High Precision Diaphragm Chucks
|
|
|
- Angel Shelton
- 5 years ago
- Views:
Transcription
1 Precision Workholding Technology High Precision Diaphragm Chucks
2 Unique Diaphragm Chuck Design MicroCentric Improving the quality and efficiency of secondary machining operations.... through high workpiece concentricity, and reliable chuck performance. For thirty years MicroCentric has supplied innovative chucking products to the metalworking industry according to this principle. The MBS high precision Diaphragm Chucks are the latest advance of MicroCentric's workholding technology. MBS chucks are available in both self-contained and draw tube operated designs. All models are double acting, meaning they are capable of both OD and ID clamping, and are available for rotating and stationary applications. The MBS Concept.... The diaphragm of the MBS chuck, without an applied force, is in a neutral position. When a force is applied by either the internal piston, or the draw tube, the diaphragm is expanded or contracted. A force in the +Z axis opens the chuck. A force applied in the -Z axis closes the chuck, or clamps the workpiece in an OD chucking application. MBS Chucks do not rely solely on the spring force of the diaphragm to generate clamping force on the workpiece. Additionally, MBS chucks feature a greater jaw stroke than conventional diaphragm chucks due to the unique MBS diaphragm design that incorporates two pivot points. The MBS design provides load clearance up to.060" (1.5mm). MBS Chuck Features.... Accuracy to.0001" (0.005mm) TIR Pull back clamping against fixed part stop Low maintenance (MBS chucks do not require lubrication, and have no moving parts to wear out or become contaminated by chips and swarf) Large jaw opening for maximum load clearance High speed capability up to 10,000 rpm Variable clamping force makes MBS chucks ideal for both roughing and finishing operations 6 jaw design enables MBS chucks to clamp fragile workpieces with minimal distortion Clamping force can be varied during the machining cycle to maintain consistent grip on the workpiece Hi-Lo clamping capability Tooled Diaphragm Assembly (with top jaws and part locator) is designed to be removed and accurately remounted to chuck body to maintain.0004" (0.01mm) TIR runout 1
3 Table of Contents MBS-L Air Operated Rotating Chucks - page 3 MBS-L models are a self-contained design with built-in air cylinder for rotating applications. Air is supplied to MBS/L chucks by a rotating air tube assembly mounted inside the machine spindle. MBS/L chucks are available in sizes from 3 to 12 inch diameter. MBS-Z Draw Tube Actuated Chucks - page 5 MBS/Z models are actuated by either a hydraulic or pneumatic cylinder mounted to the rear of the machine spindle. MBS/Z chucks are a modular design that includes a spindle adapter and threaded draw tube connector. MBS/Z chucks are available in sizes from 4 to 12 inch diameter. MBS-N Air Operated Stationary Chucks - page 7 MBS/N models are a self-contained design with built-in air cylinder for stationary applications. Air is supplied directly to the side of the chuck body. MBS/N chucks are available in sizes from 3 to 12 inch diameter. Diaphragms & Stop Spiders - page 9 Blank Top Jaws - page 10 MMR Diaphragms are a 6 jaw design. 2, 3, and 4 jaw configurations are available on request. ASS Stop Spinders are mounted to the face of the diaphragm and are used to mount part stop to locate the workpiece being clamped. Blank top jaws are available from stock in 6 jaw configurations. Other configurations are available on request. MBS Chuck Accessories - page 11 Rotating air tube assemblies and air controls are available to operate MBS/L and MBS/N chuck models
4 MBS/L Air Operated Diaphragm Chucks Design Self-contained design with built-in air cylinder. Air is supplied to the chuck by a multi passage air tube assembly with a rotary coupling. Coolant through the spindle capability is standard. Application OD and ID chucking for cylindrical grinding, turning, and hard turning. Ideal for workpieces requiring high concentricity, and/or close roundness. Ideal for fragile parts which are easily distorted, and applications requiring high spindle speeds. Chuck Specifications Chuck Model Chuck Size Repeating Accuracy No. of Jaws Jaw Stroke* Max. Jaw Force Max. Air Pressure Max. rpm** Weight*** MBS/L ".0001" 6.060" 510 lbf 100 psi 8, lb 80 mm.0025 mm mm 232 kgf 7.1 kg/cm2 8, kg MBS/L ".0001" 6.060" 1,560 lbf 100 psi 7, lb 102 mm.0025 mm mm 709 kgf 7.1 kg/cm2 7, kg MBS/L ".0001" 6.060" 3,640 lbf 100 psi 6, lb 127 mm.0025 mm mm 1,655 kgf 7.1 kg/cm2 6, kg MBS/L ".0001" 6.060" 6,090 lbf 100 psi 6, lb 152 mm.0025 mm mm 2,768 kgf 7.1 kg/cm2 6, kg MBS/L ".0001" 6.060" 10,950 lbf 100 psi 4, lb 204 mm.0025 mm mm 4,977 kgf 7.1 kg/cm2 4, kg MBS/L ".0001" 6.080" 17,090 lbf 100 psi 3, lb 254 mm.0025 mm 6 2 mm 7,768 kgf 7.1 kg/cm2 3, kg MBS/L ".0001" 6.080" 27,470 lbf 100 psi 3, lb 294 mm.0025 mm 6 2 mm 12,486 kgf 7.1 kg/cm2 3, kg * Jaw stroke on diameter with 1.50" high top jaws ** Max. rpm is influenced by air pressure applied and weight of top jaws *** Without top jaws 3
5 Chuck Dimensions Model No. A B C D E F G H J MBS/L " 2.000".750".51".060" 1.77" 3.50" 2.750" M5 81 mm 50.8 mm 19 mm 13 mm 1.5 mm 45 mm 88.9 mm 69.9 mm M5 MBS/L " 3.249".750".50".060" 2.21" 4.33" 3.500" M mm 82.5 mm 19 mm 12.7 mm 1.5 mm 56.1 mm 110 mm 88.9 mm M5 MBS/L " 3.937".750".34".120" 2.28" 5.35" 4.409" M6 127 mm 100 mm 19 mm 8.6 mm 3 mm 57.9 mm mm 112 mm M6 MBS/L " 4.920".750".46".120" 2.19" 6.38" 5.350" M6 152 mm 125 mm 19 mm 11.7 mm 3 mm 55.6 mm mm mm M6 MBS/L " 6.600" 1.187".43".125" 2.48" 8.43" 7.200" M mm mm 30 mm 10.9 mm 3.2 mm 63 mm mm mm M10 MBS/L " 8.500" 1.187".28".185" 3.54" 9.21" 9.200" M mm mm 30 mm 7.1 mm 4.7 mm 90 mm 234 mm mm M10 MBS/L " 9.758" 1.187" -.185" 3.66" 12.05" " M mm mm 30 mm mm 93 mm 306 mm mm M
6 MBS/Z Draw Bar Operated Diaphragm Chucks Design Draw tube operated design. Can be actuated with either a hydraulic or pneumatic cylinder mounted at the rear of the machine spindle. Application OD and ID chucking for cylindrical grinding, turning, and hard turning. Ideal for workpieces requiring high concentricity, and applications requiring high chucking force and/or high spindle speeds. Chuck Specifications Chuck Model Chuck Size Repeating Accuracy No. of Jaws Jaw Stroke* Max. Jaw Force Max. Draw Max. Tube Force rpm** Weight*** MBS/Z-100 4".0001" 6.060" 8,665 lbf 3,950 lbf 7, lb 102mm.0025mm 6 1.5mm 2,940 kgf 1,795 kgf 3.1 kg MBS/Z-125 5".0001" 6.060" 11,420 lbf 3,950 lbf 6, lb 127mm.0025mm 6 1.5mm 5,190 kgf 1,795 kgf 4.8 kg MBS/Z-150 6".0001" 6.060" 12,210 lbf 3,950 lbf 6, lb 152mm.0025mm 6 1.5mm 5,550 kgf 1,795 kgf 6.6 kg MBS/Z-200 8".0001" 6.060" 15,595 lbf 4,550 lbf 4, lb 204mm.0025mm 6 1.5mm 7,090 kgf 2,070 kgf 13.0 kg MBS/Z ".0001" 6.080" 38,075 lbf 11,200 lbf 4, lb 254mm.0025mm 6 2.0mm 17,300 kfg 5,090 kgf 27.7 kg MBS/Z ".0001" 6.080" 43,110 lbf 11,200 lbf 3, lb 294mm.0025mm 6 2.0mm 19,600 kgf 5,090 kgf 49.7 kg * Jaw stroke on diameter with 1.50" high top jaws ** Max. rpm is influenced by draw tube force and weight of top jaws ***Weight without top jaws ***Other mounting configurations available upon request 5
7 Chuck Dimensions Model No. A B**** C D F G H J MBS/Z " A2-4 M16.314" 2.36" 4.33" 3.500" M mm A2-4 M16 8.0mm 60mm 110mm 88.9mm M5 MBS/Z " A2-4 M " 2.32" 5.35" 4.409" M6 127mm A2-4 M16-3.2mm 58.9mm 135.9mm 112mm M6 MBS/Z " A2-5 M " 2.21" 6.38" 5.350" M6 152mm A2-5 M mm 56.1mm 162.1mm 135.9mm M6 MBS/Z " A2-6 M16.284" 2.46" 8.43" 7.200" M10 204mm A2-6 M16 7.2mm 62.4mm 214.1mm 182.9mm M10 MBS/Z " A2-8 M20.354" 3.34" 10.39" 9.200" M10 254mm A2-8 M20 9.0mm 84.8mm 263.9mm 233.7mm M10 MBS/Z " A2-11 M20.829" 4.17" 12.05" " M mm A2-11 M mm 105.9mm 306mm 266.7mm M
8 MBS/N Stationary Diaphragm Chucks Design Self-contained design with built-in air cylinder. Air ports are located on the side of the chuck body for stationary use. Application OD and ID chucking for milling, drilling, inspection, or any other nonrotating application requiring high concentricity and/or close workpiece roundness. The inherent spring characteristic of the diaphragm allows workpieces to be clamped without continuous air supply for pallet and tombstone applications. Chuck Specifications Chuck Chuck Repeating No. of Jaw Max. Max. Air Weight** Model Size Accuracy Jaws Stroke* Jaw Force Pressure MBS/N ".0001" 6.060" 510 lbf 100 psi 3.3 lb 80mm.0025mm 6 1.5mm 232 kgf 7.1 kg/cm kg MBS/N ".0001" 6.060" 1,560 lbf 100 psi 6.5 lb 102mm.0025mm 6 1.5mm 709 kgf 7.1 kg/cm kg MBS/N-125 5".0001" 6.060" 3,640 lbf 100 psi 10.4 lb 127mm.0025mm 6 1.5mm 1,655 kgf 7.1 kg/cm kg MBS/N ".0001" 6.060" 6,090 lbf 100 psi 14.3 lb 152mm.0025mm 6 1.5mm 2,768 kgf 7.1 kg/cm kg MBS/N ".0001" 6.060" 10,950 lbf 100 psi 29.1 lb 204mm.0025mm 6 1.5mm 4,977 kgf 7.1 kg/cm kg MBS/N ".0001" 6.080" 17,090 lbf 100 psi 64.5 lb 254mm.0025mm 6 2.0mm 7,768 kgf 7.1 kg/cm kg MBS/N ".0001" 6.080" 27,470 lbf 100 psi 96.1 lb 294mm.0025mm 6 2.0mm 12,486 kgf 7.1 kg/cm kg * Jaw stroke on diameter with 1.50" high top jaws ** Without top jaws 7
9 Chuck Dimensions Model No. A B E F G H J MBS/N " 2.000".060" 1.77" 3.50" 2.750" M5 81mm mm 44.9mm 88.9mm 69.8mm M5 MBS/N " 3.249".060" 2.21" 4.33" 3.500" M mm mm 56.1mm 110mm 88.9mm M5 MBS/N " 3.937".120" 2.28" 5.35" 4.409" M6 127mm 100mm 3.0mm 57.9mm 135.9mm 112mm M6 MBS/N " 4.920".120" 2.19" 6.38" 5.350" M6 182mm 125mm 3.0mm 55.6mm 162.1mm 135.9mm M6 MBS/N " 6.600".125" 2.48" 8.43" 7.200" M10 204mm 167.6mm 3.1mm 63mm 214.1mm 182.9mm M10 MBS/N " 8.500".185" 3.54" 9.21" 9.200" M10 254mm 215.9mm 4.7mm 90mm 234mm 233.7mm M10 MBS/N " 9.758".185" 3.66" 12.05" " M mm 247.8mm 4.7mm 93mm 306mm M
10 MMR Diaphragms MicroCentric Chuck Size Model No. No. Jaws Diameter Height 3" MMR ".63" 81mm 81mm 16mm 4" MMR ".71" 102mm 102.1mm 18mm 5" MMR ".71" 127mm 127mm 18mm 6" MMR ".70" 152mm 152mm 17.7mm 8" MMR ".69" 204mm 204mm 17.5mm 10" MMR ".87" 254mm 254mm 22mm 12" MMR " 1.02" 294mm 293.9mm 25.9mm MMR diaphragms are used with SMR series top jaws which are bolted on from the rear of the diaphragm. This eliminates the possibility of having an interrupted clamping diameter since there are no counterbored mounting holes in the top jaws. MMR diaphragms are also available in 2, 3, and 8 jaw configurations. ASS Part Stop Spider Chuck Size Model No. 3" (81mm) ASS-80 4" (102mm) ASS-100 5" (127mm) ASS-125 6" (152mm) ASS-150 8" (204mm) ASS " (254mm) ASS " (294mm) ASS-300 ASS part stop spiders are mounted to the face of the diaphragm, underneath the top jaws. They are machined for locating pins or other part stops to be mounted to the stop spider for end location of the workpiece. 9
11 SMR Blank Top Jaws MicroCentric Chuck Size Model No. Diameter Height Material Weight 3" SMR-80-25S 2.36" 1.00" lb 81mm 59.9mm 25.4mm.50 kg SMR-80-38S 2.36" 1.50" lb 59.9mm 38.1mm.72 kg 4" SMR S 3.15" 1.00" lb 102mm 80mm 25.4mm.86 kg SMR S 3.15" 1.50" lb 80mm 38.1mm 1.31 kg SMR S 3.15" 2.00" lb 80mm 50.8mm 1.72 k 5" SMR S 3.46" 1.00" lb 127mm 87.8mm 26.4mm 1.00 kg SMR S 3.46" 1.50" lb 87.8mm 38.1mm 1.54 kg SMR S 3.46" 2.00" lb 87.8mm 50.8mm 2.09 kg 6" SMR S 4.72" 1.00" lb 152mm 119.9mm 15.4mm 1.86 kg SMR S 4.72" 1.50" lb 119.8mm 38.1mm 2.81 kg SMR S 4.72" 2.00" lb 119.9mm 50.8mm 3.68 kg SMR S 4.72" 3.00" lb 119.9mm kg 8" SMR S 6.30" 1.50" lb 204mm 160mm 38.1mm 4.63 kg SMR S 6.30" 2.00" lb 160mm 50.8mm 6.18 kg SMR S 6.30" 3.00" lb 160mm kg 10" SMR S 7.48" 1.50" lb 254mm 190mm 50.8mm 6.54 kg SMR S 7.48" 2.00" lb 190mm 50.8mm 8.68 kg SMR S 7.48" 3.00" lb 190mm 76.2mm kg 12" SMR S 9.13" 1.50" lb 294mm 232mm 38.1mm 9.27 kg SMR S 9.13" 2.00" lb 232mm 50.8mm kg SMR S 9.13" 3.00" lb 232mm 76.2mm kg SMR blank top jaws are used with MMR diaphragms. They are machined on the chuck to suit the workpiece. Refer to MicroCentric's operating manual for detailed instructions on the design and preparation of finished top jaws. Blanks jaws can be hardened after rough machining, and then finish ground on the chuck. Blank jaws are available in other configurations and materials. Contact our sales department for information on custom hardened and ground top jaws
12 MBS Chuck Accessories Rotating Air Tubes MicroCentric Air tube assemblies are used with MBS/L chuck models. The rotary air coupling features a hardened steel journal and a maintenance free oil-lite bearing. Rotary air tubes include a blank support bushing, air hoses and fittings. Length to be specified when ordering. Contact our sales department for assistance in determining the correct length for your application. D LENGTH Air Tube Model 50 Model 82 Chucks used with: 80, 100, 125 & 150 models 250 and 300 models B C A F E Air Tube A B C D E F Max Speed Model " 1.24" 1.50" 2.21" 1/16"-27 NPT 5/8"-32 UNF 6,000 rpm 15.9mm 31.5mm 38.1mm 56.1mm Model " 2.50" 2.75" 4.85" 1/4"-18 NPT 1.0"-24 UNF 4,000 rpm 25.4mm 63.5mm 69.9mm 123.2mm 11
13 Operating Valves HV operating valves are three position manually operated pneumatic valves that direct air flow to open and close MicroCentric air chucks. Each HV valve includes air hoses and fittings required for installation. Model Fitting Size Max Pressure Air Tube Model HV-10 1/8"-27 NPT 150 psi Model kg/cm 2 HV-20 1/4"-18 NPT 150 psi Model kg/cm 2 Air Filter/Regulator/Lubricator Units The FRL-15 is a combination air filter/regulator/lubricator unit that controls the air pressure to the chuck's built-in cylinder, and provides lubrication to the rotary air bearing assembly. This unit also filters contaminants from the air supply. Water that accumulates in the filter unit can be purged by a manual drain. Each unit includes a pressure gage, as well as air hoses and fittings. Model Fitting Size Max Pressure FRL-15 1/4"-18 NPT 150 psi 10kg/cm 2 Rotary Union A rotary union is required to supply coolant through the air tube assembly, or for the AL-Automatic Lubrication option. The rotary union threads into the rear of the air tube and includes a hose and fittings. Model Fitting Size Max Pressure Max Speed Air Tube Model RU-10 1/8"-27 NPT 150 psi 6,000 rpm Model kg/cm 2 RU-20 1/4"-18 NPT 150 psi 4,000 rpm Model kg/cm
14 Spindle & Draw Tube Data Sheet Company Date Chuck Model Ref. No. MicroCentric Please complete this spindle data sheet and submit it with your order for MBS/Z chuck models. C A This information will enable us to furnish a spindle mounting plate and threaded draw tube connector with the chuck that is designed for your machine. D G H K J E F B Machine Make Machine Model Machine Serial No. A* taper size B mounting thread C length of pilot D through hole diameter E ID counterbore or taper (if any) F depth of counterbore (if any) G OD of draw tube H ID of draw tube J thread (RH or LH / ID or OD) K length of thread L** forward position M retracted position * For machines with a straight spindle pilot a detail drawing of the spindle must be submitted ** Positive (+) indicates draw tube is in front of the spindle face (as shown) Negative (-) indicates draw tube is behind the spindle face M (DRAW TUBE RETRACTED) L (DRAW TUBE FORWARD) 13
15 MicroCentric Corp 25 So. Terminal Drive, Plainview, NY USA Tel: Fax: MBS-10/03
High Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
Air precision chucks APC
Air precision chucks APC MicroCentric GmbH Berblingerstr. 16 71254 Ditzingen / Germany Tel.: +49 (0)7156 17819-0 Fax: +49 (0)7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS
COLLET CLOSERS, FIXTURES AND COLLETS FOR ROTATING AND FIXED APPLICATIONS ROYAL QUICK-GRIP MANUAL COLLET FIXTURES FOR 4TH AND 5TH AXIS APPLICATIONS q Unit is actuated via a hybrid mechanical/hydraulic mechanism.
PPC Series Precision Power Chucks
Precision Workholding Technology PPC Series Precision Power Chucks www.microcentric.com The World s Most Accurate Power Chuck Improve productivity and lower costs by enhancing workpiece quality...... through
CNC EXPANDING MANDRELS
CNC EXPANDING MANDRELS ID CLAMPING OFFERS FULL OD PART ACCESS PARALLEL EXPANSION FOR OPTIMUM ACCURACY AND GRIP FORCE LARGE RANGE IN STOCK FOR IMMEDIATE SHIPMENT ROYAL CNC EXPANDING MANDRELS Rigid and Accurate
Overview Grinding Applications
GRINDING 14E Overview Grinding Applications SRG Workpieces High precision grinding Steady Rests Grinding diameter Ø 20-85 mm Camshafts Crankshafts Shafts Chapter 1 Fine adjustment of the grinding center
Collet Closer & Tailstock Options
Collet Closer & Tailstock Options Fail-Safe Collet Closers Spring-close, air-to-open for fail-safe operation (85psi max) Part remains clamped even if loss of air should occur Non-adjustable grip force
Hardinge 5C Pneumatic Collet Block
Hardinge 5C Pneumatic Collet Block Installation Operating Instructions Maintenance Step Chuck 3 /16 T-Handle Wrench Chapman Wrench Collet ID Sure-Grip Expanding Collet Work Stop (4) Bolt Holes Shoulder
Complete O.D. Machining in One Operation
MFDODM209 Complete O.D. Machining in One Operation Including: Hydra-Drive For Extreme Accuracy CREATING INNOVATIONS IN FACE DRIVING TECHNOLOGY www.facedrivers.com Complete O.D. Machining in one Operation
ROYAL ULTRA-PRECISION ER COLLETS " TIR
ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece
Hardinge. The Hardinge Advantage. Hardinge Inc. One Hardinge Drive Elmira, NY USA. Worldwide Leader in Super-Precision
The Hardinge Advantage Worldwide Leader in Super-Precision Hardinge Inc. One Hardinge Drive Elmira, NY 14902-1507 USA Phone: 800-843-8801 Fax: 607-734-3886 Internet: www.hardinge.com Hardinge Inc., 1997
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because
BUCK PRODUCT CATALOG
PRODUCT CATALOG Table of Contents Technical Information. Why a BUCK?...3 Manual Chuck Selection...5 Spindle Identification for Mounting Plates...6 Obsolete Chuck Crossover...7 Parts Breakdown...8 ATSC
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
R8 COLLETS SERIES 333 : SUPERIOR IMPORT SERIES 330 : (Concentricity guaranteed to 0.000) Size 1/32** 1995502 1/16 1995104 7169005 3/32 1995106 7169010 1/8 1995108 7169012 5/32 1995110 7169015 3/16 1995112
Doler Self Colleting Machines*
* P2 Drill with Variable Spacing Foot Light and compact - yet rigid and rugged Modular design - for easy setup and servicing Variety of spindle speeds and terminations to satisfy a wide range of applications
PRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
NEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O
NEW HIGH-PRECISION TOOL GRIND CHUCK TGC P O HIGH-PRECISION TOOL GRIND CHUCK TGC P O Increase your productivity and lower your costs! Whenever high-performance tools are manufactured, there is a need for
OIL AND GAS. Clamping technology for crude oil and natural gas industries
OIL AND GAS Clamping technology for crude oil and natural gas industries CRUDE OIL AND NATURAL GAS - THE ENERGY OF TODAY RÖHM is the specialist for clamping technology with a wide product range, unrivaled
New Product Listing. Pages SET-TRU CHUCKS 2 Jaw with Soft Top jaws, 3 & 6 Jaw with Solid OD & ID Jaws, 4 Jaw with Two-piece Reversible
NUMERICAL INDEX PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. PARTIAL CODE NO. PAGE NO. 714... 9 718... 9 7202... 102 7203... 102 7205... 104 720... 107 7207... 104 7208... 104 7209... 107 7210...
Ph: Fax:
www.lexairinc.com Ph: 859-255-5001 Fax: 859-255-6656 Lexair is a privately held, American owned corporation committed to the design and manufacturing of industrial products. We are a World Class Manufacturer
P R O D U C T C A T A L O G.buckchuck.com www
P R O D U C T C A T A L O G www.buckchuck.com If a chuck s a chuck, then Why a Buck! Depth. In Experience. In Heritage. In Product. How about 75 years? That s how long Buck Chuck Company has engineered
MACHINE TOOL ACCESSORIES
VERTICAL 5-C COLLET VISE SERIES 344: VERTICAL 3-C COLLET VISE SERIES 344: : 2-1/2 x 7-3/4 Height: 4 Small movement of lever opens or closes collet. 2030000 CAM OPERATED 5-C HORIZONTAL/VERTICAL COLLET FIXTURE
Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan E
YEONG CHIN MACHINERY INDUSTRIES CO., LTD Headquarters : 888 Homu Road, Hsinchuang, Shengang, Taichung, Taiwan sales@ GENERAL TEL : 886-4-2562-3211 SERVICE TEL : 886-4-2561-2965 FAX : 886-4-2562-6479 FAX
N.A. Woodworth. Universal Ball-Lok (UBL) Chuck. The Original. Workholding Worldwide
N.A. Woodworth Workholding Worldwide The Original Universal Ball-Lok (UBL) Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL. It is The Original
MULTIPLE-PART WORKHOLDING SOLUTIONS EFFICIENCY COMES STANDARD
MULTIPLE-PART WORKHOLDING SOLUTIONS EFFICIENCY COMES STANDARD WORKHOLDING IS OUR PASSION P AWS Workholding has been providing clamping and fixturing solutions to the manufacturing community since the early
KTM-16/20 TECHNICAL DATA
TECHNICAL DATA Table Diameter : 1,600mm Max. Turning Diameter : 2,000mm Max. Turning Height : 1,750mm Table Indexing Degree : 0.001mm CNC Controller : FANUC 18i-TB ** Bed The bed has symmetrical structure
Jaw chuck B-Top3 STANDARD CHUCKS. 215 Variant. Jaw chuck B-Top3. Technical data. Size. B-Top3
STANDARD CHUCKS. Technical data A AJ DH AI AT AW T BQ AS Size 215 ariant B-Top3 Concentricity [mm] Max. clamping force [kn] Max. axial drawtube force [kn] RPM n max. [1/min.] Stroke per jaw [mm] Ø Capacity
.. 8. 2. 9. 22. 0.. 2.. 2. 2.... 28. 29.... 8. 9. PBL Universal Ball-Lock Power Castings or forgings can be.d. or I.D. clamped Grips on taper up to 0 Jaws pivot up to to grip on uneven surfaces Ideal for
Horizontal CNC 2 Axis Lathe
Horizontal CNC 2 Axis Lathe Model : KLR 20 Technical Catalog 1 Swing Over Bed 455mm 17.91 Swing Over Saddle 260mm 10.23 Maximum Turning Diameter 330mm 12.99 Maximum Turning Length 600mm 23.62 Standard
PATENT EP Compensating Chuck Retractable OVEKAV / OVARZV
PATENT EP1 190 815 Compensating Chuck Retractable OVEKAV / OVARZV COMPENSATING CHUCK - RETRACTABLE The OVEKAV / OVARZV retractable compensating chucks made by SwissChuck are unique! These chucking systems
COLLET FIXTURES, CHUCKS AND COLLETS FOR MACHINING CENTERS ROTARY TABLES MANUAL LATHES GRINDERS
OLLET FIXTURES, HUKS N OLLETS FOR MHINING ENTERS ROTRY TLES MNUL LTHES GRINERS ROYL QUIK-GRIP POWER-LOK HYRULI OLLET FIXTURES Extremely Fast ollet hanges hanging collets on a Royal Quick-Grip Power-lock
Lexair is a privately held, American owned corporation committed to the design and manufacturing of industrial products. We are a World Class
Lexair is a privately held, American owned corporation committed to the design and manufacturing of industrial products. We are a World Class Manufacturer of Fluid Power Products, Valves, and Machine Tool
bcprecision Devices, Inc. HYDRAULIC ARBORS AND CHUCKS
UNEQUALED WORK HOLDING ACCURACY for: grinding; balancing; inspection; boring; facing; reaming; drilling; turning; shaving; hobbing and honing b SQUARENESS r CONCENTRICITY f PARALLELISM e ROUNDNESS v ALIGNMENT
WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES
EUROPEAN PRECISION & QUALITY WORKHOLDING MADE IN EUROPE MANUAL LATHE CHUCKS, CENTERS, ROTATING BODIES OIL COUNTRY CHUCKS, POWER CHUCKS, VTL CHUCKS, ROTARY TABLE PACKAGES EUROPEAN PRECISION & QUALITY With
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
InTurn TAIL STOCK II
Specifications for the InTurn TAIL STOCK II accessory for the InTurn Indexing Turning 4 th axis The InTurn series is the only CNC mill accessory that provides both Indexing and coordinated 4 axis motion
Hardinge FlexC Collet System Style D 65mm
Hardinge FlexC Collet System Style D 65mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read
The Original UBL. N.A. Woodworth. Universal Ball-Lok Chuck SUPPORTED BY FORKARDT. Workholding Worldwide
The Original N.A. Woodworth Workholding Worldwide SUPPORTED BY FORKARDT UBL Universal Ball-Lok Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL.
HC Hydraulic Expansion Chucks
Technical Information HC Hydraulic Expansion Chucks design, function, effect, and application features, handling, and action application instructions precision tool length setting torques accessories sealed
PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING
PRODUCT OVERVIEW TOOLHOLDING AND WORKHOLDING Partner with Systematic Solutions Toolholding and Workhodling product range Toolholding Systems The TOTAL TOOLING program from SCHUNK: Precision toolholding
POWER CHUCKS. 3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center
3-Jaw Large Thru Hole 3-Jaw Extra Large Thru Hole 3-Jaw Closed Center TMX Power s DESIGNED AND ENGINEERED FOR PRECISION Featuring the quality and precision associated with European manufacturing, TMX Power
Horizontal CNC 3 Axis Livetool Lathe
Horizontal CNC 3 Axis Livetool Lathe Model : KLR 20M Technical Catalog 1 Swing Over Bed 455mm 17.91 Swing Over Saddle 260mm 10.23 Maximum Turning Diameter 268mm 10.50 Maximum Turning Length 600mm 23.62
PRODUC TION VISES. Vises. 5-Axis Production Vises
Introduction to Design...104 105 VMC/HMC Solutions...106 107 Ball Lock Mounting System...108 109 Production Vises 4" (100 mm) Production Vises...110 112 6" (150 mm) Production Vises...113 115 Short 6"
Power Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
QUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
InTurn Ultra and Ultra-T Indexing and Turning 4 th axis
Specifications for the InTurn Ultra and Ultra-T Indexing and Turning 4 th axis Industrial quality. 100% duty cycle. Production ready. The InTurn series is the only CNC mill accessory that provides both
QUICK-GRIP CNC COLLET CHUCKS
QUICK-GRIP CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP COLLETS WITH A 0.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY IN-STOCK FOR SAME-DAY SHIPPING ROYAL QUICK-GRIP
HOW TO WORK WITH HERMANN SCHMIDT
HOW TO WORK WITH HERMANN SCHMIDT Visit HSCHMIDT.COM Find in-depth product details and resources. View large library of configuration examples. Order products online: Pay by credit card. Terms customers
STEVENS SUBPLATES. STEVENS ENGINEERING, INC. TOLL-FREE WEB FAX
STEVENS SUBPLATES Spacing of hole patterns on Stevens accessories is identical to the pattern on Stevens Subplates. Insertion of the pull dowels thru bushed holes in the accessory into corresponding bushed
SAFETY PRECAUTIONS GENERAL INFORMATION
Form No. 102831 SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800)
CM6200 MILLING MACHINE
CM6200 MILLING MACHINE PORTABLE ON - SITE MACHINING SOLUTIONS FOR LARGE FLANGE MACHINING Quality Machine Design Provides Rigid, Power-Packed Performance Extraordinarily rigid design ensures consistent,
HANDHOLE SEAT GRINDER
1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
PATENT EP COMPENSATING CHUCKS OVEKA & KA
PATENT EP1 190 815 COMPENSATING CHUCKS OVEKA & KA COMPENSATING CHUCKS For centric cylindrical, orbital pin or form grinding of complex shaft-type components, the workpiece is generally ground between centers.
Hardinge FlexC Collet System Style D
Hardinge FlexC Collet System Style D Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly read this
FERROUS AND NON-FERROUS MATERIAL
Aluminum Cutting Small Material Large Material Brush Deburring Compound Angles In and Outside Deburring FERROUS AND NON-FERROUS MATERIAL MADE IN GERMANY H350 & H450 For production cutting of mild steel
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
Hardinge FlexC Dead-Length Collet System Style DL 42mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 42mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
ROYAL CNC COLLET CHUCKS
ROYAL CNC COLLET CHUCKS TEN-SECOND COLLET CHANGES 0.0002" TIR OR BETTER PARALLEL GRIP WITH A.062" RANGE MOST COMPACT CHUCKS IN THE INDUSTRY ROYAL QUICK-GRIP CNC COLLET CHUCKS The Most Advanced Collet Chucks
PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC
PRECISION IN BIG DIMENSIONS VERTICAL TURNING CENTRES VTC 2 3 MACHINES WITH GREAT DIMENSIONS AND MACHINING CAPACITY The VTC range has been designed to create new high standards of turning and machining
Shrink Fit System... Thermal Induction
Shrink Fit System... Thermal Induction process-controlled heating no overheating on the tool quick and accurate shrinking, on and off for tools with carbide or steel shanks slim design of the chucks through
Hardinge FlexC Dead-Length Collet System Style A. Installation Instructions and Parts Lists. FlexC Collet System Style A Instructions B-153
Hardinge FlexC Dead-Length Collet System Style A Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
Copyright 2009 Society of Manufacturing Engineers. FUNDAMENTALS OF TOOL DESIGN Fixture Design - DF
FUNDAMENTALS OF TOOL DESIGN Fixture Design - DF SCENE 1. DF26A, FTD87, 03:20:15:00-03:20:46:00 zoom out, milling operation DF26B, CGS: Milling Fixtures Lathe Fixtures Grinding Fixtures Broaching Fixtures
5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
VHF 3 VHF 3. Universal Milling Machine. Rigid Universal Milling Machine for drilling and milling, with large travels.
Universal Milling Machine Rigid Universal Milling Machine for drilling and milling, with large travels incl. 3-axis position indicator travel distances X axis 750 mm Y axis 280 mm Z axis 430 mm speed range
Hardinge FlexC Dead-Length Collet System Style DL 80mm. Installation Instructions and Parts Lists
Hardinge FlexC Dead-Length Collet System Style DL 80mm Installation Instructions and Parts Lists 1 General Safety Information Before installing the Hardinge FlexC Collet System on your machine tool, thoroughly
SPINDLE TOOLING FOR MANUAL & CNC LATHES
SPINDLE TOOLING FOR MANUAL & CNC LATHES TURNING MILLING GRINDING WORKHOLDING Pioneers of Spindle Tooling Quality and Process Control Value in Workholding Team up with the Hardinge Workholding Group to
Efficient workholding. Collet Chucks Mandrels Collets
TM Efficient workholding ollet hucks Mandrels ollets Index ollet huck Index of Klamp Products ollet hucks Q & Series Page 3 Quick hange ollet hucks QRL Series Page 4-7 Short Series ollet hucks RS Series
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES
PROTEM Tube and pipe beveling ID CLAMPING BEVELING MACHINES FOR TUBES, PIPES AND BOILER TUBES US-40 PRACTICAL TOOLS INC. P.O. Box 233 Aurora, ON L4G 3H3, Canada Phone: 905-727-0014 / 888-847-8880 Fax:
Turning and Lathe Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of lathe principles and be able to identify the basic tools and techniques
CLAMPING TECHNOLOGY SPECIAL SOLUTIONS
CLAMPING TECHNOLOGY SPECIAL SOLUTIONS BESPOKE SPECIAL SOLUTIONS You define the task and we develop and implement the solution! Special clamping chucks are tailor-made products. They are adapted to your
Right Angle Tools Accessories
Accessories for the No. 15 and 140 Series Right Angle Drills Bushing S125 Series S300 Series Thread Dim A Part No. Dim. A Part No..75-16 L.H. 5.3125 in. (135mm) 5.4375 in. (138mm) 5.4375 in. (138mm) 619143
WM en. Zero point clamping system SPEEDY airtec 1
SPEEDY airtec 1 GO! Maximum productivity Using the zero point clamping system SPEEDY classic you will increase your productivity to a maximum. Adjustment and checking processes are no longer necessary
High Performance Heavy Duty Lathe
High Performance Heavy Duty Lathe TC-46M series is the most powerful and rigid CNC lathe in its class. Designed with the latest technology and excellent equipment for highest material removal rate and
ALBRECHT PRECISION KEYLESS DRILL CHUCKS THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL CHUCKS
ALBRECHT PRECISION KEYLESS DRILL S THE WORLD'S MOST CONSISTENTLY ACCURATE DRILL S ALBRECHT The World's Most Consistently Accurate Drill Chucks For the past 00 years, Albrecht s line of precision drill
VISES VISES JAWS CENTERING CLAMP BASE PLATE COMPACT PNEUMATIC VISE PAIR OF CLAMPS PAIR OF POSITIONING KEYS PAIR OF POSITIONING KEYS VISES
CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING
SURE-GRIP EXPANDING COLLET SYSTEMS
SURE-GRIP EXPNDING COLLET SYSTEMS Turning Milling Grinding Workholding The Hardinge ID Gripping dvantage Years of experience in manufacturing standard expanding collets and special expanding systems brings
Hardinge FlexC Dead-Length Collet System Style A 80mm. Installation Instructions and Parts Lists. FlexC 80mm Collet System Style A Instructions B-170B
Hardinge FlexC Dead-Length Collet System Style 80mm Installation Instructions and Parts Lists 1 General Safety Information efore installing the Hardinge FlexC Collet System on your machine tool, thoroughly
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS
ACCESSORIES CATALOG BORING AND FACING HEADS LIVE CENTERS SKODA LIVE CENTERS SKODA & STM HEAVY DUTY LIVE CENTERS - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two
User Manual of JUNYI CKG32-S CNC Lathe
User Manual of JUNYI CKG32-S CNC Lathe Before installation and use, please read this Manual first. 1 Introduction Thanks for choosing JUNYI CNC Lathes. This manual book described JUNYI CKG32-S CNC lathe
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
5C EXPANDING COLLETS SERIES 2: Tel: 205884 / Fax: 20597 50 Huyler St / So. Hackensack, NJ 070 USA THREEJAW SELFCENTERING UNIVERSAL LATHE CHUCKS SERIES 995: Reversible 2 piece jaws except where noted 5C
Product Information. Deburring spindle FDB-AC
Product Information FDB-AC FDB-AC Compliant. Reliable. Flexible. FDB-AC deburring spindle Flexible deburring spindle for use in robotic applications Field of application Standard solution for flexible
Machine tooling technology. Zero point clamping system SPN THE KNOW-HOW FACTORY.
Machine tooling technology Zero point clamping system SPN THE KNOW-HOW FACTORY www.zimmer-group.com ORDER INFORMATION ZERO POINT CLAMPING SYSTEM SPN STRUCTURE OF THE ORDER NUMBER ORDER NUMBER SAMPLE SP
Operating Manual Axis 60mm Self Centering Vise Axis 100mm Self Centering Vise
Operating Manual Including installation and assembly instructions 80000 5-Axis 60mm Self Centering Vise 80100 5-Axis 100mm Self Centering Vise 80300 5-Axis 40mm Fixed Jaw Vise 80400 5-Axis 60mm Fixed Jaw
Modular clamping and positioning system for milling machines and machine tool. flexible
Modular clamping and positioning system for milling machines and machine tool flexible Titan 125 Everything under control The new Allmatic TITAN 125 high pressure vice combines virtually all the features
4. DOUBLE ECCENTRICS 5. WORM DRIVE SHAFT
Quality Manufacturing Processes 's GD5C2 has higher accuracy, more spindle clearance and more thrust and radial load. All rotary products are manufactured in Elmira, New York to strict specifications.
MACHINE TOOL PERFORMANCE ACCESSORIES
MACHINE TOOL PERFORMANCE ACCESSORIES 2017 Master Catalog Catalog No. 85030-17 SUPERCHARGE YOUR MACHINE TOOLS NEWEW NEWEW CNC Collet Chucks Pages 3 30 Unparalleled Quality & Accuracy Ten-Second Collet Changes
AUTOMATION ACCESSORIES
RG SERIES AUTOMATION ACCESSORIES The Vision System Faster than contact probes, the ultra-highspeed vision system gives integrated, closed loop control of the machine using the image from the camera. The
MACHINE TOOL ACCESSORIES
5c expanding collets series 2: MACHINE SHOP DISCOUNT SUPPLY THREEJaw SELFCENTERING universal LATHE s SERIES 995: Reversible 2 piece jaws except where noted 5c expanding collet SETS 4 Piece Set allows internal
Drilling and Tapping. A Buyers Guide.
Drilling and Tapping A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising
This just may be the Rotary Transfer machine you ve been waiting for.
This just may be the Rotary Transfer machine you ve been waiting for. A Machine Like No Other T he new Eclipse 12-100 is a ground-up redesign of the famous Hydromat concept with all new components. It
CNC MACHINE TOOLS MANUFACTURING 2017 S32 ATM.
CNC MACHINE TOOLS MANUFACTURING 2017 ATM 709 No.35 Keji 1st Road Tainan City,Taiwan, R.O.C Tel-No +886-6-3841155 Fax-No +886-6-3841177 http://www.quicktech.com.tw e-mail:inquiry@quicktech.com.tw 2017.11
World leader in live tools, angle heads, and multi-spindle drill heads
World leader in live tools, angle heads, and multi-spindle drill heads heimatec GmbH headquarters-germany The Way to Success Heimatec is an international manufacturing company headquartered in Renchen,
HARDINGE Spindle Tooling for Manual and CNC Lathes
www.hardinge.com HARDINGE Spindle Tooling for Manual and CNC Lathes Pioneers of Spindle Tooling Value in Workholding Team up with Hardinge to add value to your material-cutting processes and assembly operations.
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
FVL-VTC Series. Vertical Turning Lathes FVL VTC FVL VTC+C FVL-1600VTC+CY
FVL-VTC Series Vertical Turning Lathes FVL-1250 1600 2000VTC FVL-1250 1600 2000VTC+C FVL-1600VTC+CY 2 FVL-VTC Series Vertical Turning Lathe For Heavy-Duty Turning And Multi-Task Machining High-Precision
CLAMPING TECHNOLOGY Individual special clamping tools
CLAMPING TECHNOLOGY Individual special clamping tools 1 QUALITY SINCE 1958 Know-how, the highest quality and first class engineering. We see ourselves as a system supplier and offer our customers a full
sliding head machine, furthers the quest for cost and performance featuring the ability to switch between guide bush and non-guide bush types.
The Citizen A20, an evolving 5-Axis CNC sliding head machine, furthers the quest for cost and performance featuring the ability to switch between guide bush and non-guide bush types. Acclaimed for its
Example workpieces: - Gearbox casing. Example format: - Diameter 800 mm
RADIAL CHUCKS SAV 260.99-RSF 3 + 3 JAW CHUCKS - 3 + 3 jaw chuck with two independently actuated clamping circles - Easily adaptable from centred to balanced operation - Jaw stroke 15 mm (Stroke per jaw)