5-Axis Machine Tools from SMW-AUTOBLOK
|
|
|
- Antony Robertson
- 5 years ago
- Views:
Transcription
1 -Axis Machine Tools from SMW-AUTOBLOK -Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use Jaws with SinterGrip clamping inserts for clamping of workpieces with lowest depth and without pre-marking Compact design with best accessibility of the machine spindle High adjustable clamping forces Interfaces for all well known zero point clamping systems Wide range of standard accessories 0 SMW-AUTOBLOK
2 2 -Axis Machine Tools GT -Axis Machine Tools Ideal suitable for OP 10 use Compact design High clamping forces With SinterGrip clamping insert jaws Page 2 GT Jaws and Accessories Jaw with pull-down Base plate with interface for zero point clamping system SMW-AUTOBLOK APS Compatible also to VERO-S, Unilock, AMF Grip inserts Page 3 ST -Axis Machine Tools ST 100 and ST Centrical clamping Ideal suitable for OP 10 use Very compact design Large clamping range With SinterGrip clamping insert jaws Page 7 ST Interface Plates For the adaption of the ST on zero point clamping system SMW-AUTOBLOK APS Compatible also to VERO-S, Unilock, AMF, Lang Page 61 ST Jaws and Accessories Top jaws for SinterGrip inserts Clamps Positioning keys Page 62 SMW-AUTOBLOK 1
3 GT -Axis Machine Tool Ideal suitable for OP 10 use High level of accessibility Application/customer benefits -axis machine tool, ideal suitable for raw part clamping OP 10 Jaws with SinterGrip clamping inserts as a standard High level of accessibility due to the extra compact design High clamping force Precise adjustment of the clamping force by using a torque wrench Optional workpiece stop Technical features High clamping force (until 3 kn) Jaws with SinterGrip clamping inserts for clamping of workpieces with lowest depth and without pre-marking Clamping range 100 mm or 200 mm Optional: Interface for zero point clamping system APS 140 Standard equipment -axis machine tool with wrench key, 1 pair of positioning keys for mounting, 1 pair of SinterGrip top jaws, 10 pcs. SinterGrip inserts for steel, key T9 (base plate optional available) SinterGrip GT GT (Technical information with standard top jaws) Order review A B Weight kg GT GT Clamping force diagram Clamping force [kn] GT Torque [Nm] 2 SMW-AUTOBLOK
4 -Axis Machine Tool GT Top jaws with pull-down for OP 20 GT top jaws with pull-down for OP 20, hardened, fully sealed Protection cover Smooth clamping surface with pull-down 0.3 mm for finish machining OP 20 2 Direct mounting on GT (M) proofline series fully sealed low maintenance Workpiece 30,8 3,3 0,3 Parallels with quick change CLAK-System for support of the workpiece (different heights) Workpiece clamping: Workpiece support direct on -axis machine tool GT Workpiece clamping: Workpiece support on parallels with quick change (CLAK) Width Height Pull down Weight mm mm mm kg GT Pair consisting of 2 pieces pull-down jaws SMW-AUTOBLOK 3
5 GT -Axis Machine Tool Base plate Top jaws GT base plate with interface for zero point clamping system B B 14 (188,) 14 (188,) 100 (3,) 100 (3,) SMW APS 140 Schunk VERO-S 138 Unilock AMF K20 B-B M 6.4 H M Ø 2H7 10 Ø19 M Ø (170) (170) 31 (410) GT GT GT top jaws for clamping inserts SinterGrip Set consisting of 2 pieces top jaws for SinterGrip SinterGrip Page GT 4631 GT top jaws smooth/serrated Set consisting of 2 pieces serrated and smooth GT SMW-AUTOBLOK
6 -Axis Machine Tools GT Grip Inserts Different versions Example: Clamping of a workpiece by using grip inserts 2 Id.-No. GT Grip insert smooth, height 11 mm Ø 29 smooth height 11 mm set consisting of 4 grippers and 4 fixing screws 11 Ø 22 GT 463 GT Grip insert serrated, height 11 mm Ø 29 Ø 2 serrated height 11 mm set consisting of 4 grippers and 4 fixing screws 11 Ø 22 GT 4636 GT Grip insert smooth, height 19 mm Ø 29 smooth height 19 mm set consisting of 4 grippers and 4 fixing screws 19 Ø 22 GT 4637 SMW-AUTOBLOK
7 GT -Axis Machine Tool Accessories GT Grip insert serrated, height 19 mm Ø 29 Ø 2 serrated height 19 mm set consisting of 4 grippers and 4 fixing screws GT 4638 Ø Ø 22 GT Grip insert smooth, height 24 mm smooth height 24 mm set consisting of 4 grippers and 4 fixing screws Ø 22 GT 4639 GT Grip insert serrated, height 24 mm Ø 29 serrated height 24 mm set consisting of 4 grippers and 4 fixing screws 24 Ø 22 GT GT torque wrench For precise adjustment of the clamping force of the GT GT SMW-AUTOBLOK
8 -Axis Machine Tool High precision Self-centering clamping ST 100/8 Application/customer benefits High precise -axis centric clamping vise Compact design for best accessibility Jaws with SinterGrip clamping inserts Clamping of workpieces with lowest depth and without pre-marking Large clamping range Flexible use Technical features Centrical clamping Clamping range 7 until 8 mm Clamping force up to 20 kn (70 Nm) Jaw width 100 mm 2 Standard equipment -axis machine tool with wrench, 1 pair top jaws with 10 pieces SinterGrip clamping inserts for steel SinterGrip Page 7 min. - 8 max 0 min max 3, 3, 72, 2, A Ø10 H7 (2x) M8 (8x) M ch ±0,02 1 ±0,02 Order review Clamping Range ST 100/8 7-8 mm SMW-AUTOBLOK 7
9 ST 100/1 -Axis Machine Tool High precision Self-centering clamping Application/customer benefits High precise -axis centric clamping vise Compact design for best accessibility Jaws with SinterGrip clamping inserts Clamping of workpieces with lowest depth and without pre-marking Large clamping range Flexible use Technical features Centrical clamping Clamping range 7 until 8 mm (jaw position 1) or 7 until 1 mm (jaw position 2) Clamping force up to 20 kn (70 Nm) Jaw width 100 mm Standard equipment -axis machine tool with wrench, 1 pair top jaws with 10 pieces SinterGrip clamping inserts for steel, 10 pieces SinterGrip protection covers SinterGrip Jaw position 1 7 min. - 7 max 0 min max 3, 3 A 7 min. - 1 max 69 min max 3, 74, 3, M6 (4x) 19 A 180 Ø 10 H7 27, 47 74, ±0,02 74, 24 M , Ø 10 H7 (2x) Jaw position M8 (8) 60 ch ±0,02 Order review Clamping Range ST 100/1 7-1 mm SMW-AUTOBLOK
10 -Axis Machine Tool ST /18 High precision Self-centering clamping Application/customer benefits High precise -axis centric clamping vise Compact design for best accessibility Jaws with SinterGrip clamping inserts Clamping of workpieces with lowest depth and without pre-marking Large clamping range Flexible use Technical features Centrical clamping Clamping range 7 until 18 mm Clamping force up to 2 kn (100 Nm) Jaw width mm Interface for zero point clamping system Lang 96 mm as a standard 2 Standard equipment -axis machine tool with wrench, 1 pair top jaws with 10 pieces SinterGrip clamping inserts for steel SinterGrip 7 min max 3, 2, 6 72, Ø 16 H7 (4x) Ø 10 H7 (2x) 280 A M6 (4x) M8 (8x) ±0,02 ch ±0, Lang 96 (4x) 96 ±0, ±0,02 Order review Clamping Range ST / mm SMW-AUTOBLOK 9
11 ST /22 -Axis Machine Tool High precision Self-centering clamping Application/customer benefits High precise -axis centric clamping vise Compact design for best accessibility Jaws with SinterGrip clamping inserts Clamping of workpieces with lowest depth and without pre-marking Large clamping range Flexible use Technical features Centrical clamping Clamping range 7 until 17 mm (jaw position 1) or 72 until 22 mm (jaw position 2) Clamping force up to 2 kn (100 Nm) Jaw width mm Interface for zero point clamping system Lang 96 mm as a standard Standard equipment -axis machine tool with wrench, 1 pair top jaws with 10 pieces SinterGrip clamping inserts for steel, 18 pieces SinterGrip protection covers SinterGrip Jaw position 1 7 min max 3, 27, 72 min max , 19 Ø 16 H7 (4x) Ø 10 H7 (2x) 280 M6 (4x) 27, 47 74, 66 A , 96 ±0, ±0, , Ø 16 H7(4x) Ø 10 H7(2x) M6 (4x) Jaw position M8 (8x) ch Lang 96 (4x) ±0, ±0,02 Order review Clamping Range ST / mm SMW-AUTOBLOK
12 Interface Plates for -Axis Machine Tool ST Accessories Interface plates for the adaption on zero point clamping systems SMW APS 140 Schunk VERO-S 138 Unilock AMF K H7 Lang 2 (4x) Lang 96 (4x) H Ø ± Ø 10 H ± 0.02 M8 (4x) Ø 9 (8x) M10 (4x) 10 M10 M (4x) 9 16 ST 100 Ø 1 Ø 16 H7 Ø H Ø 13 (2x) Ø 2 H7 SMW APS 140 Schunk VERO-S 138 Unilock AMF K20 (3x) 96 H Lang 96 (4x) H ± 0.02 Ø 9 (8x) M10 (4x) 200 M10 M (4x) Ø 10 H ± Ø 1 6 Ø 16 H7 (4x) Ø 2 H7 Ø 13 (2x) ST ST ST SMW-AUTOBLOK 61
13 ST ST Top jaw single-stepped Accessories Top jaws Clamps, positioning keys ST ST set 2 pcs., without SinterGrip clamping inserts ST Top jaw double-stepped ST ST set 2 pcs., without SinterGrip clamping inserts Workstop ST Pair of clamps T consisting of: Pair of clamps incl. T-nuts and screws T mm 14 mm 16 mm 18 mm 20 mm 22 mm ST Pair of positioning keys T h6 T h6 mm ST Pair of positioning keys (special dimensions) T h6 Th6 mm - h6 14 mm - h6 16 mm - h6 18 mm - h6 20 mm - h6 22 mm - h6 ST SMW-AUTOBLOK
14 Notes 2 SMW-AUTOBLOK 63
5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
Lowest clamping depth without pre-marking
Lowest clamping depth without pre-marking Thanks to the SinterGrip clamping inserts, it is possible to clamp workpieces safe with a clamping depth of just 3.5 mm, so the workpiece can be completely machined
Lowest clamping depth without pre-marking
Lowest clamping depth without pre-marking Thanks to the clamping inserts, it is possible to clamp workpieces safe with a clamping depth of just 3.5 mm, so the workpiece can be completely machined in a
IDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
IDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
Precision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth
Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50
Overview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
adaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing
Vise clamping inserts
Vise clamping inserts 05/2015 Contents: Introduction / Product Overview SinterGrip...4 The advantages of the system...5 Technical features...6-7 Charts...8 Jaws STNDRD...9 Jaws STRTER KIT...10 SinterGrip
NEW DURO-TA XT KEY BAR CHUCK. The flexible lightweight for large and small workpieces
NEW DURO-TA XT KEY BAR CHUCK The flexible lightweight for large and small workpieces DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility
Jaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories
Chuck adapters Top jaws T-nuts Grippers Gripping force meter Grease Accessories Chuck adapters DIN 55026/ISO-A 702/1 Mounting adapters on short taper spindle noses direct and indirect mounting reduction
2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
21 / 215 Vischer & Bolli Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More
STAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
Modular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
KSM2 Multi Clamping Vise. The Allrounder in Workpiece Clamping
The Allrounder in Workpiece Clamping Superior Clamping and Gripping Top Performance in the Team SCHUNK is the world s No. 1 in clamping technology and gripping systems from the smallest parallel gripper
NEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
VISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES
CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting
Vice novelties Clamping technology for NC machining. driven by technology
Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.
. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
Clamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
ST5-2G SELF-CENTERING VICE NEW. from SMW-AUTOBLOK. SEALED Safed spindle. HIGH PRECISE Highest repeatability
NEW ST5-2G SEF-CENTERING VICE from SMW-AUTOOK SEAED Safed spindle IG PRECISE ighest repeatability C O M PA C T Design arge windows for optimized chip removal SAFE Top jaws with SinterGrip clamping inserts
5 th Innovative Workholding Solutions
5 th Innovative Workholding Solutions 5 th Innovative Workholding Solutions Q4 Metric Workholding Evolved. 5thaxis.com 7140 Engineer Rd. San Diego, CA 92111 Tel: 858-505-0432 Fax: 858-505-9344 Email: workholding@5thaxis.com
5-AXIS CLAMPING SYSTEM + ACCESSORIES
5-AXIS CLAMPING SYSTEM + ACCESSORIES CONTENTS Visual Directory P. 10 Jaw Vices P. 11 27 GERMANY norelem Normelemente KG Volmarstraße 1 71706 Markgröningen Tel. +49 7145 206-41 Fax. +49 7145 206-66 info@norelem.de
Kesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel Tradition and modernity A strong company, a strong group We have been at home
Vario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
5 ht Rocklock TM Metric
Rocklock TM Metric Medium or Large Vise Top Tooling with Adapter All 5th Axis RockLock fixtures utilize industry standard pull stud spacing ensuring compatibility with Jergens, Lang, and other systems
T-Slot Clamps Rotagrip Ltd Tel Website
T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size
INCREASE YOUR MACHINE UPTIME!
INCREASE YOUR MACHINE UPTIME! QUICK CHANGEOVER The right machine, processes, tooling and workholding reducing the in between time is a key factor! Jergens Ball Lock Mounting system is the original quick-change
50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
Precision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
Kesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel A strong company, a strong group Kesel Managing Director Martin K. Klug The people
CAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
N/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
r e w o e P m xtre r e o F
For extreme Power 1 2 The origin of the product The Piranhaclamp-system was invented in Switzerland in 2012 by 2 bright engineers. The system was designed for automated machines in 5-axis machining. A
HOW TO WORK WITH HERMANN SCHMIDT
HOW TO WORK WITH HERMANN SCHMIDT Visit HSCHMIDT.COM Find in-depth product details and resources. View large library of configuration examples. Order products online: Pay by credit card. Terms customers
Efficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
PF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
WM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
Machine vices RB and RH
Overview Machine vices RB and RH For high clamping accuracy Special technical features of the RÖHM Machine vices RB and RH: Steel body with stationary jaw, drop forged or body made from spherical graphite
Pull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
FORM HOLDING CLAMPS 8. 1 FORM HOLDING CLAMPS JAWS MOUNTING-ON-LATHE ADAPTERS. FORM HOLDING CLAMPS Wedge Style/Round
pag..4 JAWS pag..6 MOUNTING-ON-LATHE ADAPTERS pag..7 Wedge Style/Round pag.. Wedge Style/Square pag..10 pag..12 JAWS for external Form Holding pag..14 JAWS for internal Form Holding pag..16 TAPERED SCREWS
Workholding systems / Machine vices
Program summary Workholding systems / Machine vices Flexible workholding systems 5-axis machining Double and multiple workholding systems Tower workholding systems Concentric workholding systems Automation
COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST
COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST 2 ALLMATIC PRODUCT FINDER THE FAST WAY TO THE RIGHT PRODUCT! Do you want 24/7 support? No problem! Our product finder is available to you around the clock
STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
innovations 2013 More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System
innovations 2013 CLAMPING. SCREWING. LOCKING. More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System - Grippers - and much more...
Clamping devices - mechanical
Zero point reference also on down draw clamps A fixed zero point reference on down draw clamps is self-evident in the STARK zero point mounting system. This zero point reference on down draw clamps is
LOW PROFILE CLAMPING. Jergens OK-Vise. Micro Clamps
Jergens OK-Vise Serrated and Smooth Jaws...296 Machinable Jaw... 297 Mounting Jaw... 298 Self-Adjustable...299 Pull-Down... 300 301 Economy... 302 Low Profile Comparison Chart... 303 Multi-Rail RM System...
Double Locating Fixed Vise w/.500 locating holes. Adjustable Vise w/.500 locating holes
VISES VISES EZE-VISE TM MODULAR SETUPS Low profile, low cost modular vise set incorporates features found in higher priced products: positive location in 3-axes, raised locator surface to facilitate drilling
Compatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning Face clamping disc Ø 170 mm 3440295 Face clamping disc Ø 240 mm 3441352 Face clamping disc Ø 250 mm 3440552 Face clamping disc
TOOLS AND INSTALLATION
TOOLS AND INSTALLATION Safe, leak-free operation of any high-pressure system is dependent on correctly prepared and installed connections. This section outlines proper instructions for the machining and
Matsuura MX-330 MAM72-35V MAM72-63V Triag International Workholding Systems
A perfect combination Matsuura MX-330 MAM72-35V MAM72-63V Triag International Workholding Systems Boost value added with Triag International standard clamping systems in the high-performance machining
Circular welding units Circular welding unit model Z (Pneumatic Torch Positioner)
ircular welding units ircular welding unit model Z-0006-598 (Pneumatic Torch Positioner) Torch stand / 20 Stroke vertical: 290 mm Stroke horizontal: 770 mm Max loading: 30 kg part no. 019.0.0305 Pivot
STAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
QUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
Hardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
TECHNICAL INFORMATION Models No.
TECHNICAL INFORMATION Models. Description 6207D, 6217D, 6237D,, 9.6V, 12V, 14.4V Cordless Driver Drills 10mm (3/8") 12V, 14.4V, 18V Cordless Driver Drills 13mm (1/2") CONCEPT AND MAIN APPLICATIONS These
Technical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
SCHUNK New Products and Innovations
SCHUNK New Products and Innovations Your SCHUNK HRC gripper competence The answer to the challenges of human/ robot collaboration: The awarded SCHUNK Co-act Gripper JL. In the future it will transmit all
PRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
Clamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
PATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
First B2B eshop of the clamping technology industry
VICES 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The first
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
vario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
Climax Globe Valve Grinding Machines for conical seats
Climax Globe Valve Grinding Machines for conical seats Model Numbers:VM2050C, VM2100C, VM2150C Valve Seat Diameter Range: 0.4-6.0 (10mm-150mm) On Site grinding of globe valves with conical seats Easy to
SALE SALE SALE palmgren.com chhanson.com SWIVEL BASES SPEED HANDLES
FRIENDS OF PALMGREN SPECIAL OFFERS WORKHOLDING S EVENT DUAL FORCE PRECISION MACHINE VISES Palmgren s Dual Force line of machine vises are all designed for precision part clamping and are ideal for use
Face Drivers with appropriate changable parts and accessories
8 NEIDLEIN-SPANNZEUGE GmbH www.neidlein.de 9 Face Drivers with appropriate changable parts and accessories FSB FFB FSP FFBR FDNC FOR TURNING AND HARD TURNING WITH DRIVE PINS Face Drivers FSB / SB 10 Face
.. 8. 2. 9. 22. 0.. 2.. 2. 2.... 28. 29.... 8. 9. PBL Universal Ball-Lock Power Castings or forgings can be.d. or I.D. clamped Grips on taper up to 0 Jaws pivot up to to grip on uneven surfaces Ideal for
PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING
PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING Partner with Systematic Solutions Toolholding and Workhodling product range Toolholding Systems The TOTAL TOOLING program from SCHUNK: Precision toolholding
Modular Clamping Rail System SL120 & SL080
Original Installation and Operating Instructions Modular Clamping Rail System SL120 & SL080 Copyright ZEROCLAMP Modular Clamping Rail System Installation and Operating Instructions. These operating instructions
Quick-Release Front Vise 05G34.01
Quick-Release Front Vise 05G34.01 Patent Pending Introduction A front vise is the most generally useful vise on a typical workbench. It can be used for clamping parts on edge within the jaws, for clamping
New SCHUNK Products and Innovations. Gripping Systems
New SCHUNK Products and Innovations Gripping Systems Your SCHUNK Certified With the new SCHUNK Co-act EGP-C gripper, for the first time an inherently safe industrial gripper is being presented that is
GF Machining Solutions. System 3R. Mecatool WEDM. Productportfolio. Version 2, valid from July 1st. 2017
GF Machining Solutions System 3R Mecatool WEDM Productportfolio Version 2, valid from July 1st. 2017 Design and quality by System 3R Contents Zeroline...page ICS...page 7 Unimatic...page 15 Accessories...page
GF Machining Solutions. System 3R palletizing systems with Spreitzer clamping solutions
GF Machining Solutions System 3R palletizing systems with Spreitzer clamping solutions Workpiece clamping solutions to increase productivity The advantages of a palletable workpiece clamping solution //
InTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
MC-CVR-1. Király Trading KFT H-1151 Budapest Mogyoród útja
MC-CVR-1 Király Trading KFT H-11 Budapest Mogyoród útja -14 E-mail:_agi@kiralytrading.hu carver clamp Series Applications C-Style Carver Clamps A djustment screw is shielded and out of the work area Ideal
All dimensions shown as in [mm]
![All dimensions shown as in [mm]](/thumbs/87/95827464.jpg "All dimensions shown as in [mm]")
Page 1 of 19 Tensile / Pull Wedge grips All dimensions shown as in [mm] Heavy-duty grips designed for a range of tensile testing requirements up to 2,000 lbf [10 kn]. Self-tightening stainless steel serrated
Makro Grip. Quick Point. Quick Tower. Grip Fix Stamping Unit page 14. Grip Fix Mobile Stamping Unit page 16. Grip Fix Accessories page 18
Grip Fix 8 Grip Fix Stamping Unit page 14 Grip Fix Mobile Stamping Unit page 16 Grip Fix Accessories page 18 Automation Clean Tec Quick Tower Quick Point Makro Grip Präge Fix Grip Fix 9 Grip Fix Our patented
Always a step ahead... because zero point clamping has an origin!
Always a step ahead...... because zero point clamping has an origin! COMPACT RELIABLE FLEXIBLE STARK zero point clamping systems INNOVATIONS & SOLUTIONS www.stark-inc.com Zero point-based flexibility due
PRODUC TION VISES. Vises. 5-Axis Production Vises
Introduction to Design...104 105 VMC/HMC Solutions...106 107 Ball Lock Mounting System...108 109 Production Vises 4" (100 mm) Production Vises...110 112 6" (150 mm) Production Vises...113 115 Short 6"
Workholding Systems Double clamping system DF
Workholding Systems Double clamping system DF 05/2014 3.3420 Flexible double clamping system DF, mechanical-hydraulic and hydraulic Your benefits at a glance: Double machining Series arrangement Individual
INTERAPID Small Bench SHE.30 or SHE.35
0 to 0 mm Mobile measuring bolt mounted on a plain bearing, also fitted with a semi-circular releasing disc plate. Measuring inserts supplied in pairs. One is tighten on the measuring bolt, the other on
Compatibility overview of accessories for lathe
Compatibility overview of accessories for lathe Accessory parts for turning TU 1503 TU 2004 TU 2304 TU 2404 TU 2506 TU 2807 D 320 TU 3209 D 330 D 360 TU 3610V TZ 4012 D 420 TU 4210V D 460 TU 4615V TZ 5216
HAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
QUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
QUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
Self-Centering Vise. Owner s Manual. Operating Instructions. Care & Maintenance. Warranty Information
Self-Centering Vise Owner s Manual Operating Instructions Care & Maintenance Warranty Information Recommended Torque Specifications V00 Maximum Torque for Vise Assembly: ft lbs (.0 Nm) Maximum Torque for
Product Information. Deburring spindle FDB-AC
Product Information FDB-AC FDB-AC Compliant. Reliable. Flexible. FDB-AC deburring spindle Flexible deburring spindle for use in robotic applications Field of application Standard solution for flexible
ZeroClamp. machine tool components
ZeroClamp machine tool components Even at a low $80 dollar hourly rate, every minute the spindle isn t turning is costing you more than $1 dollar... The tailor-made solution How do you increase machine