Technical Data gripos ISO 9001

Size: px
Start display at page:

Download "Technical Data gripos ISO 9001"

Transcription

1 Technical ata gripos M-CERTIFICATE ISO 9001 NV N O NC-uick Action Vices gripos The NC-uick action vices gripos were developed to provide the solution to practically every clamping problem in manufacture and automation. Versatility and flexibility in day to day applications are the particular features. Thanks to the modular system and compatible constructional parts and accessories, the gripos are easily and quickly expanded and converted. 1. Rapid clamping Via clamping lever with small angle of rotation (max. 160 ). Crank handle and bevel drive are dispensed with. Hence locatable anywhere, even in the middle of the machine work-table. 2. Fully encased force amplification cassette Hermetically protected against coolant and dirt. With mechanical locking for secure work clamping. Maintains clamping pressure even under vibration. 3. Removal of spindle assembly unit Within seconds, for minimum setting up times and easy cleaning. Simple conversion for alternative operating systems or increased jaw opening. 4. Positioning and set-up irectly via base plate with location bolt. Multiple set-up without gaps possible. Slots for clamps provided. Set-up position horizontal, vertical or on the side, depending on application. 5. Pre-selection of clamping pressure By hand, without tools. Wide infinitely variable range from 10 to 100% of the max. clamping pressure of 40 kn. gripos in synopsis Basic body of GGG 60 Work support surfaces and guides inductive-hardened HRC 54-58, height parallel ground 0/-0.02 True square all round Set-up horizontal Set-up vertical / on one side owel holes and transverse 1 and longitudinal 1 slots for positioning true to reference total surface protection with «black inox» 1 Clamping mechanism Rapid action lever clamping, 160 rotation Patented mechanical force amplification by traction. Fully encased system Covered spindle assembly Alternative operating systems hydraulic, for jaw width 125 mm pneumo-mechanical, for jaw widths 100, 125 mm 6. Clamping pressure by traction No bending of the basic body; no warping of machine work-table and guides. Hence exceptionally high precision. 1 As option for gripos Standard and special jaws Comprehensive range available.

2 Types synopsis Type escription Jaw Clamping Weight Scope of supply Order No. width force [kg] [kn] gripos 80 NC-uick action vice smooth jaws, GPS Standard execution 1 handle, 2 dowel bolts M12 gripos 100 NC-uick action vice ,5 2 reversible standard jaws, GPS gripos 125 Standard execution handle, GPS clamps gripos 100-VS NC-uick action vice ,5 2 reversible combi jaws, GPS gripos 125-VS with encreased jaw handle, GPS opening 4 clamps gripos 125-H NC-uick action vice reversible standard jaws, GPH hydraulic 4 clamps, hydraulic connection gripos 100-P NC-uick action vice reversible standard jaws, GPP gripos 125-P pneumatic clamps GPP gripos 100-2V Vertical unit of Jaws, covers, GPS gripos 125-2V 2 NC-uick action vices handle, GPS bolted directly 2 crane eye-bolts togheter and fixed on a head-plate gripos 100-4V Vertical unit of Jaws, covers, GPS gripos 125-4V 4 NC-uick action vices handle, GPS bolted directly over a 1 crane eye-bolt connecting bloc and fixed on a head-plate imensional sketches gripos 100-/125-P 20-H7 20-H7 gripos 125-H gripos 100-/125-P Types imensions A B B 1 C 1 E F G H I J K L M S gripos ,5 gripos 100 (-VS) ,5 gripos 125 (-VS) gripos 125-H gripos 100-P ,5 gripos 125-P

3 imensional sketches Ø 32-H6 Types imensions A B E F G H gripos 100-2V gripos 125-2V Ø 32-H6 Types imensions A B E F G H gripos 100-4V gripos 125-4V

4 Accessories Type imensions Jaw width Order No. A B C E Spacer GPA jaws GPA GPA rawbar extension GPA GPA GPA Wide jaw opening Two individual vices are united with a drawbar extension to form a single block Rapid conversion thanks to modular construction Clamping pressure by traction - no primary forces on machine work-table and grid plate Infinitely variable jaw openings in combination with grid plates 4

5 Accessories Type escription imensions Jaw width Order No uick-action grip with detachable GPA for jaw opening ball grip ajustment Material stop MSA Work supports 16 10,5 GPA hardened and ground, 25,5 10,5 GPA with swivel-click fixture. 29,5 10,5 GPA (Set of 2 pces) 11 10,5 GPA ,5 GPA ,5 GPA ,5 GPA ,5 GPA ,5 10,5 GPA ,5 GPA Set with 7 pairs of work supports GPA for jaw width 125 mm, in wooden box Jaw assortment Type Application imensions Jaw width Order No. 1 Z Standard jaw fixed 29 65,5 GPA moving GPA Reversible fixed NCA standard jaw NCA moving NCA NCA Z 1 Z Reversible fixed ,5 NCA combi jaw ,5 NCA moving ,5 NCA ,5 NCA Leaf spring press- fixed 25,5 91,5 GPA down jaws moving 25,5 87 GPA for small workpieces Soft jaws fixed GPA GPA GPA moving 29 76,5 GPA GPA GPA

6 Jaw assortment Type Application imensions Jaw width Order No. 1 Z ,5 1 2,5 Step-jaw fixed 24 69,5 GPA profiled moving 24 65,5 GPA Z 1 Z Step-jaw fixed 13,5 65,5 30 GPA encreased moving 13, GPA jaw opening Prism-jaw fixed ,5 GPA High basic jaw fixed GPA Material: moving GPA modular cast iron Compensating jaw moving GPA with mechanical GPA length compensation For clamping shouldered workpieces For clamping 2 workpieces Pivot jaw moving GPA with slot and GPA threads M8 ground clamping surface Intermediary jaw combi GPZ with two leaf springs, 2 threads M8 and swivel-click fixture. Leaf-spring ,5 MSA press-down jaws MSA Press-down jaws ,5 MSA for small ,5 MSA workpieces Precision MSA press-down jaws 40 31,5 6 MSA

7 Jaw assortment Type imensions Jaw width Order No. Z Precision MSA step-jaws MSA Prism-jaws MSA horizontal MSA and vertical Smooth jaws MSA MSA Soft jaws MSA MSA Standard jaws MHA profiled MHA Base jaw with fixture springs MSA For accommodating the quick-change jaws MSA With integral dirt wiper. Profiled quick-change jaw MSA Profiled clamping surface, integral MSA dirt channel. Smooth quick-change jaw MSA Smooth clamping surface, integral MSA dirt channel, two M8 threads for accommodating jaws of the jaw assortment or special jaws. Positioning and fixture Type escription Jaw width Order No Fixture bolts for T-slot 12 mm GPA for clamps. 14 mm GPA Set of 4 pces 16 mm GPA mm GPA Precision T-nuts for T-slot 12 mm MAA with screws. 14 mm MAA Set of 2 pces 16 mm MAA mm MAA owel bolts Ø 12/ M12 GPA Set of 2 pces Ø 16/ M16 GPA

8 GRESSEL supplies programme Senso-power vices grefors The senso-power vice. Unique and patented. Mechanical clamping with feeling. Thanks to infinitely variable fine adjustment, such as was only attainable pneumatically or hydraulically. Independent of energy supply, exact, quick. A single crank revolution is enough to attain the pre-defined clamping pressure. NC-uick action vices gripos The sprinter among the NC-uick action vices. For solving practically every clamping task in manufacture and automation. A complete system with many accessories and clever systematics. With world-wide unique quick-lever clamping. A single swing manipulation through an angle of max. 160 is sufficient for the pre-defined clamping pressure to take effect. Hence positioning in the middle of the work-table possible without bevel drive. ual vice/ Centric vice duogrip/ cengrip A genuine multitalent. For peak flexibility and efficiency in manufacture and automation. Clamps two like or unlike workpieces simultaneously. Just a few manipulations transform it from a dual vice into a single vice for small or large workpieces. Also easily converted for bilateral clamping if required. Zero-point vice element system zeropos uicker and more precise clamping by the zero-point system. Permits multifold more clamping points than hitherto on one pallet. Reduces downtimes, improves the utilization efficiency of the machine. Saves time-consuming measuring and remeasuring, thanks to clamping with fixed zero point. rilling machine vices ecopos The universal geniuses in the metal working trade. Flexible, agile, and designed for peak working safety. A system for the clamping and positioning of workpieces on drilling machines, drilling centers and light milling machines. With unique accident protection in spite of increased speed. Bench vices AX/PS The classic bench vice for workshop and factory. Long established, robust, non-wearing. In various sizes, drive variants and with many accessories. Profile bender HB Indispensable for installation and plumbing, in the metal working trade, and in production plants and prototype workshops. For true-to-size bending up to 180. For rectangular and round profiles up to 24 mm dia.. Nickel plated turn-table and encased needle or ball bearings for long life. Accessories for small radii, reduced section heights, extreme bends, and rational quick clamping for series jobs. Manufacturer: GRESSEL AG, CH-8355 Aadorf, Phone +41(0) , Fax +41(0) , info@gressel.ch, istributor/ ealer: tba e GRESSEL AG. We reserve the right to change design without prior notice. 8

5-axis clamping system compact

5-axis clamping system compact 5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed

More information

Modular clamping and positioning system for milling machines and machine tool. flexible

Modular clamping and positioning system for milling machines and machine tool. flexible Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features

More information

Precision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please

Precision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face

More information

Machine vices RB and RH

Machine vices RB and RH Overview Machine vices RB and RH For high clamping accuracy Special technical features of the RÖHM Machine vices RB and RH: Steel body with stationary jaw, drop forged or body made from spherical graphite

More information

5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM

5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access

More information

IDEAL FOR 5-AXIS MACHINING

IDEAL FOR 5-AXIS MACHINING IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located

More information

MACHINE TOOL ACCESSORIES

MACHINE TOOL ACCESSORIES VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE

More information

IDEAL FOR 5-AXIS MACHINING

IDEAL FOR 5-AXIS MACHINING IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located

More information

Clamping devices 521

Clamping devices 521 Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps

More information

QUICK, FLEXIBLE AND COPLANAR

QUICK, FLEXIBLE AND COPLANAR EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,

More information

Precision made in Germany. As per DIN The heart of a system, versatile and expandable.

Precision made in Germany. As per DIN The heart of a system, versatile and expandable. 1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

Pull-down clamps. No Low height clamping jaws, model Bulle

Pull-down clamps. No Low height clamping jaws, model Bulle Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.

More information

Turning and Related Operations

Turning and Related Operations Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.

More information

Kesel Clamping Systems

Kesel Clamping Systems Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel Tradition and modernity A strong company, a strong group We have been at home

More information

Kesel Clamping Systems

Kesel Clamping Systems Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel A strong company, a strong group Kesel Managing Director Martin K. Klug The people

More information

STAMPING TECHNOLOGY - CLAMPING RAW PARTS

STAMPING TECHNOLOGY - CLAMPING RAW PARTS simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis

More information

PZS. Precision vices. Precision vices PZS

PZS. Precision vices. Precision vices PZS Simple clamping and releasing with the inner hexagon key. Type 735-60 PL-S micro with quick adjustment Item no. Size Squareness Parallelism Jaw G H J Work locator 1179514 1 0,005 0,002 34 25 15 75 20 20

More information

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth

Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50

More information

Standard CATALOGUE 2018

Standard CATALOGUE 2018 Standard Clamping Elements CATALOGUE 2018 Company history 1890 Company founded as a lock manufacturer by Andreas Maier. 1920 Product range extended to include spanners. 1928 Production line assembly of

More information

COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST

COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST 2 ALLMATIC PRODUCT FINDER THE FAST WAY TO THE RIGHT PRODUCT! Do you want 24/7 support? No problem! Our product finder is available to you around the clock

More information

Lathes. CADD SPHERE Place for innovation Introduction

Lathes. CADD SPHERE Place for innovation  Introduction Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to

More information

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine.

Servomill. Multipurpose Milling Machine Servomill. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine for workshop applications, single parts production and training purposes Servo motors and preloaded ball screws on all axes infinitely

More information

The new generation with system accessories. Made in Europe!

The new generation with system accessories. Made in Europe! 1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.

More information

Collet Closer & Tailstock Options

Collet Closer & Tailstock Options Collet Closer & Tailstock Options Fail-Safe Collet Closers Spring-close, air-to-open for fail-safe operation (85psi max) Part remains clamped even if loss of air should occur Non-adjustable grip force

More information

.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete

.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1000 universal metal lathe machine is a fantastic model for small to medium-size turning works

More information

Useful accessories for lathe and milling systems.

Useful accessories for lathe and milling systems. 1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,

More information

.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete

.com More than a machine. Power your life. Precise Centre Metal Lathes. Advanced Technology, Complete Precise Centre Metal Lathes. Advanced Technology, Complete Equipment, Easy-to-Operate. This kind of MM-D420X1500 universal metal lathe machine is a fantastic model for small to medium-size turning works

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine.

Multipurpose Milling Machine Servomill 700. Conventional Multipurpose Milling Machine. Multipurpose Milling Machine Conventional Multipurpose Milling Machine For workshop application, single parts production and training purposes Servo motors and preloaded ball screws on all axes Infinitely

More information

.com More than a machine. Power your life

.com More than a machine. Power your life Heavy Duty Swivel Head Bed-Type Universal Milling Machine Ideal for Machining Large Work-pieces This kind of MM-KB2100 is the Heavy Duty Swivel Head Bed-Type Universal Milling Machine featuring large cross

More information

THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines

THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines THE FUTURE RIGHT NOW PRECISION lathes, drilling- and milling machines turning milling drilling WABECO lathes > D2000 D2400 D3000 precise lead screw lathe in-house design and production the classics - tried

More information

50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment

50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please

More information

First B2B eshop of the clamping technology industry

First B2B eshop of the clamping technology industry VICES 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The first

More information

ZeroClamp. machine tool components

ZeroClamp. machine tool components ZeroClamp machine tool components Even at a low $80 dollar hourly rate, every minute the spindle isn t turning is costing you more than $1 dollar... The tailor-made solution How do you increase machine

More information

PRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs

PRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs KOPAL PRESENTATION Vertical pressure clamping System KOPAL With neither riser block nor adjusting required, the system allows a continuous adaptation of the clamping height whilst retaining the clamping

More information

» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light

» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light » Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping

More information

FLOOR TYPE MILLING-BORING CENTRE

FLOOR TYPE MILLING-BORING CENTRE FR FLOOR TYPE MILLING-BORING CENTRE FR FLOOR TYPE MILLING-BORING CENTRE MULTI-PURPOSE MILLING AND BORING MACHINE HIGH PERFORMANCE, ROBUST MACHINING Greater accuracy and higher efficiency FR FLOOR TYPE

More information

5-Axis Machine Tools from SMW-AUTOBLOK

5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping

More information

Vice novelties Clamping technology for NC machining. driven by technology

Vice novelties Clamping technology for NC machining.  driven by technology Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.

More information

INCREASE YOUR MACHINE UPTIME!

INCREASE YOUR MACHINE UPTIME! INCREASE YOUR MACHINE UPTIME! QUICK CHANGEOVER The right machine, processes, tooling and workholding reducing the in between time is a key factor! Jergens Ball Lock Mounting system is the original quick-change

More information

Table of contents VICES

Table of contents VICES Table of contents VICES NC-Compact vices RKK with SA / SGN jaws 4010 Accessories RKK 4012 RKE 4016 Accessories RKE 4018 Special Accessories RKK / RKE 4020 RKE-L 4022 Accessories RKE-L 4024 RKG-L 4028 Accessories

More information

Precision Chucks for Improved Accuracy and Increased Productivity

Precision Chucks for Improved Accuracy and Increased Productivity Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open

More information

Vario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.

Vario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower. 124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out

More information

Affordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms.

Affordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms. 1 of 5 23/10/2007 9:53 PM Affordable Durable, Variable Speed Vertical Mills... Delivering all the power, precision & versatility you need in today s Toolrooms Overview Standard Features DRO Specifications

More information

Save Set-up Time... and More!

Save Set-up Time... and More! System Bock Save Set-up Time... and More! Bock Locator Plates The foundation for quick change workholding efficiency. The Bock Locator Plate is a hard coated aluminium subplate with precision bored and

More information

TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information

TOGGLE CLAMPS. Holding Pressure Competitor Conversion Index General Information Holding Pressure Competitor Conversion Index... 124 General Information... 124 Hold Down Action Vertical Handle... 125-129 Horizontal Handle... 130-132 Toggle Pliers... 133-134 Straight Line Action...

More information

T-Slot Clamps Rotagrip Ltd Tel Website

T-Slot Clamps Rotagrip Ltd Tel Website T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size

More information

WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.

WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator. Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for

More information

2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining

2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining 21 / 215 Vischer & Bolli Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More

More information

VHF 2 VHF 2. Vertical Milling Machine

VHF 2 VHF 2. Vertical Milling Machine Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis

More information

Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition

Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:

More information

SALE SALE SALE palmgren.com chhanson.com SWIVEL BASES SPEED HANDLES

SALE SALE SALE palmgren.com chhanson.com SWIVEL BASES SPEED HANDLES FRIENDS OF PALMGREN SPECIAL OFFERS WORKHOLDING S EVENT DUAL FORCE PRECISION MACHINE VISES Palmgren s Dual Force line of machine vises are all designed for precision part clamping and are ideal for use

More information

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered

20 Flat Nose Pliers. 22 Round Nose Pliers ØD1 DIN ISO short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 Flat Nose Pliers DIN ISO 5745 short, flat jaws serrated gripping surfaces special tool steel, oil-hardened and tempered 20 01 160 20 02 160 20 06 160 Part No. Head Handles Dimensions Weight Length W3

More information

Zero Point Clamping System. ZERO lock BALL lock

Zero Point Clamping System. ZERO lock BALL lock Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping

More information

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered precision. empowered. A selection of our most popular products THe BeST OF 2018 A selection of our most popular products THe BeST OF 2017 selection of of our our most most popular popular products products AA selection To view the complete complete range range visit

More information

HOLD IT. EVEN PRESSURE. ODD SIZES. INTRODUCING THE AUTO-PRO AUTO-ADJUST TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL

HOLD IT. EVEN PRESSURE. ODD SIZES. INTRODUCING THE AUTO-PRO AUTO-ADJUST TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL HOLD IT. INTRODUCING THE AUTO-PRO TOGGLE AND DOG CLAMPS, DOG PEG TABLE FENCES AND BRACKETS BY ARMOR TOOL EVEN PRESSURE. ODD SIZES. PATENTED MECHANISM 888.695.3055 armor-tool.com TABLE OF CONTENTS Auto-Pro

More information

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING

PUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight

More information

THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS

THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS THE MOST IMPORTANT FACTS ABOUT SUPPORT BLOCKS > Material: High quality tempering steel resp. castings. > Machining: All support blocks shown, have machined base- and contact faces. The serrated elements

More information

adaptivemechanical adaptive

adaptivemechanical adaptive Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270

More information

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES

OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting

More information

WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.

WF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator. Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for

More information

Universal Machining Chucks. 4-Jaw Vertical

Universal Machining Chucks. 4-Jaw Vertical Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body

More information

HEAVY DUTY BENCH GRINDERS

HEAVY DUTY BENCH GRINDERS HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with

More information

Modular transfer system. PDF- Catalog Modular Transfer System

Modular transfer system. PDF- Catalog Modular Transfer System Modular transfer system PDF- Catalog Modular Transfer System 1 Modular Transfer System TLM 1000 156, route de Lyon 38300 DOMARIN FRANCE Phone (33) 4 37 03 33 55 Fax (33) 4 37 03 33 59 September 2001 edition

More information

SCHMIDT HydroPneumaticPress

SCHMIDT HydroPneumaticPress Maximum orce Range from 15 kn to 220 kn / 3,375 lbs. to 49,460 lbs. The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for optimally transforming, joining and assembling within

More information

Typical Parts Made with These Processes

Typical Parts Made with These Processes Turning Typical Parts Made with These Processes Machine Components Engine Blocks and Heads Parts with Complex Shapes Parts with Close Tolerances Externally and Internally Threaded Parts Products and Parts

More information

vario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker

vario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground

More information

Especially suitable for work in restricted working spaces.

Especially suitable for work in restricted working spaces. Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.

More information

Machine with optional equipment

Machine with optional equipment EMCOMat FB-3 L [Vertical milling head] - Swivels +/-90 - Speedy changeover to horizontal milling - Outstanding repeat accuracy - Quiet operation - Adjustable precision taper roller bearings [Control panel]

More information

Specifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)

Specifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent) Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of

More information

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side

no mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable

More information

STAMPING TECHNOLOGY - CLAMPING RAW PARTS

STAMPING TECHNOLOGY - CLAMPING RAW PARTS simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis

More information

BuildPro Welding Tables

BuildPro Welding Tables Introducing the new BuildPro Welding Tables The affordable, professional BuildPro Welding Tables are setting a new standard in price and performance. Plates can be reconfigured to extend the width of the

More information

powerful. Vices 2013/2014

powerful. Vices 2013/2014 powerful. Vices 2013/2014 www.roehm.biz VICES NC-Compact vices Basic - RKE NEW 4010 Accessories RKE 4012 Special accessories RKE/RKK 4014 Short - RKE-LV 4018 Accessories RKE-LV 4020 Short - RKE-M LV 4022

More information

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS

Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Chapter 22 MACHINING OPERATIONS AND MACHINE TOOLS Turning and Related Operations Drilling and Related Operations Milling Machining Centers and Turning Centers Other Machining Operations High Speed Machining

More information

NEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)

NEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92) NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without

More information

NEW EASYLOCK ZERO POINT CLAMPING SYSTEM. Palletising and clamping tools from a single source

NEW EASYLOCK ZERO POINT CLAMPING SYSTEM. Palletising and clamping tools from a single source NEW EASYLOCK ZERO POINT CLAMPING SYSTEM Palletising and clamping tools from a single source EASYLOCK ZERO POINT CLAMPING SYSTEM Clamping the workpiece can be a time-consuming and cost-intensive factor

More information

PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT

PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT PERFORMANCE RACING AND ENGINE BUILDING MACHINERY AND EQUIPMENT F68A Programmable Automatic Machining Center AC Servo Motors and Power Drawbar Hardened Box Way Column Touch Screen Control INDUSTRY EXCLUSIVE

More information

An Adjustable Threading Feed Attachment for a Lathe Without Metric Threading Capability, by Ted Clarke

An Adjustable Threading Feed Attachment for a Lathe Without Metric Threading Capability, by Ted Clarke An Adjustable Threading Feed Attachment for a Lathe Without Metric Threading Capability by Ted Clarke Metric pitch threads, with the exception of the Royal Microscopical Society (RMS) 36 threads per inch

More information

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602

Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602 596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for

More information

MacroJunior & MacroCombi

MacroJunior & MacroCombi MacroJunior & MacroCombi gives extreme flexibility one chuck, two systems reduces setting-up times. ensures precision and quality is suitable for automatic changing with System 3R s automation program.

More information

Professional welding tables

Professional welding tables Professional welding tables WELDING TABLES ACCESSORIES STOPS PRESSURERS/CLAMPS/GRIPS BOLTS weldingmaster We are the manufacturers of modular welding tables. Weldingmaster tables are highly innovative products,

More information

TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head

TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head TU-3008G-16M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-16AV Mill Head Package Deal Ex GST Inc GST $3,980.00 $4,577.00 Package Contents - SAVE $402.50 (Inc) 1 x L691

More information

KELTON CARVING JIG Guide for Use

KELTON CARVING JIG Guide for Use KELTON CARVING JIG Guide for Use The Kelton Carving Jig has been designed to securely hold a work piece at the desired angle and working height. While it will greatly benefit wood tuners and carvers, its

More information

Vises indd 33 6/28/10 10:54:45 AM

Vises indd 33 6/28/10 10:54:45 AM www.irwin.com s s The Complete solution for s With a diverse offering that ranges from widely-used general purpose vises to the most popular specialty vises, IRWIN vises are built to handle any job. The

More information

March weeks. surcharge for

March weeks. surcharge for March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not

More information

Makro Grip. Quick Point. Quick Tower. Grip Fix Stamping Unit page 14. Grip Fix Mobile Stamping Unit page 16. Grip Fix Accessories page 18

Makro Grip. Quick Point. Quick Tower. Grip Fix Stamping Unit page 14. Grip Fix Mobile Stamping Unit page 16. Grip Fix Accessories page 18 Grip Fix 8 Grip Fix Stamping Unit page 14 Grip Fix Mobile Stamping Unit page 16 Grip Fix Accessories page 18 Automation Clean Tec Quick Tower Quick Point Makro Grip Präge Fix Grip Fix 9 Grip Fix Our patented

More information

DIVIDING EQUIPMENT DIVIDING EQUIPMENT

DIVIDING EQUIPMENT DIVIDING EQUIPMENT 64 DIVIDING EQUIPMENT 65 D-01 UNIVERSAL TILTING ROTARY TABLE Model: HUT-300 QUICK MANUAL INDEXING. Suitable for milling, boring, shaping, drilling, dividing, setting angles and for circular cutting. Tilting

More information

TURNING BORING TURNING:

TURNING BORING TURNING: TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single

More information

Model PM Series Three Axis Mills

Model PM Series Three Axis Mills Model PM Series Three Axis Mills PM3000 PM2000 Features Setup & Operation Technical Data CLIMAX Portable Machine Tools, Inc. 10/98 1 Features Climax's PM Series 3-axis portable milling machines provide

More information

Quick-Release Front Vise 05G34.01

Quick-Release Front Vise 05G34.01 Quick-Release Front Vise 05G34.01 Patent Pending Introduction A front vise is the most generally useful vise on a typical workbench. It can be used for clamping parts on edge within the jaws, for clamping

More information

MECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B

MECHANIC VISES VERSATILE, RUGGED AND BUILT WITH YOU IN MIND A B wiltontool.com Wilton is committed to being a supplier you can depend on for the epitome of quality, innovation and service. This isn t just a statement to make us sound good it s a reality that has been

More information

Compatibility overview of accessories for milling machines

Compatibility overview of accessories for milling machines Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy

More information

Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining

Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing

More information

The new generation with system accessories. Made in Germany!

The new generation with system accessories. Made in Germany! 1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening

More information

Clamping bolts Eccentrical cams clamping units

Clamping bolts Eccentrical cams clamping units 2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft

More information

GF Machining Solutions. System 3R. Tooling. for wire EDMing

GF Machining Solutions. System 3R. Tooling. for wire EDMing GF Machining Solutions System 3R Tooling for wire EDMing Design and quality by System 3R Contents Basic equipment, WEDM...page 6 Basic equipment, Macro...page 8 Mounting heads...page 15 Holders and vices

More information

V-Turn 410/ PRECISION LATHE

V-Turn 410/ PRECISION LATHE PRECISION LATHE Page 2. Highlights Page 3. Machine construction and feed system Page 3. Main spindle drive Page 4. Toolpost Page 4. Tailstock and auxiliary systems Page 5. 3 Axis Digital Read Out - X.pos

More information

CNC Grinding Center Model Evolution

CNC Grinding Center Model Evolution CNC Grinding Center Model Evolution High-Precision Tool Grinding Machine with 5 Axes The newest dimension in tool grinding Quality without compromise The Model Evolution has been developed for the production

More information

SA SERIES SURFACING MACHINES

SA SERIES SURFACING MACHINES SA SERIES SURFACING MACHINES The S8A is designed to surface large diesel heads, blocks and manifolds. All SA machines use the same tooling and fixturing for quick, rigid setup and versatility. Fine surface

More information