ALFRA hole punches application overview
|
|
- Emery James
- 6 years ago
- Views:
Transcription
1 ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F 600 N/² - - Material thickness when using Ø Ø Ø Ø 9.5 Diameter.7 /M/PG7-5.5 /M/PG7-6.5 /M6 5. /PG9-6.5 /M6.7 /M/PG7-6.5 /M6 custom-made products Ø for predrilling Ø Ø Ø Ø Ø Machining possibilities using wrench or ratchet up to Ø 89 Hydraulic drive 6
2 Ball bearing screw 4 High-tensile bolts for the toughest operating conditions Protrusion of ball bearing outside protective ring ensures perfect force transmission to wrench or punching tool Ball bearings encapsulated in aluminium rings Extremely long-life and perfectly protected against soiling UNF fine thread 4 7
3 ALFRA hole puncher MonoCut Hole punch MonoCut for sheet steel (S5) With UNF fine thread With 4 crosshair markings for simple, central alignment BALL BEARING >0% Force saving "The max. material thickness for which a hole punch can be used always depends on the screw and s used." Usable up to a material thickness of:.0 sheet steel with /4" (9.0 ) screw or.0 sheet steel with /8" (9.5 ) screw or Hole punch MonoCut sets All sets are supplied in heavy-duty practical plastic cases. Ø Ø metric M - M M 0 - M M M M M 6 Ø PG Ø Inch /" /4" - 7/8" " - -7/" -/4" /" - -/6" - -5/6" - -/8" - -/8" -/" 0.5 0,598 0,68 0,7 0,748 0,80 0,886.0,4,0,48,80,6,457,496,594,70,850,95,988,6,6,4.5 Ø Conduit /" - /4" " /4" - /" " joint screws Ø 9.5 x 50.0, pre-drill HSS Ø.0, tube lubricating paste 8
4 ALFRA hole puncher MonoCut Ø in Material thickness (S5) Metric PG Inch Conduit & Pipe with ball bearing Punches and dies matching matching matching with ball bearing.7.0 M 7 /" 0, /6" 0, , , M , /6" 0, , /4" 0, , M 0-0, /6" 0, , /8" 0,886 /" /6" 0, , M 5 - ", /6", ,4 /4" ,4 /4" /8", , /", /4", M - -, /6", /",6 " /8", /8, , /", M , /8", , /6",70 /4" /4", , /8", /6",95 /" M , /8", /4", , /8",4 " M 6 - -/", /8", Above Ø 68.0 we recoend the use of hydraulic equipment , /4", , /8",9 /" M /8", ", /8", , Above 89.0, the use of hydraulic equipment is generally required. Punch Die /",504 " /8", , /" 4,547 4" , Required accessories: special counternut L 049 9
5 Split hole punch TriCut Split hole punch TriCut for sheet steel (S5) With -fold split With UNF fine thread With 4 crosshair markings for simple, central alignment BALL BEARING >0% Force saving "The max. material thickness for which a hole punch can be used always depends on the screw and s used." Usable up to a material thickness of:.0 sheet steel with /4" (9.0 ) screw or.0 sheet steel with /8" (9.5 ) screw or.5 steel sheet with M6 (6.0 ) screw or Split hole punch TriCut - sets All sets are supplied in heavy-duty practical plastic cases. Ø Ø metric M - M M 0 - M M M M M 6 Ø PG Ø Inch /" /4" - 7/8" " - -7/" -/4" /" - -/6" - -5/6" - -/8" - -/8" -/" 0.5 0,598 0,68 0,7 0,748 0,80 0,886.0,4,0,48,80,6,457,496,594,70,850,95,988,6,6,4.5 Ø Conduit /" - /4" " /4" - /" " ball bearing screw Ø 6.0 x 40.0, ball bearing screw Ø 9.5 x 50.0, ball bearing screw Ø 9.0 x 55.0, pre-drill HSS Ø 0.0, can lubricating paste + ball bearing screws Ø 9.5 x 50.0, ball bearing screw Ø 9.0 x 55.0, ball bearing screw Ø 9.0 x 75.0, pre-drill HSS Ø 0.0, can lubricating paste + ball bearing screws Ø 9.5 x 50.0, pre-drill HSS Ø 0.0, tube lubricating paste + ball bearing screws Ø 9.5 x 50.0, ball bearing screw Ø 9.0 x 55.0, ball bearing screw Ø 9.0 x 75.0, pre-drill HSS Ø 0.0, can lubricating paste 0
6 Split hole punch TriCut Ø in Material thickness (S5) Metric PG Inch Conduit & Pipe Punches and dies, with ball bearing Punches and dies matching matching with ball bearing.5.5 M 7 /" 0, , M , , M 0-0, /8" 0,886 /" M 5 - ", ,4 /4" ,4 /4" /", M - -, /",6 " , M , /6",70 /4" , /6",95 /" M , /8", , /8",4 " M 6 - -/",
7 Split hole punch TriCut+ Split hole punch TriCut+ for sheet steel (S5) and stainless steel With -fold split With UNF fine thread With 4 crosshair markings for simple, central alignment BALL BEARING >0% Force saving "The max. material thickness for which a hole punch can be used always depends on the screw and s used." Usable up to a material thickness of:.5 steel sheet with /4" (9.0 ) screw or.0 steel sheet with 7/6" (. ) screw or Split hole punch TriCut+ - sets All sets are supplied in heavy-duty practical plastic cases. Ø Ø metric - M M 0 - M M M M M 6 Ø PG Ø Inch /4" - 7/8" " - -7/" -/4" /" - -/6" - -5/6" - -/8" - -/8" -/" 0,598 0,68 0,7 0,748 0,80 0,886.0,4,0,48,80,6,457,496,594,70,850,95,988,6,6,4.5 Ø Conduit /" - /4" " /4" - /" "
8 Split hole punch TriCut+ Ø in Material thickness (VA) Metric PG Inch Conduit & Pipe Punches and dies, with ball bearing Punches and dies matching matching with ball bearing , M , , M 0-0, /8" 0,886 /" M 5 - ", ,4 /4" /", M - -, /",6 " , M , /6",70 /4" , /6",95 /" M , /8", , /8",4 " M 6 - -/",
9 Split hole punch TwinCut Split hole punch TwinCut for sheet steel (S5) and stainless steel With -fold split With UNF fine thread With 4 crosshair markings for simple, central alignment BALL BEARING >0% Force saving "The max. material thickness for which a hole punch can be used always depends on the screw and s used." Usable up to a material thickness of:.0 steel sheet with /4" (9.0 ) screw or.5 steel sheet with 7/6" (. ) screw or.0 steel sheet with /8" (9.5 ) screw or Split hole punch TwinCut - sets All sets are supplied in heavy-duty practical plastic cases. Ø Ø metric M - M M 0 - M M M M M 6 Ø PG Ø Inch /" /4" - 7/8" " - -7/" -/4" /" - -/6" - -5/6" - -/8" - -/8" -/" 0.5 0,598 0,68 0,7 0,748 0,80 0,886.0,4,0,48,80,6,457,496,594,70,850,95,988,6,6,4.5 Ø Conduit /" - /4" " /4" - /" "
10 Split hole punch TwinCut Ø in Material thickness (VA) Metric PG Inch Conduit & Pipe Punches and dies, with ball bearing Punches and dies matching matching with ball bearing.7.0 M 7 /" 0, , M , , M 0-0, /8" 0,886 /" M 5 - ", ,4 /4" /", M - -, /",6 " , M , /6",70 /4" , /6",95 /" M , /8", , /8",4 " M 6 - -/",
11 ALFRA hole punch FormCut Hole punch FormCut for sheet steel (S5) with sideways punch part ejection With UNF fine thread With 4 crosshair markings for simple, central alignment "The max. material thickness at which a square or rectangular hole punch (or even special tool) can be used always depends on the and the cross-section of the tool (length x width or special shape)." 6
12 ALFRA hole punch FormCut in Material thickness (S5) For use in predrilling 4 incl. - 4 counternut Ball bearing pressure nut Adapter for hydraulic Hole punch FormCut - square - for sheet steel (S5).7 x x x x x x x x x x x x x in Material thickness (S5) Number of poles For use in predrilling 4 incl. - 4 counternut or bridge Ball bearing pressure nut Adapter for hydraulic Hole punch FormCut - rectangular - for sheet steel (S5) 7.0 x x x x x x x x Hole punch FormCut - rectangular - for heavy plug connectors (S5) - for sheet steel (S5) 6.0 x pole x pole x pole x x pole x x
13 ALFRA hole punch FormCut+ Hole punch FormCut+ for sheet steel (S5) and stainless steel with sideways punch part ejection With UNF fine thread With 4 crosshair markings for simple, central alignment "The max. material thickness at which a square or rectangular hole punch (or even special tool) can be used always depends on the and the cross-section of the tool (length x width or special shape)." 8
14 ALFRA hole punch FormCut+ Material thickness (VA) For use in predrilling 4 incl. - 4 counternut Ball bearing pressure nut Hole punch FormCut+ - square - for stainless steel (VA).7 x x x x x Adapter for hydraulic x x x x x x x x Material thickness (VA) Number of poles For use in predrilling incl. - 4 counternut or bridge Ball bearing pressure nut Hole punch FormCut+ - rectangular - for stainless steel (VA) 7.0 x x x x x x x Adapter for hydraulic x Hole punch FormCut+ - rectangular - for heavy plug connectors - for stainless steel (VA) 6.0 x pole x pole x pole x x pole x x
15 ALFRA hole punches sanitary For punching out holes in washbasins Designation Bolt size Ø 8. Hole punch complete M 0 x 09 Ø.7 Hole punch complete M 0 x 094 Ø 5.0 Hole punch complete M 0 x 095 Ø 7.0 Hole punch complete M 0 x 09 Draw bolt M 0 x Hole punch set - sanitary 0450 In plastic case Contents: hole punches s M 0.0 x ring open-ended wrench 7 ALFRA Dual hole punches sanitary For punching out holes in washbasins Spanner actuation size 9 Reversing die Designation Bolt size 8 and hole punches cpl. 0 x 55 special 0456 and 5 hole punches cpl. 0 x 55 special 0460 Draw bolt 0 x 55 special 0457 Counter holder 0456 dual hole punch Ø 8/ 0460 dual hole punch Ø /5 0
16 ALFRA hole punches Sub-Min-D For "Sub-Min-D" multiple plug connectors - for sheet steel (S5) and stainless steel For punching out the cutout for 9-50-pole plug connectors. Anti-rotation axles for punches and dies are used as s. All hole punches are fitted with side ejection for the waste piece. No jaing in the die. The hole punches are supplied in heavy duty, practical plastic cases. Pressure nut 069 Die Adapter for hydraulic actuation Axle Anti-rotation Punch Counternut Material thickness (S5)/VA Number of poles For use in predrilling 4 incl. - 4 counternut or bridge Hole punch Sub-Mini-D - rectangular 9.8 x..0 x.5 9-pole x..0 x.5 5-pole Ball bearing pressure nut Adapter for hydraulic 4.9 x..75 x.5 5-pole x..75 x.5 7-pole x.9.65 x.0 50-pole
17 ALFRA hole punches special forms All hole punches are fitted with side ejection for the waste piece. No jaing in the die. The hole punches are supplied in heavy duty, practical plastic cases. 04 Material thickness (S5)/VA For use in predrilling incl. - 4 Hole punches special forms 4 counternut or bridge Ball bearing pressure nut Adapter for hydraulic Ø.5 with lug.0 x Ø.5 -sided flattened to x Ø.5 4-sided flattened to 0..0 x x 7.0 x 0.0 for profile cylinder.0 x Ø 6. 4-sided flattened to x
18 ALFRA hole punch custom-made products We can make any form of circular, square, rectangular hole punch to your drawings at short notice. Please state whether your enquiry is for manual or hydraulic actuation in addition to the sheet thickness and material number. Ask for our technical support. Hole punch custom-made products Ø diameter d Material thickness Material type Circular Sheet steel (S5) Stainless steel (VA) Ø diameter d Number of lugs Lug width Material thickness Material type Circular with lugs Sheet steel (S5) Stainless steel (VA) Edge length a Material thickness Material type a Square Sheet steel (S5) Stainless steel (VA) Width b Height h Material thickness Material type b h Rectangle Sheet steel (S5) Stainless steel (VA) Ø diameter d Flattened to Material thickness Material type Circular flattened on one side Sheet steel (S5) Stainless steel (VA) Ø diameter d Flattened to Material thickness Material type Circular flattened on two sides Sheet steel (S5) Stainless steel (VA) Edge length a Corners flattened to Material thickness Material type a Square with 4 flattened corners Sheet steel (S5) Stainless steel (VA)
SAWS, PIPE CUTTERS. Design. Blade
SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationHolemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationHolemaking. Contents MADE FOR THE TRADE!
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationQuality tools and machines 100 Part A
w w w. a l f r a. d e Punching Drilling Cutting Deburring Quality tools and machines 100 Part WELCOME! We take pride in our achievement - over 60% in-house manufacturing in four locations in Germany and
More informationCutting. Contents. Cutting. Cutting Introduction B.2 B.1. Cutting tools B.4. Front cable cutter B.6. Cable cutter B.7. Cutting and releasing tools B.
Contents Introduction.2 tools.4 Front cable cutter.6 Cable cutter.7 and releasing tools.9 Mounting rail cutter.11 Sheet holes.12 Electrician s knives/electrician s scissors.14.1 Introduction A large number
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationMaintenance. Equipment for general applications in the work place
Equipment for general applications in the work place 184 Pipe Wrenches Heavy Duty Forged steel jaw provides maximum strength. Full floating hook jaw, provides instant grip, easy release. Large knurl and
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationScrews. Introduction. 1. Nuts, bolts and screws used to clamp things together. Screws are used for two purposes:
Screws Introduction Screws are used for two purposes: 1. To clamp things together. 2. To control motion. 1. Nuts, bolts and screws used to clamp things together. Nuts, bolts and screws that are used for
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationadaptivemechanical adaptive
Mechanical clamping elements mechanical 6 Content Product group 6 Sliding clamp, mechanical 6.2210 Clamping block, mechanical 6.2212 High-pressure spindle, mechanical with integral wedge system 6.2270
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationTOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...
TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49
More informationALFRA cutting devices
4 ALFRA cutting devices For mounting rails Handle: reinforced - soft touch Limit stop with mm/inch laser-engraved Burr-free, precise 90 cuts Lowest-possible cutting play 4 ALFRA profile rail cutting device
More informationHMP-200 BENDER INSTRUCTION SET
HMP-200 BENDER INSTRUCTION SET HMP-200 BENDER ASEMBLY INSTRUCTIONS STEP 1 STEP 2 BOLT LEFT SIDE PLATE TO BASE AS SHOWN WITH 1/2 x20 HEX BOLT & FLAT WASHER WELD BASE TO PLATE ON EACH SIDE NOTE: OFFSET HOLE
More informationHow to Mount a Moto Accessories MV Agusta F4 Hugger in Less than 30 Minutes.
How to Mount a Moto Accessories MV Agusta F4 Hugger in Less than 30 Minutes http://idealcycle.com/mv_agusta Materials and Tools: 13 10 4 1 3 2 5 11 6 15 17 14 12 9 8 16 7 1. Electric drill 2. Tap drill
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More information1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers
INSTRUCTION MANUAL 1904, 1904Pg, 1904PgSB, and 1906SB High Capacity Ratchet Knockout Drivers Read and understand all of the instructions and safety information in this manual before operating or servicing
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationINSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT
INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS
More informationMiniature Steam Pty Ltd (Incorporating Live Steam Supplies)
Miniature Steam Pty Ltd (Incorporating Live Steam Supplies) Materials List 28 May 2013 The attached listings outline products we offer and their retail prices as at the above date. We reserve the right
More informationMB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA PHONE FAX
MB-105 BENDER INSTRUCTION SET PRO-TOOLS 7616 INDUSTRIAL LANE TAMPA, FLORIDA 33637-6715 813-986-9000 PHONE 813-985-6588 FAX ASSEMBLY INSTRUCTIONS IN THE FOLLOWING INSTRUCTIONS WE WILL EXPLAIN THE ASSEMBLY
More informationTools Step Drill Bits
Step Drill Bits ompany PLs -more & 1701 shown 1701T shown 1702 shown 1702T shown A Drives A s Split Point Step Drills The spiral flutes of RUKO high-performance step drills are BN-ground from the solid
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationRittal Automation Systems Hand Tools
Rittal Automation Systems Hand Tools 2 RAS Hand Tools Rittal Automation Systems Hand Tools Tool bags...9 Screwdrivers...10 Hex wrench...14 Bit and bit holders...15 Crimping pliers...17 Wire end ferrules...20
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More information4-8 HSF 250 Patriot. Line Stop Fitting Installation Instructions. Installation Instructions and Best Practices continued on back
HSF 250 Patriot Heavy Duty Line Stop Fitting - 4, 6, 8 inch Nominal Sizes Line Stop Fitting Installation Instructions Push and Pin Completion Plug Installation Instructions IMPORTANT: Read installation
More informationTable and Furniture Base Fittings Plinth Adjusting Fittings
Adjusting screw with M8 or M thread Rigid, for glide inserts, steel thread Finish/Colour: Black, thread galvanized Version: With acceptance Ø30 mm Thread M8 650.22.381 M 650.22.382 Packing: 1 or 0 pcs.
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationFisher 667 Diaphragm Actuators Size 80 and 100
Instruction Manual 667 Size 80 and 100 Actuators Fisher 667 Diaphragm Actuators Size 80 and 100 Contents Introduction... 1 Scope of Manual... 1 Description... 2 Specifications... 2 Maximum Pressure Limitations...
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationClamping devices 521
Clamping devices 521 522 Product overview Clamping devices Adjustable straps K0001 Hook clamps K0012 Goose-neck straps with long slot K0002 Page 526 Hook Clamps with collar K0013 Page 535 Equipped clamps
More informationWagons & Chests. Tool Sets. (FA Series) Modular Storage Tray Sets. Full-extension ball bearing drawer slides open and close easier
Wagons & Chests Modular Storage Tray Sets Tool Sets (FA Series) Full-extension ball bearing drawer slides open and close easier Anti-shock protection on all four corners Central locking with two reversible
More informationGlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More informationBuildPro Welding Tables
Introducing the new BuildPro Welding Tables The affordable, professional BuildPro Welding Tables are setting a new standard in price and performance. Plates can be reconfigured to extend the width of the
More informationVIEWING OPTIONS: In Adobe PDF Viewer, from the main toolbar choose View, then Page Display, turn on Two-Up and Show Cover Page During Two-Up
VIEWING OPTIONS: To make our catalog easier to read we recommend using a two page display, as some sections have one page for the exploded view and one for the parts listing. Changing these settings will
More informationBedienungsanleitung - Operating Instructions - Mode d emploi
Bedienungsanleitung - Operating Instructions - Mode d emploi LAMINATED BUSBAR MACHINING UNIT 2017 Alfra GmbH II. Industriestraße 10 D-68766 Hockenheim Tel.: +49 (0)6205-3051-0 Fax: +49 (0)6205-3051-150
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationElectrical Construction Name:
Tools of the Trade The following are common tools that are used in the electrical industry. This hand-out is to help familiarize you with the tools, the terminology, and their use. Retractable Steel tape
More informationIndex. Installation and Tools. Installation and Tools... Page
Super SM Index... Page Connector Mounting Hole Chart.... 82 for Flange Mount.... 84 Mounting Hole Patterns and Seal Solder Tools... 85 for Thread-in.... 86 () for Thread-in.. 87 0.9 mm (SST) for Thread-in...
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationPrecision Universal Bevel Protractor, Set
ß 37006 Protractors Measuring and laying-out tools, gauges 0 With 0-180 scale and locking screw. Standard steel, chrome-plated, scale dazzle-free and with matt-chromed finish. 37006 Arc Length of 37006...
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationCatalog Drilling & Tapping Consumables
Catalog 0 Drilling & Tapping Consumables MAGTRON MB0 MAG-DRILL The Magtron electro-magnetic drilling machine has been designed, developed and manufactured to the very highest standards to provide users
More informationTools for Plumbing. Introduction
2 Tools for Plumbing Introduction So far, we have studied the importance of plumbing system, its stages and the role and responsibilities of a plumber. We will now look at the various tools that help a
More informationOWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir of Engineering
KRESS CORPORATION ENGINEERING Design of Thru and Threaded Holes Standard DOC ID 095007 REVISION A TYPE PORTAL OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir
More informationMODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
More informationFactory Assistance: Phone: Fax: Page 1
CABLE RUNWAY ACCESSORIES Radius Drop / Stringer Drop Provides 3 bend radius Radius drop fits 6, 12 and 18 runway made from 1-1/2 x 3/8 tubing Steel construction Includes (3) cable spools, (1) bolt, (1)
More informationMeasuring and Laying-Out Tools, Testing Instruments
ß 7006 0 With 0-180 scale and locking screw. Protractors Measuring and Laying-Out Tools, Testing Instruments Standard steel, chrome-plated, scale dazzle-free and with matt-chrome finish. 7006 Arc Ø Blade
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationFeatures. Continuous Duty Cycle Actuators
Features Predictable life. Continuous operation. Oil lubricated. High mechanical and thermal efficiency 2 models available. Capacity 3,500 to 27,000 pounds Available with C-Face motor adaptors and speed
More informationINTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
More informationOverview. Linear Motion and Assembly Technologies /11 Aluminum Framing. Bosch Rexroth Corp. Section 15: Tools
8981 500 201 08/11 Aluminum Framing Linear Motion and Assembly Technologies 1 Section : Tools Overview With Bosch Rexroth aluminum structural framing, you can either specify profiles square cut to length,
More informationStudents have little or no previous knowledge or skill in the material being covered.
Youth Explore Trades Skills Description This Activity Plan will enable students to identify the differences between metric and imperial bolts (cap screws). They will learn how to measure a bolt and determine
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationThread protection accessories are installed at the MODIX production factory and delivered with couplers.
Installation of MODIX Rebar Coupler Identification of the product The type of MODIX Rebar Coupler can be identified by the marking on the product. Size of the Coupler can be identified also according to
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More informationGlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)
List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.
More information45PC. TAP AND DIE SET
Model # 7560 7561 45PC. TAP AND DIE SET OPERATOR S MANUAL STORE THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE Wear eye protection Use proper lubrication WARNING: FOR HAND CUTTING APPLICATIONS ONLY.
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationSLIDE GATE SERVICE CONDITIONS
SLIDE GATE The model is a 4 side sealing slide gate designed for wall mounting. It is used mainly in water treatment, irrigation, hydraulic works and hydroelectric power plants. There are two different
More informationSLIDE GATE. The MU series is used mainly in water treatment, irrigation, hydraulic works and hydro-electric power plants.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationinstallation guide 1 GUIDE#: PWB-wwpontoon-pol-004
f250 pontoon WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks tower fits Pontoon boats with 96 to 102 inch wide beam widths. This measurement is taken from
More informationElectronic Indicators. Advanced Model
Electronic Indicators Advanced Model Meets ASME B89.1.10M-2001 standards 320 degree rotating display digital/analog Stem diameter: 3/8 Button functions: tolerance GO and NOGO display, data preset, measuring
More informationThese Installation Instructions are valid for antennas in the following version :
Installation Instructions 2 ft Antennas (with M-Mount) SB, SBX (RFS CompactLine ) SP, SPF, SPX, SD, SDX, SU, SUX (RFS SlimLine ) PAL, DA, DAX, UA, UDA, UXA (Microwave) NMT 391-11(e) Antenna with integrated
More informationSCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter
ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of
More information5-Axis Machine Tools from SMW-AUTOBLOK
5-Axis Machine Tools from SMW-AUTOBLOK 5-Axis Machine Tools ensures the following advantages: Ideal suitable for OP 10 use ST5-2G also suitable for OP 20 use Jaws with SinterGrip clamping inserts for clamping
More informationThe Queen Quilter Professional Quilters Kit Frame
The Queen Quilter Professional Quilters Kit Frame Assembly Instructions Table of Contents: Before you begin......................... Pg. 2 Wood parts............................. Pg. 3 Hardware..............................
More informationAntenna Installation Manual
High Performance Antennas 3 & 4 ft. (0.9 & 1.2 m) Antenna Installation Manual Please read the manual completely and carefully before installation. Instructions are intended for qualified and experienced
More informationPROFESSIONAL FLARING TOOL 001ERL 37 & ERL 37
PROFESSIONAL FLARING TOOL 001ERL 37 & 45 002ERL 37 001ERL shown here OWNER S MANUAL 199R11215 EDUCATIONAL TIPS Make sure the end of the tube is cut off square. Before flaring, make sure the die clamp is
More informationISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK ISSUE MODIF. ORDER NO. WEEK 01 SME SME SME
1. Summary The still pipe used with Rosemount 5900 LPG/LNG antenna is not supplied by RTR, but is to be manufactured by the customer according to the RTR drawing D9240041-910 or D7000001-466. Additional
More informationDehydrator Box Build Plan
Dehydrator Box Build Plan Cut Sheet Metal 1. Using a foot shear or similar tool, cut all the sheet metal components to the correct dimensions. For dimensions, refer to drawings LS-101F (Top/Side Panel)
More informationHolesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm
Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw
More informationSport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed
Assembly instructions Art.-Nr.: 201 0915 203 4502 Sport-Thieme Handball Goal, 3x2 m, Free-Standing or socketed 0218214 2018 Sport-Thieme GmbH D-38367 Grasleben Germany sport-thieme.com info @sport-thieme.com
More informationHeavy Duty Pipe Wrench
Heavy Duty Pipe Wrench High-tensile ductile iron handle and hardened tool-steel parts. Designed to withstand heavy demands. Easy-spin adjusting nut is heat-treated for durability. Drop-forged jaw is heat-treated
More informationTrade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2
Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2 Published by SOLAS 2014 Unit 4 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...
More informationMounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationConcealed Shallow tab 17.3 (.68) 11 (.44) 86 (3.38) 44 (1.72) 8 (5/16) Hex wrench opening (.252) 2 PL. Receptacle panel. Latch. panel Ø13 (.
22 R2 Draw Concealed Shallow tab High tensile Suited for thin panels Ø 5 (.196) (.).3 (.6).5 Average ultimate tensile : *13.5.5 Average ultimate shear : 900 N (2000 lbf) Install assembly with M5 (No. 10)
More informationZero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
More informationCONSTRUCTION MATERIALS SERVICE CONDITIONS. Alternative alloy materials, like AISI 904L or DUPLEX stainless steel, are available if required.
SLIDE GATE The model is a rectangular penstock suitable for wall and thimble mounting, with a resilient sealing member applied to all 4 sides. There are two different designs, which are size dependent,
More informationThe Point of Sale Cutting Tool Solution for Professionals
The Point of Sale Cutting Tool Solution for Professionals Professional Grade Cutting Tool for Professional Trades Champion s ipac system provides you with professional grade cutting tools in individual
More informationAir-supply elements. 5-2 MGE 13.1 Air-supply elements. 45x90. 45x90 (p. 2 41) Rexroth strut profiles can be used as compressed-air
5-2 MGE 13.1 Air-supply elements (p. 2 41) Air-supply elements Rexroth strut profiles can be used as compressed-air 19584 L L 2N L 3NVS (p. 2 40) 009732 L 7,9 cm 2 leads and reservoirs. The hollow chambers
More informationOperating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
More informationfor impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80
for impressive performances HYDRAULIC STEELWORKER Compact 50, 65, 80 HYDRAULIC STEELWORKERS COMPACT 50, 65, 80 The Compact 50, 65 and 80 are universal and compact hydraulic steelworkers. They are equipped
More informationFITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
More informationPAK Drum Roll Top Assembly Instructions. Note: 2 people will be required to assemble roll top
PAK901 4 Drum Roll Top Assembly Instructions Note: 2 people will be required to assemble roll top PLEASE READ ASSEMBLY INSTRUCTIONS CARFULLY Tools required: 5/8 Socket & Ratchet 9/16 Deep Well Socket &
More information+1-508-653-8897 800-992-4766 www.toolmex.com Dear Valued Customers, The TMX Team have broadened our line of round cutting tools and holders to ensure that you have the productivity tools that you need
More informationReed pipe tools and vises
Reed pipe tools and vises Reed have been producing fine tools for professional craftsmen since 1896. Reed engineers have developed many of the most innovative and effective tools in the industry - such
More information