FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
|
|
|
- Amberly Sutton
- 5 years ago
- Views:
Transcription
1 FASTENERS
2 PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
3 Quick Reference Nuts Heavy Hex Nuts...4 Hex Nuts...5 Rod Coupling Nuts...6 Washers Fender Washers...7 Flat Washers...8 Bolts Carriage Bolts...9 Stove Bolts...10 Toggle Bolts Toggle Bolt Wings...12 Screws Drywall Screws...13 Hex Head Cap Screws Hex Lag Screws...16 Self Drilling Screws...17 Wood Screws...18 FNW.COM 3
4 Heavy Hex Nuts Grade A, Zinc Specification: ASME B Material & Mechanical Properties: Grade A per ASTM A563 Thread Requirements: ASME B1.1, UNC Nominal Size or Basic Diameter of Thread F G H Width Across Flats Width Across Corners Heavy Hex Nut Thickness Basic Max Min Max Min Basic Max Min Threads Per Inch (TPI) FNWHHNGAZ38 3/ / / FNWHHNGAZ12 1/ / / FNWHHNGAZ58 5/ / / FNWHHNGAZ34 3/ / / FNWHHNGAZ78 7/ / / FNW.COM
5 Hex Nuts Grade 2, Zinc Specification: ASME B Material & Mechanical Properties: Grade 2 per SAE J995 Thread Requirements: ASME B1.1, UNC Nominal Size or Basic Diameter of Thread F G H Width Across Flats Width Across Corners Nut Thickness Max Min Max Min Max Min Threads Per Inch (TPI) FNWHNG2Z14 1/ FNWHNG2Z516 5/ FNWHNG2Z38 3/ FNWHNG2Z12 1/ FNWHNG2Z58 5/ FNWHNG2Z34 3/ FNWHNG2Z78 7/ FNW.COM 5
6 Rod Coupling Nuts Zinc Specification: ASME B Material: Carbon Steel Thread Requirements: ASME B1.1 UNC Nominal Size F G H Width Across Flats Width Across Corners Nut Thickness Basic Plus Minus Basic FNWRCZ14 1/4 7/ /8 10 FNWRCLZ38 3/8 1-3/ /8 Long 10 FNWRCZ38 3/8 1-1/ /4 10 FNWRCLZ12 1/2 1-3/ /8 Long 10 FNWRCZ12 1/2 1-1/ /4 10 FNWRCZ58 5/8 2-1/ /8 12 FNWRCZ34 3/4 2-1/ /4 4 FNWRCZ78 7/8 2-1/ /2 4 Style Reducing Rod Couplings Nominal Size F G H Width Across Flats Width Across Corners Nut Thickness Size 1 Size 2 Basic Plus Minus Basic FNWRCRZ3814 1/4 3/8 9/ Reducing 10 FNWRCRZ1238 3/8 1/2 11/ /4 Reducing 10 FNWRCRZ5812 1/2 5/8 13/ /4 Reducing 10 Style 6 FNW.COM
7 Fender Washers Zinc Specification: ASME B A B C Nominal Size (ID x OD) Inside Diameter Outside Diameter Thickness Basic Max Min Basic Max Min Basic Max Min FNWFENWZ /2 x 1-1/ FNWFENWZ122 1/2 x FNWFENWZ141 1/4 x FNWFENWZ /4 x 1-1/ FNWFENWZ /4 x 1-1/ FNWFENWZ3161 3/16 x FNWFENWZ /16 x 1-1/ FNWFENWZ342 3/4 x FNWFENWZ /8 x 1-1/ FNWFENWZ /8 x 1-1/ FNWFENWZ382 3/8 x FNWFENWZ /16 x 1-1/ FNWFENWZ /16 x 1-1/ FNW.COM 7
8 Flat Washers USS Type A, Zinc Specification: ASME B Manufactured to United States Standard (USS) specification, and are suitable for use in industrial application such as manufacturing, maintenance and repair. Nominal Size Basic A B C Inside Diameter Outside Diameter Thickness Tolerance Tolerance Basic Plus Minus Plus Minus Basic Max Min FNWFLWZ14 1/ FNWFLWZ516 5/ FNWFLWZ38 3/ FNWFLWZ12 1/ FNWFLWZ58 5/ FNWFLWZ34 3/ FNWFLWZ78 7/ FNWFLWZ FNWFLWZ / FNWFLWZ / FNWFLWZ / Pack Qty 8 FNW.COM
9 Carriage Bolts Grade A, Zinc Specification: ASME B18.5 Bolts less than or equal to 6 in length shall be fully threaded Bolts longer than 6 shall have 6 of fully formed threads Material & Mechanical Properties: Grade A per ASTM A307 Thread Requirements: ASME B1.1, UNC Nominal Size or Basic Bolt Diameter E A H O P Q R Body Diameter Head Diameter Head Height Square Width Square Depth Corner Radius on Square Max Min Max Min Max Min Max Min Max Min Max Max 3/ / Fillet Radius FNWCBZ381 Diameter L Nominal Length 1 10 FNWCBZ /2 10 3/8 FNWCBZ FNWCBZ FNWCBZ FNWCBZ /2 FNWCBZ FNWCBZ FNW.COM 9
10 Stove Bolts Zinc Material & Mechanical Properties: ASME B Thread Requirements: ASME B1.1, UNC. L A H J T Nomial Size or Basic Bolt Diameter Bolt Length Drive Type Head Head Diameter Head Height Slot Width Slot Depth Pack Qty Max Min Max Min Max Min Max Min FNWSBRHZ FNWSBRHZ / Slotted Round FNWSBRHZ FNW.COM
11 Toggle Bolts Zinc Wing Material & Mechanical Properties: Low carbon steel Screw Material & Mechanical Properties: Low carbon steel Wing Threads: ASME B1.1, 2B Screw Threads: ASME B1.1, 2A Product Marking: Wing marked with thread size Nominal Size D Diameter L Length Max Min Max Min Screw Length Drill Size FNWTBZ143 1/ /8 25 FNWTBZ144 1/ /8 25 FNWTBZ146 1/ /8 25 FNWTBZ383 3/ /8 10 FNWTBZ384 3/ /8 10 FNWTBZ386 3/ /8 10 FNW.COM 11
12 Toggle Bolt Wings Zinc Material: Low carbon steel Thread Requirements: ASME B1.1, 2B Screw Threads: ASME B1.1, 2A Product Marking: Product marked with thread size Altcode Nominal Size A B C D L J Drill Size Min Max Min Max Min Max Min Max Min Max Min Max FNWTWZ14 1/ /8 25 FNWTWZ38 3/ /8 25 Pack Qty 12 FNW.COM
13 Drywall Screws Black Phosphate Material & Mechanical Properties: Low carbon steel Performance: ASTM C1002 Thread Requirements: ASME B Finish: Black Phosphate: 48 hours to red rust FNWDWSCB61 Nominal Size Head FNWDWSCB6158 #6 Bugle Phillips 1-5/8 Coarse 1 lb. Drive Type L Length Thread Type Bugle Phillips 1 Coarse 1 lb. FNWDWSCB6118 Bugle Phillips 1-1/8 Coarse 1 lb. FNWDWSCB6114 Bugle Phillips 1-1/4 Coarse 1 lb. FNWDWSFB6158 Bugle Phillips 1-5/8 Fine 1 lb. FNWDWSCB62 Bugle Phillips 2 Coarse 1 lb. FNWDWSFB62 Bugle Phillips 2 Fine 1 lb. FNWDWSCB8212 Bugle Phillips 2-1/2 Coarse 1 lb. FNWDWSFB8212 Bugle Phillips 2-1/2 Fine 1 lb. #8 FNWDWSCB83 Bugle Phillips 3 Coarse 1 lb. FNWDWSFB83 Bugle Phillips 3 Fine 1 lb. FNW.COM 13
14 Hex Head Cap Screws Grade 2/5, Zinc Specification: ASME B Material & Mechanical Properties: Grade 2 / 5 per SAE J429 Thread Requirements: ASME B1.1, UNC Hex Head Cap Screws feature a washer face under the head and a chamfered point, whereas a Hex Bolt does not have a washer face or chamfered threads. Nominal Size or Basic Product Diameter E F G H J LT Y Body Diameter Width Across Flats Width Across Corners Head Height Wrenching Height Thread Length Transition Thread Length Max Min Basic Max Min Max Min Basic Max Min Min Nom Nom Ref Max 3/ / / / / / / / Total Runout Bearing Surface 7/ / " and less Over 6" Identification Grade Mark Specification Fastener Description Material Nominal Size Range Proof Load (psi) Mechanical Properties Yield Strength Min (psi) Tensile Strength Min (psi) SAE J429 Grade 2 Bolts & Cap Screws Low or Medium Carbon Steel 1/4 thru 3/4 over 3/4 thru 1-1/2 55,000 33,000 57,000 36,000 74,000 60,000 SAE J429 Grade 2 Bolts & Cap Screws Medium Carbon Steel, Quenched & Tempered 1/4 thru 3/4 over 3/4 thru 1-1/2 85,000 74,000 92,000 81, , , FNW.COM
15 Hex Head Cap Screws FNWCSG2Z3812 Diameter GRADE 2 L Nominal Length 1/2 25 FNWCSG2Z3834 3/4 25 FNWCSG2Z FNWCSG2Z /4 25 3/8 FNWCSG2Z /2 25 FNWCSG2Z FNWCSG2Z /2 25 FNWCSG2Z FNWCSG2Z FNWCSG2Z /2 10 FNWCSG2Z /2 FNWCSG2Z /2 4 FNWCSG2Z /4 4 FNWCSG2Z FNWCSG2Z /2 4 FNWCSG2Z /4 4 FNWCSG2Z FNWCSG2Z /4 4 FNWCSG2Z /2 4 FNWCSG2Z /8 2-3/4 4 FNWCSG2Z FNWCSG2Z /2 4 FNWCSG2Z FNWCSG2Z /2 2 FNWCSG2Z FNWCSG2Z /4 4 FNWCSG2Z FNWCSG2Z /4 4 FNWCSG2Z /2 4 FNWCSG2Z /4 4 FNWCSG2Z FNWCSG2Z /4 3-1/4 2 FNWCSG2Z /2 2 FNWCSG2Z /4 2 FNWCSG2Z FNWCSG2Z /2 2 FNWCSG2Z FNWCSG2Z /2 2 FNWCSG2Z /4 2 FNWCSG2Z /2 2 FNWCSG2Z /4 2 FNWCSG2Z FNWCSG2Z /8 3-1/2 2 FNWCSG2Z /4 2 FNWCSG2Z FNWCSG2Z /2 2 FNWCSG2Z /2 2 FNWCSG5Z381 Diameter GRADE 5 L Nominal Length 1 25 FNWCSG5Z /4 25 FNWCSG5Z /2 25 3/8 FNWCSG5Z /2 25 FNWCSG5Z FNWCSG5Z FNWCSG5Z FNWCSG5Z /2 10 FNWCSG5Z122 1/ FNWCSG5Z /2 4 FNWCSG5Z /2 4 FNWCSG5Z /2 4 FNWCSG5Z /4 4 FNWCSG5Z FNWCSG5Z /8 2-1/2 4 FNWCSG5Z /4 2 FNWCSG5Z FNWCSG5Z /2 4 FNWCSG5Z /4 4 FNWCSG5Z FNWCSG5Z /4 4 FNWCSG5Z /2 4 3/4 FNWCSG5Z FNWCSG5Z /2 2 FNWCSG5Z FNWCSG5Z /2 2 FNWCSG5Z /2 2 FNWCSG5Z /8 FNWCSG5Z /2 2 FNWCSG5Z FNW.COM 15
16 Hex Lag Screws Grade 1, Zinc Specification: ASME B Material & Mechanical Properties: Grade 1 per SAE J429 E F G H R Nomial Size or Basic Bolt Diameter Body or Shoulder Diameter Width Across Flats Width Across Corners Head Height Fillet Radius Max Min Basic Max Min Max Min Basic Max Min Max Min 1/ / / / / / / / / FNWLSZ14112 Diameter Length 1-1/2 12 FNWLSZ /4 FNWLSZ /2 12 FNWLSZ FNWLSZ FNWLSZ /2 12 FNWLSZ382 3/ FNWLSZ /2 12 FNWLSZ FNWLSZ FNWLSZ123 1/ FNWLSZ FNW.COM
17 Self Drilling Screws Hex Washer Head Unslotted Specification: ASME B Material & Mechanical Properties: SAE J78 Nominal Size Head A Hex Drive B Washer Diameter Drive Type L Threads Per Inch (TPI) Material Finish FNWTEKHWZ812 #8 Hex Washer Head 1/4 1/3 Hex 1/2 18 Z/PLT 50 FNWTEKHWZ81 #8 Hex Washer Head 1/4 1/3 Hex 1 18 Z/PLT 50 FNWTEKHWZ1034 #10 Hex Washer Head 5/16 2/5 Hex 3/4 16 Z/PLT 50 FNWTEKHWZ101 #10 Hex Washer Head 5/16 2/5 Hex 1 16 Z/PLT 50 FNWTEKHWZ10112 #10 Hex Washer Head 5/16 2/5 Hex 1-1/2 16 Z/PLT 50 FNWTEKHWZ141 #14 Hex Washer Head 3/8 1/2 Hex 1 14 Z/PLT 50 FNWTEKHWZ14114 #14 Hex Washer Head 3/8 1/2 Hex 1-1/4 14 Z/PLT 50 FNWTEKHWZ14112 #14 Hex Washer Head 3/8 1/2 Hex 1-1/2 14 Z/PLT 50 Length Pack Qty FNW.COM 17
18 Wood Screws Flat Head Material & Mechanical Properties: ASME B Performance: ASTM C1002 Thread Requirements: ASME B Finish: Zinc: Fe/Zn 3AN per ASTM F1941/F1941M Brass: Copper content 57%, maximum alloying elements 5%, remainder zinc. Nominal Size Head Drive Type L Thread Type Material Finish FNWWSZ10112 #10 Flat Head Phillips #3 1-1/2 Coarse Carbon Steel Zinc Plating 50 FNWWSB102 #10 Flat Head Phillips #3 2 Coarse Brass 50 FNWWSZ102 #10 Flat Head Phillips #3 2 Coarse Carbon Steel Zinc Plating 50 FNWWSB12112 #12 Flat Head Phillips #3 1-1/2 Coarse Brass 50 FNWWSZ12112 #12 Flat Head Phillips #3 1-1/2 Coarse Carbon Steel Zinc Plating 50 FNWWSB122 #12 Flat Head Phillips #3 2 Coarse Brass 50 FNWWSZ122 #12 Flat Head Phillips #3 2 Coarse Carbon Steel Zinc Plating 50 FNWWSB12212 #12 Flat Head Phillips #3 2-1/2 Coarse Brass 25 FNWWSZ12212 #12 Flat Head Phillips #3 2-1/2 Coarse Carbon Steel Zinc Plating 25 FNWWSZ14112 #14 Flat Head Phillips #3 1-1/2 Coarse Carbon Steel Zinc Plating 50 FNWWSZ1422 #14 Flat Head Phillips #3 2 Coarse Carbon Steel Zinc Plating 50 FNWWSZ1423 #14 Flat Head Phillips #3 3 Coarse Carbon Steel Zinc Plating 25 Length Pack Qty 18 FNW.COM
19 Your Pipe Products Source Since FNW was established in 1979, we have been dedicated to providing quality products for industrial and commercial applications. With a basic philosophy to provide a product suited to the needs of the end user, FNW has built a product offering with an innovative approach to the market and has continued to grow its product range to meet those needs. We continue to add products that may not be reflected in this catalog. Therefore, please visit our website at fnw.com for updates and the latest additions to our product offerings. For technical assistance, contact: Jefferson Avenue, Newport News, VA Phone (757) Your Local Distributor/Representative Is: 2018 FNW PL-FNW-107 The FNW logo is a trademark of Ferguson Enterprises, Inc., PL Sourcing, PO Box 2778, Newport News, VA The contents of this publication are presented for information purposes only, and while effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, expressed or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice. Always verify that you have the most recent product specifications or other documentation prior to the installation of these products. FNW.COM 19
20 FNW.COM
Hex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
Technical Specifications Guide For Fasteners
fastrite_2011_fut.ai 8/4/11 4:29:01 PM Technical Specifications Guide For Fasteners C M Y CM MY CY CMY K Important Disclaimer All of the information provided in this publication is intended for reference
Hilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2012 Hilti North American MI/MQ Technical Guide Volume 3. For complete details on this product, including data development, general suitability, installation, and corrosion
01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
METRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
Sockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws...
imensions; Mechanical & Performance Requirements Socket Head Cap Screws... 2-4 Body & Grip Lengths - Socket Cap Screws... 5-6 Low Head Socket Cap Screws... 7 Button Head Socket Cap Screws... 8 Flat Head
Limited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
Table of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
AUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step. Drills, Taps, & Bits. Hex Capscrews Grade 8 Grade 5 Grade 2 A325 A490 Specials
AU-VE-CO Bolts Carriage Elevator Eye Hex Shoulder Specials Square Head Step Concrete Anchoring Adhesives Anchor Bolts Drop Ins Wedge Pins Cotter Dowel Hitch Spring Roll Taper Pipe Fittings Power Coil EZ
Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
![Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1](/thumbs/75/72528177.jpg "Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1")
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
Fasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
GLOBALLOY THREADED ROD
GLOBALLOY THREADED ROD DESIGNED AND ENGINEERED TO REDUCE DOWNTIME AND MAINTENANCE COSTS SPECIAL ALLOY STEEL Over 145,000 PSI tensile strength in normal temperature application Minimum tensile strength
3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
SURFACE VEHICLE STANDARD
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J429 Issued 1949-01 Revised 1999-01 REV. JAN1999 Submitted for recognition as an American National Standard Superseding J429 MAY1998
AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
ODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
REPORT HOLDER: INTERCORP DBA OF U.S. NITTO 641 NORTH POPLAR ORANGE, CALIFORNIA EVALUATION SUBJECT: STRONG POINT SCREWS
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3528 Reissued 07/2017 This report is subject to renewal 07/2019. DIVISION: 05 00
Fasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products
INFASCO CAP SCREWS The Bolt of Choice for the Heavy Equipment Industry Infasco is the largest manufacturer of Grade 5 and Grade 8 Cap Screws in North America. They are accepted and used by all branches
DIVISION: METALS SECTION: METAL FASTENINGS DIVISION: FINISHES SECTION: FASTENERS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1408 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 05 00
HEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1. Vertigo (Sammy) Rod hangars. Cap Screws. Drop-In Anchors. Coach Screws.
ANCHORHD- Heavy Duty Anchors RW List Prices Page L - 1 Cap s Vertigo (Sammy) Rod hangars 03512000 1/4 20pk Zinc Plated Cap 3.18 03501210 3/8 15pk Zinc Plated Cap 4.78 03501220 1/2 10pk Zinc Plated Cap
Section COUPLINGS AND COUPLING ADAPTERS. This Section covers couplings and coupling adapters for ductile iron and steel pipe.
PART 1 GENERAL 1.01 SUMMARY Section 15155 This Section covers couplings and coupling adapters for ductile iron and steel pipe. 1.02 MEASUREMENT AND PAYMENT A. No separate payment for Work performed under
Installation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
Precision Manufacturing
Precision Manufacturing 216 North Main Street. Freeport, NY 11520 Phone: 888-260-7466 / Fax: 516-771-6444 sales@ondrivesus.com www.ondrivesus.com Know Linear Your Shaft Shoulder Supports Screws By Dennis
Anchors. Easy Screw-In Style. Plastic & Die-cast Zinc EASY SCREW-IN ANCHOR. Specifications are for reference purposes only.
Plastic & Die-cast Zinc Easy Screw-In Style nchors D ESY SCREW-IN NCOR ITW Buildex* D Ultimate Tensile Strength Ultimate Shear Strength ead nchor ength Maximum Fixture Thickness Gypsum Thickness Gypsum
Disclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1
![Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1](/thumbs/78/77316211.jpg "Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1")
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
TENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
Swivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
Peco Fasteners 3/8 Internal Plug Drop In 50 Per Jar 3/8-16 SMART DROP IN ANCHOR ZINC
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-794 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category 6337J 3/8-6 Smart Drop In Zinc Peco Fasteners,
REPORT HOLDER: SFS INTEC 1045 SPRING STREET WYOMISSING, PENNSYLVANIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3870 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays
Installation and Assembly: Flat Video Wall Mount For 40" to 65" Flat Panel Displays Model: DS-VW665 Maximum Load Capacity: 125 lb (57 kg) 1 of 11 ISSUED: 03-22-12 SHEET #: 125-9288-4 06-25-13 NOTE: Read
MILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A
INCH-POUND MS16995H 25 April 1997 SUPERSEDING MS16995G 27 June 1995 MILITARY SPECIFICATION SHEET SCREW, CAP, SOCKET HEAD- HEXAGON, CORROSION RESISTANT STEEL, UNC-3A This specification is approved for use
Superstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
K/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
Swivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
Chapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING
INCH-POUND AN924 Rev 13 14 April 2014 SUPERSEDING AN924 Rev 12 w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE, BULKHEAD AND UNIVERSAL FITTING Reinstated after 14 June 2012. Inactive
Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.
Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped
Hang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
Standard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
INSTALL INSTRUCTIONS WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES NEWAGE STEEL WELDED CABINETRY
NEWAGE STEEL WELDED CABINETRY WELCOME TO THE NEWAGE PERFORMANCE CABINETRY SERIES ALL CABINETS MUST BE MOUNTED TO STUDS ON A SECURE WALL, AS PER THESE INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN SERIOUS
#3 Domed Head Plow Bolt Standard Thread and Body Length
#3 Domed Plow Bolt Standard Thread and Body Length Flat vs Dome Plow Bolts Flat (per ASME B18.9) Domed Designs Supplied by Earnest (per Cat 1E44) Industry practice is to call a # 3 head plow bolt that
Designation: F
Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under
Pipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings
Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings
PIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
Fastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
METRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC Black Oxide MACHINE SCREWS (Stainless) 100º 82º MACHINE SCREWS & SEMS (Steel) Combination Pan 100 82º Phillips Fillister Phillips
Standard Specification for Carbons and Alloy Steel Nuts 1
Designation: A 563 07 Standard Specification for Carbons and Alloy Steel Nuts 1 This standard is issued under the fixed designation A 563; the number immediately following the designation indicates the
1/2/2016. Lecture Slides. Screws, Fasteners, and the Design of Nonpermanent Joints. Reasons for Non-permanent Fasteners
Lecture Slides Screws, Fasteners, and the Design of Nonpermanent Joints Reasons for Non-permanent Fasteners Field assembly Disassembly Maintenance Adjustment 1 Introduction There are two distinct uses
Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.
Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger
ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage
5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
LENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
UP43 LEARN-A-L0T (NATURAL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
SECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
C-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
Letter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
Rayport G Eco Dealer Kit
Rayport G Eco Dealer Kit Installation Guide www.aetenergy.com Supporting a Cleaner, Greener Tomorrow 1. Table of Contents 1. Table of Contents P2 2. Installer Notes P3 3. Parts List P4-7 4. Tool List P8
Midwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
Attachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
UniSert Kit Assortments
Repair Kits UniSert Kit Assortments Each assortment contains the insert tools you need. The convenient durable case permits super clear storage and organization. Threaded Inserts UniSert Kit Assortments
INSTALLATION GUIDE 3020-FTH CONTOURED PARTITION
INSTALLATION GUIDE 3020-FTH CONTOURED PARTITION Transit Partition ( Tempered Glass Window, Aluminum ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.1.1 Unpack components; compare with the bill
CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
ICC-ES Evaluation Report
ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:
Fastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
REPORT HOLDER: SENCO BRANDS INC IVY POINTE BOULEVARD CINCINNATI, OHIO EVALUATION SUBJECT: SENCO SELF-DRILLING AND SELF-PIERCING SCREWS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3558 Reissued 06/2017 This report is subject to renewal 06/2019. DIVISION: 05 00
Dimensions Mechanical and Performance Requirements. Drop-In Anchors Hollow Wall, Steel Regular Style Drive Style...
Dimensions Mechanical and Performance Requirements Drop-In Anchors... 257 Hollow Wall, Regular Style... 258 Drive Style... 259 Hollow Wall, Plastic Ribbed... 260 Conical, Light Duty... 261 Fluted, Light
19" EIA SRD Swing Rack Installation Instructions
19" EIA SRD Swing Rack Installation Instructions (UL60950-1/UL2416 SRD Series Equipment Rack) 1-866-TRY-GLCC (879-4522) PREFACE This manual is provided to prevent service personnel from committing an act
COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS)
INCH-POUND 30 May 2002 SUPERSEDING A-A-55804 11 March 1996 COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS) The General Services Administration has authorized the use of this commercial item
Steel Casework Metal Framing System
MISCELLANEOUS ITEMS Continuous Slot Metal Framing System Installs quickly Completely adjustable Re-usable Eliminates all welding, drilling and use of special tools G23 METAL FRAMING SYSTEM 1. Place the
General Information. Ball Curb Valve
General Information 1. All Jones Curb Valves are manufactured in accordance with the AWWA Standard C-800-latest revision. 1. Copper Alloy CDA No. C83600 (85-5-5-5) 2. Copper Alloy CDA No. 89520 (Low Lead)
ESR-1271* Reissued September 1, 2013 This report is subject to renewal July 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 4-6587 (56) 699-054 ESR-7* Reissued September, 0 This report is subject to renewal July, 05. A Subsidiary of the International Code Council DIVISION: 05 00
SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
test TECHNICAL NOTE On Cold-Formed Steel Construction $5.00 Cold-Formed Steel Engineers Institute Washington, DC www.cfsei.org 866-465-4732 SCREW FASTENER SELECTION FOR COLD-FORMED STEEL FRAME CONSTRUCTION
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
PART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
UNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
UP4 LEARN-A-LOT (PLAYFUL) Parts List DESCRIPTION 90 ANGLE BRACKET DOOR WINDOW MUSIC CATERPILLAR CIRCLE FRAME CIRCLE MIRROR YELLOW STAINED GLASS RED STAINED GLASS SQUARE TRIANGLE SPIRAL WHEEL SQUARE MIRROR
HEAVY DUTY 20 STEEL CABINET
HEAVY DUTY 20 STEEL CABINET ASSEMBLY INSTRUCTIONS TWO DOOR UPPER CABINET 12-2013 List Part No Description Qty Image TWO DOOR UPPER CABINET Part No Description Qty Image RP-3015 Rear Slotted 2 EH-01 Hinge
Special Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
MODEL 83 Pail Handler
MORSE MFG. CO., INC. 727 West Manlius Street P.O. Box 518 East Syracuse, NY 13057-0518 Phone: 315-437-8475 Fax: 315-437-1029 Email: service@morsemfgco.com Website: www.morsemfgco.com COPYRIGHT 2005 MORSE
Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000
INSTALLATION INSTRUCTIONS HEAVY DUTY TILT WALL MOUNT Model: PPH-2000 Specifications: Accomodates Akira and Orion 84" displays without interface bracket; accomodates other large flat panel displays with
TECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
Owner s Manual CD-42 CULTIVATING DISC MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual CD-4 CULTIVATING DISC IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA
Government Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
Sigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings