ALFRA cutting devices
|
|
- Joella Emma Thompson
- 6 years ago
- Views:
Transcription
1 4 ALFRA cutting devices
2 For mounting rails Handle: reinforced - soft touch Limit stop with mm/inch laser-engraved Burr-free, precise 90 cuts Lowest-possible cutting play 4
3 ALFRA profile rail cutting device PSG Duo 4 Handle: reinforced - soft touch Limit stop with mm/inch laser-engraved separate profiles for burr-free precise 90 cuts - s profile guiding Profile throughput is optimised for lowest-possible cutting play Prod.-No
4 ALFRA profile rail cutting device PSG Duo For common mounting rails with hand lever operation Cuts both profile rails TS 5/ /5 mm precisely and without effort With guide support for 90 -angle precise cutting With reinforced cam located directly above the shear plate Lower force application due to improved force transmission table Maintenance-free Cutting to length without waste Shear plate re-grindable Anodised, laser-engraved longitudinal limit stop 000 mm with guidance fixture for precise angled cutting to length with millimetre and inch scaling. Easy to install on the workbench Prod.-No. 099 Scale divisions metric and inches Prod.-No. ALFRA profile rail cutting device PSG Duo 099 Profile rails Mounting rail 5 mm/7.5 as per EN Mounting rail 5 mm/5 as per EN Custom-made products for special profiles such as cable ducting on request! Your required profile made to drawings or samples 45
5 ALFRA profile rail cutting device PSG 4 Handle: reinforced - soft touch Limit stop with mm/inch laser-engraved Profile throughput is optimised for lowest-possible cutting play Prod.-No
6 ALFRA profile rail cutting device PSG 4 For hand-operated mounting rails Cuts profile and ground rails precisely and without effort. Standard version for TS 5/7.5-5/5-5/5.5 - Cu 0.0 x.0 mm With reinforced cam located directly above the shear plate Lower force application due to improved force transmission Burr-free cutting to length without waste Maintenance-free Anodised, laser-engraved length limit stop 000 mm with guiding device for precise angled cutting to length, with millimetre and inch scaling. Shear plate re-grindable Guidance fixture for 90 angle-precise cutting Easy to install on the workbench Custom-made products are also possible (please send us a sample rail of about 000 mm length). Prod.-No. ALFRA profile rail cutting device PSG Guidance fixture for 90 angle-precise cutting Standard version Mounting rail 5 mm/7.5 as per EN Mounting rail 5 mm/5 as per EN Prod.-No Mounting rail 5 mm/5.5 as per EN Copper ground rails 0 mm x mm 47
7 ALFRA profile rail cutting device PSG 5+ Handle: reinforced - soft touch Limit stop with mm/inch laser-engraved compatible with PSG series Profile throughput is optimised for lowest-possible cutting play Prod.-No
8 ALFRA profile rail cutting device PSG 5+ For mounting rails, for hand lever operation for cutting to length and hole punching longitudinally and transversely on the depicted mounting rails. With reinforced cam located directly above the shear plate Lower force application due to improved force transmission Burr-free cutting to length without waste Maintenance-free Anodised, laser-engraved length limit stop 000 mm with guiding device for precise angled cutting to length, with millimetre and inch scaling. Shear plate can be re-ground, punch replaceable Custom-made products are also possible (please send us a sample rail of about 000 mm length). Scope of delivery standard version Prod.-No. with transverse and longitudinal hole punch x 6.4 mm, mm length limit stop and guidance fixture incl. C-profile 45 with transverse and longitudinal hole punch x 6.4 mm, 000G 000 mm length limit stop and guidance fixture incl. G-profile as per EN 6075 as 000, however with round hole punch Ø 5.5 or 6.0 mm 000 as 000, however with hydraulic cylinder 000 Tool for fixing holes (longitudinal and transverse) integrated. Guidance fixture for 90 angle-precise cutting Prod.-No. 000 Standard version Mounting rail 5 mm/7.5 as per EN 6075 Mounting rail 5 mm/5 as per EN 6075 C-profile 45 (included in Prod.-No. 000) G-profile as per EN 6075 (included in Prod.-No. 000G) Mounting rail 5 mm/5.5 as per EN 6075 Copper ground rails 0 mm x mm Spare parts for universal cutting and punching device Prod.-No. Spare punch + die x 6.4 mm f. longitudinal hole 0005 Spare punch + die x 6.4 mm f. transverse hole 0006 Spare punch + die 5.5 mm f. round hole 0007 Spare punch mm f. round hole 0008 Special versions for mounting rails or flat rails, 00 also in stainless steel or aluminium or plastic on request Prod.-No. 000 We recommend our pump type AHP S (Prod.-No. 0854) as a drive 49
9 ALFRA cable ducting cutting device VKS Enlarged opening height (also suitable for ducting with special webs) Full-surface supporting table (no sagging ducts) Length stop laser-engraved in metric/inch Ergonomic hand lever for optimum force transmission Foldable, sprung cutter protector 5 50
10 ALFRA cable ducting cutting device VKS 5 ALFRA cable ducting cutting device VKS 5 Cuts cable ducting and covers up to 5 mm wide in seconds precisely and without effort. Fixing tabs for easy fitting to the Workbench are attached to the device and to the longitudinal limit stop. The VKS 5 is fitted with a sprung cutter protector which covers the cutter when it is not being used. Burr-free cutting to length without waste 90 angle-precise cutting Maintenance-free Easy to install on the workbench " no more plastic swarf and no more deburring!" Prod.-No. ALFRA VKS Cutter for VKS
Cutting. Contents. Cutting. Cutting Introduction B.2 B.1. Cutting tools B.4. Front cable cutter B.6. Cable cutter B.7. Cutting and releasing tools B.
Contents Introduction.2 tools.4 Front cable cutter.6 Cable cutter.7 and releasing tools.9 Mounting rail cutter.11 Sheet holes.12 Electrician s knives/electrician s scissors.14.1 Introduction A large number
More informationALFRA PRESS. Made in Germany by ALFRA
52 ALFRA PRESS Made in Germany by ALFRA 53 ALFRA PRESS Overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 56 Page 58 Control cabinet housing, control cabinet doors, mounting plates Control cabinet housing,
More informationSAWS, PIPE CUTTERS. Design. Blade
SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting
More informationQuality tools and machines 100 Part A
w w w. a l f r a. d e Punching Drilling Cutting Deburring Quality tools and machines 100 Part WELCOME! We take pride in our achievement - over 60% in-house manufacturing in four locations in Germany and
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationBedienungsanleitung - Operating Instructions - Mode d emploi
Bedienungsanleitung - Operating Instructions - Mode d emploi LAMINATED BUSBAR MACHINING UNIT 2017 Alfra GmbH II. Industriestraße 10 D-68766 Hockenheim Tel.: +49 (0)6205-3051-0 Fax: +49 (0)6205-3051-150
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationCutting. Contents. Cutting. Cutting B.1. Introduction B.2. Cutter B.4. Front cable cutter B.6. Cable cutter B.7. Cutting and releasing tools B.
Contents Introduction.2 Cutter.4 Front cable cutter.6 Cable cutter.7 and releasing tools.10 Terminal rail cutter.11 Electrician s knives.12 Electrician s scissors.13.1 Introduction A large number of cables
More informationALFRA hole punches application overview
ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F
More informationOperating Manual. for CUTTING, PERFORATING, BENDING SLB120
Operating Manual for CUTTING, PERFORATING, BENDING SLB120 31040\B06eng 0896 0 Contents 1. Scope of delivery... 1 2. Technical specifications... 1 3. Applications... 1 4. Commissioning... 2 5. Cutting...
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationPliers for Electrical Installation 13
Pliers for Electrical Installation 13 The all-rounder for professionals Multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, 6 functions in one
More informationElectrical height adjustment. ... easy & reliable. Multilift II telescope Multilift II. Synchron
Electrical height adjustment... easy & reliable 07/2017 Multilift II telescope Multilift II Synchron Preface The Multilift lifting column has been tried-and-tested over many years in many customer applications.
More informationCutting Tools. Rennsteig. Ten 47 Limited
+ Ten 47 Owner s Manual 4/8 Indent Crimping Tool MicroCrimp 8.78 Rennsteig Cutting Tools Ten 47 Limited Unit 2B Frances Industrial Park Kirkcaldy, Scotland, UK KY1 2XZ Tel: +44 (0)1592 655725 Fax: +44
More informationB/54. Ergonomically designed handle. Motor with highperformance. Continuously adjustable mitres up to 45 (with 5 locking positions)
Ergonomically designed handle Motor with highperformance gear box Continuously adjustable mitres up to 45 (with 5 locking positions) Solid base plate Automatically retracting blade guard /54 ALFRA RotaSpeed
More informationAGRICULTURE RANGE. KNIPEX CoBolt Compact Bolt Cutters
AGRICULTURE RANGE Fendt KNIPEX CoBolt Compact Bolt Cutters precision cutting edges for soft and hard wire as well as piano wire cuts components like bolts, nails, rivets, etc. up to 5.2 dia. exceptional
More informationPRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs
KOPAL PRESENTATION Vertical pressure clamping System KOPAL With neither riser block nor adjusting required, the system allows a continuous adaptation of the clamping height whilst retaining the clamping
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationNEWS KNIPEX Quality Made in Germany
NEWS 2014 KNIPEX Quality Made in Germany Product videos KNIPEX Pliers Wrench XL Pliers and a wrench in a single tool The unique installation tool now also in 400 length. For opening widths up to 85 / 3
More informationUnrivalled cutting performance
PLIERS Perfect material processing CIMCO pliers perform brilliantly in punishing everyday use. Both material and design are designed for a tough workload. The high-alloy steels used are specially designed
More informationQuality Normal steel chrome-plated, Scale glare-free matt-chrome-plated. Quality Normal steel chrome-plated, Scale glare-free matt chrome-plated.
37006 Bevel protractors 0 - With degree graduation 0-180 and locking screw Normal steel chrome-plated, Scale glare-free matt-chrome-plated. 37006 Measuring/ Arc Ø Blade length 37006 80 120 101 120 150
More information25 mm 2 stranded 35 mm 2 flexible Aluminium cable
6 A multitude of cables and conductors of the most diverse types and versions are used to connect electrical and electronic components. The cables and conductors must be accurately prepared depending on
More informationDRILL GRINDING ATTACHMENT
DRILL GRINDING ATTACHMENT To suit TM6025Q TOOL AND CUTTER GRINDER OPERATION S MANUAL 1 0º 270º 90º 180º INTRODUCTION Before grinding any cutters, you must set up the attachment to suit the type of cutter
More informationPliers Assortments. 207 Pliers Assortment 207 Pliers Assortment, 3-pieces 207 Pliers Assortment, 4-pieces
Content Pliers. Page Article group Page Article group Heavy Duty Combination Pliers. 197 Heavy Duty Combination Pliers 198 Long Round Nose Plier 198 Long Flat Nose Plier 198 Chain Nose Pliers, straight
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationINTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
More informationDesign for Manufacturability Guide
Design for Manufacturability Guide WHO WE ARE Short-to-medium run metal stamping manufacturer Annual volume of 250 to 300,000 per part number We serve a very diversified mix of customers & markets Our
More informationKKS Circular Sawing Machines
If Steel is Your Deal! KKS Circular Sawing www.kaltenbach.com 1 The complete KALTENBACH program for metal processing 2 www.kaltenbach.com 3 The Economical One Applications: locksmith s shop, metal construction,
More informationCutting and stripping tools
Cutting and stripping tool 0.02 - mm² (16 mm²) 2 Stripping tool for cables Ø 2.5-40 mm 3 Tools for cutting and stripping of conductors 0.5-6 mm² and for cutting up to Ø 20 mm 4 Cutting tools for cables
More informationArticle Group 5 Chisel and Hammers
Article Group 5 Chisel and Hammers 511002 Body separation chisel 512001 Body separation chisel incl. Hand protection 518001 Hand protection for body separation chisel 511020 Bumping hammer 300g 511021
More informationLIERS P
70 73 80 85 87 91 95 96 P LIERS 97 99 100 101 103 104 105 71 BOST pliers Flanged trivet Master clearance. Shot-blasted finish Transparent anticorrosion varnish. Very high reliability of the unlimited use
More informationPRESS & PRESS WORK
Topic and Contents Hours Marks 2.1 Introduction 08 Marks Materials used in press work for automobile applications. Classifications of presses and terminology used in presses Major parts of Fly press 2.2
More informationNew Products. KNIPEX Quality Made in Germany. KNIPEX-Werk C. Gustav Putsch KG. Your distributor. Oberkamper Strasse Wuppertal (Germany)
KNIPEX Quality Made in Germany Your distributor L100 02090/01/02.10/9.000/EN KNIPEX-Werk C. Gustav Putsch KG Oberkamper Strasse 13 42349 Wuppertal (Germany) Tel.: +49 (0) 202 47 94-0 Fax: +49 (0) 202 47
More information$ incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail $ Filip De Vis Cell: Tel:
The first metal circular saw with 4 3/4 cutting depth (on guiderail) $ 999.00 incl. Ø 12 5/8 /84T HM saw blade and 4 ft 7 guiderail Ref. 608270USET $ 899.00 incl. Ø 12 5/8 /84T HM saw blade Ref. 608270US
More informationBurnishing machine TRINOXFLEX Set. BSE Set
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 25899 Burnishing machine TRINOXFLEX Set BSE 4-3 00 Set 433.438 Power input 400 watt Power output 880 watt Max. tool Ø 25 Tool width 00 Tool
More informationProfiform 200 Profiform 320. Operating manual
Profiform 200 Profiform 320 Operating manual Profiform 200 / Profiform 320 Operating manual Page 1 Table of contents 1. General information Page 2 2. Profile of the Profiform sheet metal working machines
More informationWEBER Grinding Machines
HEAVY PLATE MACHINING WEBER Grinding Machines Grinding, rounding, deburring and descaling of fl ame-cut and plasma-cut parts 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationPrecision and high repeat accuracy for individual parts and small series manufacture. Made in Germany.
PROXXON - PD 400/CNC 1 Precision and high repeat accuracy for individual parts and small series manufacture. Made in Germany. Z-axis and X-axis with recirculating ball spindles and two powerful step motors.
More informationTHIN SHEET AND HEAVY PLATE MACHINING. WEBER PT Grinding Machine A new dimension of grinding, rounding deburring and descaling
THIN SHEET AND HEAVY PLATE MACHINING WEBER PT Grinding Machine A new dimension of grinding, rounding deburring and descaling 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationHeavy duty profiles. Heavy loads with maximum stability. Profile general overview... p Heavy duty profiles... S Load data... p.
Heavy loads with maximum stability Profile general overview... p. 366 Heavy duty profiles... S. 368 Load data... p. 372 Connection techniques... p. 374 Accessories... p. 384 Heavy duty profiles 365 Heavy
More informationCordless slitting shear C 200. Always a good cut. Machine tools / Power tools Laser technology / Electronics
Cordless slitting shear C 200 Always a good cut Machine tools / Power tools Laser technology / Electronics 2 Field of application Perfect for spiral ducts The powerful TruTool C 200 Li-Ion slitting shear
More informationRittal Automation Systems We automate panel building
Rittal Automation Systems We automate panel building 2 Perforex Machining Rittal Automation Systems Machining Perforex machining centers BC...8 Perforex laser center LC...10 Secarex AC 18 cutting center...12
More informationSUMMARY. V-Lock SYSTEM BASIC ELEMENTS ACTUATORS. P V-Lock GENERAL INTRODUCTION 2. P V-Lock FIXING ELEMENTS 10 SUMMARY. P V-Lock ADAPTORS 17
SUMMARY A3 V-Lock SYSTEM P V-Lock GENERAL INTRODUCTION 2 BASIC ELEMENTS P V-Lock FIXING ELEMENTS 10 P V-Lock ADAPTORS 17 SUMMARY P PROFILES 28 P V-Lock ACCESSORIES AND SPARE PARTS 32 1 A3 GENERAL INTRODUCTION
More informationBending-Bevel-Tools EcO-Benders
Bending Material fast and perfect. On site or in the work-shop. Bending-Bevel-Tools EcO-Benders EcO-Bender3 Your efficient little helper on site Light weighted, with 4 guide rollers and removable ergonomic
More informationSENA INSTRUCTION MANUAL
SENA INSTRUCTION MANUAL CONTENTS: 1 PRESENTATION AND GENERAL ASPECTS... 2 1.1 GENERAL POINTS... 2 1.2 TRANSPORT AND PACKING... 2 1.3 IDENTIFICATION LABEL... 2 2 CHARACTERISTICS OF THE MACHINE... 3 2.1
More informationXI. Rotary Attachment Setups
XI. Rotary Attachment Setups 1) Turn off the laser. 2) Put the rotary attachment onto the engraving table. Ensure the two screw holes on right side of rotary attachment match the two corresponding holes
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 Parts up to 8 meters wide, of any length
More informationPBA. CNC panel processing center. Innovation in timber engineering. Complete processing of Glulam structures, solid wood panels and SIPS and CLT
Innovation in timber engineering CNC panel processing center PBA Complete processing of Glulam structures, solid wood panels and SIPS and CLT www.hundegger.com 2 3 Parts up to 8 meters wide, of any length
More information4. PRESS AND PRESS WORK
4. PRESS AND PRESS WORK Q. Which are the materials used for press work? GALVANISED IRON Zinc-coated iron is known as "galvanised iron"'. This soft steel sheet is popularly known as Gl sheet. Applications:
More informationTesting burning behaviour KNIPEX uses only flame-resistant and self-extinguishing plastics for insulation.
Testing electrical insulation After submersion in water for 24 hours, the tools are tested with AC 10,000 V for 3 minutes including measuring of the leakage current. The reading of the leakage current
More informationCutting. Contents. Cutting. Cutting B.1. Introduction B.2. Cutter B.4. Front cable cutter B.6. Cable cutter B.7. Cutting and releasing tools B.
ontents utting utting utting Introduction B.2 utter B.4 Front cable cutter B.6 B able cutter B.7 utting and releasing tools B.10 Terminal rail cutter B.11 Electrician s knives B.12 Electrician s scissors
More informationElectronic-Tools ESD
Electronic-Tools ESD 1 EPA 69OO ELECTRONIC SERVICE CASE The service case made from conductive material for maintenance and installation tasks in ESD protected areas with a full assortment of special ESD-tools.
More informationOpen Up Your View With CABLE SYSTEMS
Open Up Your View With CABLE SYSTEMS PRESENTED BY CROWN HERITAGE Our Cable Multiple options to accomodate any deck or stair design Marine Grade 316 stainless steel Swaging is the term used for attaching
More informationENGLISH (mm) BENDICROP SERIES
ENGLISH (mm) BENDICROP SERIES BENDICROP SERIES Metalwork companies need to perform simple bending work. GEKA has designed the BENDICROP MODELS which, apart from including L, B, A, I, cutting stations,
More informationww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE
ww w.jbctools.com CATALOGUE CLASSIC Series 12.0 THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 the power of experience More than 80 years of
More informationStrip straighteners. Strip spectrum The following coil strips can be processed using our straightening
STRIP STRAIGHTENERS Strip straighteners SOPREM Precision Straighteners ensure your product quality. Distorted metal components are a thing of the past; today quality products are processed regardless of
More informationZ Order-No ½ ½ x
www.wiha.com Safety note: When working with cutting pliers beware of wire ends flying away. Please wear safety glasses. Combination pliers and high-leverage combination pliers. Needle nose pliers with
More informationGENERAL CATALOGUE. Connectivity for workplaces
GENERAL CATALOGUE Connectivity for workplaces CONTENTS GENERAL 2 General Catalogue Connectivity for workplaces WORKPLACE SOLUTIONS SIMON 500 CIMA SIMON K45 SIMON TRUNKING p. 4 p. 86 p. 150 SIMON ELECTRICAL
More informationPrinting on Corrugated Board
Printing on Corrugated Board Presented by Sanjay Bhotra Novel Packagig 41/2,b/2, vadgaon sheri, Off nagar road, pune 411014 Tel : (020)27030569,27031466 E- mail : novelpackaging@gmail.com Different types
More informationDICTATOR RTS Tube Door Closer
Tube Door Closer RTS v long DICTATOR RTS Tube Door Closer The "Invisible" Door Closer The DICTATOR RTS tube door closer is built into the door and therefore is as good as invisible. The joint can only
More informationPolished head, handles black atramentised. Polished head, dip-coated handles. Length mm
575-576 Steel C 45, oil-hardened and tempered, Pincers (cutting pliers) DIN/ISO 9243 575 Polished head, handles black atramentised. 576 Polished head, dip-coated handles. 575 576 Length 575 576 16 11 18
More informationK12.12 SINGLE LOCKS SERIES 8600 K12 DOORS
K12 DOORS K12.12 01.02.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Door locks series 8600... K12.12.03 1.1.
More informationHigh-precision inch guide units Made in Germany
High-precision inch guide units Made in Germany cm 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 cm inch inch 1 2 3 4 5 6 7 8 STEINEL All you need for tools Your partner for punching and bending
More informationV Installation instructions, accessories. Auxiliary seat. Volvo Car Corporation Gothenburg, Sweden V70 (00-08) 2002
Installation instructions, accessories Instruction No 8624018 Version 1.3 Part. No. 30749269, 30749270, 30749271, 30749272, 30749273, 30749274 Auxiliary seat M8901699 Volvo Car Corporation Auxiliary seat-
More informationFibre-optic units SOE4
Product overview Product overview Version Type Type of display Timer function Switching output Analogue output Page/Internet Fibre-optic unit SOE4-FO-L LED PNP NPN SOE4-FO-D LED display 1 2000 ms PNP NPN
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More informationRODIA Diamond Core Drilling Hand-Operated and Stationary Wet Drilling
Hand-Operated and Stationary Wet Drilling RODIADRILL Ceramic ECO Hand-operated and stationary wet drilling machine, drill Ø 6-67 mm Further developed for hand-operated and stationary wet drilling in the
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More informationCATALOG CLASSIC Series 15.0
www.tekserve.com.tw CATALOG CLASSIC Series 15.0 ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 The power of experience More than 80 years of experience have placed
More informationEmpty enclosures AKL / AKi ITC - AKL / AKi Enclosures
4 basic enclosures up to 600 x 300 mm, with two different cover heights Box: choice of polystyrene (AKL) or glassfibre-reinforced polycarbonate, grey, similar to RAL 7035 Cover: grey (polystyrene or polycarbonate)
More informationCARBIDE CUTTER SETS INCLUDING 7/8-2 1/2. Professional. Nothing Less. GREENLEE S CARBIDE CUTTERS CONTINUE TO DELIVER THE LOWEST COST PER HOLE!
CARBIDE CUTTER S INCLUDING 7/8-2 1/2 Professional. Nothing Less. GREENLEE S CARBIDE CUTTERS CONTINUE TO DELIVER THE LOWEST COST PER HOLE! EVERYTHING YOU NEED TO GET THE JOB DONE Complete solutions for
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range Ecotronic ESD Pliers Catalogue number T3883, T3884, T3885, T3886, T3887, T3888, T3889, T3890, T3891, T3892, T3893, T3894, T3895 Date 20/03/2015 Range Description
More informationthe reliable allrounders.
Powerful solutions passionate people the reliable allrounders. the KKS series semi-automatic universal mitring circular saws > MADE IN GERMANY REQUIREMENTS MAY CHANGE WITH TIME. BUT REAL QUALITY IS ALWAYS
More informationPROMPT TRADING CO. Ph. No.: FOR RESCUE
FIRED UP FOR RESCUE 78 When it comes to rescuing life and limb, every movement must be just right. This day. Any obstacles in their way, such as a locked access point, present an immediate danger to those
More informationBevelling made easy. SKF AutoCUT EKF EKF EKF EDGE PROCESSING MACHINES
82 Bevelling made easy BDS offers a range of professional machines for easy and perfect processing of milling edges: For the preparation of welding seams with the fully automatic AutoCUT 500 or the manually
More informationPRODUCT CATALOG CHINA. Plastic Recycling Solutions MADE IN
PRODUCT CATALOG MADE IN CHINA Plastic Recycling Solutions COMPANY PROFILE POKS Machinery is one of the leading machine manufacturers for plastic recycling in China. Our highly satisfied customers are spread
More information85 Smart Grip, the Water Pump pliers with automatic adjustment
85 Smart Grip, the Water Pump pliers with automatic adjustment patented DIN ISO 8976 The adjustment procedure to match with the workpiece acts self-controlled with the SmartGrip. Position the pliers, press
More informationPliers VDE. Verbindungen mit System The Power of Partnership
Pliers VDE Verbindungen mit System The Power of Partnership Pliers VDE VDE Cable cutter for NYM and NYY cable fully insulated suitable for Cu and aluminium cable opening up to 16 mm 160 KL010160IS 225
More informationShear force transmission in expansion joints
for better solutions Shear dowel Shear force transmission in expansion joints Reliable expansion joint dowelling in concrete structural elements General Single shear dowel HED Expansion joint dowelling
More informationQUICK, FLEXIBLE AND COPLANAR
EASY-CLAMPING BASE BENEFITS» quick adaption» modular clamping system for various combinations» use with standard clamping systems Easy-clamping base M Easy-clamping base L Easy-clamping base XL QUICK,
More information3. Barrier elements. Barrier posts. Stainles steel
3. Urban Equipment Building Equipment Stainles steel e 3.1 Tubular hoops 216-223 3.2 Access barriers 224-227 3.3 Height restriction barriers 228-231 3.4 Protective railing 232-237 3.5 City fence 238-240
More informationPipe wrenches Tube cutters Bench yoke vices. Three stands Other plumbing tools Sets of pipe wrenches. Ergonomic shape
Plumbing tools Pipe wrenches Tube cutters Bench yoke vices Three stands Other plumbing tools Sets of pipe wrenches Numerous additional parts The range of pipe wrenches is complemented by other tools dedicated
More informationDiagonal Cutters for plastics DIN ISO
Diagonal Cutters for plastics DIN ISO 5746 72 > cutting face flush ground > for nearly flush cutting of moulded plastic components from sprues > cuts soft materials such as lead in a flush cut > with opening
More informationCATALOGUE CLASSIC Series THE POWER OF EXPERIENCE
CATALOGUE CLASSIC Series THE POWER OF EXPERIENCE ESD safe All JBC products comply with EC regulations, and the ESD recommendations. 2 More than 80 years of experience have placed JBC at the technological
More informationWRIST ARTHROSCOPY SYSTEM
DESCRIPTION 1 1 lot 10,648,751.67 Brand new, not reconditioned including its Parts & Accessories 1. Wrist Arthroscope a. HD wide angle 30-degree small joint arthroscope i. One (1) short scope (1 piece)
More information03 Pliers and cutters
0 Pliers and cutters Heavy-duty combination pliers 47 Combination pliers 48 Water pump Cutting pliers 49 50 pliers Insulated pliers 51 Circlip pliers 54 ocking pliers 55 Mini pliers 56 Pincers 58 Bolt
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationEPA 69OO ELECTRONIC SERVICE CASE. The service case for maintenance and installation tasks in ESD protected areas
EPA 69OO ELECTRONIC SERVICE CASE The service case for maintenance and installation tasks in ESD protected areas 2 EPA ELECTRONIC SERVICE CASE The service case made from conductive material for maintenance
More informationProtractors / Clinometers / Spirit levels
Protractors / Clinometers / Spirit levels Accuracy of clinometers/spirit levels according DIN 877 Graduation Flatness (µm) µm/m " (L = length in ) 50 10 4 + L / 250 > 50-200 > 10-40 8 + L / 125 > 200 >
More information# in 1 Metal Worker Auxiliary Operating Instructions
340 Snyder Avenue, Berkeley Heights, NJ 07922 www.micromark.com MMTechService@micromark.com Tech Support: 908-464-1094, weekdays, 1pm to 5 pm ET #86556 3 in 1 Metal Worker Auxiliary Operating Instructions
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationPole Mount Installation Manual
Pole Mount Installation Manual Thank You for Choosing AIMS Power! 1. AIMS Power is a leading supplier of solar products, specializing in PV mounting systems. We ensure our products are manufactured to
More informationAngled combination pliers
COMBINAION LIES 8248 Angled combination pliers Specially offset teeth in the grip surfaces for best-possible gripping on pipes and screws A pliers head angled at 60 goes easy on your joints and tendons.
More informationPRODUCTION VISES. Vises. Bock Quick Change Fixturing. 5-Axis Production Vises
Vises Introduction to Design... 74 75 VMC/HMC Solutions...76 77 Ball Lock Mounting System...78 79 Production Vises 4" (100 mm) Production Vises... 80 81 6" (150 mm) Production Vises...82 83 Self Centering
More informationWe are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation
We are specialized in steel processing, especially for home appliances and the furniture field, from design to manufacturing and installation MEP towards INDUSTRY 4.0 We have launched an investment plan
More informationaluminium profile system
aluminium profile system 63 AME System aluminium profiles overview series profiles introduction 80x80 x80 x80/180 x Aluminium profiles are provided with longitudinal grooves which can be used in conjunction
More informationIn hall 4, stand A42, you can experience Intelligence in Production. The following trade show highlights can be seen at EMO:
Guhring at EMO 2013 Intelligence in Production with precision tools from Guhring In the spirit of the motto of this year s EMO, from 16th to 21th September in Hanover, Guhring is introducing trendsetting
More information