4" -20 UNC C-Rail Nut Plastic Cap.43 (11) 39 (10).59 (15) h1 h 2 h 2 B - Arrangement a 1 B - Arrangement h 3 h (28).96 (24.5).20 (5).39 ( 10)
Clamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
Superstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
Cat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS
SECTION 15062 NON-PENETRATING ROOFTOP HANGERS AND SUPPORTS For best results, display hidden notes to specifier. PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe supports. B. Conduit supports. C. Duct supports,
VPN: ISBXLR. Copyright Black Box Corporation. All rights reserved Park Drive Lawrence, PA Fax
VPN: ISBXLR Copyright 2003. Black Box Corporation. All rights reserved. 1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax 724-746-0746 JULY 2003 RM649-R2 RM657 RM664 RM861 RM650 RM658-R2 RM665-R2
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
Transmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
SIG-032-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY III LUMINAIRE ARM (SEE CONTRACT) 6'-0", 8'-0", 10'-0" NOMINAL SPREAD
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
SIG-030-B TRAFFIC SIGNAL MAST ARM POLE AND MAST ARM DETAILS - CATEGORY I LUMINAIRE ARM 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) POLE CAP
Michigan Department of Transportation 6'-0", 8'-0", 10'-0" NOMINAL SPREAD (SEE CONTRACT) LUMINAIRE ARM (SEE CONTRACT) POLE CAP 1'-6" (6'-0" ARM) 1'-10" (8'-0" ARM) 2'-0" (10'-0" ARM) NOMINAL RISE 2.38"
TAILGATE SPREADER MATERIAL SAVER SYSTEM INSTALLATION & OPERATION MANUAL (TGS 300, TGS 600, & TGS 1100) TGS11328
TAILGATE SPREADER MATERIAL SAVER SYSTEM INSTALLATION & OPERATION MANUAL (TGS 300, TGS 600, & TGS 1100) TGS11328 TABLE OF CONTENTS WARNINGS & CAUTIONS... 2 MATERIAL SAVER SYSTEM PARTS LIST... 3 EXISTING
WESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
Beam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E
SS1062, SS10621 & SS10621E Free Standing PWC & Fishing Boat Hoist SS1062 SS10621 SS10621E Midwest Industries, Inc. Page 1 Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003231 REV A 1/25/05 Bundles
Assembly and Installation Manual Pontoon Bunk & Side Guide Kit for 4000/5000 Vertical LIFT MCD p/n
Assembly and Installation Manual Pontoon Bunk & Side Guide Kit for 4000/5000 Vertical LIFT MCD p/n 1547-01 A. Intended Use The Metal Craft Pontoon Bunk and Side Guide Kit are intended for pontoon boats
Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
H HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
Panels, Panel Mounting & Other Accessories
Panels, Panel Mounting & Other Accessories Wire mesh guarding on assembly conveyor line Machine safety enclosure using Lexan panels 108 Multiblock Al 1-105 1-3 Various fastening options for panels on Multiblock
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
Section Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
FIRE PROTECTION PRODUCTS
FEATURES Rev. 7-11 Mueller Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also,
THE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
UL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
MetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
MI: (Secure this number someplace, for possible future need) SPECIFICATIONS:
6C ASSEMBLY INSTRUCTIONS ANTENNA MODEL T6 MI: 030927 (Secure this number someplace, for possible future need) SPECIFICATIONS: FORWARD GAIN 5.1 dbd F:B RATIO 15-25 db (Rises with frequency) FREQUENCY COVERAGE
Mast and Antennas for Field Day & Emergencies
Mast and Antennas for Field Day & Emergencies John A. Allocca, WB2LUA, July 2005 This is a 27 feet 1.5 diameter portable guyed mast with a 28 feet diameter footprint. It breaks down into four 6 feet sections
RBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
Factory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
PACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
INSTALLATION INSTRUCTIONS / DODGE RAM CREW CAB 2500/3500
INSTALLATION INSTRUCTIONS 225019 / 225019-2 2010 DODGE RAM CREW CAB 2500/3500 PARTS LIST: Qty Description Qty Description 1 Driver/Left Side Bar 4 Plastic Square Retainer 1 Side Bar 2 12mm x 120mm Hex
Universal Bracketing System
Universal racketing System Unique Patented. Pre-loaded, multi-size Touchown clamps Versatile djustable or fixed-length bracket options with a full line of accessories and universal adjustability to accommodate
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Ledex Tubular Linear Solenoids
Ledex Tubular Linear Solenoids Force lbs. (newtons) 10 (.) (35.5) 6 (6.69) (17.79) 10% Duty Cycle 70W 5% Duty Cycle W 50% Duty Cycle 1W 100% Duty Cycle 7W saia-burgess Solenoids 1-00-99-9 www.saia-burgess-usa.com/ledex
Waterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
The Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
Industrial Areamaster Generation 2 HL LED Luminaire Floodlight for Ordinary Locations
Industrial Areamaster Generation HL LED Luminaire Type R,, X Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production facilities Warehouses Processing
Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4
I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It
Preformed Clamping Systems As industrial hose made of stiffer, thinner, thermoplastics replace soft, spongy, thickwalled rubber, a new generation of hose clamps has been developed to prevent leak problems.
MTS-ZB. RENOGY Photovoltaic Module Z-Bracket Mounting System E Philadelphia St, Ontario, CA Version: 1.
MTS-ZB RENOGY Photovoltaic Module Z-Bracket Mounting System 2775 E Philadelphia St, Ontario, CA 91761 1-800-330-8678 1 Version: 1.0 Important Safety Instructions Please save these instructions. This manual
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes 05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A76 A76 pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab Δ déåéê~ä=^ééäáå~íáçåë o^`l=ñäççê=äçñéë=~êé=áçé~ääó=ëìáíéç
SECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
8mm x 25mm "Z" Bolt Plates. (2) Tube Spacers. (2) 12mm Bolt Plates w/ Nut
PARTS LIST: 1 Grille Guard 10 12mm Lock Washers 1 Driver/Left Side Frame Mounting Bracket 8 12mm Hex Nuts 1 Passenger/Right Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Driver/Left
Copper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2012 Hilti North American MI/MQ Technical Guide Volume 3. For complete details on this product, including data development, general suitability, installation, and corrosion
Section 4 Panels & Doors
Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers
Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA
Directive Systems & Engineering 2702 Rodgers Terrace Haymarket, VA 20169 1628 www.directivesystems.com 703 754 3876 K1JX DESIGNED 6 ELEMENT 50 MHZ YAGI, DSEJX6 50 INTRODUCTION The Directive Systems DSEJX6-50
PENNING FEATURES PENNING-1 SEPT/2014
PENNING PENNING-1 FEATURES Panels available in all sizes suitable for loose housing, finishing, nursery, etc. Flexible system can be easily combined with plastic panelling. Shows animals well and allows
GRILLE GUARD SPRINTER VAN (EXCLUDES X4) INCLUDES MERCEDES, FREIGHTLINER AND DODGE PARTS LIST:
PARTS LIST: 1 Grille Guard 8 12mm Hex Nuts 1 Driver/Left Side Frame Mounting Bracket 2 10-1.50mm x 25mm Button Head Bolts 1 Passenger/Right Side Frame Mounting Bracket 4 10mm x 20mm OD x 2mm Flat Washers
BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
Punch Type Clamps. 116 Clamp guards provide a smooth ID when applied to Punch-Lok center punch hose clamps. PUNCH-LOK SPECIAL ORDER NON-STOCK CLAMPS
Hose Scribe Punch Type Clamps Hose Scribe 114 HOSESCRIBE Hose Identification System The First Self-Contained,Computerized Hose Identification Tag engraving System Three Easy Steps 1. Insert one of three
LARGE SIZE RIVET NUT FAMILY
LARGE SIZE RIVET NUT FAMILY The first product family of its kind Rivet Nuts up to 3/4-10 (M20) AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES & BENEFITS Provide a Strong Thread in Thin
Linear Motion and Assembly Technologies Aluminum Framing /07. Die-Cast Foundation Brackets 3-10 & 3-11
-0 Linear Motion and ssembly Technologies luminum Framing 91 500 1 /07 Section : Profile onnectors Overview One of the greatest strengths of the osch Rexroth structural aluminum framing system is the wide
8" PIVOT. Model 8000 Pivot - Prior to Feb 2002
" PIVOT Model 000 Pivot - Prior to Feb 00 " Pivot Table of Contents Description Rev. # Pg. # Overall Assembled View... 0-0... Legs & Braces... 0-0... Ladder... 0-0... Collector Ring "J" Tube... 0-0...
Midwest Roadside Safety Facility
28 Spaces @ 75"=2100" 100' 3:1 Cut 40' 75" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 75" 300" or Two 12'-6" Section End Section 300" or Two 12'-6"
INSTALLATION INSTRUCTIONS GRILLE GUARD RAM 1500 PART # 5058/5058-2
INSTALLATION INSTRUCTIONS GRILLE GUARD PART # 5058/5058-2 PARTS LIST: Qty Description Qty Description 1 Grille Guard 8 12-1.75mm x 35mm Hex Bolts 2 Upper Frame Mounting s (for trucks without tow hooks
HO4 Surface Mount Installation Instructions Overview
Overview Step 4 Mounting to Structure Pages 5-6 Step 5 Joining Luminaires Pages 7-8 Step 1 Mounting Types & Locations Page 2 Step 6 Closing Luminaires Page 9 Helpful Video 0-10V Dimming Step 2 Identification
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 100'-0" 3:1 Cut 40'-0" 6'-3" (TYP.) 3:1 Soil Cut 3:1 1 2 3 4 5 6 7 8 9 10 25 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 26 6'-3" 25'-0" or Two Section 12-gauge End Section 25'-0"
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER
OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 1813 BENDING TABLE FOR 881 HYDRAULIC BENDER Read and understand this material before operating or servicing this bender. Failure to understand how to safely
TONGFENG FLEXIBLE CONDUIT TONGFENG FLEXIBLE CONDUIT
TONGFENG FLEXIBLE CONDUIT TONGFENG FLEXIBLE CONDUIT 1 COMPANY BREIF INDRODUCTION TONGFENG Products --- Your Professional Electrical Wiring Protection Solutions. As an industrial leader, the company offers
3616 Old Howard Co. Airport Road Big Spring, TX
3616 Old Howard Co. Airport Road Big Spring, TX 79720 432.263.3725 Table of Contents SKT 350... 1 Bill of Materials... 2 SKT Parts. 7 Downstream Anchor Terminal...... 15 Bill of Materials..... 16 DAT Parts....
Midwest Roadside Safety Facility
28 Spaces @ 75"=175'-0" 6'-3" (TYP.) 8'-0" Soil Cut 1 2 3 4 5 6 7 8 9 10 12 13 11 14 15 16 17 18 19 20 21 22 23 24 25 25 C.I.P. 26 6'-3" 25'-0" or Two Section End Section 25'-0" or Two Section End Section
Components: Dimensions / Order Codes
Heavy Twin Series Components: Dimensions / Clamp Body Profiled Design Profiled Inside Surface with Tension Clearance Clamp Body Standard Materials Polypropylene Colour: Green Material code: PP Polyamide
Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED
Solutions Inc. PA-3500 Line Captive Quarter-turn Fasteners Continuous Receptacle Strip MIL-F-25173A * APPROVED The DFCI PA-3500 Line of fasteners combine the operating convenience, predictable clamping
Hose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
99 Straight Sections 100 fittings, splices & connectors. 103 fasteners
99 Straight Sections 100 fittings, splices & connectors 102 accessories 103 Cable unway is available in two styles, tubular side rails that are lightweight yet strong and solid-bar side rails that offer
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls
INSTRUMENT MOUNTING STANDS PRODUCT CATALOG Continuous Tray Support System for Instrumentation and Controls James C. White Company, Inc. Greenville, SC PAGE 5 Standard Instrument Stands SINGLE WALL STAND
Areamaster Generation 2 HL LED Luminaire Floodlight for Hazardous Locations
Areamaster Generation HL LED Luminaire Class I, Division, Groups A, B, C, D Class I, Zone Group IIC Class II, Division and, Groups E, F, G Zone and Group IIIC Zone, Group IIIB Type R,, X, IP66/67 Applications
INSTALLATION INSTRUCTIONS 3"/4 BENT END SIDEBARS FORD F-150 SUPERCREW PART # DZ /DZ
INSTALLATION INSTRUCTIONS 09-12 FORD F-150 SUPERCREW PART # DZ 372697/DZ 372699 PARTS LIST: 1 Driver/Left Sidebar 4 1/2 Lock Washers 1 Sidebar 4 12mm x 32mm OD x 3mm Flat Washers 1 Driver/Left Mounting
NEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit
For Flexible Metal Conduit SC: Straight Squeeze Type Connector These squeeze type connectors are used to terminate flexible metal conduit to a 1/2 knockout in a dry location box or enclosure. 1/2" and
Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
A - Railing Frame Material Specifications
A - Railing Frame Material Specifications NOTE: We strongly recommend stainless steel for exterior applications. R-1 8/1/02 B Stainless Steel Spacers (For Horizontal Railing Double Post End Post using
SIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
ABW-4-SSP ABW-5-SSP 5 ABW-6-SSP 6 ABW-7-SSP 7 ABW-4-ESP ABW-5-ESP 5 ABW-6-ESP 6 ABW-7-ESP 7 ABW(*)24HSP ABW(*)36HSP. Furnished in pairs with hardware.
Snap-In Splice Plate Designed to lock into place for easy alignment and installation. Packaged in pairs with zinc plated hardware. Provided as standard with each straight and fitting. ABW--SSP ABW--SSP
Baymaster HL LED Luminaire High Bay for Hazardous Locations
Class I, Division, Group A, B, C, D Class I, Zone, Group IIC Class II, Division &, Group E, F, G Zone and Group IIIC Zone Group IIIB Applications Enclosed and gasketed fixtures suitable for use in: A wide
10-1.5mm x 40mm Hex Bolt 1 Driver/Left Front Inner Support Bracket (2WD & 4WD Vehicles W/O Skid Plate Only) 2
PARTS LIST: 1 Driver/Left sidebar 4 12mm x 32mm OD x 3mm Flat Washer 1 Passenger/Right sidebar 4 12mm x 24mm OD x 2.5mm Flat Washer 1 Driver/Left Mounting Bracket 6 12mm Lock Washers 1 Passenger/Right
INSTALLATION INSTRUCTIONS GRILLE GUARD FORD ESCAPE
INSTALLATION INSTRUCTIONS GRILLE GUARD 08-010 FORD ESCAPE PARTS LIST: 1 Grille Guard 4 10-1.50mm x 30mm Hex Bolts 1 Driver/Left Frame Mounting 4 10mm Lock Washers 1 Passenger/Right Frame Mounting 6 10mm
FASTENERS FIRST LOOSEN WITHOUT TURNING!
FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first
INSTALLATION INSTRUCTIONS SIDE BAR FORD ESCAPE & MAZDA TRIBUTE PART #
INSTALLATION INSTRUCTIONS SIDE BAR 2008-2010 FORD ESCAPE & MAZDA TRIBUTE PART # 50136 50137 PARTS LIST: 1 Driver/Left Sidebar 2 10-1.50mm x 35mm Bolt Plate 1 Passenger/Right Sidebar 2 10-1.50mm x 30mm
Thermostat Conversion Kit Data Sheet CHOICE OF INSTALLATION
22-022 Thermostat Conversion Kit Data Sheet The Thermostat Conversion Kit was designed and packaged with the serviceman in mind. It allows a quick and easy replacement of competitive devices with a new
Max. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
(6) Plastic Retainers. Passenger/Right. Passenger/Right Support Brackets
PART#R102580 PARTS LIST: 1 Driver/Left HD Running Board 4 8mm Bolt/Nut Plates 1 Passenger/Right HD Running Board 4 8mm Plastic Retainers 2 Driver/Left & Center Mount Bracket 14 8mm-1.25 x 30mm Hex Bolts
INSTALLATION INSTRUCTIONS
TEL:1-866-XANATOS INSTALLATION INSTRUCTIONS PART#: 17A110200MSS\17A110200MA MODULAR GRILL GUARD FOR NISSAN FRONTIER 05-10//PATHFINDER 05-07 1 guard, center section 1 brush guard, left side 1 brush guard,
THE ROGUE TM FUNSLIDE TM
THE ROGUE TM FUNSLIDE TM ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH ROGUE TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND POOLS ONLY. ROGUE
INSTALLATION INSTRUCTIONS
TEL -866-XANATOS INSTALLATION INSTRUCTIONS PART#: 7D5000SS\7D500A GRILL GUARD FOR DODGE SPRINTER 07-09 PARTS LIST: 8 6 Grille Guard Driver/Left Frame Mounting Passenger/Right Frame Mounting Driver/Left
Before returning this product to the store of purchase
Before returning this product to the store of purchase Contact Dee Zee if you experience the following problems: Missing Parts Installation Problems/Questions Warranty Questions 1.800.779.2102 Hours of
Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (H) Fisher 1052 Size 20 Diaphragm Rotary Actuator with H Mounting Adaptation Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications...