RODIA Diamond Core Drilling Hand-Operated and Stationary Wet Drilling
|
|
- Milton Richard
- 5 years ago
- Views:
Transcription
1 Hand-Operated and Stationary Wet Drilling RODIADRILL Ceramic ECO Hand-operated and stationary wet drilling machine, drill Ø 6-67 mm Further developed for hand-operated and stationary wet drilling in the smallest drilling range Drills in all the hardest materials such as tile, natural stone, concrete, glass and ceramic Especially recommended for high-quality bathroom installations without damaging surface materials Water extraction is possible with the stand guided drill With drill stand ( FF FF30171), stationary drilling is possible! Quick Change System drill bit adaptor Toolless quick change for drill bits G 1/ Ø 67 Please pay attention to special characteristics / advantages on page 34! Ø 56 mm clamping adaptor For stationary drilling Integrated water flow socket with Aquastop and adjustable water tap Ideal solution for serial drillings You will find special drill bits for RODIADRILL Ceramic on page 45! Quick change adaptor Drill bits HSP natural stone Stationary drilling Set ( FF40140) includes: Drill motor RODIADRILL Ceramic ECO ( FF40140), spanner sizes 4 and 7 ( FF7004, FF7007), Quick change adaptor G 1/, ( FF35751), transport case ( FF60150) RODIADRILL Ceramic ECO set 3. FF40140 RODIACUT drill stand 170 PRO 10.0 FF30171 Quick change adaptor G 1/ 0. FF35751 Pressurized water container 10 l 5.5 FF3506 ACCESSORIES Description Description Freehand drill support up to Ø 83 mm 0.45 FF35750 Water supply hose with aqua-stop 0.0 FF3530 Quick change adaptor 0.0 FF35751 Water collection ring, hand-operated 0.80 FF35701 Pressurized water container 10 l 5.50 FF3506 Water collection ring, stationary 1.0 FF35700 Special water supply hose 0.0 FF35301 Transport case RODIADRILL Ceramic ECO 4.80 FF60150 Drill Bit High-Speed-Plus Natural Stone 45 35
2 Hand-Operated and Stationary Drilling Drill Stands Feed Units Drill Motors Diamond Drilling System 130 PRO RC 130 PRO Ceramic ECO RODIACUT 130 PRO /1800 DWS 170 PRO C/D RC 170 PRO RODIACUT 170 PRO C / PRO D 38, 39 38, DRY 38, 39 RODIACUT 70 PRO C / PRO D RC 70 PRO 70 PRO C/D PD-E 40, 41 40, 41 40, 41 40, 41 RODIACUT 400 PRO D 400 PRO D RC 400 PRO 3000 PD 4, 43 4, 43 4, 43 4, 43 36
3 Hand-Operated and Stationary Drilling RODIACUT 130 PRO Drilling system with dowel plate, drill Ø mm Ideal for use in HVAC&R, plumbing and electrical industries, as well as the entire building industry where jolt and dust-free operation is required. APPLICATION AREA Stationary wet drilling in (reinforced) concrete Stationary dry drilling in masonry Hand-operated wet drilling in (reinforced) concrete Hand-operated dry drilling in masonry KEY FEATURES Ø mm Ø 3-16 mm Ø 10-8 mm Ø 3-00 mm Low vibration drilling with the 4x roll guides Stainless-steel handle can be exchanged without tools Exchangeable rack and guide rail Stable threaded connection between column and base plate Transport handle Lockable feed unit Product Profile Universal feed unit, also with RODIACUT 170, 70 and 400 Pro Ø 60 mm clamping neck adaptor TECHNICAL DATA (DRILL MOTOR) Ø 00 The light weight and toolless operation allows an easy one-man operation and makes this unit a must on every construction site. Drill motor: RODIADRILL 1400 DWS in concrete max. Ø 13 mm in brickwork Ø 16 mm Min. distance to wall: 40 mm from drill hole centre Min. distance to corner: 40 mm from drill hole centre G 1/ and 1.1/4 UNC Rated input / output:,000 Watt / 1,400 Watt -speed transmission: 1. Gear. Gear Nominal speed: 500 rpm 1,050 rpm Torque: 55-7 Nm Charging rate: 8.5 A Motor 6.7 Clamping neck: Ø 60 mm Ideal for difficult spaces G 1/ and 1.1/4 UNC! Feed unit and 4x guide rollers Dowel plate: Extremely small dimensions, for very tight spaces Circular level: Quick and precise alignment of the drill stands Universal use with RODIACUT 170, 70 and 400 PRO Stainless-steel handle Quick, toolless exchange of the operational side, sturdy design Scope of Delivery ( ): Drill stand RODIACUT 130 PRO, drill motor RODIADRILL 1800 DWS, spanner size 19/4/36/41, water supply hose ( FF3530), complete concrete set ( FF3510), copper ring 1.1/4 ( FF35190), instruction manual RODIADRILL 1800 DWS ( 90704), instruction manual RODIACUT 130 PRO ( ), tool bag ( FF70001) RODIACUT 130 PRO set with RODIADRILL drill motor 1800 DWS RODIACUT 130 PRO set with RODIADRILL drill motor 1400 DWS Drill stand RODIACUT 130 PRO RODIADRILL drill motor 1400 DWS 6.7 FF40160 Drill bits on 44
4 Hand-Operated and Stationary Drilling RODIACUT 170 PRO C / 170 PRO D Drilling system with dowel- or vacuum combination plate, drill Ø mm APPLICATION AREA 4 Applications with just one unit: Stationary wet drilling in (reinforced) concrete Ø mm Stationary dry drilling in masonry Ø 3-17 mm Hand-operated wet drilling in (reinforced) concrete Ø 10-8 mm Hand-operated dry drilling in masonry Ø 3-00 mm KEY FEATURES Product Profile Universal feed unit, can also be used with RODIACUT 70 PRO and 400 PRO with the 4x guide rolls Drill angle adjustment from -15 up to +45, in.5 adjustable steps Quick display of the drill hole centre (only with combination plate) TECHNICAL DATA (DRILL STANDS) w/o water collection ring: max. Ø 17 mm with water collection ring: max. Ø 13 mm Drill motor adaptor: Ø 60 mm 170 PRO C 170 PRO D Length 470 mm 315 mm Width: 300 mm 180 mm Height: 860 mm 860 mm Hub: 55 mm 55 mm Ø 00 TECHNICAL DATA (DRILL MOTOR) Drill motor: RODIADRILL 1800 DWS in concrete max. Ø 17 mm Freehand: in masonry max. Ø 00 mm Min. distance to wall: 40 mm from drill hole centre Min. distance to corner: 40 mm from drill hole centre G 1/ and 1.1/4 UNC Rated input/output:,500 Watt / 1,800 Watt speed transmission: 760-1,570 rpm Torque: 58-7 Nm Charging rate: 8.5 A 7.0 Clamping neck: Ø 60 mm Sliding carriage on all RODIACUT PRO drill stands and columns Stable and low-vibration operation, flexible use / modular design Rubber transport wheels Quick and easy transport on the building site (standard with combination plate) With integrated vacuum plate / valve and 4 adjustable screws to level out unevenness High-quality drill base Drill angle adjustment Adjustable from -15 up to +45 in.5 steps Drill hole centre indicator Quick adjustment for an exact drilling position 38
5 Hand-Operated and Stationary Drilling CHARACTERISTICS 170 PRO C and 170 PRO D Available with both drill stands: Precise and vibration free drilling with the 4x roll guides Stainless steel handle, can be changed without tools Exchangeable rack and guide rail Stable threaded connection between column and base plate Transport handle Lockable feed unit Drill depth measuring scale Ø 60 mm clamping neck adaptor ADDITIONAL CHARACTERISTICS 170 PRO C Second transport handle Vacuum plate Vacuum valve Transport wheels Drill hole centre indicator Stainless steel handle Toolless quick change for the operating side, sturdy design Feed unit and 4x roll guides Universally applicable on RODIACUT 130, 70 PRO and 400 PRO Clean work in enclosed rooms Scope of delivery ( FF34171 / FF34170): Drill stand RODIACUT 170 PRO C or 170 PRO D, drill motor RODIADRILL 1800 DWS, spanner sizes 19/4/36/41, Allen key 6 mm, water supply hose ( FF3530), concrete set, complete ( FF3510), copper ring 1.1/4 ( FF35190), Instruction manuals: RODIADRILL 1800 DWS ( 90704), RODIACUT ( 9076), tool bag ( FF70001) Fig. 170 PRO C Fig. 170 PRO D ACCESSORIES RODIACUT 170 PRO C complete 0.1 FF34171 RODIACUT 170 PRO D complete 19.8 FF34170 RODIADRILL 1800 DWS 7.0 FF40180 Drill column RODIACUT 170 PRO C 13.1 FF30171 Drill column RODIACUT 170 PRO D 1.8 FF30170 Drill column 860 mm, Hub 55 mm 7.6 FF50978 Drill column 1335 mm, Hub 1000 mm 1.4 FF50981 Drill column 1835 mm, Hub 1500 mm 16.5 FF5098 Feed unit for RC 170 PRO 3.1 FF50977 Anchor foot for RC 170 PRO 3.3 FF50979 Description Description RODIADRILL CERAMIC ECO 35 FF40150 RODIA DRY CLEANER FF35148 RODIADRILL 1800 DRY 33 FF40185 Water collection ring, hand-operated 5 FF35701 Pressurized water container 10 l 51 FF3506 Water collection ring, stationary (for FF30171) 5 FF35700 Vacuum pump RODIA-VAC 49 FF3500 Drill bits
6 RODIA Diamond Core Drilling Stationary Drilling RODIACUT 70 PRO C / 70 PRO D Drill stand with dowel- or vacuum combination plate drill Ø 3-50 mm APPLICATION AREA applications in one unit: Stationary wet drilling in (reinforced) concrete Stationary dry drilling in masonry KEY FEATURES Product Profile Ø 3-50 mm Ø 3-50 mm Universal feed unit, can also be used with RODIACUT 130, 170 PRO und 400 PRO Drill angle adjustment from -15 up to +45, in.5 adjustable steps Drill hole centre indicator (70 PRO C) for quick alignment TECHNICAL DATA (DRILL STANDS) w/o water collection ring: max. Ø 50 mm with water collection ring max. Ø 0 mm Drill motor adaptor: Direct adaptor for feed unit 70 PRO C 70 PRO D Length: 50 mm 330 mm Width: 330 mm 0 mm Height: 980 mm 980 mm Hub: 595 mm 595 mm Ø 50 TECHNICAL DATA (DRILL MOTOR) Drill motor: RODIADRILL 400 PD-E in concrete max. Ø 50 mm in masonry max. Ø 50 mm Min. distance to wall: 50 mm from drill hole centre Min. distance to corner: 50 mm from drill hole centre G 1/ and 1.1/4 UNC Rated input/output: 3,000 Watt /,400 Watt 3 speed transmission: ,10 rpm Torque: Nm Charging rate: 14.9 A 9.0 4x roll guides Precise and low vibration operation, flexible use / module concept Sliding carriage can be used on all RODIACUT PRO drill stands and columns Toolless quick mounting/demounting of drill motor on drill stand Rubber transport wheels Quick and easy transport on the building site With integrated vacuum plate / valve and 4 adjustable screws to level out unevenness High-quality drill base Drill angle adjustment Adjustable from -15 up to +45 in.5 steps Drill hole centre indicator Fast alignment of the drill hole centre 40
7 Stationary Drilling CHARACTERISTICS 70 PRO C AND 70 PRO D Standard with both drill stands: 4x roll guides for precise and low-vibration drilling Stainless steel handle, can be changed without tools Exchangeable rack and guide rail Stable threaded connection between column and base plate Transport handle Lockable feed unit Drill depth measuring scale ADDITIONAL CHARACTERISTICS 70 PRO C Second handle Vacuum plate Vacuum valve Drill hole centre indicator Stainless steel handle Toolless quick change for the operating side, sturdy design Feed unit Universally applicable on RODIACUT 170 PRO and 400 PRO Fig. Shows drill stand RODIACUT 70 Pro C with feed unit RC 400 and drill motor RODIADRILL 3000 PD Scope of delivery ( FF3471 / FF3470): drill stand RODIACUT 70 PRO C or 70 PRO D. drill motor RODIADRILL 400 PD-E. spanner sizes 19/4/36/41, water supply hose ( FF3530) complete concrete set ( FF3510) copper ring 1. 1/4 ( FF35190) Instruction manuals RODIADRILL 400 PD-E ( 90705) instruction manual RODIACUT ( 9076) tool bag ( FF70001). Fig. 70 PRO C Fig. 70 PRO D ACCESSORIES RODIACUT 70 PRO C complete 5.8 FF3471 RODIACUT 70 PRO D complete 5.5 FF3470 RODIADRILL 400 PD-E 9.0 FF4010 Drill stand RODIACUT 70 PRO C 16.8 FF3071 Drill stand RODIACUT 70 PRO D 16.5 FF3070 Drill column 980 mm, Hub 595 mm 8.4 FF50985 Drill column 1385 mm, Hub 1000 mm 1.5 FF50988 Drill column 1885 mm, Hub 1500 mm 16.5 FF50989 Feed unit for RC 70 PRO 3.1 FF50984 Anchor base for RC 70 PRO 5. FF50986 Combination base for RC 70 PRO 7.7 FF50987 Angled support for RC 70 PRO anchor base.8 FF50990 Description Description RODIADRILL 3000 PD 4, 43 FF40300 Vacuum set 49 FF35740 Pressurized water container 10 l 51 FF3506 RODIA DRY CLEANER FF35148 Vacuum pump RODIA-VAC 49 FF3500 Water collection ring, stationary (for FF30171) 5 FF35730 Distance plate 15 mm FF35134 Extension 5 Distance plate 0 mm FF35139 Drill bits
8 RODIA Diamond Core Drilling Stationary Drilling RODIACUT 400 PRO D Drilling system with dowel plate, drill Ø (500)* mm APPLICATION AREA applications in one unit: Stationary wet drilling in (reinforced) concrete Stationary dry drilling in masonry KEY FEATURES Ø mm Ø mm Drill angle adjustments from -15 up to +45, in.5 steps adjustable Exchangeable guide rail TECHNICAL DATA (DRILL STANDS) Length: Width: Height: Hub: Product Profile w/o water collection ring: max. Ø 500 mm optional with distance plate mm 60 mm 1,100 mm 680 mm TECHNICAL DATA (DRILL MOTOR) Ø 400 (500) Drill motor: RODIADRILL 3000 PD in concrete max. Ø 500 mm in masonry max. Ø 500 mm Min. distance to wall: 50 mm from drill hole centre Min. distance to corner: 50 mm from drill hole centre G 1/ and 1.1/4 UNC Rated input/output: 4,000 Watt / 3,000 Watt 3 speed transmission: rpm Torque: Nm Charging rate: 0.0 A 1.1 4x roll guides Precise and low vibration operation, flexible use / module concept Sliding carriage can be used on all RODIACUT PRO drill stands and columns Toolless quick mounting/demounting of drill motor on drill stand *Distance plates optional ( FF35138) To enlarge the drill hole diameter from Ø 400 to 500 mm with RODIACUT 400 PRO Rubber transport wheels Quick and easy transport on the building site Drill angle adjustments Adjustable from -15 up to +45 in.5 steps 4
9 Stationary Drilling Characteristics 400 PRO D Standard with both drill stands: 4x roll guides for precise and low-vibration drilling Stainless steel handle, can be changed without tools Exchangeable rack and guide rail Stable threaded connection between column and base plate Transport handle Lockable feed unit Drill depth measuring scale Combination possibilities of the feed unit RODIACUT 170 / 70 / 400 PRO Feed unit can be used on all RODIACUT PRO drill stands and columns Toolless quick mounting/demounting of drill motor on drill stand FF50977 Gear reduction 1:3 Reduces the contact pressure of the drill bit FF50984 Stainless steel handle Toolless quick change for the operating side, sturdy design FF50993 Exchangeable guide rail / exchangeable rack / motor mounting Cost-saving spare parts Stable threaded connection Scope of delivery ( FF34300): Drill stand RODIACUT 400 PRO D, drill motor RODIADRILL 3000 PD, spanner size 4/36/41, water supply hose ( FF3530), hexagonal pin key ( 31300), concrete set, complete ( FF3510), RODIACUT 400 PRO D 40.5 FF34300 Drill stand RODIACUT 400 PRO D 8.4 FF30030 Drill column 1100 mm, Hub 680 mm 11.7 FF50995 Drill column 140 mm, Hub 1000 mm 16.1 FF50996 Drill column 190 mm, Hub 1500 mm 1.4 FF50997 Description Fig. 400 PRO D Copper ring 1.1/4 ( FF35190), Instruction manual RODIADRILL 3000 PD ( 9075), tool bag ( FF70001). Feed unit for RC 400 PRO D 5.1 FF50993 Angled support for RC 400 PRO D anchor base 3. FF50998 RODIADRILL 3000 PD 1.1 FF40300 ACCESSORIES Description Description RODIADRILL 400 PD-E FF4010 Distance plate 70 mm FF35138 Submergable water pump RODIAPUMP 51 FF3509 RODIA DRY CLEANER FF35148 Pressurized water container 10 l 51 FF3506 Mounting articles 50 Copper ring 1.1/4 50 FF35190 Extensions 5 Distance plate 50 mm FF35131 Drill bits Distance plate 60 mm FF
O NEof Premium tools for professionals!
O NEof 6.000 Premium tools for professionals! 36 RODIA Diamond Core Dilling System overview Diamond Core Drilling 38-39 Characteristics Diamond Drill Bits 40 Hand-Operated Drilling Wet Drilling Machine
More informationBBM 911. Dry drilling machine up to Ø 160 mm. hand guided. Versatile dry drilling machine for drilling up to Ø 160 mm
Dry drilling machine up to Ø 160 mm BBM 911 hand guided ADVANTAGES Sudden stop safety clutch Solid made housing, powder-coated die-cast aluminium for durability Versatile dry drilling machine for drilling
More informationCore drilling in steelreinforced. masonry etc. REMS Picus SR. for Professionals
Core drilling in steelreinforced concrete, masonry etc. REMS Picus SR for Professionals 2 One system 4 applications! Ideal for plumbers! 33 12 20 With speed regulation! 3 5 4 6 7 Patent EP 2 085 191 21
More informationChapter M03: Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates
Maschines and Accessories Chapter : Tile Cutting Machines, Saw Benches, Joint Cutters and Vibratory Plates Cutting Machines Tile Cutting Machines Core Drills Submersible Pumps Saw Benches Vibratory Plates
More informationD I A M O N D P U L S E - T E C H
D I A M O N D P U L S E - T E C H DIAMOND PULSE-TECH ADVANTAGES D I A M O N D P U L S E - T E C H YOU CAN WORK IN ANY ENVIRONMENT also in finished and furnished rooms because, by drilling in dry with dust
More informationHOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use
Mitre saws with pull function HOLZSTAR KGZ 305 E Mitre saw with pull function for versatile and mobile use Features soft start Base plate and rotating platen made of die cast aluminium, compact, rugged
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationDRILLING & SCREWDRIVING
Drywall Screwdriver DW274K/ DW274KN* Ideal for fastening drywall and panels to wooden or metal studs Removeable depth sensitive set and forget nosepiece for consistent fastener depth Soft grip surface
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationWET diamond core drills
73 WET diamond core drills DRY DIAMOND CORE wet core drills DRILLS INTRO WET diamond cores / drills / rigs wet core drill accessories core drill core drill rig core drill rig accessories BRICK / BLOCK
More informationProduct Overview. Electric Pneumatic Hydraulic. Concrete and Masonry Dust Collection Systems Hot Work Zone Tools
Electric Pneumatic Hydraulic Product Overview Metalworking Surface Finishing Surface Preparation Concrete and Masonry Dust Collection Systems Hot Work Zone Tools www.csunitec.com Metalworking In the shop
More informationFig. 2 DORMA-Glas Stand/Issue 02/03 Seite/Page 1/7
FSW Installation instructions Track rail 75 x 72 mm 1. Ceiling substructure and installation of the track rail (Fig. 1): The track rail must be bolted over its entire length (including the stacking track
More informationFLUSH-MOUNTED CIRCULAR SAWS
NO TEARS NO EFFORT. The basic principle is pulling instead of pushing. Those who have had to cut long, unhandy or particularly hard workpieces, know that pulling is easier and cleaner than pushing. Considerably
More information7. Operating instructions: EFL 300
7. Operating instructions: EFL 300 Copyright 2015 by Endecotts Ltd. 59 1. Setting up Technical specifications SIEVE SHAKER MODEL: EFL 300 General Information The new EFL 300 combines the best features
More informationBY LACKMOND TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS
TILE PRODUCTS AND SOLUTIONS EQUIPMENT ACCESSORIES DIAMOND TOOLS BEAST 10" WET TILE SAW BLADE SIZE: MOTOR CAPACITY: RIP CUT CAPACITY: DIAGONAL CUT CAPACITY: DEPTH OF CUT AT 90 : DEPTH OF CUT AT 45 : BEVEL:
More informationPerfect sawing. The complete FEIN program for sawing: Jigsaws P Hacksaws P With the FEIN sabre saw through thick and thin with ease.
FEIN Sawing 222 Perfect sawing. FEIN Jigsaws are characterised by their high performance under tough operating conditions. They saw vertically and horizontally in metal, wood and plastics (including fibreglass).
More informationPREMIUM CHOICE FOR 100% FLEXIBILITY
DIAMOND CORE DRILLS PREMIUM CHOICE FOR 100% FLEXIBILITY The construction industry demands greater flexibility and economy than practically any other sector. This applies to both civil and structural engineering,
More informationCHIP AND DUST EXTRACTION SYSTEMS
CHIP AND DUST EXTRACTION SYSTEMS For connecting to all wood processing machines Healthy air at the workplace: Clean air clean work High suction output Mobile use, easy to connect Large range of accessories
More informationWOOD PROCESSING TECHNOLOGY
WOOD PROCESSING 152 WOOD PROCESSING THEY HAVE ALREADY CONVINCED OVER 1 MILLION PROFESSIONALS WORLD-WIDE: METABO PORTABLE SAWS No matter which type of wood you are working with: The Metabo saw range offers
More informationCOFFEE LABORATORY WHITE STONE VA TEL
1. Technical specifications 4. Operating instructions: Octagon 200 Copyright 2015 by Endecotts Ltd. 21 1. Setting up Technical specifications SIEVE SHAKER MODEL: Octagon 200 General Information The sieve
More informationSADDLE BUDDY EASY ASSEMBLY. The Saddle Buddy is easy to install Galvanized Surface In-Ground. Rail.
SAD D L E B U D DY Saddle Up. Designed for trailheads, bike parks and picnic areas, the Saddle Buddy offers a resting place for cyclists noble steeds. The convenient bar allows cyclists to keep their bikes
More informationCATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS
CATALOG DESIGNED AND DEVELOPED IN THE NETHERLANDS FERM PROFESSIONAL TOUGH TOOLS FOR THE PROFESSIONAL FERM, founded in 1965, is one of the leading European power tool brands. Our headquarters is based in
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More information- 4 - Fig. 3b. Fig. 1b. Fig. 2. Fig. 2b MT 300
MP 00 Manual 1 7 6 9 8 5 1 1 10 11 1 Fig. 1a Fig. 1b MT 00 Breite Buche Erle Pappel Balsa 0 0,5 0,8 0,8 0,8 max. Zustellung mm 0 0, 0,6 0,8 0,8 60 0, 0, 0, 0,8 80 0,1 0,1 0, 0,6 n Messerwelle = 6.000/min
More informationEspecially suitable for work in restricted working spaces.
Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.
More informationCORE DRILL, RIG AND BIT SYSTEM
CORE DRILL, RIG AND BIT SYSTEM BCR 130/5BG PROFESSIONAL HANDHELD CORE DRILL Power: 2.6HP/2000W Motor: 115V/60Hz/3-Speed Gearing Bit Range: 3/8" 5-1/8" Wet handheld drilling in concrete: 3/8" 1-1/2" Dry
More information6.1. PUSH-PULL-PROPS and accessories
6 6.1. PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY 6 GENERAL INFORMATION PUSH-PULL-PROPS AND ACCESSORIES INDEX General information....................... 3 Push-pull-props Type R.....................
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationGENERAL CATALOGUE drilling / cutting / sawing
www.cardi.biz GENERAL CATALOGUE 2016-2017 drilling / cutting / sawing TABLE OF CONTENTS HAND HELD CORE DRILLS pag. 3 HAND HELD CORE DRILLS WITH DRILL STAND pag. 6 CORE DRILL KITS FOR SPECIFIC APPLICATIONS
More informationMEFA mounting accessories
MEFA mounting accessories Mounting accessories Base plates Page 5/2 Double holder Page 5/4 Height-adjustable suspensions Page 5/5 Pendular bolt joints Page 5/6 Trapeze hanger Page 5/7 Threaded hooks, distance
More informationTOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
More informationASSEMBLY AND CARE INSTRUCTIONS JUST FOR KIDS 355
ASSEMBLY AND CARE INSTRUCTIONS VERSION: 8920100 (Revised 06/16) JUST FOR KIDS 355 SALES AND SERVICE spiethamerica.com Canada and International 135 Forestview Road, PO Box 40 Orillia, Ontario, Canada L3V
More informationAdjustable Feet Castors Accessories for Floor Elements
Adjustable Feet Castors Accessories for Floor Elements Products in this section Levelling Knuckle Feet Threaded spindles for infinite height adjustment Metal or plastic foot plate Knuckle Feet X Compatible
More informationPUSH-PULL-PROPS. and accessories ROBUSTA-GAUKEL GMBH MOUNTING TECHNOLOGY &CO.KG
PUSH-PULL-PROPS and accessories MOUNTING TECHNOLOGY ROBUSTA-GAUKEL GMBH &CO.KG MOUNTING TECHNOLOGY PUSH-PULL-PROPS AND ACCESSORIES INDEX General information...................... 3 Push-pull-prop Type
More informationSink BULL INSTRUCTION MANUAL. with Rapid Z -CUT & Rapid Z -DRUM
Sink BULL with Rapid Z -CUT & Rapid Z -DRUM INSTRUCTION MANUAL Please read this instruction manual thoroughly to ensure safety and the correct use of this tool. Keep this manual in a place where operators
More informationSales & Service. JFK - Just For Kids. sasportonline.com. 135 Forestview Road 7879 Will Rogers Blvd.
Sales & Service sasportonline.com SA Sport (Canada) SA Sport (U.S.A.) 135 Forestview Road 7879 Will Rogers Blvd. P.O. Box 40 Fort Worth, Texas Orillia, Ontario USA 76140 Canada L3V 6H9 Telephone: (705)
More informationThank you for your order
Installation Guide Thank you for your order Ph: 09-9133110 Fax: 09-9133113 5 Smales Road. East Tamaki, Manukau PO Box 58031 Greenmount, Manukau 2013 AUCKLAND // WELLINGTON // CHRISTCHURCH www.bathroomdirect.co.nz
More informationSE 320 SE 520. CNC center lathes
CNC center lathes These machines combine advantages of universal lathes and CNC lathes. The machine works as an universal lathe, in manual mode, being controlled by the hand wheels. If required, the operation
More informationPRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
More informationVINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS
P a g e 1 VINYL CLASSIC FREESTANDING PERGOLA ASSEMBLY INSTRUCTIONS Shown: 8' x 12' Vinyl Classic Pergola with 12" Top and Main Runner Spacing The design of this pergola is based on all posts being installed
More information» Modular clamping elements for optical or optical/tactical measurement» For high-precision edge measurements in reflected and transmitted light
» Modular clamping elements for optical or optical/tactical measurement» For highprecision edge measurements in reflected and transmitted light» Toothed rails as workpiece stops or for fastening clamping
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel Tradition and modernity A strong company, a strong group We have been at home
More information1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE 1400A-1700A-1800A
1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE 1400A-1700A-1800A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5232 QCI5232 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationIndustrial Contractors Supplies, Inc.
Industrial Contractors Supplies, Inc. - Dust Director Division - 15061 Route 30, N. Huntingdon, PA 15642 Phone: 412. 824. 6933 Fax: 412. 824. 4704 www.dustdirector.com 5" & 7" SURFACE DUST GUARDS MANUAL
More informationBattery pack, 4,8 V
FOR DEVICES NO LONGER INCLUDED IN THE CATALOGUE (DELIVERY ONLY AS LONG AS STOCKS LAST) HAND-HELD ELECTRICAL TOOLS IMPACT DRILLS For Sb E 1000/2 S- R+L Signal Diamond core bit, M 22, hard, 66 diameter 6.24500
More informationSelection BASIC LINE BASIC LINE PLUS VARIO LINE SERIES TUBE LINE STEEL LINE
PLUS 30 for cable carriers Support trays page 304 PLUS Guide channels page 305 RCC Rail Cable Carrier page 309 ECC Emergency Cable Carrier page 30 Strain relief devices page 3 Assembly profile bars page
More information2016 /
206 / 207 www.rothenberger.com O NE of 6.000 Premium tools for professionals! R 600 Almost real Classics : Our R-system pipe cleaning machines R 550, R 600, R 650 and R 750 can remove even the most persistent
More informationFEET, WHEELS, FLOOR FASTENINGS, SUPPORTS
SYSTEM COMPONENTS FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS s t r oppu S, s gn i n e t s af r oo l F, s l eehw, t e ef FEET, WHEELS, FLOOR FASTENINGS, SUPPORTS 136 MINITEC PROFILE SYSTEM BASE AND TRANSPORT
More informationHBS-AP ASSEMBLING INSTRUCTIONS
ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK - ALUMINIUM PIPEWORK 97 HBS-AP ASSEMBLING INSTRUCTIONS 1. INTRODUCTION 1.1. This manual is very easy to consult and we recommend reading it before starting work,
More informationExternal Motor Driven SCREEN-PRO. All Season Roll-Up Doors WALL MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST
External Motor Driven SCREEN-PRO All Season Roll-Up Doors WALL MOUNTING METHOD INSTALLATION INSTRUCTIONS READ THIS FIRST Carefully examine the crate(s) for damage before opening. If the carton is damaged,
More informationPERCUSSION DRILL BITS
Universal drill bit GOLCRAFT 44 SS-plus MS5 universal drill bit GOLCRAFT 46 Tile/brick drill bit KERAMIK 47 Tile drill bit / KERAMIK diamond - dry drill 49 Glass drill bit 51 Glass drill bit KEILBIT 52
More informationNRS Installation Manual
NRS Installation Manual Chair Mount Type Standard / EU Spec. KAZE (AY-KFPLU AY-NRS1 is shown.) OTO (AY-OLL AY-NRS1 is shown.) Separate Type (AY-NRS2B-W is shown.) Installer: Read through this installation
More informationfor all big jobs. Always the right tool More information. UB9 5HJ Middlesex Uxbridge Denham Broadwater Park Robert Bosch Ltd
Robert Bosch Ltd Broadwater Park Denham Uxbridge Middlesex UB9 5HJ 1619GB5S17 UK Printed in Federal Republic of Germany Subject to technical alterations. No liability is accepted for printing errors. More
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationLimited Edition. Created :33 Revised :36 Page 1
Created 11.02.2005 07:33 Revised 19.07.2005 09:36 Page 1 INDEX Article Group Page Heating Generator 3 Hedge Trimmer Kit 3 Gardenshredder Kit 4 Fountain Pump 4 Domestic Pumping Station 5 Garden Pump 5 Woodmaster
More informationVario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.
124 jaws Page 128 accessories Page 129 Quick Point Super Vario vice Page 132 Clean Tec Quick Tower Automation Makro Grip Grip Fix A system for all common vices How does it work? The pins are blown out
More informationThe following instructions will guide you through the installation of your new vinyl railing stair kit.
Installation Guide Vinyl Standard Stair Railing Tools Required Protective eye glasses Tape measure Variable speed drill/screwdriver Rotary hammer or hammer drill and masonry percussion bit recommended
More informationINSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233
INSTALLATION INSTRUCTIONS FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5233 QCI5233 Rev 0 Page 1 Certified 06/20/2016 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More information5-AXIS MACHINING SCS QUINTUS WWW. WORKHOLDINGSOLUTIONSGROUP. COM
WORKHOLDING SOLUTIONS FOR -AXIS MACHINING SCS MC QUINTUS ONE system / MANY solutions WWW. WORKHOLDINGSOLUTIONSGROUP. COM MCCLAMPING S YSTEM for -axis machining MC + Quintus... MC Clamping System Free access
More informationUndercut anchor KH AA
HS 15 Undercut anchor KH AA Undercut anchor KH AA = 7 = 3 min DIBt 6,0 4,0 1,5 M6x8.5 14 020 820 6,0 4,0 3,0 M6x10 14 020 742 DRILLING Anchor sleeve inc. hexagon bolt with locking ratchet in stainless
More informationPLASTIC PIPE WELDING PLASTIC PIPE WELDING
PLASTIC PIPE WELDING PLASTIC PIPE WELDING Plastic Pipe Welding Electric sleeve welding unit 222 Sleeve welding units 223 Butt welding machines 224 Butt welding units 228 REMS EMSG 160 Electric sleeve welding
More informationGiraffe wall and ceiling sander with interchangeable head system
Bahnhofstraße 5 77 Steinheim Phone +49 744 828-0 Fax +49 744 899 Giraffe wall and ceiling sander with interchangeable head system GE 7 + MH-O Order number 460.00 Power input 70 watt Power output 40 watt
More informationHolesaw Morse 19mm Holesaw Morse 24mm Holesaw Morse 30mm Holesaw Morse 38mm
Holesaw Morse 19mm 7002-206 Holesaw Morse 24mm 7002-065 Holesaw Morse 30mm 7002-066 Holesaw Morse 38mm 7002-067 Holesaw Morse 38mm - Drilled for Holesaw Taps 7002-067DR Holesaw Morse 44mm 7002-068 Holesaw
More information1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE
1/4 FRAMELESS CONTINUOUS HINGE SHOWER ENCLOSURE QCI5028 Rev 1 Page 1 Certified 09/19/2018 INSTALLATION NOTES: Unpack your unit carefully and inspect for freight damage. Lay out and identify all parts using
More informationPull Handles Fixing Types. One-sided installation. Installation per pair. Wood, plastic profiles, 2-3 chamber aluminium profiles
Pull Handles Fixing Types One-sided installation Wood, plastic profiles, 2-3 chamber aluminium profiles Installation per pair Wood, plastic profiles, 2-3 chamber aluminium profiles 204 HEWI Hardware Technology
More informationPARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS. DR-584b
PARAGON BATH SHOWER DOOR/ BATH TUB SCREEN INSTALLATION INSTRUCTIONS DR-584b Please read these instructions carefully before installing. If you have any questions regarding installation, please call our
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationRoller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides
Roller Guides C-Rail Systems Linear Guide Systems Ball-Bearing Guide Bushes Ball-bush block guides Shafts Accessories for Linear Slides Application example linear systems, drives and accessories 1 2 3
More informationPRESENTATION. All machining Repetitive machining. The choice of a wide range of varied clamps that correspond to the individual s needs
KOPAL PRESENTATION Vertical pressure clamping System KOPAL With neither riser block nor adjusting required, the system allows a continuous adaptation of the clamping height whilst retaining the clamping
More informationCUTTING, SAWING AND GRINDING
CUTTING, SAWING AND GRINDING 108 Cutting and Grinding Corded angle grinder AG 115-S Page 110 Corded angle grinder AG 115-D Page 110 Angle grinder DCG 125-S Page 110 Corded angle grinder AG 180-D Page 111
More informationMUTO COMFORT DORMOTION XL 150/80 L 80
MUTO COMFORT DORMOTION XL 150/80 L 80 Installation instructions - Wall mount with DORMOTION ( ) TABLE OF CONTENTS Closer overall Overview Intended use Wall requirements and fittings Safety instructions
More informationKesel Clamping Systems
Kesel Clamping Systems CLAMPING SYSTEMS Kesel ARNO Kesel CNC Kesel NCA Kesel Bull Kesel ZS Kesel Syncroline Kesel USS Kesel A strong company, a strong group Kesel Managing Director Martin K. Klug The people
More informationComposition of kit SC3140 SC3110 SC3100 SC3140 SC3120. KF-SC31-R0_EN PAGE 2 of 15. max mm. max. 100 kg. 10 mm
Composition of kit SC3140 SC3100 SC3140 SC3120 max. 100 kg 10 mm max. 2700 mm KF-SC31-R0_EN PAGE 2 of 15 important information KF-SC31-R0_EN PAGE 3 of 15 DIAGRAM OF WALL OPENING AND CROSS-SECTION Lv LG
More informationSLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1. Version 8 (Up to date: May 2012)
SLIDING DOOR SYSTEM: ASSEMBLY INSTRUCTION SLIDING DOOR SERIES AIR-B S42 SYNCHRON DRIVE 1 Version 8 (Up to date: May 2012) 01.03.1.b 01.03.1.c CONTENT General information and tools_ page 03 Accessories_
More informationCATALOGUE FOR PVC DOOR AND WINDOW MACHINES
Welding the four 90 corners of the PVC profile frame JTG HST 5050 Four corner welding machine Cooling station Turning station with servo motor 2 axis CNC corner cleaning machine Automatic and manual usage
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationALFRA. Deburring Technology. Bevel Milling and Deburring Devices for the universal use B/79
ALFRA B Deburring Technology Bevel Milling and Deburring Devices for the universal use B/79 ALFRA Bevel Milling and Deburring Devices Overview Made in Germany by ALFRA Page B/84 Page B/86 Type KFV KFH
More informationUNIT No FRAMELESS PIVOT SHOWER DOOR
INSTALLATION INSTRUCTIONS UNIT No. 3600 FRAMELESS PIVOT SHOWER DOOR NEED INSTALLATION HELP? Call 1-800-45-BASCO (452-2726) Monday - Friday 8:00 A.M. - 4:30 P.M. Eastern Time QCI0020 Rev. 3 Page 1 of 8
More informationC11.16 CHRONO ACCESSORIES C11 SIDE HUNG WINDOWS
C11 SIDE HUNG WINDOWS CHRONO ACCESSORIES 01.12.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Window stays....03
More informationTHE HARDEST GANG IN TOWN.
HAMMERS THE HARDEST GANG IN TOWN. When we do something, then we do it right. That is why our haers are how tools for craftspeople should be: robust, powerful and durable. Our complete range of haers is
More informationPiazzola Pergola Awning Manufacturing and installation guide
Piazzola Pergola Awning Manufacturing and installation guide Date Changes Page General information Maximum and minimum width Width Projection 150 to 349 cm 350 to 500 cm From 200 to 250 cm X From 251 to
More informationBy C.W. Woodson From the pages of Model Craftsman magazine June, 1937
By C.W. Woodson From the pages of Model Craftsman magazine June, 1937 As shown in Fig. 1, the tool post grinder for which plans are given here can be used to finish up delicate work to more accurate dimensions
More informationENIGMA AIR ENCLOSURE
ENIGMA AIR ENCLOSURE SHOWER ENCLOSURE INSTALLATION INSTRUCTION IMPORTANT DreamLine reserves the right to alter, modify or redesign products at any time without prior notice. For the latest up-to-date technical
More informationMT/JIG USA RTD AB
4609 MT/JIG USA RTD000007AB Items Enclosed x Bag B x x x x6 Bag A x x x x x4 x x4 x x x x x4 x x For Technical Support email: technical@trend-usa.com -- Description of parts Male adjustable lever Top plate
More informationCNC Router Parts PRO Machine Kit Cable Track Installation Instructions
1 1 X CABLE TRACK TRAYS & BRACKETS The cable track on the side of the system is supported by a metal tray (or multiple trays for longer systems such as a PRO4896). These trays hang from brackets on the
More informationDIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE
DIY GLASS BALUSTRADE AND POOL FENCING THE CHOICE IS SIMPLE SAFE STYLISH AND AFFORDABLE FOR DIY GLASS FENCE SOLUTIONS THE CHOICE IS SIMPLE Bring your outdoor areas to life with clear views and clean lines.
More informationWheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
More informationTable of Content. Machine Features and Functions. Specifications. Configuration and Working Principle 5. Machine Operation. Machine Adjustments
Table of Content Safety Instructions Machine Features and Functions Specifications 2 3 4 Configuration and Working Principle 5 Machine Operation 7 Machine Adjustments 8 Machine Installation 9 Machine Remove
More informationRAILING R A IL ING 51
RAILING RAILING 5 TREX TRANSCEND RAILING NOTES:» TREX TRANSCEND RAILINGS ARE DESIGNED TO BE INSTALLED OVER THE DECKING FRAME OR ON INSIDE OF RIM JOIST. NOTCHING OF PRESSURE-TREATED POSTS OR POSTS INSTALLED
More informationDrilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
More informationFRAMED SLIDING DOOR FOR TUB OR SHOWER ENCLOSURE 6150A-7150A
FRAMED SLIDING DOOR FOR TUB OR SHOWER ENCLOSURE 6150A-7150A F AB GLASS AND MIRROR www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919 Office Timing: 8:30-18:00 EST info@fabglassandmirror.com
More informationCONDITIONS OF SALE AND WARRANTY
CONDITIONS OF SALE AND WARRANTY 1. Read carefully this operator's handbook before operating our P35 corking machine. 2. M.E.P. guarantees his P35 corking machine in case of breakages caused by faulty components
More informationPanel butt joint with the DOMINO
No. 543 Panel butt joint with the DOMINO A Description The DOMINO wood jointing system can be used easily and quickly to create frame and rack joints frequently required by joiners and carpenters. The
More informationSpecifications for Lathe L- 45/5000(for items from Sr. No.01 to Sr. No.22 in Indent)
Specifications for Lathe L- 45/5000(for items from Sr. 01 to Sr. 22 in Indent) Annexure-1 Sr. Specification of Parameter Parameter Value 1.0 Capacity 1.1 Height of centers (nominal) (mm) 450 1.2 Type of
More informationTanga DX200. The light-weight power pack for the clean removal of windows NEW. 1700W, 70mm cutting detph, reduced weight
Tanga DX200 The light-weight power pack for the clean removal of windows NEW 1700W, 70mm cutting detph, reduced weight No damage to the reveal with the Tanga DX200: - Clean separation of the old window
More informationSLIDING DOORS DIRECT ROLLER
SLIDING DOORS Single door fixed to wall NFK s Direct Sliding Door system, for installation to a solid wall. Height adjustable track supports can be quickly mounted to a wall allowing the glass to pass
More information