5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
|
|
- Dale Stafford
- 5 years ago
- Views:
Transcription
1 WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM
2 MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access to the workpiece is absolutely essential for optimum and complete machining of a workpiece on all sides. MC Clamping System with Quintus Quick Clamping Block Simple and robust construction, smooth surfaces, easy cleaning. Special jaws as well as basic soft jaws for machining by the customer enlarge the range of applications. Grip jaws and V-type jaws enhance the retention force on the workpiece. 1 A wide range of positioning and fastening possibilities (grid tap holes, fitting holes, pull-in bolt) 2 1. MC 0, standard design clamping against fixed jaw 2. MC Z, self-centering with standard reversible step jaws. MC 0Z, self-centering with standard jaws, drooping shoulders. MC 0Z, self-centering, ideal as part of a device. MC 12Z, self-centering with special jaws (optional) 1 WWW. WORKHOLDINGSOLUTIONSGROUP. COM
3 QUINTUS BLOCK QUICKCLAMPING...flexibility and high efficiency for -axis machining Quintus Quick Clamping Block Zero point exact setup of different clamping devices in a few seconds! Basic set of equipment (MC vice, change pallets machined by the customer as well as change pallets with jaw chuck), is adapted to suit the Quintus quick clamping block. MC Clamping System with Quintus Quick Clamping Block Other flexible applications may be carried out by using customer-specific special solutions or by changing pallets equipped with jaw chucks or draw-in collet chucks. Quintus Pull-in bold 2 x kn Quintus 0 Pull-in bold 1 x 12 kn simple and robust design! no external power supply ( system, roll pin with positive fit) without Quintus only 2. revolutions on the spindle to reach full clamping force excellent price to performance ratio change in a few seconds tightening torque/clamping force (see page ) with Quintus ONE system / MANY solutions ONE system / MANY solutions 2
4 SCSCLAMPING SYSTEM for -axis machining SCS SCS Clamping System The SCS Super Compact Clamp, with its short base and ease of jaw movement, is ideally suited for -axis machining. The well-balanced design of the guide between the base and moveable jaw assists in the use of very high clamping jaws, which are essential for performing machining operations close to the workpiece. The base is made from special cast steel which guarantees high rigidity and dimensional stability. All sides are and ground, providing a reliable base for meeting the exacting demands of maximum precision. low risk of collision well-suited for short standard tools repeatable and controllable clamping forces of up to 2 kn/scs and 0 kn/scs 1 SCS 1 jaw with special grip for maximum holding force (factor as compared with standard jaw) affordable price; large range of accessories
5 MC Clamping Systems MC 0 Self-Centering MC 0 Standard MC 0 Standard hydraulic, power stroke mm MC 0 Self-Centering Hub 2-0, (Stroke -7 or -10) (Stroke -7 or -10) Stroke M x 8 deep (x) M8 x 12 deep 0, ,01 M8 x 12 deep 0, ,01 G 1/8 Hydraulically coupled connection 0,1 72 Ø8 x deep M8 x 12 deep 0 Drill bush Ø10 F7 x 12 deep 2 Drill bush Ø10 F7 x 12 deep ,1 2 0,01 Ø H7 x 8 deep (2x) M10 x 11 deep 0,01 Drill bush Ø10 F7 x 12 deep Jaw width 0 mm Clamping force 7. kn at 2 Nm Weight 1. kg Jaw width 0 mm Clamping force 1 kn at 2 Nm Weight. kg Part no. HR Jaw width 0 mm Clamping force 1 kn at 20 bar Weight.8 kg Part no. HR Jaw width 0 mm Clamping force 1 kn at 0 Nm Weight.8 kg Part no. HR Step jaw, fixed, Part no. HR Step jaw, fixed, Part no. HR Part no. HR Part no. HR Part no. HR on request Basic jaw, fixed, soft, 0 x x 2 mm Part no. HR Basic jaw, fixed, soft, 0 x x 2 mm Part no. HR Basic jaw, movable, soft, 0 x x 2 mm Part no. HR Basic jaw, movable, soft, 0 x x 2 mm Part no. HR Basic jaw, movable, soft, 0 x 2 x 2 mm Part no. HR Torque wrench, -0 Nm Part no. HR Socket wrench Part no. HR Torque wrench, -0 Nm Part no. HR Socket nut SW 8 for /8 Part no. HR Socket nut SW 12 for /8 Part no. HR with M10 screws Part no. HR with M10 screws Part no. HR with M10 screws Part no. HR with M12 screws Part no. HR with M12 screws Part no. HR with M12 screws Part no. HR Standardized versions for zero point clamping and changing systems MC 0 for STARK Speedy 0 system MiniClamp: HR (see above) HR (see above) HR (see above) with: HR adapter plate (factory-mounted) weight 1. kg 11 0,01 MC 12 Self-Centering step jaw, movable, and torque wrench see MC 12 Standard special jaw, extra high MC 0 for STARK Speedy 00 system MiniClamp: with: HR (see above) HR adapter plate HR (see above) (factory-mounted) HR (see above) weight 1. kg 11 0,01 special design, slide stepped Part no. HR Special jaw extra high (piece) Part no. HR9.8.00
6 MC Clamping Systems (cont.) Quintus Quick Clamping Block MC Self-Centering MC 12 Self-Centering standard design Quintus 0 Mechanically operated Pull-in force 1 x 12 kn at 0 Nm without fastening/positioning Operating spindle with hexagon SW 8 29 (Stroke 7) 7, (Stroke 7) 7, 12 Part no. HR (112,) Ø7 Centering bolt, changeable M ,01 Ø8 x deep 2x Ø2 x deep + M 10 x thread 0 0,1 27 0,1 0 0, ,02 A 0,02 A 0 0 Key block Reference key block M10x deep (8x) ,1 70 Jaw width mm Clamping force 2 kn at Nm Weight 17.8 kg Part no. HR drive side 0 1 H 2 0,02 A Ø8 x deep Jaw width 12 mm Clamping force kn at 0 Nm Weight 9 kg Part no. HR H Quintus Mechanically operated Pull-in force 2 x kn at Nm without fastening/positioning Part no. HR Ø7 0 2 Operating spindle with hexagon SW 1 M12 22 Part no. HR Part no. HR Key block Centering bolt, changeable (10) Reference key block Quintus 0 Accessories: fastening and positioning 2 Basic jaw, movable, soft, x 0 x 28 mm Part no. HR Torque wrench, -1 Nm Part no. HR Socket nut SW for 1/2 Part no. HR Torque wrench, 0-0 Nm Part no. HR Socket nut SW 19 Part no. HR HR Centering bolt D 0 g HR Centering bolt D 2 g HR Centering bolt D 0 g HR HR Key block, DIN 22 mm T-slot nut, DIN 08, mm 1 +0, +0,2 HR Adapter plate with pull-in bolt, parallelism 0.008/mm, may be machined by the customer min. Ø 2 mm - max. Ø mm min. Ø 2 mm - max. Ø 78 mm Operation SW max. max. 8 with M12 screws Part no Quintus Accessories: fastening and positioning HR9.8.1 Clamping system MC 0Z for Quintus 0, including pull-in bolt HR Pull-in bolt without centering (individual) Ø 170 x wide HR Adapter plate with -jaw chuck DIN 0-1 with pull-in bolt HR Centering bolt D 0 g HR Centering bolt D 2 g HR Centering bolt D 0 g HR HR Key block, DIN 22 mm T-slot nut, DIN 08, mm HR9.8.1 Clamping system MC Z for Quintus, including pull-in bolt HR Pull-in bolt with centering (individual) HR Pull-in bolt with balance (individual) 9 min. Ø 9 mm - max. Ø 12 mm 2 +0, +0,2 HR Adapter plate with pull-in bolt, parallelism 0.008/mm, may be machined by the customer Operation SW 10 min. Ø mm - max. Ø 10 mm Ø 10 x 10 wide max. max. 98 HR Adapter plate with -jaw chuck DIN 0-1 with pull-in bolt
7 SCS Clamping Systems SCS ly operated width of base: mm jaw widths: 2/0/ mm clamping range: -1 mm clamping force: max. 2 kn at 0Nm weight: 8.8 kg (),9 9 7, H8 M8x1 deep H ,01 SCS ly operated width of base: 1mm jaw widths: 0/8/1 mm clamping range: mm clamping force: max. 0 kn at Nm weight: 1. kg () 10, 7 7 H8 H8 M8 x 1 deep ,01 Part no. HR Part no. HR M10 x 11 deep , M10 x 1 deep (x) 0 0 Ø 10 F7x deep (2x) M10 x 1 deep (12x) Ø12 F7 x 1 deep M 12 x 18 deep (x) Ø 2+0,01 x deep and M10 x deep (2x) + - 0, , M12 x 18 deep (12x) 0 8 Fine step reversible jaw for maximum accessibility, even with short tools 2 mm HR mm HR mm HR , , 2, 0-0, mm HR mm HR mm HR * Fine steps are possible using spacer ledges -0,02 17,, 79 Special grip jaw, fine step jaw for holding force and very high cutting forces 2 mm HR mm HR mm HR ,, - 0, mm HR mm HR mm HR * Fine steps are possible using spacer ledges -0,02 17, 1,, 2-0,02 81, Soft reversible jaw made from aluminum/steel for adaptation to special workpiece geometries mm HR (steel) mm HR (alu) 97 1 mm HR (steel) 1 mm HR (alu) 97 SCS Accessories Torque wrench Box Nut for torque wrench - 0 Nm (for SCS ) Part no. HR Nm (for SCS 1) Part no. HR SW 12, /8 (for SCS ) Part no. HR SW, 1/2 (for SCS 1) Part no. HR Workpiece stop for fixing on both sides of the base or on the jaws Part no. HR Part no. HR for SCS for SCS 1 Set of clamping claws ( pcs.) with fastening screws M10x DIN 912 pcs. (for SCS ) Part no. HR pcs. (for SCS 1) Part no. HR Set of double clamping claws (2 pcs.) with fastening screws M10x DIN 912 (2 pcs.) for SCS Part no. HR ( pcs.) for SCS 1 Part no. HR Set of positioning pins consisting of one cylindrical and one milled positioning pin (for SCS /1) Pin diameter 12 mm (m) Part no. HR Set of keyblocks (2 pcs.) for longitudinal adjustment, for reference slot /18 mm (for SCS /1) Slot width mm Part no. HR Slot width 18 mm Part no. HR Set of keyblocks for T-slots ( pcs.) for clamping on machine beds for slot /18 mm (for SCS /1) Slot width mm Part no. HR Slot width 18 mm Part no. HR
8 BOCK WORKHOLDING 18 RD AVENUE P.O. BOX 91 FORD CITY, PA 122 TOLL FREE: PH: FAX: ONE system / MANY solutions
5-axis clamping system compact
5-axis clamping system compact 395 5-axis clamping system compact Function We are setting standards with the new KIPP 5-axis clamping system compact in this field. The system was specifically designed
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationIDEAL FOR 5-AXIS MACHINING
IDEAL FOR 5-AXIS MACHINING Without additional foundations or special jaws, the RZM centric vice holds the workpiece securely and does this with a minimal interference contour. The clamping spindle is located
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More informationUniversal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More and more companies are investing
More information2014 / Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining
21 / 215 Vischer & Bolli Machining and workholding Universal 5 Axis Vise Positive high strength clamping close to the work-piece Obstruction free 5-axis machining Obstruction free 5-side machining More
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationPull-down clamps. No Low height clamping jaws, model Bulle
Pull-down clamps The wedge action of clamping jaws is the characteristic feature of these pull down clamps. It causes the pull down effect, which presses the workpiece against both, stop and machine table.
More informationNEW RÖHM VICE NOVELTIES. RKE-M and RZM (size 92)
NEW RÖHM VICE NOVELTIES RKE-M and RZM (size 92) NC-COMPACT-VICE RKE-M MANUALLY OPERATED APPLICATION Particularly suitable for use on machining centers and palletisers. TYPE Clamping system mechanical without
More informationWM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
More informationWM / Zero point mounting system SPEEDY metec
WM-020-294 / 04.2008 Zero point mounting system SPEEDY metec 2 Informations SPEEDY metec 1 / 2 / 3 Content and overview of order no. SPEEDY metec 1 Page Order no. SPEEDY metec 1 4 2000 001 Insertion nipple
More informationModular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationOPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES
OPERATING INSTRUCTIONS 5-AXIS CLAMPING SYSTEM + ACCESSORIES 1 Contents 1. Introduction 2. Safety instructions and precautions 3 Operating the clamp 3.1 Clamp set up 3.2 Sequence for clamp set up 3.3 Adjusting
More informationWorkholding Systems Double clamping system DF
Workholding Systems Double clamping system DF 05/2014 3.3420 Flexible double clamping system DF, mechanical-hydraulic and hydraulic Your benefits at a glance: Double machining Series arrangement Individual
More information5-Axis Machine Tools from SMW-AUTOBLOK
-Axis Machine Tools from SMW-AUTOBLOK -Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use Jaws with SinterGrip clamping inserts for clamping of workpieces with lowest depth
More informationMachine vices RB and RH
Overview Machine vices RB and RH For high clamping accuracy Special technical features of the RÖHM Machine vices RB and RH: Steel body with stationary jaw, drop forged or body made from spherical graphite
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationPrecision Milling Machine Vises. (Inch) (Inch) (Inch) Toolmaker s Vises. Jaw Depth
Precision Milling Machine Vises Vises & Accessories A B C D E F G H I J K L M N 17.01 4.63 9.25 6 2.05 18.74 3.87 2.87 1.50 1.75 4.84 0.69 7.5 0.71 79 277064 17.20 4.63 8.75 6 2.05 18.94 3.87 2.87 1.50
More informationCAM SYSTEM. Eccentric self-locking clamping devices. Set. CAM SYSTEM t. CAM SYSTEM t. Set. CAM SYSTEM s pag CAM SYSTEM s pag.
Eccentric self-locking CAM SYSEM Set CAM SYSEM t pag. 12 CAM SYSEM t pag. 126 Set CAM SYSEM s pag. 127 CAM SYSEM s pag. 128 EDGE CLAMP pag. 130 123 CAM-SYSEM eccentric self-locking he CAM SYSEM has been
More information5-AXIS CLAMPING SYSTEM + ACCESSORIES
5-AXIS CLAMPING SYSTEM + ACCESSORIES CONTENTS Visual Directory P. 10 Jaw Vices P. 11 27 GERMANY norelem Normelemente KG Volmarstraße 1 71706 Markgröningen Tel. +49 7145 206-41 Fax. +49 7145 206-66 info@norelem.de
More informationChapter 22: Turning and Boring Processes. DeGarmo s Materials and Processes in Manufacturing
Chapter 22: Turning and Boring Processes DeGarmo s Materials and Processes in Manufacturing 22.1 Introduction Turning is the process of machining external cylindrical and conical surfaces. Boring is a
More informationSTAMPING TECHNOLOGY - CLAMPING RAW PARTS
simple. gripping. future. 5-Axis 66 Makro Grip Stamping Unit 72 Stamping Unit for the workbench 73 Stamping Unit on trolley 76 Stamping Unit Accessories 77 Stamping Jaws 78 Makro Grip 5-Axis-Vices 82 5-Axis
More informationT-Slot Clamps Rotagrip Ltd Tel Website
T-Slot Clamps 12150 Body: heat treated steel. Clamp: brass. Packed in pairs. For use in T-slots of machine tables. For replacement clamping screws see 12112. Hex. key not included. Order No. Slot size
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel Tradition and modernity A strong company, a strong group We have been at home
More informationPRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
More informationWorkholding systems / Machine vices
Program summary Workholding systems / Machine vices Flexible workholding systems 5-axis machining Double and multiple workholding systems Tower workholding systems Concentric workholding systems Automation
More informationTechnical features. Positive Taper Lock System for manual tool clamping. Technical features:
clamping set Technical features The RÖHM- was specially designed for the positive taper lock clamping taking particulary into account the necessity of manual clamping. Technical features: strong design
More information50, ,000 18,800 8,000. CODE 04 ER (ER ) UPC Chuck/W ITS Central Chuck. CODE 04 ER (ER ) UPC Pallet For Alignment
CODE 04 ER-007826 (ER-017777) UPC Pallet For Alignment CODE 04 ER-007823 (ER-016092) UPC Chuck/W ITS Central Chuck Application To align angular position and to determine the center of UPC chucks. Please
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationMC-CVR-1. Király Trading KFT H-1151 Budapest Mogyoród útja
MC-CVR-1 Király Trading KFT H-11 Budapest Mogyoród útja -14 E-mail:_agi@kiralytrading.hu carver clamp Series Applications C-Style Carver Clamps A djustment screw is shielded and out of the work area Ideal
More informationClamping bolts Eccentrical cams clamping units
2.3 Shaft Clamping bolts Eccentrical cams clamping units 2.9 2.8 2.7 2.6 2.5 2.4 2.3 2.2 2.1 2.3 Clamping bolts, Eccentrical cams, Shaft clamping units Page 641 2.3 Clamping bolts, Eccentrical cams, Shaft
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 3" versatile for many applications for
More informationPrecision Grinding and Control Vise. Vises PSS. Tools and Accessories. For more Information current prices, please
PSK 50 shown incl. pull-down feature Vises Precision Grinding and Control Vise high precision, robust structure, hardened and ground v-grooves, high holding capacity can be used on 4 different sides face
More informationFORM HOLDING CLAMPS 8. 1 FORM HOLDING CLAMPS JAWS MOUNTING-ON-LATHE ADAPTERS. FORM HOLDING CLAMPS Wedge Style/Round
pag..4 JAWS pag..6 MOUNTING-ON-LATHE ADAPTERS pag..7 Wedge Style/Round pag.. Wedge Style/Square pag..10 pag..12 JAWS for external Form Holding pag..14 JAWS for internal Form Holding pag..16 TAPERED SCREWS
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel A strong company, a strong group Kesel Managing Director Martin K. Klug The people
More informationWF WF Tool Milling Machines. Milling Machines for Die Making with digital position indicator.
Tool Milling Machines Milling Machines for Die Making with digital position indicator automatic feeds on all 3 axes vertical head quill for drilling quill stroke 80 mm versatile for many applications for
More informationCarvLock HDLM6 Manual Machinable Jaw Vise
CarvLock HDLM6 Manual Machinable Jaw Vise Instructions KURT MANUFACTURING INDUSTRIAL PRODUCTS DIVISION 1325 QUINCY STREET NE MINNEAPOLIS, MN. 55413 TOLL FREE: (800) 328-2565 TEL: (763) 572-4424 FAX: (612)
More informationFirst B2B eshop of the clamping technology industry
VICES 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function The first
More informationAlufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition
ALUFIX BASIC SETS 2 ALUFIX BASIC-SETS Alufix Basic Sets offer a variety of application possibilities based on the quantity of components (from 19 to over 440) and their composition ALUFIX BASIC-SETS Note:
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationWORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
More informationOperating Manual Axis 60mm Self Centering Vise Axis 100mm Self Centering Vise
Operating Manual Including installation and assembly instructions 80000 5-Axis 60mm Self Centering Vise 80100 5-Axis 100mm Self Centering Vise 80300 5-Axis 40mm Fixed Jaw Vise 80400 5-Axis 60mm Fixed Jaw
More informationClamping devices - mechanical
Zero point reference also on down draw clamps A fixed zero point reference on down draw clamps is self-evident in the STARK zero point mounting system. This zero point reference on down draw clamps is
More informationCOMPLETE CATALOGUE 2017 QUALITY CREATES TRUST
COMPLETE CATALOGUE 2017 QUALITY CREATES TRUST 2 ALLMATIC PRODUCT FINDER THE FAST WAY TO THE RIGHT PRODUCT! Do you want 24/7 support? No problem! Our product finder is available to you around the clock
More informationVISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES
CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING
More informationSTEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
More informationDimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding
Info Dimensions of the machine spindle heads in accordance with DIN The latest issue of the DIN sheet is binding DIN 55026 from taper size 4 with driver. Spindle head Size C1 C2 D hole count outer olt
More informationvario drive turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker
turn TU 1503V The new compact lathe with electronically adjustable speed. Perfect for the model maker DC motor Ribbed prism bed made of grey cast iron, inductively hardened and ground Hardened and ground
More informationTurning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationLathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY
TURNING MACHINES LATHE Introduction Lathe is a machine, which removes the metal from a piece of work to the required shape & size HENRY MAUDSLAY - 1797 Types of Lathe Engine Lathe The most common form
More informationTurning and Related Operations
Turning and Related Operations Turning is widely used for machining external cylindrical and conical surfaces. The workpiece rotates and a longitudinally fed single point cutting tool does the cutting.
More informationTable of contents VICES
Table of contents VICES NC-Compact vices RKK with SA / SGN jaws 4010 Accessories RKK 4012 RKE 4016 Accessories RKE 4018 Special Accessories RKK / RKE 4020 RKE-L 4022 Accessories RKE-L 4024 RKG-L 4028 Accessories
More informationNEW DURO-TA XT KEY BAR CHUCK. The flexible lightweight for large and small workpieces
NEW DURO-TA XT KEY BAR CHUCK The flexible lightweight for large and small workpieces DURO-TA XT KEY BAR CHUCK To meet the requirements of turning and milling machines for flexibility, workpiece accessibility
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationPZS. Precision vices. Precision vices PZS
Simple clamping and releasing with the inner hexagon key. Type 735-60 PL-S micro with quick adjustment Item no. Size Squareness Parallelism Jaw G H J Work locator 1179514 1 0,005 0,002 34 25 15 75 20 20
More informationpowerful. Vices 2013/2014
powerful. Vices 2013/2014 www.roehm.biz VICES NC-Compact vices Basic - RKE NEW 4010 Accessories RKE 4012 Special accessories RKE/RKK 4014 Short - RKE-LV 4018 Accessories RKE-LV 4020 Short - RKE-M LV 4022
More information. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding.
Clamping technology. Dimensions of the Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding. DIN 55026 Taper sizes 4 and above with drive tang. Spindle
More informationLathes. CADD SPHERE Place for innovation Introduction
Lathes Introduction Lathe is one of the most versatile and widely used machine tools all over the world. It is commonly known as the mother of all other machine tool. The main function of a lathe is to
More informationHOW TO WORK WITH HERMANN SCHMIDT
HOW TO WORK WITH HERMANN SCHMIDT Visit HSCHMIDT.COM Find in-depth product details and resources. View large library of configuration examples. Order products online: Pay by credit card. Terms customers
More informationNew Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
More informationLOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
More informationVice novelties Clamping technology for NC machining. driven by technology
Vice novelties Clamping technology for NC machining http://www.roehm.biz/schraubstockneuheiten driven by technology RKE NC-Compact vices The new NC-compact vice RKE: optimized design with proven quality.
More informationMACHINING CENTER EC43 5 Axes with Pallet Loader
Meccaniche Arrigo Pecchioli Via di Scandicci 221-50143 Firenze (Italy) - Tel. (+39) 055 70 07 1 - Fax (+39) 055 700 623 e-mail: pear@pear.it - www.pear.it Other files available for additional information
More informationIN 578. Tools Required. Torque Specification: 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench.
Tools Required 2011-C Ford F250/F350 No Drilling into Vehicle is Required 10mm Socket 7/16 Socket 1/2 Socket 1/2 Wrench 7/16 Wrench 1/8 Allen Wrench FL277 x 1 Torque Specification: 1/4 Bolts - 6 Ft Lbs.
More informationSave Set-up Time... and More!
System Bock Save Set-up Time... and More! Bock Locator Plates The foundation for quick change workholding efficiency. The Bock Locator Plate is a hard coated aluminium subplate with precision bored and
More informationEnsat driving tools...
nsat driving tools... On this page, you can configure the optimum tool for your application. A configuration is provided in the following as an illustrative example. The article number is composed of two
More informationLathe. A Lathe. Photo by Curt Newton
Lathe Photo by Curt Newton A Lathe Labeled Photograph Description Choosing a Cutting Tool Installing a Cutting Tool Positioning the Tool Feed, Speed, and Depth of Cut Turning Facing Parting Drilling Boring
More informationinnovations 2013 More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System
innovations 2013 CLAMPING. SCREWING. LOCKING. More than 100 innovations in the fields of: - Cassette buffer magazines - Zero-Point Clamping Systems - Hydraulic Clamping System - Grippers - and much more...
More informationCompatibility overview of accessories for milling machines
Compatibility overview of accessories for milling machines Accessories Item No. BF16 BF20/L MB4 F40E BF30 MT3 BF30 ISo30 BF46 ISO40 BF46 MT4 MF1 MT 50 MT2BV MF2 MF4 MT100 MT 200 MT 8 MX 3 MX 4 MT8 Copy
More information. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding
ß Clamping tools. Dimensions of Machine Spindle Heads in Compliance with DIN The most recent editions of the DIN standards are binding DIN 5506 Taper sizes 4 and above with driver. Spindle No. of holes
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationTCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES
TCF 160 / TCF 200 / TCF 224 / TCF 250 TCF 275 / TCF 300 HEAVY CENTRE LATHES BASIC PARAMETERS 3-guideways bed Max. torque on spindle Nm Max. weight of workpiece between centre 30 tonnes Turning length 3,000
More informationVHF 2 VHF 2. Vertical Milling Machine
Vertical Milling Machine VHF - ideal series for mechanic workshops, training, single part and replacement part manufacturing, and prototyping including 3-axis position indicator travel x-axis 600 mm y-axis
More informationWM en. Zero point clamping system system 3000
Zero point clamping system system 3000 unique push-on very strong automatic monitoring flush mounted SPEEDY and spigot handling without interfering contour 50kN retention force suitable for automation
More informationw w w. h d o n l i n e s h o p. d e AUTOMATIC COMPRESSION RELEASE TOOL GENERAL INSTALLATION -J04654 REV Kit Number Models
-J05 REV. 008-0- GENERAL Kit Number 98-08 Models AUTOMATIC COMPRESSION RELEASE TOOL For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationStandard CATALOGUE 2018
Standard Clamping Elements CATALOGUE 2018 Company history 1890 Company founded as a lock manufacturer by Andreas Maier. 1920 Product range extended to include spanners. 1928 Production line assembly of
More informationPRODUC TION VISES. Vises. 5-Axis Production Vises
Introduction to Design...104 105 VMC/HMC Solutions...106 107 Ball Lock Mounting System...108 109 Production Vises 4" (100 mm) Production Vises...110 112 6" (150 mm) Production Vises...113 115 Short 6"
More informationMACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
More informationTUR 6MN WITH LOADING CRANES. TUR 4MN 3000 x
TUR 4MN 3000 x 22 000 TUR 6MN WITH LOADING CRANES This lathe, produced for American client, has a unique bed configuration. It consists of two independent beds mounted on a special foundation. This solution
More informationTOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2017 NEW RÖHM eshop First B2B eshop of the clamping technology industry Buy RÖHM products online 24/7 Order as a guest customer without registration Intuitive search and filter function
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been a leading manufacturer of state-of-the
More informationExcellent Clamping. Mechanical Clamping Devices
Excellent Clamping Mechanical Clamping Devices Precise Mechanical Clamping Devices for All Requirements Experience in clamping technology For decades, König-mtm has been one of the leading manufacturers
More informationFixed Headstock Type CNC Automatic Lathe
Fixed Headstock Type CNC Automatic Lathe MSY The BNE series is renowned for its high rigidity, heavy cutting capability and outstanding precision. The new MSY model extends the ability of the BNE series
More informationTechnical Data gripos ISO 9001
Technical ata gripos M-CERTIFICATE ISO 9001 NV N O. 7009 2 6 7 1 3 4 5 NC-uick Action Vices gripos The NC-uick action vices gripos were developed to provide the solution to practically every clamping problem
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationUniversal Machining Chucks. 4-Jaw Vertical
Universal Machining Chucks 4-Jaw Vertical Parts are gripped firmly by the formed jaws, ensuring high precision (deviation within 0.03mm) Large workpieces can be held tight with the low profile vise body
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More informationLOW PROFILE CLAMPING. Jergens OK-Vise. Micro Clamps
Jergens OK-Vise Serrated and Smooth Jaws...296 Machinable Jaw... 297 Mounting Jaw... 298 Self-Adjustable...299 Pull-Down... 300 301 Economy... 302 Low Profile Comparison Chart... 303 Multi-Rail RM System...
More informationPF 3000 Face Milling Cutter
Perfection in machining PF 3000 Face Milling Cutter UHRIN YOUR WORLD-WIDE PARTNER ADVANTAES axially adjustable inserts standard tool Ø 63 250 available ex-stock reduced spindle loading thanks to light
More informationFastening Technology. The Strong
100 The Strong Fastening Technology A few years ago connecting without drilling, milling or welding was almost unthinkable. It is obvious that if you can eliminate machining or welding from the process
More informationHAND TOOLS TWEEZERS. vice - DRILL PRESS
Torque Wrenches & Inserts Clicking torque wrench with mount for interchangeable socket tools, rapid accurate setting using QuickSelect quick-action adjuster, with Quick Release safety lock, double stop
More informationDouble Locating Fixed Vise w/.500 locating holes. Adjustable Vise w/.500 locating holes
VISES VISES EZE-VISE TM MODULAR SETUPS Low profile, low cost modular vise set incorporates features found in higher priced products: positive location in 3-axes, raised locator surface to facilitate drilling
More informationPrecision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.
PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.
More informationThe Ensat self-tapping threaded
The nsat self-tapping threaded insert nsat is a self-tapping threaded insert with external and internal threads,cutting slots or cutting bores. A continuous process of further development has brought about
More informationN/C LATHE TOOLING F F
ATHE TOOING ATHE TOOING Collet Chuck System MEGA MICRO CHUCK PAT. Clamping diameter: ø0. - ø6.05 Smaller nut diameter than the body enables installation from the back of the toolholders in small lathes
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More information