SAWS, PIPE CUTTERS. Design. Blade

Size: px

Start display at page:

Download "SAWS, PIPE CUTTERS. Design. Blade"

Irma Cain
6 years ago
Views:

1 SAWS, PIPE CUTTERS Design With the handy pistol shape, already laid pipes can be quickly and easily shortened. Pumping movements release the ratchet mechanism and the blade is thus pushed through the cutting material with the slightest manual effort. Blade The robust replaceable cutting edge can be used with the following materials: hard and soft plastics, rubber hoses, Isoflex pipes, hard and soft PVC pipes, etc. The blade symmetry provides precise right angle cuts without burrs or deformation. Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Pocket saws PUK Vario Innovative small saw bow of x mm flat steel, high-gloss zinc plating, with

mm high sawing space. In two different lengths, each with universal saw blade.

adjustable polished wooden haft 000 with firm, lacquered wooden haft 00 NEW Pocket saw PROFI with

According to DIN Form C, mm length, mm width, 0.

nonferrous metals, fibre glass, plastic conduit and pipes, mineral, rigips and cement asbestos boards

0 mm ( teeth per inch) 00 as above but for Vario 0 0 00 Metal cutting blade for all metals,

mm ( teeth per inch) 0 as above but for Vario 0 0 0 Saw blade set mm thickness.

0 mm ( teeth per inch)), metal cutting saw blade (tooth pitch 0.

thin sheets (tooth pitch 0. mm (0 teeth per inch)), wood cutting saw blade (tooth pitch.

cases (bottom shell), integrated key and blade magazine, powder-coated, PUK bi-metal saw blade 00 mm,

2 Pocket saws PUK Vario Innovative small saw bow of x mm flat steel, high-gloss zinc plating, with ergonomic, glass fibre reinforced plastic handle, blade tension via embedded knurled screw. mm high sawing space. In two different lengths, each with universal saw blade. Vario Weight g 0 0 Vario 0 Weight g 0 Pocket saws PUK Span width mm, with metal cutting saw blade with adjustable polished wooden haft 000 with firm, lacquered wooden haft 00 NEW Pocket saw PROFI with universal blade Span width mm V saw bow fully insulated Span width mm 000 Bulk saw blades According to DIN Form C, mm length, mm width, 0. mm thickness Wood cutting saw blade for hard and soft woods, chipboard and hardboard, soft plastic, etc. Tooth pitch. mm ( teeth per inch) 00 as above but for Vario Universal saw blade for steel, aluminium, nonferrous metals, fibre glass, plastic conduit and pipes, mineral, rigips and cement asbestos boards Tooth pitch.0 mm ( teeth per inch) 00 as above but for Vario Metal cutting blade for all metals, non-ferrous metals (copper), stainless steel, special alloys, Plexiglas and plastics Tooth pitch 0. mm ( teeth per inch) 0 as above but for Vario Saw blade set According to DIN Form C, mm length, mm width, 0. mm thickness. Contains each of the following: universal saw blade (tooth pitch.0 mm ( teeth per inch)), metal cutting saw blade (tooth pitch 0. mm ( teeth per inch)), fine metal cutting saw blade for especially fine, burr-free cuts even in very thin sheets (tooth pitch 0. mm (0 teeth per inch)), wood cutting saw blade (tooth pitch. mm ( teeth per inch)) 00 Metal saw bow Innovative metal saw bow with -component plastic handle in ultra-lightweight design. Ergonomic saw line, fibre glass reinforced, total length 00 mm, suitable for a wide range of tool cases (bottom shell), integrated key and blade magazine, powder-coated, PUK bi-metal saw blade 00 mm, teeth/inch 00 Metal saw bow Especially light and simultaneously very stable metal cutting saw for 00 mm saw blades. Made of die cast aluminium in an ergonomic design, with soft rubber inserts on the handle and front grip. High cutting precision of the blade in straight and 0 degree position due to captive locking pins. Blade can be tensioned up to 00 N by turn-lock fastener in the handle. Delivery incl. a bi-metal cutting saw blade. Span width 00 mm Weight 0 g 00 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Metal saw bow Hacksaw with innovative quick release on the two-component handle for single-sided saw blades DIN Form A.

coating, with attachment pin Span width 00 mm 00 00 V saw bow Fully insulated hacksaw with innovative quick release on the

Span width 00 mm Weight g 00 Metal cutting saw blade according to DIN Form A, single-sided Material Dimensions mm Teeth

0 0 SUPER pipe cutter New, reinforced design Working range - mm ø 0 Replacement blade 0 MAXI pipe cutter with

of die cast magnesium, for cutting plastic and composite pipes up to a diameter of mm.

Blade of PTFE-coated INOX steel with long service life (made in Solingen). Extremely light and compact, only 0 g.

with progressive, gear driven blade feed with -component handle. Blade retraction via one-hand quick retraction mechanism.

3 Metal saw bow Hacksaw with innovative quick release on the two-component handle for single-sided saw blades DIN Form A. With improved grip due to nonslip plastic and additional front slide protection, glossy chrome-plated, with captive locking pins. Span width 00 mm 000 Metal saw bow adjustable, made of right-angle steel tubing, material thickness x mm, red powder coating, with attachment pin Span width 00 mm V saw bow Fully insulated hacksaw with innovative quick release on the handle for single-sided saw blades DIN Form A. With improved grip due to nonslip plastic and reduced weight. Span width 00 mm Weight g 00 Metal cutting saw blade according to DIN Form A, single-sided Material Dimensions mm Teeth per inch HSS-CO 00 x x Form B, double sided Material Dimensions mm Teeth per inch WS 00 x x SUPER pipe cutter New, reinforced design Working range - mm ø 0 Replacement blade 0 MAXI pipe cutter with adjustment-lever for modification of cut-opening Working range - mm ø 0 Replacement blade 0 MINI plastic pipe shears made of die cast magnesium, for cutting plastic and composite pipes up to a diameter of mm. Optimum power transmission, with quick change system for changing blades simply and easily. Automatic blade retraction. Blade of PTFE-coated INOX steel with long service life (made in Solingen). Extremely light and compact, only 0 g. mm ø / /" 0 0 Replacement blade 0 PROFI plastic pipe cutter made of die cast magnesium, for cutting plastic and composite pipes up to a diameter of mm. Optimum power transmission thanks to ratchet mechanism with progressive, gear driven blade feed with -component handle. Blade retraction via one-hand quick retraction mechanism. With quick change system for replacing blades quickly and easily. Blade of PTFE-coated INOX steel with long service life (made in Solingen). mm ø / /" 0 0 Replacement blade 0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Universal pipe cutter with interchangeable knives for insulation and hard PVC pipes and for soft plastic and rubber hoses Pipe outer ø max.

plastic shield tubes up to mm ø in the electrical, plumbing and heating fields, simply rotate the tool to safely cut at the outer diameter

inserts pair 0 Ratchet pipe cutter Innovative pipe cutter with a worldwide patent.

Especially suitable for work in restricted working spaces (e.g., pipes installed in corners or on walls). One-hand operation.

Integrated deburrer for clean edges on the cut pipes. Easily interchangeable cutting wheel.

For outer pipe diameters ranging from to mm ( /" to /").

4 Universal pipe cutter with interchangeable knives for insulation and hard PVC pipes and for soft plastic and rubber hoses Pipe outer ø max. mm 0 00 Bulk knives for hard PVC 0 for soft pipes 0 Corrugated pipe cutter for cutting and trimming corrugated plastic tubes (flex tubes) and plastic shield tubes up to mm ø in the electrical, plumbing and heating fields, simply rotate the tool to safely cut at the outer diameter without damaging the interior pipe, with two interchangeable cutting inserts, weight only g Working range to mm ø 0 00 Replacement cutting inserts pair 0 Ratchet pipe cutter Innovative pipe cutter with a worldwide patent. Ratchet mechanism allows you to cut a pipe without having to completely rotate the tool. Especially suitable for work in restricted working spaces (e.g., pipes installed in corners or on walls). One-hand operation. Especially high performance. Thanks to special cutting wheel and double roller guides (speed, durability). Integrated deburrer for clean edges on the cut pipes. Easily interchangeable cutting wheel. One replacement cutting wheel is contained in the scope of delivery. Weight 00 g. For plastic, copper, aluminium and similar pipes. For outer pipe diameters ranging from to mm ( /" to /"). x x 00 Replacement wheel 0 Hole and disc cutter for manual operation, with scale, for rubber, leather, plastic, etc., two knives also provide ring cutouts 00 mm ø 0 Hole punch for trapezoidal sheets for trapezoidal sheets up to. mm thick and for a cutting width up to 0 mm. Depth stop adjustable from mm mm. Tempered punching die fitted with formed ejection springs. with hole diameter mm 00 mm 0 Punching die with ejection springs Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

SCREW PUNCHERS, PLATE PUNCHERS Well planned First class 0% Made in Germany All tools made of

first cut and speedy punching Less force required due to tapered, relieved blades Die with

parts Shaped punches have lateral ejectors for the scrap part Practical For manual and hydraulic

tools are 0% compatible with the systems of other manufacturers Special punchers can be produced

5 SCREW PUNCHERS, PLATE PUNCHERS Well planned First class 0% Made in Germany All tools made of particularly robust special steel for a long working life Special cutting geometry for light first cut and speedy punching Less force required due to tapered, relieved blades Die with crosshairs for improved positioning Innovative Round punchers split scrap pieces into three parts Shaped punches have lateral ejectors for the scrap part Practical For manual and hydraulic use All tools and accessory parts can be ordered individually - no packaged units All punching tools are 0% compatible with the systems of other manufacturers Special punchers can be produced at short notice if dimensions are given Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Screw puncher DIAMANT Innovative splitting punch with three cutting tips: punched waste is split into three parts. Suitable for: steel sheets (ST ), plastic and aluminium.

.0 x.0.*.0..0 x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Nominal size PG Nominal size, metric Nominal size, metric Hole ø mm Hole ø mm Bolt size mm Bolt size mm Pre-drill ø mm Pre-drill ø mm Max.

mm Nominal Hole ø Bolt size Pre-drill ø Max. material size inch mm mm mm thickness mm - / " 0.. x 0.0.0.0 Screw puncher accessories DIAMANT for bolt size.0 mm x 0 mm Tension bolt with ball bearing.

6 Screw puncher DIAMANT Innovative splitting punch with three cutting tips: punched waste is split into three parts. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: with punch, die, tension bolt with ball bearing (encapsulated) Nominal size PG..0 x x x x x.0.* x.0.* x.0.*.0..0 x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Nominal size PG Nominal size, metric Nominal size, metric Hole ø mm Hole ø mm Bolt size mm Bolt size mm Pre-drill ø mm Pre-drill ø mm Max. material thickness mm Max. material thickness mm.. x x x x x x.0.* x.0.* x.0.* x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Nominal Hole ø Bolt size Pre-drill ø Max. material size inch mm mm mm thickness mm - / " 0.. x Screw puncher accessories DIAMANT for bolt size.0 mm x 0 mm Tension bolt with ball bearing.0 x 0 0 Hydraulic bolt, complete.0 /.0 0 Punch (with.0 mm thread). Die (for.0 mm bolt). for bolt size. mm x 0 mm Tension bolt with ball bearing. x Hydraulic bolt.0 /. 00 Punch (with. mm thread) Die (for. mm bolt) Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Screw puncher accessories DIAMANT for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread)..0 Die (for mm bolt). 0.0 for bolt size mm x mm Tension bolt with ball bearing.

7 Screw puncher accessories DIAMANT for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread)..0 Die (for mm bolt). 0.0 for bolt size mm x mm Tension bolt with ball bearing.0 x 00 Hydraulic bolt.0 x 00 Punch (with mm thread) Die (for mm bolt) Screw puncher DIAMANT - VA Innovative splitting punch with three cutting tips: punched waste is split into three parts. Suitable for: stainless steel (VA steel), steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic (we recommend the use of a hydraulic unit.) Design: with splitting punch, die, without tension bolt Nominal size Nominal size Hole-ø Bolt Pre-drill ø max. Material PG metric mm mm thickness mm.. x x x x.0.* x.0.* x.0.*...0 x.0.*. *. Pre-drill: ø. mm. Pre-punch: ø. mm Nominal size Nominal size Hole-ø Bolt Pre-drill ø max. Material PG metric mm mm thickness mm.. x x x x x.0.*..0.0 x.0.*..0.0 x.0.*..0.0 x.0.* x.0.*. 0 *. Pre-drill: ø. mm. Pre-punch: ø. mm Nominal size Hole-ø Screw Pre-drill ø max. Material Inch mm mm thickness mm - / " 0. x.*. *. Pre-drill: ø. mm. Pre-punch: ø. mm Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

8 Screw puncher accessories DIAMANT - VA for bolt size. mm x 0 mm Tension bolt with ball bearing. x Hydraulic bolt, complete.0 /. 0 Punch (with. mm thread) Die (for. mm bolt) for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread) Die (for mm bolt) for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread) Die (for mm bolt) Round screw puncher BASIC Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: includes punch, die and tension bolt with ball bearing (encapsulated) Nominal size Nominal size Hole-ø Bolt Pre-drill ø max. Material PG metric mm mm thickness mm.. x x x x x.0.* x.0.*.0..0 x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

9 Round screw puncher BASIC Nominal size Nominal size Hole-ø Bolt Pre-drill ø max. Material PG metric mm mm thickness mm.. x x x x x x.0.* x.0.* x.0.* x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Nominal size Hole-ø Screw Pre-drill ø max. Material Inch mm mm thickness mm - / " 0.. x x.0.*.0 - / " x.0.*.0 0 "..0 x.0.*.0 - / " x.0.* x.0.*.0 *. Pre-drill: ø.0 mm. Pre-punch: ø. mm Screw puncher accessories BASIC for bolt size. mm x 0 mm Tension bolt with ball bearing. x Hydraulic bolt.0 /. 00 Punch (with. mm thread) Die (for. mm bolt) for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread).0 0. Die (for mm bolt) Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Screw puncher accessories BASIC for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread).

Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: consists of splitting punches and dies.

0.0.0 0.0 pieces 000.0.0.0.0 0.0 0.0.0 pieces 00 Additional equipment: tension bolt with ball bearing (encapsulated), pre-drill and assembly paste Design Nominal size Max.

10 Screw puncher accessories BASIC for bolt size mm x mm Tension bolt with ball bearing.0 x.0 00 Hydraulic bolt.0 x.0 00 Punch (with mm thread) Die (for mm bolt) Screw puncher DIAMANT sets Options with five or seven different sizes. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: consists of splitting punches and dies. Storage: in practical, robust plastic case Design Nominal size Max. material thickness mm metric mm pieces pieces 00 Additional equipment: tension bolt with ball bearing (encapsulated), pre-drill and assembly paste Design Nominal size Max. material thickness mm metric mm pieces pieces 0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Screw puncher DIAMANT sets pieces screw puncher sets including hand-held punch and accessories. Options: with straight hand-held punch or 0 angled hand-held punch.

Operation: hydraulic Design: consists of five splitting punches and dies per set; hydraulic bolts ( items), pre-drill and spacer sleeve set ( pieces).

0 pieces 0 Contains 0 angled hand-held punch, can be rotated 0 Design Nominal size Max. material thickness mm metric mm.0.0.0.0 0.

11 Screw puncher DIAMANT sets pieces screw puncher sets including hand-held punch and accessories. Options: with straight hand-held punch or 0 angled hand-held punch. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: hydraulic Design: consists of five splitting punches and dies per set; hydraulic bolts ( items), pre-drill and spacer sleeve set ( pieces). Storage: in practical, robust plastic case Contains straight hydraulic hand-held punch Design Nominal size Max. material thickness mm metric mm pieces 0 Contains 0 angled hand-held punch, can be rotated 0 Design Nominal size Max. material thickness mm metric mm pieces 0 pieces screw puncher set accessories Hydraulic bolt, complete.0 /. 00 Hydraulic bolt.0 x.0 00 Spacer sleeve set ( pieces) 0 Pre-drill.0 0 Screw puncher DIAMANT - VA sets Screw puncher sets consisting of splitting punches and dies: options for five or seven different sizes. Suitable for: stainless steel (VA steel), steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic (We recommend the use of a hydraulic unit.) Design: consists of splitting punches and dies. Storage: in practical, robust plastic case Design Nominal size Max. material thickness mm metric mm pieces pieces 00 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Screw puncher DIAMANT - VA sets pieces screw puncher sets including hand-held punch and accessories.

pieces 0 Contains 0 angled hand-held punch, can be rotated 0 Design Nominal size Max. material thickness mm metric mm.... 0. pieces 0 pieces screw puncher set accessories Hydraulic bolt, complete.

Hole punching with mm stud: for anti-rotation locking of pushbuttons and switches. Suitable for: steel sheet (ST ), plastic and aluminium.

Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm. mm with mm stud.0.

12 Screw puncher DIAMANT - VA sets pieces screw puncher sets including hand-held punch and accessories. Options: with straight hand-held punch or 0 angled hand-held punch. Suitable for: stainless steel (VA steel), steel sheets (ST ), plastic and aluminium. Operation: hydraulic Design: consists of five splitting punches and dies per set; hydraulic bolts ( items), pre-drill and spacer sleeve set ( pieces). Storage: in practical, robust plastic case Contains straight hydraulic hand-held punch Design Nominal size Max. material thickness mm metric mm pieces 0 Contains 0 angled hand-held punch, can be rotated 0 Design Nominal size Max. material thickness mm metric mm pieces 0 pieces screw puncher set accessories Hydraulic bolt, complete.0 /. 0 Hydraulic bolt.0 x.0 00 Spacer sleeve set ( pieces) 0 Pre-drill. 00 Round and groove screw puncher Patented die: with lateral scrap part ejector. Hole punching with mm stud: for anti-rotation locking of pushbuttons and switches. Suitable for: steel sheet (ST ), plastic and aluminium. Operation: manual and hydraulic Design: with punch, die, tension bolt with ball bearing (encapsulated), counter nut and adapter for hydraulic operation. Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm. mm with mm stud mm, mm, mm Round and groove screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 0 Adapter for hydraulics 0 Punch Die Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

13 Round and groove screw puncher VA With lateral ejector for the scrap part, supplied in a plastic case, also suitable for hydraulic operation, stainless steel sheets (VA) and steel sheets (ST ). Hole punch design complete with stud. For anti-rotation locking of pushbuttons and switches. mm, mm Nominal Pre-drill Max. material size ø ø mm thickness mm. mm with mm stud Round and groove screw puncher VA accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 0 Adapter for hydraulics 0 Punch Die , mm Rectangular screw puncher Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: with punch, die, tension bolt with ball bearing (encapsulated), counter nut and adapter for hydraulic operation. Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm.0 x x x x x Rectangular screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 0 Adapter for hydraulics 0 Punch.0 x.0 Die.0 x.0 Rectangular screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 00 Adapter for hydraulics 0 Punch. x. Punch.0 x 0.0 Punch.0 x.0 Die. x. 0 Die.0 x 0.0 Die.0 x.0 Counter nut 0 Punch.0 x 0.0 Die.0 x 0.0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Rectangular screw puncher Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ), plastic and aluminium.

0*.0 *Only in combination with CIMCO article no. 0 or adapter 0 Rectangular screw puncher accessories Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 Punch.0 x.0 Die.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.

Operation: manual and hydraulic Design: with punch, die, tension bolt with ball bearing (encapsulated), counter nut and adapter for hydraulic operation.

14 Rectangular screw puncher Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: hydraulic Design: with punch, die, hydraulic bolt and counter nut Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm.0 x x x.0 0.0*.0 *Only in combination with CIMCO article no. 0 or adapter 0 Rectangular screw puncher accessories Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 Punch.0 x.0 Die.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 0 Die.0 x.0 Square screw puncher Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: manual and hydraulic Design: with punch, die, tension bolt with ball bearing (encapsulated), counter nut and adapter for hydraulic operation. Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm. x..0.. x x x x x Square screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 0 Adapter for hydraulics 0 Punch. x. Punch. x. Die. x. Die. x. Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 0 Adapter for hydraulics 0 Punch.0 x.0 Punch. x. Punch.0 x.0 0 Die.0 x.0 Die. x. 0 Die.0 x.0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Square screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 00 Adapter for hydraulics 0 Punch. x. Die. x. Square screw puncher Patented die: with lateral scrap part ejector.

15 Square screw puncher accessories Tension bolt with ball bearing 0 Counter nut 0 Screw-down nut 00 Adapter for hydraulics 0 Punch. x. Die. x. Square screw puncher Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ), plastic and aluminium. Operation: hydraulic. Design: with punch, die, hydraulic bolt and counter nut. Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm. x x x x x.0 0.0*.0.0 x.0 0.0*.0.0 x.0 0.0*.0 0 *Only in combination with CIMCO article no. 0 or adapter 0 Square screw puncher accessories Hydraulic bolt 0 Counter nut 00 Punch. x. Punch.0 x.0 Die. x. Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch 0. x Die 0. x 0. Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 0 Die.0 x.0 Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 0 Die.0 x.0 Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 0 Punch.0 x.0 0 Die.0 x.0 Die.0 x.0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Square screw puncher - VA Patented die: with lateral scrap part ejector. Suitable for: stainless steel (VA steel) and steel sheets (ST ). Operation: hydraulic.

0*.0 *Only in combination with CIMCO article no. 0 or adapter 0 Square screw puncher VA accessories Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 0 Punch.

Suitable for: steel sheets (ST ) and stainless steel (VA steel). Operation: manual and hydraulic.

practical, robust plastic case Number Nominal Pre-drill Max. material of pins size mm ø mm thickness mm ST /

16 Square screw puncher - VA Patented die: with lateral scrap part ejector. Suitable for: stainless steel (VA steel) and steel sheets (ST ). Operation: hydraulic. Design: with punch, die, hydraulic bolt and counter nut. Storage: in a practical, robust plastic case Nominal Pre-drill Max. material size ø ø mm thickness mm.0 x x x.0 0.0*.0 *Only in combination with CIMCO article no. 0 or adapter 0 Square screw puncher VA accessories Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 0 Die.0 x.0 Hydraulic bolt 0 Counter nut 0 Punch.0 x.0 0 Die.0 x.0 Screw puncher Sub-Min-D Patented die: with lateral scrap part ejector. Suitable for: steel sheets (ST ) and stainless steel (VA steel). Operation: manual and hydraulic. Design: for multiple plug-in connectors, with punch, die, tension bolt, counter nut, screw-down nut with ball bearing (encapsulated) and adapter for hydraulic operation Storage: in a practical, robust plastic case Number Nominal Pre-drill Max. material of pins size mm ø mm thickness mm ST / VA.0 x /.0. x /.0.0 x..0. /.. x..0. / x..0. /.00 Screw punch Sub-Min-D accessories Tension bolt 0 Counter nut 0 Screw-down nut 0 Adapter/hydraulics 0 Punch.0 x. Die.0 x. Tension bolt 0 Counter nut 00 Screw-down nut 0 Adapter/hydraulics 0 Punch. x. Die. x. Tension bolt 0 Counter nut 0 Screw-down nut 0 Adapter/hydraulics 0 Punch.0 x. Die.0 x. Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

17 Screw punch Sub-Min-D accessories Tension bolt 0 Counter nut 0 Screw-down nut 0 Adapter/hydraulics 0 Punch. x. 0 Die. x. 0 Tension bolt 0 Counter nut 0 Screw-down nut 0 Adapter/hydraulics 0 Punch. x. Die. x. Special screw puncher for heavy-duty plug-in connectors Patented die: with lateral scrap part ejector. Drilling position is marked out by the die using prick punches: prick punches can be exchanged using. mm hex keys or wound back. There is therefore no need to mark out the centre marking. Suitable for: steel sheet (ST ), plastic and aluminium. Operation: hydraulic. Design: with punch, die, hydraulic bolt and counter nut. Storage: in a practical, robust plastic case Number Nominal size Pre-drill ø Max. material thickness of pins mm mm mm.0 x x x x Special screw puncher accessories Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Special screw puncher VA for heavy-duty plug-in connectors Patented die: with lateral scrap part ejector. Drilling position is marked out by the die using prick punches: prick punches can be exchanged using. mm hex keys or wound back. There is therefore no need to mark out the centre marking. Suitable for: stainless steel (VA) and steel sheet (ST ). Operation: hydraulic. Design: with punch, die, hydraulic bolt and counter nut. Storage: in a practical, robust plastic case Number Nominal size Pre-drill ø Max. material of pins mm mm thickness mm ST / VA.0 x x x x Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Special screw puncher VA accessories Design Hydraulic bolt 0 Counter nut 00 Punch.0 x.

0 0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.

0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.

rechargeable V battery, for round, rectangular and square punching in control cabinets and plant

With pressure relief valve, high-performance drive motor, high tensile strength aluminium head, weight

kg, ergonomically designed two-component handle, rechargeable battery packages can be inserted from

back for space-saving operation Punching force: 0 kn with pressure relief valve Battery: charging

with NiCD, NiMH and Li-Ion batteries, Automatic temperature monitoring, charge condition on LED

rechargeable batteries, - V charger, two hydraulic bolts, spacer sleeve set ( pieces), pre-drill.

0 Hydraulic hand-held punches Practical hand-held punch for round, rectangular and square punching in

18 Special screw puncher VA accessories Design Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 0 Die.0 x.0 0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic bolt 0 Counter nut 00 Punch.0 x.0 Die.0 x.0 Hydraulic battery-operated punch Practical hand-held hydraulic tool with high performance rechargeable V battery, for round, rectangular and square punching in control cabinets and plant construction. With pressure relief valve, high-performance drive motor, high tensile strength aluminium head, weight including battery only. kg, ergonomically designed two-component handle, rechargeable battery packages can be inserted from either of two sides: Battery insertion at the front to ensure stable position Battery insertion at the back for space-saving operation Punching force: 0 kn with pressure relief valve Battery: charging time: minutes after full discharge Charger: will charge all rechargeable - V batteries, compatible with NiCD, NiMH and Li-Ion batteries, Automatic temperature monitoring, charge condition on LED display Supplied in a robust plastic case: battery operated hand-held hydraulic unit, two V rechargeable batteries, - V charger, two hydraulic bolts, spacer sleeve set ( pieces), pre-drill.0 mm, operating instructions Hydraulic battery-operated punch with accessories 0 Rechargeable battery 0 Hydraulic hand-held punches Practical hand-held punch for round, rectangular and square punching in control cabinets and plant construction. Pressure relief valve provides safety function: pressure switched off automatically at 0 bar. Made of high tensile strength aluminium (saving approx. 0% in weight), ergonomic handle - springs back by itself, one-handed operation means easier positioning of the die in the crosshairs. Punching force: kn, operating pressure max: 0 bar. Hydraulic hand-held punch - straight design (. kg) 0 Hydraulic hand-held punch - angled 0, can be rotated 0 (. kg) 0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Hydraulic punch with hand pump Ideal in restricted spaces, for round, rectangular and square punching in control cabinets and plant construction.

0 kg Supplied in a robust plastic case: hydraulic punch with hand pump, hydraulic cylinder, hydraulic 00 mm hose, two hydraulic bolts, spacer sleeve set (

0 mm Hydraulic punch with hand pump 0 Hydraulic punch with foot pump Ideal in restricted spaces, for round, rectangular and square punching in control

Keep both hands free for exact positioning and punching: splayed support stand ensures tip-proof operation Punching force: kn with pressure relief valve

cm per piston stroke Supplied in a robust plastic case: foot pump, hydraulic cylinder with quick-fitting coupling, hydraulic hose.

0 mm Hydraulic punch with foot pump 0 Hydraulic cylinder For all electric, foot and hand-operated pumps with quick-fitting coupling and a maximum output

Compact construction, for punching round, rectangular and square holes as well as special shapes in stainless steel and steel sheet ST (control cabinets and

Hydraulic cylinder with quick-fitting coupling (up to kn), high tensile strength aluminium body, suitable for tension bolts with UNF thread, ø.

19 Hydraulic punch with hand pump Ideal in restricted spaces, for round, rectangular and square punching in control cabinets and plant construction. Punching force: kn with pressure relief valve Operating pressure max: 0 bar Weight:.0 kg Supplied in a robust plastic case: hydraulic punch with hand pump, hydraulic cylinder, hydraulic 00 mm hose, two hydraulic bolts, spacer sleeve set ( pieces), HSS pre-drill.0 mm Hydraulic punch with hand pump 0 Hydraulic punch with foot pump Ideal in restricted spaces, for round, rectangular and square punching in control cabinets and plant construction. Keep both hands free for exact positioning and punching: splayed support stand ensures tip-proof operation Punching force: kn with pressure relief valve Operating pressure max: 00 bar Tank volume: 0 cm Usable oil volume: 0 cm Flow rate:. cm per piston stroke Supplied in a robust plastic case: foot pump, hydraulic cylinder with quick-fitting coupling, hydraulic hose. m, two hydraulic bolts, spacer sleeve set ( pieces), pre-drill.0 mm Hydraulic punch with foot pump 0 Hydraulic cylinder For all electric, foot and hand-operated pumps with quick-fitting coupling and a maximum output pressure of 00 bar. Compact construction, for punching round, rectangular and square holes as well as special shapes in stainless steel and steel sheet ST (control cabinets and plant construction). Hydraulic cylinder with quick-fitting coupling (up to kn), high tensile strength aluminium body, suitable for tension bolts with UNF thread, ø.0 mm, drip-free coupling and uncoupling, easy operation, with dust protector cap, supplied in a plastic case. 0 Keyway pliers Punch keyways quickly and easily in.0 mm steel sheets (ST ), save time-consuming filing of grooves for anti-rotational locking, options for keyways in. mm and. mm size, exchangeable keyway punch, long operating life as punch and die are made of hardened tool steel, easy punching thanks to strong lever action, weight. kg, mm, mm Keyway pliers 000 Replacement punches in. mm and. mm 00 Nibbler Pre-punched round holes can easily and economically be converted to square or rectangular holes. Particularly recommended for producing unusual dimensions (special shapes). Round to rectangular Round to square c Material thickness: max..0 mm ST Dimensions: a b c Pre-punch ASN.0... mm ø ASN mm ø a b Nibbler ASN 00 Nibbler ASN 00 Replacement punch ASN 00 Replacement punch ASN 0 0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Quick release nut For shaped punch with thread shape UNF mm, used as replacement for normal counter nut saving approx. % time in comparison to screw version.

The quick release nut is pushed onto the thread of the tension bolt and then when it touches the stamp, is latched onto Cover. Pushing the cover back releases this latching on again.

For use in oversized drill holes, for example in control cabinets to centre tension bolts (screw puncher).

20 Quick release nut For shaped punch with thread shape UNF mm, used as replacement for normal counter nut saving approx. % time in comparison to screw version. For quickly locking and unlocking on the thread, however screwing it on or off normally is ensured despite this even it if jams. The quick release nut is pushed onto the thread of the tension bolt and then when it touches the stamp, is latched onto Cover. Pushing the cover back releases this latching on again. Quick release nut without tension bolt 0 Screw puncher centring ring Made of plastic. Ideal aid for tension bolts or hydraulic bolts in screw puncher systems. For use in oversized drill holes, for example in control cabinets to centre tension bolts (screw puncher). The centring ring can be used with all known screw puncher designs that split the scrap part - including products from other manufacturers! Suitable for puncher systems that split into or pieces. The ring size is suitable for mm connecting bolts (UNF/-) both in manual and also in hydraulic operation. The ring in size can be used for a hole diameter of up to mm in the sheet to be processed. The smallest hole diameter in which the ring will still link tool and workpiece is. mm. 00 for manual operation Bolts for steel sheets ST Tension bolt with ball bearing (encapsulated).0 x Tension bolt with ball bearing (encapsulated). x Bolts for stainless steel and steel sheets ST Tension bolt with ball bearing (encapsulated).0 x.0 00 Tension bolt with ball bearing (encapsulated).0 x.0 00 Tension bolt with ball bearing. x for hydraulic operation Bolts for steel sheets ST Hydraulic bolt, complete.0 /. 00 Hydraulic bolt 00. x.0 0 Adapter for hydraulic bolt 00.0 x.0 (inside:.) 0 Hydraulic bolt.0 x.0 00 Bolts for stainless steel Hydraulic bolt, complete.0 /. 0 Hydraulic bolt 0. x.0 0 Adapter for hydraulic bolt 0.0 x.0 (inside:.) 0 Hydraulic bolt.0 x.0 00 Spacer sleeve set ( pieces) 0 Hydraulic oil litre 0 Spacer sleeve set When using tension bolts size 0.0 mm and above, A set contains: tension bolt A0, long, spacer, two countersunk screws hex socket M x 0, two countersunk screws hex socket M x 0 General accessories Pre-drill.0 0 Pre-drill.0 0 Pre-drill. 00 Step drill, holder shaft ø mm M,M, M, M, M, M0 0 Assembly paste g 0 Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

, mm mm mm mm, mm mm Special step drill for screw punching HSS step drill for burr-free drilling of through-holes for screw puncher tension bolts M ( / ") M ( / ") M M / " M in material up to mm

21 , mm mm mm mm, mm mm Special step drill for screw punching HSS step drill for burr-free drilling of through-holes for screw puncher tension bolts M ( / ") M ( / ") M M / " M in material up to mm thick. Suitable for use in hand and box column drills, total of drill steps, holder shaft (ø mm) with driver carriers prevents slipping in the chuck. Cable duct cutter For cutting burr-free lengths without waste, for plastic conduits and covers, low force required for cutting, foldable, sprung blade protection, fastening lugs for workbench mounting, width of cutting blades up to mm, laser engraved length stop up to 00 mm 0 DIN profile cutter and punching tool For cutting burr-free lengths without waste, for copper mounting rails, reduced force needed with reinforced eccentric, laser-engraved length stop up to 00 mm, hand operation for length cutting and punching in lengthways and crossways mode Profile equipment: TS x - TS x. - TS x. - E-Cu x.0 - C x 0 Profile equipment: TS x - TS x. - TS x. - E-Cu x.0 - G x 00 TS x mm TS x, mm TS x, E-Cu x,0 mm C-Profil x mm mm G-Profil x mm, mm, mm mm mm mm mm mm, mm mm Advice and ordering: Phone: + (0) -0, Fax: + (0) -, order@cimco.de

Especially suitable for work in restricted working spaces.

Innovative ratchet pipe cutter with a worldwide patent and ratchet mechanism allows you to cut a pipe without having o completely rotate the tool. Especially suitable for work in restricted working spaces.