ISO B-Profile 60-Series. Body Size 1/8" up to 2 1/2" ISO B. ISO Standard. Ball Locking. Medium Pressure
|
|
|
- Adrian Hicks
- 6 years ago
- Views:
Transcription
1 Ball Locking ISO B ISO Series B 1/8" up to 2 1/2" ISO B-Profile Working Pressure Low Cycle, non-pulsating pressure rating Steel Stainl. Steel Brass 1/8" 350 bar 350 bar 210 bar 1/4" 350 bar 350 bar 255 bar 3/8" 280 bar 350 bar 185 bar 1/2" 280 bar 350 bar 240 bar 3/4" 175 bar 210 bar 150 bar 1" 140 bar 210 bar 105 bar 1 1/2" 105 bar 105 bar 105 bar 2 1/2" 105 bar 85 bar NSI/ISO Pressure Rating Steel Stainl. Steel Brass 1/8" 350 bar 140 bar 70 bar 1/4" 350 bar 140 bar 70 bar 3/8" 280 bar 105 bar 70 bar 1/2" 280 bar 105 bar 70 bar 3/4" 175 bar 105 bar 70 bar 1" 140 bar 70 bar 70 bar 1 1/2" 70 bar 70 bar 55 bar 2 1/2" 70 bar - 55 bar Technical escription The 60 series plug profiles con form to IS0 Standard series B and are compatible with other series complying with the same standard. dvantages poppet with crimped seal assures a maximum sealing at low flow rates and prevents seal washout at high flow rates. large number of locking balls distribute the work load evenly while providing alignment for the two parts of the coupling. Steel versions feature PTFE back-up ring which prevents seal damage for high pressure applications. Brass couplers have a double O-ring seal for redundancy in low pressure and vacuum applications. Sleeve-Lock: 60 series couplers are available with safety locking sleeves. Please add the suffix SL to the part number, e.g. H3-62-SL. Working Temperature -40 C up to +110 C (NBR) -20 C up to +200 C (FKM) depending on the medium. Special seals are available on request (see page 6). Heavy uty Nipples Parker 60 series heavy duty nipples are recoended for extended life in applications where high cycle rates and pressure surges are encountered. Machined from high tensile steel and specially hardened. To specify a heavy duty nipple, add the prefix H to the steel series part number, thus: HH2-63. pplications Semiconductor industry, steel manufacturing Pneumatic and hydraulic hand tools Food and bottling industry Boating, shipbuilding and offshore industry Pharmaceutical industry, laboratories Transport Power generation plants, hydroelectric power stations Material Coupling Brass Steel ISI 303 ISI 316 Coupling Brass Steel ISI 303 ISI 316 Sleeve Brass Steel ISI 303 ISI 316 Back-up Ring Stainless Steel Stainless Steel Stainless Steel Stainless Steel Valve Brass Steel ISI 303 ISI 316 Springs Stainless Steel Stainless Steel Stainless Steel Stainless Steel Locking Balls Stainless Steel Stainless Steel Stainless Steel Stainless Steel Seals NBR NBR NBR FKM Valve Holder Stainless Steel Stainless Steel Stainless Steel Stainless Steel Thread Brass Steel ISI 303 ISI 316 Material Plug Brass Steel ISI 303 ISI 316 Plug Brass Steel ISI 303 ISI 316 Valve Brass Steel ISI 303 ISI 316 Springs Stainless Steel Stainless Steel Stainless Steel Stainless Steel Seals NBR NBR NBR FKM Valve Holder Stainless Steel Stainless Steel Stainless Steel Stainless Steel Thread Brass Steel ISI 303 ISI 316 Flow Capacity with Oil with Viscosity of 43cSt at 38 C as per ISO 7241/ Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) Pressure rop (bar) 26
2 Couplings 1 Brass Ball Locking 1/8" 1/8" BSPP 11/16" 48,3 24,4 Brass 87 BH1-60-BSPP 1/8" 1/8" - 27 NPTF 11/16" 48,3 24,4 Brass 80 BH1-60 1/4" 1/4" BSPP 13/16" 61,2 29 Brass 158 BH2-60-BSPP 1/4" 1/4" - 18 NPTF 13/16" 57,4 29 Brass 145 BH2-60 3/8" 3/8" BSPP 1" 69,9 35,6 Brass 260 BH3-60-BSPP 3/8" 3/8" - 18 NPTF 7/8" 63,2 35,4 Brass 195 BH3-60 L 1/2" 1/2" BSPP 1 1/8" 77,5 45 Brass 383 BH4-60-BSPP 1/2" 1/2" - 14 NPTF 1 1/8" 72,9 45 Brass 365 BH4-60 3/4" 3/4" BSPP 1 5/16" 93,2 54,4 Brass 642 BH6-60-BSPP 3/4" 3/4" - 14 NPTF 1 5/16" 90,4 54,4 Brass 630 BH6-60 1" 1" BSPP 1 5/8" 106,2 64 Brass 970 BH8-60-BSPP 1" 1" /2 NPTF 1 5/8" 106,2 64 Brass 980 BH /2" 1 1/4" BSPP 2 3/8" 123,4 76,2 Brass 2145 BH12-60L-BSPP 1 1/2" 1 1/2" BSPP 2 3/8" 127,3 76,2 Brass 2130 BH12-60N-BSPP 1 1/2" 1 1/4" /2 NPTF 2 3/8" 123,4 76,2 Brass 2080 BH12-60L 1 1/2" 1 1/2" /2 NPTF 2 3/8" 123,4 76,2 Brass 2080 BH12-60N 2 1/2" 2" BSPP 3 3/4" ,1 Brass 5500 BH BSPP 2 1/2" 2" /2 NPTF 3 3/4" 141,5 101,1 Brass 5015 BH Brass 1 1/8" 1/8" BSPP 9/16" 32 10,5 16,4 10,8 Brass 19 BH1-61-BSPP 1/8" 1/8" - 27 NPTF 9/16" 32 11,2 16,5 10,8 Brass 19 BH1-61 1/4" 1/4" BSPP 3/4" 42,9 16,6 21,9 14,2 Brass 45 BH2-61-BSPP 1/4" 1/4" - 18 NPTF 3/4" 39, ,9 14,2 Brass 46 BH2-61 3/8" 3/8" BSPP 7/8" 49,3 19,7 25,7 19,1 Brass 74 BH3-61-BSPP 3/8" 3/8" - 18 NPTF 7/8" 42,7 13,1 25,6 19,1 Brass 62 BH3-61 1/2" 1/2" BSPP 1 1/8" 54,1 21,1 32,9 23,5 Brass 131 BH4-61-BSPP 1/2" 1/2" - 14 NPTF 1 1/8" 49,3 17, ,5 Brass 118 BH4-61 3/4" 3/4" BSPP 1 3/8" 64,5 21,9 40,3 31,4 Brass 235 BH6-61-BSPP 3/4" 3/4" - 14 NPTF 1 3/8" 61,7 20,1 40,3 31,4 Brass 229 BH6-61 1" 1" BSPP 1 5/8" 73,8 25,2 47,2 37,7 Brass 368 BH8-61-BSPP 1" 1" /2 NPTF 1 5/8" 73,9 33,4 47,8 37,7 Brass 378 BH /2" 1 1/4" BSPP 2 3/8" 120,9 67,5 74,7 44,5 Brass 1450 BH12-61L-BSPP 1 1/2" 1 1/2" BSPP 2 3/8" 124,7 67,5 74,7 44,5 Brass 1450 BH12-61N-BSPP 1 1/2" 1 1/4" /2 NPTF 2 3/8" 120,9 67,3 69,9 44,5 Brass 1340 BH12-61L 1 1/2" 1 1/2" /2 NPTF 2 3/8" 120,9 67,3 69,9 44,5 Brass 1340 BH12-61N 2 1/2" 2" BSPP 3 3/4" 142,7 77,3 104,1 63,2 Brass 3855 BH BSPP 2 1/2" 2" /2 NPTF 3 3/4" 139,2 73,7 104,1 63,2 Brass 3530 BH Please consider our security advices on the pages 12/13 27
3 Ball Locking Couplings 1 Steel 1/8" 1/8" BSPP 11/16" 48,3 24,4 Steel 81 H1-62-BSPP 1/8" 1/8" - 27 NPTF 11/16" 48,3 24,4 Steel 81 H1-62 1/4" 1/4" BSPP 13/16" 61,2 29,0 Steel 130 H2-62-BSPP 1/4" 1/4" - 18 NPTF 13/16" 57,4 29,0 Steel 138 H2-62 3/8" 3/8" BSPP 1" 69,9 35,6 Steel 241 H3-62-BSPP 3/8" 3/8" - 18 NPTF 7/8" 63,2 35,4 Steel 184 H3-62 1/2" 1/2" BSPP 1 1/8" 77,5 45,0 Steel 360 H4-62-BSPP L 1/2" 1/2" - 14 NPTF 1 1/8" 72,9 45,0 Steel 341 H4-62 3/4" 3/4" BSPP 1 5/16" 93,2 54,4 Steel 602 H6-62-BSPP 3/4" 3/4" - 14 NPTF 1 5/16" 90,4 54,4 Steel 592 H6-62 1" 1" BSPP 1 5/8" 106,2 64,0 Steel 906 H8-62-BSPP 1" 1" /2 NPTF 1 5/8" 106,2 64,0 Steel 914 H /2" 1 1/4" BSPP 2 3/8" 123,4 76,2 Steel 2135 H12-62L-BSPP 1 1/2" 1 1/2" BSPP 2 3/8" 127,3 76,2 Steel 2060 H12-62N-BSPP 1 1/2" 1 1/4" /2 NPTF 2 3/8" 123,4 76,2 Steel 2130 H12-62L 1 1/2" 1 1/2" /2 NPTF 2 3/8" 123,4 76,2 Steel 2130 H12-62N 2 1/2" 2" BSPP 3 3/4" ,1 Steel 4800 H BSPP 2 1/2" 2" /2 NPTF 3 3/4" 141,5 104,1 Steel 4800 H /2" 2 1/2" - 8 NPTF 3 3/4" 153,4 104,1 Steel 4950 H Steel 1 1/8" 1/8" BSPP 9/16" 32 10,5 16,4 10,8 Steel 18 H1-63-BSPP 1/8" 1/8" - 27 NPTF 9/16" 32,0 11,2 16,5 10,8 Steel 18 H1-63 1/4" 1/4" BSPP 3/4" 42,9 16,6 21,9 14,2 Steel 38 H2-63-BSPP 1/4" 1/4" - 18 NPTF 3/4" 39,1 14,0 21,9 14,2 Steel 36 H2-63 3/8" 3/8" BSPP 7/8" 49,3 19,7 25,7 19,1 Steel 68 H3-63-BSPP 3/8" 3/8" - 18 NPTF 7/8" 42,7 13,1 25,6 19,1 Steel 56 H3-63 1/2" 1/2" BSPP 1 1/8" 54,1 21,1 32,9 23,5 Steel 122 H4-63-BSPP 1/2" 1/2" - 14 NPTF 1 1/8" 49,3 17, ,5 Steel 109 H4-63 3/4" 3/4" BSPP 1 3/8" 64,5 21,9 40,3 31,4 Steel 217 H6-63-BSPP 3/4" 3/4" - 14 NPTF 1 3/8" 61,7 20,1 40,3 31,4 Steel 210 H6-63 1" 1" BSPP 1 5/8" 73,8 25,2 47,2 37,7 Steel 340 H8-63-BSPP 1" 1" /2 NPTF 1 5/8" 73,9 33,4 47,8 37,7 Steel 351 H /2" 1 1/4" BSPP 2 3/8" 120,9 67,5 69,9 44,5 Steel 1410 H12-63L-BSPP 1 1/2" 1 1/2" BSPP 2 3/8" 124,7 71,1 69,9 44,5 Steel 1280 H12-63N-BSPP 1 1/2" 1 1/4" /2 NPTF 2 3/8" 120,9 67,3 69,9 44,5 Steel 1365 H12-63L 1 1/2" 1 1/2" /2 NPTF 2 3/8" 120,9 67,3 69,9 44,5 Steel 1405 H12-63N 2 1/2" 2" BSPP 3 3/4" 142,7 69,4 104,1 63,2 Steel 3580 H BSPP 2 1/2" 2" /2 NPTF 3 3/4" 139,2 65,9 104,1 63,2 Steel 3580 H /2" 2 1/2" - 8 NPTF 3 3/4" 151,1 83,4 104,1 63,2 Steel 3700 H
4 Couplings Stainless Steel 1 Ball Locking 1/8" 1/8" BSPP 11/16" 48,3 24,4 ISI SH1-62-BSPP 1/8" 1/8" BSPP 14 48,3 24,0 ISI SSH1-62Y-BSPP* 1/8" 1/8" - 27 NPTF 11/16" 48,3 24,4 ISI SH1-62 1/8" 1/8" - 27 NPTF 11/16" 48,3 24,4 ISI SSH1-62Y* 1/4" 1/4" BSPP 19 61,2 29,0 ISI SH2-62-BSPP 1/4" 1/4" BSPP 13/16" 61,2 29,0 ISI SSH2-62Y-BSPP* 1/4" 1/4" - 18 NPTF 13/16" 57,4 29,0 ISI SH2-62 1/4" 1/4" - 18 NPTF 13/16" 57,4 29,0 ISI SSH2-62Y* 3/8" 3/8" BSPP 1" 69,9 35,6 ISI SH3-62-BSPP 3/8" 3/8" BSPP 1" 69,9 35,6 ISI SSH3-62Y-BSPP* 3/8" 3/8" - 18 NPTF 7/8" 63,2 35,4 ISI SH3-62 3/8" 3/8" - 18 NPTF 7/8" 63,2 35,4 ISI SSH3-62Y* 1/2" 1/2" BSPP 1 1/8" 77,5 45,0 ISI SH4-62-BSPP 1/2" 1/2" BSPP 1 1/8" 77,5 45,0 ISI SSH4-62Y-BSPP* L 1/2" 1/2" - 14 NPTF 1 1/8" 72,9 45,0 ISI SH4-62 1/2" 1/2" - 14 NPTF 1 1/8" 72,9 45,0 ISI SSH4-62Y* 3/4" 3/4" BSPP 1 5/16" 93,2 54,4 ISI SH6-62-BSPP 3/4" 3/4" BSPP 1 5/16" 93,2 54,4 ISI SSH6-62Y-BSPP* 3/4" 3/4" - 14 NPTF 1 5/16" 90,4 54,4 ISI SH6-62 3/4" 3/4" - 14 NPTF 1 5/16" 90,4 54,4 ISI SSH6-62Y* 1" 1" BSPP 1 5/8" 106,2 64,0 ISI SH8-62-BSPP 1" 1" BSPP ,2 64,0 ISI SSH8-62Y-BSPP* 1" 1" /2 NPTF 1 5/8" 106,2 64,0 ISI SH8-62 1" 1" /2 NPTF 1 5/8" 106,2 64,0 ISI SSH8-62Y* 1 1/2" 1 1/2" BSPP 2 1/2" 127,3 76,2 ISI SH12-62N-BSPP 1 1/2" 1 1/2" /2 NPTF 2 3/8" 123,4 76,2 ISI SH12-62N Stainless Steel 1 *Suffix Y designates FKM seal. 1/8" 1/8" BSPP 9/16" 32,0 10,5 16,4 10,8 ISI SH1-63-BSPP 1/8" 1/8" BSPP 17 32,0 10,5 19,6 10,8 ISI SSH1-63Y-BSPP* 1/8" 1/8" - 27 NPTF 9/16" 32,0 11,2 16,5 10,8 ISI SH1-63 1/8" 1/8" - 27 NPTF 9/16" 32,0 11,2 16,5 10,8 ISI SSH1-63Y* 1/4" 1/4" BSPP 19 39,1 16,6 21,9 14,2 ISI SH2-63-BSPP 1/4" 1/4" BSPP 3/4" 42,9 16,6 21,9 14,2 ISI SSH2-63Y-BSPP* 1/4" 1/4" - 18 NPTF 3/4" 39,1 14,0 21,9 14,2 ISI SH2-63 1/4" 1/4" - 18 NPTF 3/4" 39,1 14,0 21,9 14,2 ISI SSH2-63Y* Please consider our security advices on the pages 12/13 29
5 Ball Locking Stainless Steel 1 3/8" 3/8" BSPP 7/8" 49,3 19,7 25,7 19,1 ISI SH3-63-BSPP 3/8" 3/8" BSPP 7/8" 49,3 19,7 25,7 19,1 ISI SSH3-63Y-BSPP* 3/8" 3/8" - 18 NPTF 7/8" 42,7 13,1 25,6 19,1 ISI SH3-63 3/8" 3/8" - 18 NPTF 7/8" 42,7 13,1 25,6 19,1 ISI SSH3-63Y* 1/2" 1/2" BSPP 1 1/8" 54,1 21,1 32,9 23,5 ISI SH4-63-BSPP 1/2" 1/2" BSPP 1 1/8" 54,1 21,1 32,9 23,5 ISI SSH4-63Y-BSPP* 1/2" 1/2" - 14 NPTF 1 1/8" 49,3 17,5 33,0 23,5 ISI SH4-63 1/2" 1/2" - 14 NPTF 1 1/8" 49,3 17,5 33,0 23,5 ISI SSH4-63Y* 3/4" 3/4" BSPP 1 3/8" 64,5 21,9 40,3 31,4 ISI SH6-63-BSPP 3/4" 3/4" BSPP 1 3/8" 64,5 21,9 40,3 31,4 ISI SSH6-63-BSPP* 3/4" 3/4" - 14 NPTF 1 3/8" 61,7 20,1 40,3 31,4 ISI SH6-63 3/4" 3/4" - 14 NPTF 1 3/8" 61,7 20,1 40,3 31,4 ISI SSH6-63Y* 1" 1" BSPP 1 5/8" 73,8 25,2 47,2 37,7 ISI SH8-63-BSPP 1" 1" BSPP 1 5/8" 73,8 25,2 47,2 37,7 ISI SH8-63Y-BSPP* 1" 1" /2 NPTF 1 5/8" 73,9 33,4 47,8 37,7 ISI SH8-63 1" 1" /2 NPTF 1 5/8" 73,9 33,4 47,8 37,7 ISI SSH8-63Y* 1 1/2" 1 1/2" BSPP 2 1/2" 124,7 67,5 69,9 44,5 ISI SH12-63N-BSPP 1 1/2" 1 1/2" /2 NPTF 2 3/8" 120,9 67,3 69,9 44,5 ISI SH12-63N * Suffix Y designates FKM seal. ust Protection Material 1/8" for coupling luminium H1-65 1/8" for coupling Rubber H1-65M 1/8" for plug luminium H1-66 1/8" for plug Rubber H1-66M 1/4" for coupling luminium H2-65 1/4" for coupling Rubber H2-65M 1/4" for plug luminium H2-66 1/4" for plug Rubber H2-66M 3/8" for coupling luminium H3-65 3/8" for coupling Rubber H3-65M 3/8" for plug luminium H3-66 3/8" for plug Rubber H3-66M Stainless steel ISI 316 dust protections are available on request. 30
6 ust Protection Material Ball Locking 1/2" for coupling luminium H4-65 1/2" for coupling Rubber H4-65M 1/2" for plug luminium H4-66 1/2" for plug Rubber H4-66M 3/4" for coupling luminium H6-65 3/4" for coupling Rubber H6-65M 3/4" for plug luminium H6-66 3/4" for plug Rubber H6-66M 1" for coupling luminium H8-65 1" for coupling Rubber H8-65M 1" for plug luminium H8-66 1" for plug Rubber H8-66M 1 1/2" for coupling luminium H /2" for plug luminium H12-66 Seal-Kit Material 1/8" Seal NBR N0674 1/8" Seal FKM V0747 1/8" Back-up Ring² PTFE H /4" Seal NBR N0674 1/4" Seal FKM V0747 1/4" Back-up Ring² PTFE H67C-28 3/8" Seal NBR N0674 3/8" Seal FKM V0747 3/8" Back-up Ring² PTFE /2" Seal NBR N0674 1/2" Seal FKM V0747 1/2" Back-up Ring² PTFE /4" Seal NBR N0674 3/4" Seal FKM V0747 3/4" Back-up Ring² PTFE " Seal NBR N0674 1" Seal FKM V0747 1" Back-up Ring² PTFE /2" Seal NBR N /2" Seal NBR N0674 ¹ Two body seals are necessary ² Brass 60 series couplers use two O-rings but do not use a back-up ring. Please consider our security advices on the pages 12/13 31
Technical Description Standard design with ball locking mechanism for high pressure applications. Rugged construction.
Ball Locking Parker 1/4" up to 3/4" SM-Series Technical escription Standard design with ball locking mechanism for high pressure applications. Rugged construction. dvantages size 1/2" and above feature
DF-Series Pneumatic Couplings
Interchange Data: Parker 20-Series Manual Interchange (F-Series) Parker 30-Series Automatic Interchange (D-Series) Foster 3, 4, 5, and 6 Series Hansen 1000, 400, 500 (F-Series) Hansen 3000, 4000, 5000,
HT-Series Hydraulic Couplings
Interchange Data: Interchangeable to ISO16028 Parker FEM-Series, Snap-Tite 74-Series, Hansen FF, Aeroquip/Eaton FD89, Stucchi FIRG/Series 'A', Faster FFN/FFI/2FFN/2FFI, Safeway FF49-Series Materials: Machined
SINGLE SHUT OFF QUICK RELEASE COUPLINGS
233 Series C = 0,844 v 0 200 400 600 Compact robust construction High flow, low drop Wide range of connections C = 0,844 v 0 3 6 9 12 15 18 21 5 = 20mm 2 560 l/min ( inlet, drop bar) Rectus 21, Rectus
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/4" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Working Pressure PB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
RECTUS Series 21KB Technical Description Mini industrial coupling, internationally the most coon profile for this nominal diameter, in double shut-off design. Above average flow performance for liquid
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
Check valve type RK and RB
Check valve type RK and RB Product documentation Screw-in valve Operating pressure pmax: Flow rate Qmax: 700 bar 620 lpm D 7445 02-2017-3.1 by HAWE Hydraulik SE. The reproduction and distribution of this
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
8' HYDRAULIC HOSE & ADAPTER DISPLAY Page 1 of 6 rev032318
800.459.8423 Page 1 of 6 rev032318 4ft Section 4ft Section A5 A40 A50 A60 A70 A83 A40 A50 E30 A19 A40 A15 A15 A40 A50 A85 B90 B110 B120 C130 C140 C150 C160 E210 B60 D90 D100 D110 D130 A50 A60 A70 B80 B88
4/3 Proportional Directional Valve, Size SAE 10
/ Proportional Directional Valve, Size SAE Q max =. gpm [ l/min], p max = psi [ bar] Direct acting, sliding-spool design, with solenoid operation Series PDFC- Description Series PDFC proportional directional
Installation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
tubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
Installation and Operating Instructions
Man.rev...0 Installation and Operating Instructions Contents : TECHNICAL DATA OPERATION, CONSTRUCTION AND PARTS LIST DIMENSIONS MOUNTING PROTECTION KITS. SPECIAL INSTRUCTIONS FOR THE SAFE USE DOCUMENTS
Digital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Accessories Catalog. May 2006 Catalog AC605
Accessories Catalog May 2006 Catalog AC605 Discount Limited Warranty For ninety days after the date of purchase, Discount Hydraulic Hose.com warrants the products in this catalog to be free from defect
Beaded Hose Barbs 4601 (430292) 4603 (430392) 2 2 Pg. 83. Pg. 86 Beaded Hose Barb x MB 1-HS 2-MB. Pg. 85 Beaded Hose Barb x MB 1-HS 2-MB
Pressure Connections takes great pride in each fitting we sell. Standard material for our is steel with a RoHs compliant 96-hour salt spray finish that exceeds the SAE 72-hour salt spray requirement. For
Air-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
ALFRA hole punches application overview
ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Mounting Systems & Hydro-Grip
Mounting Systems & ydro-rip Table of ontents Section escription Page Open nd Standard Sleeve... 4 Self entering Saw & ead Sleeve... 5 Set Screw ead Sleeves... 5 Steel & luminum Spacers... 6 Self entering
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Air-supply elements. Air-supply elements MGE Flanged plate (p. 5-3) M12-1/4" (p. 5-4) Longitudinal end connector (p.
Air-supply elements MGE 13.0 5-1 Air-supply elements 1 2 3 4 5 6 7 8 Flanged plate (p. 5-3) Connection piece (p. 5-4) Connection screw fitting -1/4" (p. 5-4) Longitudinal end connector (p. 5-5) 9 11 12
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
Trunnion bearing housings for grinding mills FSDR.. K series
Trunnion bearing housings for grinding mills FSDR.. K series Bearing types Spherical roller bearings Bearing dimension series 39, 48 and 49 Shaft diameter range 825 to 1 460 mm Typical bearing-shaft combinations
Air Hose Products.
Air Hose Products 1.1 Bulk Red Air Hose 1.2 Jackhammer Hose Assemblies 1.3 Air Tool Hose Assemblies 1.4 Hot Air Blower Hose 1.5 Yellow Wire Braid Air Hose Assemblies and Fittings 1.6 Air Hose Fittings
flexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
Paddle wheel flow controller for On/Off control
addle wheel flow controller for On/Off control Type 8032 compact Type 8032 can be combined with... Type 8032 remote Indication, monitoring, transmitting and On/Off control in one device. rogrammable outputs
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
Essex County College - West Essex Campus Addition And Renovations dlb # / SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
INSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
Hydraulic Adapters STEEL PIPE ADAPTERS NPTF DRY SEAL PIPE ASSEMBLY INSTRUCTIONS. Steel Pipe Adapters. Steel Pipe Adapters. Hydraulic.
CONFORMANCE SAE J54 for hex nipples, expanders, elbows, tees and crosses SAE J54, J50 and J5 for bushing and plugs. Temperature Range -65 0 F to +400 0 F MATERIALS - SAE L4 carbon steel plated zinc with
CBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, water glycol, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
Diesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
WINCH OPERATING PRACTICES 1. Read the manufacturer's instructions before operating the winch. 2. Always inspect, test maintain and operate this winch in accordance with American National Standards Institute
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
NCR-80. BinMaster Price Book binmaster.com Subject to change without notice 1
NCR-80 inmaster Price ook 01-2019 binmaster.com Subject to change without notice 1 NCR-80 NCR-80 Non-contact radar continuously measures the level of powders, granules, solids, or liquids in a vessel.
Index. Accessories WE RESERVE THE RIGHT TO DISCONTINUE MODELS, OR CHANGE SPECIFICATIONS WITHOUT NOTICE OR INCURRING OBLIGATION
Index 9.00.01 07/2010.C Accessories Mounting Kits and Cross Reference - 300, 400 Series... 9.01.01 Mounting Kits - 500, 700, 900 Series... 9.01.02 Stud Nuts & Kits... 9.02.01 Stud Nuts & Kits - ISO 03,
LPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
FITTINGS ADVANTAGE AND EXPERTISE IN YOUR INDUSTRY
PNEUFITDADVANTAGE INCH RANGE Acetal push-in fittings Comprehensive size and range from 5/32" to 1/2" Approved for use in pneumatics, medical, food and drinks applications FITTINGS ADVANTAGE AND EXPERTISE
SS Band for increased durability (except 1/2 inch) 4000 PSI
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
Hydraulic Quick Couplers
Hydraulic Quick Couplers Agricultural, industrial, flat-face, and OEM hydraulic quick couplers. You will find trusted brands, such as Safeway, Stucchi, and Holmbury, to meet all your hydraulic quick coupler
SKODA LIVE CENTERS. Skoda & Sowa Heavy Duty Live Centers - CSN PARTS FOR HEAVY DUTY LIVE CENTERS. Parts For Heavy Duty Live Centres
Skoda & Sowa Heavy Duty Live Centers - CSN 243324 Features The rotating spindle is extended right through the tapered shank Two specially designed adjustable needle-roller bearings carry all radial loads
Pressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
Precision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
Oil & Gas
The Professional Choice Oil & Gas www.olaer.com 2 Oil & Gas Equipment Olaer is a global player specialising in innovative, efficient system solutions for temperature optimisation and energy storage. All
MTS AND MTS PR¼ 16 OUTPUT SEQUENTIAL TIMER PENTAIR CLEAN AIR SYSTEMS
MTS AND MTS PR¼ 16 OUTPUT PENTAIR CLEAN AIR SYSTEMS MTS DESCRIPTION The Model MTS sequencer has been designed to guarantee the control of diaphragm valves mounted on pulse-jet dust collector filters containing
15. Spare part list. Typing. Fabrikationsnr.: Type no.: Prod. no.: Prod. nr.: Ballart nr.: Årgang: Max. arb. tryk: Year: Max.
15. Spare part list Typing. Type no.: Ballart nr.: Fabrikationsnr.: Prod. no.: Prod. nr.: Årgang: Year: Jahr: Max. arb. tryk: Max. pressure: Max. Druck: Egenvægt: Own weight: Eigengewicht: Spænding: Voltage:
Accessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 70 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
Directional valves Electrically operated Series 563, 565, 567. Brochure
Directional valves Electrically operated Brochure 2 Directional valves Electrically operated 3/2-directional valve, Series 563 Qn = 1350 l/min plate connection Electr. connection: Plug, Form B, industry
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8
EXPLODED VIEW OF KINNEY MODELS KC-5 & KC-8 KC-5 KC-8 Pump RPM 638 1022 Motor HP (kw) 0.33 (0.25) 0.50 (0.37) Oil Capacity, qts. (liters) 0.8 (0.76) Forced Drain w/ open suction, qts. (liters) 0.85 (0.80)
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 for further approvals see page 9 Applications Machine building Shipbuilding
Part No. Original Part No. Original MPT No. FPT No. Description. Part No. Original Part No. Original MPT No. FPT No. Description
COUPLERS Legacy Quick Couplers Legacy Brass Couplers give Premium Performance with Economy Price. Legacy Quick Connect Couplings are machined from top grade materials to the same exacting specifications
Brass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
2-way motor valve. Power consumption. Type 8746 MFC/MFM. Technical data Materials Body Housing Seals 1) Pressure Range 2) < 1 % FS Sensitivity Span
2-way motor valve Actuator isolated from flow path Excellent range and fast response times Low power consumption Orifice sizes 1 to 10 mm Versions: Standard, positioner, process controller and high pressure
Cutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
Insertion Flow sensor for continuous flow measurement
Insertion Flow sensor for continuous flow measurement Economic integration into pipe systems 2 wire frequency coil (sinusoidal) version 3 wire frequency Hall effect (pulse) version to directly interface
.JET. HP-5A/15A/35A Hydraulic Press Parts List EQUIPMENT& TOOLS. JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company.
.JET EQUIPMENT& TOOLS HP-5A/15A/35A Hydraulic Press Parts List (HP-15A shown) JET EQUIPMENT & TOOLS, INC. A WMH - Walter Meier Holding Company P.O. BOX 1349 Auburn, WA 98071-1349 253-351-6000 Fax 253-939-8001
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION
SECTION E CONTENTS THREE WAY VALVES DESCRIPTION PAGE 70-600, Threaded Bronze E-1 70-900, Solder Bronze E-2 76-600, Threaded Stainless Steel E-3 3-Way Valve Application E-4 Chromium plated ball 70-600 3-Way
Precision Chucks for Improved Accuracy and Increased Productivity
Precision Workholding Technology Precision Chucks for Improved Accuracy and Increased Productivity Precision Air Chucks (Self Contained Design) MicroCentric Precision Air Chucks feature a patented open
Adjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
APPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
Valve Island with Electronic I/O
Screw in Temperature /Switch with display for ON/OFF Control Indication, monitoring, transmission and ON/OFF control in one device Extra large display Menu guided parametrisation Complete communication
PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
Portable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel PORTABLE HACKSAWS Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable
All Stainless Steel / SS Case Pressure Gauge
All Stainless Steel / SS Case Pressure Gauge 27L, 27B Series HAWK 27L and 27B series bourdon tube all stainless steel pressure gauges are designed to fulfill the requirements of high quality from various
Effective Date: October Rev. 5/11/2018- Void After: October 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
ACCESSORIES. Table of Contents HYDRAULIC HOSE
Table of Contents ACCESSORIES August, 2015 s are subject to change without notice Hydraulic Quick Couplers........................... 2 General Purpose Quick Couplers...8 Pneumatic Quick Couplers...10
Measuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
CAT GB. Quick-release couplings and accessories for Air Conditioning & Refrigeration. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0118-GB Quick-release couplings and accessories for Air Conditioning & Refrigeration UNI EN ISO 9001 Cert. n 905 ISO/TS 16949 Quick-release couplings and accessories for Air Conditioning & Refrigeration
Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit
Shower Only PL8900-00 & TR-SH Pressure Balance Shower Only Dual Control (Volume & Temperature) Ceramic Disc Cartridge Platinum Shower Trim Kit - Installation Instructions Before Your Installation Read
Lockformer / 16 Gauge Speednotch
Lockformer / 16 Gauge Speednotch INSTALLATION PRELIMINARY: After uncrating, locate unit, with or without base skid, to area of operation. Unbind foot switch cord and cylinder hoses and remove gauge pin
We Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for successful
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
Portable Hacksaws for Tough Duty
Portable Hacksaws for Tough Duty On-site cutting of pipe up to 30" OD and structural steel Pneumatic Electric Hydraulic CS Unitec's power hacksaws offer a wide range of options for portable cutting of
Product Catalogue O-Rings & Back Up Rings O-Ring C
Product Catalogue O-Rings & Back Up Rings O-Ring.98115 - C The information contained in this catalogue is based on many years of experience in the fluid power industry, specifically in the manufacturing
USB 2.0-IP67 Water Resistant Connector System
Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can
FLOAT OPERATED LEVEL CONTROLLER
ELECTRONIC LEVEL SWITCH (HORIZONTAL) APPLICATIONS: Senses a specific liquid level and produces electric output. High or low level control. Electric output can activate alarms, solenoid valves or other
GRACO AIRPRO AIR SPRAY GUN
GRACO AIRPRO AIR SPRAY GUN PART NUMBERS AND SCHEMATICS GUIDE Company Profile Since 1944, Marco has developed a strong tradition of providing innovative and reliable products and services to the surface
LF (Large Flange) Fittings - Adapters. (505)
LF (Large ) Fittings - dapters www.idealvac.com (505)72-007 Vacuum Fittings - dapters - olt Sets LF (Large ) ISO NW LF Specifications Max. Positive Pressure over pressure centering ring 0 psig Torque Rating
Digital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
Digital flow transmitter for continuous flow measurement
Digital flow transmitter for continuous flow measurement Compact or remote version for DN 06 to 400, PN10 Shows both flow rate and volume (with two totalizers) Automatic-calibration: TEACH-IN Simulation:
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
CONTINUOUS SAMPLING SYSTEMS
For over 0 years, Mobile s OVERSHOT WIRELINE CONTINUOUS SAMPLING SYSTEM has been recognized as the leading method for obtaining continuous samples while drilling in cohesive soils - fast, effective, hollow
Quality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
Bolt Tensioner. Axial Bolt Tensioning using High-Pressure Hydraulic. SSV and HM Axial bolt tensioning without torquing!
Bolt Tensioner Axial Bolt Tensioning using High-Pressure Hydraulic SSV and HM Axial bolt tensioning without torquing! SSV Function of a Bolt Tensioner (SSV) PG 3 in simplified representation Bolt to tension
Proportional directional valves
01/10 Proportional directional valves 6.12 Type 4WRPEH6...L2X NG 6 Up to 315 bar Up to 40L /min Contents Function and configuration 02 Ordering code 03 Symbols 03 Technical data 04 Electrical connection
Vinay Engineering Co.
+91-8048077750 Vinay Engineering Co https://www.vinayengineering.com/ We are one of the leading manufacturers and exporters of a wide range of Precision Engineering Products. Due to their dimensional accuracy,
PACKER REPLACEMENT RUBBERS TABLE OF CONTENTS BAKER MODEL R STYLE RUBBERS 1 BAKER MODEL R STYLE KITS 2 BAKER MODEL R BIG BORE RUBBERS 3
PACKER REPLACEMENT RUBBERS TABLE OF CONTENTS PAGE BAKER MODEL R STYLE RUBBERS 1 BAKER MODEL R STYLE KITS 2 BAKER MODEL R BIG BORE RUBBERS 3 BAKER MODEL R BIG BORE KITS 3 BAKER LOK-SET RUBBERS 4 BAKER LOK-SET