Tel: +44 (0)
|
|
- Walter Blair
- 5 years ago
- Views:
Transcription
1 4 Lindapter s support fixing range offers a series of ideal solutions for all building services. This includes the suspension of HVAC equipment, pipe work, fire protection/sprinkler systems, suspended ceilings and all manner of electrical equipment such as cable tray and ladder. These products have all been designed to give speed and ease of installation to reduce time and keep costs under control. Where necessary support products have been tested, and approved, by the relevant bodies such as those which oversee and insure fire protection installations. For the installation of heavy duty service equipment such as pipe supports used in the petro chemical industry the steelwork fixings in section 1 of this catalogue are more suitable. 54
2 4 High Grade Alloy Steel, bright zinc plated Setscrew Locknut Nut Basket T Swivel Unit W U R 360º Beam flange clamp with swivel unit. For parallel and sloping flanges. Supplied with grade 8.8 setscrew for secure grip. (4:1 Factor of Safety) Torque Product Thread Tensile/ 25º Tensile/> 25º to 45 Clamping Thickness Setscrew Setscrew Nut Dimensions Code W N R T U Width kn kn mm Nm Nm mm mm mm mm mm FLS08 M M FLS10 M M Order example: FLS08 Installation Approved Applications N M S Locate FLS onto flange. 2. Ensuring lug on locknut locates into main body, tighten down setscrew (), and then tighten upper locknut (N). 3. Install threaded rod by screwing into nut located in nut basket (S). Ensure full thread capture. 4. Secure assembly in nut basket (S) from beneath using a locknut (not supplied). General Applications Parallel Flanges only 90 Ensure that the cup point setscrew always grips on the tapered side of the flange
3 4 Malleable iron, bright zinc plated Hexagon Setscrew Square Head Setscrew Rear Hole (Tapped / Clear) Locknut Main Body T N V W U Beam Clamp suitable for use with parallel or tapered flange beams, supplied with the back hole drilled or tapped. The type FL uses a grade 8.8 cup point setscrew for secure grip. Supplied with square or alternatively hexagon head setscrews. Can be used with type SW Swivel Unit (see page 57) when connecting to inclined sections. Torque (4:1 Factor Clamping Set- Set- Lock- Product Code Hole Ø Thread of Safety) Thickness screw screw nut Dimensions Clear Tapped Tensile W N T U Width V mm kn mm Nm Nm mm mm mm mm FL106D FL106T 7 M M FL108D FL108T 9 M M FL210D FL210T 11 M M FL312D FL312T 13 M M FL412D FL410T 13 M M Order example: FL210D with Hex Setscrew FL210D with Square Head Setscrew and SW10 Installation 1. Slide FL onto beam flange and tighten setscrew to recommended torque. Guideline: tighten the setscrew finger tight and then apply a further quarter turn (90 ) with spanner. 2. Tighten the locknut (N) to the recommended torque. On tapered flanges the cup point setscrew has to grip on the inside of the flange. 56
4 4 Malleable iron, bright zinc plated Setscrew Locknut Main Body T N V W U Beam clamp with tapped holes in position and to accept threaded rod or cable clips. For parallel or tapered flanges. Supplied with grade 8.8 cup point setscrew. Installation see page 56 type FL Torque Product Thread (4:1 Factor of Safety) Clamping Thickness Setscrew Setscrew Locknut Dimensions Code Tensile / in Pos. Tensile / in Pos. W N T U Width V kn kn mm Nm Nm mm mm mm LC06 M6 M M LC08 M8 M M Order example: LC06 High Grade Alloy Steel, bright zinc plated Type FL Type 10 U R V Swivel unit for applications on inclined beams. Can be used with type FL or type 10. Supplied complete with grade 8.8 M10 x 90 setscrew and nut. Dimensions Product (4:1 Factor of Safety) Max. With Bolt Code Rod Tensile Inclination Rotation Torque U R Width V kn Nm mm mm mm SW10 M Order example: SW10 57
5 4 Malleable iron, hot dip galvanised Nut Single Leg Bolt Double Leg T V R S W V A two part flange clamp with large clamping range.the bolt can be substituted with either drop rod or J bolts. For parallel flanges only. Product Code Clamping with without Bolt 4.6 (4:1 Factor of Safety) Thickness Dimensions Bolt Bolt Tensile W Torque S T V Width R kn mm Nm mm mm mm mm mm F308NC F308NB M F310NC F310NB M F312NC F312NB M F316NC F316NB M F320NC F320NB M Order example: F308NC Malleable iron, hot dip galvanised T S V 1 W V 2 A two part flange clamp which fixes claw type cable cleats directly beneath the flange. Supplied with grade 4.6 bolt. Clamping Product Bolt 4.6 (4:1 Factor of Safety) Thickness Thread Dimensions Code Tensile W Torque T V 1 V 2 Width S kn mm Nm mm mm mm mm mm F310BICCA M M Order example: F310BICCA 58
6 4 Pre-galvanised strip Hanger Nut A With special nut C B With standard nut The strap hanger carries FM approval for use in fire sprinkler installations. Supplied with or without a hanger nut. Product Code with without Pipe Nuts Hole Ø Dimensions Nut Nut Bore Tapped A B C mm mm mm mm SH025N SH M8 or M SH032N SH M8 or M SH040N SH M8 or M SH050N SH M8 or M SH065N SH M8 or M Product Code with without Pipe Nuts Hole Ø Dimensions Nut Nut Bore Tapped A B C mm mm mm mm SH080N SH M8 or M SH100N SH M8 or M SH125N SH M SH150N SH M SH200N SH M Order example: SH025N with M10 hanger nut Malleable iron, bright zinc plated / hot dip galvanised Hemispherical Washer R W2 W1 L 10 Hemispherical Cup For vertical suspension on angled surface of up to 10 swing either side of the vertical. The hemispherical washer (HW) can be used without the cup. Loads are subject to applications, please contact Lindapter. Dimensions Product Code Hemispherical Washer Hemispherical Cup Hemispherical Washer & Cup Hemispherical Washer Hemispherical Cup W 1 W 2 R L mm mm mm mm mm mm HW HW HW10 HC HW12 HC HW16 HC HW20 HC HW24 HC Order example: HC10 BP 59
7 4 Mild steel - bright zinc plated A purlin clip to suit a large range of purlin sections. Can be used with type SW Swivel Unit (see page 57) for use on inclined purlins. Product (3:1 Factor of Safety) Code Purlins Rod Tensile Torque kn Nm 10 Kingspan M Multibeam 2 & 3 10 Metsec M eta M Order example: with SW10 Pre-galvanised strip Installation The purlin clip HCW30 is suitable for horizontal purlins. Can be used with type SW-Swivel Unit (see page 57) for use on inclined purlins. Installation Product (3:1 Factor of Safety) Code Purlins Rod Tensile Torque kn Nm HCW30 Kingspan M Multibeam 3 Order example: HCW
8 4 Pre-galvanised strip A universal purlin clip suitable for multiple different applications. Product (3:1 Factor of Safety) Code Purlin Tensile kn HCW31 Kingspan Multibeam Order example: HCW31 Mild Steel, bright zinc plated The Webfix WF for a quick installation directly from the web of ed purlins. Max. Distance Product (5:1 Factor of Safety) Max. Hole at Angle of Code Rod Tensile Purlin Thickness Ø 10º 20º 30º kn mm mm mm mm mm WF10 M Order example: WF10 Installation Squeeze legs of WF together and push through hole until it snaps into place Assemble with nut and ensure full thread capture. Hole position for angled purlins Canted Purlins: As the angle of backwards cant increases, the maximum allowable distance (hole centre to bottom edge of purlin) must 1. decrease. 2. Inclined Purlin: The WF adjusts to whatever angle is required. Hole position is not a limiting factor on product installation. 61
9 4 Pre-galvanised strip A one-piece wrap around purlin hanger. The HCW34 can be used to suspend from canted purlins at up to 15 from the vertical. H Purlin Kingspan Multibeam 3 (3:1 Factor of Safety) Product Code Purlin Height Total Height H Rod Tensile mm mm kn HCW34/ M HCW34/ M HCW34/ M HCW34/ M HCW34/ M Order example: HCW34/145 Multichannel Lipped C Section Swagebeam Multibeam ed Section SFS C Section UltraBEAM eta Section Ultrazed Section 62
10 4 Type F3 Type WF Type FLS Type HCW31 Type HCW30 Type 10 Type SH Type SH 4 63
Available from. Established Technical Innovation in Steelwork Connections
Established 1934 Technical Innovation in Steelwork Connections 2 Introduction to Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer in the design and manufacture
More informationComposite Decking Fixings 3
Composite Decking Fixings 3 Composite Decking Fixings Lindapter composite decking fixings have all been designed in conjunction with the various decking manufacturers to ensure they fulfil the necessary
More informationTechnical Innovation in Steelwork Connections
Established 1934 Technical Innovation in Steelwork Connections 2 Introduction to Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer of designing and manufacturing
More informationTechnical Innovation in Steelwork Connections
Technical Innovation in Steelwork Connections Established 1934 Lindapter - Technical Innovation in Steelwork Connections 2 For more than 75 years, Lindapter has earned a respected reputation as the inventor
More informationCopper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationSTEEL C-CLAMP WITH LOCKNUT
FIG. 250 STEEL C-CLAMP WITH LOCKNUT Function: Designed for attaching hanger rod to the bottom flange of a beam. The hanger rod should make contact with the beam flange to ensure full engagement. Material:
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationHPH Series J-Hook Installation Instructions
HPH Series J- Installation Instructions 1 Mounting to a vertical surface: HPH16, HPH32, HPH48 and HPH64 Use a nail*, bolt* or screw* with a minimum head diameter of 0.329 (1-A) and an appropriate length
More informationSwifts cable ladder supports
heavy duty cantilever arms Heavy duty cantilever arms enable horizontal runs of cable ladder to be mounted to vertical steel, concrete or masonry surfaces or to Swiftrack channel. They are suitable for
More informationCone. Bolt. Rubber Washer. Rubber Washer. compressed / increased clamping force
Type HB - Hollo-Bolt Cavity Fixings 2 Type HB - Hollo-Bolt Steel, bright zinc plated plus JS 500 Steel, hot dip galvanised Stainless Steel Grade 316 Collar Sleeve Cone Bolt Suitable for hollow sections,
More informationSWAY BRACE PIPE ATTACHMENT FIG. 010
Function: Designed for bracing pipe against sway and seismic disturbance. The pipe attachment component of a sway brace system used in conjunction with a PHD Manufacturing structural attachment fitting,
More informationProducts for fixing to Steelwork and Decking
Products 8.0 Beam Clamp - Single Support 8.1 Universal Joint for any variable Angle Adjustment 8.2 Beam Clamp TCS for Header Rails 8.3 Beam Clip for Cross Support/ Dimensioning of Bolts 8.4 Beam Clip for
More informationMPA-9000 Universal Ceiling Projector Mount Kit
I N S T R U C T I O N M A N U A L Universal Ceiling Projector Mount Kit The Universal Ceiling Projector Mount provides a unique, simplified method of ceiling mounting your inverted projector. This low
More informationHollo-Bolt. High Clamping Force (HCF) M8 M10 M12 M16 M20 JS500 Stainless Steel Sheraplex Hot Dip Galv.
Type HB - Hollo- Type HB - Hollo- Steel, bright zinc plated plus JS5 Steel, sheraplex Steel, hot dip galvanised (Hex Head only) Stainless Steel Grade 316 Hollo- Suitable for hollow sections, tubes and
More informationXL MAX. Suspension System Data Center Ceiling Solutions. Assembly and Installation Instructions
PRELUDE Top Lock XL MAX (4) #8 x 1/" Long Main Beam Sharp Point Truss Head Screws Suspension System Data Center Ceiling Solutions Assembly and Installation Instructions SYSTEM OVERVIEW The Prelude XL Max
More information5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationBEST PRACTICE GUIDE. Socket Bases. Working with Concrete Slabs
Working with Concrete Slabs When working with concrete slabs the barrier protection can be erected in three ways - with socket bases, adjustable slab edge brackets and multi slab clamps. Socket Bases 1
More informationCONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
More informationSimotec. 13.i
Products: Framo 80 13.0 Products: Framo 80 13.1 Products: Structural Elements 100/120 13.2 Products: Pipe Shoes 13.3 Framo 80: Beam Section and Screw 13.4 Framo 80: Cantilever Bracket and End Support STA
More informationSTANDARD GRAVITY BOX TARP INSTALLATION
OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com
More informationMax. Rec. Load. Wt. Per Inch lbs. kn lbs. kn lbs. kg. Wt. Per Inch lbs. kn lbs. kn lbs. kg 750 F (399 C)
FIG. 10 FIG. 15 & 15L Function: Designed for use in pipe hanger assemblies. (Type 304 or 316 Stainless Steel upon request) Ordering: Specify figure number, rod size, length (), material, and finish. 650
More informationIndex Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
More informationNotes. Modifications and constructional corrections arising particularly from technological development excepted.
Notes Our service staff and application en gineers will be pleased to offer you their assistance to answer your questions or to work out in cooperation with you specific solutions with the aid of our own
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More information7x --Tailstock Cam Lock
7x --Tailstock Cam Lock By Magic Brian magicbrian40@yahoo.com Probably the most pleasing mod to have, but often not done through lack of milling facility s This version does NOT require a mill. MATERIALS
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationINSTALLATION INSTRUCTIONS TRI-ROOF. energy for a better world
energy for a better world INSTALLATION INSTRUCTIONS TRI-ROOF The flexible roof integration system Compatible for framed module types* Simple exchange of modules Replaces existing roofing Special profiles
More informationSECTION 7 CHANNEL & SUPPORT SYSTEMS
SECTION 7 CHANNEL & SUPPORT SYSTEMS Unitrunk Intelok Channel is a strong, easy to erect support system, ideal for supporting cable trays, cable ladders, pipes and ducting and is adaptable for use in many
More informationTABLE OF CONTENTS. Impregnated... 1 NORDIC FENCE Fynbo FSC Certified... 1
TABLE OF CONTENTS Impregnated... NORDIC FENCE Fynbo FSC Certified... Iron... NORDIC FENCE Lightweight model, GENERAL... NORDIC FENCE Lightweight model, with a grid filled... NORDIC FENCE Lightweight model,
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationINSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets
TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part
More informationH HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationSteel Floor Connections
Steel Floor Connections Pioneering high strength steel connections since 1934 2 Steel Floor Connections by Lindapter Welcome For over 80 years Lindapter has earned a respected reputation as the pioneer
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationTransmission Line Support Systems
Antenna Support Bracket for transmission line The Antenna Support Bracket angle mounts directly to a 4-1/2" (114 mm) OD antenna pipe mount or tower leg. This is ideal for supporting transmission line runs
More informationDobyGrip Accessories. Wire with Loop. Wire with Closed M6 & *M8 Eye Bolt. Wire with Carabina
Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional methods of suspension. All wires are supplied including the DobyGrip
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationCable trays Assembling instruction
Cable trays serve the bridging of medium-size fitting distances. The support structures must be planned by engineering experts and observing the permissible torque of all screw connections. 1 Floor connector
More informationPrecision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM
Precision Engineering & Reliability WIRE ROPE SUSPENSION SYSTEM DobyGrip Wire with Loop Quick and easy fixing to purlins, beams etc by forming a choke knot. Reduces the installation time compared to conventional
More informationEasy Step by Step Manual
Easy Step by Step Manual Teletower Mini XL Wall-Floor installation The tower packages #1-#2-#3 Open Base Package #1 for the main tower parts. Here you see the three tower tubes (H-Head, M-Middle, F-Feed)
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationsouthpaw enterprises, inc.
Eye Bolt Wrap 7001 Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. this in an accessible location: the must be read and familiar
More informationSTEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION
B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions
More informationCABLE TRAYS & STRUTS CATALOUGE
CABLE TRAYS & STRUTS CATALOUGE We are the Manufacturer for Copper Bonded Ground Rod and Contract Manufacturing Company for other products made from Brass, Copper, Gunmetal, Bronze, Cast Iron, Malleable
More informationNo. 412, 414, 416 Operations Manual
No. 412, 414, 416 Operations Manual CARE: Occasional oiling of moving parts with machine oil will ease operation and extend the life of the brake. Occasionally check and tighten the lower beam bracket
More informationElco Construction Products 1301 Kerr Drive Decorah, IA fax:
Technical Manual 2010 HangerMate anchors were designed to speed installation of fire sprinkler, HVAC, refrigeration, general piping, and electrical systems. They can also be used to install strut channels,
More informationINSIDE PANEL NOT SHOWN TO DETAIL ANCHORING SYSTEM
SIX INCH ALPHA MODULE INSTALLATION KEWAUNEE SCIENTIFIC CORPORATION SIX INCH ALPHA MODULE ANCHORING SYSTEM After Alpha module has been set in desired location. Adjust the four adjustment bolts until the
More informationset of safety brace steel cable draw-up gate kpl
0324101 7108020 8208100 Order-nr. Description Number 0324101 safety brace steel cable draw-up gate 2 7108020 hexagon-head tap bolt M8x20 galv. 2 8208100 hexagon nut M8 galv. 2 set of safety brace steel
More informationInstallation Instructions
by Plato Woodwork Installation Instructions Plato Woodwork, Inc. 200 Third Street SW P.O. Box 98 Plato, MN 55370 www.platowoodwork.com 800.328.5924 SECTION GUIDE GETTING STARTED PAGE # Installation Methods...
More informationWide-span cable trays WPR Assembly instruction
Wide-span cable trays are for bridging large fastening gaps. The fastening constructions must be planned by engineer and the use of side rail bearers on the brackets must be strictly kept. The permissible
More informationMANUAL MOUNTING SYSTEM FOR CORRUGATED ROOF
MANUAL MOUNTING SYSTEM FOR CORRUGATED ROOF EN mounting system for corrugated roof for solar panels in portait setup (cross-system) ESDEC BV 2015 TABLE OF CONTENT 1. Introduction 1 2. General installation
More informationSupport systems Assembling instruction
Support systems Support systems Light-duty Installation instruction for support systems of wire-mesh cable trays and cable trays attached directly to concrete. 1 Wall mounting with bracket KWLL To install
More informationSolarMount (E)volution
SolarMount (E)volution SOLARMOUNT (E)VOLUTION: THE BEST JUST GOT BETTER. Engineering, Excellence, and Ease. Performance Engineered for versatility and reduced installation time, SolarMount (E)volution
More informationIIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
More informationInstallation Systems INSTALLATION SYSTEMS
INSTALLATION SYSTEMS 230 MM Channel System MM Channel System Page 230-237 MQ Channel System MQ Channel System Page 237-248 MC Channel System MC Channel System Page 249 Accessories Beam Clamp MAB Page 249
More informationInstallation Manual ZGuard Mounting Options
Installation Manual ZGuard Mounting Options Above-Counter Heavy-Duty Flange (EZ-Span) (Entire EZ-Span unit not shown) Lift EZ-Span unit up until bottom of 1.5" diameter post clears internal heavy duty
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationTechnical Innovation in Steel Connections
Technical Innovation in Steel Connections USA & Canada Catalog Established 1934 Lindapter - Technical Innovation in Steel Connections 2 inquiries@lindapterusa.com www.lindapterusa.com For more than 75
More informationHANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT
HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the
More informationP2784 3" (76.2) (31.8) 25 to 45 PFL2-37
P289 (2.0) (.) 2 (.2) 2 (2.4) 2 (.2) hreaded esign (Safety Factor of 4) (angles 2 ) - 0 Lbs (2.4 kn) ) - 0 Lbs (.4 kn) Safety Factor 4 orque: Ft-Lbs (8 N m) PFL2- to (.2 to 9.) 2 2 2 2 to 4 t/00 : Lbs
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationREC Series Rack Installation Guide
REC Series Rack Installation Guide 1 REC Series Rack Installation Guide TABLE OF CONTENTS SECTION SAFETY WARNINGS 1 600 WIDE EXPLODED VIEW 2 800 WIDE EXPLODED VIEW 3 SWITCHING DOOR HANDING 4 STABILIZING
More informationRoof Mount Ground Mount Specialised Clamps Spares Application Notes
DPA Solar Racking Solutions Solar PV Racking Catalogue Roof Mount Ground Mount Specialised Clamps Spares Application Notes www.dpasolar.com.au 1300 447 500 Rails & Splices Page 3 Mid & End Clamps Page
More informationT-Slot Clamps Rotagrip Ltd Tel Website
T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More informationPage 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications
R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with
More informationSINCE 1922 P UBLICATION N O
SINCE 1922 GARED SPORTS MICRO-Z SET-UP INSTRUCTIONS VERY IMPORTANT! READ INSTRUCTIONS CAREFULLY AND FOLLOW STEP BY STEP SET-UP PROCEDURE P UBLICATION N O. 5 5 1 7 5 2 9 1 6 Recommended tools and accessories.
More informationmila-wall (Series100) General Operating Instructions page 1 of 15
mila-wall (Series100) General Operating Instructions page 1 of 15 Step #1: Before setting up walls, lower adjustable leveling feet on each panel approximately 1". This will allow access to the threaded
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationINSTALLATION LOW HEADROOM EXTENSION. 1 Cutting Vertical Track. 2 Quick Install Jamb Brackets
LOW HEADROOM EXTENSION P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2016 Wayne Dalton, a division of Part No. 333897 REV3 5/03/2016 This supplemental installation instruction is to be
More informationTitan Series Awning Assembly and Installation Instructions
Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationOXYGEN INSTALLATION. Revision date
12345 1 Hardware List 12345 Flat head wood screw #9 x 7/8 long with #2 Phillips drive, silver Used to attach surfaces and end panels Hex set screw ½-13 x 2 long with 1/4 hex drive, black Used on Legs Hex
More informationRBP-1215B-RX DODGE RAM QUAD CAB RX3
RBP-1215B-RX3 2002-2017 DODGE RAM 15-3500 QUAD CAB RX3 Passenger side RX-3 Side Step Drill Template Passenger side rear Modular Bracket (6) L Support Brackets Driver side rear Modular Bracket Driver side
More informationSYW Industry Sdn. Bhd. Stud Anchor. Hexagon Nut / Flange Nut. U - Bolt (c/w 2 Nuts) Steel Band. 1 of 8
SYW Industry Sdn. Bhd. Stud Anchor Hexagon Nut / Flange Nut U - Bolt (c/w 2 Nuts) Steel Band 1 of 8 BT Anchor (MM size) Expansion Anchor 2 of 8 Set Anchor Sleeve Anchor with Flange Nut 3 of 8 BT Anchor
More informationTITAN2-EDGE Public Access Computer Station Dual Track
TITAN2-EDGE Public Access Computer Station Dual Track TITAN2-EDGE Rev A 6/17 Model TITAN2-EDGE ASSEMBLY AND ADJUSTMENT TITAN2-EDGE PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the
More informationFeatures of TOOLFAST Clamping Devices and Clamping Elements
PART I CLAMPING DEVICES & CLAMPING ELEMENTS INTRODUCTION In the following pages of this part of catalogue, different types & sizes of clamping devices and clamping elements manufactured by us are illustrated.
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationDBP Technical Data Series Rev. 0 Jan. 1, Pre Assembled Door Canopies
Technical Data Series Revised: 1 January, 2011 Article IX. SECTION 9.01 PERSONAL DOOR CANOPIES...3 SECTION 9.02 ERECTION INSTRUCTIONS...4 SECTION 9.03 ERECTION ILLUSTRATIONS...7 SECTION 9.04 MULL INSTRUCTIONS
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationMOR/ryde Steer Axle Suspension System
MOR/ryde Steer Axle Suspension System (Double Eye Leaf Spring) Steer Axle Installation Instructions MOR/ryde International 1966 Moyer Avenue Elkhart, IN 46516 574-293-1581 www.morryde.com SRL153-001 REV.
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More informationCEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual
CEILING-MOUNTED MONORAIL ANCHOR TRACK SYSTEM Assembly and Operation Instruction Manual This manual is for various mounting types and plain and trussed track profiles. ISO 9001:2008 Registered Manual 103-0075
More informationTrack Rack. * Track Racks are not lockable
The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationAssembly Instructions for model: VMPR1
Assembly Instructions for model: VMPR1 Congratulations on your purchase! The VMPR1 ceiling mount provides a unique, simplified method of ceiling mounting inverted LCD/DLP projectors. Its low profile design
More informationGared Pro-S Portable Backstop
Models: 9616 & 9618 Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE PUBLICATION
More informationCSS Central Mount System
CSS-20 Installation Manual CSS-20 Safety Notifications Below are the installation instructions for the CSS-20-2 Long Span Beam Mounting System. Please read these safety notifications prior to beginning
More informationCHICKEN COOP & CHICKEN RUN. Tools required for assembly (not included)
CHICKEN COOP & CHICKEN RUN ASSEMBLY MANUAL SKU# 6839 Tools required for assembly (not included) Distributed by: TRACTOR SUPPLY COMPANY 0 VIRGINIA WAY, BRENTWOOD, TN 3707 For customer support, call: -888-376-960
More informationB3199R - Ceiling Flange B3199RCT - Ceiling Flange Dura-Copper Coated. TOLCO Fig All Steel Ceiling Plate. 216 Eaton
ttachments 3199R - eiling Flange 3199RT - eiling Flange ura-opper oated Size Range: 3 /8"-16 & 1 /2"-13 rod Material: Malleable Iron (Stainless Steel Type 304 available) Standard 3199RT is UR-OPPER coated
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationINSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DOOR SYSTEM (180º INSTALLATION)
INSTALLATION INSTRUCTIONS VENETIAN 84" SLIDING SHOWER DO SYSTEM (180º INSTALLATION) 28539 Industry Drive, Valencia, CA 91355 Toll Free Phone: (877) 728-3874 Toll Free Fax: (888) 440-9567 Phone: (661) 775-1675
More informationInterior Equipment/Shop Fittings
Interior Equipment/ Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Hook-in profile Eilox SHOPTEC Shopfitting system Wall channel Bracket Column Accessories
More information