HOLD IT. EVEN PRESSURE. ODD SIZES. INTRODUCING THE AUTO-PRO AUTO-ADJUST TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL

Transcription

1 HOLD IT. INTRODUCING THE AUTO-PRO TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL EVEN PRESSURE. ODD SIZES. PATENTED MECHANISM armor-tool.com TABLE OF CONTENTS Auto-Pro Toggle Clamps: STC-H0 STC-H0 STC-HH70: AUTO-PRO MEDIUM-PROFILE HORIZONTAL TOGGLE CLAMP WITH HORIZONTAL BASE PLATE STC-HA20 STC-HA50: AUTO-PRO HORIZONTAL TOGGLE CLAMP WITH ANGLED BASE PLATE STC-HV20 STC-HV50: AUTO-PRO HORIZONTAL TOGGLE CLAMP WITH VERTICAL BASE PLATE STC-IH5 STC-I: AUTO-PRO IN-LINE TOGGLE CLAMP WITH HORIZONTAL BASE PLATE STC-IHA15 STC-IHA25: AUTO-PRO IN-LINE TOGGLE CLAMP WITH ANGLED BASE PLATE Auto-Pro Dog Peg Clamping Tools: P7-HH: AUTO-PRO HORIZONTAL DOG CLAMP P7-IL: AUTO-PRO IN-LINE DOG CLAMP PBB-4 PBB-12: AUTO-PRO 4- AND 12-INCH DOG BRACKETS PF-4 PF-8 PF-14: AUTO-PRO 4-, 8- AND 14-INCH DOG FENCES P-20MM-3 P-20MM-7.5 P-.75: AUTO-PRO DOG PEGS

2 HORIZONTAL TOGGLE CLAMP WITH HORIZONTAL BASE PLATE HOLD EVERYTHING. Auto-adjust means the clamp maintains consistent pressure while automatically adjusting to different-sized workpieces. Rotate the adjustment screw to achieve the required clamping pressure. One Armor Auto-Adjust toggle clamp replaces several standard toggle clamps because of its expanded range of clamping force and height, which means fewer tools, fixtures and work stations. Adjustable mounting holes on the base plate accommodate most standard toggle mounting patterns. Soft-grip is designed for comfort. Eliminates the need for constant adjustments. Increases productivity and safety. Opening Fastener STC-H0 13/ lbs* 450 lbs 0.6 lbs 3/16 or M5 STC-H0 1 9/ lbs STC-HH70 2 3/8 1.2 lbs STC-H0 STC-H0 STC-H0 STC-HH70 STC-H0 STC-HH70 Height of spindle, cpl. Height of base arm (external) arm (internal) Width of 2-comp Width of base plate spacing Diameter of hole Height of extension arm Width of elongated hole Height of (open) spacing 3 Height of (closed) Length of 2-comp plate 2 Pressure plate diameter plate 1 Spindle adjustment range Length of extension arm spacing 2 Total length Ø STC-H STC-H STC-HH * Variable and dependent on spindle settings, pressure screw setting, force applied, etc. Some small spindle adjustments may be required to achieve maximum clamp opening. STC-HH-SSRev1 AUTO-PRO MEDIUM-PROFILE HORIZONTAL TOGGLE CLAMP WITH HORIZONTAL BASE PLATE

3 HORIZONTAL TOGGLE CLAMP WITH ANGLED BASE PLATE STC-HA20 STC-HA50 HOLD EVERYTHING. Auto-adjust means the clamp maintains consistent pressure while automatically adjusting to different-sized workpieces. Rotate the adjustment screw to achieve the required clamping pressure. One Armor Auto-Adjust toggle clamp replaces several standard toggle clamps because of its expanded range of clamping force and height, which means fewer tools, fixtures and work stations. Adjustable mounting holes on the base plate accommodate most standard toggle mounting patterns. Soft-grip is designed for comfort. Eliminates the need for constant adjustments. Increases productivity and safety. Fastener STC-HA20 13/ lbs* 450 lbs 0.6 lbs 3/16 or M5 STC-HA50 1 9/ lbs Opening Length of 2-comp Height of (closed) Height of (open) Height of extension arm Height of spindle, cpl. Height of base arm (external) arm (internal) Width of 2-comp STC-HA STC-HA Diameter of hole plate 2 Width of elongated hole plate 1 spacing 3 spacing 2 Pressure plate diameter spacing 1 Spindle adjustment range Width of base plate Length of extension arm Total length Ø * Variable and dependent on spindle settings, pressure screw setting, force applied, etc. Some small spindle adjustments may be required to achieve maximum clamp opening. STC-HA-SSRev1 AUTO-PRO HORIZONTAL TOGGLE CLAMP WITH ANGLED BASE PLATE

4 HORIZONTAL TOGGLE CLAMP WITH VERTICAL BASE PLATE HOLD EVERYTHING. Auto-adjust means the clamp maintains consistent pressure while automatically adjusting to different-sized workpieces. Rotate the adjustment screw to achieve the required clamping pressure. One Armor Auto-Adjust toggle clamp replaces several standard toggle clamps because of its expanded range of clamping force and height, which means fewer tools, fixtures and work stations. Adjustable mounting holes on the base plate accommodate most standard toggle mounting patterns. Soft-grip is designed for comfort. Eliminates the need for constant adjustments. Increases productivity and safety. Fastener STC-HV20 13/ lbs* 450 lbs 0.6 lbs 3/16 or M5 STC-HV50 1 9/ lbs Opening Ø STC-HV Height of base Height of extension arm Diameter of hole Width of elongated hole 0.97 spacing spacing 1 STC-HV T7-Vertical Base [STC-HV50] LINEWORK (EXAMPLE FOR SELLSHEET) Width of 2-comp spacing 3 Width of base plate arm (internal) arm (external) Height of spindle, cpl. plate 2 Height of (open) plate 1 Height of (closed) Length of 2-comp Pressure plate diameter Spindle adjustment range Length of extension arm Total length * Variable and dependent on spindle settings, pressure screw setting, force applied, etc. Some small spindle adjustments may be required to achieve maximum clamp opening. STC-HV-SSRev1 AUTO-PRO HORIZONTAL TOGGLE CLAMP WITH VERTICAL BASE PLATE STC-HV20 STC-HV50

5 IN-LINE TOGGLE CLAMP WITH HORIZONTAL BASE PLATE STC-IH5 STC-I HOLD EVERYTHING. Auto-adjust means the clamp maintains consistent pressure while automatically adjusting to different size workpieces. Rotate the adjustment screw to achieve the required clamping pressure. One Armor Auto-Adjust toggle clamp replaces several standard toggle clamps because of its expanded range of clamping force and height, which means fewer tools, fixtures and work stations. Adjustable mounting holes on the base plate accommodate most standard toggle mounting patterns. Soft-grip is designed for comfort. Eliminates the need for constant adjustments. Increases productivity and safety. Opening Fastener STC-IH5 3/ lbs* 450 lbs 0.6 lbs 3/16 or M5 STC-I 3/4 1.1 lbs Length of 2-comp Height of (closed) Height of (open) Height of extension arm Height of spindle, cpl Height of base STC-IH STC-I spacing 3 spacing 2 spacing Diameter of hole plate 2 Width of elongated hole plate 1 Width of base plate Width of 2-comp Pressure plate diameter arm (internal) Spindle adjustment range arm (external) Length of extension arm Total length (All measurements in inches) Ø 0.22 * Variable and dependent on spindle settings, pressure screw setting, force applied, etc. Some small spindle adjustments may be required to achieve maximum clamp opening. STC-IHH-SSRev1 AUTO-PRO IN-LINE TOGGLE CLAMP WITH HORIZONTAL BASE PLATE

6 IN-LINE TOGGLE CLAMP WITH ANGLED BASE PLATE STC-IHA15 STC-IHA25 HOLD EVERYTHING. Auto-adjust means the clamp maintains consistent pressure while automatically adjusting to different-sized workpieces. Rotate the adjustment screw to achieve the required clamping pressure. One Armor Auto-Adjust toggle clamp replaces several standard toggle clamps because of its expanded range of clamping force and height, which means fewer tools, fixtures and work stations. Adjustable mounting holes on the base plate accommodate most standard toggle mounting patterns. Soft grip is designed for comfort. Eliminates the need for constant adjustments. Increases productivity and safety. Fastener STC-IHA15 3/ lbs* 450 lbs 0.6 lbs 3/16 or M5 STC-IHA25 3/4 1.2 lbs Opening STC-IHA Diameter of hole Width of elongated hole 7.00 spacing 3 STC-IHA15 spacing 2 spacing 1 Height of (closed) Width of base plate Length of 2-comp Width of 2-comp plate 2 arm (internal) plate 1 arm (external) Ø Height of base Pressure plate diameter Height of spindle, cpl Spindle adjustment range Height of extension arm Length of extension arm Height of (open) Total length (All measurements in inches) * Variable and dependent on spindle settings, pressure screw setting, force applied, etc. Some small spindle adjustments may be required to achieve maximum clamp opening. STC-IHA-SSRev1 AUTO-PRO IN-LINE TOGGLE CLAMP WITH ANGLED BASE PLATE

7 HORIZONTAL DOG CLAMP VERSATILE 7.5 DOG PEG P7-HH AUTO-PRO HORIZONTAL DOG CLAMP ARMOR TECHNOLOGY Adjustable Clamping Force: The integrated clamping force adjustment screw is used to adjust a wide range of clamping pressures of lbs. Pivoting Spindle: Armor s Pivoting Spindle automatically adjusts to variations in workpiece dimensions while maintaining clamping pressure. Large Soft-Grip Handle: Horizontal features soft insets for maximum grip and comfort. Introducing Armor Tool s new Horizontal Dog Clamp featuring patented Auto-Adjust Technology mounted on a extended Dog Peg. This versatile tool allows clamping on and above the table. P7-HH Auto-Pro Horizontal Dog Clamp is fitted with a 7.5 Spiral Aluminum Dog Peg that inserts into a Dog hole. This versatile clamp has the ability to extend up to 5.5 above the worktable surface and can rotate 360 degrees, allowing for a wide range of clamping applications. Eliminates the need for constant readjustment and enables the clamp to maintain clamping pressure regardless of material thickness. Clamping Height Versatile Aluminum Dog Peg: Inserts into any 3/4 Dog hole. If you do not have a Dog Peg Table, simply drill a 3/4 hole in any worktable. Can also be used with Armor s Dog Peg Bracket mounted to your table. Interchangeable Dog Pegs available in 7.5 x 20mm, 3 x 20mm and 3 x 3/4, sold separately. P7-HH lbs* 550 lbs 1.5 lbs 3/4 peg hole Fits 3 x 3/4 3 x 20MM 7.5 x 20MM * Variable depending on the pressure screw setting and the force applied. P7-HH-SSRev1

8 IN-LINE DOG CLAMP ROTATES 360 DEGREES P7-IL ARMOR TECHNOLOGY P7-IL Auto-Pro In-Line Dog Clamp is fitted with a Split Dog Peg that inserts and tightens into a Dog hole. Eliminates the need for constant readjustment and enables the clamp to maintain clamping pressure regardless of material thickness. The hardened steel Push Rod applies consistent pressure over a range of material thicknesses up to Use with Armor Dog Fences to brace material. Great for securing long panels. Adjustable Clamping Force: The integrated clamping force Versatile Split Dog Peg: Allows clamping wherever a adjustment screw is used to create a wide range of clamping 20mm or 3/4 Dog hole is present and has the ability pressures of lbs. Works with any peg table (20mm to rotate 360 degrees, enabling quick setups. If you and 3/4 holes). To engage clamp, set push bar against do not have a peg table, simply drill a 3/4 hole in material and press down on the. any worktable. Hardened Steel Push Rod: Adjusts in and out quickly to hold varying shapes and sizes. Extends up to 3.5". Large Soft-Grip Handle: Horizontal features soft insets for maximum grip and comfort. Hardened Plastic Tip with Non-Marring Pad: Center notch for secure corner clamping. Also holds rounded materials. Rotating Lock Knob: Secures clamp to Dog hole. Model No. Clamping Thickness Fits P7-IL lbs 20mm or 3/4 peg hole * Variable depending on the pressure screw setting and the force applied. P7-IL-SSRev1 AUTO-PRO IN-LINE DOG CLAMP Introducing Armor Tool s new In-Line Dog Clamp featuring patented Auto-Adjust Technology mounted on a Dog Peg. Rotates 360 degrees, allowing for a wide range of clamping applications.

9 DOG BRACKETS GREAT FOR AUTO-PRO DOG CLAMPS FITS 3/4 DOG HOLES PBB-4 PBB-12 AUTO-PRO 4- AND 12-INCH DOG BRACKETS ARMOR 4- AND 12-INCH DOG BRACKETS Armor Auto-Pro Dog Brackets are a perfect way to add the versatility of Armor Auto-Pro Dog Clamps to your peg table or workbench. Auto-Pro Dog Brackets contain Dog holes that accommodate Armor Auto-Pro Dog Clamps. Mount Auto-Pro Dog Brackets to any peg table or work surface to extend the clamping range and capability. Mount accordingly to accommodate horizontal or vertical applications. Ideal for use with Armor s Patented Auto-Pro Horizontal and In-Line Dog Clamps. Add Armor Auto-Pro Dog Brackets, Dog Fences and Dog Clamps to your clamp collection, and you will be amazed how much easier it is to get your work done. Color Anodized Aluminum Extrusion Requires Three (PBB-4) or Seven (PBB-12) #8 Wood Screws to Mount. Contains Two (PBB-4) or Six (PBB-12) 3/4 Dog Holes. Height Length Fits PBB /4 peg hole PBB /4 peg hole 7 x.236 THRU ALL 6 x.750 THRU ALL x.236 THRU ALL x.750 THRU ALL PBB-SSRev1

10 DOG FENCES GREAT FOR AUTO-PRO DOG CLAMPS FITS 3/4 DOG HOLES Armor Auto-Pro Dog Fences easily slide into any Dog hole with a minimum 3 4 diameter and allow you to position and brace materials or set up corners. If you do not have a Dog Peg Table, simply drill a 3/4 hole in any worktable. Dog Fences are reversible with heights of 1 1/4 on tall side, 5/8 on short to accommodate variations in work thickness and length for sanding and routing. Comes with two 3 tall, 3 4 diameter Dogs. Dogs fit into a track under the Dog Fence, and spacing can be easily adjusted. Ideal for use with Armors Auto-Pro Horizontal and In-Line Dog Clamps. Add Armor Auto-Pro Dog Brackets, Dog Fences and Dog Clamps to your clamp collection, and you will be amazed how much easier it is to get your work done. Height Length Fits PF /4 peg hole PF /4 peg hole PF /4 peg hole FENCES-SSRev1 AUTO-PRO 4-, 8- AND 14-INCH DOG FENCES Interchangeable 3 x 20mm Dog Pegs are available to accommodate different-sized peg tables, sold separately. Color Anodized Aluminum Extrusion Fence Features a High and Low Side Fits 3/4 Dog holes Adjustable Dog ARMOR P-20MM-3 PF-4 PF-8 PF-14 ARMOR 4-, 8- AND 14-INCH DOG FENCES

11 DOG PEGS FOR DOG CLAMPS & FENCES USE WITH THE P7-HH DOG CLAMP P-20MM-3 P-20MM-7.5 P AUTO-PRO DOG PEGS ARMOR 3- AND 7.5-INCH DOG PEGS AUTO-PRO 3 20MM DIAMETER DOG PEG (P-20MM-3) For use with the P7-HH for 20mm table holes with short table depths. Also for use with Dog Fences on 20mm tables. AUTO-PRO 3" 3/4" DIAMETER DOG PEG (P ) For use with the P7-HH for table holes with short table depths. AUTO-PRO MM DIAMETER DOG PEG (P-20MM-7.5) For use with the P7-HH for 20mm table holes. Also for use with Dog Fences on 20mm tables. Length Diameter P-20MM mm P P-20MM mm CROSS SECTION (Not to scale) 5/16-18 UNC Threads PEGS-SSRev1