CBI Cooling - Temperature regulation
|
|
|
- Thomasine Powers
- 5 years ago
- Views:
Transcription
1 CBI Cooling - Temperature regulation
2 Non-spill flat-face pollution preventing technology cold water, water glycol, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits: argon, nitrogen, helium, etc. Spill-free to ensure operator safety - no discharge and no work place contamination, - protection for tools and production. Pollution-preventing flat faces to guarantee the integrity of fluids and gases - no pollution enters your circuits. A wider range The CBI is now available in 6 nominal bores: 3, 6, 9, 12,16 and 25 mm. Excellent mechanical strength The robust construction with long plug guiding in the socket, in the connected position provides the CBI with great strength to withstand high mechanical stresses (vibrations, oscillations, etc). 2
3 . ensures seal integrity Push; and its connected Automatic locking CBIs give you even easier handling. A concept that is especially suitable for: - blind connection, - repeated connection. Compact design Especially suitable for difficult access situations. Efficiency Maximum flow in the smallest size. Ease of connection Front sealing by a seal fitted into the back adapter on all cylindrical male plugs. Sealing by sealing-kit KES ring possible on all cylindrical BSP thread sockets (see pages 7, 8 and 11). The opportunity to spend less and contribute to a sustainable development programme With Stäubli, you can rely on: - the performance of your equipment - reliability of long-term investments - no workplace pollution. 3D-files available on request. Possibility of plug installation in to recessed pocket (see p. 6). 3
4 Technical data CBI 03 CBI 09 CBI 12 CBI 16 CBI 25 Max. working pressure (bar) Bore diameter (mm) Shut-off double Sealing Seals: Nitrile (NBR) Fluorocarbon (FPM) Ethylene-Propylene (EPDM) * Perfluoroelastomer (FFKM) in the fluid stream Other seal materials available on request. Construction Largely stainless steel with high mechanical resistance. 100% stainless steel construction available on certain models: see part-numbers tables. Socket dust cap: aluminium and Chloroprene (CR) Plug dust cap: Chloroprene (CR) * Important! Never use Ethylene-Propylene seals with fluids of mineral origin (oil, fat etc ). Working temperatures Without dust cap Type of flow Type of seal Working temperatures ( C) Cold or hot water, hydraulic and mineral oils Nitrile (NBR) - 15 to C Heat transfer oil Fluorocarbon (FPM) - 10 to C Perfluoroelastomer (FFKM) 0 to C Water glycol Ethylene-Propylene (EPDM) * - 20 to C Hot water and steam Ethylene-Propylene (EPDM) * - 20 to C Working temperatures for dust caps in Chloroprene (CR): - 20 to C For other temperatures, consult us. 4
5 Hydraulic flow rate / pressure drop charts Speed of flow less than or equal to 5 m/s: - all seals Speed of flow between 5 and 10 m/s: - Nitrile and Fluorocarbon seals - temperatures 60 C Speed (m/s) Flow (l/min) CBI 03 CBI 09 CBI 12 CBI 16 CBI CBI 03 to CBI 09 Pressure drop (bar) Flow (l/min) CBI 12 to CBI 25 Pressure drop (bar) Test conditions: - Fluid: water - Direction of flow: plug socket Flow (l/min) 5
6 Pneumatic flow rate / pressure drop charts Pressure drop (bar) Test conditions: - Inlet pressure: 6 bar - Direction of flow: plug socket Flow (Nm 3 /h) Plugs installation in to recessed pocket Cylindrical male thread plugs can be fully flush-fitted. When recessed mounting and 09 plugs, to improve grip when disconnecting, it is essential to use the enhanced shoulder locking ring type and 09 sockets. Enhanced shoulder locking ring type and CBI 09 sockets Add the code VP to the or 09 socket part-numbers pages 7 and 8. Ex.:.1101/IA/VP Dimensions : Ø = 24 mm L = 30 mm CBI 09: Ø = 36 mm L = 43 mm Machining drawings for recessed installation available on request 6
7 Part-numbers Sockets Female thread Designation Model Thread (not available for NPT thread) CBI 03 Dimensions (mm) Ø D1 Ø D2 L1 L2 L3 L4 H/flats Standard Part-numbers 100% stainless steel G 1/ CBI /IA CBI /IA/BF NPT 1/ CBI /IA CBI /IA/BF G 1/ /IA.1101/IA/BF G 3/ /IA.1102/IA/BF NPT 1/ /IA.1201/IA/BF Rc 1/ /IA G 3/ CBI /IA CBI /IA/BF CBI 09 NPT 3/ CBI /IA CBI /IA/BF G 1/ CBI /IA NPT 1/ CBI /IA CBI 12 G 1/ CBI /IA CBI /IA/BF NPT 1/ CBI /IA CBI /IA/BF CBI 16 G 3/ CBI /IA CBI /IA/BF NPT 3/ CBI /IA CBI /IA/BF G CBI /IA CBI 25 G 1 1/ CBI /IA NPT CBI /IA NPT 1 1/ CBI /IA 90 female thread (not available for NPT thread) G 1/ /IA/RE NPT 1/ /IA/RE CBI 09 G 3/ CBI /IA/RE Male thread G 1/ /IA.1151/IA/BF (not available for M 16 x 1.5 thread) G 3/ /IA M 16 x 1,5 24 cone for tube Ø 10 mm /IA CBI 09 G 3/8 G 1/ CBI /IA CBI /IA/BF CBI /IA CBI 16 G 3/ CBI /IA CBI 25 NPT 1 1/ CBI /IA 7
8 Part-numbers Sockets Designation Model Thread or int. Ø Dimensions (mm) Part-numbers Ø D L1 L2 L3 L4 H/flats Standard 90 male thread G 1/ /IA/RE (not available for M 16 x 1.5 thread) G 3/ /IA/RE M 16 x 1,5 24 cone for tube Ø 10 mm /IA/RE CBI 09 G 3/ CBI /IA/RE For rubber hose Ø 10 mm /IA For self-locking hose Ø 3/ /IA/CN CBI 09 Ø 1/ CBI /IA/CN 90 for self-locking hose Ø 3/ /IA/CN/RE CBI 09 Ø 1/ CBI /IA/CN/RE 8
9 Part-numbers Plugs Female thread Designation Model Thread CBI 03 Dimensions (mm) L1 L2 L3 H/flats Standard Part-numbers 100% stainless steel G 1/ CBI /IA CBI /IA/BF NPT 1/ CBI /IA CBI /IA/BF G 1/ /IA.7101/IA/BF G 3/ /IA.7102/IA/BF CBI 09 G 3/ CBI /IA CBI /IA/BF CBI 12 G 1/ CBI /IA CBI /IA/BF NPT 1/ CBI /IA CBI /IA/BF CBI 16 G 3/ CBI /IA CBI /IA/BF NPT 3/ CBI /IA CBI /IA/BF G CBI /IA CBI 25 G 1 1/ CBI /IA NPT 1 1/ CBI /IA BSP male thread with and integrated sealing CBI 03 G 1/ CBI /IA CBI /IA/BF G 1/ /IA.7151/IA/BF G 3/ /IA CBI 09 G 3/ CBI /IA CBI /IA/BF CBI 12 G 1/ CBI /IA CBI /IA/BF CBI 16 G 3/ CBI /IA CBI /IA/BF CBI 25 G 1 1/ CBI /IA Extended, BSP male thread with and integrated sealing G 1/ /IA/64 G 1/ /IA/80 G 1/ /IA/110 9
10 Part-numbers Plugs Dimensions (mm) Part-numbers Designation Model Thread L1 L2 H1/ flats H2/ flats Panel drilling Ø Max. panel thickness Standard 100% stainless steel Panel mount, BSP male thread with CBI 03 G 1/ CBI /IA CBI /IA/BF G 1/ /IA.5151/IA/BF CBI 09 G 3/ CBI /IA CBI /IA/BF CBI 12 G 1/ CBI /IA CBI /IA/BF CBI 16 G 3/ CBI /IA CBI /IA/BF Conical male thread NPT 1/ /IA NPT 3/ /IA R 1/ /IA CBI 09 NPT 3/ CBI /IA R 3/ CBI /IA CBI 12 R 1/ CBI /IA CBI /IA/BF CBI 25 NPT 1 1/ ,5 55 CBI /IA 10
11 Sealing Fluorcarbon (FPM), Ethylene-Propylene (EPDM) and Perfluoroelastomer (FFKM) seals are available on all models. Add the corresponding code to the socket and plug part-numbers: JV: Fluorocarbon seals JE: Ethylene-Propylene seals JKV: Perfluoroelastomer seals in the fluid stream Ex.: CBI /IA/JV Protective dust caps (To be separately ordered) Available for all the models. Socket dust cap part-numbers: CBI xx.8500 Plug dust cap part-numbers: CBI xx.8550 KES sealing kits the symbol 7 and 8. KES sealing kits consist of a retaining ring and an O-ring to create a perfect seal between the socket and its base. Part-numbers that are compatible with this option are indicated with in the part-number tables on pages Select the ring and seal materials depending on your application, using our new documentation KES P 003. Overall dimensions in coupled position L = (L1 socket + L1 plug ) X Model X (mm) Model X (mm) CBI CBI CBI CBI CBI KES sealing-kits All fluids KES are to be separately ordered. 11
12 For contact details: Global presence of the Stäubli Group Stäubli units Agents International sales coordination Stäubli Faverges - CS F Faverges - Tel.: Fax: connectors.sales@staubli.com Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries. Stäubli 24/06/2016. Printed on FSC paper. We reserve the right to modify product specifications without prior notice. Photocredits: Stäubli, Fotolia.com / Fir. RD C
CBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, glycol water, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
CBI Cooling - Temperature regulation
CBI Cooling - Temperature regulation Non-spill flat-face pollution preventing technology cold water, glycol water, hot water, steam, mineral or synthetic heat transfer oil, lubricating oil, gas circuits:
Working Pressure PB = 35 bar, maximum static working pressure with safety factor of 4 to 1.
RECTUS Series 21KB Technical Description Mini industrial coupling, internationally the most coon profile for this nominal diameter, in double shut-off design. Above average flow performance for liquid
CAT GB. Quick-release couplings and accessories for Air Conditioning & Refrigeration. UNI EN ISO 9001 Cert. n 2905 ISO/TS 16949
CAT. 0118-GB Quick-release couplings and accessories for Air Conditioning & Refrigeration UNI EN ISO 9001 Cert. n 905 ISO/TS 16949 Quick-release couplings and accessories for Air Conditioning & Refrigeration
Technical Description Standard design with ball locking mechanism for high pressure applications. Rugged construction.
Ball Locking Parker 1/4" up to 3/4" SM-Series Technical escription Standard design with ball locking mechanism for high pressure applications. Rugged construction. dvantages size 1/2" and above feature
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
ROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher
Operating, Servicing, and Safety Manual Model # 100 Standard Hydraulic Tubing Notcher Model #100-U Heavy Duty Hydraulic Tubing Notcher Model # 100 Standard Model #100-U Heavy Duty CAUTION: Read and Understand
A Higher Level of Performance. Data Sheet. Series Pressure and Level Transmitters. For more information, please visit >
A Higher Level of Performance Data Sheet Series 000 Pressure and Level Transmitters For more information, please visit > www.hawkmeasure.com Series 000 000-SAN Cable with separate electronics Description
Relative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 The compact type 528 pressure transmitter is based upon the Huba Control developed and since over 20 years well proven ceramic technology. These transmitters
ED701 General Industry Pressure Transmitter
ED701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Pistol models and angle models with flat angle head, 90 angle head, worm drive Torque range: from 6
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard
Engineering Data Single Reduction Parts List Item # Description Basic Single Reduction Unit 1. Gear Housing 2. Pipe Plug 3. Vent Plug 4. Splash Guard 5. Input Cover 6. O-Ring 7. Hex Head Cap Screw 8. Input
FITTINGS. Pneufit C composite and Pneufit M fittings Metric Ø 3 to 16 mm O/D tube
Ø 3 to 16 mm Releasable stainless-steel grab-ring to grip nylon or polyurethane (8 or 9 durometer). Nickel plated brass components. Pre-applied thread sealant on all taper threads and recessed captive
Repair Manual 12 PL PILOT
Repair Manual 12 PL PILOT 12 PL PILOT REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Disassembly... 3 Assembly... 7 Testing... 11 NOTE: We reserve the right to modify or change, without
SINGLE SHUT OFF QUICK RELEASE COUPLINGS
233 Series C = 0,844 v 0 200 400 600 Compact robust construction High flow, low drop Wide range of connections C = 0,844 v 0 3 6 9 12 15 18 21 5 = 20mm 2 560 l/min ( inlet, drop bar) Rectus 21, Rectus
Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic Pressure Measurement Intrinsically Safe Pressure Transmitter for applications in hazardous environments and shipbuilding industry Model IS-20-S, IS-21-S, IS-20-F,
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY
Versatility for any requirement Air screwdrivers and nutrunners without clutch CD PRSF and AS, AN, AY Torque range: from 6 up to 1 Nm Pistol models and angle models with flat angle head, 90 angle head,
E.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST
E.C. HOPKINS LTD PGO4 PEANUT GRINDER OPERATORS MANUAL AND PARTS LIST E.C. HOPKINS LTD UNIT 1, 82 KETTLES WOOD DRIVE, WOODGATE BUSINESS PARK, WOODGATE VALLEY, BIRMINGHAM B32 3DB TEL NO. +44 (0)121 506 6095
SOCKET & NIPPLE. Quality products for a quality environment BSP THREADED FITTINGS - PP. Code K12. Socket - equal Injection moulded.
BSP THREADED FITTINGS - PP SOCKET & NIPPLE Code K12 Socket - equal 1/2 to 3 Material: PP black Socket - reduced 1/2 up to 4 in various increments Material: PP black Nipple - equal 1/2 to 4 Material: PP
Wheeler Rex Ashtabula, Ohio Tel: Fax:
Wheeler Rex Ashtabula, Ohio Tel: 800 321 7950 Fax: 440 992 2925 wheeler@wheelerrex.com www.wheelerrex.com December 2012 There are three different types of shell cutters. Nominal Hole Size Part No. 4" 3395
tubing & fittings section guide
tubing & fittings Increasing demands for purity and reliability make the correct selection of materials essential. Used in a wide range of applications and industries such as electronics, chemical processing
Check valve type RK and RB
Check valve type RK and RB Product documentation Screw-in valve Operating pressure pmax: Flow rate Qmax: 700 bar 620 lpm D 7445 02-2017-3.1 by HAWE Hydraulik SE. The reproduction and distribution of this
Assembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2
TOOLS Page Q 2 Drilling machine Drilling machine for under pressure drilling Page Q 2/1 Motorised drilling machine Page Q 2/2 Page Q 3 Changeable carbide drill (WHM) Page Q 3/1 Drilling machine Tonisco
Zero Point Clamping System. ZERO lock BALL lock
Zero Point Clamping System ZERO lock BALL lock kap3 kap 263 Technical information regarding ZERO lock Zero Point Clamping System Application The modularly designed, flexible ZERO lock Zero-Point Clamping
Electrical Temperature Measurement
Electrical Temperature Measurement Resistance Thermometers Model TR10-B, for Additional Thermowell Applications Machinery, plant and tank construction Energy and power plant technology Chemical industry
Assembly instructions
Assembly instructions Important notes on VOSS assembly instructions In order to ensure maximum performance and functional reliability of VOSS products, the respective assembly instructions, operating conditions
Relative and absolute pressure transmitter type 528
Relative and absolute pressure transmitter type 528 Pressure range -1... 0 60 bar Váš dodavatel: JSP, s.r.o. Raisova 547 506 01 Jičín JSP Měření a regulace www.jsp.cz tel.: +420 493 760 811 fax: +420 493
2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
H4670/42192 Submersible Trash Pump
SERVICE MANUAL H4670/42192 Submersible Trash Pump Serial Code GLW Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 99916070 REV
Flush pressure transmitter For viscous and solids-containing media Model S-11
Electronic pressure measurement Flush pressure transmitter For viscous and solids-containing media Model S-11 WIKA data sheet PE 81.02 Applications Machine building Hydraulic aggregates General industrial
Pressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11
Electronic pressure measurement Pressure transmitter with flameproof enclosure For applications in explosion-protected areas Models E-10 and E-11 WIKA data sheet PE 81.27 for further approvals see page
TYPE 3740XL EXTRA LARGE WET RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
flexible couplings for pipe connections with axial restraint
www.arpol.com A R P O L F I X flexible couplings for pipe connections with axial restraint 1 TABLE OF CONTENTS Advantages & installation Sealing & anchoring system 4 5 Nominal charts 6 Material specifications
Bernoulli grippers OGGB
Key features General Purpose Benefits Applications The Bernoulli gripper OGGB is ideally suited to transporting thin, extremely delicate and brittle workpieces. Minimised workpiece contact, gentle workpiece
FAS 10 mm PICOSOL Direct acting solenoid valve
FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),
SM-10. Features. Variable Area Flowmeter with Sight Glass for Small Flow Volumes. Description: Application: / Indication without power supply
SM-10 Variable Area Flowmeter with Sight Glass for Small Flow Volumes Description: Features / Indication without power supply The SM-10 series of flowmeters operates according to the proven variable area
XXXX e. X d.. X X X a
The Heavy uty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
INDUSTRIAL PRESSURE TRANSMITTER
ECT 87 INDUSTRIAL PRESSURE TRANSMITTER Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic transmitter
SETTING UP THE MODEL 210B-2 SRA
SETTING UP THE MODEL 210B-2 SRA SAFETY PRECAUTIONS FOR THE MODEL 210B-2 SRA System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris:
THREAD PROTECTORS & END CAPS
Sir William Smith Road, Kirkton Industrial Estate, Arbroath, Angus, Scotland, U.K. DD11 3RD Tel: +44 (0) 1241 877776. Fax: +44 (0) 1241 871037 E-mail: sales@pioneeroiltools.com Website: www.pioneeroiltools.com
XXXX e. X d.. X X X a
The Heavy Duty incremental encoder type 0H boasts a high degree of ruggedness in a very compact design. Its special construction makes it perfect for all applications in very harsh environments. / RoHS
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
LPK1550 Hydraulic Crimping Tool 15-ton
SERVICE MANUAL LPK1550 Hydraulic Crimping Tool 15-ton Serial Code FYF Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register
Hose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
TYPE 3740/3740D WET/DRY RUNNING CARTRIDGE SPLIT SEAL
1 Foreword These instructions are provided to familiarize the user with the seal and its designated use. The instructions must be read and applied whenever work is done on the seal, and must be kept available
High Precision Air Chucks
Precision Workholding Solutions High Precision Air Chucks www..com Improve productivity and lower the cost of secondary machining operations..... through high concentricity. Holding close concentricity
H8508 Impact Wrench SERVICE MANUAL. Model (Serial Code FWN) Model (Serial Code FWP)
SERVICE MANUAL H8508 Impact Wrench Model 48755 (Serial Code FWN) Model 48760 (Serial Code FWP) Read and understand all of the instructions and safety information in this manual before operating or servicing
DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
MetFit MECHANICAL FITTINGS
MECHANICAL FITTINGS ENGINEERED FOR DEPENDABILITY HOW THEY WORK & WHY THEY ARE DIFFERENT CONSISTENT, REPEATABLE INSTALLATION Simple one-step squeezing motion COMPENSATES FOR COLD FLOW Ring maintains continuous
EN your reliable connection. Special blind rivet nuts
EN 9100 Tubtara your reliable connection Special blind rivet nuts Geometry and mechanical values Dejond is manufacturing a wide range of blind rivet nuts with trademark TUBTARA. The standard programme
Installation and Operating Instructions
Man.rev...0 Installation and Operating Instructions Contents : TECHNICAL DATA OPERATION, CONSTRUCTION AND PARTS LIST DIMENSIONS MOUNTING PROTECTION KITS. SPECIAL INSTRUCTIONS FOR THE SAFE USE DOCUMENTS
TYPE 3740 WET RUNNING CARTRIDGE SPLIT SEAL Technical Specification
A Mating Ring B Mating Ring Adapter Assy. C Sealing Element Gasket D Sealing Element Strip E Sealing Element O-ring F Set Screw G Primary Ring H Retaining Ring I Spring Adapter Assy. Set J O-ring (Split)
Accessories for high-pressure cleaners
Accessories for high-pressure cleaners Practical and diverse Accessories for high-pressure cleaners 70 Effective cleaning without splashing water Floor cleaner Round Cleaner UFO short Ø 300 mm Round Cleaner
SPECIALTY SMART N CLEVER PRODUCTS
REVERSIBLE DRUM ANGEL 316L STAINLESS STEEL REVERSIBLE DRUM ANGEL Empty or fill a 55-US gallon drum (45 Imperial/205L) in under 90 seconds! Reversible unit fills and empties a drum SMART N CLEVER MORE THAN
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
Installation Instructions
MOUNT TUB SYSTEMS HAMPTON TRIM KIT T980.702 Installation Instructions T980.702 T980.712 T980.722 T980.732 Thank you for selecting American-Standard...the benchmark of fine quality for over 100 years. To
JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
sales@jumo.co.uk info.us@jumo.net Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g.
TRAV-L-CUTTER Pipe Cutter
TRAV-L-CUTTER Pipe Cutter Horizontal and vertical c utting Fast and accurate cutting and beveling Add mounting chain sections to fit larger diameters COLD CUTTING, COMPACT DESIGN, EASY SET-UP The Wachs
Magnetic Inductive Flow Sensor induq
Operating manual (Translation) Operating manual... page 1-16 Magnetic Inductive Flow Sensor induq Series VMZ SIKA Ba_VMZ_en 10/2014. Please keep this operating manual for future reference. If the device
Annexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs
Product Descriptions and Codings Adaptors and Reducers The AD-U series adaptors and RD-U series reducers each comprise a metallic, hexagonal, hollow body with an external male thread and an internal female
WINCH OPERATING PRACTICES 1. Read the manufacturer's instructions before operating the winch. 2. Always inspect, test maintain and operate this winch in accordance with American National Standards Institute
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
Understanding pipe threads: types and designations
WHITE PAPER 8008 Understanding pipe threads: types and designations By Mark Schmidt Applications Engineer CPC (Colder Products Company) Different types of screw threads have evolved for fastening and hydraulic
NEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
Brass Compression Fittings
15 Brass Compression Fittings Product Applications For use with potable water, instrumentation, hydraulic and pneumatic systems. Designed to be used with aluminum, copper and plastic tubing. Not recommended
DMP 343. Industrial Pressure Transmitter. Without Media Isolation. appmeas.co.uk +44 (0)
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
Installation Instructions
Contemporary Round Floor Mounted Tub Filler Thank you for selecting American-Standard... the benchmark of fine quality for over 00 years. To ensure that your installation proceeds smoothly-- please read
HANDHOLE SEAT GRINDER
1041-1601 HANDHOLE SEAT GRINDER OPERATING INSTRUCTIONS & SERVICE MANUAL Rev: A, 9/17/2007 TO REDUCE THE RISK OF INJURY AND EQUIPMENT DAMAGE USER MUST READ AND UNDERSTAND OPERATOR S MANUAL. Thomas C. Wilson,
Power Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
DRILLING & WORKING TOOLS
EAGLE EQUIPMENT SUPPLIES & SERVICES PTE LTD 48 Toh Guan Road East #06-107 Enterprise Hub, Singapore 608586 Tel : (65) 6795 2411 Fax: (65) 6795 5877 Email: eesss@singnet.com.sg Company Registration (UEN)
SETTING UP THE MODEL 210B
SETTING UP THE MODEL 210B SAFETY PRECAUTIONS FOR THE MODEL 210B System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris: During boring,
Series 760 Heavy Duty Fixed Displacement Motor. Parts and Repair Manual
Series 760 Heavy Duty Fixed Displacement Motor Parts and Repair Manual Series 760 Fixed Displacement Motor Contents Introduction 3 ID Tag Information 3 Parts List 4 Parts Drawing 5 Disassembly Instructions
A SRF/SERF A SRF/SERF
A1100-055SRF/SERF A1100-056SRF/SERF Remote Fill Assembly INSTALLATION INSTRUCTIONS **CRITICAL - MUST READ** This unit can only be used for new installations or tank level retrofits that allow access to
SETTING UP THE MODEL 85B
SETTING UP THE MODEL 85B SAFETY PRECAUTIONS FOR THE MODEL 85B System Under Pressure: Shut off air supply and disconnect air hose before disassembling or disconnecting parts. Flying Debris: During boring,
This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.
SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Square Free Standing Floor Mount Tub Filler Model D35900900 Thank you for selecting DXV. To ensure that your installation proceeds smoothly, please read these instructions carefully
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS
4.2 - PUMP MAINTENANCE MODELS: AC, AS, WC, WS 4.2.1 - EXPLODED VIEW DRAWING REF NO. 1 2 4 QTY 3 1 1.5 5 ¾ HP HP HP HP HP DESCRIPTION PART # 1 CASE 1.25 x 1 NPT 018266 1 CASE 1.25 X 1 NPT 018268 1 CASE
Service instructions. CR, CRI, CRN 10, 15 and /60 Hz 1/3~
Service instructions CR, CRI, CRN 10, 15 and 20 50/60 Hz 1/~ 1. Type identification... 2 1.1 Nameplate... 2 1.2 Type key... 1. Code for shaft seal... 4 2. Tightening torques and lubricants... 5. Service
5.1 MUELLER CORPORATION VALVES. MUELLER 300 Ball Type Corporation Valves
MUELLER CORPORATION VALVES 5.1 Shaded area indicates changes Rev. 4-14 Machine inserted corporation stops were developed by Hieronymus Mueller in conjunction with his development of the drilling and tapping
50, 75, & 150 PG PILOT
Repair Manual 50, 75, & 150 PG PILOT 50, 75, & 150 PG PILOT REPAIR MANUAL INDEX Introduction... 1 Elastomer Materials... 2 Disassembly... 3 Part Inspection... 6 Assembly... 7 Testing... 11 NOTE: We reserve
BP Brine Pro Brine Maker. Parts List. This Parts List is for BP-2000 brine makers with serial numbers beginning with and higher.
November, 0 Lit. No., Rev. 0 BP-000 Brine Pro Brine Maker Parts List This Parts List is for BP-000 brine makers with serial numbers beginning with 00 and higher. A DIVISION OF DOUGLAS DYNAMICS, LLC FRAME
Industrial Pressure Transmitter
Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economic transmitter ECT
CONSTRUCTION PRODUCT TECHNICAL CARD
CONSTRUCTION PRODUCT TECHNICAL CARD Product feature: Manufacturer: Flowmeters included ASPOL-FV Łódź, Helska st.39/45 www.aspol.com.pl Energeo product: New BRADO R Distributor well with multi-sectional
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS
TOOLS FOR THE SPECIALIST UNDERWATER TOOLS PNEUMATIC TOOLS Performance data at an operating pressure of 6 bar (cont. flow). ANGLE GRINDER This handy angle grinder is particularly usable in tight spaces
Magnetic level indicators made in Australia under licence to Weka AG of Switzerland.
ABN 24 080 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 (0)2 9542 8977 fx: +61 (0)2 9542 7978 www.controlcomponents.com.au Magnetic level indicators made in Australia under licence to
Rotary Drilling/Vibrator Hose - API 7K FSL 1 & ISO Black synthetic rubber with high abrasion, weather and heat resistance
JGB Enterprises Goldendrill Rotary Petroleum Hose Rotary Drilling/Vibrator Hose - API 7K FSL 1 & ISO 14693 Application: Flexible connection between standpipe and swivel (rotary drilling) or between pump
MSR/MSB Mechanical Setting Tool
Tech Unit No: 0620000004 Revision: B Approved By: Quality Engineer Date: 2014-12-16 MSR/MSB Mechanical Setting Tool FEATURES: Special designed Bow Spring provides positive control and allows one size Mechanical
2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.8... 4 mm Port connection 1/8, 1/4 or sub-base Type 2873 can be combined with Type 8605 Digital
Operating & Maintenance Instructions 320 Dome Blowing Unit
Operating & Maintenance Instructions 320 Dome Blowing Unit Table of Contents 1. On Delivery... 2 2. General Information... 3 3. Dome Blowing Technique... 4 4. Other Shapes... 6 5. Machine Maintenance...
Products catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
Table of Contents. B. Base Tool Changer...2 MC-36 Manual Tool Changer...2
Table of Contents B. Base Tool Changer...2 MC-36 Manual Tool Changer...2 1. Product Overview... 2 1.1 Master Plate Assembly... 2 1.1.1 Optional Ratchet Knob... 2 1.2 Tool Plate... 3 1.3 Optional Modules...
PARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
Switching. Radar. Overview 114 VEGAMIP series Mounting adapter 120
Switching Radar Overview 114 VEGAMIP series 60 116 Mounting adapter 120 113 VEGAMIP Level detection in bulk solids and liquids Measuring principle The measuring system consists of a microwave emitter and
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
400 SERIES GRINDER PUMPS 41502, 42202,43302, AND MODELS
Section: MOYNO 500 PUMPS Page: 1 of 6 Date: March 1, 1998 SERVICE MANUAL MOYNO 500 PUMPS 400 SERIES GRINDER PUMPS 41502, 42202,43302, AND 44402 MODELS DESIGN FEATURES Housing: Cast iron Pump Rotor: Chrome
Hardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
BENEFITS HAND-OPERATED BAILER BORING EQUIPMENT P SA Hand operated bailer boring set
In less-cohesive soils, below the groundwater level, a bailer and synthetic casing tubes can be used. For ergonomic reasons a casing tube platform is used. For drilling into the ground and taking soil