VISES, BASES, PALLETS & TOMBSTONES AXIS WORKHOLDING]

Transcription

1 [ 5,, PLL & OMON OROLN]

2 MaxLock P40, P440, & P460 ises vailable with errated, ovetail (), or arvable [] jaws. errated and ovetail jaws have different clamping areas, at the bed, in the middle of the jaw and at the top of the jaw. ee table below. ombats lift with new urt lift control system. ± repeatability. 80,000 psi uctile iron body for rigidity and vibration damping. ardened ways. 440 heat treated steel jaws. /4 screw diameter for strength. eavy duty bolt down with /" cap screws. crew internally hexed for a smaller footprint. enter line on vise easily adjusts to the center of the table rotation. hree sizes available: 5", 7", and 9" Long. stimated hip eight: 0 Lbs. (P40) Patents pending. lamping orce Range oot Pounds Pounds of orce ,00 0,900 40,500 MaxLock P Optional Risers P40-RR P440-RR P460-RR P OLL R P

3 /8 ex /8 ex /8 ex /8 ex Riser ase Riser ase ection ection - cale : op iew Riser ottom iew L ection cale : ØL R ØL R Model arvable aw rea P N P40 L P440 cale : P460 cale : P460 P440 P460 ovetail arvable errated ovetail arvable errated ovetail arvable / / / / / / / / / / / / / / / / / / nt ex L ex /8 0. M N /8 ex 0. /- /- /- /- /- /- /- /- /- R ore for/4-0 / () /4-0 /4-0 P440 ØM P40 0 /.94 ØM ØN P / /.9 P M ØN ection - ection - ottom iew/ise ection - cale : Riser base aw ype errated arve Line Ø ection - cale : ore for / () Ø Riser ase N M ection nd iew arve Line P /4-0 /4-0 /4-0 /4-0 /4-0 / P OLL R P

4 ovelock ovetail 5 xis ise ovelock dovetail vise for 4 and 5 axis N machining with access to five sides of the workpiece. Manufactured from pre-hardened 440 steel, the ovelock maintains part rigidity and minimizes deflection or clamp creep when under high machining pressure. Reversible models allow for a wide range of dovetail widths. igh clamping screw location reduces deflection. Movable jaw slide is retained within the stationary jaw and creates more anti-deflection control. mbedded locating pin keeps part location accurate when applying side load pressure. Models available: tandard model 0. Reversible jaw models R0 and R0. Mounting base has pre-configured hole pattern to fit most machines. asy part prep requires only /8" of material to hold workpiece in place. Movable and stationary jaws are matched pairs. Lifetime ron lad arranty. R0 R0 0 Ø Ø Ø op iew Ø 0.70 Ø ottom iew Ø M /- /4-0 / (opening) (opening) L / /8-6 ØM (slip fit dowel) st hip eight Lbs.5 Lbs 8 Lbs nd iew (opening) (opening) lamp orce 0 R0 nch Pounds Pounds of orce 80,000 60,000 40, ,000 L 0- Riser ase Riser eight.50" Riser iameter 4.47" eight 5 Lbs. ovetail utter Model: 0- Optional Riser ase for 0 vise only Model: 0- dditional pallet options availablecontact factory for details P OLL R P

5 MaxLock 5 xis ise elf-centering vise for five axis machining. ±0.000" repeatability. djustable enter Line. Machinable aws choice of aluminum or steel. he customer will machine in a step for higher accuracy eliminating the need for parallels. olds up to a 6-/" long parts with model M45. lamp both O and. urt nglock design pulls the part down. -/" & 4" jaw widths. all jaws for increased spindle clearance. aws are reversible. lexible mounting options. ex keys required for jaw removal: : 5/64", /" M45: /", /8" hown with optional riser base Optional riser bases: -RR M45-RR Optional mounting pallets contact factory for options imensional ata M45 M45L L /8 5/ L M N P Ø Ø Z st hip eight 0 Lbs 0 Lbs lamping orce Lbs. t. Lbs op iew Lbs orce ,00 40,800 ex M45 lamping orce Lbs. t. Lbs Lbs orce ,000 0,500 40,000 50,500 60,000 P OLL R P ront iew ottom iew aw its (ncludes wo aws) Part Number Length idth eight eight L- luminum aw it M45L- luminum aw it teel aw it M45- teel aw it L M N Min to P Max ored for L (4) (4) Z Ø P Riser Not hown in his iew atching enotes arvable rea 4 4

6 MaxLock Multi-xis nglock ise crew election hart Part Number crew Length Minimum aw Opening Maximum aw Opening *M M M M *omes standard with M screw urt nglock esign pulls the part down. Pull ype feature decreases stationary deflection. 0.65" stroke llows for wider range of clamping before having to change setup. Modular esign Mounts on two inch grid patterns when removed from the riser and slots or center hole grids 00 mm and under. hen mounted in a two inch grid the vise comes with locator bolts for quick alignment. hen mounted on the risers, precision 5/8 holes have been added so urt sine keys can be used for quick alignment. uxiliary clamping slots allows the customer more flexibility in mounting the vise. he customer will finish machine the horizontal surface of the jaw plate for higher accuracy, eliminating the need for parallels. Machinable semi-hard steel jaws available in lengths. he screw is easily manufactured and changed, by the customer, to allow a broad range of part sizes. Maximum of 40 t. Lbs. provides up to 7,000 Lbs. clamping force. hip eight: Lbs. Patente Removable ap ee crew hart 5/6-8 N hread () 5/8- hread -ore for / d ().65 d ().65 ) ) ) ) nd iews /6 5/8- hread M50-6 awplate Removable ap aw Plate imensions learance Required to 5 nsert olt nder P Rail OLL R P op iew -ore for / ottom iew / /6 ee crew 5/6-8 R.8 Removable R aw Plate hart imensions learance N hread Required () to ap nsert olt nder Rail. R.500 R.500 Optional Risers Part No 4.65 M50RL and M50R R R ottom iew nd iew.750 Ø0.65(4).000 Ø0.5 (4) 9/ Ø0.65(4).750 Ø Machinable aw emi-ard teel Ø0.65 hru hru ll ll 0.50 Ø0.90 Ø oth oth ides ides Part Number Ø0.65(4) M Ø0.500 () M Ø0.5 Ø (4) ().750 M Ø0.5 () Ø0.65(4) Ø0.500 () Part Number M50R M50RL Options: M50-6 ouble tep awplate M50-6- ouble tep awplate w/n oating R.8 R /6

7 chenke lamping ystem igh clamping force (up to 40 kn) exactly where it is needed, by incorporating the tension spindle directly below the work piece support. orm fit clamping with embossing pins. No pre-embossing required. No flare out of the jaws under tension, no distortion on machine table. xtreme rigidity permits maximum cutting forces. he special design and a clamping depth of just 8 mm permits obstruction free machining on 5 sides. ny desired clamping width, limited only by the size of the machine table. he two clamping jaws, one fixed and one moving, can be positioned at any desired distance from each other. lamps blank work pieces, machined work pieces, round and irregularly formed work pieces. 500 clamping system can be mounted on -slot or location grid machine tables or any custom fixture. echnical ata L lamping eight above machine table () 75 mm* (6.889") 00 mm* (.97") xtended height +5 mm see pos.9 (Parts No ) xtended height +50 mm see pos.9 (Parts No ) 00 mm (7.874") 5 mm (4.9") 5 mm (8.858") 50 mm (5.906") aw width 00 mm (.97") 00 mm (.97") lamping force on work piece lamping width with standard set 5-40 kn (4-899 Lbs) 0-6 mm (0.787" 9.9") 5-40 kn (4-899 Lbs) 0-6 mm (0.787" 9.9") lamping depth 8 mm (0.5") 8 mm (0.5") h 6 mm (.47") 6 mm (.47") l see parts list see parts list b 98 mm (.858") 98 mm (.858") * he clamping height of the 00 mm or 75 mm respectively can be raised by using the mounting block raise mm raise mm raise he clamping force is generated right where it is needed opens under working strain parallel clamping lamping force lamping force no flare out under tension onventional P OLL R P

8 Mini oollox 5.00 quare.70 esigned to fit a wide range of machine tables. asily handles a variety of R 5 axis vises and MiniLock systems. Machined from solid aluminum. eighs only lbs. and easily handle by today's N machines. Ø.7 (95m 0.9 P P 9.84 (50mm)9.84 (50mm) M lange Nut Ø.8 (0mm) ee etail ee etail Ø.740 (95mm) 0.9 P P Ø.740 (95mm) Ø (70mm) 0.6 (70mm) 0.9 P Machine ablemachine able or Platter or Platter P Ø0.5 Ø.8 (0mm) etail M lange Nut op iew 5.00 quare 5.00 quare Ø esigned to cover a wide range of vises and a wide range of tables. he mounting slots are designed to be covered up when a vise is mounted to keep clear of chips. n easier way to mount urt 5 axis vises to a machine table. P8 5 xis dapter Plates 0 Model Locating pud Ø Locating pud Mounting olts P8-77- / L... / L... 0 R P8-77- P P8-77- /-.875 L P8-77- /8-6.5 L L... M P8-77- /-.50 L L... tem No. Part Number R0 0 ty escription 8 nch Round ase Plate P8-44 (5 xis 8.0 ase Plate) P8-5 (5 xis 8.0 ase Plate over) ase Plate over /4-0 / L R0 0 P40 ottom iew P40 R P40 0 R0 xample etups M P40 R0 R0 P40 M45 P40 R0 M urt Manufacturing ndustrial Products ivision P River Road N, Minneapolis, MN Phone oll ree Phone & anada ax oll ree ax Only workholding@kurt.com M45 M M